Daily Thermetrics is looking for reliable, safety-minded Field Service Technicians to join our rapidly expanding field services team. In this role, you will support the onsite installation of Daily Thermetrics’ industry-leading thermometry products at refinery and chemical plant locations. You will work under the direction of a Field Supervisor, who will assign and oversee your daily tasks.
Job Duties Include: Assist with the installation of thermometry systems, following direction from the Field Supervisor. Use power tools and hand tools (e.g., grinders, drills, etc.) in accordance with safety protocols. Perform basic electrical wiring, rigging, and general labor as needed. Safely work in confined spaces and at elevated heights. Maintain accurate and timely field documentation and project paperwork. Interpret and work from technical drawings and schematics. Comply with all onsite safety procedures and company guidelines. Perform other duties as assigned to support project success.
Benefits: 100% Company paid Employee Only HDHP Medical. 100% Company paid Life Insurance. 401K with Employer Match. Medical Plan options available (two medical plans, dependent/family coverage options) Health Savings Account with Employer contribution. Flexible Savings Account. Optional Benefits: Dental, Vision, Supplemental Life Insurance, Disability, Accident plans.
Qualifications: Basic understanding of Temperature Instrumentation; heater tubeskin thermocouples, reactor multipoint temperature sensors, general thermocouples, general thermowells, etc. Strong communication skills and ability to follow direction Team-oriented with a positive attitude and adaptability in dynamic environments Willingness to learn and grow within the company Must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Valid driver’s license Current TWIC (Transportation Worker Identification Credential) Must pass background checks and drug screening (DISA compliance)
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Daily Thermetrics is seeking a skilled and motivated Field Service Technician to join our growing team. In this leadership role, you will oversee onsite installations of our thermometry products in refinery and chemical plant facilities. As the lead technician on-site, you will be responsible for managing day-to-day operations, coordinating with contractors, and ensuring successful project execution.
Job Duties Include: Lead onsite installations of temperature instrumentation systems. Serve as the primary point of contact for Daily Thermetrics at the job site. Oversee daily project activities and timelines, ensuring tasks are completed safely, accurately, and on schedule. Coordinate with clients, contractors, and internal teams to maintain clear communication and alignment. Use hand tools, grinding wheels, electrical wiring equipment, and rigging tools. Perform work at heights and in confined spaces. Strictly follow all safety procedures and job site protocols. Accurately complete and maintain field documentation and project paperwork. Interpret and work from technical drawings and schematics. Perform other related duties as assigned.
Benefits: 100% Company paid Employee Only HDHP Medical. 100% Company paid Life Insurance. 401K with Employer Match. Medical Plan options available (two medical plans, dependent/family coverage options) Health Savings Account with Employer contribution. Flexible Savings Account. Optional Benefits: Dental, Vision, Supplemental Life Insurance, Disability, Accident plans.
Qualifications: Expert understanding of Temperature Instrumentation; heater tubeskin thermocouples, reactor multipoint temperature sensors, general thermocouples, general thermowells, etc. Strong leadership and problem-solving skills Clear and professional communication skills Ability to adapt in dynamic environments and learn quickly Team-oriented mindset with a positive and proactive attitude Must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Valid driver’s license Current TWIC (Transportation Worker Identification Credential) Must pass background checks and drug screening (DISA compliance)
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Daily Instruments is seeking an Assembly Technician to join our rapidly growing manufacturing team. This position is responsible for assembly of thermal-instrumentation products that are used in refinery and chemical plant facilities. Assembly Technicians are responsible for working in a cohesive team environment to produce sub-assemblies, and final products as well as coordinating onsite work with engineering, inspections, machine shop and other production personnel. The successful Assembly Technician will ensure that projects are completed safely, in strict compliance with ISO & QA requirements, and in a timely basis to meet shipping requirements.
This is an Entry-Level, Full-Time, Hourly, Non-Exempt production shop position.
Climate-Controlled facility all year round.
Shifts Available: First Shift: Monday - Friday 5:00 am - 1:30 pm Second Shift: Monday - Friday 1:30 pm - 10:00 pm
OT and weekend hours for both shifts assigned as needed to meet production needs.
Assemblers perform tasks that are necessary to the production process. Assemblers aid in the fabrication, maintenance, and repair of component parts and products Carry out assembly day-to-day work instructions to ensure accurate assembly of products Read and understand safety instructions and ensure all safety rules and procedures are followed Focus on quality control of assembled products Read and understand technical drawings, specifications Performs work by following assembly work instructions, technical specifications, and parts lists; gathering parts, subassemblies, tools, and materials. Cutting, stripping, bending, fastening, and working with hand-held tools Documents actions by completing production/worktime tracking and quality forms. Contributes to team effort by accomplishing related results as needed
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits (including: Dental, Vision, Supplemental Life Insurance, Disability (short-term & long-term), Accident Insurance)
Qualifications: Team Work orientation Dependable and Reliable production orientation Experience working in a manufacturing or fabrication environment preferred Proficient knowledge of measuring equipment such as micrometers, dial indicators, calipers, and scaled rules Working knowledge of hand power tools, and other hand-held tools Able to lift up to 100 pounds Must be legally authorized to work in the US for any employer other than current employer Must be fluent in English, any other language skills are beneficial This position is considered SHOP/INDOOR WORK Additional work hours assigned as need to meet production goals Climate-controlled facility all year round
Daily Instruments has deeply invested in providing a safe and healthy work environment, including on-site cleaning staff, disinfecting air-filtration systems installed in all HVAC systems, office air purifiers, disinfecting lighting in communal areas, company provided COVID supplies (including masks, face/eye protection, hand-sanitizer).   Daily Instruments/Daily Thermetrics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA. Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran.

Daily Thermetrics Corp., a fast-paced manufacturing company based in Houston, TX, is looking for motivated, Entry Level - Field Service Technicians to support the installation of our specialized thermometry products at refinery and chemical plant locations.
This hands-on role is ideal for individuals who are mechanically inclined, safety-conscious, and eager to build a career in industrial field services. The ideal candidate will be a clear communicator with a strong willingness to learn, take direction, and adapt to changing environments. Success in this role also requires a positive, can-do attitude and a commitment to teamwork. Will receive per-diem debit cards, funds will be deposited onto the per-diem card before any assignment.
Job Duties Include: Assist with on-site installation of thermometry systems under the direction of a Daily Thermetrics Field Supervisor Perform tasks using grinding wheels, hand tools, rigging equipment, and electrical wiring Work safely in physically demanding environments, including heights and confined spaces Follow all safety procedures and site-specific guidelines Take on additional duties as assigned to support the team and project success
Qualifications: Must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Valid driver’s license TWIC (Transportation Worker Identification Credential) Must pass background checks and drug screening (DISA compliance)
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Pol-Tex, a division of Poly America L.P. is currently seeking a Training Coordinator to join our team. Poly America produces several lines of plastic products including high quality trash bags and construction films.
Job Duties Include: Training Coordinators at Pol-Tex are responsible for conducting, facilitating, and documenting production training. This position will also have the responsibility of ensuring that all employees have completed the appropriate training for their role. Trainers must be comfortable communicating with individuals at all levels of the organization. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
Pol Tex offers competitive compensation packages including: Medical/Dental Paid vacations and holidays 401(K)
Qualifications The ideal candidate will possess: 2-3 years’ experience training required 2-3 years’ experience in manufacturing training preferred Bilingual with above average communication skills using both Spanish and English is required. Excellent communication skills required The ability to work a night shift or a day shift as assigned by management. Conduct New Hire Training of Production Workers Heavy Equipment Training with Forklifts and other Equipment Work with multiple levels of management to create new training programs and initiatives Additional responsibilities and opportunities as they are assigned by management.

Responsibilities: Forklift Drivers at Pol-Tex are responsible for safe operation of sit-down propane forklifts for the purpose of handling, loading, and unloading product. Drivers at Pol-Tex regularly use RF scanners and inventory control systems to pull orders, keep production lines supplied, and re-stock inventory racks. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.
Pol-Tex offers competitive compensation packages including Medical/Dental, paid vacations, paid holidays and 401(K).
If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Qualifications: One year of recent experience operating forklifts. The ability and desire to work safely. The ability to work a night shift or a day shift. 4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.

If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Pol-Tex offers competitive compensation packages including: Medical Dental Paid vacations Paid holidays 401(K)
Qualifications: The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. The desire to expand knowledge and grow with the company. The ability and desire to work safely. The ability to work a night shift or a day shift.  4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Pol-Tex International, a division of Poly-America, L.P., is currently seeking an Industrial Mechanic to join our maintenance team. Pol-Tex International’s mission is to be the safest and most efficient choice in the polyethylene recovery, recycling, and compounding industries.  Our fleet, facility, and equipment combined with our experienced and dedicated professional staff make Pol-Tex International the premier gathering and recycling center for the Gulf Coast Region. Pol-Tex International offers competitive compensation packages including Medical/Dental, paid vacations and holidays, and 401(K). Responsibilities Industrial Mechanics at Pol-Tex International are responsible for the maintenance, installation, troubleshooting, and modification of new and existing industrial converting equipment. This role will document, recommend, and execute maintenance procedures. The Mechanic will be working in a manufacturing maintenance team. At times they will complete the mechanical testing of electro-mechanical equipment. Tasks include replacing, inspecting and dismantling defective parts, and implementing upgrades and part changeovers. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. A strong desire to be hands on with their work and to follow processes through. The aptitude and desire necessary to be a good student of Pol-Tex processes, equipment, and procedures. Problem solving skills including troubleshooting of mechanical equipment.

Encuentra la Carrera perfecta y disfruta un refrescante cambio en Pol-Tex, division de Poly-America, L.P. Nuestra localidad en el area de Baytown se esta expandiendo y provee una gran oportunidad para trabajar en una industria lider en estabilidad y crecimiento.
Los empleados de produccion en Pol-Tex son responsables por la operacion segura de montacargas de gas para el proposito de manejo de cargar y descargar producto. El puesto de trabajo puede implicar responsabilidades adicionales a medida que se necesiten y/o sean asignadas por el gerente.
Responsabilidades: Operadores de montacargas en Pol-Tex son responsables por la operacion segura de montacargas sentado de gas para el proposito de manejo carga y descarga de producto. Los operadores de montacargas en Pol-Tex regularmente usan escaners RF y sistemas de control de inventario para  sacar ordenes , mantener las lineas de produccion suministradas y re llenar los bastidores de almacenamiento. La posicion puede incluir responsabilidades y oportunidades adicionales segun sean necesarias y/o asignadas por el gerente.
Calificaciones: Seis meses a un ano de experiencia reciente operando montacargas La habilidad y el deseo de trabajar de una manera segura La disponibilidad de trabajar un turno de dia o de noche. 4 dias de trabajo/ 4 dias de descanso, dias rotativos segun sean assignados. Responsabilidades adicionales y oportunidades segun sean asignadas por el gerente.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. 2nd Shift:Tues-Fri 5pm-3:30am.Overtime as needed 5% Shift Differential Responsibilities Include: Operating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: HS Diploma / GED and 2+ years relevant experienceEquipment Experience – Machining experience in a manufacturing or repair environment operating CNC lathes/mills.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives .Health and Safety - Applies elementary concepts to manage and apply safe systems of work. Preferred Experience / Skills: CNC Lathe5 Axis Milling experienceProgramming experience. G-Code Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-15001 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. Must have experience withLine boring on a CNC horizontal boring mill This will be a 2nd shift opportunity; Overtime may be required. Hires are Eligible for a $2500 sign on bonus!!!!! Responsibilities: Operating CNC Machines, Manual Machines, CNC Lathe, VTL, HBMOperating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating CNC Machines, manual lathes, milling machines.HS Diploma / GED and 3-5 years relevant experienceExperience operating LARGE machinesHBM Machine, tooling for Line Boring Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-14270 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will operate a lathe to machine parts and components for flow control valves, including shafts, plugs, seat ring, seat retainers, bodiesetc. The machinist will verify the quality of finished work with precision measurement tools (caliper, micrometer, bore gaugeetc). This is a second Shift position: Monday-Friday 4:00pm – 1:00am, including opportunity to work OT. Sometimes Saturdays and Sundays if the workload requires. There is a 5% shift differential. ** Must have experience with Mazatrol/Programming is a must. Responsibilities & Requirements: Inspect first articles and verify the quality of the finished work by using precision measurement tools and demonstrating an in-depth understanding of specifications and quality workmanship.Meet production goals relating to efficiency, schedules, and scrap/rework.Clean and maintain machines and tools and keep an organized workspace.Apply an understanding of the process flow of documents, materials, and parts through the manufacturing process.Work closely with other machinists to discuss and solve problems relating to repairs and equipment.Collaborate with inventory workers and engineers to status and discuss work-in-progress Preferred Experience / Skills: 5+ Years min experience on CNC machines; able to Mazatrol; Fanuc Control.Experience operating manual mills and lathes is a plus.Expertise required in machining 300-series stainless steel and other materials such as Hastelloy C276, Monel 400, iron nickel and high chrome alloys.Working knowledge of machine tooling and processing requiredSkill required in using and interpreting precision measuring instruments.Strong blueprint reading skills requiredPersonal commitment to quality workmanship, with an ability to assess and explain quality concern to othersAble to accurately and consistently follow detailed procedures in order.An eye for detail to check drawings, part numbers, and materials, and to correctly complete routers and other paperwork.Work collaboratively as part of a team, showing a professional attitude and a service-oriented mindset in a fast-paced, flexible environment.Demonstrated track record of reliable, on-time attendance, able to work overtime and weekends as required.Standing for long times required, repetitive arm motions, frequent lifting of 25 lbs with occasional lifting up to 50 pounds.Must be able to complete math problems quickly and accurately.High School diploma or equivalent. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-13315 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.