We are seeking hardworking, reliable, and safety-conscious Laborers to join our heavy highway civil construction team in Houston, Texas. The ideal candidate will assist in various phases of highway, roadway, and bridge construction, working outdoors in all weather conditions and supporting skilled tradesmen and equipment operators to complete high-quality infrastructure projects.
Job Duties Include: Assist with site preparation, excavation, grading, and clean-up. Load, unload, and transport construction materials and tools. Use hand and power tools such as shovels, rakes, compactors, and jackhammers. Set up and take down traffic control devices and temporary construction barriers. Assist in the installation of storm drainage, sewer, water lines, and other underground utilities. Work closely with equipment operators and follow verbal and written instructions. Maintain a clean and safe job site, following company and OSHA safety regulations. Perform other duties as assigned by lead-man, foreman or supervisor. Performs other duties as assigned.
Hourly rate of pay is $16 - $20 depending on experience.
*Benefits: Health Dental 401K Life Insurance *Waiting period may apply
Requirements: Previous experience in civil or highway construction is preferred but not required. Ability to perform physical labor for extended periods (lifting up to 100 lbs, bending, kneeling, standing). Willingness to work in variable outdoor conditions (heat, cold, rain, etc.). Ability to follow instructions and work as part of a team. Must have reliable transportation Must be authorized to work in the U.S.
Preferred Skills: Valid driver’s license. Experience with concrete work, form setting, or asphalt paving. Familiarity with trench safety, traffic control, and utility installation. OSHA 10 or OSHA 30 certification is a plus.
Physical Requirements & Working Conditions: This position requires strenuous physical labor on active construction sites. Laborers must frequently stand, walk, bend, stoop, squat, kneel, climb, and reach during the workday. Tasks include shoveling, raking, compacting, loading, unloading, and moving materials and tools. The role requires lifting, carrying, pushing, or pulling objects weighing up to 100 pounds. Laborers must have good hand-eye coordination and the ability to work safely around heavy machinery and traffic. Repetitive motions and the use of hand tools are common. Visual acuity and hearing are essential for communication and hazard awareness. The work is performed outdoors in all weather conditions, including extreme heat, cold, rain, and wind. Job sites may include loud noise, dust, uneven terrain, and exposure to fumes and vibrations. Personal protective equipment (PPE) such as hard hats, safety-toed boots, safety glasses, gloves, and high-visibility vests must be worn at all times. The role demands physical endurance, mental focus, and a strong commitment to safety in a dynamic and potentially hazardous environment.

We are looking for an experienced Asphalt Milling Machine Operator with a valid CDL to join our heavy highway civil construction team in Houston, Texas. This position is responsible for operating milling machines to remove asphalt pavement prior to resurfacing. The ideal candidate will have knowledge of machine setup, milling depths, grades, and be capable of safely operating and transporting the equipment.
Job Duties Include: Operate asphalt milling machines to remove existing pavement surfaces to specified depths and grades. Coordinate with ground personnel to ensure milling accuracy and job safety. Perform pre- and post-operation equipment inspections, daily maintenance and repairs. Safely load, transport, and unload milling equipment using CDL-class vehicles. Adjust controls to regulate speed, depth, and alignment based on specifications. Monitor milling progress to ensure surface quality and correct deficiencies. Adhere to safety protocols and job site regulations at all times. Performs other duties as assigned.
Hourly rate of pay is $22 - $30+ depending on experience.
*Benefits: Health Dental 401K Life Insurance *Waiting period may apply
Requirements: Valid Class A Commercial Driver’s License (CDL) with clean driving record. Minimum 2 years of experience operating asphalt milling machines. Understanding of milling equipment operation, safety, and maintenance. Strong communication skills and attention to detail. Must be authorized to work in the U.S.
Preferred Skills: Experience working on TXDOT or municipal roadway projects. Mechanical aptitude for troubleshooting minor equipment issues. OSHA 10 or OSHA 30 certification. Ability to operate additional paving or support equipment.
Physical Requirements & Working Conditions: This position is physically demanding and performed primarily in the field at active construction sites. The work requires frequent standing, walking, bending, stooping, squatting, kneeling, climbing, and reaching throughout the shift. Must have the physical strength and stamina to perform repetitive manual labor and operate heavy machinery in variable site conditions. May be required to lift, carry, push, and pull materials and tools weighing up to 100 pounds, often without mechanical assistance. Operators may engage in activities when entering, exiting, or servicing equipment, and must also demonstrate manual dexterity and hand-eye coordination to control levers, pedals, and instruments inside the equipment cab. Good visual acuity, hearing, and spatial awareness are essential for safety and effective task execution in busy job sites. Work involves prolonged exposure to outdoor conditions, including extreme heat, cold, humidity, wind, rain, and direct sunlight. The environment may include loud noise, vibrations, moving vehicles, airborne dust, and hazardous materials. The role may also involve work at heights, confined spaces, and uneven or unstable terrain. Personal protective equipment (PPE) such as hard hats, safety glasses, hearing protection, gloves, high-visibility vests, and safety-toed boots must be worn at all times on job sites. Due to the nature of the work, employees must be capable of maintaining physical and mental focus throughout long shifts and reacting quickly to dynamic, potentially hazardous conditions. Reliable attendance, situational awareness, and strict adherence to safety protocols are essential requirements of the role.

We are looking for an experienced Asphalt Paving Machine Operator with screed knowledge to join our team for heavy highway civil construction projects in the Houston, Texas area. This role is responsible for operating asphalt pavers and adjusting screed settings to ensure accurate material placement and smooth finishes. Candidates must be detail-oriented and have a strong understanding of paving operations.
Job Duties Include: Operate asphalt paving machines to place hot mix asphalt according to line, grade, and slope. Set up and monitor screed operations for proper depth, width, and crown of mat. Coordinate with truck drivers and crew members to ensure continuous paving operations. Make screed adjustments on the fly to correct mat imperfections and maintain a smooth surface. Inspect equipment daily and perform basic maintenance tasks as needed. Maintain communication with the paving foreman and crew for seamless operation. Adhere to all safety regulations and quality standards throughout the project. Perform other administrative and operational duties as assigned.
Hourly rate of pay is $22 - $28+ depending on experience.
*Benefits: Health Dental 401K Life Insurance *Waiting period may apply
Requirements: Minimum 2 years of experience operating asphalt paving machines and screed equipment. In-depth knowledge of paving operations, screed adjustment, and material behavior. Ability to work in outdoor environments with exposure to heat and physical labor. Capable of lifting up to 100 lbs. and standing for long periods. Reliable transportation and a valid driver’s license. Must be authorized to work in the U.S.
Preferred Skills: Experience working on TXDOT or other municipal paving projects. OSHA 10 or OSHA 30 certification. Ability to operate other paving-related equipment (rollers, skid steers, etc.). Mechanical aptitude to troubleshoot minor issues with paving equipment.
Physical Requirements & Working Conditions: This position is physically demanding and performed primarily in the field at active construction sites. The work requires frequent standing, walking, bending, stooping, squatting, kneeling, climbing, and reaching throughout the shift. Must have the physical strength and stamina to perform repetitive manual labor and operate heavy machinery in variable site conditions. May be required to lift, carry, push, and pull materials and tools weighing up to 100 pounds, often without mechanical assistance. Operators may engage in activities when entering, exiting, or servicing equipment, and must also demonstrate manual dexterity and hand-eye coordination to control levers, pedals, and instruments inside the equipment cab. Good visual acuity, hearing, and spatial awareness are essential for safety and effective task execution in busy job sites. Work involves prolonged exposure to outdoor conditions, including extreme heat, cold, humidity, wind, rain, and direct sunlight. The environment may include loud noise, vibrations, moving vehicles, airborne dust, and hazardous materials. The role may also involve work at heights, confined spaces, and uneven or unstable terrain. Personal protective equipment (PPE) such as hard hats, safety glasses, hearing protection, gloves, high-visibility vests, and safety-toed boots must be worn at all times on job sites. Due to the nature of the work, employees must be capable of maintaining physical and mental focus throughout long shifts and reacting quickly to dynamic, potentially hazardous conditions. Reliable attendance, situational awareness, and strict adherence to safety protocols are essential requirements of the role.

We are seeking an experienced Asphalt Roller Operator to join our paving team for heavy highway civil construction projects in the Houston, Texas area. This role involves operating rollers to compact asphalt to the proper density and smoothness in accordance with project specifications. Attention to detail and knowledge of compaction techniques are essential to success in this position.
Job Duties Include: Operate steel drum and pneumatic rollers to compact hot mix asphalt. Monitor mat temperatures, thickness, and density to ensure proper compaction. Work closely with the paving crew to coordinate rolling patterns and timing. Perform routine maintenance checks and minor repairs on roller equipment. Assist with other paving-related tasks as needed, including handwork. Adhere to safety procedures and maintain a clean, safe work environment. Complete equipment logs and daily reports as required. Perform other administrative and operational duties as assigned.
Hourly rate of pay is $21 - $26+ depending on experience.
*Benefits: Health Dental 401K Life Insurance *Waiting period may apply
Requirements: Minimum 2 years of experience operating asphalt rollers in paving operations. Understanding of compaction techniques, asphalt materials, and project specifications. Ability to work outdoors in various weather conditions and lift up to 100 lbs. Strong attention to detail and ability to detect surface imperfections. Reliable transportation and a valid driver’s license. Must be authorized to work in the U.S.
Preferred Skills: Experience working on TXDOT or municipal paving projects. OSHA 10 or OSHA 30 certification. Ability to operate additional paving-related equipment (pavers, skid steers, etc.). Basic mechanical knowledge for troubleshooting equipment issues.
Physical Requirements & Working Conditions: This position is physically demanding and performed primarily in the field at active construction sites. The work requires frequent standing, walking, bending, stooping, squatting, kneeling, climbing, and reaching throughout the shift. Must have the physical strength and stamina to perform repetitive manual labor and operate heavy machinery in variable site conditions. May be required to lift, carry, push, and pull materials and tools weighing up to 100 pounds, often without mechanical assistance. Operators may engage in activities when entering, exiting, or servicing equipment, and must also demonstrate manual dexterity and hand-eye coordination to control levers, pedals, and instruments inside the equipment cab. Good visual acuity, hearing, and spatial awareness are essential for safety and effective task execution in busy job sites. Work involves prolonged exposure to outdoor conditions, including extreme heat, cold, humidity, wind, rain, and direct sunlight. The environment may include loud noise, vibrations, moving vehicles, airborne dust, and hazardous materials. The role may also involve work at heights, confined spaces, and uneven or unstable terrain. Personal protective equipment (PPE) such as hard hats, safety glasses, hearing protection, gloves, high-visibility vests, and safety-toed boots must be worn at all times on job sites. Due to the nature of the work, employees must be capable of maintaining physical and mental focus throughout long shifts and reacting quickly to dynamic, potentially hazardous conditions. Reliable attendance, situational awareness, and strict adherence to safety protocols are essential requirements of the role.

We are looking for an experienced Asphalt Raker to join our paving crew for heavy highway civil construction projects in the Houston, Texas area. The Asphalt Raker is responsible for spreading, leveling, and smoothing hot mix asphalt on roadways, parking lots, and other surfaces using hand tools. This role is essential to ensuring a high-quality, uniform finish for all paved surfaces.
Job Duties Include: Rake and level hot mix asphalt to achieve proper grade and smoothness. Assist with luting, shoveling, and general placement of asphalt materials. Work alongside the paving machine and roller to ensure consistent surface quality. Maintain tools and ensure work area is clean and safe. Communicate effectively with the paving foreman and other crew members. Follow safety guidelines and wear required PPE at all times. Assist with other tasks related to paving and site preparation as needed. Perform other administrative and operational duties as assigned.
Hourly rate of pay is $20 - $22+ depending on experience.
*Benefits: Health Dental 401K Life Insurance *Waiting period may apply
Requirements: Minimum 1 year of experience in asphalt paving or a related role. Familiarity with hand tools used in asphalt work (lutes, rakes, shovels, etc.). Reliable transportation and a valid driver’s license. Must be authorized to work in the U.S.
Preferred Skills: Experience on TXDOT or municipal paving projects. Knowledge of asphalt compaction and surface tolerances. OSHA 10 certification. Ability to operate small paving-related equipment (plate compactor, roller, etc.).
Physical Requirements & Working Conditions: This position involves performing physically demanding work on paving crews to spread, level, and smooth asphalt on roadways, parking lots, and other surfaces. Asphalt Rakers use hand tools such as rakes and lutes to ensure a consistent surface finish and proper grade, working in close coordination with the paving machine and roller operators. The role requires frequent and prolonged standing, walking, bending, stooping, kneeling, and reaching , often on hot pavement and in high-temperature conditions. Asphalt Rakers must be able to lift, carry, push, and pull tools and materials weighing up to 100 pounds. Tasks demand manual dexterity, physical strength, and good hand-eye coordination for effective asphalt placement and manipulation. Work is performed outdoors in extreme heat, humidity, sun exposure, and around high-temperature asphalt. The work environment includes loud noise, vibrations, dust, fumes, and moving equipment. Surfaces may be uneven or slippery, and the role requires constant situational awareness for safety. Proper use of personal protective equipment (PPE) —including gloves, long sleeves, high-visibility vests, safety glasses, hard hats, and safety-toed boots—is required. The position demands physical stamina, focus, and a strong safety mindset , especially when working in fast-paced, high-traffic construction zones.

T.G Meat Center is seeking to hire multiple meat cutters. This job requires a person to work in a cold refrigerated warehouse space. These are full-time positions, and we are looking to hire meat cutters with at least 1-2 years experience. Candidates that have experience cutting meat with commercial electric bandsaw are preferred. Work hours are 7am to 4pm, with occasional Saturdays and Overtime. All applicants will be contacted.
Benefits: Full Medical Dental Vision 401K Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: MUST be 18 years or older Able to utilize knives, saws, grinders and other equipment to perform meat cutting and trimming. Demonstrate the ability to identify different meat cuts. Willing to work individually as well as in a team. Maintain a safe environment- Personal Safety and Food Safety. Positive Attitude—makes everyone’s day better, including yours! Willing to learn and follow our processes. Ability to communicate verbally Be able to lift up to 60lbs Be physically able to load & unload a dolly or pallett Manufacturing experience is helpful, but not necessary.
T.G Meat Center  is a second chance employer. EOE. We celebrate diversity and are committed to creating an inclusive environment for all employees.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Powell is an engineered to order manufacturer of switchgear. We are currently seeking a Facilities Maintenance Technician to join our team at our facility located in Houston, TX, 77075. The Facilities Maintenance Technician performs routine building maintenance tasks in one or more fields (e.g. carpentry, electrical, and plumbing). Current Schedule: Monday-Friday 6:00am-2:30pm, OT as needed Position Summary A Facilities Maintenance Technician is responsible for the operation, maintenance, and repair of various systems and equipment within a facility. This includes HVAC systems, plumbing, electrical systems, and general building maintenance. They perform routine inspections, troubleshoot issues, and make necessary repairs to ensure the facility is operating efficiently and safely. Additionally, they may assist with the installation of new equipment, coordinate with external contractors, and maintain inventory of supplies and equipment needed for maintenance tasks. Strong technical skills, attention to detail, and the ability to work independently are essential for this role. Essential Responsibilities Performs routine building maintenance tasks in one or more fields (e.g. carpentry, electrical, and plumbing)Repair small plumbing issuesLighting repairsSheetrock and painting for office; make readyAssists maintenance technicians and other workers Minimum Qualifications High school diploma or GED2-4 years of experience in a facilities maintenance group Skills, Abilities & Other Requirements Ability to use shop equipment: such as sanders, drill press, forklift, and scissor liftAbility to perform new electrical installation for industrial equipment and repair existing electrical in an industrial settingAbility to work safely by following policies and procedures in an industrial environmentEffective communications skills are required; Must have a basic command of the English language, both written and verbalAble to work alone and in a team environment Working & Environmental Conditions Working Conditions Temperature controlled warehouse and manufacturing plant, outside activities are required will be exposed to hot & cold weather climate conditionsThis position may be required to work Physical Requirements Maintaining body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairsBending the body at the waist, the legs at the knees, and extending arms and hands in any direction in a repetitive mannerStanding and walking for long periods of time, up to an entire shiftAbility to bend and lift heavy materials 60+ lbs. repeatedly throughout a single workdayTyping, punching or applying pressure to an object with fingers and palm More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. *Posted position does not provide visa sponsorship or relocation. #LI-KC1 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Join the fastest growing outpatient radiology practice in the Nation- SimonMed Imaging! Our commitment to excellence and improving patient care paired with the best-in-class technology allows us to be an industry leader in the constantly evolving health care environment. Secure your spot now and take advantage of a unique career opportunity to advance your skills while working alongside a dedicated team of board-certified subspecialty radiologists. We can’t wait to meet you! Texas Market Travel % (if applicable): Travel role- 1 market. As an HVAC Technician, you will inspect and perform preventive maintenance and repairs on refrigeration systems and associated equipment, you will be mobile and use multiple trade skills tolead effective, efficient, and timely HVAC support in your assigned territory. Technicians should feel comfortable triaging HVAC needs but should also prioritize proper maintenance to reduce emergent needs. Can read electrical schematics. • Communicates clearly and effectively with coworkers and managers. • Has previous experience in both refrigeration and HVAC service. • Is self-motivated and can work both independently and as part of a team. Join a skilled team that guides and supports you as you become familiar with your new role and supplies the necessary training and tools to be successful. Technician will carpool with another technician with a possibility of own vehicle. ESSENTIAL FUNCTIONS: Complete thorough Preventative Maintenance Checks and Service on all standard package and split unit HVAC systems that are common among commercial buildings (in this case healthcare clinics) including but not limited to: inspection and repair/replacement of belts and pulleys, inspection and cleaning of condensate drain lines, testing power/performance of compressor, fan motor, blower motor, testing function and safety of burners/heat exchangers, function of all safety and operational controls.General repairs of steam/hot water boiler systems. Diagnose airflow and ducting repairs.Safe, efficient, and EPA compliant use of refrigerants in support of standard package and split unit HVAC systems that are common among light commercial customers.Safely diagnose and repair common mechanical, electrical, or system failure issues on standard boiler, package and split unit HVAC systems that are common among light commercial customers, including but not limited to: belts, pulleys, compressors, condensing units, circuity boards, contactors, leaks, safely un-sweating and brazing of copper components.A minimum of five (5) years of HVAC experience in an industrial or hospital setting is preferred.Complete preventative maintenance and repairs per work order requirements. Self performs the following duties in compliance with company procedures, regulatory requirements and safety standards.Complete service inspections and asset inspections as needed.Obtains necessary materials and supplies to complete all tasks.Creates a positive climate with the SimonMed managers and staff by timely and clear communication on projects, triaging, etc.Obtains and completes required safety and compliance training.Provides estimates for larger projects and services needed for onsite customers.Demonstrates competency in the performance of job-related skills appropriate to his/her customer populations and departmental services while providing excellent customer service.Utilizes and operates equipment and mechanical devices which provide for a functional, effective, and safe environment.Adheres to policies, procedures, guidelines relative to departmental operations.On call would vary based on business needs for emergencies only. Physical Requirements: Typical physical demands require full body motion including ability to perform work while bending, stooping, stretching and climbing ladders.Requires dexterity and strength sufficient to operate required tools and machinery; typically required to lift and carry machinery and/or equipment weighing 25 to 100 lbs. and/or assist with lifting weights exceeding 100 lbs.Requires color acuity sufficient to distinguish color-coded signage and systems. OTHER DUTIES:Please note this job description is not designed to cover or contain a comprehensive listing of all activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. BENEFITS: Your health, happiness and future matters! At SimonMed Imaging, we offer medical, vision and dental insurance, 401(k) eligibility, paid holidays plus PTO, Sick Time, opportunity for growth, and much more! MINIMUM QUALIFICATIONS: Education: HS diploma required.Trade school in HVAC preferred. License/Certification: RSI or comparable HVAV trainingUp to date EPA card to handle refrigerant.Valid driver license and decent driving background Experience: Minimum 3 years HVAC experience required. Excellent communication skills especially around timelines Experience obtaining quotes and making recommendations on project needs. Proven ability to be organized while quickly and efficiently problem solving. PHYSICAL DEMANDS: This position may require duties including lifting and carrying up to 50 pounds, sitting for prolonged periods of time, with frequent standing and walking. DRESS ATTIRE:Business Casual- jeans and company polo We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Employment is contingent upon successful completion of drug and background screening. Some positions will require a favorable driving record.

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.Expected salary range of $144,900 to $161,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). PRIMARY PURPOSE OF POSITIONPerforms advanced engineering problem solving in support of power plant operations. Responsible for technical decisions. Possesses superior knowledge in functional discipline and its practical application and has excellent knowledge of applicable industry codes and regulations. Functions with recognized industry-level of expertise in a technical area.PRIMARY DUTIES AND ACCOUNTABILITIESProvides source of technical expertise, guidance, and support for Plant Instrumentation and Controls Systems in the Constellation Power generation fleet. Assures superior engineering support is provided. Drives continuous improvement with respect to engineering activities related to safety, equipment reliability, production, and cost.Strong knowledge of controls, electrical, and I&C engineering including DCS, PLC, and other industrial control system design elements. Prior experience at power generation stations is highly desirable.Ovation, MarkVIe, Allen Bradley and/or T3000 experienceAbility to design and analyze a variety of controls systems, control schemes, and perform tuning of plant process systems.Practical understanding of mechanical, electrical, hydraulic and pneumatic systems with an emphasis on boiler, steam/gas turbine controls is highly desirable.Ability to work on cross-functional teams on minor and major projects. Prepare capital project justification, required work scope, specifications, technical oversight and acceptance testing.Demonstrated ability to provide system/equipment troubleshooting and root cause analysis investigation experience is highly preferred.Interface with the Original Equipment Manufacturers (OEM) and aftermarket vendors in support of required tasks.Implements standards, programs, processes and best practices in support of the Constellation fleet.Available for rotating shift work and overtime as required to meet normal task deadlines, projects, outages, and emergent support needsMINIMUM QUALIFICATIONSBS Engineering, AND10+ years professional experience with exceptional performance.Approval of VP Engineering required to obtain this classification PREFERRED QUALIFICATIONS

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaid vacation/holidays/sicktime-15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care -Available day oneEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCompany vehicleCheck us out! :https://youtu.be/pdZMNrDJviYWhat you will doUnder specific direction is responsible for the sale of Johnson Controls service offerings to owners, primarily at the Director level. Promote the Johnson Controls value proposition to building owners by providing technical solutions and operational expertise. Builds and manages long term customer relationships/partnerships with target and managed accounts. Responsible for customer satisfaction. Positions renewable service agreements as the foundation of managed account relationships. Performs the sales process to cultivate and manage long-term relationships and seeking out, qualifying and closing new sales opportunities. Obtain and close sales on a monthly basis. Seeks to expand the depth and breadth of Johnson Controls offerings within an account. How you will do itWith direction from the supervising manager, sells the Johnson Controls offerings persuasively, persistently and confidently to building owners at the D-level while reaching optimal profit levels.Focuses on improving the existing building to allow the building owner to achieve business objectives. Manages ongoing, opportunities particularly focusing on selling services and retrofits.Sells, renews and expands renewable service agreements, including multi-year agreements, to both new and existing customers.Builds partnering relationships with the owner or owner representatives responsible for the decision-making process to drive the sale of Johnson Controls service offerings. Actively listens, probes and identifies concerns. Understands the customer's business and speaks their language. What we look forRequiredBachelor’s degree in business, engineering, or related team required.A minimum of six (6) years of progressive field sales experience.At least one year successfully selling HVAC or building automation system service or projects.Demonstrates a commitment to integrity and quality in business.Excellent initiative and interpersonal communications skills.Demonstrated ability to influence account decision makers at key levels.HVAC Account Owner Sales Exec JD Build your best future with the ...

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it’s what keeps us at the top of our game.We are solutions-based.We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it’s our people’s too:Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what’s best. Stop and think: how wouldYOUput our drinks on every table Position Description The Maintenance Manager is responsible for providing leadership for the maintenance functions, ensuring proper preventive maintenance of physical plant and all operating equipment, electrical troubleshooting, minimizing equipment downtime to provide maximum production capacity, and compliance with all Occupational Health and Safety regulations. Essential Functions Continuously improving manufacturing processes in terms of quality and performance measurements, and identifying and eliminating bottleneck areas.Seek to ensure reliability of plant and equipment operation while optimizing maintenance and operation costs and satisfying all safety, environmental etc. regulations in the process.Design, document, troubleshoot and lead the launch of new products and processes from an engineering perspectiveIdentify and solve safety concerns encountered during design and study of manufacturing processesDevise hands on improvement processes to reduce scrap and defects while improving throughput and document SOPs and the implementation of Best Practices into the facility. Coordinate the installation of new equipment to maximize production efficiency and maintainability.Work with production to make modifications to equipment and work areas for maximum efficiency of operationMaintain a knowledge base in the capacity of existing utilities and the current level of utilization.Stay abreast of the latest safety, environmental and other regulations which affect the facility to ensure compliance.Develop and support the capital project planning and manage installation projects.Oversee the maintenance of the equipment and the facility to ensure the company receives maximum utilization of its assets.Ensure that systems are in place & followed to maintain reliability of the equipment & processes.Keep written documentation of environmental compliance current.Periodically prepare reports to satisfy environmental and safety regulations and ensure a safe and professional work environment.Reviews, evaluates, counsels, disciplines and discharges employees as necessary to ensure department meets or exceeds productivity requirements.Evaluates and recommends improvements to product manufacturability.Responsible to adhere to food quality and food safety as per quality standards and/or Safe Quality Food requirements.Ensure compliance to all OHSA and environmental regulatory and corporate standards. Investigate and identify root causes of any non-compliance.Accountable for a safe working environment through the development of strategies focused on accident reduction as well as energy and waste minimization.Oversee effective deployment of human resources throughout the plant and ensure the correct administration of the collective Bargaining Agreement. Requirements Education & Experience: Undergraduate Degree (or equivalent experience) plus eight (8) years of experience in a high speed manufacturing environment with a mechanical/electrical background required.Previous preventative maintenance programs experience required.Strong leadership capabilities in a fast-paced production environment required.Previous experience in the food/beverage manufacturing industry preferred. Position-Specific Skills: Proficient in Microsoft Office (Windows, Excel, & Outlook) with the ability to learn new applications as required. SAP experience is highly preferred.An understanding of Safe Quality Food (SQF), responsibility for Food Safety /Food Quality and the responsibility to take action when notified or becomes aware of any Food Safety or Food Quality issue.Must be flexible to work alternate shifts if production needs allow. Physical Demands: Physical - Continuously standing or walking. Regular requirements to lift/handle/carry material or equipment of moderate weight.Visual/Sensory - This position requires regular need to give moderate attention with one or two senses at a time.Work environment - Work and environment are very repetitive.Climate - This position requires the incumbent to have the ability to work in ambient hot and/or cold seasonal environments. A Career with Refresco Refresco is passionate about empowering leaders who reflect our core values and live by our leadership behaviors. These behaviors encourage effective leadership within the business, and focus on leading courageously, empowering individuals, and driving company growth as one team. Joining our team as a people manager means you’ll be encouraged to evolve as a leader who prioritizes the success of both you and your team, to deliver results, whilst bringing your authentic self to work. Refresco offers a competitive salary and comprehensive benefits, which include: Medical/dental/vision insuranceLife insurance401(k) savings plan with company matchPaid holidays and vacationWell-being benefitsDiscount programs Join Refresco TODAYand enjoy a rewarding CAREER! Any employment agency, person, or entity that submits a rsum to this career site or a hiring manager does so with the understanding that the applicant's rsum will become the property of Refresco Beverages, Inc. Refresco Beverages, Inc. will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity. Employment agencies that have agreements with Refresco Beverages, Inc., and have been engaged in a search shall submit rsum to the designated Refresco recruiter or, upon authorization, submit rsum to this career site to be eligible for placement fees.Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Overview: ** HIRING NOW **Seeking experienced Automotive Mechanics / Automotive TechniciansPay: $30.00 - $45.00 flag rateSun Auto Tire & Serviceoperates multiple locations across Texas and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The Master Technician / Automotive Mechanic ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Sun Auto Tire & Service standards.Benefits:Competitive Bi-Weekly PayTuition ReimbursementPaid Vacation and Sick Time6 Paid HolidaysMedical, Dental and Vision InsuranceLife Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Diagnoses vehicles according to the appropriate level of certifications/experience.Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy.Performs complex and heavy-duty repairs.Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers.Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file.Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager.Maintains appropriate ASE certifications and renewals of expiring certifications.Qualifications:Minimum of 5 years of automotive technician / mechanic experienceMust be able to demonstrate the ability to properly use computerized equipment for diagnostics.Possess valid/current driver’s licenseCurrent ASE’s preferredMust be at least 18 years oldAbility to work a minimum of five days, including SaturdaysWorking Conditions and Physical Demands:The Master Automotive Technician / Mechanic will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside.The Master Automotive Technician / Mechanic must be able to meet the following physical requirements:Stand five hours per day and able to walk to gain access to various areas of the buildingBend, stoop, kneel and crouch regularly up to 10 hours per day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequentlyLift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently.Hear and speakVision sufficient to detect color, depth, and re-focusReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Company Name: ARS-Rescue Rooter Overview: Pay: $80-120k (Performance Pay Based)Earning potential over $100K/year based on performanceSchedule: FT-Weekend AvailibiltyFull-time, year-round workJoin ARS, the nation’s largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience.What We Offer:Insurance available after 31 daysLow-cost medical (as low as $5/week)Dental, vision, HSA/FSA401(k) with company match13 days PTO + 8 paid holidaysCompany-paid life insuranceTake-home vehicle + gas cardUniforms + cleaning serviceWeekly direct deposit Responsibilities: Troubleshoot, service, and repair residential HVAC systems with the support of full training, professional tools, and a strong leadership network. Qualifications: What You Need:3 years of residential HVAC Service experience is required.EPA certification (or ability to obtain)Valid driver’s license & clean driving recordMust pass background and drug screeningAbility to enter attics, crawlspaces, and lifting heavy equipmentIf you have the experience we seek, APPLY NOWNote: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Position SummaryA Senior Quality Inspector is responsible for ensuring that products or services meet established quality standards and specifications. They perform visual, mechanical and electrical inspections, tests, and audits to identify any defects or deviations from quality requirements. Senior Quality Inspectors use various tools and techniques to measure and evaluate the quality of materials, components, and finished products. They document and report any non-conformities and work closely with production teams to address quality issues and implement corrective actions. Additionally, they may participate in the development and improvement of quality control processes and procedures. Senior Inspectors will train and lead a small team of inspectors. Essential Responsibilities•Perform visual, mechanical and electrical inspections, and testing of all equipment manufactured at Powell facilities according to Powell Standards.•Program and operate electronic equipment such as microprocessor-based relays, PLCs, HMIs, etc.•Energize Powell electrical products and other buyout equipment such as service Panels, HVAC, Battery Chargers, UPS System, etc.•Perform equipment failure investigations and root cause analysis.•Responsible for performing all aspects of inspection activities with minimum supervision.•Complete and maintain all test Quality Control documentation as required.•Perform maintenance on test equipment as needed.•Perform tests using equipment such as multi meter, clamp-on-meter, voltage detector, Hi-Pot, etc.•Interaction with all departments (shop, engineering, sales, shipping, fabrication, PCR, switchgear) including customers to work to resolve quality related issues.•Interaction with all departments during production, final inspection and final release to shipping is required.•External relationships may include regular interaction with other Powell subsidiaries, suppliers and customers.•Participating in coordinating with customers and Project Managers for the performance of Factory Acceptance Testing.•Record Engineering and Shop discrepancies, non-conformities and material shortages utilizing Powell systems.•Participates in continuous improvement projects.•Promote a safety culture as well as attend all safety meetings.•Ensure quality by following standard work instructions and identifying any potential risks to product quality.•Ensure that work areas remain clean and well organized. Minimum Qualifications•High School Diploma or General Education Diploma, or a Trade School diploma or certificate•Minimum 3-5 years of experience in quality inspection of electrical equipment.•Ability to read prints including specification sheets, wiring diagrams, schematics, three-line drawings, wiring lists and part drawings.•Must understand basic electrical principals and relevant Mechanical experience.• Intermediate experience working with industry codes and standards and able to refer to applicable codes. Skills, Abilities & Other Requirements•Ability to lead and train quality inspectors•Ability to apply industry standards as applicable to job and product.•Actively seeks out self-development through internal or external programs that contributes to knowledge, skill and abilities.•Demonstrates integrity and ethical decision making.•Conscientious, thorough, accurate, and reliable when performing and completing job tasks.•Able to work effectively within a team and around other departments and their activities.•Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements.•Must be proficient in the English language, both written and verbal. Working & Environmental Conditions Working Conditions •Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities.•Required to always wear personnel protective equipment (i.e., hard hats, safety glasses, hearing protection, safety harnesses and respirators) when required.•Working at a desk and computer in an office environment is required.•Must be able to work from all types of ladders (step ladders, "A" frame ladders and all size extension ladders) and scaffolding.•Working at heights usually no higher than 30 feet in the air or using proper lift equipment. Physical Requirements •Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs.•Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction in a repetitive manner continuously.•Continuous standing, walking 50–300-foot distances for long periods of time with only occasional sitting.•Must be able to climb stairs frequently throughout the shift.•Able to frequently look over shoulders, work with both arms above shoulders and use both arms at full length frequently.•Using upper extremities to apply or exert a force continuously up to 50lbs.•Ability to use hand tools such as tin snips, hammer, and power tools (some vibrating), for long periods of time with frequent repetition. More InformationThis job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Company Name: ARS-Rescue Rooter Overview: Pay: $80-120k (Performance Pay Based)Earning potential over $100K/year based on performanceSchedule: FT-Weekend AvailibiltyFull-time, year-round workJoin ARS, the nation’s largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience.What We Offer:Insurance available after 31 daysLow-cost medical (as low as $5/week)Dental, vision, HSA/FSA401(k) with company match13 days PTO + 8 paid holidaysCompany-paid life insuranceTake-home vehicle + gas cardUniforms + cleaning serviceWeekly direct deposit Responsibilities: Troubleshoot, service, and repair residential HVAC systems with the support of full training, professional tools, and a strong leadership network. Qualifications: What You Need:3 years of residential HVAC Service experience is required.EPA certification (or ability to obtain)Valid driver’s license & clean driving recordMust pass background and drug screeningAbility to enter attics, crawlspaces, and lifting heavy equipmentIf you have the experience we seek, APPLY NOWNote: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Powell is a manufacturer of switchgear and other electrical equipment. We are seeking a Quality Inspector for our location in Southeast Houston! Four 10s schedule: Monday-Thursday 6:00am-4:30pm A Quality Inspector is responsible for ensuring that products or services meet established quality standards and specifications. They perform visual, mechanical and electrical inspections, tests, and audits to identify any defects or deviations from quality requirements. Quality Inspectors use various tools and techniques to measure and evaluate the quality of materials, components, and finished products. They document and report any non-conformities and work closely with production teams to address quality issues and implement corrective actions. Additionally, they may participate in the development and improvement of quality control processes and procedures. Essential Responsibilities Learn and be able to perform internal and customer factory acceptance testing to include visual, mechanical and electrical inspections, and testing of all equipment manufactured at Powell facilities according to Powell Standards.Perform tests using equipment such as multimeter, clamp-on-meter, voltage detector, Hi-Pot, etc.Program and operate electronic equipment such as microprocessor-based relays.Energize Powell electrical products and other buyout equipment such as service Panels, HVAC, Battery Chargers, UPS System, etc.Perform equipment failure investigations and root cause analysis.Complete and maintain all test Quality Control documentation as required.Perform maintenance on test equipment as needed.Interaction with all departments (sales, engineering, production control, fabrication, PCR, switchgear, shipping) including customers to work to resolve quality related issues.Interaction with all departments during production, final inspection and final release to shipping is required.External relationships may include regular interaction with other Powell subsidiaries, suppliers and customers.Record Engineering and Shop discrepancies, non-conformities and material shortages utilizing Powell systems.Participates in continuous improvement projects.Promote a safety culture as well as attend all safety meetings.Ensure Powell employees, suppliers and customers adhere to safety rules and PPE requirements.Ensure quality by following standard work instructions and identifying any potential risks to product quality.Ensure that work areas remain clean and well organized.Learn and understand basic electrical principles and relevant Mechanical experience. Minimum Qualifications High School Diploma or General Education Diploma, or a Trade School diploma or certificateMinimum 1-3 years’ experience in manufacturing environment.Ability to read engineering documentation and drawings including specification sheets, wiring diagrams, schematics, three-line drawings, wiring lists and part drawings. Preferred Qualifications Experience in Quality inspection for electrical or electronic equipment or components preferredBasic experience working with industry codes and standards and able to refer to applicable codes. Skills, Abilities & Other Requirements Ability to apply industry standards as applicable to job and product.Able to read and interpret electrical symbols, characters, and drawings.Able to apply product knowledge and technical skills to aid in problem solving.Basic computer skills using Oracle, Word, Excel and Access.Develop the ability to answer technical questions from shop, inspectors, and customers.Ability to interact on a regular basis with shop, inspection, engineering, sales and shipping personnel.Actively seeks out self-development through internal or external programs that contributes to knowledge, skill and abilities.Demonstrates integrity and ethical decision making.Conscientious, thorough, accurate, and reliable when performing and completing job tasks.Able to work effectively within a team and around other departments and their activities.Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements.Must be proficient in the English language, both written and verbal. Working & Environmental Conditions Working Conditions Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities.Required to always wear personnel protective equipment (i.e., hard hats, safety glasses, hearing protection, safety harnesses and respirators) when required.Working at a desk and computer in an office environment is required.Must be able to work from all types of ladders (step ladders, "A" frame ladders and all size extension ladders) and scaffolding.Working at heights usually no higher than 30 feet in the air or using proper lift equipment. Physical Requirements Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs.Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction in a repetitive manner continuously.Continuous standing, walking 50–300-foot distances for long periods of time with only occasional sitting.Must be able to climb stairs frequently throughout the shift.Able to frequently look over shoulders, work with both arms above shoulders and use both arms at full length frequently.Using upper extremities to apply or exert a force continuously up to 50lbs.Ability to use hand tools such as tin snips, hammer, and power tools (some vibrating), for long periods of time with frequent repetition. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. *Posted position does not provide visa sponsorship or relocation. #LI-KC1 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Powell is an engineer to order manufacturer of switchgear. We are seeking an experienced Senior Industrial Maintenance Technician to join our team at our facility located in Houston, TX, 77075. Schedule: Monday-Thursday 6:00am-2:30pm plus OT Position Summary As a Maintenance Technician, you will be responsible for learning how to diagnosis, troubleshoot, and repair of all facets of the manufacturing facility. The person in this role must be self-driven to perform preventative maintenance and continual improvements. The Maintenance Technician will perform routine and preventative maintenance and repair manufacturing and fabrication equipment, including CNC Laser Cutting and CNC Turret Punch Press equipment, Robotic Welding equipment, Automated Material Handling equipment, and Automated Powder Coat Painting equipment. Essential Responsibilities Reading assembly drawings, schematics, and equipment layouts.Maintaining, diagnosing, troubleshooting, and repairing electrical circuits. (occasional)Maintaining, diagnosing, troubleshooting, and replacing control devices.Maintaining, diagnosing, troubleshooting, and replacing hydraulic equipment, circuits and components.Maintaining, diagnosing, troubleshooting, and replacing pneumatic systems.Must be able to look up parts from equipment drawings, schematics and parts lists.Must be able to understand our Computerized Maintenance Management System (CMMS) and be able to conform to our work order procedures.Adhering to all plant safety and environmental guidelines, policies and procedures.Requires working with a wide variety of other job groups and involves working around traffic, heights, electricity, hydraulics, and heavy equipment including moving parts.Assisting crew members and working in a team environment. Minimum Qualifications High School Diploma or General Education Diploma; associate degree in electrical technology preferred.Minimum of 3-4 years of experience in an Industrial Maintenance role. Skills, Abilities & Other Requirements Must be able to efficiently and effectively use a computer, CMMS and related software related to record-keeping and machine troubleshooting/maintenance.Strong mathematical ability is essential.Must be self-driven and able to drive organizational change.Must work well in a team environment.Must be willing to learn and perform with minimal direction.Must have mechanical and electrical knowledge.Must have basic computer skills: Microsoft SuiteMust be fluent in English with good written and verbal communication skills.Must have manual dexterity.Ability of strong mechanical aptitude.Ability to read mechanical and electrical schematics.Ability to troubleshoot and repair low voltage (12 v DC) – high voltage (480 v AC 3 Phase) electrical systems.Ability to visually and mentally make priority decisions and independent judgment calls based on the situation at hand.Ability to work long hours and weekends.Ability to operate hand and power tools, industrial machines, digital cameras, phones, scanners, tools, and controls in a safe manner.Ability to work and concentrate in a noisy environment. Working & Environmental Conditions Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities.Required to wear personal protective equipment (PPE) (i.e., safety shoes, hard hats, bump caps, safety glasses, hearing protection, safety harnesses as required) and respirators when required.Must be able to work from all types of ladders (step ladders, "A" frame ladders, etc.)Specific vision abilities required include close vision, distance vision, color perception, peripheral vision, depth perception, and ability to adjust focus, hand-eye coordination.Working at heights usually no higher than 20 feet in the air on an elevated structure using proper lift equipment and Fall Protection Equipment.Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs or step ladders.Bending the body at the waist, the legs at the knees, and extending arms and hands in any directionContinuous standing and walkingAble to use upper extremities frequently, work with both arms above shoulders and use both arms at full length frequently.Must be able to meet physical lifting demand up to 50lbs.Frequent use of hand tools and power tools. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. *Posted position does not provide visa sponsorship or relocation. #LI-KC1 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Powell is an engineer to order manufacturer of switchgear. We are seeking an experienced Industrial Maintenance Technician to join our team. The Maintenance Technician will perform routine and preventative maintenance and repair manufacturing and fabrication equipment, including CNC Laser Cutting and CNC Turret Punch Press equipment, Robotic Welding equipment, Automated Material Handling equipment, and Automated Powder Coat Painting equipment. 3rd Shift Schedule: Monday-Friday 10:00pm-6:15am plus OT Essential Responsibilities Reading assembly drawings, schematics, and equipment layouts.Maintaining, diagnosing, troubleshooting, and repairing electrical circuits. (occasional)Maintaining, diagnosing, troubleshooting, and replacing control devices.Maintaining, diagnosing, troubleshooting, and replacing hydraulic equipment, circuits and components.Maintaining, diagnosing, troubleshooting, and replacing pneumatic systems.Must be able to look up parts from equipment drawings, schematics and parts lists.Must be able to understand our Computerized Maintenance Management System (CMMS) and be able to conform to our work order procedures.Adhering to all plant safety and environmental guidelines, policies and procedures.Requires working with a wide variety of other job groups and involves working around traffic, heights, electricity, hydraulics, and heavy equipment including moving parts.Assisting crew members and working in a team environment. Minimum Qualifications Required Experience is Proportionate with the selected job level: The Industrial Maintenance Tech level 1 High School Diploma or General Education Diploma; associate degree in electrical technology preferred.Minimum of 1-2 years of experience in an industrial maintenance roleThe Senior Industrial Maintenance Tech High School Diploma or General Education Diploma; associate degree in electrical technology preferred.Minimum of -3-4 years of experience in an industrial maintenance role Skills, Abilities & Other Requirements Must be able to efficiently and effectively use a computer, CMMS and related software related to record-keeping and machine troubleshooting/maintenance.Strong mathematical ability is essential.Must be self-driven and able to drive organizational change.Must work well in a team environment.Must be willing to learn and perform with minimal direction.Must have mechanical and electrical knowledge.Must have basic computer skills: Microsoft SuiteMust be fluent in English with good written and verbal communication skills.Must have manual dexterity.Ability of strong mechanical aptitude.Ability to read mechanical and electrical schematics.Ability to troubleshoot and repair low voltage (12 v DC) – high voltage (480 v AC 3 Phase) electrical systems.Ability to visually and mentally make priority decisions and independent judgment calls based on the situation at hand.Ability to work long hours and weekends.Ability to operate hand and power tools, industrial machines, digital cameras, phones, scanners, tools, and controls in a safe manner.Ability to work and concentrate in a noisy environment. Working & Environmental Conditions Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities.Required to wear personal protective equipment (PPE) (i.e., safety shoes, hard hats, bump caps, safety glasses, hearing protection, safety harnesses as required) and respirators when required.Must be able to work from all types of ladders (step ladders, "A" frame ladders, etc.)Specific vision abilities required include close vision, distance vision, color perception, peripheral vision, depth perception, and ability to adjust focus, hand-eye coordination.Working at heights usually no higher than 20 feet in the air on an elevated structure using proper lift equipment and Fall Protection Equipment.Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs or step ladders.Bending the body at the waist, the legs at the knees, and extending arms and hands in any directionContinuous standing and walkingAble to use upper extremities frequently, work with both arms above shoulders and use both arms at full length frequently.Must be able to meet physical lifting demand up to 50lbs.Frequent use of hand tools and power tools More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. *Posted position does not provide visa sponsorship or relocation. #LI-KC1 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Purpose of Position We are looking for a hands-on machinist to help build prototype parts in our lab. This person will run manual machines (like lathes and mills), operate a CNC brake press, a CNC laser cutter, and help manage inventory for common stock materials such as metal bars, plates, and sheet stock. The role supports engineers by making parts quickly and keeping materials organized for ongoing projects. Sponsorship and relocation support is not provided.Key Responsibilities Use manual lathe and mill to cut and shape parts.Set up and run CNC brake press to bend sheet metal.Operate CNC laser to cut parts from metal and plastic sheets.Read and follow engineering drawings and basic instructions.Measure and inspect parts using tools like calipers and micrometers.Help improve part designs to make them easier to machine or bend.Track and organize common stock materials (metal, plastic, sheet, and bar).Label materials and keep storage areas clean and orderly.Follow all lab safety rules and wear proper protective gear. Skills and Responsibilities 5+ years of experience with manual machining and brake press operation.Comfortable reading drawings from engineer and using measuring tools.Knowledge of metal and plastic stock types.Good organization skills for managing inventory.Able to work on short deadlines and switch between tasks.Works well with others and follows safety procedures. Working Conditions The employee typically performs duties in a normal office environment. There may be some work in a manufacturing environment and exposure to the elements of our factory. Additionally, there may be some work performed in the field with exposure to construction sites or active customer facilities. It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs, and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. Physical Requirements The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Regularly required to use hands to touch, hold, handle, or feel.Frequently required to stand; walk; sit; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hearMust occasionally lift and/or move up to 65 poundsMaintaining body equilibrium and agility to prevent falling when walking, standing, crouching, ascending, or descending stairs #LI-CAB In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Powell Service Division is looking for a highly skilled and motivated Senior Service Technician interested in joining one of the nation’s leading providers of medium and low voltage switchgear. Powell Service Technicians are responsible for ensuring the end to end safety, quality and performance of Powell equipment across the US and Canada. This includes performing installations, preventative maintenance, corrective maintenance, and periodic supervision of small crews. The ideal candidate thinks critically, can work well independently, and is a problem solver. Senior service technicians are expected to service the west coast, gulf coast south, offshore and east coast service regions. Qualified Service Technicians are provided safety and technical training with full office support. Once qualified, Technicians are assigned a company vehicle, standard tooling, testing equipment, a laptop, smart phone, and company expense card.Essential Responsibilities Adhere to Powell’s current safety and quality standardsComplete all site documentation in a timely manner; including but not limited to, weekly time sheets, signed service and repair order, materials used and report writing.Provide regular and clear communication regarding work schedule to Field Operations Scheduler and District Service ManagerMaintain flexible work hours, which will include over time and periodic weekend supportMust be available to travel up to 85% of the year.Comply with Powell‘s standard operating procedures, documentation processes, safety processes and protocols.Coordinate with Powell Project management, customers, vendors, and labor support in a professional and customer-centric mannerAble to work in different roles from supporting the Manufacturing Department within house fabrication, to overseeing small crews on installation projects.Switchgear and PCR installationsDC / AC SwitchgearPerform performance testing on Powell equipment and components, including but not limited to; insulation testing (megger testing), Ductor, Hi Potential testing, torque tests and mechanical / functional testing.Perform regular inspections of any issued vehicle or calibrated equipment/tools.Provide support to services manufacturing group. May consist of construction, installation, wiring and testing.Duties will include local and domestic travel, PCR installation, switchgear installation, PowlVac breakers, also trouble shooting, testing and repair of mentioned items. Minimum Qualifications Field service technicians are required to have 4 years as a shop and / or field electrical / breaker technician.Exhibit basic knowledge of Electrical Industry manufacturing standards. Specific standards include sections of ANSI IEEE C37 applicable to the design and manufacture of breakers and switchgear.Basic knowledge of the following: ANSI IEEE device function numbers; ampacities of electrical conductors in switchgear applicationsBasic knowledge of electrical air and surface creepage clearance requirements.Basic knowledge in writing accurate and complete test reports, project summaries and has the ability to explain basic anomalies found on a given project. Preferred Qualifications Basic familiarity with contactor and circuit breaker schematics (Preferred).Basic understanding of hi potential testing (Preferred)Basic understanding of low resistance testing (Preferred).Basic working knowledge of mechanical and electrical functional testing of circuit breakers and electrical switchgear (Preferred).NICET Level 1 certification (Preferred).HUET / Offshore Survival Training (Will be provided if the candidate is not currently certified).NFPA 70E Trained (Preferred / Training can be provided).OSHA 10 / 30 Trained (Preferred / Training can be provided) Skills, Abilities & Other Requirements Demonstrate basic knowledge in the design and manufacture of bus and structural modification projects.Demonstrate knowledge of basic electrical theory and control circuits i.e.: Ohm's Law; Basic AC and DC theory.Ability to assist other senior level technicians with maintenance, repair, installation, upgrades and retro fills on Powell switchgear and power control rooms Working & Environmental Conditions Working Environment The Field Service Technician typically performs duties in an industrial environment. This position requires services both locally and across the Continental US. It is the policy of Powell Service Division to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand, talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. Additional requirements are as follows: Medium physical effort (lifting/moving up to 50 pounds)Have full range of mobility in upper and lower body and be able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling and squatting for extended periods of time.Work at heights greater than 10’.Work on ladders of all types.Work on scissors and bucket lifts (on occasion). In addition, employees will be required to complete and pass Company and Customer required drug screening, background and employment verification checks, maintaining eligibility throughout employment. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. #LI-BH3 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .