Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Direct hire for a Full Time, onsite Equipment Service Mechanic to maintain our Fleet of Electric Forklifts, Pallet Jacks, and Floor Scrubbers for Amigos Meat Distributors Houston Facility. About 90% of our Forklift / Pallet Jack Fleet is electric, and 10% propane powered. The ideal candidate will be able to Troubleshoot, diagnose, and repair Crown models. Includes propane, electric motors, small motors, transmissions, drive axles, differentials, hydraulic systems, brake systems, steering systems, electrical systems, and lifting systems.
Salary range of $800/wk to $1000/wk depends on demonstrated knowledge, skills, abilities and verifiable work experience.
This is an immediate need, direct hire position with Amigos Meats. Your résumé goes directly to the hiring manager. All qualified candidates will be contacted.
Job Responsibilities include but are not limited to: Troubleshoot, diagnose and repair all Fleet Equipment Perform all assigned planned equipment maintenance services Maintain a service log and equipment cabinet of inventory Process paperwork after completion of each job Perform regular routine equipment inspections to identify potential problems and safety concerns and document. Manage your time and work schedule
Schedule: 8-hour shifts M-F Day shifts Weekends (work every other Saturday 8a-12p)
Benefits: Full Medical Dental Vision 401K w/ co. match Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: Minimum 2 years experience as a Forklift repair technician, GSE Technician, or small engine repair technician. Good Mechanical and electrical aptitudes, knowledge of electrical and electronic systems, internal combustion engines, and hydraulic systems. Good written/verbal communication and customer care skills Valid driver's license, good driving record and ability to safely operate lift trucks. Technical degree, previous forklift repair experience, welding experience and knowledge of various types of testing equipment preferred. Salary offered commensurate with knowledge, skills, abilities and verifiable work experience.
Amigos is an Equal Opportunity Employer.

T.G Meat Center is seeking to hire multiple meat cutters. This job requires a person to work in a cold refrigerated warehouse space. These are full-time positions, and we are looking to hire meat cutters with at least 1-2 years experience. Candidates that have experience cutting meat with commercial electric bandsaw are preferred. Work hours are 7am to 4pm, with occasional Saturdays and Overtime. All applicants will be contacted.
Benefits: Full Medical Dental Vision 401K Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: MUST be 18 years or older Able to utilize knives, saws, grinders and other equipment to perform meat cutting and trimming. Demonstrate the ability to identify different meat cuts. Willing to work individually as well as in a team. Maintain a safe environment- Personal Safety and Food Safety. Positive Attitude—makes everyone’s day better, including yours! Willing to learn and follow our processes. Ability to communicate verbally Be able to lift up to 60lbs Be physically able to load & unload a dolly or pallett Manufacturing experience is helpful, but not necessary.
T.G Meat Center  is a second chance employer. EOE. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Encuentra la Carrera perfecta y disfruta un refrescante cambio en Pol-Tex, division de Poly-America, L.P. Nuestra localidad en el area de Baytown se esta expandiendo y provee una gran oportunidad para trabajar en una industria lider en estabilidad y crecimiento.
Los empleados de produccion en Pol-Tex son responsables por la operacion segura de montacargas de gas para el proposito de manejo de cargar y descargar producto. El puesto de trabajo puede implicar responsabilidades adicionales a medida que se necesiten y/o sean asignadas por el gerente.
Responsabilidades: Operadores de montacargas en Pol-Tex son responsables por la operacion segura de montacargas sentado de gas para el proposito de manejo carga y descarga de producto. Los operadores de montacargas en Pol-Tex regularmente usan escaners RF y sistemas de control de inventario para  sacar ordenes , mantener las lineas de produccion suministradas y re llenar los bastidores de almacenamiento. La posicion puede incluir responsabilidades y oportunidades adicionales segun sean necesarias y/o asignadas por el gerente.
Calificaciones: Seis meses a un ano de experiencia reciente operando montacargas La habilidad y el deseo de trabajar de una manera segura La disponibilidad de trabajar un turno de dia o de noche. 4 dias de trabajo/ 4 dias de descanso, dias rotativos segun sean assignados. Responsabilidades adicionales y oportunidades segun sean asignadas por el gerente.

Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.

If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Pol-Tex offers competitive compensation packages including: Medical Dental Paid vacations Paid holidays 401(K)
Qualifications: The ideal candidate will possess:  Some experience performing troubleshooting functions in a manufacturing environment. The desire to expand knowledge and grow with the company. The ability and desire to work safely. The ability to work a night shift or a day shift.  4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Responsibilities: Forklift Drivers at Pol-Tex are responsible for safe operation of sit-down propane forklifts for the purpose of handling, loading, and unloading product. Drivers at Pol-Tex regularly use RF scanners and inventory control systems to pull orders, keep production lines supplied, and re-stock inventory racks. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.
Pol-Tex offers competitive compensation packages including Medical/Dental, paid vacations, paid holidays and 401(K).
If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Qualifications: One year of recent experience operating forklifts. The ability and desire to work safely. The ability to work a night shift or a day shift. 4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Pol-Tex International, a division of Poly-America, L.P., is currently seeking an Industrial Mechanic to join our maintenance team. Pol-Tex International’s mission is to be the safest and most efficient choice in the polyethylene recovery, recycling, and compounding industries.  Our fleet, facility, and equipment combined with our experienced and dedicated professional staff make Pol-Tex International the premier gathering and recycling center for the Gulf Coast Region. Pol-Tex International offers competitive compensation packages including Medical/Dental, paid vacations and holidays, and 401(K). Responsibilities Industrial Mechanics at Pol-Tex International are responsible for the maintenance, installation, troubleshooting, and modification of new and existing industrial converting equipment. This role will document, recommend, and execute maintenance procedures. The Mechanic will be working in a manufacturing maintenance team. At times they will complete the mechanical testing of electro-mechanical equipment. Tasks include replacing, inspecting and dismantling defective parts, and implementing upgrades and part changeovers. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. A strong desire to be hands on with their work and to follow processes through. The aptitude and desire necessary to be a good student of Pol-Tex processes, equipment, and procedures. Problem solving skills including troubleshooting of mechanical equipment.

Provide motor vehicle maintenance for the school bus, general purpose, and utility vehicle fleet.
Job Duties: Diagnose and repair all types of mechanical and electrical problems on school buses and all types of motor vehicles. Be the primary technician assigned to perform preventative maintenance and repairs, both major and minor for 20 School Buses and 20 Support Vehicles. Secure and maintain all assigned tools, parts and equipment. Substitute for any transportation employee as assigned by the supervisor. Maintain accurate records of all work performed. Comply with all safety measures and maintenance procedures as outlined in the department handbook. Substitute as a school bus driver when necessary. Perform other duties as assigned. Operates pressure washers, air compressor, tire machines, wheel balancer, bead setter, air jacks, air tools, grease guns and wrecker.
Qualifications: Minimum Education/Certification High School Graduate or GED. ASE Certification preferred. Must have five years experience working on trucks or buses. Must show proficiency and initiative as an expert mechanic. Possess or be able to obtain valid Class B Texas Commercial Driver’s License with all appropriate endorsements to drive a school bus within 120 days. Possess or be able to obtain valid Class A Texas Commercial Driver’s License will all appropriate endorsements to drive the district wrecker within 180 days. Be able to obtain a Vehicle State Inspection License.
Special Knowledge/Skills: Ability to read and comprehend vehicle maintenance manuals. Ability to operate all types of vehicle maintenance equipment.
The above statements are intended to describe the general purpose and responsibilities assigned to this job and are not intended to represent an exhaustive list of all responsibilities, duties and skills required.

