Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

The Harris County Flood Control District is seeking qualified candidates for the role of Equipment Operator II.
Reporting to the Crew Leader, the Equipment Operator II is responsible for operating various small engines and moderate to heavy equipment used to maintain clear channels, drainage elements and right of ways in accordance with the District’s mission to maintain the Infrastructure.
Job Duties: Operate trucks and equipment including spray equipment, tractors, chainsaws, 4-wheel drive extreme utility vehicles (XUV) and weed trimmers. Mix herbicide(s) in accordance with manufacturer and District’s formulas and instructions and dispense from truck, tractor, XUV or from backpack. Clean and repair all spray equipment and properly store herbicides and supplies. Cut weeds, grass, and brush in, along and around channels, drainage elements and right-of ways using equipment designated for that purpose. Dislodge and remove drifts and debris (trees, limbs, brush, vines, trash and refuse) from channel berms, slopes and bottoms for proper disposal. Drive trash truck to and from job sites, dump sites or landfills. Check and maintain all equipment fluids, perform daily inspection(s) and fuel and wash equipment, as needed. Report necessary replacement or repair of defective equipment to supervisor. May perform other duties that can be added or changed as the course and scope of the job directs.
The following list of benefits is offered only to employees in regular (full-time) positions: Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular (full-time) employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)
Requirements: High school diploma or G.E.D. equivalent Two (2) years’ experience in field operations or a related field Some knowledge of bayou, drainage area and right-of-way maintenance including, but not limited to, mowing, application of various herbicides, cutting and clearing brush and debris removal (preferred) Valid Class "C" Texas Driver’s License. Valid Class “B” Commercial Driver’s License. (preferred) Valid Texas State licensed ATV Operator to operate four-wheel vehicles with trailer. (preferred) Valid Texas State Commercial or Non-commercial Pesticide Applicator License. (preferred) Good verbal & written communication skills. Can effectively communicate with coworkers and the public. Good analytical skills in applying guidelines and adapting standard methods to fit facts and conditions. Ability to work in an outdoor setting. Familiarity with operating gasoline- powered equipment and off-road vehicles. Ability to work well with a team in a field environment. Can work independently with limited to no supervision.
Physical Demands and Environmental Exposure: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: Frequent walking up and down steep slopes of ditches or on rough and uneven Frequent stooping, bending, reaching, lifting, and carrying of items up to 11 pounds and occasional lifting of up to 50 pounds. Frequent driving of a vehicle with automatic controls and four-wheel drive. Occasional walking up and down steep slopes of ditches or on rough and uneven surfaces or ground such as sloping terrains, plowed or furrowed areas or construction sites. 100% of duties are performed outdoors where there will be routine exposure to significant levels of heat, cold, moisture, air pollution, wind, and dust. May be exposed to vegetation retardants, herbicides and fertilizers, petroleum products including but not limited to gasoline, oil, grease, diesel and other fuels and lubricants, snakes, wildlife, wasps, bees and other flying or walking insects, aquatic bacteria, viruses and other microorganisms, and vibration or noise in excess of 85 decibels.
NOTE: Qualifying education, experience, knowledge, and skills must be documented on your job application. You may attach a resume to the application as supporting documentation but ONLY information stated on the application will be used for consideration. "See Resume" will not be accepted for qualifications.
The Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The Flood Control District has jurisdiction over the primary stormwater facilities in the county, which consist of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks including Greens bayou.   Harris County is an Equal Opportunity Employer

Experienced Seafood Processors needed for our shore-based production plants located in Dutch Harbor, Alaska For Westward Seafoods and The Northern Victor. You will need to apply and attend a Virtual Interview.
Work will begin the 1st week of June! Interviews going on now for direct hire & June start. Beat the summer heat, cool off and make money working in Alaska for Westward Seafoods.
WSI processes several species of seafood including Pollock, Crab, Pacific Cod, Halibut and Sablefish. Production employees process raw product that is delivered from fishing vessels to sell to customers. Processors can be assigned to various positions within the production department including, but not limited to: butchering, sorting, filleting, and case-up. Processors are also required to participate in plant clean-up, and other duties as assigned.
This position requires the candidate have the ability to perform the physical requirements including; standing in place for long periods of time; repetitive motions using hands, arms, legs, and back; regularly lift and move 50 lbs; frequent rotations and twisting at the waist; frequent climbing and descending of stairs; working long hours in cold/wet environments (12+ hours per day, 7 days a week); and prompt and regular attendance. Overtime is available.
WSI has a zero tolerance policy for drugs and alcohol. You will be charged $20 per day for room and board. (This Could Change before the start of the season) Will be deducted from your paycheck. All WSI employees are required to wear protective safety gear where required and are responsible for promoting and maintaining a safe working environment for self and others. Shifts will vary depending on fish, and processors must be prepared to work 7 days a week for up to 18 hours per day. There may also be periods of time when there are few or no hours of work.
Pay for 2025 B Season will be $17.00 an hour, and overtime is $25.50.
Room and Board: You will be charged $20 per day for room and board. (This Could Change before the start of the season) Will be deducted from your paycheck.
WSI will pay for your flight from Seattle, WA to Dutch Harbor, Alaska. Point of Hire is Seattle, WA.
Benefits: Transportation to/from Point of Hire 401(k) Medical upon eligibility $20/day for room and board (this includes 3 meals a day from our company cafeteria) Onsite Laundry Facilities
Qualifications: Must be at least 18 years of age Must pass a post-offer drug screen and physical Must be able to stand and work for long hours in an often wet and cold environment. Must be able to repeatedly lift up to 50 pounds. Must have a basic understanding of English, including the ability to follow written or oral instructions. Must be able to climb stairs, and stand and walk on uneven and slippery surfaces. Must be willing to work any shift, including nights. Processing employees must be able to walk quickly to designated areas in the event of an emergency, and must be able to follow emergency instructions. All WSI employees must be willing to work and live in a multicultural environment.
Please email Rhianna@JobSparx.com if you encounter any problems with the online application process.
Westward Seafoods is an equal-opportunity employer. We consider applicants for all positions without regard to race, religion, creed, national origin, age, disability, marital or veteran status, or any other basis prohibited by applicable law.

Daily Instruments is seeking an AutoCAD Drafter to join our rapidly growing design and production team. The Drafter will be responsible for coordinating onsite work with the sales support team, engineering team, designers, purchasing/requisitions and special project team personnel, as well as working alongside production management staff. The successful Drafter will ensure that projects are completed safely and accurately, and in a timely manner to meet customer and shipping goals.
Full-Time | On-Site In-Person | Monday–Friday, 8AM–5PM (flexible schedule to accommodate two production shifts)
Job Duties: Manage the project work plan process to ensure accurate and timely completion of production goals Perform Engineering calculations involved with design, drafting or product; and all engineering changes Coordinate with customer specification, needs to ensure all sales and resulting work orders are in compliance with those requirements Strict compliance and enforcement of all ISO, QA, contractual, and client requirements Read and understand technical drawings, schematics Create drawings for customers, Sales Department, Engineering or any other as required. Create, update and correct drawings for submission to customers. Create Vendor Data books for submission to customers. Maintain drawing number log, of drawings made for sales, purchasing, manufacturing, clients Coordinate work with and directly communicate with multiple disciplines including engineering, manufacturing, purchasing, welders, and other production staff Inside Sales and/or Engineering point of contact and interface with Sales Support, vendors, clients, customers, other company departments, production.
Benefits: 100% Company paid Employee Only HDHP Medical. 100% Company paid Life Insurance. 401K with Employer Match. Medical Plan options available (two medical plans, dependent/family coverage options) Health Savings Account with Employer contribution. Flexible Savings Account. Optional Benefits: Dental, Vision, Supplemental Life Insurance, Disability, Accident plans
Qualifications: Must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Must be fluent in English with ability to communicate highly technical terms/ideas; any other language skills are beneficial Drafting, Technical or Engineering background and/or education, required Computer Aided Drafting (CAD) competency (preferably AutoCAD). Ability to read and interpret Engineering drawings. Familiarity with machine shop, working in a manufacturing/fabrication environment Familiarity with Production Planning or Scheduling, preferred Excellent technical communication skills, verbal and written Understanding of ASME codes and NDT processes Understanding of GD&T and welding symbols Self-driven initiative to respond to fluid work environment and rapidly changing priorities Proficient computer skills, including Microsoft Office Enthusiastic team player, Creative thinker, focus on bottom-line results while managing for Total Quality Assurance Compliance
Physical Requirements: Physically able to walk and maneuver about as needed, on the shop floor, inventory stockroom, and or shipping loading dock. Prolonged periods of sitting at a desk and working on a computer. Must be able to lift up to 50 pounds at a time.
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

The Crew Leader is responsible for providing leadership, direction, and safety to a team of crew members performing field maintenance operations. This role also ensures proper equipment and supplies are assigned to the crew for task completion in accordance with the District’s mission to maintain the Infrastructure.
Job Duties: Oversee and direct a crew of field personnel which includes laborers and equipment operators. Delegate work assignments and instructions to crew members in accordance with the Production Supervisor’s instructions for program requirements such as herbicide spraying, channel clearing and debris removal. Work alongside crew members and operate equipment as needed to ensure production goals are met. Ensure site trucks are loaded with the proper supplies and crew members have the proper safety equipment before heading to the work site. Perform job site safety analysis (JSA) and crew safety awareness talks (tailgate meetings) to ensure all crew members are aware of site conditions and potential hazards prior to start of work. Record daily work production by task including completion of work order forms and pictures of work in progress. May perform other duties that can be added or changed as the course and scope of the job directs.
The following list of benefits is offered only to employees in regular (full-time) positions: Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular (full-time) employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)
Requirements: High school diploma or G.E.D. equivalent Valid Class "C" Texas Driver’s License Three (3) years’ experience in field maintenance, mowing, landscaping, herbicide application, farming, horticulture, or a related field. One (1) year supervisory experience in a field environment. Good verbal & written communication skills. Can effectively communicate with coworkers and the public. Good organizational, and managerial skills. Good time management skills and can effectively prioritize and schedule multiple tasks and initiatives. Ability to work well with a team in a field environment. Ability to work in an outdoor setting. Ability to load, unload and safely transport equipment to job sites using a truck and trailer of various sizes. Ability to operate airboats and other marine equipment in difficult and low-water environments. Ability to use a variety of cutting equipment such as chain saws, weed trimmers, and machetes.
Physical Demands and Environmental Exposure: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: Frequent walking up and down steep slopes of ditches or on rough and uneven Frequent stooping, bending, reaching, lifting, and carrying of items up to 11 pounds and occasional lifting of up to 50 pounds. Frequent driving of a vehicle with automatic controls and four-wheel drive. Occasional walking up and down steep slopes of ditches or on rough and uneven surfaces or ground such as sloping terrains, plowed or furrowed areas or construction sites. 100% of duties are performed outdoors where there will be routine exposure to significant levels of heat, cold, moisture, air pollution, wind, and dust. May be exposed to vegetation retardants, herbicides and fertilizers, petroleum products including but not limited to gasoline, oil, grease, diesel and other fuels and lubricants, snakes, wildlife, wasps, bees and other flying or walking insects, aquatic bacteria, viruses and other microorganisms, and vibration or noise in excess of 85 decibels.
NOTE: Qualifying education, experience, knowledge, and skills must be documented on your job application. You may attach a resume to the application as supporting documentation but ONLY information stated on the application will be used for consideration. "See Resume" will not be accepted for qualifications.
The Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The Flood Control District has jurisdiction over the primary stormwater facilities in the county, which consist of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks including Greens bayou.   Harris County is an Equal Opportunity Employer

Harris County Flood Control District is seeking qualified candidates for the role of Equipment Operator III.
Reporting to the Crew Leader, the Equipment Operator III is responsible for operating a variety of heavy (large), mid-sized and small equipment, engines, attachments, and hand tools used to maintain the County's channels and bayous.
Job Duties: Operate heavy and/or technical equipment such as large trash trucks, airboats, skid steer, etc. Record work performed on daily activity sheets, track mileage and complete herbicide reports. Perform job hazard assessments, identify any obstacles to completing tasks and report to the supervisor. Assist in the supervision of crew members when needed. Mix herbicide(s) in accordance with manufacturer’s label and dispense from truck, tractor, or 4-wheel drive extreme utility vehicles (XUV). Dislodge and remove drifts and debris from channels, basin, and vacant lots. May perform other duties that can be added or changed as the course and scope of the job directs.
The following list of benefits is offered only to employees in regular (full-time) positions: Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular (full-time) employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)
Requirements: High school diploma or G.E.D. equivalent Two (2) years of directly related work experience Valid Class “B” CDL Texas driver’s license with tank, standard shift endorsements or TDA herbicide license. Good verbal & written communication skills. Can effectively communicate with coworkers and the public. Good analytical skills in applying guidelines and adapting standard methods to fit facts and conditions. Good diagnostic and troubleshooting skills. Can read and comprehend written materials, e.g., policies, procedures, operating instructions, and safety notices. Ability to work in an outdoor setting. Familiarity with operating gasoline- powered equipment and off-road vehicles. Ability to work well with a team in a field environment. Can work independently with limited to no supervision.
Physical Demands and Environmental Exposure: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: Frequent walking up and down steep slopes of ditches or on rough and uneven Frequent stooping, bending, reaching, lifting, and carrying of items up to 11 pounds and occasional lifting of up to 50 pounds. Frequent driving of a vehicle with automatic controls and four-wheel drive. Occasional walking up and down steep slopes of ditches or on rough and uneven surfaces or ground such as sloping terrains, plowed or furrowed areas or construction sites. 100% of duties are performed outdoors where there will be routine exposure to significant levels of heat, cold, moisture, air pollution, wind, and dust. May be exposed to vegetation retardants, herbicides and fertilizers, petroleum products including but not limited to gasoline, oil, grease, diesel and other fuels and lubricants, snakes, wildlife, wasps, bees and other flying or walking insects, aquatic bacteria, viruses and other microorganisms, and vibration or noise in excess of 85 decibels.
NOTE: Qualifying education, experience, knowledge, and skills must be documented on your job application. You may attach a resume to the application as supporting documentation but ONLY information stated on the application will be used for consideration. "See Resume" will not be accepted for qualifications.
The Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The Flood Control District has jurisdiction over the primary stormwater facilities in the county, which consist of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks including Greens bayou.   Harris County is an Equal Opportunity Employer

The Alabama-Coushatta Indian Tribal Council Employment & Training Program is a Tribal Program that was formed in 1973. The program was designed by the Department of Labor’s Division of Indian and Native American Programs (DINAP) and is managed by the Alabama-Coushatta Tribe of Texas.
Our program provides employment and training services to Native Americans/American Indians, Native Hawaiians, and Native Alaskans that reside within the 121 county service area of the State of Texas.
It is the mission of the Alabama-Coushatta Indian Tribal Council Employment & Training Program to provide quality educational and employment opportunities to our Native American/American Indian, Native Hawaiian, and Native Alaskan clients in our service delivery area by reaching out into communities and joining forces with business leaders, workforce boards, service providers, and educational institutions to ensure participants are well prepared to meet the opportunities of employment such that they may take advantage of progressive career opportunities.
You must be a member of a U.S. Federally recognized tribe with a supporting document from a federally recognized Tribe's Tribal Rolls and Records Office
Workforce Innovation and Opportunity Act Section 166, 20 CFR 684.300 (a) (1) An Indian, as determined by a policy of the INA program grantee; (2) Alaska Native; or (3) Native Hawaiian.
Our Services: EMPLOYMENT CAREER SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.
TRAINING SERVICES - Provide job readiness training as a means of better preparing Native Americans for the workforce.
EDUCATION SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.

The Harris County Flood Control District is seeking exceptional, detail-oriented and qualified candidates for the role of Utility Coordinator.
The Utility Coordinator is responsible for overseeing the District's private utility coordination including utility conflict identification, relocation, and necessary pay-out items. This position will also assist and work closely with the District's project managers and utility sub- consultants in tracking private utility projects.
Job Duties: Oversee the review of design plans and the utility conflict table for accuracy. Issues utility notifications and coordinates office/field meetings with team members, external utility representatives, and consultants when needed. Process all purchase order requests including follow-up and distribution. Create and distribute all department correspondence including letters, memos, requests for invoices, etc. Coordinate agenda items for Commissioners' Court, including after court action items. Maintain, track and resolve issues with utility relocation schedules to ensure completion of tasks by agreed-upon dates. Provide bi-monthly status update reports and leads the utility coordination & management team status update briefings. Oversee contractor’s workload, assist in prioritizing tasks to ensure deadlines are met. Lead and participate in department initiatives and process improvements. Perform other duties that may be added or changed as the course and scope of the job directs.
The following list of benefits is offered only to employees in regular (full-time) positions: Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular (full-time) employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)
Requirements: Bachelor’s degree from an accredited four-year college or university in Civil Engineering, Construction Management, or a similar curriculum (preferred) Five (5) years of experience with utility coordination or a related public works field Experience working with government agencies and their governing bodies (preferred) Professional Engineer Registration (State of Texas) Valid Class "C" Texas Driver’s License Professional Engineer (PE) in the state of Texas (preferred) Excellent written and verbal communication skills Excellent organizational and managerial skills Can work independently with limited supervision Ability to prioritize and manage multiple projects and/or assignments Excellent knowledge of Microsoft Office applications Good diagnostic and analytical skills Excellent skills using project management tools and systems. Solid knowledge/understanding of Federal, State, and local rules, regulations and standards related to engineering and construction management. Can work well with the public, interest groups, government agency personnel and external organizations.
NOTE: Qualifying education, experience, knowledge, and skills must be documented on your job application. You may attach a resume to the application as supporting documentation but ONLY information stated on the application will be used for consideration. "See Resume" will not be accepted for qualifications.
The Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The Flood Control District has jurisdiction over the primary stormwater facilities in the county, which consist of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks including Greens bayou.   Harris County is an Equal Opportunity Employer

The Harris County Flood Control District is seeking qualified candidates for the role of Watershed Plan Reviewer.
The Watershed Plan Reviewer is responsible for reviewing, researching, and modifying private sector development projects, plats, and public sector infrastructure projects for the Watershed Management Department to ensure compliance with the District’s design criteria and watershed management plans in accordance with the District’s mission to maintain the Infrastructure.
Job Duties: Review government capital improvement and private sector development plans (including subdivision, site, detention, channel, bridge and other drainage related plans and plats) to confirm compliance with the Flood Control District’s criteria and policies in the Policy, Criteria, & Procedures Manual (PCPM). Research letter files, design reports, aerial photos, record drawings and other resources to support plan review efforts. Provide preliminary District review and approval of all commercial and residential construction plans. Assist the Watershed Coordinator by providing interdisciplinary plan review of development projects to ensure compliance with the District’s PCPM, Master plans, capital improvement projects, maintenance activities, Harris County Precinct activities and FEMA regulations. Communicate effectively with design engineers and the public by telephone, letter, plan mark-ups and in person to explain plan review efforts and objectives. Coordinate with other District and County departments, including Harris County Permits Office, in support of regulations and permitting activity for government and private sector construction development plans. Perform field visits as necessary to confirm compliance with the District’s design criteria and standards. Attend initial planning meetings with private sector engineers, developers, and landowners to explain the District’s policies and criteria. Ensure proposed developments comply with the District’s watershed master drainage plans. Advise management of problems and prepare recommendations for solutions using best practices. Additional Responsibilities and Duties: Attend departmental meetings and meetings with coordinating departments, consultants and agencies. Assist with the department projects, as needed. Attend seminars, conference workshops, re-certification or other training programs, as necessary. Perform other duties that may be added or changed as the course and scope of the job directs.
The following list of benefits is offered only to employees in regular (full-time) positions: Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular (full-time) employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)
Requirements: Associates degree in Engineering Technology or a similar curriculum from an accredited college or university Bachelor degree from an accredited four-year college or university in civil engineering or a similar curriculum (preferred) Five (5) years of relevant experience in land development, drainage design, drainage construction, floodplain management, or similar field. Experience with stormwater drainage design and construction and ability to read all types of maps and drawings, especially civil construction plans. Experience working with government agencies and their governing bodies. Experience with AutoCAD and GIS applications (preferred) Valid Class "C" Texas Driver’s License Excellent written and verbal communication skills Excellent interpersonal and conflict resolution skills, and the ability to deal tactfully with a diverse group of people in a professional manner in a government organization. Ability to read, interpret, create, and review construction plans, specifications, and other related technical documents. Ability to exercise flexibility in accommodating shifting priorities, demands, and schedules. Strong skills using Microsoft Office applications (Outlook, Word, Excel and Access), preferably MS Office 365 Can demonstrate continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly to provide quality seamless customer service. Be a self-starter; work well independently and as a team; assume ownership in completing assigned tasks. Ability to keep up with scientific, engineering technology, and regulatory changes at the federal, state and local level and to utilize such changes in solution of theoretical or practical civil engineering problems. Can work well under pressure adhering to tight deadlines and accuracy/quality standards. Can utilize good organizational skills and effectively prioritize and schedule multiple tasks/initiatives. Can use proper grammar, correct spelling and punctuation, simple formats and filing systems. Can effectively communicate with coworkers, general public, industry and/or governmental representatives. Write/record legible notes of activity and accurately complete required forms. Can work well with the public, interest groups, government agency personnel and external organizations.
NOTE: Qualifying education, experience, knowledge, and skills must be documented on your job application. You may attach a resume to the application as supporting documentation but ONLY information stated on the application will be used for consideration. "See Resume" will not be accepted for qualifications.
The Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The Flood Control District has jurisdiction over the primary stormwater facilities in the county, which consist of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks including Greens bayou.   Harris County is an Equal Opportunity Employer

T.G Meat Center is seeking to hire multiple meat cutters. This job requires a person to work in a cold refrigerated warehouse space. These are full-time positions, and we are looking to hire meat cutters with at least 1-2 years experience. Candidates that have experience cutting meat with commercial electric bandsaw are preferred. Work hours are 7am to 4pm, with occasional Saturdays and Overtime. All applicants will be contacted.
Benefits: Full Medical Dental Vision 401K Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: MUST be 18 years or older Able to utilize knives, saws, grinders and other equipment to perform meat cutting and trimming. Demonstrate the ability to identify different meat cuts. Willing to work individually as well as in a team. Maintain a safe environment- Personal Safety and Food Safety. Positive Attitude—makes everyone’s day better, including yours! Willing to learn and follow our processes. Ability to communicate verbally Be able to lift up to 60lbs Be physically able to load & unload a dolly or pallett Manufacturing experience is helpful, but not necessary.
T.G Meat Center  is a second chance employer. EOE. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Maintains equipment operation by completing inspections and preventive maintenance requirements; correcting vehicle deficiencies; adjusting and alignments; keeping records. Work performed on trucks, trains & heavy equipment.
Job Duties: Determines vehicle condition by conducting inspections and diagnostic tests; identifying worn and damaged parts. Keeps equipment available for use by completing preventive maintenance schedules; installing component and part upgrades; controlling corrosion; completing winterization procedures. Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics; completes machine shop operations; adjusting and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units. Verifies vehicle performance by conducting test drives; adjusting controls and systems. Complies with federal and state vehicle requirements by testing engine, safety, and combustion control standards. Maintains vehicle appearance by cleaning, washing, and painting. Maintains vehicle records by annotating services and repairs. Keeps shop equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; calling for repairs. Contains costs by using warranty; evaluating service and parts options. Keeps supplies ready by inventorying stock; placing orders; verifying receipt. Updates job knowledge by participating in educational opportunities; reading technical and regulation publications. Enhances maintenance department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Performs some physical work to include climbing, heavy lifting, and carrying Travel may be required to reach a vehicle needing repair.
Benefits: Medical Dental Vision Life Insurance 401K with Match Paid Holidays/Vacation Safety Bonus Program
Qualifications: Pre-employment drug and alcohol screening. Background screening including previous employment, education, criminal history and driving record verification. Valid Texas driver license Caterpillar experience a plus. Experience with Backhoes, Excavators, Dozers, Forklift, & Off Road Trucks.

Responsibilities: Forklift Drivers at Pol-Tex are responsible for safe operation of sit-down propane forklifts for the purpose of handling, loading, and unloading product. Drivers at Pol-Tex regularly use RF scanners and inventory control systems to pull orders, keep production lines supplied, and re-stock inventory racks. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.
Pol-Tex offers competitive compensation packages including Medical/Dental, paid vacations, paid holidays and 401(K).
If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Qualifications: One year of recent experience operating forklifts. The ability and desire to work safely. The ability to work a night shift or a day shift. 4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.

If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Pol-Tex offers competitive compensation packages including: Medical Dental Paid vacations Paid holidays 401(K)
Qualifications: The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. The desire to expand knowledge and grow with the company. The ability and desire to work safely. The ability to work a night shift or a day shift.  4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Pol-Tex International, a division of Poly-America, L.P., is currently seeking an Industrial Mechanic to join our maintenance team. Pol-Tex International’s mission is to be the safest and most efficient choice in the polyethylene recovery, recycling, and compounding industries.  Our fleet, facility, and equipment combined with our experienced and dedicated professional staff make Pol-Tex International the premier gathering and recycling center for the Gulf Coast Region. Pol-Tex International offers competitive compensation packages including Medical/Dental, paid vacations and holidays, and 401(K). Responsibilities Industrial Mechanics at Pol-Tex International are responsible for the maintenance, installation, troubleshooting, and modification of new and existing industrial converting equipment. This role will document, recommend, and execute maintenance procedures. The Mechanic will be working in a manufacturing maintenance team. At times they will complete the mechanical testing of electro-mechanical equipment. Tasks include replacing, inspecting and dismantling defective parts, and implementing upgrades and part changeovers. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. A strong desire to be hands on with their work and to follow processes through. The aptitude and desire necessary to be a good student of Pol-Tex processes, equipment, and procedures. Problem solving skills including troubleshooting of mechanical equipment.

Encuentra la Carrera perfecta y disfruta un refrescante cambio en Pol-Tex, division de Poly-America, L.P. Nuestra localidad en el area de Baytown se esta expandiendo y provee una gran oportunidad para trabajar en una industria lider en estabilidad y crecimiento.
Los empleados de produccion en Pol-Tex son responsables por la operacion segura de montacargas de gas para el proposito de manejo de cargar y descargar producto. El puesto de trabajo puede implicar responsabilidades adicionales a medida que se necesiten y/o sean asignadas por el gerente.
Responsabilidades: Operadores de montacargas en Pol-Tex son responsables por la operacion segura de montacargas sentado de gas para el proposito de manejo carga y descarga de producto. Los operadores de montacargas en Pol-Tex regularmente usan escaners RF y sistemas de control de inventario para  sacar ordenes , mantener las lineas de produccion suministradas y re llenar los bastidores de almacenamiento. La posicion puede incluir responsabilidades y oportunidades adicionales segun sean necesarias y/o asignadas por el gerente.
Calificaciones: Seis meses a un ano de experiencia reciente operando montacargas La habilidad y el deseo de trabajar de una manera segura La disponibilidad de trabajar un turno de dia o de noche. 4 dias de trabajo/ 4 dias de descanso, dias rotativos segun sean assignados. Responsabilidades adicionales y oportunidades segun sean asignadas por el gerente.

W.M. Dewey & Son, Inc. is a family-owned business that has been providing services to the oil and gas industry since 1895. We specialize in being a full-service provider of pipe transportation, pipe storage and pipe logistics services. W.M. Dewey has an immediate opening for dependable safety oriented Facilities Maintenance Helper. Who is willing to grow in knowledge and increase their responsibilities in the workplace.
Job Duties: Landscaping duties around yard (operation of lawn equipment) Perform general maintenance around the yard, shop, and office (general electrical and plumbing) Maintain shop floors for cleanliness in and around machines, tools, and equipment Operate a forklift (Training Provided) Assist Diesel Mechanics in the shop as needed (Working on tires, Large Trucks, Forklifts, Small Lawn Equipment, etc.) Order and keep inventory of all parts (some driving required) Use Company vehicle to deliver paperwork and parts between vendors and yards 50/50 Inside and Outside work
Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance
Qualifications: Maintenance experience 1 year preferred Must Have A Valid Texas Drivers License Must have a Clean Driving Record Pass a background Check Must be at least 21 years of age Must be able to lift up to 40 pounds and stand for long periods of time Must have basic Plumbing and Electrical Knowledge Must be able to operate Power tools (chainsaw, power drill, skill saw) Must have reliable transportation to and from work Bilingual (Spanish and English) is a plus but not required Weekends as needed

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. Must have Horizontal boring machine experience (HBM) This will be a 2nd shift opportunity; Overtime may be required. Responsibilities: Operating CNC Machines, BMH, Manual Machines, CNC Lathe, VTL, HBMOperating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating CNC Machines, manual lathes, milling machines.HS Diploma / GED and 3-5 years relevant experienceExperience operating LARGE machinesHBM Machine, tooling for Line Boring Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-14270 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Maquinista Manual Resumen del rol: El maquinista manual tendr un amplio conocimiento sobre un fondo diverso que ejecuta varias mquinas manuales, incluidas, entre otras, fresadoras verticales y horizontales, tornos verticales y horizontales y rectificadoras. Esta persona tendr experiencia en la configuracin y marcacin de varias partes de su mquina. El maquinista QRC de la bomba ser responsable de fabricar piezas a partir de materia prima, as como de mecanizar piezas existentes a nuevas dimensiones o mecanizar piezas reparadas. El maquinista debe ser capaz de trabajar de forma independiente y con instrucciones limitadas, pero siguiendo hojas de ruta y / o dibujos de piezas. Podrn seleccionar insertos de herramientas adecuados, velocidades y alimentaciones segn sea necesario y lo requieran para cumplir con los requisitos de la pieza y el material que se est mecanizando. Responsabilidades: El maquinista manual es responsable de configurar y mecanizar piezas y componentes para todas las bombas y equipos de coquizacin en cualquier mquina en nuestro taller. Trabajar de forma segura y ayudar a los colegas a trabajar de forma segura. Seguir el resumen previo al trabajo y todas las listas de verificacin antes de mecanizar una pieza. Seguir todos los fresadores y procedimientos de mecanizado Piezas de mquinas que utilizan mandrinadoras horizontales manuales, tornos verticales, tornos de motor, molinos, rectificadoras y taladros. Capacidad para trabajar eficientemente dentro de ventanas de tiempo fijas para cada proceso de mecanizado. Capacidad para mantener tolerancias dentro de .0005", e inspeccionar piezas usando micrmetros, medidores, etc. Capacidad para leer impresiones / dibujos y ejecutar en funcin de los datos proporcionados Fabricar herramientas y hardware como parte de la mejora continua de la instalacin. Coordinar con ventas, operaciones, ingenieros y clientes segn sea necesario. Exhibir un comportamiento que fomente la formacin de equipos, la toma de decisiones, la resolucin de problemas y las mejoras continuas. Capacidad para mecanizar una variedad de metales como aceros inoxidables de las series 300 y 400, Inconel 625 y 718, acero al carbono, etc. Cumplir con todas las polticas y procedimientos de Flowserve; especficamente en torno al tiempo y la asistencia, la seguridad y la productividad Requisitos bsicos: Diploma de escuela secundaria o equivalente. 5 aos de experiencia en mecanizado manual, incluyendo HBM y/o VTL Debe tener un conjunto personal de herramientas, micrmetros, amoladoras manuales y caja de herramientas enrollable. Capaz de permanecer de pie durante largos perodos. Demostracin de atencin al detalle y al proceso. Habilidades de comunicacin verbal y escrita en ingls competente Excelentes habilidades de organizacin, capacidad para trabajar de forma independiente, capaz de resolver problemas y priorizar las asignaciones de trabajo. Debe poder trabajar horas extras, incluidos fines de semana y das festivos. Habilidades y destrezas preferidas: Conocimientos informticos, incluidas las aplicaciones de MS Office. Atencin demostrada al detalle y a los procesos Excelentes habilidades organizativas Capacidad para trabajar de forma independiente, resolver problemas y priorizar las asignaciones de trabajo con el apoyo del lder del equipo y el supervisor Debe ser capaz y estar dispuesto a trabajar horas extras, incluidos los fines de semana y das festivos, cuando lo dicten las emergencias del cliente y las necesidades comerciales. Conocimiento de las actividades del entorno de servicio, incluyendo DCI, mecanizado, montaje, prueba y servicio de campo para equipos rotativos. Capacidad para priorizar y gestionar mltiples tareas en un entorno de trabajo acelerado y cambiante Experiencia previa trabajando en el entorno acelerado e impredecible en torno a los servicios de reparacin. Fuerte impulso para hacer que las cosas sucedan y una fuerte actitud de "lo puedo hacer" Flowserve es un fabricante lder mundial y proveedor de servicios posventa de sistemas integrales de control de flujo. nete a una empresa cuya gente est comprometida con la construccin de un futuro ms sostenible para hacer del mundo un lugar mejor para todos. Con 16,000+ empleados en 50+ pases, combinamos nuestro alcance global con presencia local. Nuestro equipo se desafa a s mismo para abordar cada situacin con ingenio y creatividad para ayudar a brindar a nuestros clientes los productos y servicios de control de flujo ms innovadores. Apoyamos a 10,000+ clientes en todo el mundo, creando productos para satisfacer las necesidades de nuestros clientes que suministran energa, agua dulce, productos farmacuticos y otros elementos esenciales a consumidores, empresas y gobiernos a nivel mundial. Lo invitamos a poner en marcha sus talentos y su carrera en Flowserve. Req ID : R-13316

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

*********************$5,000 SIGN ON BONUS********************** Clean HarborsClute, TXis looking for aLead Diesel Mechanicto join their safety conscious team!The Lead Diesel Mechanics are responsible for overseeing the day-to-day operations of the shop, which include supervising all maintenance work, assuring company fleet is within DOT compliance, as well as maintaining all service and parts records. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Competitive wagesOpportunity for increase after 90 days!!!Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching componentOpportunities for growth and development for all the stages of your careerAccess to company paid OEM certifications and trainings!Generous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and tooling Speak with a recruiter today to learn more!! Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Performs preventative maintenance, conducts inspections, troubleshoots, diagnoses failures & deficiencies & performs necessary corrections. This includes conducting offsite road repairs/service calls.Completes daily checklist as required for proper operation of the unit being operated.Assures unit has daily maintenance duties performed and communicates any problems or issues with the unit immediately upon discoveryCompletes and submits all associated paperwork as required for tracking PM schedules.Conducts Safety Checks & Annual Vehicle Inspections in accordance with provincial & federal laws.Assures that Equipment is properly parked in compliance with facility permit and DOT requirements.Ensures that work meets all applicable Health and Safety Standard Operating Procedures.Responsible for maintaining a clean work environment.Performs other assignments as assigned by management.Understands Clean Compliance Standard. What does it take to work for Clean Harbors 5-7 years of diesel engine experienceAbility to work in team environment.Must be versed in all aspects e.g. electrical, computer, ECMs, fuel, air systems, ABS, hydraulic systems, engines etc.Demonstrates complete proficiency in diagnostic, repair, and maintenance of the following units: heavy duty forklift, roll off truck, forklifts, pick up trucks, box trucks, tractors, and tankers.Demonstrates complete proficiency in tooling and equipment diagnostic, repair, and maintenance.Ability to pass a background, drug, and physical test upon hire 40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. “2022 Top Company For Women To Work For in Transportation” *CH

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: The Superintendent role is responsible for coordinating some activities related to a construction project on-site, completing work ahead of schedule, within budget and specifications. The duties will vary by client and project size with varying degrees.Location & Travel Details: You can be based in any city or state in the U.S.. This is a traveling, project based position, up to 90% of the time. You have the potential to be placed on a project site located in any state throughout the US.You’ll spend 8-18 months on average per project. We offer designated per diem in addition to an excellent base salary to support and help you cover living expenses. This position is eligible for mobilization support (may include mileage reimbursement), and includes one longer weekend every four weeks for additional time at home.A company vehicle and fuel card OR vehicle allowance will be provided.At MasTec Industrial, we are committed to attracting, developing and retaining the best talent. No matter your role, you will have the opportunity to contribute to our success as we deliver innovative solutions to our clients.COMPANY OVERVIEW:MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables and infrastructure sectors. Our industrial expertise includes building products manufacturers, decarbonization, power generation facilities, manufacturing plants and mining. In infrastructure, we specialize in general heavy civil construction, underground utilities, structures, electrical work, material production, roadways, bridges, specialty pavement overlays, environmental projects and commercial buildings. Our renewables sector focuses on solar, wind and battery storage. Sustainability and safety are foundational to our culture and influence everything we do.MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments.Within the CE&I segment, the MasTec Industrial group includes sister companies Casey Industrial and Phoenix Industrial. This collective industrial group provides a merit shop, multi-craft industrial contractor with the ability to self-perform all major craft trades that ensures greater safety, quality, flexibility, and economy in delivering the work required to complete each project. The collective experience and knowledge of this team provides comprehensive project development, pre-construction planning, and project management with the mastery to successfully manage projects that meet deliverable and budgetary requirements. With every project, we commit to providing the highest levels of quality, safety, and value.At MasTec Industrial, we are committed to attracting, developing and retaining the best talent. No matter your role, you will have the opportunity to contribute to our success as we deliver innovative solutions to our clients. Responsibilities: ESSENTIAL JOB FUNCTIONS:• Promote and comply with all Company and safety policies and procedures• Must be able to perform all duties required of a foreman position• Coordinate and delegate site activities of foreman and field personnel to achieve deadlines and production goals• Coordinate activities of one or more sub-contractor• May work with client in order to keep the project on schedule and under budget• Ensure timely delivery of materials, confirm there is no damage to the materials and verify quantities• Responsible for receipt of all deliveries• Document all damage to materials on packing slips, or photograph if necessary• Document any change order request from client• Monitor paper flow ensure all documents are accounted for, filled out completely, legibly and filed or distributed to the appropriate parties• Plan ahead and order necessary materials or equipment to maintain crew productivity• Thorough working knowledge of specifications and how they impact the job quality and production• Investigate and resolve contract disputes by making recommendations to upper management for final action• Recommend best practice improvements for production, performance, quality and safety• Understand specifications, blueprints, addendums and change orders• Must be able to recognize any changes to work plan and track accordingly• Perform minor job layout with levels, transit and string line• Check quality of completed work• Monitor productivity reports and corresponding payroll records• Working with supervisor, handle customer complaints immediately• Ensure that proper safety equipment is available and being used properlyEstablish and maintain good working relationships with customers to encourage repeat and referral business• Facilitate technical and safety training and send employees to appropriate training schools as needed• Assist Human Resources by interviewing, making hiring and training recommendations, appraising work performance and addressing complaints of employees in the field• Manage, lead direct reports, and mentor.SUPERVISORY:• Supervise a minimum of one to two Foremen, Leadmen and crews consisting of up to 30 or more employees. Qualifications: EDUCATION AND WORK EXPERIENCE REQUIREMENTS:• Five years’ (5) experience/knowledge in a supervisory role in heavy industrial construction.KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED:• Be knowledgeable of MIC Health and Safety programs and project specific regulations.• When on-site, actively participate in daily toolbox meetings with crews and subcontractors.• Set a personal example of safe behavior.• Considerable knowledge of all construction tools, machinery methods and procedures• Must be able to forecast and monitor costs of project• Understanding of construction methods, scheduling and blueprint reading• Demonstrate leadership, lead by example, motivate workers and communicate with workers, subordinates, project managers and clients• Computer experience with Microsoft office, E-mail and Internet preferred• Ability to work well under pressure and within timelines• Read and interpret documents like safety rules, operating and maintenance instructions and procedure manuals• Write routine reports and correspondence• Speak effectively before groups of customers or employees of an organization• Calculate figures and amounts like discounts, interest, proportions, percentages, area circumference and volume• Apply concepts of basic algebra and geometry• Define problems, collect data, establish facts and draw valid conclusions• Interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables• Other may duties may be assigned• Maintain in-depth relations with all members of their team and your supervisor.PHYSICAL DEMANDS:• Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions.• May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks.• Stamina to perform this task repetitively and continuously for several hour intervals.• Uncontrolled environmental conditions: Constant change in weather and site conditions.• This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises.• Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.).• Move in and around confined, cluttered, and uneven areas.• May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights.• Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings.• Visualize objects in three dimensions from drawings.• Keep good balance and work at heights.• See well (either naturally or with correction).• Hear well (either naturally or with correction.)• Coordinate the use of eyes, hands, and feet.HOURS:This position is a Full-Time position scheduled to work typically 50 hours per week. Schedule is subject to projects requirements.TRAVEL:Travel required up to 90%.What's in it for you:Financial WellbeingCompetitive pay ($120,000 - $145,000) with ongoing performance review and merit increase401(k) with company match & Employee Stock Purchase Plan (ESPP)Flexible spending account (Healthcare & Dependent care)Health & WellnessMedical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and childrenDiabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet InsuranceFamily & LifestylePaid Time Off, Paid Holidays, Bereavement LeaveMilitary Leave, including Differential Pay and Benefits ContinuationEmployee Assistance ProgramPlanning for the UnexpectedShort and long-term disability, life insurance, and accidental death & dismembermentVoluntary life insurance, accident, critical illness, hospital indemnity coverageEmergency Travel Assistance ProgramGroup legal planPosition may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact . Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information.MasTec, Inc. is an Equal Employment Opportunity Employer/Disability/Veteran. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions.MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.#LI-MH1#LI-Onsite Appcast (For Export): #appred

Job Type:RegularPlains All American is an industry-leading transportation and midstream provider specializing in transportation, storage, processing and marketing solutions for crude oil and natural gas liquids (NGLs). We own an extensive network of pipeline transportation, terminalling, storage and gathering assets in key crude oil and NGL producing basins and transportation corridors and at major market hubs in the United States and Canada. On average, Plains handles more than 6 million barrels per day of crude oil and NGL in its Transportation segment. The company is headquartered in Houston, Texas.We are looking for highly-motivated individuals who enjoy working as part of a team in a dynamic and entrepreneurial work environment.Plains is currently seeking a Mechanical Engineer to join the Technical Services Team, providing technical subject matter expertise to operations and project organizations. This role ensures compliance using engineering standards and industry best practices. The individual in this role may mentor early-career Engineers and travel to field and vendor locations, including international locations, may be required. The Technical Services Engineer is a subject-matter expert on rotating equipment, including pumps and turbomachinery, with a diverse workload and can expect changes in work priorities and multiple projects with short turnaround times.The selected candidate will be eligible for company benefits including Medical/Dental/Vision, vacation time off, and free parking.Responsibilities:Partner with Project Engineering or Operations Engineering Teams to develop rotating equipment solutions.Complete RFQ packages, bid reviews, and award recommendations for major mechanical equipment (e.g., pumps, compressors, turbines, meter skids, provers, valves, fittings, pipe, etc.).Support Capital Expansion Projects, including drawing and document reviews and participation in Process Hazard Analysis.Provide support during the installation and commissioning of rotating equipment and perform site inspections as needed to ensure compliance with Plains and supplier requirements.Develop, review, and maintain assigned Company Operations and Maintenance Manuals and Procedures.Develop and maintain Company Construction and Equipment Standards and Specifications.Review and propose facility upgrades for reliability and/or efficiency.Perform vendor qualification reviews and recommendations.Visit suppliers for inspection and/or witness testing of equipment.Visit field locations for equipment reviews, including new construction and troubleshooting.Serve as company representative for industry standards and research organizations (API, ASME, PRCI).Provide broad mechanical engineering support, including but not limited to:Rotating equipment (pumps, turbomachinery, etc.).Measurement equipment (meter skids, LACTs, and provers).Materials (pipe, fittings, flanges) and valves.Welding (API 1104 and ASME Section IX).Preventive and predictive maintenance programs, including condition monitoring and vibration data review.Technical Training to various departments.Lead in troubleshooting mechanical equipment efforts.Provide day-to-day support on other various reactive work.Perform all other duties as assigned.Knowledge, Skills, and Experience Required:Degree in Engineering from an accredited university.5+ years of midstream and/or oil refinery operating experience with an emphasis on rotating equipment technical support, reliability, and/or system design.ISO Vibration Category II or higher certification.Expertise in rotating equipment, including but not limited to centrifugal and positive displacement pumps used in process and pipeline service, compressors, steam, and gas turbines.Knowledge of API 610, 618, 619, 674, 676, 682, and RP 682.Familiarity with ASME B31.3, ASME B31.4, and 49CFR195.Knowledge and experience in the inspection of rotating machinery fabrication and performance testing procedures and evaluation.Experience in root cause failure analysis for various equipment in processing facilities and pipeline transportation systems.Strong communication skills with a focus on teamwork and collaboration.Demonstrated proficiency in standard PC-based programs.Experience using 2D and 3D AutoCAD or similar CAD software.Experience in creating and maintaining internal specifications and operating procedures.Proactive and requires minimum supervision.Ability to handle a heavy workload, with unplanned overtime and changes in work priorities, multiple projects with short turnaround times are common.Ability to travel to field locations, with an estimated travel expectation of 25%.Consistently looks for efficiencies and opportunities to improve group work processes.An organized self-starter with the ability to work under pressure on multiple projects simultaneously.Valid driver’s license with a clean abstract.Cleared criminal history (background) and satisfactory reference checks.Compliance with the Company’s drug and alcohol policy including pre-employment D&A testing.#PlainsAt Plains, our employees are our most valuable asset. Hard work is rewarded with competitive compensation and a top-tier benefits program designed to keep our employees safe, healthy and happy. We work hard to deliver the best results to our stakeholders and we also respect our employees need for personal and family time, which is reflected in our benefits program.Salary details estimated by job boards such as Indeed, Glassdoor, and LinkedIn do not represent Plains’ compensation structure. We thank all candidates for their interest; however, only those selected for an interview will be contacted.By submitting your resume, you consent to the collection, use and necessary disclosure of the personal information provided during the application and selection process. Learn more.

$27.00/hourShift Premium may ApplyImmediately hiring! Are you a diligent and meticulous individual with expertise in automotive repair If you have experience working in an auto garage or car dealership, we want you to join the Avis Budget Group enterprise!What You’ll Do:You’ll perform standard and complex repairs, including warranty, on a wide variety of auto makes and models with no technical supervision, including the diagnosis and repair of engines, transmissions, exhaust, brakes, electrical, air conditioning and computer systems. You may also act as a technical expert to other technicians in the shop.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training in our vehicle makes and modelsPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s LicenseMinimum 3 years of auto repair experience, holding 3 ASE (ability to acquire 2 additional ASE certificates within first year)Knowledgeable in the following areas covered by the ASE certification programs, including but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning and Engine Performance, Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are:Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.The fine print: Avis Budget Group is an equal opportunity employer – M/F/Veterans/Disabled.This role requires the ability to lift up to 50 pounds, continuously stand, walk, sit and kneel frequently, and enter and exit vehicles. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of Avis Budget Group.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group.HoustonTexasUnited States of America

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking a Fleet Maintenance Manager who will be a dynamic, multi-task oriented senior professional to manage all day-to-day maintenance aspects of this fixed route bus operation. The Fleet Maintenance Manager willensurethat all contractual requirements are achieved, and duties included will consist of daily, weekly, monthly and annual reports. The Fleet Maintenance Manager must be able to properly manage a budget for maintenance program. Qualifications: Talent Requirements:Must have at least three (3) or more years of recent (within the last five (5) years) and relevant experience managing the maintenance functions of a transit bus maintenance shop similar in scope, size, and complexity and with same or similar type of transit vehicles/equipment.Must have experience managing/ directing 10 plus employees (fleet Technicians/Service Workers/Cleaners).Experience working with 50 + buses within the last year.Previous passenger transportation in current project or similar environment preferred.Must be able to manage and interface with client.Must have the ability to track and control parts inventories, vendors and suppliers.Must be able to properly prioritize, implement and manage work schedules, projects and assignments.Must be able to manage the financial/accounting aspects of a fleet maintenance operation.Must be able to communicate effectively with all levels of staff in written and oral formats.Must have computer skills including word processing, spreadsheets and Microsoft outlook.Must have technical competence with light/medium/heavy duty vehicle repair and preventive maintenance.Must display initiative, professionalism, candor and tactat all times.ASE or manufacture’s certifications a plus.Technical experience with fixed route transit bus maintenance.Solid knowledge of managing audits, PM schedules.Experience with Diesel, CNG, and Alternative fuels a plus.Must have a CDL class B with passenger and airbrake endorsement.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants.Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

Line of Business: OtherPay Range: $82,830.00 – $110,469.99About UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingDevelop and manage detailed maintenance schedules and work orders to ensure timely and efficient maintenance activities.Coordinate with maintenance technicians, engineering teams, and operations staff to schedule and prioritize tasks across multiple product lines.Implement preventive maintenance strategies to minimize equipment downtime and extend asset lifespan.Estimate time, resources, and costs for maintenance jobs, manage inventory, and work with vendors to procure necessary tools and parts.Ensure all maintenance activities comply with safety regulations and industry standards, while maintaining accurate records and running reports for management.What Are We Looking ForStrong analytical and problem-solving skills.Excellent communication and coordination abilities.Proficiency in maintenance planning software and tools, with a preference for previous experience using SAP.Ability to work independently and as part of a team.Commitment to safety and quality standards.Work EnvironmentFast-paced and dynamic work environment.Collaborative team culture.Opportunities for professional growth and development.What We OfferCompetitive base salary and participation in our annual incentive plan.401(k) retirement savings plan with an automatic company contribution as well as matching contributions.Highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug Benefits.Health Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA).AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance.Paid Bonding Leave, 15 days of Paid Vacation, 40 hours of Paid Sick Leave, and 10 Paid Holidays.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $30-$50 per hour.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 5+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Entity: Supply, Trading & ShippingJob Family Group: Operations GroupJob Description: About Archaeabp is committed to investing in lower carbon energy so we can meet our ambition to reach net zero by 2050. And while we’re still mostly in oil and gas today, bioenergy is one of our five transition growth engines and a key focus to help us support the global energy transition.Archaea Energy, a bp company, is a leader in landfill gas to energy and the largest renewable natural gas (RNG) producer in the US. With big ambitions, we specialize in the development, construction and operation of RNG, landfill-gas-to-electric and dairy digester facilities. The team operates around 50 sites in 32 states with a robust development pipeline.About the roleLocated in Houston, TX, Conifer Systems has been in business for over 15-years and is seeing unprecedented growth. We contribute our success to our long-term employees, and an environment that promotes teamwork, collaboration, and professional development.The Field Service Technician will be responsible for preforming, General I&E work and supporting the commissioning process of industrial combustion and environmental equipment, ensuring that all systems are installed, tested, and operational to client specifications.Key accountabilitiesInstallation Oversight:Perform the installation, testing, and assist the commissioning of industrial systems, including oxidizers, furnaces, flares, vapor recovery units, scrubbers, and associated controls.Ensure that all activities meet safety and operational standards, promoting a zero-accident work environment.Safety and Compliance:Adherence to safety protocols and ensure that all tasks are performed with safety as a top priority.Ensure compliance with company policies, procedures, and industry standards during department projects.Complete all necessary safety documentation and reviews, and support field teams in maintaining safety standards.Troubleshooting and Technical Support:Troubleshooting and repair of equipment during the commissioning phase, including combustion devices, burner systems, and control panels.Provide technical expertise in analyzing electrical schematics, control systems, and drawings to ensure accurate installation and setup.Work closely with team to resolve technical issues and optimize system performance.Work closely with our vendors to troubleshoot/install 3rd party equipment.Communication:Generate Service reports updating daily progression.Complete on-site checklist including. Loop checks, device test logs, preventive maintenance, and other record keeping documents.Ensure timely communication and updates with Line manager regarding project progress, material needs, and job status.Support aftermarket service operations, including troubleshooting and repair services for previously commissioned equipment.Essential experience• Minimum of 5 years of experience in field service, or similar roles, with a strong background in Burner Management Systems (BMS) and electrical instrumentation.• Proven experience in electrical troubleshooting/Debugging industrial control systems.• Strong troubleshooting skills in mechanical, electrical, and control systems.• Ability to read and interpret P&IDs, electrical schematics, and technical drawings.• Excellent communication skills both written and verbal.• Working Knowledge of PLC’s, HMI and SCADA/DCS• Ability to travel up to 75%, including international locations.Why join us Delivering a better and more balanced energy system requires many different approaches and solutions. All of us have a part to play. We aim to support our people to learn and grow in an inclusive environment in which everyone is respected and treated fairly. So, if you have the right skills, commitment and courage to help us invest in today’s energy system and build out tomorrow’s, apply today!How much do we pay $55,000-$79,000. *Note that the pay range listed for this position is a genuinely expected and reasonable estimate of the range of possible base compensation at the time of posting.This position offers paid vacation depending on your years of relevant industry experience and will range from 120 – 240 hours of vacation per year for full times employees (60 - 240 hours of vacation per year for part time employees). You will also be eligible for 9 paid holidays per year and 2 personal choice holidays.You may learn more about how we calculate paid vacation and view our generous vacation and holiday schedules at benefits@bp. Bp has a parental leave policy as well, which offers up to 8 weeks’ paid leave for the birth or adoption of a child. Learn more at benefits@bp.Join our industry-leading team and you’ll receive a reward and wellbeing package to enable your work to fit with your life. These include, but are not limited to:401K ProgramHealth, Vision, And Dental InsuranceLife InsuranceShort-Term DisabilityLong-Term DisabilityBut above all You’ll play a key part in helping bp deliver our ambition – to be a net zero company by 2050 or sooner and help the world get to net zero. Apply today!Travel RequirementUp to 75% travel should be expected with this roleRelocation Assistance:This role is not eligible for relocationRemote Type:This position is a hybrid of office/remote workingSkills:Control of Work, Cost-conscious decision-making, Maintenance general, Procedures and practices, Reliability general, Risk Management, Safety Leadership, Turnaround generalLegal Disclaimer:We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status.Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process,pleasecontact us.If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

ESSENTIAL DUTIES AND RESPONSIBILITIES• Manage the daily work and safety of associates engaged in fleet, building, grounds, sanitation, refrigeration systems, power industrial equipment and security maintenance through tracking software and preventative maintenance schedules. Manage, assign, and monitor facility projects for quality and timely completion. Fully understand and train associates on preferred work methods (PMWs).• Lead to create a culture of safety that ensures that every US Foods associate remains injury free, always. Interpret, train, and consistently enforce Company policies and procedures.• Perform management functions of staff selection, development, discipline, performance reviews and/or terminations. Maintain associate relations through regular meetings and by keeping open communication with associates through answering questions and explaining policies.• Develop business relationships to ensure communication and efficient operations with third party vendors including, but not limited to, utility representatives, refrigeration contractor, janitorial, pest services, and security. Maintain current certificate of insurance.• Manage purchasing, warranties, capital improvement requests, and the parts department inventory levels for all fleet and/or facility needs to ensure proper department functioning. Purchase fuel and shop equipment, file warranty claims and recovery warranty dollars, and develop the yearly budget.• Ensure all vehicles are in proper working condition by performing and/or overseeing maintenance on all company owned equipment. Provide the proper documentation and applicable certifications and ensure conformance with vehicle manufacture’s service recommendations.• Work with drivers to enable them to operate specialized equipment properly, and provide assistance as needed when troubles develop on the road. Find qualified service to repair downed vehicles and obtain competitive bids for repairs.• Comply with local, state and federal regulatory agencies (i.e. OSHA, EPA, USDA, DOT, Tax commision etc.). Conduct audits ensuring all required inspections and documentation (including, but not limited to, food safety documentation, EPSM, PSM, fire protection, etc.) are completed accurately and retained to ensure a minimum potential for loss.• Coordinate efforts with Safety department to aid in training, associate observations, up-dating preferred work methods, accident investigations, and routine safety inspections. Coordinate emergency response or crisis management activities, develop and maintain liaisons with local emergency management and other entities to support a safe environment.• Other duties as assigned by manager.SUPERVISION:• Direct: Maintenance and Sanitation Staff (Maintenance Technicians, Fleet Technicians, etc.).RELATIONSHIPS• Internal: Warehouse and Transportation leaders and coworkers; Internal customers across department (e.g., Sales); Technicians• External: Third-party contractors; CustomersWORK ENVIRONMENT• May spend a portion of time on the road in a truck exposed to noise and vibration levels which may be higher than those typically experienced in passenger cars. Will spend time in an office working on a computer. Time will also be spent inside and outside the distribution center in a variety of climates including normal warehouse conditions with temperatures that may reach -5 degrees.MINIMUM QUALIFICATIONSRelated Experience/Requirements• Minimum 5 years of maintenance management experience.Knowledge/Skills/Abilities• Working knowledge of ammonia and Freon systems.• Working knowledge of environmental regulations/legislation and governing bodies.• Working knowledge of all applicable building, life/safety, and fire protection standards and codes.• Good interpersonal skills to establish and maintain co-worker relationships.• Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.• Ability to write reports, business correspondence, and procedure manuals.• Ability to work a flexible schedule including nights and weekends.• Strong problem-solving and organization skills with a focus on meeting deadlines.• Excellent communication skills and strong leadership.• Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.• Ability to adapt to changing organizational and operational needs.• Proficiency in Microsoft office Suite (Excel, Outlook, Teams, etc.).Travel•10% travel required, typically for mandatory meetings and/or training.Education• High school diploma or GED required.Certifications/Training• Possession of valid state Driver’s license.• Demonstrated knowledge of DOT, Hazmat, and OSHA regulations.• Thermo King and Major certification.PREFERRED QUALIFICATIONSLicenses• Certificate, licenses, and registrations in refrigeration/HVAC preferred.• Level 1 Ammonia Operation Certification preferred.• Powered Industrial Equipment Certification preferred.• Certificate in fleet trade/mechanic preferred.• State Inspections License preferred.• Class A or B commercial driver license preferred.PHYSICAL QUALIFICATIONS•Must be able to perform the following physical activities for described length of time:OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVERJOB REQUIRES WORKER TO:FREQUENCY:STAND: OCCASIONALLYWALK: OCCASIONALLYDRIVE VEHICLE: OCCASIONALLYSIT: OCCASIONALLYLIFT1-10 lbs (Sedentary): OCCASIONALLY11-20 lbs (Light): OCCASIONALLY21-50 lbs (Medium): OCCASIONALLY51-100 lbs (Heavy): OCCASIONALLYOver 100 lbs (Very Heavy): NEVERCARRY1-10 lbs (Sedentary): OCCASIONALLY11-20 lbs (Light): OCCASIONALLY21-50 lbs (Medium): OCCASIONALLY51-100 lbs (Heavy): OCCASIONALLYOver 100 lbs (Very Heavy): NEVERPUSH/PULL 1: OCCASIONALLYCLIMB/BALANCE 2: OCCASIONALLYSTOOP/SQUAT: OCCASIONALLYKNEEL: OCCASIONALLYBEND: OCCASIONALLYREACH ABOVE SHOULDER: OCCASIONALLYTWIST: OCCASIONALLYGRASP OBJECTS 3: OCCASIONALLYMANIPULATE OBJECTS 4: OCCASIONALLYMANUAL DEXTERITY 5: OCCASIONALLY1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift)2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs)3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel)4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps)5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)

Overview: ** HIRING NOW **Seeking experienced Automotive Mechanics / Automotive TechniciansPay: $30.00 - $45.00 flag rateSun Auto Tire & Serviceoperates multiple locations across Texas and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The Master Technician / Automotive Mechanic ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Sun Auto Tire & Service standards.Benefits:Competitive Bi-Weekly PayTuition ReimbursementPaid Vacation and Sick Time6 Paid HolidaysMedical, Dental and Vision InsuranceLife Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Diagnoses vehicles according to the appropriate level of certifications/experience.Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy.Performs complex and heavy-duty repairs.Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers.Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file.Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager.Maintains appropriate ASE certifications and renewals of expiring certifications.Qualifications:Minimum of 5 years of automotive technician / mechanic experienceMust be able to demonstrate the ability to properly use computerized equipment for diagnostics.Possess valid/current driver’s licenseCurrent ASE’s preferredMust be at least 18 years oldAbility to work a minimum of five days, including SaturdaysWorking Conditions and Physical Demands:The Master Automotive Technician / Mechanic will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside.The Master Automotive Technician / Mechanic must be able to meet the following physical requirements:Stand five hours per day and able to walk to gain access to various areas of the buildingBend, stoop, kneel and crouch regularly up to 10 hours per day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequentlyLift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently.Hear and speakVision sufficient to detect color, depth, and re-focusReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Auto Body Technician Classic Collision was established in 1983 in Atlanta, Georgia with one single goal: To offer quality service to its customers with integrity and honesty. Be a part of a rapidly growing company whose mission is to put safety, quality, integrity, and heart into every vehicle we repair and customer we serve. Classic Collision offers competitive pay, benefits, and career advancement opportunities. Please come and join our team! Why Choose Classic Collision Paid WeeklyContinuous TrainingSupportive Team CultureCompany match 401KMedical/Dental/VisionPaid Time Off - 6 Paid HolidaysRewarding Work Responsibilities Complete disassembly of vehicle to assist Collision Estimatorsin assessing damage to prepare a 100% Repair PlanEnsure all needed repairs identified to eliminate supplements and minimize repair timePlan work procedure: follow work order for all operations listedRemove upholstery, accessories, electrical and hydraulic windows, and seat operating equipment to gain access to damaged area of vehicle if needed. Store parts on carts or cover to eliminate potential damageMend damaged body by hammering out or filling in dents and welding broken parts; ensure all gaps and fits are to industry standards; remove damaged panels and bolts or welds replacement parts in position and reassemble after parts are paintedOperate a variety of hand and power tools (e.g. welder, soldering equipment, cutting torch, blocks, hammers, wrenches, sander, spray guns, etc.)File, grind, and sand repaired surfaces before turning vehicle over to the Paint Dept.Repair or replace defective partsEnsure all needed repairs identified to eliminate supplements and minimize repair timeInspect and test drive repaired vehicles to check for compliance with safety and quality standardsPerform other related duties as assignedComply with all Classic Collision standard operating procedures, safety, rules, and guidelines Qualifications Must be at least 18 years of ageI-CAR / ASE certifications preferred2-3 years’ collision repair experience preferredValid Driver's License RequiredCustomer-focused attitude with the ability to work well in a team environmentAbility to read and comprehend written instructions and informationSuccessful completion of background check required Behaviors/Competencies: Integrity-Respect and accountability at every level and every interactionCustomerService-Provide the highest level of customer service while building customer satisfaction and retentionInnovation-Develops and displays innovative approaches and ideas to our businessTeamwork-Contributes to building a positive team spirit and supports everyone’s efforts to succeed Physical & Environmental While performing the duties of this job, the employee is regularly required to use hands, and is required to talk and hear. The employee is frequently required to stand, sit, and walk occasionally for long periods at a time. The employee may occasionally be required to reach with hands, arms and move objects up to 20 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and ability to adjust focus. In addition, abilities for assessing the accuracy, neatness and thoroughness of the work assigned is required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential function. Classic Collision is an Equal Opportunity Employer: As an equal opportunity employer, Classic Collision does not discriminate against any employee or candidate based on age, race, gender identity, gender expression, genetic information, national origin, physical or mental disability, protected veteran status, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by all applicable federal, state, and local laws. Reasonable Accommodations: Classic Collision is an equal opportunity employer that is committed to working with and providing reasonable accommodations to individual with disabilities. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or submit an online application, pleasee-mail or call . This email and phone number are listed exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. This job description is not a complete statement of all duties and responsibilities comprising the position. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Overview: CONSIDER A CAREER WITH LAND ROVER SANTA FEWE HAVE THE BEST PAY IN THE MARKET AND RELOCATION ASSISTANCE!Land Rover Santa FeWe are looking to add qualified Master Automotive Technicians to our team!$10,000.00 Sign-On Bonus for Master Technicians | $5,000.00 Sign-On Bonus for Level 2 & 3 Technicians!In addition to our competitive pay, we offer our associates the following benefits:Relocation reimbursement available!**Job training and career advancement opportunitiesHealth, Dental, Vision, Life and Disability Insurance401(k) with company matchEmployee stock purchase programEmployee vehicle purchase programPerformance / longevity bonusesPaid time-offResponsibilitiesEfficient and accurate work in accordance with dealerships and factory standardsComplete system diagnostics and full automotive troubleshooting and testingMaintain an organized shop areaRoad-test vehicles to ensure quality workComply with company safety policies and proceduresCommunicate directly with service advisors regarding the status of the service workContinuously learn new technical information and techniquesAdhere to our values: Integrity, Transparency, Professionalism and TeamworkQualificationsAutomotive Technician Experience Required5-7 Years of Master Automotive Technician experience3-4 Years of Level 2 & 3 Automotive Technician experienceAutomotive technical or trade school degreeNational Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance.High School Diploma or equivalentValid driver’s license in the state and good driving recordGroup 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment** Relocation Reimbursement must be approved prior to job acceptance Group 1 Automotive is an Equal Employment Opportunity EmployerIND1

Waste Connections is looking to hire a 2nd Shift Diesel Mechanic to join our team in Alvin, Texas!Why Join Us • CULTURE: It’s a Great place to work! We work in an environment where empowered, self-directed all-stars know what they do is important.• INTEGRITY: Our definition is “saying what you will do and then doing it!” We keep our promises to our customers and our employees.• RESPECT: We show respect for our customers and fellow employees. Respect for ourselves grows through all the hard work and great service we provide to the communities we are privileged to serve.Click to view A Day in the Life of a Waste Connections Mechanic (youtube.com) of our Mechanics.Responsibilities:Repairs include but are not limited to, routine maintenance and repairing engines chassis and body components, hydraulic cylinders, brake systems, suspension systems, cooling systems, wheels and tires.Inspects equipment and/or trucks for condition, operations, parts and fluid levels, differentials, final drives, pump drives, and hubs.Knowledge of Hydraulics repair is requiredUtilizes vehicle computer electronics systems to interpret failure modes to initiate or assign repairs.Conducts safety checks on vehicles and equipment.Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times.Reviews, completes or assigns repairs identified on Driver Vehicle Inspection Reports.Performs maintenance related work as required.Maintains a clean, safe work area in compliance with corporate and OSHA standards.Performs required safety protocols while working on vehicles.Ability to effectively communicate needed repairs or tasks.Extensive physical activity. Requires strenuous physical work; heavy lifting, pushing, or pulling required of objects over 50 pounds.Work environment may be indoors in a shop, or outdoors to repair trucks on the road. Usually well-lighted and ventilated. Sometimes necessary to work in awkward or tight positions and to handle greasy or dirty tools. These factors require following basic safety precautions.The ideal candidate will possess:Minimum of 2+ years’ experience, that is directly related to the duties and responsibilities specified above.Must provide own personal tools. Welding/fabrication experience is a huge plus!ASE Certifications Preferred, but not requiredWhat we offer to you:Yearly Safety Bonuses Yearly Boot allowances Competitive compensationPerformance-based career growth potentialMedical, dental, vision insurance plansIncome Protection Plans (Life Insurance, Short Term/Long Term Disability)401(k)Flexible Spending AccountEmployee Assistance Program (EAP)Emergency Travel AssistancePrepaid Legal PlanTo be considered for any of our current openings you must complete an application at www.wasteconnections.com . Application information and additional instructions can be found once you select your position of interest.We offer excellent benefits including: medical, dental, vision, flexible spending account, long term & short term disability, life insurance, 401K retirement and unlimited opportunities to "Connect with Your Future".Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status.

Overview: We’re looking for bold, entrepreneurial talent ready to help build something extraordinary and reshape the future of building products distribution.QXO is a publicly traded company founded by Brad Jacobs with the goal of building the market-leading company in the building products distribution industry. On April 30, 2025, QXO completed its first acquisition: Beacon Building Products, a leading distributor in the sector.We are building a customer-focused, tech-enabled, and innovation-driven business that will scale rapidly through accretive M&A, organic growth, and greenfield expansion. Our strategy is rooted in delivering exceptional customer experiences, improving operational efficiency, and leveraging data, digital tools, and AI to modernize a historically under-digitized industry. What you will earn:: Competitive Pay: We make sure that your hard work is recognized.401(k) Match: Take advantage of our employer-matching contributions to help grow your retirement savings.Medical, Dental, and Vision Benefits: Experience the peace of mind that comes with our comprehensive benefits package designed to prioritize your well-being.Employee Assistance Program (EAP): Receive support through personalized care, family services, therapy, legal and financial assistance, and wellness programs.Paid Leave: Our company holidays and paid time off and parental leave programs help employees to recharge, achieve work-life balance, and pursue personal interests.Paid Training and Advancement Opportunities: Open doors to exciting possibilities by engaging in our dynamic learning programs, which include the opportunity to earn valuable certifications.Legal Assistance: Access over 20,000 lawyers and comprehensive legal coverage for home, financial, consumer, auto, family, civil lawsuits, and estate planningsaving you time and legal fees.Protection for Your Finances & Identity: Stay secure with Norton LifeLock, offering identity alerts, credit monitoring, device security, dark web monitoring, parental controls, and more.Pet Insurance: Customize a plan that fits your budget, covering accidents, illnesses, and wellness, with Spot Pet Insurance.#BenA What you will do:: Sell waterproofing building products including high-demand sealants, concrete repair and fire protection products.Drive profitable growth and achieve sales and margin budgetsProspect and identify new opportunities and customersDevelop and maintain relationships with customer base and vendorsPartner with branch operations to deliver an outstanding customer experienceUse customer relationship tools like SalesforceContinue to develop sales skills and expand product knowledgeTravel extensively within assigned market What you will bring:: Join Our Talent Community Today!If you're passionate about sales, driven by success, and eager to make an impact in the building materials industry, we invite you to join QXO’s Talent Community. Stay informed about new opportunities as they arise!Take the first step toward a rewarding career with Beacon. We look forward to staying connected with you and exploring future opportunities together.More about QXO:The building products distribution market is a nearly $800 billion global opportunity, with a highly fragmented landscape and significant room for innovation. As QXO continues to grow, we see transformative potential in areas like B2B e-commerce, price optimization, demand forecasting, and digital customer connectivity.QXO is led by Brad Jacobs, who has founded and scaled five multibillion-dollar, publicly traded companies including XPO, GXO, RXO, United Rentals, and United Waste. With more than 500 acquisitions completed across his career, Brad brings a proven track record of building world-class teams and creating long-term shareholder value.QXO is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, disability, or any other characteristic protected by applicable law.

The pay range per hour is $28.15 - $33.61Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About the Job:Benefits eligible within two weeks of employmentTuition-Free ProgramsCurrently hiring for below shifts:Sunday - Wednesday from 6:00AM to 4:00AMAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 1 (MT1), you will maintain and repair automated material handling and facility equipment, and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target mechanics to solve problems, validate quality of work for outside specialty contractors, and meet aggressive time lines. You will collaborate with Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You will operate Target owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies as needed. This is an entry-level position in the technician role with promotion potential to Maintenance Technician 2, by completing and demonstrating proficiency in all related Maintenance Technician 2 job requirements, measured by both hands-on validation and by a written assessment. A successful candidate in this role will:Maintain and perform basic troubleshooting of electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, scales and printer applicatorsDemonstrate mechanical proficiency for hydraulic and pneumatic systems, and AC/DC electrical motors and drivesAdjust, reset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Maintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsPerform preventative maintenance on facility equipment (i.e. Powered Industrial Trucks, HVAC, air compressors and dryers, and balers)Perform basic electrical maintenance and simple repair/replace of various electrical circuits and related electronic equipment, using tools such as multi-meters and infrared thermometers Read and understand basic electrical and electronic schematics[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Utilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes or cartons up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licenseBasic PC competency and ability to use mobile apps on handheld devicesFamiliar with simple wiring diagrams, symbols and electrical measuring[F&B Only:] Comfortable working in a temperature-controlled environmentExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresCommonly used industrial toolsBasic Carpentry and PlumbingBasic blueprint and schematic readingBasic AC/DC electrical and electronic principlesBasic metal fabrication and weldingBasic Industrial ControlsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with Programmable Logic Control (PLC) programs and Human Machine Interfaces (HMIs)Ability to troubleshoot basic Input/Output functionsExperience with robotic operation/ maintenanceBenefits EligibilityPlease paste this url into your preferred browser to learn about benefits eligibility for this role: https://tgt.biz/BenefitsForYou_C | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: https://tgt.biz/BenefitsForYou_CAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Machinist will operate a manual lathe and manual mill to machine stainless steel parts and components of flow control valves. The machinist will verify the quality of finished work with precision measurement tools. The Machinist will also operate a VTL. This is a second Shift position: Monday-Friday,4:00pm - 1:00amwith possible overtime during the week or weekend. Responsibilities & Requirements: Inspect first articles and verify the quality of the finished work by using precision measurement tools and demonstrating an in-depth understanding of specifications and quality workmanship.Meet production goals relating to efficiency, schedules, and scrap/rework.Clean and maintain machines and tools and keep an organized workspace.Apply an understanding of the process flow of documents, materials, and parts through the manufacturing process.Work closely with other machinists to discuss and solve problems relating to repairs and equipment.Collaborate with machine shop lead to discuss work-in-progress Preferred Experience / Skills: Experience operating manual lathes and mills (5+ years); Vertical Turning LatheExpertise required in machining 300-series stainless steel and other materials such as Hastelloy C276, Monel 400, Inconel, iron nickel and high chrome alloys.Working knowledge of machine tooling and processing requiredSkill required in using and interpreting precision measuring instruments.Strong blueprint reading skills requiredPersonal commitment to quality workmanship, with an ability to assess and explain quality concern to othersAble to accurately and consistently follow detailed procedures in order.An eye for detail to check drawings, part numbers, and materials, and to correctly complete routers and other paperwork.Work collaboratively as part of a team, showing a professional attitude and a service-oriented mindset in a fast-paced, flexible environment.Demonstrated track record of reliable, on-time attendance, able to work overtime and weekends as required.Standing for long times required, repetitive arm motions, frequent lifting of 25 lbs with occasional lifting up to 50 pounds.Must be able to complete math problems quickly and accurately.High School diploma or equivalent. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-13316 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

$23.00/hourShift Premium may ApplyImmediately hiring! We’re looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You’ll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting.The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. HoustonTexasUnited States of America

HPC-Industrial, powered by Clean Harbors, in Baytown, TX, is looking for an IS Equipment Operator (CDL Required) to join their safety conscious team! This team member is responsible for the safe and successful execution of jobs across all service lines and various other responsibilities. The Equipment Operator serves as a representative of HPC-Industrial in creating a continuous working relationship with clients/customers. Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life. Why work for HPC-Industrial Health and Safety is our #1 priority and we live it 3-6-5!Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOwn part of the company with our Employee Stock Purchase PlanOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsKey Responsibilities: Act as safety representative responsible for safety policies and procedures of both the company and the customer, including hands-on information regarding operations, safety, equipment, emergency response and administrative functions;Hands-on operation, when required, of manual and automated hydroblasting equipment;Operation of special equipment, such as Ultra High Pressure pumps;Operate equipment by energizing the pumping equipment and/or any specialized hydroblasting and/or chemical cleaning equipment, vacuum trucks and cutting equipment being used on the job;May be required to examine surface cleaned to ensure conformance to company and customer specifications;Perform routine maintenance on company equipment being used on the job;Perform any and all duties associated with liquid vacs, air machines and jet rodders;Direct a crew of vacuum technicians;Transport equipment and personnel to and from customer locations;Completes pre and post trip inspections, driver’s logs and complies with all other vehicle policy and DOT requirements;Loading and unloading hoses;Unload vacuum truck at the dump site;Provide general maintenance in the field;Perform other related duties as assigned.Required Qualifications:Execute a 180-degree rotary motion of the cervical spine in order to allow complete movement of the head and neck;Must be able to hold and operate with both hands a double trigger hydroblast shotgun and other hydroblast equipment;Climb ladders and work from scaffolding and stationary platforms up to heights of 200 feet;Tolerate and function in confined spaces of a minimum of five (5) foot inside diameter;Hold the back thrust of 50lbs. on a straight 66” pipe for a minimum of one (1) hour;Must be physically capable of using both negative pressure and air supplied respirators;Duties include driving heavy equipment for long periods;Must be able to wear protective clothing and/or equipment. This includes, but is not limited to, nomex coveralls, a back belt, slickers, rubber boots, a fresh air breathing mask and escape pack, and a hard hat;Work under extreme climate conditions (excessive high heat index of 95+degree Fahrenheit, 98% humidity; and sub-zero weather conditions) relative to geographic location;Exposure to dust (chemical and environmental), fumes (chemical and fluids), exhaust and highly pressurized fluids. (A respirator will be provided when required.);Noise levels exceed 85 dBA (hearing protection is provided and required).What does it take to work for HPC-Industrial Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs;Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations;Valid driver’s license, CDL Class A or B and other requirements of company’s driving policy required when driving company vehicle or using personal vehicle on company business;Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers;Experience operating a vacuum truck. Smartphone required for Electronic Logging Device;Working knowledge of operating equipment used in wet and dry vacuums.About HPC-IndustrialHPC-Industrial, a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees.HPC-Industrial, Powered by Clean Harbors, is an equal opportunity employer.HPC-Industrial is a Military & Veteran friendly company.*HPC*LI-LP1