Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Martin Foods is looking for an experienced Maintenance Supervisor to oversee the maintenance department at their Houston facility. This facility produces various meat products for a multitude of restaurants throughout the region. The ideal candidate is an experienced maintenance expert, who can create a highly functioning department with a well-organized parts department, a well-organized and documented PM System, a thorough analysis of our equipment and its capabilities and how to optimize throughput/output as well as capture the highest ROI with additional investment in equipment.
Strong mechanical ability and a working knowledge of electrical, mechanical and PLC systems are required.
Key Accountabilities: Maintain the highest levels of workplace safety and food safety at all times. Ensure all equipment is running safely and properly, that downtime is minimized Understand all equipment needs for the plants and provide the necessary maintenance support for the plant to achieve its goals. Control all department costs including labor and inventory/parts. Develop and manage a robust inventory/parts system/program. Develops a high performing Team and actively promotes the company Values. Develops and maintains KPIs that effectively monitor progress around all key. deliverables within the department.
Primary Job Duties: Supervise the maintenance of plant equipment and manage preventative maintenance on production equipment and document as required. Plan, layout and schedule work for functional areas of responsibility and delegate work on a project or individual basis to maintenance technicians. Hire, train, monitor, discipline, evaluate and develop employees. Assist subordinates with diagnosing and remedying difficult problems. Enforcing organizational policies and employee rules of conduct. Monitor and regulate the operation of departmental areas and investigate solutions to complex problems affecting functional areas of responsibility. As needed, source outside vendors; establish project scope. Develop and monitor formal control programs to track and regulate repair costs and spare parts inventories. Work with corporate and project management personnel to design, plan, schedule and complete capital improvement projects. Prepare and maintain department reporting and record-keeping systems. Maintain good housekeeping conditions and ensure employee conformance to safety and sanitation rules and regulations. Develop, implement and ensure adherence to SOP’s. Develop and maintain qualifications and training standards for all maintenance personnel. Interface with regulatory and third-party agencies including USDA, OSHA, EPA, DEQ, and Fire Department, etc. Develop and manage departmental budgets. Serves as backup to maintenance technicians as necessary. Other duties as assigned.
Benefits: Competitive Health & Welfare Benefits Company-Matched 401(k) Savings Plan Award Program Potential Paid Vacation Paid Holidays Product Discount
Qualifications: 3 – 5 years of related management experience (within a food processing environment is preferred). Associate’s Degree or equivalent is preferred Strong mechanical ability and a working knowledge of electrical, mechanical and PLC systems are required. Demonstrated ability to apply and conduct good root cause analysis techniques and resolve problems is essential. Computer proficiency in Word, Excel, Internet, e-mail and database systems is required. Working knowledge of maintenance tracking software programs is desired. Must have a strong floor presence and be able to interact effectively with people at all levels. Be capable and confident in communicating at all levels of the organization from the executive team to the shop floor team members. Ability to lift and move over 50 pounds with or without reasonable accommodation is required. Full range of body motion Ability to work in cold environments, wet environments and hot environments.

We are looking to hire experienced concrete finishers who can expertly pour, level, and smooth concrete on a variety of surfaces including roads, sidewalks, curbs, and floors. You may also be required to set forms, patch existing surfaces, cut expansion joints, and monitor the curing of the concrete to ensure a high-quality finish.
Setting forms that hold the concrete in place Cleaning and inspecting surfaces for pouring issues Directing the casting of the concrete with the truck driver Pouring, smoothing, and leveling concrete using a rake, trowel, float, and screed Monitoring the effects of the weather on the curing process Applying sealing and hardening components Safely operating power vibrator to ensure the concrete is compacted Molding and constructing expansion joints using joiners and edging tools Polishing surface using a power surfacing machine
Benefits: Health Dental 401K Life Insurance *Waiting period may apply
Qualifications: Must pass a physical and drug/alcohol test Minimum 2 years work experience as a concrete laborer or mason Ability to stand for long periods Ability to lift heavy materials and work long hours Ability to kneel for long periods Knowledge of hand-held and power tools including power vibrators, polishers, cutting saws, and edging tools Able to work shifts, at night and on public holidays as required
Forde Construction is an Equal Opportunity Employer

The Time is Now! Start Your Career with the Houston Fire Department.
Per Chapter 143.023 of the Texas Local Government Code: A person may not take an entrance examination for a beginning position in the fire department unless the person is at least 18 years of age but not 36 years of age or older. A person may not be certified as eligible for a beginning position in the fire department if the person is 36 years of age or older.
Minimum requirements:
Fifteen (15) accredited college credit hours OR Two (2) years of full-time active military service with an honorable discharge as stipulated on a DD214 Member 4  Certified Applicants: Must meet one of the above requirements and have active Fire and EMT Certifications
Applicant must meet the above requirements by the Civil Service Exam date. Participates in classroom lectures, seminars, and practical training sessions as directed by the Houston Fire Department. Receives and participates in various types of training in fire suppression and emergency medical services up to and including paramedic certification. Participates in drills, demonstrations, and instruction in hydraulics, pump operation, maintenance, fire suppression, rescue, and emergency medical services. ONLY “on-line” applications will be accepted. On-line applications will be accepted until all testing slots are filled. 
Exam Information: Dates: 5/3/24, 6/7/24, and 7/12/24 Time: 7:30 AM and/or 12:30 PM Location: Val Jahnke Training Facility, 8030 Braniff St, Houston, TX 77061. Bring your driver’s license or other photo ID. Due to the high volume of applications received, you will be contacted directly via email, should you qualify to take the exam. You will receive an email with the date to report to the testing site for the exam.
Benefits: $5,000 Incentive Pay for ALL new hires Medical Dental Vision Wellness Life insurance Long-term disability Retirement pension 457 deferred compensation plan Employee Assistance Program 10 days of vacation each year 11 city holidays, plus one floating holiday Flexible schedules Professional development opportunities Transportation/parking plan Section 125 pretax deductions Dependent Care Reimbursement Plan Healthcare Flexible Spending Account
Qualifications: Immunizations/shot records will be required prior to starting the training academy. The minimum passing score is 70 percent on the written examination before the extra five (5) points for qualified veterans are added. Per Chapter 143.025of the Tex. Loc. Gov’t Code, an additional five points shall be added to the examination grade of an applicant who served in the United States armed forces, received an honorable discharge, and made a passing grade on the examination. Applicants who are eligible for extra military points must scan and attach a copy of their DD214 (Member-4) to their electronic application or send a copy to hfdhiringprocess@houstontx.gov. The last day to submit a DD214 is the date of the Civil Service Exam. No DD214s will be accepted at the test site. Texas Commission of Fire Protection State Fire Fighters Certification and Texas Department of State Health Services (TDSHS) Emergency Medical Technician Certification(s) will be subject to verification by the Human Resources Department. Texas Department of State Health Services Emergency Medical Technicians Certification as a Paramedic will be subject to verification by the Human Resources Department. An applicant may not take the examination for an eligibility list more than once. The eligibility list created as a result of this examination will be effective for a period of not less than 6 months or more than 12 months as determined by the Civil Service Commission. Passing applicants will be referred to the Human Resources Department Classified Careers & Services Division to continue processing. Any falsification in the application process will result in disqualification. Applicants must pass and complete all phases of the hiring process (civil service exam, physical ability test, interview, polygraph, background, immunizations, drug screen, medical examination).  HFD reserves the right to discontinue consideration in the hiring process based on an applicant conduct or verification of certain disqualifying factors.  Must not have ever been convicted of a Felony. Any Misdemeanor charge or divert/deferred adjudication or similar program may require an active TDSHS EMT certification prior to job offer. Applicants’ eligibility for hiring will be determined in rank order from the eligibility list.

The Maintenance Foreman will assist the Superintendent of Maintenance with the daily maintenance, preventive maintenance, servicing and cleaning responsibilities of METRO buses at an assigned bus operating facility. Manages assigned bus maintenance staff.  Maintains budgets, special records, reports, and employee records. Performs duties in a safe, efficient manner and in compliance with all applicable rules and safety procedures.
Job Duties: Provides primary managerial direction and performs personnel administrative functions of direct report staff (e.g. training, supervising, work assignments, timesheets, performance evaluations, etc.) for the purpose of maintaining necessary staffing, enhancing productivity of staff and ensuring necessary department outcomes are achieved. Responsible for the daily planning, scheduling and supervision of the mechanical, servicing and cleaning responsibilities performed at the assigned facility. Oversees the Mechanical Foremen, Electronic Systems Specialist, Electronic Technicians and hourly employees in the areas of employee development, manpower scheduling and performance. Oversees the supervision and observes new maintenance employees in their daily responsibilities. Assures sufficient numbers of buses are available for peak service needs and for back-up. Manages and preserves revenue fleet assets. Determines repair priorities and makes recommendations for developing and implementing new methods and procedures to improve fleet safety, operations/production and minimize operating costs. Monitors the accuracy and preservation of repair records, compiles routine reports, and reviews history of the bus fleet to analyze maintenance effectiveness. Inspects fleet for conformance with federal, state OEM and METRO standards. Monitors daily expenditures for materials and supplies. Assists with the preparation and administration of the annual budget and cost-control measures. Emphasizes the importance of safety, bus maintenance, and service quality, mean distance between failures, driver/customer satisfaction and public comments.  Accountable for safe practices to keep employee and vehicle accidents to a minimum. Handles disciplinary actions and resolutions.  May participate and assist the Mechanical Foreman in grievances, hearings, or arbitrations. Handles pay issues, sick time, vacation, miscellaneous pay, and on-the-job injury reporting. Promotes safety awareness and follows safety procedures in an effort to reduce or eliminate accidents. Performs other duties as assigned.
Benefits: Medical Dental Vision Insurance Competitive Pay Retirement Plan and Savings Plan Paid Vacation, Sick Days and Holidays Advancement Opportunities Life Insurance
Requirements: High school diploma or equivalent. Additional college courses or supplemental vocational school preferred. Minimum seven (7) years progressive experience in a public transit (maintenance) environment; to include three (3) years supervisory/management experience.  Experience should include heavy diesel mechanic experience, diesel engine overhaul, preventive maintenance and vehicle repair. Good interpersonal skills and communications (written/verbal) skills.  Good decision making and organizational skills.  Basic working knowledge of labor agreements and related policies.  General knowledge of PC’s and related software.
Additional Information: The Metropolitan Transit Authority of Harris County, Texas has a zero tolerance drug and alcohol policy for all employees. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment.
Further, employees who perform safety-sensitive functions will submit to drug and/or alcohol testing in accordance to the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements.   We provide equal opportunity to all qualified individuals regardless of race, color, religion, age, sex, national origin, veteran status, genetic information or disability.

If you're newly hired into certain bus mechanic job functions and employed with METRO for at least three months, you can begin to earn an incentive of up to $8,000.
Responsibilities and Specific Duties: Have a thorough knowledge of components on METRO’s revenue vehicles and their proper function as required for selected job classification. Show a proficient knowledge and use of test equipment and specialized tools related to selected classification requirements. Independently diagnose and repair all defects to completion in a timely manner under the supervision of a Mechanical Foreman. Perform duties in a safe, efficient manner and in compliance with all applicable rules and safety procedures. The specific job classification level will be determined on qualifications and experience.  Performs Preventive Maintenance Inspections (PMI) on revenue fleet. Inspects and/or test and observe defective equipment to troubleshoot and diagnose malfunctions of major components and complete assemblies. Performs diagnosis and repair of air brake systems, suspension, steering and alignment. Proper use and interpretation of laptop computer and related software. Must be able to read and interpret refrigerant, hydraulic, and pneumatic pressure gauges and understand the proper use of battery/ charging system analyzers. Services and diagnose electrical systems utilizing test instruments such as laptop computer, ID Reader/ Writer and able to read ladder logic charts. Assists in the servicing and diagnosing of exhaust after-treatment systems and electronic engine controls. Inspects and verifies dimensions, clearances, and torque of part fasteners to ensure conformance to factory specifications. Road tests vehicles when necessary to diagnose malfunctions or to ensure that they are working properly. Completes all required reports and records in a timely and accurate fashion. Assists in work direction with mechanics as assigned. Participates in on-going training in accordance with METRO’s Maintenance Training Program. Provides excellent customer service to METRO internal and external customers. Promotes safety awareness and follows safety procedures in an effort to reduce or eliminate accidents. Performs other job-related duties as assigned.
Benefits: Medical, Dental and Vision Insurance Competitive Pay Retirement Plan and Savings Plan Paid Vacation, Sick Days and Holidays Advancement Opportunities Life Insurance
Qualifications: High school diploma or equivalent.  Graduation from a related technical school preferred. Minimum three (3) years mechanical repair experience on automotive, medium or heavy duty equipment. Automotive Service Excellence Certificates (ASE) in brakes, steering/ suspension, and/or PMI preferred. A valid Commercial Texas Driver’s License with “P” endorsement is required and must meet METRO’s requirements regarding motor vehicle records. Must obtain Texas Commercial Driver’s License within 90 days of employment. The ability to drive any Authority owned vehicle. Able to maintain or obtain additional certification/licenses as required. Possess complete knowledge of all tools and equipment in shop related to job classification. Must maintain a basic set of personal hand tools to perform repairs related to job classification with exception of specialized tools provided by METRO. Ability to complete written reports, records and forms. Must be able to speak, read and write English.
The Metropolitan Transit Authority of Harris County, Texas has a zero tolerance drug and alcohol policy for all employees. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment.   Further, employees who perform safety-sensitive functions will submit to drug and/or alcohol testing in accordance to the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements.   We provide equal opportunity to all qualified individuals regardless of race, color, religion, age, sex, national origin, veteran status, genetic information or disability.

Seasonal Production Processors needed for our shore-based plants located in Dutch Harbor, Alaska For Westward Seafoods and The Northern Victor.
Work will begin the 1st week of June.
WSI processes several species of seafood including Pollock, Crab, Pacific Cod, Halibut and Sablefish. Production employees process raw product that is delivered from fishing vessels to sell to customers. Processors can be assigned to various positions within the production department including, but not limited to, butchering, sorting, filleting, and case-up. Processors are also required to participate in plant clean-up, and other duties as assigned.
This position requires the candidate have the ability to perform the physical requirements including; standing in place for long periods of time; repetitive motions using hands, arms, legs, and back; regularly lift and move 50 lbs; frequent rotations and twisting at the waist; frequent climbing and descending of stairs; working long hours in cold/wet environments (12+ hours per day, 7 days a week); and prompt and regular attendance. Overtime is available.
WSI has a zero tolerance policy for drugs and alcohol. You will be charged $20 per day for room and board. (This Could Change before the start of the season) Will be deducted from your paycheck. All WSI employees are required to wear protective safety gear where required and are responsible for promoting and maintaining a safe working environment for self and others. Shifts will vary depending on fish, and processors must be prepared to work 7 days a week for up to 18 hours per day. There may also be periods of time when there are few or no hours of work.
Benefits: Transportation to/from Point of Hire 401(k) Medical upon eligibility $20/day for room and board (this includes 3 meals a day from our company cafeteria) Onsite Laundry Facilities
Applicants Must: Complete the full online application! Apply with our quick apply then you will be redirected to Westward Seafood's careers site to register and complete the online application to schedule an interview time. Please proceed through the process until you receive the on-screen prompt you have completed the application. Incomplete applications will not be taken into consideration toward hire. WSI will make an effort to notify you (via email) if your application is received, incomplete and/or further action is required.
Requirements: Must be at least 18 years of age Must pass a post-offer drug screen and physical Must be able to stand and work for long hours in an often wet and cold environment. Must be able to repeatedly lift up to 50 pounds. Must have a basic understanding of English, including the ability to follow written or oral instructions. Must be able to climb stairs, and stand and walk on uneven and slippery surfaces. Must be willing to work any shift, including nights. Processing employees must be able to walk quickly to designated areas in the event of an emergency, and must be able to follow emergency instructions. All WSI employees must be willing to work and live in a multicultural environment.
Westward Seafoods is an equal-opportunity employer. We consider applicants for all positions without regard to race, religion, creed, national origin, age, disability, marital or veteran status, or any other basis prohibited by applicable law.

The Maintenance Mechanic performs building and mechanical maintenance to ensure proper operations of all equipment located within the facility and associated properties. The Maintenance Mechanic is responsible for maintaining the master keying system for the facility.
Benefits: Medical Prescription Vision Dental Flexible spending accounts Life insurance Disability insurance Several voluntary benefits Matched 403(b) plan
Qualifications: 3 years related experience. High School diploma or equivalent Ability to read and interpret blueprints, diagrams and written specifications. Ability to mount, connect, and adjust components, i.e. transformers, motor electrodes, relays, solenoids, etc. Must display initiative and good judgment. Computer literacy preferred. Texas Driver’s License Master Lock Smith certification preferred

Daily Instruments is seeking an entry-level Production Planner to join our rapidly growing design and production team. The production planner is responsible for the accuracy and timeliness of the production process. Duties include a specific focus on the materials and goods required in the production phase or sales orders, ensuring the work instructions and job routers are issued correctly for optimal performance. The Production Planner will be responsible for coordinating onsite work with the engineering teams, designers, purchasing/requisitions, and special project team personnel, as well as working alongside production management staff. The successful Production Planner will ensure that projects are completed safely and accurately, and in a timely manner to meet customer and shipping goals.
Manage the after-sales order or project work-flow plan process to ensure accurate and timely completion of production goals Coordinate with engineering and design teams to ensure all resulting work orders are in compliance with requirements Strict compliance and enforcement of all ISO, QA, contractual, and client requirements Read and understand technical drawings, schematics Planning and prioritizing operations to ensure maximum performance and minimum delay Managing the development of the manufacturing instruction package (Drawing, routing, work instructions etc.) Produce accurate job/shop routings and ‘made-to-order job instructions’ that will directly impact the production processes Coordinate work with and directly communicate with multiple disciplines including engineering, manufacturing, purchasing, welders, and other production staff
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits Including: Dental, Vision, Supplemental Life Insurance, Disability, Accident plan)
Qualifications: High School diploma Familiarity with machine shop, working in a manufacturing/fabrication environment Production Planning or Scheduling experience Understanding of purchasing/requisition in a manufacturing environment preferred Excellent technical communication skills, verbal and written Understanding of: ASME codes and NDT processes, understanding of GD&T and/or welding symbols Self-driven initiative to respond to fluid work environment and rapidly changing priorities Proficient computer skills, including Microsoft Office Enthusiastic team player, Creative thinker, focus on bottom-line results while managing for Total Quality Assurance Compliance Must be legally authorized to work in the United States for any employer other than current employer Must be fluent in English with ability to communicate highly technical terms/ideas; any other language skills are beneficial] This is primarily a sedentary position, but does require the physical ability to work in a busy shop environment including sitting, standing, lifting/moving up to 20 pounds, infrequently.
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

FIELD SERVICE DIESEL TECHNICIAN Description We are looking for a talented Field Service Diesel Engine Technician to join our team specializing in engine repairs for our Distribution Business in Houston, TX. $5,000 Sign on Bonus!!! In this role, you will make an impact in the following ways: Complete repairs and rebuilds on engine products in the fieldDevelop productive customer relations and ensures prompt and efficient attention to customer needs.Apply documented procedures and policies to complete repairs and schedule maintenance, including preparing required parts and toolsAssist with completion required documentation, such as work completed documentation, time sheets, warranty claims and quality forms, via handwritten forms or business system input screensComplete training in line with skill and business requirementsEnsure adherence to all meaningful Health, Safety & Environmental policies, procedures and legislation and reports any issues / incidents to their supervisor To be successful in this role you will need the following: (Advanced) Technician Level III: Significant relevant technician experience; qualified to perform work on most or all of products in-scope for a technician at this location; frequently engaged in complex diagnosis and repair; requires minimal to no supervision; ability to effectively train and guide less experienced technicians of varying skillsets.Locally valid driving permit Compensation and Benefits $26 to $38 based on experience!! Base salary rate commensurate with experience. Additional benefits vary between locations and include options such as our Retirement Savings Plan, Cash Balance Pension Plan, Medical/Dental/Life Insurance, Health Savings Account, Domestic Partners Coverage and a full complement of personal and professional benefits. Cummins and E-verify At Cummins, we are an equal opportunity and affirmative action employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law. Cummins validates right to work using E-Verify. Cummins will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee’s Form I-9 to confirm work authorization. This position will require a Med-Card and we will also be required to complete a DMV driving report. CANDIDATE MUST BE 21 YEARS OLD. A current valid license is required for this roleThis role requires a 5 year motor vehicle report, free from major violationsThis role requires applicant to pass a Department of Transportation (DOT) physical3 years driving experienceThis role is subject to Department of Transportation (DOT) driving regulations including Hours of Service and Electronic Log Booking Device useFederal law requires a CDL holder to be 21 years of age or older, applicant must be 21 years of age. Job SERVICE Primary Location United States-Texas-Houston-US, TX, Houston, Cummins Southern Plains Job Type Shop Recruitment Job Type Technician Job Posting Mar 28, 2024, 2:18:45 PM Unposting Date Jul 29, 2024, 11:59:00 PM Organization Distribution Business Role Category Hybrid - Potential for Partial Remote Relocation Package Eligible Req ID: 240002M2

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary and bonusPaid vacation-15 days of vacation first year plus Sick-Time, flex holidays and holidaysComprehensive benefits package including 401K, medical, dental, and vision care - Available day oneExtensive product and on the job/cross training opportunities with outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyJCI Employee discount programs (The Loop by Perk Spot)What you will doUnder general direction is responsible for the sale ofJohnson Controls, building automation offerings to mechanical contractors, designers, and consulting engineers. Promote theJohnson Controlsvalue proposition to construction community by providing business and technical solutions. Builds and runs long term customerrelationships/partnershipswith assigned accounts. Responsible for customer satisfaction and loyalty while working in conjunction with operations partners. Positions renewable service agreements as a foundation of run account relationships.How you will do itSells, with minimal direction, the Johnson Controls offerings persuasively, persistently and confidently to all members of the construction community to include contractors, consultants and designers while reaching optimal profit levels. Focuses on all opportunities to allow the contractor to achieve business objectives. Runs multiple, ongoing opportunities. Builds partnering relationships with the owner construction community responsible for the decision-making process to drive the sale of Johnson Control offerings. Actively listens, probes and identifies concerns. Understands the customer's business cycle customer base. Demonstrates technical and business expertise and maintains a high level of credibility. Garners loyalty, trust, and commitment from the customer.Seeks out, targets and initiates contact with multiple prospective customers in alignment with JCI strategy. Develops and maintains a network of industry contacts. Understands and uses the sales process outcomes as well as demonstrates evidence of advancing the sell. Shares technical knowledge plus business expertise with the customer to match the solution to the customer’s operational need and favorably position Johnson Controls. Qualifies and assesses potential customers.Addresses customer's operational and environmental objectives, needs and requirements. Recommends solutions and links customer objectives to total value solution and competitive advantage. Differentiates Johnson Controls services and products from competitors by applying creativity, resourcefulness, and innovation in a valuable sales approach.Acts as the customer’s advocate in interactions with Johnson Controls to ensure the customer acquires the best value from Johnson Controls offerings. Sets appropriate customer expectations on Johnson Controls offerings. Participates in final project inspection. Ensures that the customer is trained and oriented to system operation and the value of services delivered.What we look forRequiredAt least 2-3 years optimally selling in the building automation system industry.Demonstrates a dedication to integrity and quality in business.Excellent initiative and interpersonal communications skills.Proven ability to influence the market at key levels.#LI-AR1#SALESHIRINGJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Overview: **Immediate Sr. Automotive Technician opportunities! **Sun Auto Tire & Service operates multiple locations across Texas and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The Sr. Automotive Technician ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Sun Auto Tire & Service standards. Pay: $30.00 - $45.00 flag rate Benefits: No Sundays or late nights Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy. Performs complex and heavy-duty repairs. Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers. Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Maintains appropriate ASE certifications and renewals of expiring certifications. Qualifications : Minimum of 5 years of automotive technician / mechanic experience Must be able to demonstrate the ability to properly use computerized equipment for diagnostics. Possess valid/current driver's license Current ASE's preferred Ability to work a minimum of five days, including Saturdays Working Conditions and Physical Demands: The Master Automotive Technician / Mechanic will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The Master Automotive Technician / Mechanic must be able to meet the following physical requirements: Stand five hours per day and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly up to 10 hours per day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently. Hear and speak Vision sufficient to detect color, depth, and re-focus Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #bayard

Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Driven by our Purpose, we are committed to building a more sustainable future to make the world better for everyone. With more than 16,000 employees in more than 50 countries, we combine our global reach with local presence. We support more than 10,000 customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. Join a company where the people challenge themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. You will be part of a team known for its industry-leading talent, unparalleled portfolio, and unmatched commitment to customer success. Flowserve’s culture promotes recognition and rewards creativity, hard work, and commitment. We invite you to put your talents and career in motion at Flowserve. Role Summary: Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. This will be a 2nd shift opportunity working Monday-Friday 4:00pm-1:00am. Overtime may be required. NEW HIRES ARE ELIGIBLE FOR UP TO A $2500 SIGN ON BONUS! APPLY TO FIND OUT MORE! Responsibilities : Operating CNC Mazak and CNC Haas Machines or Equipment – Operate basic equipment and machines and carry out routine tasks.Create your own programs and setting up your machines.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Such as micrometers, dial indicators, and depth gauges. Equipment/instruments Precision Equipment Utilization – Interpret and use precision measuring.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: HS Diploma / GED and 3-5 years relevant experienceExperience with Lathes, smooth Mazak or Mazatrol.Must be able to create your own programs and set up the machinesVerbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work.Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating manual lathes, milling machines, or CNC lathes/mills.HS Diploma / GED and 3-5 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-9271 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Company: Gerber Collision & GlassWELCOME TO GERBER COLLISION & GLASSOur Team Members Drive Us! Gerber Collision & Glass is one of the largest collision repair companies in North America. With $2+ billion in sales, over 800 locations and growing, our 10,000+ team members across the United States and Canada are passionate about delivering our goal to WOW Every Customer and Be the Best!We invite you to join our team. Gerber offers a great place to launch and grow careers. As we continue to grow, we have endless opportunities for you to grow with us.Gerber Collision & Glass recognizes, values and welcomes all applicants with unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans.Job Description:WELCOME TOGERBER COLLISION & GLASS - FM529 CYPRESS, TX*Pay range starting from $75,000 to $140,000 +depending on experience and location*$$ EMPLOYEE REFERRAL BONUS'S FOR GENERAL MGR’S, ESTIMATORS, & BODY TECHNICIANS (BRING YOUR PEERS w/YOU AND GET AN ADDED BONUS)$$*EXP REQUIRED-AUTO BODY TECH'S-(ONSITE/IN-PERSON)NOW IS YOUR TIME TO COME MAXIMIZE YOUR ABILITIES, GROWTH, AND $$$$$ by Joining the Nation’s Best Team w/Stability!*QUESTIONS, TEXT KANDY HR | Regional Recruiting Manager | LA/TX*The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.#ABTSOUTHBenefits That Drive Your SuccessGerber offers the comprehensive benefits you expect from an industry leader, including:Competitive Pay PlansMedical, Prescription Drug, Dental & Vision Insurance401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsurancePaid Vacation & HolidaysContinuing Education OpportunitiesGerber Collision & Glass is proud to be an equal opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.About UsGerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit gerbercareers.com to learn more about our company.

$23.00/hourShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise. What You'll Do: As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures. Perks You'll Get: Bi-weekly hourly wage (New York and Puerto Rico: weekly wage) On-the-job training to expand your automotive abilities and help to obtain ASE Certificates Paid time off Medical, dental and other insurance Flexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expenses Retirement benefits (401k) Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars * Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License and good driving record At least 2 years of auto repair experience or coursework with automotive certifications 1 ASE certification (ability to acquire 2 additional ASE certifications within first year) Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/Diesel Comfortable working in a mechanical shop with moderate or loud noise levels Must have a complete set of tools required for auto repair and maintenance Basic computer skills including typing, data entry Must be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehicles Must be 18 years of age and legally authorized to work in the United States Previous Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate. Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. HoustonTexasUnited States of America

Build an Aviation Career You're Proud OfYour work ties us all together, helping our teams function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks.Work with the latest technologies and techniques in the aviation industry to source materials, manage inventory, and coordinate logistics. You'll ensure we have what we need to service our customers.The Avionics Installer is responsible for performing routine maintenance and major inspections on aircraft and engines. Trouble-shooting, repair, and modification of aircraft components and engines are accomplished by this position. Maintenance experience with Falcon, Lear, Challenger, Embraer, Cessna and/or Hawker airframes is strongly preferred.Tests, installs, and/or repairs electrical/avionics equipment and systems, including systems and controls contained in the flight compartment. Routes wire throughout aircraft tying into both new and factory installed wire bundles, and may assist in functional check-out and troubleshooting of all wiring systems. Performs less difficult assignments without assistance or supervision. Care and precision must be exercised in order to ensure quality installations, on-time deliveries, and satisfied customers. Installs, aligns, and wires electrical and electronic components such as instruments, sensors, radio communications, antennas, J-boxes, lights, etc.Determines the best location and method for installing and removing electronic equipment and systems by applying general trade practices and adhering to prints originated by Electrical Engineering, Electronics Engineering, various mod centers (STC's), and many aircraft manufacturers' wiring diagrams.Fabricates wiring harnesses; solders connector plugs; strips and hand lugs wiring; identifies wiring and fabricates and installs surface control indicating systems; performs terminal splicing; wires junction boxes; routes wiring and conduit; and performs any other electrical bench or installation work as necessary to complete the electrical repair or modification of the aircraft.Performs continuity checks and may assist in the functional check-out of complete aircraft systems.Assists in performing more complex electrical work as required. May assist in troubleshooting, locating, and correcting wiring difficulties.Operates hand and power tools. May operate electrical test equipment. Must be familiar with color coding and symbols used in identifying hardware and components.Must have knowledge of power sources and bonding and grounding techniques.Adheres to shop standards, various manufacturers' standards and practices and has knowledge of various federal and military standards including FAA Advisory Circulars.Documents all work accomplished (a.k.a. sign-off) in a clear, concise and accurate manner.Works fair share of overtime and travels to customer locations or other Standard Aero facilities as required.Responsible for knowing, understanding, following, promoting and continuously improving company policies and procedures.Observes all safety, environmental and general housekeeping rules and policies.May perform other duties as required by the department.Basic Qualifications:High School Diploma or GED equivalent required.1-3 years related avionics installation experience in Honeywell, Rockwell Collins, and/or Go Go product lines.Eligibility Requirements:Must be authorized to work in the U.S. Must be able to work 2nd shift.Must be able to stand for extended periods of time (8+ hours), lift 50 pounds unassisted, walk, bend, stretch, and climb ladders to service aircraftMust have knowledge of both electrical and electronic theories and be able to understand and follow wiring diagrams.Must have proven experience using a variety of hand and/or power tools and electrical test equipment.Analytical skills required to perform complex mechanical troubleshooting.Strong communication skills required, both verbal and written.Must have a history of demonstrating high levels of initiative in completing all job assignments and clearly following directions.Must have the ability to manipulate equipment of all sizes, tools, computer keyboards, and telephones.Must be able to see to disassemble and visually inspect.Must be able to hear to detect the sources of problems.Must have excellent hand-to-eye coordination.Desired Characteristics:FCC license Aviation training preferred. This training may take the form of military training, aeronautical academy or technical school training and/or an Aviation Associates Degree.Corporate aircraft maintenance experienceBenefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Powell is an engineer to order manufacturer of switchgear. We are seeking an experienced a Senior Industrial Maintenance Technician to join our team. The Maintenance Technician will perform routine and preventative maintenance and repair manufacturing and fabrication equipment, including CNC Laser Cutting and CNC Turret Punch Press equipment, Robotic Welding equipment, Automated Material Handling equipment, and Automated Powder Coat Painting equipment. 1st Shift Schedule: Monday-Friday 6:00am-2:30pm plus OTEssential ResponsibilitiesReading assembly drawings, schematics, and equipment layouts.Maintaining, diagnosing, troubleshooting, and repairing electrical circuits. (occasional)Maintaining, diagnosing, troubleshooting, and replacing control devices.Maintaining, diagnosing, troubleshooting, and replacing hydraulic equipment, circuits and components.Maintaining, diagnosing, troubleshooting, and replacing pneumatic systems.Must be able to look up parts from equipment drawings, schematics and parts lists.Must be able to understand our Computerized Maintenance Management System (CMMS) and be able to conform to our work order procedures.Adhering to all plant safety and environmental guidelines, policies and procedures.Requires working with a wide variety of other job groups and involves working around traffic, heights, electricity, hydraulics, and heavy equipment including moving parts.Assisting crew members and working in a team environment.Minimum QualificationsRequired Experience is Proportionate with the selected job level:The Industrial Maintenance Tech level 1 High School Diploma or General Education Diploma; associate degree in electrical technology preferred.Minimum of 1-2 years of experience in an industrial maintenance roleThe Senior Industrial Maintenance Tech High School Diploma or General Education Diploma; associate degree in electrical technology preferred.Minimum of -3-4 years of experience in an industrial maintenance roleSkills, Abilities & Other RequirementsMust be able to efficiently and effectively use a computer, CMMS and related software related to record-keeping and machine troubleshooting/maintenance.Strong mathematical ability is essential.Must be self-driven and able to drive organizational change.Must work well in a team environment.Must be willing to learn and perform with minimal direction.Must have mechanical and electrical knowledge.Must have basic computer skills: Microsoft SuiteMust be fluent in English with good written and verbal communication skills.Must have manual dexterity.Ability of strong mechanical aptitude.Ability to read mechanical and electrical schematics.Ability to troubleshoot and repair low voltage (12 v DC) - high voltage (480 v AC 3 Phase) electrical systems.Ability to visually and mentally make priority decisions and independent judgment calls based on the situation at hand.Ability to work long hours and weekends.Ability to operate hand and power tools, industrial machines, digital cameras, phones, scanners, tools, and controls in a safe manner.Ability to work and concentrate in a noisy environment.Working & Environmental ConditionsSafety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities.Required to wear personal protective equipment (PPE) (i.e., safety shoes, hard hats, bump caps, safety glasses, hearing protection, safety harnesses as required) and respirators when required.Must be able to work from all types of ladders (step ladders, "A" frame ladders, etc.)Specific vision abilities required include close vision, distance vision, color perception, peripheral vision, depth perception, and ability to adjust focus, hand-eye coordination.Working at heights usually no higher than 20 feet in the air on an elevated structure using proper lift equipment and Fall Protection Equipment.Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs or step ladders.Bending the body at the waist, the legs at the knees, and extending arms and hands in any directionContinuous standing and walkingAble to use upper extremities frequently, work with both arms above shoulders and use both arms at full length frequently.Must be able to meet physical lifting demand up to 50lbs.Frequent use of hand tools and power toolsMore InformationThis job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties.*Posted position does not provide visa sponsorship or relocation.#LI-KC1About UsIn our 70+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated and assembled to customer specifications!Powered by Innovation - Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story, and let us help you write yours. Hard work pays off in all of our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted.We are an Affirmative Action and Equal Opportunity Employer/Vet/DisabilityIf you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Overview: OVERVIEWEnjoy top hourly pay plus a competitive bonus plan, a four-day workweek, and a great benefits package (medical, dental, & vision, PTO, and 401k).Our Mobile Automotive Technicians enjoy a fully equipped, company provided van with state-of-the-art tools, company iPhone with access to resources like Mitchell Pro-Demand, as well as a growing client base that comes from being part of one of U.S. News’ Best Companies to Work For.You can grow and advance your career through on-the-job training and paid training opportunities. In addition, AutoNation Mobile Service is part of AutoNation which allows our mobile technicians incredible growth opportunities throughout the United States. AutoNation Mobile Service is fast-growing and now is the right time to get in!Our Technicians are paid based on an industry-leading technician wage grid that provides a pay range from $23.00 to $37.00 an hour, based on a combination of experience and certifications.WE WILL DEPEND ON THIS PERSON TOPerform vehicle repairs within regular scope of work (excluding tasks such as steering rack, fuel tank, engine teardown)Diagnose and assess circumstance and situation, depending on scope of work, either perform repair or sublet repair to partner shopsDiagnose and repair vehicles to ensure customer needs are metProvide labor and time estimates for additional automotive repairsEncourage customers to schedule recommended work with fact-based selling and automotive expertiseBe part of a team that cares about customers and their carsWork as part of a team to solve technical problems quickly and effectivelyPerforms other duties as requested by managerMust be able to remain in a stationary position for 50% of the timeMust have the ability to lift up to 50 poundsYOU SHOULD HAVEMinimum of 3-6 years of recent professional automotive repair experienceMinimum four ASE or OEM certifications, DOT, 609 or equivalentKnowledge in working and using repair shop software (All Data, Mitchell 1, etc.)Valid driver's license (clean background)Pass a pre-employment drug screenA desire to provide an extraordinary customer experienceComfortable working in varying environmentsSpeaking and writing in English is required, Spanish is a plusHigh school diploma or the equivalentWORKING WITH USFlexible Schedule: 4 days on, 3 days off every week!Competitive Pay (DOE)Paid vacation timeMedical, dental, and vision insurance401(k) matching 50% up to first 5%Access to state-of-the-art tools and equipment (you do not bring your own)Company branded vehicle provided for use during work shiftsWork clothes (uniforms) providedCasual atmosphere and great people to work withDOT Prerequisites: Employment will be contingent upon the successful completion of all prerequisites required by the U.S. Department of Transportation (DOT) / Federal Motor Carrier Safety Administration (FMCSA) regulations, including a physical and medical certification. Company OverviewAutoNation, a provider of personalized transportation services, is driven by innovation and transformation. As one of America's most admired companies, AutoNation delivers a peerless Customer experience recognized by data-driven consumer insight leaders, Reputation and J.D. Power. Through its bold leadership and brand affinity, the AutoNation Brand is synonymous with "DRVPNK" and "What Drives You, Drives Us." AutoNation has a singular focus on personalized transportation services that are easy, transparent, and Customer-centric.BenefitsClick here to learn more about our Benefits.Join us as we pave the way to moving our company, our communities and our industry forward. Apply today at a location near you or wherever you dream the road will take you.AutoNation is an equal opportunity employer and a drug-free workplace.

Job Title: Machine Operator 1FLSA Status: Non-ExemptDepartment: OperationsReports to: Assistant Manager, Superintendent or Assistant SuperintendentNew Hire Training Incentive: $1000 at 90 days & $1500 at 6 months (dependent on job performance)GENERAL DESCRIPTION / PURPOSE: Machine Operator 1 (MO1) is responsible for operating, maintaining, and repairing company railway maintenance and inspection equipment. This position can operate Loram’s on track MOW equipment and/or on track vehicles with supervision in both operating and travel modes. In this role you may be assigned to various types of equipment platforms dependent on business needs and demands.ESSENTIAL JOB FUNCTIONS: Safety FocusedAbility to lead a comprehensive and appropriate job briefing during operations shifts, maintenance shifts, and while conducting maintenance tasks.Consistently follows safe work processes, procedures and rulesUnderstands on track safety and can explain specifics when askedAble to locate all emergency equipment and demonstrate correct operationMachine Operations and Technical Knowledge Conducts machine inspections to identify problems, defects, changes, and hazards and communicates conditions to the operator or supervisor and performs common repairs as instructed. Provides accurate feedback that allows machine leadership to make maintenance decisionsAccurately records and reports common parts used to supervisor, including floor stockPerforms maintenance and repairs according to set schedules and policiesAccurately describes gauge and HMI functions as they relate to machine operationDemonstrates the ability to document and complete daily field reporting, personal expense reporting, field lodging, and other administrative reporting as necessaryBEHAVIORAL COMPETENCIES: Safety AwarenessValues BasedLearning on the FlyAction OrientedListeningPersonal LearningREQUIRED QUALIFICATIONS:Experience: Internal: 3+ Months Experience working with Loram equipment or equivalent in a 24/7 environment; Some assignments require Excavator experience. Meet all relevant or applicable pre-qualifications as noted in the general description for this role and Loram’s career development matrix.External: 2+ Years Demonstrated technical skills such as mechanical, electrical, hydraulic and machine operations. 2+ Years Demonstrated ability to learn communicate verbally and in writing and learn best practicesLicenses/Certifications: Maintain Railroad Certifications, CPR/First Aid, valid Driver’s LicenseSlots – 1+ year experience Heavy equipment operator (Backhoe, Excavator, or alike). Heavy Maintenance/ Construction equipment maintenance. Basic administration computer skills. Working knowledge of data systems and remote equipment operations cellar or tethered. Aurora - Minimum of 1 year computer or technology background. 1 year of working knowledge working with MS Windows. Preferred radiation experience. Commercial Driver’s License or able to obtain a Class B. WORKING CONDITIONS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the role. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.100% travel, including international, using any method of transportation.Ability to apply high levels of cognitive, analytical, retention and reasoning.Excellent communication skills used within any social context.Can stand, sit, walk, reach, balance, stoop, kneel, hear, taste and smell.Can see up close, distances, colors and has use of peripheral vision and depth perception.Can tolerate variable and sometimes extreme physical conditions during visits or inspections of company equipment in a railroad environment.Loram is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law.Rev: Nov 2023

DescriptionThere’s never been a more exciting time to join United Airlines. We’re on a path towards becoming the best airline in the history of aviation. Our shared purpose – Connecting People, Uniting the World – is about more than getting people from one place to another. It also means that as a global company that operates in hundreds of locations around the world with millions of customers and tens of thousands of employees, we have a unique responsibility to uplift and provide opportunities in the places where we work, live and fly and we can only do that with a truly diverse and inclusive workforce. And we’re growing – in the years ahead, we’ll hire tens of thousands of people across every area of the airline. Our careers include a competitive benefits package aimed at keeping you happy, healthy and well-traveled. From employee-run "Business Resource Group" communities to world-class benefits like parental leave, 401k and privileges like space available travel, United is truly a one-of-a-kind place to work. Are you ready to travel the world Key Responsibilities: United’s Technical Operations team is one of the largest Maintenance, Repair, and Overhaul (MRO) organizations in the world. The digital solutions we deliver solve complex challenges to help our operation work more efficiently every day. This Principal Architect role will play a critical part in our Core MRO System Replacement program – an exciting multi-year effort to modernize and transform our most critical Tech Ops platforms. This Principal Architect will lead product technical evaluation, implementation approach, integration strategy, and future state architecture definition, working hand-in-hand with other senior leaders on this initiative. This role will require understanding and conceptualization of both current-state as well as future-state architecture. The ideal candidate is a strong technical leader who can establish a technical vision, effectively balance trade-offs, implement solutions, and coach and develop junior team members. This position will collaborate extensively with Tech Ops as well as Digital Technology teams. Act as overall technical lead and single point of contact for the overall MRO replacement programPartner with other Principal Architects and Developers within Tech Ops and across the enterprise on domain-specific topics, including data replication, messaging, integration technologies, DevOps, services, UI/mobile, and others.Coach junior team members, including supporting their technical and professional developmentProvide sound technical decision-making and guidance to deliver sustainable, high-quality products.Be a trusted leader with vision with business partners to create impactful products that delight your customers.Support product evaluation efforts by analyzing, evaluating, and leading proofs-of-concept to support overall program decision makingUnderstand current-state architecture across the Tech Ops ecosystemDefine the future-state architecture post-MRO implementationDefine migration strategies, including bridging solutions and temporary integrations to support phased product implementationDevelop, implement, and monitor effective long-range and tactical plans as needed in each phase of the project, including road-mapping, release planning, sprint planning and other plans as neededSupport estimation of project costs through all phases of the project including analysis, development, integration, testing, deploymentEngage with technical collaborators to ensure alignment with enterprise standards, architecture best practices, and key integrationsEngage with application teams to understand technical landscape, integrations, and dependencies. United values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the “desired” qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table! QualificationsWhat’s needed to succeed (Minimum Qualifications): Bachelor's degreeComputer Science, Mathematics, Information Systems or other related field7+ years of related work experience3+ years of experience as an architect working with off-the-shelf and internally developed applicationsStrong working knowledge of one or more of the following: .Net, Java, or other modern object oriented language(s)Strong working knowledge of Rest API development and microservices development patternsWorking knowledge with modern software development lifecycles and iterative development and deploymentWorking knowledge of application integration patterns in a highly-distributed architectureWorking knowledge of AWS or Azure platformsExperience defining and implementing complex application architecturesExperience with highly-scalable, real-time, or highly regulated applicationsExperience with performance tuning and optimization What will help you propel from the pack (Preferred Qualifications): Airline or MRO experience is a plusExperience in large application modernization projectsAWS experience preferred United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT

AutoReqId: 19990BR Pay Class: Hourly Hourly Pay Rate: $25.00 - $27.00 DOE Department: Maintenance Line of Business: RMC (Ready-Mix Concrete) Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Maintenance Mechanic for our South Texas Concrete facility located in Houston, TX. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Inspect equipment for proper functional use and perform preventative maintenance duties per manufacture’s specifications.Upgrade areas with new equipment/technology.Maintain current written or data input spreadsheets on all equipment repairs.Inspect, diagnose, and perform repair and maintenance of all plant equipment, using a variety of hand tools, power tools, shop machines, hoists, etc.Install and replace bearings, speed reducers, shafts, pulleys, idlers, motors, couplings, etc.Make major repairs to crushers, changing jaw dies, bearings, bushings, crusher mantles, etc.Repair conveyor belts, feeders, and hydraulic systems.Proficiently work with outside contractors on special projects.Have a willingness to operate individually or within the constraints of a team environment. What We Are Looking For Minimum of 5 years of experience (or formal technical training) mechanical troubleshooting and repair2+ years of diversified welding experienceMust have knowledge of hydraulics and pneumaticsMust have knowledge of mechanical moving parts (chains, bearings and rollers)Must be proficient at both ARC and MIG weldingMust be able to read and fabricate from drawingsMust be flexible to work occasional evenings or weekends to meet production requirements as needed. No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

About Hawx Hawx Pest Control is a technology-driven company that is revolutionizing the pest management industry. Hawx serves a crucial public health function by using state-of-the-art equipment and environmentally conscious products to protect the people and places our customers love. At Hawx we pride ourselves on our internal company culture. Our team members benefit from being part of a company that actively rewards employees for being team players while providing ample opportunity for personal and professional growth. We understand how important it is to recruit and reward people who are enthusiastic about developing their careers and opening new opportunities while delivering a best-in-class customer experience. Job Summary We are seeking to hire a talented Seasonal Service Professional who will inspect and perform pest control treatments for residential and commercial customers using high quality and environmentally responsible products.DETAILS $17 - $20 per hourFull-time positionWork travel required Responsibilities Perform efficient routes individually.Enter and exit structures, crawl spaces and climb on top of structures.Address and alleviate customer concerns and pest related issues by using integrated pest management strategiesMaintain and care for company equipment, vehicle and gas card and other job-related items.Complete all duties required by a pest/mosquito/termite service professional: customer consultation, inspection, eliminate/identify conducive conditions and proper treatments.Record work activities and complete all paperwork after finishing services.Exemplify safe performance of job duties and adherence to safety policies and procedures. Qualifications TRAITS Reliable: Establishes and upholds our company culture and values. Believes in the company mission and the Hawx culture of excellence. Shows up on time and gets the job done. Stays on top of tasks and manages time and responsibilities well. People Person: Keeps things positive and gets energy from people. Adaptable and flexible while working with different personality styles. Develops strong working relationships with frontline team members. Enjoys working cross-functionally with Sales teams and knows how to relate to and work with them. SKILLS Top Performance: Sets the bar for the team in service quality and route efficiency.Effective Communication: Works well with team members of any skill level to level up their performance and has the ability to onboard and train new hires.Technical Expertise: Has a solid understanding of the pest control field and the technical aspects of the job being performed by frontline employees. Field Leads must understand protocols, application techniques, products, equipment and other tools that are used on a day to day basis so they can train and coach to a high standard. EXPERIENCE & OTHER REQUIREMENTS Pest management experience, preferably in a residential market, with responsibilities related to coaching and developing frontline team members.Must have and maintain any required state licenses/certifications.Must be 21 years or older with a valid driver's license.Must pass required background check and drug screening.Hawx Services, LLC is an Equal Opportunity Employer committed to fostering an inclusive work environment with the most qualified employees. Both in our hiring process and in the experiences that our team members have as employees, Hawx is committed to diversity, equity, and inclusion. Accordingly, Hawx is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, sexual orientation, age, marital status, disability, gender identity, or veteran status.

Overview: With over 150 years of experience, and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. WHY JOIN US We understand that hiring great people is the foundation of everything we do. Our employee benefits packages include: Competitive pay Medical, Dental, Vision and Prescription coverage Paid vacation and holidays 401(K) match Life insurance, AD&D and long-term disability Tuition reimbursement Opportunities available nationwide Employee discounts on vehicles, hotels, theme parks, select cell phone bills and so much more Pet Insurance Legal Plan, and ID Theft Protection Responsibilities: The Service Manager works with the Branch Manager and is responsible for the profitable delivery of HVAC and refrigeration services for a specific branch or branches. Reports to the Director of Service . Manage revenue, margins, and PM adds by tech. Recruiting, hiring, and development of technical workforce . Forecasts manpower requirements. Technical support and training to our technicians . Delivery & Accountability of goals and metrics for assigned technician group . Ensures customer requirements are followed and calls are completed on a timely basis. Ensures customer rules are accurately adhered to and approves work orders. Reviews dashboards and financial reports and takes appropriate action . Manages and maintains fleet, parts, and materials inventory, and resolves discrepancies or problems in a timely manner. Resolves issues or problems that impact customer satisfaction. Develops and maintains long-term relationships with customers and subcontractors. Conduct weekly service and safety meetings for all technicians . Weekly quality assurance on work performed at customer facilities . Evaluate and perform annual reviews with Branch Managers . Perform inspections of customer assets, technicians, and fleet . Create, communicate, and send weekly activity schedules to the Branch Manager, Service Director , and VP. Qualifications: High school diploma, GED, or completion of trade program or technical school. A college degree is a plus. 10 + years of experience in refrigeration/HVAC service, commercial construction, or a related industry. Knowledge of commercial refrigeration and HVAC principles and practices, including service hour estimation, labor forecasting, and multiple disciplines involved in area of responsibility. Proficiency in understanding and managing P&L. Demonstrated business acumen . Proficiency in managing multiple assignments, setting and balancing competing priorities with strong organizational skills and ability to multitask . Ability to solve problems and apply good judgment. Excellent verbal/nonverbal and written communication and presentation skills. Strong customer service skills, including an ability to proactively address customer issues and concerns and the ability to forge strong working relationships with customers. Knowledge of job site safety, ability to oversee work activities to ensure safe work practices and safety rule compliance. Ability to understand and follow all company policies and procedures and all applicable State and Federal laws. Ability to use typical business tools including E-Mail, Word, Excel, Work Order/Dispatch Software, Enterprise Resource Planning (ERP) software, etc. Good driving record. Strong leadership skills, with demonstrated experience managing a diverse and multi-discipline workforce. Proficient in coaching, training, developing , and building a team. Proficient in managing time, delegating assignments , and following through to ensure good results. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Clean Harbors is seeking a Diesel Vehicle Mechanic for our hub in Deer Park, TX. As Vehicle Diesel Mechanic, You will be responsible for conducting routine maintenance and repair on our company fleet, which includes both heavy and light duty vehicles. Day to day consist of working on drive lines, transmissions, suspensions, clutches, air brakes, and any other maintenance needed. Must be proficient in DOT Inspection and Preventative Maintenance.Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Competitive wages (Hourly Pay; Time & 1/2 after 40hr)Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsOpportunities for growth and development for all the stages of your careerKey Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all timesPerform preventative maintenance tasks and inspections on company vehicles and equipmentAbility to troubleshoot, diagnose and repair equipment and vehiclesSafely operates gauges, forklifts, shunt truck, torches, grinders, and various hand and power toolsPerform other duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors businessWhat does it take to work for Clean Harbors At least one year experience preferred with light to heavy duty maintenance and repairHS Diploma or GED equivalentComputer experience is a plusAbility to work well in team environmentMust have own tools Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Clean Harbors is a Military & Veteran friendly company. *CH

OverviewResidential Sales ConsultantReports To: Sales Manager or General ManagerStatus: Full-time, Regular positionCategory: SalesLocation Name: Church­­­­­­­­­­­­Join the team of experts and realize your true potential!Why You Should Join the Service Experts Team:Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us, and become an EXPERT!Position Summary:The Residential Sales Consultant is an outside sales position responsible for developing and closing residential sales and services opportunities through customer education and presentations, using traditional lead-generation techniques as well as internal, lead pipelines.Key ResponsibilitiesPresent comfort options of residential HVAC and water heater products and services to new and established customers.Bolster the customer experience through a consultative sales approach focused on customer retention and satisfaction.Create relationships with prospective customer and referral as well initiating calls to generate sales.Work collaboratively with technical team members, onsite, to promote and ensure a 100% customer satisfaction experience.Remain up to date on the latest industry trends, service methods, systems and technology available within the market and the business.Desired Skills and QualificationsOur Residential Sales Consultant (RSC) are highly ambitious, results-oriented, and self-motivated individuals. Skilled in providing innovative, customer-related recommendations, developing effective proposals, handling negotiating and closing sales. To accomplish this, a successful RSC must possess:At least a High school degree or GED. A Bachelor’s degree or related professional sales certifications preferred.Prior sales experience, with a preference for experience with direct selling to consumersStrong selling and business-development skills.A demonstrated ability to effectively communication concepts to a variety of audiences.Demonstrated commitment to the delivery of high-quality, customer-focused service.Excellent interpersonal skills with a demonstrated ability to understand customer concerns and translate that into business solutions the business can offer. . .Valid driver’s license with acceptable driving record.Ability to consistently demonstrate a positive attendance record.Available to work flexible hours and on-call shifts as needed.Ability to meet physical demands - climb ladders and/or attic stairs, to maneuver in attics, basements, and crawl spaces to access HVAC units, in order to assess customer requirements and take measurements.Service Experts Company Perks and Benefits for YOUTop Pay forTop Performers, including incentive and bonus opportunitiesOur Average Sales Professionals earn an average of $90,000-$120,000 annuallyTOP performers WILL earn moreGenerous PTO provided19 paid days off within your first year of employment (vacation, personal holidays, & national holidays)24 paid days off after your 2nd year of employmentNo layoffs during “Slow Season”– due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ampleadvancementandcareer-growth opportunitiesavailable across the U.S.Hold on to more of your paycheck with Company-sponsoredMedical, Dental,andVision Insurance programsWe providewellness program options forfree employee medical insuranceCompany-provided smartphone,tablet,uniform plan, andtool replacement programWe’ll make you better at what you do with our internalTraining AcademyBest-in-class401(k) Retirement SavingsPlan withattractivecompany matchingcontributionsCompany-paid employee LifeInsurance withoptions for YOU and your Family!Short-term andLong-term disabilityinsurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Service Experts Heating & Air Conditioningis an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.The job description is not intended to be a complete list of all responsibilities, duties or skills required for the job and is subject to review and change at any time, with or without notice, in accordance with the needs of Service Experts.Service Experts is committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request an accommodation, please email

Mauser Packaging Solutions is a global leader in solutions and services across the packaging lifecycle, providing packaging worldwide to companies in industries from food, personal care, paints and chemicals. Basic Function: The production line mechanic will be responsible for all production maintenance, including product quality control, line maintenance, and repair of line machinery and equipment. This role involves applying mechanical expertise in determining work methods and procedures for producing quality product. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Rotating Shift: MondayTuesdayWednesdayThursdayFridaySaturdaySundayWeek 1NightNightOffOffDayDayOffWeek 2DayDayNightNightOffOffOffWeek 3OffOffDayDayNightNightOff To thrive in this role, you should have a valid 309A or 442A electrician certificate, an impeccable safety record, and you must be reliable and show initiative. You show up every day eager to dive in and address issues you see, without being told. You are responsible for keeping the line moving safely and you take a lot of pride in that. Responsibilities: Each day you’ll be bending, lifting, stooping, and the like to repair equipment. You will replace sensors, contacts, or other defective parts. You’ll work with PLC equipment, multiple small tools, and high-voltage equipment. You are responsible for keeping your equipment in safe, usable condition and your area safe and tidy at all timesFollow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to insure a safe work environmentPerform other related duties as assigned Requirements: High School Diploma or GED3-5 years’ experience in a maintenance of Can Assembly Presses within a manufacturing environment; or equivalent combination of training and experience2+ years of proven work experience as a Maintenance ElectricianCertified electrician preferredAble to demonstrate the ability to maintain, troubleshoot and repair electrical equipment and mechanical systems involving electrical, plumbing, pneumatic, and hydraulic repair or replacement, including blown fuses and tripped breakers.Knowledge of PLC Logic, and ability to read schematics and blueprints.Understand electrical panel and drive components.Understand gear trains, shafts/journals, pulleys, and bearingsMaintenance and repair of waxers, scroll shears and Cone Top presses.Ability to interpret documents such as procedure manuals, blue prints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned duties EEO Statement Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

The pay range per hour is $28.15 - $33.61Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About the JobPay Range: $28.15 -$33.61, based on applicable experience.Tuition ReimbursementHealth Benefits After 14 Days!Currently Hiring for Below Shift:L3- Wednesday-Saturday: 10:30pm-8:30am w/ $2.50 Shift DifferentialAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 1 (MT1), you will maintain and repair automated material handling and facility equipment, and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target mechanics to solve problems, validate quality of work for outside specialty contractors, and meet aggressive time lines. You will collaborate with Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You will operate Target owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies as needed. This is an entry-level position in the technician role with promotion potential to Maintenance Technician 2, by completing and demonstrating proficiency in all related Maintenance Technician 2 job requirements, measured by both hands-on validation and by a written assessment. A successful candidate in this role will:Maintain and perform basic troubleshooting of electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, scales and printer applicatorsDemonstrate mechanical proficiency for hydraulic and pneumatic systems, and AC/DC electrical motors and drivesAdjust, reset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Maintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsPerform preventative maintenance on facility equipment (i.e. Powered Industrial Trucks, HVAC, air compressors and dryers, and balers)Perform basic electrical maintenance and simple repair/replace of various electrical circuits and related electronic equipment, using tools such as multi-meters and infrared thermometers Read and understand basic electrical and electronic schematicsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes or cartons up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licenseBasic PC competency and ability to use mobile apps on handheld devicesFamiliar with simple wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresCommonly used industrial toolsBasic Carpentry and PlumbingBasic blueprint and schematic readingBasic AC/DC electrical and electronic principlesBasic metal fabrication and weldingBasic Industrial ControlsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with Programmable Logic Control (PLC) programs and Human Machine Interfaces (HMIs)Ability to troubleshoot basic Input/Output functionsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)Target will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Target store or Supply Chain Facility or reach out to Guest Services at 1-800-440-0680 for additional information.

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

FIELD SERVICE DIESEL TECHNICIAN Description We are looking for a talented Field Service Diesel Engine Technician to join our team specializing in engine repairs for our Distribution Business in Houston, TX. $5,000 Sign on Bonus!!! In this role, you will make an impact in the following ways: Complete repairs and rebuilds on engine products in the fieldDevelop productive customer relations and ensures prompt and efficient attention to customer needs.Apply documented procedures and policies to complete repairs and schedule maintenance, including preparing required parts and toolsAssist with completion required documentation, such as work completed documentation, time sheets, warranty claims and quality forms, via handwritten forms or business system input screensComplete training in line with skill and business requirementsEnsure adherence to all meaningful Health, Safety & Environmental policies, procedures and legislation and reports any issues / incidents to their supervisor To be successful in this role you will need the following: (Advanced) Technician Level III: Significant relevant technician experience; qualified to perform work on most or all of products in-scope for a technician at this location; frequently engaged in complex diagnosis and repair; requires minimal to no supervision; ability to effectively train and guide less experienced technicians of varying skillsets.Locally valid driving permit Compensation and Benefits $26 to $38 based on experience!! Base salary rate commensurate with experience. Additional benefits vary between locations and include options such as our Retirement Savings Plan, Cash Balance Pension Plan, Medical/Dental/Life Insurance, Health Savings Account, Domestic Partners Coverage and a full complement of personal and professional benefits. Cummins and E-verify At Cummins, we are an equal opportunity and affirmative action employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law. Cummins validates right to work using E-Verify. Cummins will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee’s Form I-9 to confirm work authorization. This position will require a Med-Card and we will also be required to complete a DMV driving report. CANDIDATE MUST BE 21 YEARS OLD. A current valid license is required for this roleThis role requires a 5 year motor vehicle report, free from major violationsThis role requires applicant to pass a Department of Transportation (DOT) physical3 years driving experienceThis role is subject to Department of Transportation (DOT) driving regulations including Hours of Service and Electronic Log Booking Device useFederal law requires a CDL holder to be 21 years of age or older, applicant must be 21 years of age. Job SERVICE Primary Location United States-Texas-Houston-US, TX, Houston, Cummins Southern Plains Job Type Shop Recruitment Job Type Technician Job Posting Mar 28, 2024, 2:18:45 PM Unposting Date Jul 29, 2024, 11:59:00 PM Organization Distribution Business Role Category Hybrid - Potential for Partial Remote Relocation Package Eligible Req ID: 240002M2

Overview: **Immediate Sr. Automotive Technician opportunities! **Sun Auto Tire & Service operates multiple locations across Texas and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The Sr. Automotive Technician ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Sun Auto Tire & Service standards. Pay: $30.00 - $45.00 flag rate Benefits: No Sundays or late nights Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy. Performs complex and heavy-duty repairs. Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers. Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Maintains appropriate ASE certifications and renewals of expiring certifications. Qualifications : Minimum of 5 years of automotive technician / mechanic experience Must be able to demonstrate the ability to properly use computerized equipment for diagnostics. Possess valid/current driver's license Current ASE's preferred Ability to work a minimum of five days, including Saturdays Working Conditions and Physical Demands: The Master Automotive Technician / Mechanic will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The Master Automotive Technician / Mechanic must be able to meet the following physical requirements: Stand five hours per day and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly up to 10 hours per day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently. Hear and speak Vision sufficient to detect color, depth, and re-focus Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Build your best future with theJohnson ControlsteamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of theJohnson Controlsfamily and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary and bonusPaidvacation/holidays/sicktime–15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care –Available day oneExtensive product and on the job/cross training opportunities with outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyJCI Employee discount programs (The Loop by Perk Spot)What you will doThe Site Supervisor is part of our Building Solutions, North America business at Johnson Controls. This position will work onsite for a local customer managing large construction projects.How you will do it• Schedule subcontractors, consultants, and vendors in critical path to ensure timely completion.• Program and assist with troubleshooting when necessary.• Perform quality control duties and responsibilities regarding the work being performed.• Communicate with project team regarding ASI’s, RFI’s, and Material Submittals.• Ensure that subcontractor is fully executing and complying with his contracted scope of work.• Interface with site customer personnel to ensure conformance to Drawing/Hardware/Software/Graphics site standards.• Coordinate commissioning and validation activities on-site with commissioning agents and site automation engineers.• Schedule commissioning and validation activities with the Validation Engineering Team.• Perform technical reviews of test documents, software, and graphics.• Identify subcontractor non-compliance with safety, health, and environmental quality standards.• Identify conflicts in construction progress and communicate them to project team for resolution.• Maintain daily log (written) of activities on the jobsite.• Ensure subcontractor has corrected all deficiencies identified by project team.• Walk all units on project daily to monitor activities and assist in future planning.• Preside over weekly subcontractor meetings designed to coordinate the work.• Issue notices of non-compliance to subcontractors in regards to quality of work or scheduling.• Ensure that the job site is always kept in a clean and organized manner.• Perform job progress and completion punch list identification and completion.What we look forRequiredBachelor's Degree in Project/Construction Management OR Equivalent Experience. PMP Design Build Institute of America (DBIA), LEED certification, preferred.5-7years of construction management experience.Understands project scope and customer expectations.Responsible for a medium to large project, manages the contractual commitments of contractors including cost, quality, and schedule and coordinates their field activities.Focuses on developing long term relationships with customers in revamping, debottlenecking and expanding resource capacity.High level knowledge of commercial/contractual complexity, deal structure/financial acumen, disciplines of supply chain, communication skills, C-level relationships.Demonstrates the ability to persuade, negotiate, and influence others.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

The Avionics Technician troubleshoots and repairs (or sends out for repair) avionics systems that are malfunctioning in customer aircraft, and installs avionics systems and components. Directly and openly communicates with customers regarding the status and time frame of repairs. The Avionics Technician uses sound judgment and technical aptitude to make decisions regarding installation, troubleshooting, and discrepancy resolution. The Avionics Technician is technically competent and is expected to be able to accomplish most of his/her duties with minimal supervision. As customers are on site at the facilities, professional appearance and communication skills are required in order to create a positive and lasting professional relationship. Maintenance experience with Falcon, Lear, Challenger, Embraer, Cessna and/or Hawker airframes is strongly preferred.Build an Aviation Career You're Proud OfBuild your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success.Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency.Responsibilities:Troubleshoots and repairs Flight Management Systems (FMS,) Satcom and Airborne Radio Telephone Systems, EGPWS/TAWS, communications, navigation, radar, TCAS/XPDR, DME, autopilot/flight director, audio, ADF, Cabin Management/In-flight Entertainment (IFE), and other sophisticated avionics/electronics systems.Installs avionics systems on customer aircraft.Provides emergency power supply battery service for customer aircraft in-house.Maintains continuous communication with customers regarding the status of avionics work on their aircraft. Documents all work accomplished (a.k.a. sign-off) in a clear, concise and accurate manner.Works fair share of overtime and travels to customer locations or other Standard Aero facilities as required.Tests, installs, and/or repairs electrical/avionics equipment and systems, including systems and controls contained in the flight compartment. Routes wire throughout aircraft tying into both new and factory installed wire bundles, and may assist in functional check-out and troubleshooting of all wiring systems. Installs, aligns, and wires electrical and electronic components such as instruments, sensors, radio communications, antennas, J-boxes, lights, etc.Determines the best location and method for installing and removing electronic equipment and systems by applying general trade practices and adhering to prints originated by Electrical Engineering, Electronics Engineering, various mod centers (STC's), and many aircraft manufacturers' wiring diagrams.Fabricates wiring harnesses; solders connector plugs; strips and hand lugs wiring; identifies wiring and fabricates and installs surface control indicating systems; performs terminal splicing; wires junction boxes; routes wiring and conduit; and performs any other electrical bench or installation work as necessary to complete the electrical repair or modification of the aircraft.Performs continuity checks and may assist in the functional check-out of complete aircraft systems.Assists in performing more complex electrical work as required. May assist in troubleshooting, locating, and correcting wiring difficulties.Operates hand and power tools. May operate electrical test equipment. Must be familiar with color coding and symbols used in identifying hardware and components.Must have knowledge of power sources and bonding and grounding techniques.Adheres to shop standards, various manufacturers' standards and practices and has knowledge of various federal and military standards including FAA Advisory Circulars.Requirements:High School Diploma or GED equivalent required.Minimum 1-3 yrs of related avionics experience.Eligibility Requirements:Must be authorized to work in the U.S.Must be able to stand for extended periods of time (8+ hours), lift 50 pounds unassisted, walk, bend, stretch, and climb ladders to service aircraftFormal avionics systems and electronics education/training.Works fair share of overtime and travels to customer locations or other Standard Aero facilities as requiredMust have knowledge of both electrical and electronic theories and be able to understand and follow wiring diagrams.Analytical skills required to perform complex mechanical troubleshooting.Must be able to see to disassemble and visually inspect.Must be able to hear to detect the sources of problems.Must have excellent hand-to-eye coordination.Must have good interpersonal and verbal skills in order to interface with customers and employees.Preferred:2-3 years Aviation training preferred. This training may take the form of military training, aeronautical academy or technical school training and/or an Aviation Associates Degree.A&P license preferred.FCC license preferred.Corporate aircraft maintenance experience preferred.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Powell is an engineer to order manufacturer of switchgear. We are seeking an experienced Industrial Maintenance Technician to join our team. The Maintenance Technician will perform routine and preventative maintenance and repair manufacturing and fabrication equipment, including CNC Laser Cutting and CNC Turret Punch Press equipment, Robotic Welding equipment, Automated Material Handling equipment, and Automated Powder Coat Painting equipment. 2nd Shift Schedule: Monday-Friday 2:00pm-10:30pm plus OTEssential ResponsibilitiesReading assembly drawings, schematics, and equipment layouts.Maintaining, diagnosing, troubleshooting, and repairing electrical circuits. (occasional)Maintaining, diagnosing, troubleshooting, and replacing control devices.Maintaining, diagnosing, troubleshooting, and replacing hydraulic equipment, circuits and components.Maintaining, diagnosing, troubleshooting, and replacing pneumatic systems.Must be able to look up parts from equipment drawings, schematics and parts lists.Must be able to understand our Computerized Maintenance Management System (CMMS) and be able to conform to our work order procedures.Adhering to all plant safety and environmental guidelines, policies and procedures.Requires working with a wide variety of other job groups and involves working around traffic, heights, electricity, hydraulics, and heavy equipment including moving parts.Assisting crew members and working in a team environment.Minimum QualificationsRequired Experience is Proportionate with the selected job level:The Industrial Maintenance Tech level 1 High School Diploma or General Education Diploma; associate degree in electrical technology preferred.Minimum of 1-2 years of experience in an industrial maintenance roleThe Senior Industrial Maintenance Tech High School Diploma or General Education Diploma; associate degree in electrical technology preferred.Minimum of -3-4 years of experience in an industrial maintenance roleSkills, Abilities & Other RequirementsMust be able to efficiently and effectively use a computer, CMMS and related software related to record-keeping and machine troubleshooting/maintenance.Strong mathematical ability is essential.Must be self-driven and able to drive organizational change.Must work well in a team environment.Must be willing to learn and perform with minimal direction.Must have mechanical and electrical knowledge.Must have basic computer skills: Microsoft SuiteMust be fluent in English with good written and verbal communication skills.Must have manual dexterity.Ability of strong mechanical aptitude.Ability to read mechanical and electrical schematics.Ability to troubleshoot and repair low voltage (12 v DC) - high voltage (480 v AC 3 Phase) electrical systems.Ability to visually and mentally make priority decisions and independent judgment calls based on the situation at hand.Ability to work long hours and weekends.Ability to operate hand and power tools, industrial machines, digital cameras, phones, scanners, tools, and controls in a safe manner.Ability to work and concentrate in a noisy environment.Working & Environmental ConditionsSafety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities.Required to wear personal protective equipment (PPE) (i.e., safety shoes, hard hats, bump caps, safety glasses, hearing protection, safety harnesses as required) and respirators when required.Must be able to work from all types of ladders (step ladders, "A" frame ladders, etc.)Specific vision abilities required include close vision, distance vision, color perception, peripheral vision, depth perception, and ability to adjust focus, hand-eye coordination.Working at heights usually no higher than 20 feet in the air on an elevated structure using proper lift equipment and Fall Protection Equipment.Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs or step ladders.Bending the body at the waist, the legs at the knees, and extending arms and hands in any directionContinuous standing and walkingAble to use upper extremities frequently, work with both arms above shoulders and use both arms at full length frequently.Must be able to meet physical lifting demand up to 50lbs.Frequent use of hand tools and power toolsMore InformationThis job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties.*Posted position does not provide visa sponsorship or relocation.#LI-KC1About UsIn our 70+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated and assembled to customer specifications!Powered by Innovation - Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story, and let us help you write yours. Hard work pays off in all of our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted.We are an Affirmative Action and Equal Opportunity Employer/Vet/DisabilityIf you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

About Hawx Hawx Pest Control is a technology-driven company that is revolutionizing the pest management industry. Hawx serves a crucial public health function by using state-of-the-art equipment and environmentally conscious products to protect the people and places our customers love. At Hawx we pride ourselves on our internal company culture. Our team members benefit from being part of a company that actively rewards employees for being team players while providing ample opportunity for personal and professional growth. We understand how important it is to recruit and reward people who are enthusiastic about developing their careers and opening new opportunities while delivering a best-in-class customer experience. Job Summary We are seeking to hire a talented Seasonal Service Professional who will inspect and perform pest control treatments for residential and commercial customers using high quality and environmentally responsible products.DETAILS $18 - $20 per hourFull-time positionWork travel required Responsibilities Perform efficient routes individually.Enter and exit structures, crawl spaces and climb on top of structures.Address and alleviate customer concerns and pest related issues by using integrated pest management strategiesMaintain and care for company equipment, vehicle and gas card and other job-related items.Complete all duties required by a pest/mosquito/termite service professional: customer consultation, inspection, eliminate/identify conducive conditions and proper treatments.Record work activities and complete all paperwork after finishing services.Exemplify safe performance of job duties and adherence to safety policies and procedures. Qualifications TRAITS Reliable: Establishes and upholds our company culture and values. Believes in the company mission and the Hawx culture of excellence. Shows up on time and gets the job done. Stays on top of tasks and manages time and responsibilities well. People Person: Keeps things positive and gets energy from people. Adaptable and flexible while working with different personality styles. Develops strong working relationships with frontline team members. Enjoys working cross-functionally with Sales teams and knows how to relate to and work with them. SKILLS Top Performance: Sets the bar for the team in service quality and route efficiency.Effective Communication: Works well with team members of any skill level to level up their performance and has the ability to onboard and train new hires.Technical Expertise: Has a solid understanding of the pest control field and the technical aspects of the job being performed by frontline employees. Field Leads must understand protocols, application techniques, products, equipment and other tools that are used on a day to day basis so they can train and coach to a high standard. EXPERIENCE & OTHER REQUIREMENTS Pest management experience, preferably in a residential market, with responsibilities related to coaching and developing frontline team members.Must have and maintain any required state licenses/certifications.Must be 21 years or older with a valid driver's license.Must pass required background check and drug screening.Hawx Services, LLC is an Equal Opportunity Employer committed to fostering an inclusive work environment with the most qualified employees. Both in our hiring process and in the experiences that our team members have as employees, Hawx is committed to diversity, equity, and inclusion. Accordingly, Hawx is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, sexual orientation, age, marital status, disability, gender identity, or veteran status.

Equipment Mechanic (not heavy) We are seeking an energetic Equipment Mechanic to join our La Porte, TX team, who can change direction at a moment’s notice to maintain all mobile equipment to include but not limited to repairs, diagnosis, and troubleshooting. Performs daily preventative maintenance as assigned by supervisor. Health and Safety is our #1 priority and we live it 3-6-5!Competitive pay and benefitsComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all timesDisassemble/Reassemble heavy and mobile equipment to troubleshoot, diagnose and repairFabricate metal pieces and replace gaskets as neededTroubleshoot, repair and test all equipment to ensure functionalityUtilize propylene cutting rigRepair equipment using MIG and/or stick weldingOther duties as assignedEnter data for repairs, diagnosis, preventative maintenance, inventory check out and timeComplete daily work and training on computersWhat does it take to work at Clean Harbors High School Diploma or equivalent3+ years’ experience with mobile equipment repairDiesel Certification requiredAir Conditioning Certification or equivalent requiredCaterpillar or Kubota certifications or education a plus!Hydraulics Systems repairMust understand schematics to troubleshoot 12&24v systemsAbility to use a cutting rig (propylene cutting torch)Valid Drivers’ LicenseComputer literateJoin our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/Clean Harborsis the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market. Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We are an equal opportunity in employer to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law.Clean Harbors is a Military & Veteran friendly company.*CH #LI-MM1

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will do: You will have the opportunity to participate in our Upsell and SOS programs where you can earn extra commission on your work.Receive service calls from Service Resource Center, including a brief description of equipment/system malfunctions.Contact customer representative and ascertain equipment/systems problems.Diagnose problems and perform service and repairs on electronic fire alarm systems and other related building system products at customer sites.Follow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc. to repair equipment.Service, troubleshoot and install many different manufacturers’ Fire & Life Safety systems including SimplexGrinnell.Read and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics, and operational product manuals.Exhibit excellent customer service skills by consistently communicating with the district staff and customers to ensure customer satisfaction.Complete Service Acknowledgements with proper coding through communication devices, such as smart phones and laptop computersObtain customer signature upon completed service call assignment.Participate in a scheduled On-call rotation.Help to train or mentor others on the service team.Perform other duties as assigned.What we look for:Required Valid Texas Fire Alarm License - FAL2+ years documented experience in low voltage electrical systems, including Fire/Life Safety systems, Access Control, Burglar alarm and intercom systems.Experience in reading and interpreting blueprints, submittals, and operational/product manuals.Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices.High School DiplomaAbility to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings.Ability to work flexible hours including weekends to meet customer requirements.Demonstrate a high level of customer service.Maintain truck inventory to ensure timely response to customer needs.Ability to adhere to, implement, and always follow safety guidelines and procedures.Strong organizational skills, positive attitude, and ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Retain any licenses that are required by National, State and Local codes.PreferredNICET Level II certificationJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

*** $10k SIGN ON BONUS ***Build an Aviation Career You're Proud OfAt StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in aviation. Together, we get the job done and done well. Our stability, resources, and respectful culture supports you in building a solid career with a great team you can count on day in and day out for the long term.Responsibilities:Removes and reinstalls engines from turbofan and turboprop powered aircraft.Responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution.Performs operational checks and engine runs to ensure air-worthiness prior to departure.Inspects aircraft in accordance with OEM Light or Heavy Maintenance ManualsEvaluates removed components for serviceability and documents discrepancies (squawks). Reinstalls and tests components after completed inspection.Troubleshoots and repairs all airframe systems as required (hydraulics, landing gear, etc.).May perform fuel tank sealing on aircraft.Documents all work accomplished (aka sign-off) in a clear, concise and accurate manner.Accomplishes Service Bulletins, Repair Letters, and Airworthiness Directives as required.Reads and interprets maintenance manual procedures, blueprints, technical manuals, and schematic diagrams when required.Responsible for knowing, understanding, following, promoting, and continuously improving company policies and procedures.Analyzes a variety of mechanical problems and determines the cause and best method of repair.Tests operation and repairs/adjusts, as required: engines, engine controls and accessories, propellers and controls, landing gear, hydraulic systems and servicing, and flight controls, and adjusts rigging as required.Checks and repairs fuel, oil, oxygen, heating, cooling and pressurization systems.Utilizes mechanics hand tools, precision measuring instruments, gauges and calibration test equipment.Observes all safety, environmental and general housekeeping rules and policies.May perform other duties as required by the department.Relocation Provided: YesRequirements:Must be authorized to work in the U.S.High School Diploma or GED.A valid FAA Airframe and Powerplant (A&P) License is required.Minimum 3 years of corporate aviation experience on Falcon Jet.Eligibility Requirements:Must have proven mechanical and technical aptitude.Must have proven experience using a variety of hand and/or power tools.Must be able to work with minimal supervision.Strong communication skills required, both verbal and written.Must be available to work overtime and weekends as needed.Must be able to work outside in extremes of temperature and inclement weather.Must have the ability to think clearly, speak intelligibly on the telephone and in person.Must have the ability to manipulate equipment of all sizes, tools, computer keyboards, and telephones.Must be able to work in confined spaces.Must have a history of demonstrating high levels of initiative in completing all job assignments and clearly following directions.Must be able to stand for extended periods of time (8+ hours), lift 50 pounds unassisted, walk, bend, stretch, and climb ladders to service aircraft.Must be able to stand on hard surfaces for long periods of time.Must be able to see to disassemble and visually inspect.Must be able to hear to detect the sources of problems.Must have excellent hand-to-eye coordination. Preferred CharacteristicsAviation training. This training may take the form of military training, aeronautical academy or technical school training and/or an Aviation Associates Degree.Factory authorized training on assigned aircraft or engines.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Powell is an engineer to order manufacturer of switchgear. We are seeking an experienced a Senior Industrial Maintenance Technician to join our team. The Maintenance Technician will perform routine and preventative maintenance and repair manufacturing and fabrication equipment, including CNC Laser Cutting and CNC Turret Punch Press equipment, Robotic Welding equipment, Automated Material Handling equipment, and Automated Powder Coat Painting equipment. 1st Shift Schedule: Monday-Friday 6:00am-2:30pm plus OTEssential ResponsibilitiesReading assembly drawings, schematics, and equipment layouts.Maintaining, diagnosing, troubleshooting, and repairing electrical circuits. (occasional)Maintaining, diagnosing, troubleshooting, and replacing control devices.Maintaining, diagnosing, troubleshooting, and replacing hydraulic equipment, circuits and components.Maintaining, diagnosing, troubleshooting, and replacing pneumatic systems.Must be able to look up parts from equipment drawings, schematics and parts lists.Must be able to understand our Computerized Maintenance Management System (CMMS) and be able to conform to our work order procedures.Adhering to all plant safety and environmental guidelines, policies and procedures.Requires working with a wide variety of other job groups and involves working around traffic, heights, electricity, hydraulics, and heavy equipment including moving parts.Assisting crew members and working in a team environment.Minimum QualificationsRequired Experience is Proportionate with the selected job level:The Industrial Maintenance Tech level 1 High School Diploma or General Education Diploma; associate degree in electrical technology preferred.Minimum of 1-2 years of experience in an industrial maintenance roleThe Senior Industrial Maintenance Tech High School Diploma or General Education Diploma; associate degree in electrical technology preferred.Minimum of -3-4 years of experience in an industrial maintenance roleSkills, Abilities & Other RequirementsMust be able to efficiently and effectively use a computer, CMMS and related software related to record-keeping and machine troubleshooting/maintenance.Strong mathematical ability is essential.Must be self-driven and able to drive organizational change.Must work well in a team environment.Must be willing to learn and perform with minimal direction.Must have mechanical and electrical knowledge.Must have basic computer skills: Microsoft SuiteMust be fluent in English with good written and verbal communication skills.Must have manual dexterity.Ability of strong mechanical aptitude.Ability to read mechanical and electrical schematics.Ability to troubleshoot and repair low voltage (12 v DC) - high voltage (480 v AC 3 Phase) electrical systems.Ability to visually and mentally make priority decisions and independent judgment calls based on the situation at hand.Ability to work long hours and weekends.Ability to operate hand and power tools, industrial machines, digital cameras, phones, scanners, tools, and controls in a safe manner.Ability to work and concentrate in a noisy environment.Working & Environmental ConditionsSafety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities.Required to wear personal protective equipment (PPE) (i.e., safety shoes, hard hats, bump caps, safety glasses, hearing protection, safety harnesses as required) and respirators when required.Must be able to work from all types of ladders (step ladders, "A" frame ladders, etc.)Specific vision abilities required include close vision, distance vision, color perception, peripheral vision, depth perception, and ability to adjust focus, hand-eye coordination.Working at heights usually no higher than 20 feet in the air on an elevated structure using proper lift equipment and Fall Protection Equipment.Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs or step ladders.Bending the body at the waist, the legs at the knees, and extending arms and hands in any directionContinuous standing and walkingAble to use upper extremities frequently, work with both arms above shoulders and use both arms at full length frequently.Must be able to meet physical lifting demand up to 50lbs.Frequent use of hand tools and power toolsMore InformationThis job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties.*Posted position does not provide visa sponsorship or relocation.#LI-KC1About UsIn our 70+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated and assembled to customer specifications!Powered by Innovation - Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story, and let us help you write yours. Hard work pays off in all of our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted.We are an Affirmative Action and Equal Opportunity Employer/Vet/DisabilityIf you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.