San Jacinto College Central Pasadena Campus hiring an experienced HVAC Journeyman to help maintain and repair our College facilities HVAC systems and equipment in order to provide a safe and comfortable environment for students, faculty and staff.
The HVAC Journeyman is expected to maintain and repair HVAC equipment in the district. Perform preventative maintenance on equipment to ensure optimum efficiency and extend equipment life. Also, perform HVAC installation, repair and maintenance as needed. Perform preventive maintenance work as required and in the priority directed. Support and adhere to the College Safety Program. Maintain quality standards as set by the District. Check and test control circuits; check and test pneumatic control systems; diagnose HVAC problems and remove, repair and replace faulty parts. Be available for emergency after-hour work or to complete on-going projects, and be willing to respond to calls any time during a 24-hour period.
Duties include but are not limited to: Complete assigned preventative maintenance and repair work orders Perform equipment inspections to determine condition or potential problems Update material inventory for HVAC Department Trouble shoot water circulating pumps, cooling towers, air handlers, walk in coolers, walk in freezers, fan coil units, exhaust fans, split systems and roof top units Assist supervisor with water treatment systems Respond to hot and cold calls, diagnose problems and make adjustments or repairs as necessary Investigate all water leak issues within the buildings to determine the source Assist Plumbing and Electrical Departments when the need arises Other duties as assigned Carry college cell phone and on call 24/7
Benefits: We offer competitive benefits at reasonable costs through the Employees Retirement System of Texas (ERS). Benefits include medical, dental, vision, life insurance, 401K and more Holidays off San Jacinto College (SJC) offers a variety of voluntary retirement programs [403(b) and 457(b)] for its employees.
Requirements: Knowledge in maintenance, troubleshooting and repair of HVAC equipment including large centrifugal chillers, boilers, pumps and air handling units.  Ability to review and close out work orders in a computerized work order system. Knowledge in chemical water treatment systems for HVAC applications. Ability to diagnose and repair pneumatic and DDC control systems. Ability to read and interpret mechanical plans. Ability to rebuild pumps, compressors and other HVAC equipment High school education or GED Must have completed a recognized apprentice program, or have at least 5 years of experience directly related to the craft with no less than 3 years at the apprentice level.  Must be able to read and interpret electro-mechanical plans, specifications, and operational criteria and possess quality understanding of installed HVAC systems. Must have a valid Texas Driver’s License with a good driving record. May be required to successfully complete job ability testing. Preferred candidate should have at least 5 years of experience in hot water and chilled water systems of 100+ tons capacity with 2 years of experience in/or with related trades such as plumbing and electrical. Must have CFC refrigerant reclaimant certification at level 1 and 2 with a universal certification within one (1) year. State class A A/C license
Note: Due to the number of applications we receive, we are unable to follow-up with every applicant individually. If your qualifications meet the requirements for the position, and you are selected for an interview, we will contact you.   The San Jacinto College District is committed to equal opportunity for all students, employees, and applicants without regard to race, creed, color, national origin, citizenship status, age, disability, pregnancy, religion, gender, sexual orientation, gender expression or identity, genetic information, marital status, or veteran status in accordance with applicable federal and state laws.

The Time is Now! Start Your Career with the Houston Fire Department.
Per Chapter 143.023 of the Texas Local Government Code: A person may not take an entrance examination for a beginning position in the fire department unless the person is at least 18 years of age but not 36 years of age or older. A person may not be certified as eligible for a beginning position in the fire department if the person is 36 years of age or older.
Minimum requirements:
Fifteen (15) accredited college credit hours OR Two (2) years of full-time active military service with an honorable discharge as stipulated on a DD214 Member 4  Certified Applicants: Must meet one of the above requirements and have active Fire and EMT Certifications
Applicant must meet the above requirements by the Civil Service Exam date. Participates in classroom lectures, seminars, and practical training sessions as directed by the Houston Fire Department. Receives and participates in various types of training in fire suppression and emergency medical services up to and including paramedic certification. Participates in drills, demonstrations, and instruction in hydraulics, pump operation, maintenance, fire suppression, rescue, and emergency medical services. ONLY “on-line” applications will be accepted. On-line applications will be accepted until all testing slots are filled. 
Exam Information: Dates: 11/01/24, 12/06/24, 02/07/25, 03/07/25, 04/04/25, 05/02/25, 06/06/25 Time: 7:30 AM and/or 12:30 PM Location: Val Jahnke Training Facility, 8030 Braniff St, Houston, TX 77061. Bring your driver’s license or other photo ID. Due to the high volume of applications received, you will be contacted directly via email, should you qualify to take the exam. You will receive an email with the date to report to the testing site for the exam.
Benefits: Medical Dental Vision Wellness Life insurance Long-term disability Retirement pension 457 deferred compensation plan Employee Assistance Program 10 days of vacation each year 11 city holidays, plus one floating holiday Flexible schedules Professional development opportunities Transportation/parking plan Section 125 pretax deductions Dependent Care Reimbursement Plan Healthcare Flexible Spending Account
Qualifications: Immunizations/shot records will be required prior to starting the training academy. The minimum passing score is 70 percent on the written examination before the extra five (5) points for qualified veterans are added. Per Chapter 143.025of the Tex. Loc. Gov’t Code, an additional five points shall be added to the examination grade of an applicant who served in the United States armed forces, received an honorable discharge, and made a passing grade on the examination. Applicants who are eligible for extra military points must scan and attach a copy of their DD214 (Member-4) to their electronic application or send a copy to hfdhiringprocess@houstontx.gov. The last day to submit a DD214 is the date of the Civil Service Exam. No DD214s will be accepted at the test site. Texas Commission of Fire Protection State Fire Fighters Certification and Texas Department of State Health Services (TDSHS) Emergency Medical Technician Certification(s) will be subject to verification by the Human Resources Department. Texas Department of State Health Services Emergency Medical Technicians Certification as a Paramedic will be subject to verification by the Human Resources Department. An applicant may not take the examination for an eligibility list more than once. The eligibility list created as a result of this examination will be effective for a period of not less than 6 months or more than 12 months as determined by the Civil Service Commission. Passing applicants will be referred to the Human Resources Department Classified Careers & Services Division to continue processing. Any falsification in the application process will result in disqualification. Applicants must pass and complete all phases of the hiring process (civil service exam, physical ability test, interview, polygraph, background, immunizations, drug screen, medical examination).  HFD reserves the right to discontinue consideration in the hiring process based on an applicant conduct or verification of certain disqualifying factors.  Must not have ever been convicted of a Felony. Any Misdemeanor charge or divert/deferred adjudication or similar program may require an active TDSHS EMT certification prior to job offer. Applicants’ eligibility for hiring will be determined in rank order from the eligibility list.

BlueTriton is a leading provider of spring and purified water products - the name behind your favorite bottled water brands. We are proud to offer an extensive portfolio of highly recognizable, responsibly sourced, and sustainably packaged spring water in addition to other quality products and services. Get ready to quench your thirst with exciting possibilities when you join BlueTriton for a fiercely good career doing work that matters.ReadyRefresh brings hydration that supports a healthy lifestyle, and convenience that preserves precious time and sustainability to help improve our world. Our ReadyRefresh branches and warehouses are where our iconic brands begin their journey to the customer.Job DescriptionKey Responsibilities: The Fleet Technician’s primary purpose will require the individual to perform preventative and corrective maintenance on fleet vehicles and equipment including gas and diesel engines, hydraulic systems, air brakes, forklifts, tankers, and trailers.Reporting Location: Houston, TXCompensation: $29.91 / hour + shift differential for applicable hours workedSchedule: Monday – FridayStart Time:3 pm, 11:30 pm, 2nd ShiftBenefits: Medical, prescription, dental, vision, life, and disability insurance, 401(k) with match, company discounts, paid vacation, and much more! Employees are eligible for benefit election on day 1 of employmentSkills Required:Troubleshoot and repair fleet vehicles and equipment to include planned preventive maintenance, warranty repair, and other scheduled services.Program and record all repair work in Trimble TMT electronic maintenance system and on company PM CardsElectronically bill out parts in Trimble TMT Fleet software or company proprietary systemsEnsure planned preventive maintenance, warranty repair, and other scheduled services are completed dailyAssist in education of the Route Sales Representatives’ pre and post-trip inspectionsAdhere to all department policies and procedures; track all required documentationMaintain work area ensuring organization and cleanlinessEnsure company safe work practices are always followedQualificationsRequirements/Qualifications:Minimum three years hands-on experience in commercial fleet repair (gas, diesel or propane accepted)High school diploma, GED, or equivalent work experienceAccredited vocational / trade school certification preferredAbility to handle physical requirements, including, but not limited to, repeated bending, stretching, twisting, and lifting up to 60 pounds in all work conditions (indoor and outdoor), with or without a reasonable accommodationA valid driver’s license and acceptable driving recordAbility to secure and maintain a CDL Class B with airbrake endorsement within specified periodAbility to secure and maintain T4 (airbrake) certification within specified periodMust possess mechanic hand-tools and toolbox for secure storageSelf-motivated and capable of working independently without direct supervisionProficient with Microsoft Office programs, Electronic Diagnostic Tools, and Electronic Maintenance Database applicationsStrong customer service and communication skillsBlueTriton Brands, Inc. (“BlueTriton”) is a water and beverage company in North America that produces and distributes a portfolio of brands of spring water, purified water, and other beverages, which include Poland Spring®, Deer Park®, Ozarka®, Ice Mountain®, Zephyrhills®, Arrowhead®, Origin, Saratoga®, AC+ION®, Pure Life®, B’EAU®, and Splash Refresher. BlueTriton also owns and operates ReadyRefresh®, a water and beverage delivery service for homes and offices. Headquartered in Stamford, Connecticut, BlueTriton is a privately held company with operations and distribution primarily in the United States and Canada, employing more than 7,000 employees. BlueTriton manages water resources for long-term sustainability and helps protect more than 20,000 acres of watershed area owned by the company from harm and destruction. The company sources from 56 springs and has 30 production facilities across North America, with some verified to the Alliance for Water Stewardship Standard. BlueTriton is a Water Champion with The Water Council and has committed to be verified under their WAVE program.BlueTriton Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. BlueTriton Brands is committed to providing reasonable accommodation for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please contact us at

Company: Gerber Collision & GlassWELCOME TO GERBER COLLISION & GLASSOur Team Members Drive Us! Gerber Collision & Glass is one of the largest collision repair companies in North America. With $2+ billion in sales, over 800 locations and growing, our 10,000+ team members across the United States and Canada are passionate about delivering our goal to WOW Every Customer and Be the Best!We invite you to join our team. Gerber offers a great place to launch and grow careers. As we continue to grow, we have endless opportunities for you to grow with us.Gerber Collision & Glass recognizes, values and welcomes all applicants with unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans.Job Description:Gerber Collision & Glass - Bissonnet St, Houston TXPay ranges starting from $90,000 to $140,000 + depending on experience and locationThe Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Benefits That Drive Your SuccessGerber offers the comprehensive benefits you expect from an industry leader, including:Up to 80 hours of Paid Time Off annually2 weeks of Paid Parental Leave for Full time Employees who work a minimum of 30 hours per week6 paid holidays annuallyMedical, Prescription Drug, Dental & Vision Insurance401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsuranceAdditional Voluntary Life InsuranceContinuing Education OpportunitiesFree Prescription or Non-Prescription Safety Glasses annuallyAnnual Voluntary Uniform StipendGerber Collision & Glass is proud to be an equal opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.About UsGerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit gerbercareers.com to learn more about our company.

$20.00 - $24.00/hourSalary is determined by the applicant’s experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data.Immediately hiring! We’re looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Become a member of our family-friendly Avis Budget Group enterprise.What You’ll Do:You will perform basic repairs on a wide variety of vehicle makes and models with minimal technical supervision, including some preventative maintenance (oil, lube and tire repairs) and depending on your technical expertise, warranty repairs. You may assist our experienced mechanics in complex repairs.Perks You’ll Get:Bi-weekly hourly wageOn-the-job training to expand your automotive abilities, help to obtain ASE CertificatesPaid time offMedical, Dental and Other InsuranceContribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget carsWhat We’re Looking For:High school diploma or equivalentValid Driver’s License and good driving recordMinimum 1 year auto repair experience, 1 ASE (ability to obtain 2 more ASEs in first year)Willingness to work in a mechanical shop with moderate or loud noise levelMust possess all tools required for auto repair and maintenanceBasic computer skills (typing, data entry)Flexibility to work all shiftsPrevious OEM experience a bonus!Who We Are Avis Budget Group is a leading provider of mobility options, with brands including Avis, Budget & Budget Truck and Zipcar. With more than 70 years of experience and 11,000 locations in 180 countries, we are shaping the future of our industry and want you to join us in our mission. Apply today to get connected to an exciting career, a supportive family of employees and a world of opportunities within our growing enterprise.The fine print:Avis Budget Group is an equal opportunity employer – M/F/Veterans/Disabled.This role requires the ability to lift up to 50 pounds, continuously stand, walk, sit and kneel frequently, and enter and exit vehicles. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of Avis Budget Group.HoustonTexasUnited States of America

AutoReqId: 20168BR Pay Class: Hourly Hourly Pay Rate: $25.00 - $27.00 DOE Department: Maintenance Line of Business: RMC (Ready-Mix Concrete) Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Maintenance Mechanic for our South Texas Concrete facility located in Houston, TX. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Inspect equipment for proper functional use and perform preventative maintenance duties per manufacture’s specifications.Upgrade areas with new equipment/technology.Maintain current written or data input spreadsheets on all equipment repairs.Inspect, diagnose, and perform repair and maintenance of all plant equipment, using a variety of hand tools, power tools, shop machines, hoists, etc.Install and replace bearings, speed reducers, shafts, pulleys, idlers, motors, couplings, etc.Make major repairs to crushers, changing jaw dies, bearings, bushings, crusher mantles, etc.Repair conveyor belts, feeders, and hydraulic systems.Proficiently work with outside contractors on special projects.Have a willingness to operate individually or within the constraints of a team environment. What We Are Looking For Minimum of 5 years of experience (or formal technical training) mechanical troubleshooting and repair2+ years of diversified welding experienceMust have knowledge of hydraulics and pneumaticsMust have knowledge of mechanical moving parts (chains, bearings and rollers)Must be proficient at both ARC and MIG weldingMust be able to read and fabricate from drawingsMust be flexible to work occasional evenings or weekends to meet production requirements as needed. No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

AutoReqId: 21010BR Pay Class: Hourly Hourly Pay Rate: 24.29/HR Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Plant Maintenance Mechanic for our Sealy Sand & Gravel plant located in Sealy, TX. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Repair and maintain, in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision measuring and testing instrumentsObserve mechanical devices in operation and listen to their sounds to locate causes of troubleLubricate machinery, change parts, or perform other routine machinery maintenanceReassemble machines after the completion of repair or maintenance workStart machines and observe mechanical operation to determine efficiency and to detect problemsInspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needsLubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified proceduresInstall, replace, or change machine parts and attachments, according to production specifications What We Are Looking For High School Diploma or equivalent requiredMaintenance experience (or formal technical training), troubleshooting and repairKnowledge of hydraulics and pneumaticsAvailable to work flexible hours, days as well as an excess of 40 hrs. per week as neededKnowledge of mechanical moving parts (chains, bearings and rollers)Ability to use a variety of hand tools, power tools, shop machines, hoists, etc.Ability to read and fabricate from drawingsPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipmentWeld and torch certification a plusMSHA Part 48 Training a plus No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled