Daily Thermetrics is looking for reliable, safety-minded Field Service Technicians to join our rapidly expanding field services team. In this role, you will support the onsite installation of Daily Thermetrics’ industry-leading thermometry products at refinery and chemical plant locations. You will work under the direction of a Field Supervisor, who will assign and oversee your daily tasks.
Job Duties Include: Assist with the installation of thermometry systems, following direction from the Field Supervisor. Use power tools and hand tools (e.g., grinders, drills, etc.) in accordance with safety protocols. Perform basic electrical wiring, rigging, and general labor as needed. Safely work in confined spaces and at elevated heights. Maintain accurate and timely field documentation and project paperwork. Interpret and work from technical drawings and schematics. Comply with all onsite safety procedures and company guidelines. Perform other duties as assigned to support project success.
Benefits: 100% Company paid Employee Only HDHP Medical. 100% Company paid Life Insurance. 401K with Employer Match. Medical Plan options available (two medical plans, dependent/family coverage options) Health Savings Account with Employer contribution. Flexible Savings Account. Optional Benefits: Dental, Vision, Supplemental Life Insurance, Disability, Accident plans.
Qualifications: Basic understanding of Temperature Instrumentation; heater tubeskin thermocouples, reactor multipoint temperature sensors, general thermocouples, general thermowells, etc. Strong communication skills and ability to follow direction Team-oriented with a positive attitude and adaptability in dynamic environments Willingness to learn and grow within the company Must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Valid driver’s license Current TWIC (Transportation Worker Identification Credential) Must pass background checks and drug screening (DISA compliance)
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Daily Thermetrics is seeking a skilled and motivated Field Service Technician to join our growing team. In this leadership role, you will oversee onsite installations of our thermometry products in refinery and chemical plant facilities. As the lead technician on-site, you will be responsible for managing day-to-day operations, coordinating with contractors, and ensuring successful project execution.
Job Duties Include: Lead onsite installations of temperature instrumentation systems. Serve as the primary point of contact for Daily Thermetrics at the job site. Oversee daily project activities and timelines, ensuring tasks are completed safely, accurately, and on schedule. Coordinate with clients, contractors, and internal teams to maintain clear communication and alignment. Use hand tools, grinding wheels, electrical wiring equipment, and rigging tools. Perform work at heights and in confined spaces. Strictly follow all safety procedures and job site protocols. Accurately complete and maintain field documentation and project paperwork. Interpret and work from technical drawings and schematics. Perform other related duties as assigned.
Benefits: 100% Company paid Employee Only HDHP Medical. 100% Company paid Life Insurance. 401K with Employer Match. Medical Plan options available (two medical plans, dependent/family coverage options) Health Savings Account with Employer contribution. Flexible Savings Account. Optional Benefits: Dental, Vision, Supplemental Life Insurance, Disability, Accident plans.
Qualifications: Expert understanding of Temperature Instrumentation; heater tubeskin thermocouples, reactor multipoint temperature sensors, general thermocouples, general thermowells, etc. Strong leadership and problem-solving skills Clear and professional communication skills Ability to adapt in dynamic environments and learn quickly Team-oriented mindset with a positive and proactive attitude Must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Valid driver’s license Current TWIC (Transportation Worker Identification Credential) Must pass background checks and drug screening (DISA compliance)
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Daily Instruments is seeking an Assembly Technician to join our rapidly growing manufacturing team. This position is responsible for assembly of thermal-instrumentation products that are used in refinery and chemical plant facilities. Assembly Technicians are responsible for working in a cohesive team environment to produce sub-assemblies, and final products as well as coordinating onsite work with engineering, inspections, machine shop and other production personnel. The successful Assembly Technician will ensure that projects are completed safely, in strict compliance with ISO & QA requirements, and in a timely basis to meet shipping requirements.
This is an Entry-Level, Full-Time, Hourly, Non-Exempt production shop position.
Climate-Controlled facility all year round.
Shifts Available: First Shift: Monday - Friday 5:00 am - 1:30 pm Second Shift: Monday - Friday 1:30 pm - 10:00 pm
OT and weekend hours for both shifts assigned as needed to meet production needs.
Assemblers perform tasks that are necessary to the production process. Assemblers aid in the fabrication, maintenance, and repair of component parts and products Carry out assembly day-to-day work instructions to ensure accurate assembly of products Read and understand safety instructions and ensure all safety rules and procedures are followed Focus on quality control of assembled products Read and understand technical drawings, specifications Performs work by following assembly work instructions, technical specifications, and parts lists; gathering parts, subassemblies, tools, and materials. Cutting, stripping, bending, fastening, and working with hand-held tools Documents actions by completing production/worktime tracking and quality forms. Contributes to team effort by accomplishing related results as needed
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits (including: Dental, Vision, Supplemental Life Insurance, Disability (short-term & long-term), Accident Insurance)
Qualifications: Team Work orientation Dependable and Reliable production orientation Experience working in a manufacturing or fabrication environment preferred Proficient knowledge of measuring equipment such as micrometers, dial indicators, calipers, and scaled rules Working knowledge of hand power tools, and other hand-held tools Able to lift up to 100 pounds Must be legally authorized to work in the US for any employer other than current employer Must be fluent in English, any other language skills are beneficial This position is considered SHOP/INDOOR WORK Additional work hours assigned as need to meet production goals Climate-controlled facility all year round
Daily Instruments has deeply invested in providing a safe and healthy work environment, including on-site cleaning staff, disinfecting air-filtration systems installed in all HVAC systems, office air purifiers, disinfecting lighting in communal areas, company provided COVID supplies (including masks, face/eye protection, hand-sanitizer).   Daily Instruments/Daily Thermetrics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA. Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran.

Daily Thermetrics Corp., a fast-paced manufacturing company based in Houston, TX, is looking for motivated, Entry Level - Field Service Technicians to support the installation of our specialized thermometry products at refinery and chemical plant locations.
This hands-on role is ideal for individuals who are mechanically inclined, safety-conscious, and eager to build a career in industrial field services. The ideal candidate will be a clear communicator with a strong willingness to learn, take direction, and adapt to changing environments. Success in this role also requires a positive, can-do attitude and a commitment to teamwork. Will receive per-diem debit cards, funds will be deposited onto the per-diem card before any assignment.
Job Duties Include: Assist with on-site installation of thermometry systems under the direction of a Daily Thermetrics Field Supervisor Perform tasks using grinding wheels, hand tools, rigging equipment, and electrical wiring Work safely in physically demanding environments, including heights and confined spaces Follow all safety procedures and site-specific guidelines Take on additional duties as assigned to support the team and project success
Qualifications: Must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Valid driver’s license TWIC (Transportation Worker Identification Credential) Must pass background checks and drug screening (DISA compliance)
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Pol-Tex, a division of Poly America L.P. is currently seeking a Training Coordinator to join our team. Poly America produces several lines of plastic products including high quality trash bags and construction films.
Job Duties Include: Training Coordinators at Pol-Tex are responsible for conducting, facilitating, and documenting production training. This position will also have the responsibility of ensuring that all employees have completed the appropriate training for their role. Trainers must be comfortable communicating with individuals at all levels of the organization. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
Pol Tex offers competitive compensation packages including: Medical/Dental Paid vacations and holidays 401(K)
Qualifications The ideal candidate will possess: 2-3 years’ experience training required 2-3 years’ experience in manufacturing training preferred Bilingual with above average communication skills using both Spanish and English is required. Excellent communication skills required The ability to work a night shift or a day shift as assigned by management. Conduct New Hire Training of Production Workers Heavy Equipment Training with Forklifts and other Equipment Work with multiple levels of management to create new training programs and initiatives Additional responsibilities and opportunities as they are assigned by management.

Responsibilities: Forklift Drivers at Pol-Tex are responsible for safe operation of sit-down propane forklifts for the purpose of handling, loading, and unloading product. Drivers at Pol-Tex regularly use RF scanners and inventory control systems to pull orders, keep production lines supplied, and re-stock inventory racks. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.
Pol-Tex offers competitive compensation packages including Medical/Dental, paid vacations, paid holidays and 401(K).
If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Qualifications: One year of recent experience operating forklifts. The ability and desire to work safely. The ability to work a night shift or a day shift. 4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.

If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Pol-Tex offers competitive compensation packages including: Medical Dental Paid vacations Paid holidays 401(K)
Qualifications: The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. The desire to expand knowledge and grow with the company. The ability and desire to work safely. The ability to work a night shift or a day shift.  4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Pol-Tex International, a division of Poly-America, L.P., is currently seeking an Industrial Mechanic to join our maintenance team. Pol-Tex International’s mission is to be the safest and most efficient choice in the polyethylene recovery, recycling, and compounding industries.  Our fleet, facility, and equipment combined with our experienced and dedicated professional staff make Pol-Tex International the premier gathering and recycling center for the Gulf Coast Region. Pol-Tex International offers competitive compensation packages including Medical/Dental, paid vacations and holidays, and 401(K). Responsibilities Industrial Mechanics at Pol-Tex International are responsible for the maintenance, installation, troubleshooting, and modification of new and existing industrial converting equipment. This role will document, recommend, and execute maintenance procedures. The Mechanic will be working in a manufacturing maintenance team. At times they will complete the mechanical testing of electro-mechanical equipment. Tasks include replacing, inspecting and dismantling defective parts, and implementing upgrades and part changeovers. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. A strong desire to be hands on with their work and to follow processes through. The aptitude and desire necessary to be a good student of Pol-Tex processes, equipment, and procedures. Problem solving skills including troubleshooting of mechanical equipment.

Encuentra la Carrera perfecta y disfruta un refrescante cambio en Pol-Tex, division de Poly-America, L.P. Nuestra localidad en el area de Baytown se esta expandiendo y provee una gran oportunidad para trabajar en una industria lider en estabilidad y crecimiento.
Los empleados de produccion en Pol-Tex son responsables por la operacion segura de montacargas de gas para el proposito de manejo de cargar y descargar producto. El puesto de trabajo puede implicar responsabilidades adicionales a medida que se necesiten y/o sean asignadas por el gerente.
Responsabilidades: Operadores de montacargas en Pol-Tex son responsables por la operacion segura de montacargas sentado de gas para el proposito de manejo carga y descarga de producto. Los operadores de montacargas en Pol-Tex regularmente usan escaners RF y sistemas de control de inventario para  sacar ordenes , mantener las lineas de produccion suministradas y re llenar los bastidores de almacenamiento. La posicion puede incluir responsabilidades y oportunidades adicionales segun sean necesarias y/o asignadas por el gerente.
Calificaciones: Seis meses a un ano de experiencia reciente operando montacargas La habilidad y el deseo de trabajar de una manera segura La disponibilidad de trabajar un turno de dia o de noche. 4 dias de trabajo/ 4 dias de descanso, dias rotativos segun sean assignados. Responsabilidades adicionales y oportunidades segun sean asignadas por el gerente.

T.G Meat Center is seeking to hire multiple meat packers for their processing and packaging facility. Meat Processors Package raw & processed meat in bags per individual orders in a busy custom processing facility. Label & vacuum seal packages. Pack in trays; some of which may weigh 50+ pounds. Must be able to lift, stand, & work in a cold environment. Experience preferred but not required, will train the right individual. Must have reliable transportation & be dependable. Hours may vary depending on demand but are typically Monday - Friday 7:00am to 5pm with occasional Saturday hours. Competitive wages. Friendly atmosphere. This job requires a person to work in a Cold refrigerated warehouse space. T.G Meat Center is a second chance employer. All applicants will be contacted.
Benefits: Full Medical Dental Vision 401K Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: Entry Level - NO experience required Ability to communicate verbally Be able to lift up to 10lbs-60lbs boxes repeatedly Be physically able to load & unload a dolly or pallett
T.G Meat Center is a second chance employer. EOE. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. 2nd Shift:Tues-Fri 5pm-3:30am.Overtime as needed 5% Shift Differential Responsibilities Include: Operating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: HS Diploma / GED and 2+ years relevant experienceEquipment Experience – Machining experience in a manufacturing or repair environment operating CNC lathes/mills.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives .Health and Safety - Applies elementary concepts to manage and apply safe systems of work. Preferred Experience / Skills: CNC Lathe5 Axis Milling experienceProgramming experience. G-Code Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-15001 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Advance AV Innovation with KARL STORZ North AmericaKARL STORZ is seeking a detail-oriented, hands-on Production & QC Engineer II to join our Custom Solutions team in Stafford, TX. This onsite role is key to assembling, configuring, and testing customized non-medical audio/visual and collaboration systems while improving our processes and ensuring top-tier quality.What you’ll be doing:Help develop processes to support the assembly, configuring, and testing AV and visual collaboration systems to specOwn documentation and design transfer activities from Engineering to OperationsCollaborate with cross-functional teams to implement new features and resolve issuesIdentify and drive process improvements across Production and QCMentor and support technicians on technical processes and standardsWhat’s in it for you Be a Key Contributor: You won’t be just another engineeryou’ll have a direct impact on how innovative, custom AV systems are built, tested, and supported globally.Work with Cutting-Edge Tech: From IP-based AV integration to visual collaboration platforms, you’ll be immersed in hands-on work with the latest tools and technologies.Career Growth Opportunities: As part of a global leader in endoscopy and surgical systems, you’ll have access to internal career pathways, upskilling opportunities, and advancement potential.Collaborative Culture: Join a supportive team where your input matters. You’ll work cross-functionally with engineering, software, and customer success teams to bring complex projects to life.Stability & Purpose: Enjoy the stability of a long-established company with the energy of a team focused on innovationplus the satisfaction of supporting technologies that make a difference in healthcare environments.Competitive Compensation & Benefits: We offer a full suite of benefitsincluding health, vision, dental, PTO, 401(k) with match, and moreto support your wellbeing on and off the job.What you will need to be considered:5+ years of experience in AV systems, electro-mechanical assembly, or computer networkingBachelor’s in Electrical, Mechanical, or Industrial Engineering (or equivalent experience)Proficiency in electronics, IP/networking, schematics, and scripting (Python, Bash, etc.)Skilled with Microsoft Office, AutoCAD, and documentation best practicesStrong communication, problem-solving, and attention to detailWhat will make you stand out:10+ years in AV systems or systems integrationLean Six Sigma CertificationDeep expertise in AV hardware integration and validationWho we are:KARL STORZ is an independent, family-owned company headquartered in Germany’s renowned MedTech manufacturing region. For 80 years, we've pioneered the most groundbreaking innovations in endoscopic surgery, video imaging, and OR integration to benefit patients and healthcare providers alike.With a 9800+ employees worldwide, we pride ourselves on harnessing cutting-edge technology, precise workmanship, and unrivaled customer support. In doing so, we help healthcare facilities manage costs, streamline operations, and deliver positive patient outcomes.Apply now to help shape the future of visual collaboration systemsright here in Stafford, TX.It's not just about the tools we createit’s about the lives we change, together.#LI-BL1

Job Title: Production Superintendent Location: Houston, Texas Individual has a direct interaction with Operations Technical Support Staff, Maintenance Planning, and HES functions. The Production Superintendent has overall responsibility for: meeting daily S&OP demand by ensuring plant is operated per day staff operating notes, managing the Operations personnel, ensuring that all safety policies /practices are followed by all Production personnel, proposing / implementing improvements to these practices and policies where necessary, and for ensuring optimum coordination between Maintenance and Production personnel.Essential Duties & Responsibilities: Maintain HESQ compliance as the top priority: Ensures all AIMS policies, procedures and processes are followed by all shift teams (SWP, MOC, Atlas, EDMS, Shift Change, MyLearning). Auditing will be a key aspect in driving to the desired results.Participates and supports MOC, PSSR, Startup Permits, and PHA activities for the Houston Site.Ensures that all incidents are reported.Ensures that operating procedures are followed, updated, and if necessary, created for tasks.Supports Safe Work Permitting process (review, approve, audits, etc.).Demonstrates commitment to all HESQ matters through high visibility and actions. Deliver planned production to meet customer demand: Drives and develops operating disciplines (complete shift handoff, complete logbook write-ups, accurate procedures, dedicated procedure use, timely and effective training).Working with the Supervisors, defines required staffing for all activities (normal operations, shutdown, startup, turnaround, etc.).Working with the Supervisors, ensures all scheduling and attendance activities (electronic schedules, vacation preferences, absenteeism records, Kronos, etc.) comply with Arkema policies and procedures.Coordinates activities between shift teams and day staff technical support.Communicates plant status and needs using logbook, email, verbal exchange, etc. Lead and develop the Operations Shift Teams to a high-level of performance: Working with the Supervisors, leads performance management process for all Operators on shift – midyear and annual performance reviews, goal setting, recognition, coaching, formal discipline, etc. Driving consistency in performance management across all shifts is a critical deliverable.Working with the Training Specialist, supports and manages training and development for all shift teams.Coaches and develops Supervisors via periodic meetings, in house training and outside learning. Serve as backup to the Operations Manager in their absence, specific duties include: Communicates plant status to inform plant and business stakeholders (daily, weekly).Ensures Operations input to S&OP continues (daily, weekly)Reviews and approves purchase requisitions, safety variances, and environmental reports within delegation of authority, and obtains verbal approval from the Operations Manager when appropriate.As requested by supervision, completes tasks/activities which support the success of the Houston Plant. Required Education/Qualifications/Work experience BS in Chemical Engineering from an accredited university is preferred7+ year’s relevant technical and manufacturing experiencePrefer a minimum 3 years’ experience leading a team within a technical and/or manufacturing environmentAbility to understand and troubleshoot chemical processing to achieve production goals.Excellent verbal and written communications skills to communicate with hourly workforce, business leaders, customers, and company’s technical organization.Previous experience managing direct/indirect reports will be a plus.Excellent judgment and problem analysis skills are required as well as tolerance for stress. Ability to understand and troubleshoot chemical process operations in order support effective operations.Highly motivated team player able to work at a fast pace.Focal point for determining the required production and volume targets based on sales forecast, equipment limitations, inventory space, required maintenance and inspection activities and operating budget.Identify and attain production goals to meet customer’s needs in accordance with all Safety and Environmental requirements.Ensure that adequate technical support is available and that improvements are made to existing processes.Ensures that proposed improvements meet all safety and environment requirements.Develop, train, and coach staff to develop Step Ups to their role. If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells –creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent.

Hablamos EspaolUS Foods/Stock YardsHouston, TXSchedule: Monday - Friday 8:30 am - 5:00 pm (Saturday as needed)ESSENTIAL DUTIES AND RESPONSIBILITIESOperation of Meat Processing Equipment; CryoVac, MultiVacs, Dicers, Needle, Slicer, Portion Cutters, Scales,Pack, trim and customize portions of meat products using knives, or other meat production equipment.Count and stack on tray portions per customer and company specificationsLabel portion with supplied number product labelsSet up packing and labeling area as requiredPack and palletize ordersPerform end of day functionsActively maintain, and merchandise partial cartKeep packing area and cutting room and surrounding area clean and sanitized.Follow company GMP (Good Manufacturing Practices) to maintain sanitary conditionsWork continually in a refrigerated environment 35°F- 45°FComplete miscellaneous other duties as assigned.SUPERVISIONThe incumbent is not required to provide direct supervision for any position.RELATIONSHIPSInternal: The incumbent is required to interact with employees at all levels of responsibility throughout the company.External: The incumbent may be required to perform demonstration cuts or packing for tours, and sales team.QUALIFICATIONS Education/Training: High school diploma or GED equivalent preferred. Incumbent must have the ability to work in a fast paced production environment. Finish time is when work is completed and could require overtime with or without notice.Related Experience/Requirements: Experience with CryoVac, Vemag, MultiVac, Dicers, Needle, Slicer, Portion Cutter, laser portion machinery or other meat production equipment is preferred.Knowledge/Skills/Abilities: Knowledge of beef and lamb productsKnowledge of USDA grades and standards.Physical Requirements:OCCASIONALLY: 1% - 33%FREQUENTLY: 34% - 66%CONTINUOUSLY: 67% - 100%Never: 0%JOB REQUIRES WORKER TO:SIT: NeverSTAND: ContinuouslyWALK: OccasionallyJOB REQUIRES WORKER TO LIFT:1-10 lbs (Sedentary): Occasionally10-20lbs (Light): Frequently25-50lbs (Medium): Frequently50-100lbs (Heavy): OccasionallyOver 100lbs (Very Heavy): NeverJOB REQUIRES WORKER TO CARRY:1-10 lbs (Sedentary):Occasionally10-20 lbs (Light): Occasionally25-50 lbs (Medium): Frequently50-100 lbs (Heavy): OccasionallyOver 100 lbs (Very Heavy): NeverJOB REQUIRES WORKER TO:Push/pull: FrequentlyStep/Climb/balance: FrequentlyStoop/squat: FrequentlyKneel: NeverBend: FrequentlyReach above shoulder: OccasionallyGrasp objects: ContinuouslyManipulate objects: FrequentlyReach/Turn: FrequentlyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $13.00 and $14.42 hr. As applicable, this role will also receive overtime compensation. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

Powell is hiring a Senior Manufacturing Engineer in Southeast Houston! Our Manufacturing Engineers are the process owners that design and improve processes and procedures used for the manufacturing of Powell engineered to order products. This position is required to identify and implement processes that improve safety, quality, and operating efficiency in a manner that supports the objectives of the Business Unit. Posted position does not allow for sponsorship. Job DescriptionEvaluates manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators.Ability to impact project from inception to completion with a focus on handling major expense controlsDevelops manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; conferring with equipment vendors.Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout.Assures product and process quality by designing testing methods; testing finished- product and process capabilities; establishing standards; confirming manufacturing processes.Provides manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements.Prepares product and process reports by collecting, analyzing, and summarizing information and trends.Provides manufacturing engineering information by answering questions and requests.Maintains product and company reputation by complying with government regulations.Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special service.Completes design and development projects by training and guiding technicians.Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies.Contributes to team effort by accomplishing related results as needed.Minimum QualificationsBS Degree in Manufacturing or Industrial Engineering.Minimum 6 years of experience in a Manufacturing Engineer role.Experience with either the Toyota Production System or Lean Manufacturing.Project Management experience, leading multi-disciplined teams.Proven track record of completing process improvements from conception through final implementation and ramp-up.Familiar with statistical test procedures and corrective action techniques.Excellent mechanical and electrical systems aptitude. Understanding of pneumatic, hydraulic, and servo positioning systems, as well as machine controls.Project involvement and organizational skills to handle multiple priorities.Skills, Abilities, & Other RequirementsDemonstrated proficiency with computer skills using Oracle and MS Office Suite.Demonstrated success with specifying, implementing, and manufacturing equipment.Demonstrated mechanical aptitude.Advanced knowledge using drafting/CAD skills with the ability to create and modify Factory Layouts.Knowledge and/or previous experience with production line setup for new products.Knowledge of ISO 9001 Quality System.Demonstrated written and verbal communication skills.Demonstrated simple analytical and problem-solving ability.Ability to implement designs and solutions.Able to follow directed instruction.Able to lead change and respond to tactical changes.Able to prioritize and manage time effectively. (Self-motivated and self-managing).Working & Environmental ConditionsThe employee typically performs duties in a normal office environment. There may be some work in a manufacturing environment and exposure to the elements of our factory. Additionally, there may be some work performed in the field with exposure to construction sites or active customer facilities.It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs, and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents.More InformationThis job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties.#LI-CAB In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Description Position at Conroe Concrete Products Inc Thompson Pipe Group is seeking Production Machine Operator Starting Pay: $20.00/hrSecond Shift: Monday 2:30 PM to 11:30 PM - Friday OT & Weekends as required. What We Offer: Top-tier Medical, Dental, and Vision BenefitsBonus ProgramsProfit SharingLife and Supplement LifeCompany Matched 401K Retirement PlanPaid HolidaysFun EventsTraining and DevelopmentEmployee DiscountsCareer Opportunity! Who We Are Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From the humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all North America. Please visit our website at www.thompsonpipegroup.com Thompson Pipe Group is currently looking for a Production Machine Operator. Overview: This position, Production Machine Operator is responsible for operating production machines to produce concrete products. Essential Functions: Operate equipment (MBK, Packerhead, Vibromac) efficiently to produce concrete products from raw material to yard stageInspect the quality of products according to standardsAssist in maintaining accurate and timely production goalsMonitor the operations of machinery and associated equipment and report any concerns or malfunctionsPerform machine set-up and clean-up and other functions associated with job changesMaintain housekeeping in assigned areaCross train on other aspects of production processPerform other duties as assigned Required Education and experience: Experience in a manufacturing/industrial environment required. Experience in the precast concrete/pipe manufacturing industry preferredAbility to read and interpret documents such as safety procedures, machine operating and maintenance instructionsAbility to maintain a high level of accuracy in all aspects of the positionCurrent Driver’s LicenseHigh School Diploma or GED equivalency preferredMust be able to perform basic math. Work Environment While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud.Will work in varied outdoor environments (in all weather conditions - heat, cold, wet, humid, dry and/or dusty conditions).Exposure to cement, and other raw materials. Physical Demands While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; talk or hear. The employee must occasionally lift or move products and supplies, up to 75 pounds.Must be able to read, write and verbally communicate in the English language (Bilingual a plus)Must be able to wear a hard hat, safety glasses, steel-toed boots, and hearing protectionMust be able to sit and operate equipment for long periods up to 10+ hours per day Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 5 a.m. to 4:30 p.m. OT will be required as needed. Scheduled shift hours are subject to change to meet business needs. This position occasionally requires weekend work. What We Offer: Top-tier Medical, Dental, and Vision BenefitsBonus ProgramsProfit SharingLife and Supplement LifeCompany Matched 401K Retirement PlanPaid HolidaysFun EventsTraining and DevelopmentEmployee DiscountsCareer Opportunity! We are located at 5150 Jefferson Chemical Road, Conroe, Texas 77301 EOE/AA – M/F/Vet/Disability Thompson Pipe Group – Conroe is an Equal Opportunity Employer

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. This will be a 2nd shift opportunity working Monday-Friday 4:00pm-1:00am. Overtime may be required. There is a 5% shift differential. ** Must have experience with Mazatrol/Programming is a must. Responsibilities : Operating CNC Mazak and CNC Haas Machines or Equipment – Operate basic equipment and machines and carry out routine tasks.Program MazakLathes MAZATROLProgram Haz mills Funac G Code controlCreate your own programs and setting up your machines.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Such as micrometers, dial indicators, and depth gauges. Equipment/instruments Precision Equipment Utilization – Interpret and use precision measuring.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: HS Diploma / GED and 3-5 years relevant experienceExperience with Lathes, smooth Mazak or Mazatrol.Must be able to create your own programs and set up the machinesVerbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work.Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating manual lathes, milling machines, or CNC lathes/mills.Program MazakLathes MAZATROLProgram Haz mills Funac G Code controlHS Diploma / GED and 3-5 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-14963 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Our Client in the Chemical Industry is seeking an experienced Senior Production Engineer to provide engineering and line support for the daily production of LaPorte site unit operations. This role involves optimizing plant operations through process improvements, troubleshooting, and leadership in daily activities while collaborating with engineers, supervisors, and operators. The ideal candidate thrives in a fast-paced, multitasking environment and has a strong background in chemical engineering and safety. As part of the emergency crew, responsibilities include fire brigade, hazmat, and confined space rescue efforts. Reporting to the Operations Manager, this role is critical to ensuring plant efficiency, safety, and compliance.LOCATION: LaPorte TX TITLE: Senior Produciton EngineerResponsibilities Responsibility for assigned production units in compliance with established health, safety, environmental, and quality policies, procedures, permits and regulatory requirements Technical review and evaluation of unit operations including data monitoring, analysis, and record keeping Develop / champion improvements that enhance/upgrade unit performance Process safety information maintenance including procedures, technical information, drawings, etc. Maintenance coordination and scheduling, including preventive maintenance compliance Participation in and support of project engineering, new installations, new product introductions Troubleshooting / problem solving for unit operations Participation in the proper training and direction of the workforce Emergency crew participation including fire brigade, hazmat response, and confined space entry rescue Performance Measurements Safety Performance Quality Objectives Production Rates On-stream Time Raw Material Efficiencies Period Cost Control Inventory Control Operator Performance Qualifications Required Education and Experience A bachelor's degree in chemical engineering is required. A minimum of 8 years’ chemical plant manufacturing experience is required with an emphasis on unit operation and leadership. Demonstrated project leadership experience, including start up and commissioning efforts for new processes/equipment and new product introduction. In-depth understanding of chemical plant unit operations including reaction mechanisms, distillation operations, heat transfer, fluid dynamics, mass transfer, kinetics, etc. Direct experience with PSM/RMP covered processes is required, including participation in Process Hazard Analyses, Management of Change and Pre-Startup Safety Reviews. Demonstrated record of achieving cost efficiency Strong safety background in a hazardous chemical process environment Required Skills Strong interpersonal leadership skills Strong verbal and written communication abilities Strong data analysis skills Demonstrated history of critical thinking, problem solving, and action MS Office Suite applications Enterprise resource planning / computerized maintenance management system platforms (SAP, Oracle, Chempax, Maximo, etc.) Experience with reading prints, schematics, drawings and process information Reports to: Operations Manager

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. Must have experience withLine boring on a CNC horizontal boring mill This will be a 2nd shift opportunity; Overtime may be required. Hires are Eligible for a $2500 sign on bonus!!!!! Responsibilities: Operating CNC Machines, Manual Machines, CNC Lathe, VTL, HBMOperating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating CNC Machines, manual lathes, milling machines.HS Diploma / GED and 3-5 years relevant experienceExperience operating LARGE machinesHBM Machine, tooling for Line Boring Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-14270 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will operate a lathe to machine parts and components for flow control valves, including shafts, plugs, seat ring, seat retainers, bodiesetc. The machinist will verify the quality of finished work with precision measurement tools (caliper, micrometer, bore gaugeetc). This is a second Shift position: Monday-Friday 4:00pm – 1:00am, including opportunity to work OT. Sometimes Saturdays and Sundays if the workload requires. There is a 5% shift differential. ** Must have experience with Mazatrol/Programming is a must. Responsibilities & Requirements: Inspect first articles and verify the quality of the finished work by using precision measurement tools and demonstrating an in-depth understanding of specifications and quality workmanship.Meet production goals relating to efficiency, schedules, and scrap/rework.Clean and maintain machines and tools and keep an organized workspace.Apply an understanding of the process flow of documents, materials, and parts through the manufacturing process.Work closely with other machinists to discuss and solve problems relating to repairs and equipment.Collaborate with inventory workers and engineers to status and discuss work-in-progress Preferred Experience / Skills: 5+ Years min experience on CNC machines; able to Mazatrol; Fanuc Control.Experience operating manual mills and lathes is a plus.Expertise required in machining 300-series stainless steel and other materials such as Hastelloy C276, Monel 400, iron nickel and high chrome alloys.Working knowledge of machine tooling and processing requiredSkill required in using and interpreting precision measuring instruments.Strong blueprint reading skills requiredPersonal commitment to quality workmanship, with an ability to assess and explain quality concern to othersAble to accurately and consistently follow detailed procedures in order.An eye for detail to check drawings, part numbers, and materials, and to correctly complete routers and other paperwork.Work collaboratively as part of a team, showing a professional attitude and a service-oriented mindset in a fast-paced, flexible environment.Demonstrated track record of reliable, on-time attendance, able to work overtime and weekends as required.Standing for long times required, repetitive arm motions, frequent lifting of 25 lbs with occasional lifting up to 50 pounds.Must be able to complete math problems quickly and accurately.High School diploma or equivalent. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-13315 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Precision Assembler will be responsible for the preparation of assembly work and documentation. This position will also assemble a variety of equipment and tools and perform test requirements. Additionally, the Precision Assembler will be responsible for the disassembly, cleaning, inspecting and reassembly during any repair process. This person will have access to the most modern materials and tools at our facility to accomplish these expectations to ensure the delivery of a high-quality product to our customers. This is aSecond Shift 2:30pm-11:00pm Monday-Friday. Overtime required when necessary. Responsibilities & Requirements: Complete assemblies according to drawings, instructions, and work orders, performing testing when required.Demonstrates an advanced understanding of inspection equipment, their functions and uses to ensure that all parts and assemblies are within specifications.Ensure all parts and components are clean prior to assembly and that assemblies are completed properly, following all assembly procedures.Follow all safety procedures, and wear required personal safety equipment.Operate various precision measuring tools, i. e. micrometers, vernier, and CMM (Coordinate Measuring Machines), in a warehouse environment, as well as hand tools, i. e. hydraulic torque wrench and fire torch.Troubleshoot and resolve issues within assembly.Have a sharp eye for detail and a results-oriented approach.Capable of calculating basic mathematical functions including computation of rate, ratio, and percent and to convert one type of measurement into another.Participate in CIP activities as needed and comply with all Flowserve policies and procedures.Ability to read and interpret documents such as blueprints and technical drawings safety rules, operating and maintenance instructions, and procedure manuals.Ability to write routine reports and communicate clearly to peers, supervisors, and customersShow a customer-service mindset for on-time delivery and quality workmanship.Basic computer aptitude to use/learn data entry systems and to use Microsoft Office Package.Must be willing to work overtime and weekends as required on short notice.Demonstrate behavior that promotes team building and continuous improvement.Must be able to stand for long periods of time able to safely lift, up to, 50 lbs.Other duties as assigned. Preferred Experience / Skills : Workshop experience.Knowledge of automation control and electrical components.Experience as a mechanic for rotating machines, mechanical devices or as a general mechanic.General certificate of education or vocational training.HS Diploma / GED and 3-5 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-15467 Job Family Group : Operations Job Family : OP Precision Assembly EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.