At Houston Methodist, the Senior Radiation Physicist is responsible for ensuring the safe and accurate use of radiation for therapy as prescribed by the Physician through oversight of the technical aspects of radiation therapy, including imaging, planning, treatment, and associated procedures, and protecting patients, staff and public from radiation harm. Performs quality assurance testing, calibrates radiation therapy equipment, leads the implementation of new technologies, and develops policies and procedures. The incumbent will develop testing, evaluate performance, and documentation adhering to accreditation and regulatory requirements. This position will also assist in the training of junior level Radiation Physicists and residents. PEOPLE ESSENTIAL FUNCTIONSWorks with therapy staff to ensure that periodic machine quality assurance is routinely and appropriately performed.Surveilles engineering/vendor staff work to ensure machine repairs and upgrades are adequately performed and machine performance verified.Provides consultation to physicians, and guidance to dosimetrists and therapists regarding best approaches to simulate, plan, image and treat patients to assure accurate delivery of prescribed radiation dosage to a specific human patient, and the associated risk.Supports the training of departmental personnel as needed to effectively and safely utilize equipment for patient care and the didactic education and hands-on training for radiation oncology and medical physics residents and other trainees. Provides guidance and supervision to junior medical physicist.SERVICE ESSENTIAL FUNCTIONSDevelops procedures for testing and evaluating performance levels of radiotherapy treatment and simulation equipment. Assists in the development and execution of plans for acceptance and commissioning of new radiotherapy and dosimetry equipment and software.Provides documentation that radiotherapy treatment and simulation equipment meet accreditation and regulatory compliance requirements. Participates in the specification of the physics instrumentation used in the measurement and performance testing of therapeutic equipment.Participates in the development and management of quality control program for a radiation treatment facility that includes applicable facility accreditation requirements, and the review of policies and procedures pertaining to therapeutic radiation and its safe and appropriate use.QUALITY/SAFETY ESSENTIAL FUNCTIONSEnsures that quality assurance is performed to verify proper functioning after installation, repair or upgrade of radiation treatment equipment and software. It includes acceptance testing of radiotherapy treatment and simulation equipment, calibration and characterization of radiation beams from therapeutic equipment including radiation quantity, quality, and distribution characteristics, and assessment of the mechanical and geometric optics for proper placement of the beam. It also includes calibration and/or verification of the physical and radiological characteristics of brachytherapy sources.Advances the implementation and management of dosimetric and beam delivery aspects of external beam delivery, brachytherapy irradiation and special procedures. External beam delivery aspects include treatment aids, beam modifiers, and geometrical arrangements. Special procedures are included for both external beam (e.g. radiosurgery, total body irradiation, total skin irradiation, intraoperative therapy) and brachytherapy (e.g. high dose rate, intravascular brachytherapy).Guides the acceptance testing, management, and supervision of computer systems used for treatment planning and calculation of treatment times or monitor units. This includes measurement and input of dosimetry data base and verification of output for external beam radiotherapy and brachytherapy.Ensures the completion of periodic quality assurance and calibrations for radiation treatment equipment, software, and instrumentation in accordance to Part 25 Texas Administrative Code 289 as well as recommendations from vendors and professional organizations.Ensures that patient-specific quality assurance, including initial and periodic treatment plan checks and measurements if required, are performed on a timely manner.Coordinates and participates in the development and/or evaluation of a radiation safety program in a therapeutic radiation facility including written procedures for the protection of patients, workers, and the public, as well as in the protective shielding design and radiation safety surveys in a radiotherapy facility.FINANCE ESSENTIAL FUNCTIONSDevelops specifications for radiotherapy treatment and simulation equipment, including software. Provides equipment and software evaluations of value and performance and recommendations on possible equipment and software purchases.GROWTH/INNOVATION ESSENTIAL FUNCTIONSDevelops and participates in clinical research and development projects as well as other research projects that are consistent with departmental goals.This job description is not intended to be all-inclusive; the employee will also perform other reasonably related business/job duties as assigned. Houston Methodist reserves the right to revise job duties and responsibilities as the need arises. EDUCATIONM.S. degree in physical scienceWORK EXPERIENCEFive years of experience in therapeutic medical physics in a hospital/clinic-based environment LICENSES AND CERTIFICATIONS - REQUIREDMPHYS - Medical Physicists - State Licensure ANDCertified by the American Board of Medical Physics in Therapeutic/Medical/Radiological/ Radiation Oncology Physics: ABR or ABR-ONC or ABR-TMP KNOWLEDGE, SKILLS, AND ABILITIESDemonstrates the skills and competencies necessary to safely perform the assigned job, determined through on-going skills, competency assessments, and performance evaluationsSufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or securityAbility to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principlesSUPPLEMENTAL REQUIREMENTSWORK ATTIREUniform NoScrubs YesBusiness professional YesOther (department approved) NoON-CALL**Note that employees may be required to be on-call during emergencies (ie. DIsaster, Severe Weather Events, etc) regardless of selection below.On Call* YesTRAVEL****Travel specifications may vary by department**May require travel within the Houston Metropolitan area YesMay require travel outside Houston Metropolitan area NoCompany Profile:Houston Methodist Specialty Physician Group is an integral part of Houston Methodist’s overall strategy to become one of the nation’s leading academic medical centers. Established as a nonprofit corporation certified by the Texas State Board of Medical Examiners, the Specialty Physician Group enables physicians to maintain autonomy with respect to clinical practice while growing their practice within an academic environment.Houston Methodist is an Equal Opportunity Employer.

Living Our ValuesAll associates are guided by Our Values. Our Values are the unifying foundation of our companies. We strive to ensure that every decision we make and every action we take demonstrates Our Values. We believe that putting Our Values into practice creates lasting benefits for all of our associates, shareholders, and the communities in which we live.Why Join UsCareer Growth: Advance your career with opportunities for leadership and personal development.Culture of Excellence: Be part of a supportive team that values your input and encourages innovation.Competitive Benefits: Enjoy a comprehensive benefits package that looks after both your professional and personal needs.Total RewardsOur Total Rewards package underscores our commitment to recognizing your contributions. We offer a competitive and fair compensation structure that includes base pay and performance-based rewards. Compensation is based on skill set, experience, qualifications, and job-related requirements. Our comprehensive benefits package includes medical, dental, and vision insurance, wellness programs, retirement plans, and generous paid leave. Discover more about what we offer by visiting our Benefits page.A Day In The LifeDriving implementation of continuous improvement principles throughout the VPC and/ or PDC 2.) Developing, maintaining and controlling all production processes throughout the VPC and PDC. 3.) Maintaining open lines of communication with line and staff members to monitor and report progress of key initiatives. 4.) Presenting opportunities, analysis, observations and recommendations to the VPC and/or PDC leadership and contribute to strategic and operational decisions involving process redesigns, equipment modifications, and tooling changes. 5.) Maintaining an awareness of leading-edge technology trends and capabilities and assists leadership team in developing future value stream state maps and site vision.As a Process Engineer you will:Reliable, consistent, on-site attendance is a requirement. This position requires you to be punctual and dependable in order to meet the needs of the business; including attending and participating in meetings and presentations.Implement continuous improvement principles throughout the VPC and/or PDC.Develop, maintain and control all production processes throughout the VPC and/or PDC.Maintain open lines of communication with line and staff members to monitor and report progress of key initiatives.Present process improvement opportunities, analysis, observations and recommendations to the Director of OperationsMaintain an awareness of leading-edge technology trends in vehicle manufacturing.Design and develop job instructions and accessory installation times for the VPC and/or PDC.Develop standards and documentation relating to, but not limited to facility planning, process design and vehicle flowDevelop and implement strategic plans, standard data charts and work instructions.Train the VPC associates to understand continuous improvement concepts.Coordinate with other departments to ensure accessories launched at the VPC are properly suited for a high-volume manufacturing environment.Responsibly receive, transmit, and handle consumer and customer data per applicable policies and procedures.Review and follow data privacy practices, policies, and guidelines.What We Need From YouBachelor's Degree Industrial Engineering or Mechanical Engineering from an accredited four-year college or university Req and5-7 years Operations experience, including but not limited to auditing, operations analysis, and successful implementation of performance enhancement initiatives. RequiredExperience on the implementation of lean tools such as Standard Work, 5S, Visual Management, Kanban, Material Routes, Level Loading, and Poka-yoke. (High proficiency)Experience in problem-solving in any of the following methodologies: 8Ds, Kepner and Tregoe, Shainin, Red X and Six Sigma. (High proficiency)Experience in Value Stream Mapping. (High proficiency)Ability to read, analyze and interpret common scientific and technical journals, financial reports, and legal documents.Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.Ability to effectively communicate and interface with diverse audiences is critical. (High proficiency)Experience leading and coaching Kaizen work teams is necessary as is the ability to motivate and inspire others to take the initiative to make things better. (High proficiency)Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.Solid working knowledge of AutoCAD and Microsoft Office is necessarySAP, Minitab, Tableau, Denodo, Simul8 experience preferredDemonstrate action planning and coordination skills.Demonstrate excellent technical analysis and diagnostic skills.Is able to promote, coordinate, and implement change.Ability to understand and apply GST financial and productivity measures.DL NUMBER - Driver License, Valid and in State RequiredSix Sigma Green Belt Certification PreferredLiving Our ValuesAll associates are guided by Our Values. Our Values are the unifying foundation of our companies. We strive to ensure that every decision we make and every action we take demonstrates Our Values. We believe that putting Our Values into practice creates lasting benefits for all of our associates, shareholders, and the communities in which we live.Why Join UsCareer Growth: Advance your career with opportunities for leadership and personal development.Culture of Excellence: Be part of a supportive team that values your input and encourages innovation.Competitive Benefits: Enjoy a comprehensive benefits package that looks after both your professional and personal needs.Total RewardsOur Total Rewards package underscores our commitment to recognizing your contributions. We offer a competitive and fair compensation structure that includes base pay and performance-based rewards. Compensation is based on skill set, experience, qualifications, and job-related requirements. Our comprehensive benefits package includes medical, dental, and vision insurance, wellness programs, retirement plans, and generous paid leave. Discover more about what we offer by visiting our Benefits page.A Day In The LifeDriving implementation of continuous improvement principles throughout the VPC and/ or PDC 2.) Developing, maintaining and controlling all production processes throughout the VPC and PDC. 3.) Maintaining open lines of communication with line and staff members to monitor and report progress of key initiatives. 4.) Presenting opportunities, analysis, observations and recommendations to the VPC and/or PDC leadership and contribute to strategic and operational decisions involving process redesigns, equipment modifications, and tooling changes. 5.) Maintaining an awareness of leading-edge technology trends and capabilities and assists leadership team in developing future value stream state maps and site vision.As a Process Engineer you will:Reliable, consistent, on-site attendance is a requirement. This position requires you to be punctual and dependable in order to meet the needs of the business; including attending and participating in meetings and presentations.Implement continuous improvement principles throughout the VPC and/or PDC.Develop, maintain and control all production processes throughout the VPC and/or PDC.Maintain open lines of communication with line and staff members to monitor and report progress of key initiatives.Present process improvement opportunities, analysis, observations and recommendations to the Director of OperationsMaintain an awareness of leading-edge technology trends in vehicle manufacturing.Design and develop job instructions and accessory installation times for the VPC and/or PDC.Develop standards and documentation relating to, but not limited to facility planning, process design and vehicle flowDevelop and implement strategic plans, standard data charts and work instructions.Train the VPC associates to understand continuous improvement concepts.Coordinate with other departments to ensure accessories launched at the VPC are properly suited for a high-volume manufacturing environment.Responsibly receive, transmit, and handle consumer and customer data per applicable policies and procedures.Review and follow data privacy practices, policies, and guidelines.What We Need From YouBachelor's Degree Industrial Engineering or Mechanical Engineering from an accredited four-year college or university Req and5-7 years Operations experience, including but not limited to auditing, operations analysis, and successful implementation of performance enhancement initiatives. RequiredExperience on the implementation of lean tools such as Standard Work, 5S, Visual Management, Kanban, Material Routes, Level Loading, and Poka-yoke. (High proficiency)Experience in problem-solving in any of the following methodologies: 8Ds, Kepner and Tregoe, Shainin, Red X and Six Sigma. (High proficiency)Experience in Value Stream Mapping. (High proficiency)Ability to read, analyze and interpret common scientific and technical journals, financial reports, and legal documents.Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.Ability to effectively communicate and interface with diverse audiences is critical. (High proficiency)Experience leading and coaching Kaizen work teams is necessary as is the ability to motivate and inspire others to take the initiative to make things better. (High proficiency)Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.Solid working knowledge of AutoCAD and Microsoft Office is necessarySAP, Minitab, Tableau, Denodo, Simul8 experience preferredDemonstrate action planning and coordination skills.Demonstrate excellent technical analysis and diagnostic skills.Is able to promote, coordinate, and implement change.Ability to understand and apply GST financial and productivity measures.DL NUMBER - Driver License, Valid and in State RequiredSix Sigma Green Belt Certification PreferredTravel Requirements10% Minimal travel is required for this position (up to 10% of the time and on a domestic basis).Join UsThe Friedkin Group and its affiliates are committed to ensuring equal employment opportunities, including providing reasonable accommodations to individuals with disabilities. If you have a disability and would like to request an accommodation, please contact us at . We celebrate diversity and are committed to creating an inclusive environment for all associates.We are seeking candidates legally authorized to work in the United States, without Sponsorship.HP125

We are looking for Part-Time Night Trash Collectors to join us!
You must have an open bed pickup truck or vehicle with trailer.
Are you interested in a part-time opportunity to earn extra income in the evenings? Do you like working outdoors and staying active? If so, you may be a good fit for our Apartment Trash Collector position.
Valet Living is hiring for a Part Time Apartment Trash Collector (Service Valet) to work during the evening hours in your local area. This is a great paying, part time job that is a great way to earn extra money or supplement income while working another job.  You’ll enjoy working outdoors, on your own, in a stress-free environment and get a workout while you do this job.  We are an essential business that continues to grow, and our associates benefit from reliable hours, consistent pay, and promotional advancement opportunities.
We offer an immediate start date and provide hands-on, paid training. No experience is necessary.
Collect trash and recycling bags door to door within a local apartment community and take these items to the trash compactor or dumpster on the property site (no large or bulk items and no offsite driving and/or dumping) Typically work 5 nights a week from Sunday through Thursday. Enjoy weekends off! Work 2-3 hours per night, start time is either 7:00pm or 8:00pm and you are done between 10:00 pm - 11:00 pm (some positions may have earlier start/end times and Sundays may require more hours) Part time hours working 10-15+ hours per week
Benefits: 
Great pay - pickup truck owners and vehicles using trailers will receive the higher part of our pay range. Get paid as you earn using EarnIn**. All driving is done while on community property – no offsite driving or dumping. Paid training and opportunity for growth within the company Employee referral bonus program – get paid for your referrals Earn reward incentives through our recognition program Tuition reimbursement Stay physically fit while working outdoors
**EarnIn is a mobile app that gives people access to their money as they earn it – without waiting for payday.
Qualifications: Must be at least 18 years of age A smart phone with data plan to access our mobile app An open bed pickup truck or vehicle with trailer A valid driver's license Current auto insurance in your name for your vehicle Ability to work indoors or outdoors in changing weather conditions Ability to lift and transport up to 50 lbs
Safety statement: Socially distanced work environment All required Personal Protective Equipment (face covering, gloves, safety vest, etc.) is provided free of charge Our processes exceed the CDC and OSHA guidelines on COVID-19 safety Zero reported occupationally transmitted cases of COVID-19 Dedicated team of occupational health & safety professionals that manage all aspects of associate safety, including COVID-19 protocols.
Valet Living is an Equal Opportunity Employer that values the strength diversity brings to the workplace. We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law.

We are seeking hardworking, reliable, and safety-conscious Laborers to join our heavy highway civil construction team in Houston, Texas. The ideal candidate will assist in various phases of highway, roadway, and bridge construction, working outdoors in all weather conditions and supporting skilled tradesmen and equipment operators to complete high-quality infrastructure projects.
Job Duties Include: Assist with site preparation, excavation, grading, and clean-up. Load, unload, and transport construction materials and tools. Use hand and power tools such as shovels, rakes, compactors, and jackhammers. Set up and take down traffic control devices and temporary construction barriers. Assist in the installation of storm drainage, sewer, water lines, and other underground utilities. Work closely with equipment operators and follow verbal and written instructions. Maintain a clean and safe job site, following company and OSHA safety regulations. Perform other duties as assigned by lead-man, foreman or supervisor. Performs other duties as assigned.
Hourly rate of pay is $16 - $20 depending on experience.
*Benefits: Health Dental 401K Life Insurance *Waiting period may apply
Requirements: Previous experience in civil or highway construction is preferred but not required. Ability to perform physical labor for extended periods (lifting up to 100 lbs, bending, kneeling, standing). Willingness to work in variable outdoor conditions (heat, cold, rain, etc.). Ability to follow instructions and work as part of a team. Must have reliable transportation Must be authorized to work in the U.S.
Preferred Skills: Valid driver’s license. Experience with concrete work, form setting, or asphalt paving. Familiarity with trench safety, traffic control, and utility installation. OSHA 10 or OSHA 30 certification is a plus.
Physical Requirements & Working Conditions: This position requires strenuous physical labor on active construction sites. Laborers must frequently stand, walk, bend, stoop, squat, kneel, climb, and reach during the workday. Tasks include shoveling, raking, compacting, loading, unloading, and moving materials and tools. The role requires lifting, carrying, pushing, or pulling objects weighing up to 100 pounds. Laborers must have good hand-eye coordination and the ability to work safely around heavy machinery and traffic. Repetitive motions and the use of hand tools are common. Visual acuity and hearing are essential for communication and hazard awareness. The work is performed outdoors in all weather conditions, including extreme heat, cold, rain, and wind. Job sites may include loud noise, dust, uneven terrain, and exposure to fumes and vibrations. Personal protective equipment (PPE) such as hard hats, safety-toed boots, safety glasses, gloves, and high-visibility vests must be worn at all times. The role demands physical endurance, mental focus, and a strong commitment to safety in a dynamic and potentially hazardous environment.

We are looking for an experienced Asphalt Milling Machine Operator with a valid CDL to join our heavy highway civil construction team in Houston, Texas. This position is responsible for operating milling machines to remove asphalt pavement prior to resurfacing. The ideal candidate will have knowledge of machine setup, milling depths, grades, and be capable of safely operating and transporting the equipment.
Job Duties Include: Operate asphalt milling machines to remove existing pavement surfaces to specified depths and grades. Coordinate with ground personnel to ensure milling accuracy and job safety. Perform pre- and post-operation equipment inspections, daily maintenance and repairs. Safely load, transport, and unload milling equipment using CDL-class vehicles. Adjust controls to regulate speed, depth, and alignment based on specifications. Monitor milling progress to ensure surface quality and correct deficiencies. Adhere to safety protocols and job site regulations at all times. Performs other duties as assigned.
Hourly rate of pay is $22 - $30+ depending on experience.
*Benefits: Health Dental 401K Life Insurance *Waiting period may apply
Requirements: Valid Class A Commercial Driver’s License (CDL) with clean driving record. Minimum 2 years of experience operating asphalt milling machines. Understanding of milling equipment operation, safety, and maintenance. Strong communication skills and attention to detail. Must be authorized to work in the U.S.
Preferred Skills: Experience working on TXDOT or municipal roadway projects. Mechanical aptitude for troubleshooting minor equipment issues. OSHA 10 or OSHA 30 certification. Ability to operate additional paving or support equipment.
Physical Requirements & Working Conditions: This position is physically demanding and performed primarily in the field at active construction sites. The work requires frequent standing, walking, bending, stooping, squatting, kneeling, climbing, and reaching throughout the shift. Must have the physical strength and stamina to perform repetitive manual labor and operate heavy machinery in variable site conditions. May be required to lift, carry, push, and pull materials and tools weighing up to 100 pounds, often without mechanical assistance. Operators may engage in activities when entering, exiting, or servicing equipment, and must also demonstrate manual dexterity and hand-eye coordination to control levers, pedals, and instruments inside the equipment cab. Good visual acuity, hearing, and spatial awareness are essential for safety and effective task execution in busy job sites. Work involves prolonged exposure to outdoor conditions, including extreme heat, cold, humidity, wind, rain, and direct sunlight. The environment may include loud noise, vibrations, moving vehicles, airborne dust, and hazardous materials. The role may also involve work at heights, confined spaces, and uneven or unstable terrain. Personal protective equipment (PPE) such as hard hats, safety glasses, hearing protection, gloves, high-visibility vests, and safety-toed boots must be worn at all times on job sites. Due to the nature of the work, employees must be capable of maintaining physical and mental focus throughout long shifts and reacting quickly to dynamic, potentially hazardous conditions. Reliable attendance, situational awareness, and strict adherence to safety protocols are essential requirements of the role.

We are looking for an experienced Asphalt Paving Machine Operator with screed knowledge to join our team for heavy highway civil construction projects in the Houston, Texas area. This role is responsible for operating asphalt pavers and adjusting screed settings to ensure accurate material placement and smooth finishes. Candidates must be detail-oriented and have a strong understanding of paving operations.
Job Duties Include: Operate asphalt paving machines to place hot mix asphalt according to line, grade, and slope. Set up and monitor screed operations for proper depth, width, and crown of mat. Coordinate with truck drivers and crew members to ensure continuous paving operations. Make screed adjustments on the fly to correct mat imperfections and maintain a smooth surface. Inspect equipment daily and perform basic maintenance tasks as needed. Maintain communication with the paving foreman and crew for seamless operation. Adhere to all safety regulations and quality standards throughout the project. Perform other administrative and operational duties as assigned.
Hourly rate of pay is $22 - $28+ depending on experience.
*Benefits: Health Dental 401K Life Insurance *Waiting period may apply
Requirements: Minimum 2 years of experience operating asphalt paving machines and screed equipment. In-depth knowledge of paving operations, screed adjustment, and material behavior. Ability to work in outdoor environments with exposure to heat and physical labor. Capable of lifting up to 100 lbs. and standing for long periods. Reliable transportation and a valid driver’s license. Must be authorized to work in the U.S.
Preferred Skills: Experience working on TXDOT or other municipal paving projects. OSHA 10 or OSHA 30 certification. Ability to operate other paving-related equipment (rollers, skid steers, etc.). Mechanical aptitude to troubleshoot minor issues with paving equipment.
Physical Requirements & Working Conditions: This position is physically demanding and performed primarily in the field at active construction sites. The work requires frequent standing, walking, bending, stooping, squatting, kneeling, climbing, and reaching throughout the shift. Must have the physical strength and stamina to perform repetitive manual labor and operate heavy machinery in variable site conditions. May be required to lift, carry, push, and pull materials and tools weighing up to 100 pounds, often without mechanical assistance. Operators may engage in activities when entering, exiting, or servicing equipment, and must also demonstrate manual dexterity and hand-eye coordination to control levers, pedals, and instruments inside the equipment cab. Good visual acuity, hearing, and spatial awareness are essential for safety and effective task execution in busy job sites. Work involves prolonged exposure to outdoor conditions, including extreme heat, cold, humidity, wind, rain, and direct sunlight. The environment may include loud noise, vibrations, moving vehicles, airborne dust, and hazardous materials. The role may also involve work at heights, confined spaces, and uneven or unstable terrain. Personal protective equipment (PPE) such as hard hats, safety glasses, hearing protection, gloves, high-visibility vests, and safety-toed boots must be worn at all times on job sites. Due to the nature of the work, employees must be capable of maintaining physical and mental focus throughout long shifts and reacting quickly to dynamic, potentially hazardous conditions. Reliable attendance, situational awareness, and strict adherence to safety protocols are essential requirements of the role.

We are seeking an experienced Asphalt Roller Operator to join our paving team for heavy highway civil construction projects in the Houston, Texas area. This role involves operating rollers to compact asphalt to the proper density and smoothness in accordance with project specifications. Attention to detail and knowledge of compaction techniques are essential to success in this position.
Job Duties Include: Operate steel drum and pneumatic rollers to compact hot mix asphalt. Monitor mat temperatures, thickness, and density to ensure proper compaction. Work closely with the paving crew to coordinate rolling patterns and timing. Perform routine maintenance checks and minor repairs on roller equipment. Assist with other paving-related tasks as needed, including handwork. Adhere to safety procedures and maintain a clean, safe work environment. Complete equipment logs and daily reports as required. Perform other administrative and operational duties as assigned.
Hourly rate of pay is $21 - $26+ depending on experience.
*Benefits: Health Dental 401K Life Insurance *Waiting period may apply
Requirements: Minimum 2 years of experience operating asphalt rollers in paving operations. Understanding of compaction techniques, asphalt materials, and project specifications. Ability to work outdoors in various weather conditions and lift up to 100 lbs. Strong attention to detail and ability to detect surface imperfections. Reliable transportation and a valid driver’s license. Must be authorized to work in the U.S.
Preferred Skills: Experience working on TXDOT or municipal paving projects. OSHA 10 or OSHA 30 certification. Ability to operate additional paving-related equipment (pavers, skid steers, etc.). Basic mechanical knowledge for troubleshooting equipment issues.
Physical Requirements & Working Conditions: This position is physically demanding and performed primarily in the field at active construction sites. The work requires frequent standing, walking, bending, stooping, squatting, kneeling, climbing, and reaching throughout the shift. Must have the physical strength and stamina to perform repetitive manual labor and operate heavy machinery in variable site conditions. May be required to lift, carry, push, and pull materials and tools weighing up to 100 pounds, often without mechanical assistance. Operators may engage in activities when entering, exiting, or servicing equipment, and must also demonstrate manual dexterity and hand-eye coordination to control levers, pedals, and instruments inside the equipment cab. Good visual acuity, hearing, and spatial awareness are essential for safety and effective task execution in busy job sites. Work involves prolonged exposure to outdoor conditions, including extreme heat, cold, humidity, wind, rain, and direct sunlight. The environment may include loud noise, vibrations, moving vehicles, airborne dust, and hazardous materials. The role may also involve work at heights, confined spaces, and uneven or unstable terrain. Personal protective equipment (PPE) such as hard hats, safety glasses, hearing protection, gloves, high-visibility vests, and safety-toed boots must be worn at all times on job sites. Due to the nature of the work, employees must be capable of maintaining physical and mental focus throughout long shifts and reacting quickly to dynamic, potentially hazardous conditions. Reliable attendance, situational awareness, and strict adherence to safety protocols are essential requirements of the role.

We are looking for an experienced Asphalt Raker to join our paving crew for heavy highway civil construction projects in the Houston, Texas area. The Asphalt Raker is responsible for spreading, leveling, and smoothing hot mix asphalt on roadways, parking lots, and other surfaces using hand tools. This role is essential to ensuring a high-quality, uniform finish for all paved surfaces.
Job Duties Include: Rake and level hot mix asphalt to achieve proper grade and smoothness. Assist with luting, shoveling, and general placement of asphalt materials. Work alongside the paving machine and roller to ensure consistent surface quality. Maintain tools and ensure work area is clean and safe. Communicate effectively with the paving foreman and other crew members. Follow safety guidelines and wear required PPE at all times. Assist with other tasks related to paving and site preparation as needed. Perform other administrative and operational duties as assigned.
Hourly rate of pay is $20 - $22+ depending on experience.
*Benefits: Health Dental 401K Life Insurance *Waiting period may apply
Requirements: Minimum 1 year of experience in asphalt paving or a related role. Familiarity with hand tools used in asphalt work (lutes, rakes, shovels, etc.). Reliable transportation and a valid driver’s license. Must be authorized to work in the U.S.
Preferred Skills: Experience on TXDOT or municipal paving projects. Knowledge of asphalt compaction and surface tolerances. OSHA 10 certification. Ability to operate small paving-related equipment (plate compactor, roller, etc.).
Physical Requirements & Working Conditions: This position involves performing physically demanding work on paving crews to spread, level, and smooth asphalt on roadways, parking lots, and other surfaces. Asphalt Rakers use hand tools such as rakes and lutes to ensure a consistent surface finish and proper grade, working in close coordination with the paving machine and roller operators. The role requires frequent and prolonged standing, walking, bending, stooping, kneeling, and reaching , often on hot pavement and in high-temperature conditions. Asphalt Rakers must be able to lift, carry, push, and pull tools and materials weighing up to 100 pounds. Tasks demand manual dexterity, physical strength, and good hand-eye coordination for effective asphalt placement and manipulation. Work is performed outdoors in extreme heat, humidity, sun exposure, and around high-temperature asphalt. The work environment includes loud noise, vibrations, dust, fumes, and moving equipment. Surfaces may be uneven or slippery, and the role requires constant situational awareness for safety. Proper use of personal protective equipment (PPE) —including gloves, long sleeves, high-visibility vests, safety glasses, hard hats, and safety-toed boots—is required. The position demands physical stamina, focus, and a strong safety mindset , especially when working in fast-paced, high-traffic construction zones.

In this role you will be driving sales and revenue growth for our company by promoting and selling our technical products and services to prospective clients. You will serve as the primary point of contact between our organization and potential customers, understanding their needs, providing technical expertise, and delivering tailored solutions to meet their requirements. This position requires a strong blend of sales skills and customer relationship management.
We’re a national job board based out of Houston providing unique, specialized recruiting solutions and technology with a boutique approach. We sell recruitment advertising. We’re hands-on, work closely with our clients, have more product options and are customized to each client’s needs. We’re a family-owned business with a close-knit, fun corporate culture. Our most successful reps earn $80k to $120k per year while only working 35 hours per week!!!
Base + 15% Commission. Small office, nice atmosphere & women owned. $50,000 to $60,000++ your first year. After that successful reps earn $80k-$120k per year. 15% commission on all sales plus a base of $30k per year. North Houston, 1960/Champions area.
Schedule: Monday-Friday 9am to 5pm Pay: $50,000-$120,000 per year
Responsibilities: Identify and qualify new business opportunities by researching and prospecting potential clients, generating sales through cold calling, virtual meetings. Initiate thorough conversations with prospects to identify their needs and provide technical expertise and guidance on our products and services to address those specific needs. Present and demonstrate our technical products and services to clients, highlighting key features and benefits, and articulating how they can address customer challenges and improve their business operations. Collaborate with our directors and technology experts to develop and deliver tailored proposals, presentations, and solution demonstrations that align with customer needs and requirements. Negotiate pricing, contracts, and terms of sale to close deals and secure new business opportunities, while ensuring profitability and customer satisfaction. Build and maintain strong relationships with customers, providing ongoing support, troubleshooting assistance, and addressing any concerns or issues that may arise. Anticipate customer needs and proactively identify opportunities for product enhancements or new offerings. Achieve and exceed sales targets and performance metrics through effective pipeline management, accurate forecasting, and regular reporting on sales activities, opportunities, and results.
Required Skills: Technical aptitude to understand and be trained on the products and services being sold, along with the ability to effectively communicate technical concepts. Excellent sales and negotiation skills, with a proven track record of achieving and exceeding sales targets. Exceptional communication and interpersonal skills, with the ability to build rapport, establish trust, and develop long-lasting relationships with clients. Ability to identify and reach decision makers at key levels. Solid problem-solving and analytical abilities, with the capacity to understand customer needs, identify solutions, and recommend appropriate products or services. Self-motivated and driven, with the ability to work independently and as part of a team, while managing multiple priorities and deadlines. Proficiency in CRM systems and sales tools for pipeline management, reporting, and sales forecasting. Strong organizational and time management skills, with attention to detail and accuracy in record-keeping and documentation.
Required Experience: Proven experience in sales, preferably in a B2B environment. Familiarity with a range of technical products and services, with the ability to quickly acquire product knowledge. Knowledge of sales techniques and strategies, including consultative selling and solution selling approaches. Feel comfortable with and have experience selling over the phone. Enjoy working in a small office environment. At least 1 year of commission related Sales Experience. 1 year of B2B sales Inside sales - making sales over the phone Cold calling
Our employees benefit from: Base pay plus uncapped commission on all self sold accounts. Repeat and ongoing commission on accounts you’ve sold. An upbeat, fun, positive work environment. Long term, professional, stable career opportunity. Great Hours (Monday -Friday 9am 5pm). Big monthly bonuses & incentives. ($500 to $1000+) Woman Owned business environment. Business casual dress code. Paid vacation and personal time off.
Benefits: Paid time off Paid training Referral program
Compensation Package: Bonus opportunities Commission pay Monthly bonus Performance bonus Uncapped commission

Our position is business to business sales and pays a base plus residual, ongoing commission on accounts. We’re a Houston based job board with national exposure. We provide unique, specialized recruiting solutions and technology. We sell recruitment advertising. We’re hands-on, have more product options and are customized to each client’s needs. We’re a woman owned and a family-owned business with a close-knit, fun corporate culture. Reps earn $50K to $60K their 1st year. Our most successful reps earn $80,000 to $120k per year working 35 hours per week.
Position Overview: Small office, low stress atmosphere. $50,000+ your first year. Earnings based on 15% commission on all sales plus a base of $30K per year.
Business to business advertising sales primarily over the phone. Develop and maintain relationships with decision-makers. Learn their needs and convey the value of our products and technology. Close sales and achieve sales targets.
We’re a Houston based job board with national exposure. For over 25 years JobSparx has provided unique, specialized recruiting solutions and technology. We sell recruitment advertising. We’re hands-on, have more product options and are customized to each client’s needs.
Our employees benefit from: Base pay plus uncapped commission on all self sold accounts. Repeat and ongoing commission on renewing accounts. An upbeat, fun, positive work environment. Long term, professional, stable career opportunity. Great Hours (Monday -Friday 9am - 5pm). Big monthly bonuses & incentives. Woman owned business environment. Business casual dress code. Paid vacation and personal time off.
Job Requirements: Commission related sales experience. Feel comfortable on the phone. Ability to identify and reach decision makers at key levels. Enjoy working in a small office environment. Must be personable, friendly, curious, confident and ambitious. Ability to learn fast and think on your feet.