SEARCH
GO
Manufacturing Jobs
Full Time
3/25/2024
Conroe, TX 77385
(26.8 miles)
$18.00 to $21.00 / hr
The Quality Inspector/Performance Quality Technician is responsible for performing routine tests and validations of finished goods prior to release.
Multiple shifts available: 3pm - 11pm and 11pm - 7am.

Job duties include but are not limited to: Conduct various critical UN DOT regulatory standard performance testing. Understands regulatory performance testing protocols and applies knowledge of hydrostatic pressure, vibrations, gravity, and force to effectively and safely operate specialty equipment. Accurately reports test results and data via electronic media and on neatly written shift reports. Works closely with front-line, operators, and production supervisors to advise when adjustments are needed. Notifies supervisor when inspection data exceeds acceptable limits or when major incidents of poor quality are identified by the Technician. Follows procedures for containments and placing defective or contaminated drums on HOLD. Customer interface to provide information or quality documents such as Certificate of Analysis upon request Aids in the planning, promotion, and organizing of training activities related to product quality and reliability. May be required to assist with testing on samples and special situations. Must perform all duties in the department in a safe manner and consistent with all company safety rules. Develops and demonstrates a knowledge and understanding of established quality policy, procedures, regulatory standards, and instructions. Various other duties and special projects as assigned. Provide backup support for Quality Supervisor.
Benefits: 401(k) Dental insurance Health insurance Health savings account Life insurance Paid time off Tuition reimbursement Vision insurance
Qualifications: High school graduate or equivalent 2 years related trade school training; or equivalent of education and experience in similar environment Use and understanding of precision measuring instruments and gauges, specifications, charts, and diagrams Ability to accurately read measuring devices, blueprints, product specifications, and test procedures Good hand/eye coordination and motor skills Must be able to read, write and speak English Computer skills are required (familiarity with Windows and Microsoft Office suite) Strong attention to detail and recordkeeping Must be able to work independently with little or no supervision
Physical Requirements: Ability to lift 55 lbs. Vision: 20/20 corrected and normal hearing range. Requires good hand/eye/foot coordination and motor skills. Must be able to stand, balance, stoop, kneel and/or crouch for extended periods of time. While performing the duties of this job, the individual is occasionally expose
Fair chance hiring is essential to our commitment to Diversity, Equity, Inclusion, and Belonging. Mauser Packaging Solutions is a second chance and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
Full Time
3/18/2024
Houston, TX 77036
(10.8 miles)
$12.00 to $15.00 / hr
Daily Instruments is seeking an experienced Shipping Clerk to join our rapidly growing manufacturing team. This position will assist with shipping duties for all company needs, as well as distribution of inbound packages. Shipping Clerks are responsible for working in a cohesive team environment to ensure all shipments (domestic & international) are shipped in compliance with customer requirements. The successful Shipping Clerk will ensure that assigned tasks are completed safely, in strict compliance with ISO & QA requirements, and in a timely basis to meet shipping requirements. This is a Full-Time, Hourly, Non-Exempt production shop position.
Carry out assembly day-to-day work instructions to ensure accurate and timely shipments. Read and understand shipping instructions. Work with various couriers/carriers (domestic and international). Build crates, pallets, or skids and box and package orders to eliminate damage of shipment. Receiving inbound shipments of all incoming parts, materials and components. Enter received data into computer system to maintain accurate inventory records. Contributes to team effort by accomplishing related results as needed.
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits (including: Dental, Vision, Supplemental Life Insurance, Disability (short-term & long-term), Accident Insurance)
Qualifications: Teamwork orientation Basic understanding of shop math Dependable and Reliable production orientation Working knowledge of hand power tools, and other hand-held tools Able to lift up to 50 pounds Must be legally authorized to work in the US for any employer other than current employer Must be fluent in English, any other language skills are beneficial This position is considered shop/indoor work; but will also work in outdoor loading dock area Additional work hours assigned as need to meet production goals Climate-controlled facility all year round
Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.   Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
Full Time
3/18/2024
Houston, TX 77036
(10.8 miles)
Daily Instruments is seeking an entry-level Machine Shop Helper to join our rapidly growing manufacturing team. This position will assist with the setup, parts delivery, monitoring, operation, cleaning of machines in machine shop. Shop Helpers are responsible for working in a cohesive team environment to ensure all production goals are in compliance with customer requirements. The successful Machine Shop Helper will ensure that assigned tasks are completed safely, in strict compliance with ISO & QA requirements, and in a timely basis to meet production & shipping requirements.
This is a Full-Time, Hourly, Non-Exempt production shop position.
Machine Shop Helper position will be on: Production Second Shift Monday - Friday 1:30 pm - 10:00 pm
This position is considered shop/indoor work; but will also work in outdoor loading dock area Additional work hours assigned as need to meet production goals Climate-controlled facility all year round
Responsibilities: Machine Shop Helpers perform tasks that are necessary to the production process. Carry out assembly day-to-day work instructions to ensure accurate and timely production goals Read and understand work instructions. Assist with maintaining, operating, cleaning machines Maintain a clean, orderly work environment Contributes to team effort by accomplishing related results as needed
Qualifications: Team Work orientation Basic understanding of shop math Dependable and Reliable production orientation Working knowledge of hand power tools, and other hand-held tools Able to lift up to 50 pounds Must be legally authorized to work in the US for any employer other than current employer Must be fluent in English, any other language skills are beneficial
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits (including: Dental, Vision, Supplemental Life Insurance, Disability (short-term & long-term), Accident Insurance)
Daily Instruments/Daily Thermetrics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA. Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran   Daily Instruments has deeply invested in providing a safe and healthy work environment, including on-site cleaning staff, disinfecting air-filtration systems installed in all HVAC systems, office air purifiers, disinfecting lighting in communal areas, company provided COVID supplies (including masks, face/eye protection, hand-sanitizer)
Full Time
3/18/2024
Houston, TX 77036
(10.8 miles)
Daily Instruments is seeking an Inventory Control Clerk to join our rapidly growing manufacturing team. This position is responsible for maintaining and organizing the stockroom. Inventory Clerks are responsible for working in a cohesive team environment to perform tasks involved in the receiving, storing and distributing of materials. The successful Inventory Clerk will ensure that projects are completed safely, in strict compliance with ISO & QA requirements, and in a timely basis to meet production and shipping requirements.
This is a Full-Time, Hourly, Non-Exempt production shop position. Climate-controlled facility all year round.
Production positions may be assigned to either of the following full-time work schedules: Production 1st Shift: Monday - Friday, 5:00 am - 1:30 pm Production 2nd Shift: Monday - Friday, 1:30 pm - 10:00 pm
Job Duties: Issue raw materials to shop in a timely manner to maintain production schedules Perform data entry functions into Physical Inventory system Transport material parts to work centers and buildings the utilizing forklift, golf cart, and/or pallet jack Perform cycle counts and annual physical inventory to ensure inventory accuracy Report discrepancies between physical counts and computer records Reconcile inventory discrepancies Maintain a clean and orderly stockroom Contribute to cohesive team effort by accomplishing related tasks and demonstrating dependability/reliability
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits Including: Dental, Vision, Supplemental Life Insurance, Disability, Accident plan)
Qualifications: Experience working in a manufacturing or fabrication environment preferred Highly organized with the ability to prioritize changing assignments Able to work irregular or extended hours, including weekends and nights as needed Strong attention to detail. Able to lift up to 50 pounds Must be legally authorized to work in the US for any employer other than current employer Must be fluent in English, any other language skills are beneficial Forklift Operator certification and work experience Additional work hours assigned as need to meet production goals
Daily Instruments has deeply invested in providing a safe and healthy work environment, including on-site cleaning staff, disinfecting air-filtration systems installed in all HVAC systems, office air purifiers, disinfecting lighting in communal areas, company provided COVID supplies (including masks, face/eye protection, hand-sanitizer).   Daily Instruments/Daily Thermetrics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA. Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran.
Full Time
3/18/2024
Houston, TX 77036
(8.9 miles)
Daily Instruments is seeking an entry-level Production Planner to join our rapidly growing design and production team. The production planner is responsible for the accuracy and timeliness of the production process. Duties include a specific focus on the materials and goods required in the production phase or sales orders, ensuring the work instructions and job routers are issued correctly for optimal performance. The Production Planner will be responsible for coordinating onsite work with the engineering teams, designers, purchasing/requisitions, and special project team personnel, as well as working alongside production management staff. The successful Production Planner will ensure that projects are completed safely and accurately, and in a timely manner to meet customer and shipping goals.
Manage the after-sales order or project work-flow plan process to ensure accurate and timely completion of production goals Coordinate with engineering and design teams to ensure all resulting work orders are in compliance with requirements Strict compliance and enforcement of all ISO, QA, contractual, and client requirements Read and understand technical drawings, schematics Planning and prioritizing operations to ensure maximum performance and minimum delay Managing the development of the manufacturing instruction package (Drawing, routing, work instructions etc.) Produce accurate job/shop routings and ‘made-to-order job instructions’ that will directly impact the production processes Coordinate work with and directly communicate with multiple disciplines including engineering, manufacturing, purchasing, welders, and other production staff
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits Including: Dental, Vision, Supplemental Life Insurance, Disability, Accident plan)
Qualifications: High School diploma Familiarity with machine shop, working in a manufacturing/fabrication environment Production Planning or Scheduling experience Understanding of purchasing/requisition in a manufacturing environment preferred Excellent technical communication skills, verbal and written Understanding of: ASME codes and NDT processes, understanding of GD&T and/or welding symbols Self-driven initiative to respond to fluid work environment and rapidly changing priorities Proficient computer skills, including Microsoft Office Enthusiastic team player, Creative thinker, focus on bottom-line results while managing for Total Quality Assurance Compliance Must be legally authorized to work in the United States for any employer other than current employer Must be fluent in English with ability to communicate highly technical terms/ideas; any other language skills are beneficial] This is primarily a sedentary position, but does require the physical ability to work in a busy shop environment including sitting, standing, lifting/moving up to 20 pounds, infrequently.
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
Full Time
3/18/2024
Mont Belvieu, TX 77521
(28.2 miles)
$15.50 / hr
Pol-Tex, a division of Poly-America, L.P., a leading manufacturer of plastic products, is seeking a Maintenance Helper at its Mont Belvieu, Texas location. A successful candidate must be able to adjust to changing priorities and handle multiple tasks simultaneously.
Responsibilities: Assist with the observing mechanical devices in operation and listening to their sounds to locate causes of trouble. Dismantling devices to gain access to remove defective parts, using hoists, cranes, hand tools, power tools, and safety lock-out devices. Examining form and texture of parts to detect imperfections. Inspecting used parts to determine changes in dimensional requirements. Adjusting functioning parts of devices and control instruments. Repairing or replacing defective parts. Installing special functional and structural parts in devices. Testing the performance of devices. Lubricating and cleaning parts. Additional duties as become necessary and/or are assigned by management
Benefits: Competitive wages Comprehensive benefits package Paid vacations and holidays 401(K) On-site fitness facility and more
Qualifications: The ability to work in a fast paced environment Knowledge of and the ability to use basic hand tools Must be able to work rotating night shifts Must be able to adjust to changing priorities and handle multiple tasks Excellent written and oral communication and presentation skills Additional duties as become necessary and/or are assigned by management. 1-3 years of Industrial Maintenance experience preferred
Full Time
3/18/2024
Mont Belvieu, TX 77521
(28.2 miles)
$22.50 / hr
Pol-Tex International, a division of Poly-America, L.P., is currently seeking an Industrial Mechanic to join our maintenance team. Pol-Tex International’s mission is to be the safest and most efficient choice in the polyethylene recovery, recycling, and compounding industries.  Our fleet, facility, and equipment combined with our experienced and dedicated professional staff make Pol-Tex International the premier gathering and recycling center for the Gulf Coast Region. Pol-Tex International offers competitive compensation packages including Medical/Dental, paid vacations and holidays, and 401(K). Responsibilities Industrial Mechanics at Pol-Tex International are responsible for the maintenance, installation, troubleshooting, and modification of new and existing industrial converting equipment. This role will document, recommend, and execute maintenance procedures. The Mechanic will be working in a manufacturing maintenance team. At times they will complete the mechanical testing of electro-mechanical equipment. Tasks include replacing, inspecting and dismantling defective parts, and implementing upgrades and part changeovers. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. A strong desire to be hands on with their work and to follow processes through. The aptitude and desire necessary to be a good student of Pol-Tex processes, equipment, and procedures. Problem solving skills including troubleshooting of mechanical equipment.
Full Time
3/18/2024
Mont Belvieu, TX 77521
(28.2 miles)
Full Time
3/8/2024
Houston, TX 77007
(4.6 miles)
$25.00 to $36.00 / hr
Martin Foods imageMartin Foods is looking for an experienced multi-craft Maintenance Technician to join their team in Houston. This facility produces various meat products for a multitude of restaurants throughout the region. The ideal mechanic will have experience in working within a manufacturing environment repairing, maintaining and installing all types of food production equipment and machinery, as well as general facilities maintenance.
Provides support to the production staff to minimize downtime and maintain high safety and quality standards. Perform scheduled equipment Preventive Maintenance (PM) Program. Troubleshoot and repair all process equipment as safely, quickly and efficiently as possible. Initiates purchase order for equipment and facility needs. To work in a manner which is safe, clean and well organized. Other duties as assigned
Benefits: Competitive Pay - up to $36/hr Competitive Health & Welfare Benefits Company-Matched 401(k) Savings Plan Award Program Potential Paid Vacation Paid Holidays Product Discount
Qualifications: Minimum of 2 years experience as a mechanic in a production/manufacturing environment - food industry preferred. Well versed in mechanical, electrical, pneumatic and hydraulic equipment and systems. Experience in the use of basic hand tools, electrical meters, grinding equipment, drill press and band saws. Refrigeration and HVAC experience is a definite plus. Must have the ability to read and interpret documents such as mechanical drawings, schematics, safety rules, operating/maintenance instructions and procedure manuals. Must be able to perform basic math. Need to also have the ability to communicate effectively with employees in the organization. Welding (ARC, TIG, MIG).
Full Time
2/19/2024
Houston, TX 77036
(10.8 miles)
Daily Thermetrics is seeking a Procurement Assistant to join our rapidly growing Manufacturing company. The successful Procurement Assistant will ensure that projects are completed safely, accurately, and in a timely manner to meet quality requirements, customer demands, and tight shipping goals.
Provide support to the Procurement Department, assist in the preparation of RFQ’s, RFP’s, and purchase orders. Provide support to sales by obtaining pricing from suppliers for their RFQ’s. Assist in tracking open orders, update procurement status and maintain reports. Work with accounting to resolve Supplier invoicing discrepancies. Contact Suppliers to resolve missed deliveries, short shipments. Contributes to team effort by accomplishing related results as needed
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits Including: Dental, Vision, Supplemental Life Insurance, Disability, Accident plan)
Qualifications: High school diploma or equivalent (Associate Degree or B.Sc. in Supply Chain or related fields preferred). Minimum two years experience in a purchasing position. Proficient in purchasing functions, supply and inventory management. Excellent communication, negotiation and interpersonal skills. Must be a detail-oriented team player with ability to prioritize, multitask and work with minimal supervision. Strong organizational skills, understanding of sourcing and the ability to maintain vendor relationships. Experience with spreadsheet computer applications is a must. Dependable and reliable production orientation. Ability to lift and carry 20 pounds. Strong attention to detail. Ability to maintain focus and multitask effectively. Ability to communicate technical concepts and materials specifications, written and verbal.
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
Full Time
2/19/2024
Houston, TX 77036
(8.9 miles)
Daily Thermetrics is a growing, privately-held manufacturer of highly engineering thermal instrumentation, seeking a Maintenance Technician with proven hands-on experience. This position is responsible for performing maintenance, repair, and new/installation projects of physical plant, production machinery and/or equipment. This is a highly visible and important role within our organization, that supports all departments, and various engineering projects, as well as some vendor contact.
Performs routine maintenance on building interior and exterior. Maintains a schedule of when maintenance has been performed and when next service is due. Works in a safe manner and recognizes unsafe situations. Takes appropriate action to ensure safety of themselves and others in building. Read and interpret equipment manuals and work orders to perform required maintenance and service. Diagnose problems, replace or repair parts, test and make adjustments. Perform a variety of plumbing maintenance and carpentry functions. Use a variety of hand and power tools, electric meters and material handling equipment in performing duties.
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits Including: Dental, Vision, Supplemental Life Insurance, Disability, Accident plan)
Qualifications: High School education, or equivalent 1 - 2 years of previous experience in related industry or field Professional communication skills (verbal & written) Strong attention to detail in a dynamic work environment with the ability to consistently recognize changing priorities Proficient computer skills, including Microsoft Office; strongly prefer ERP manufacturing specific software HVAC knowledge valued but not required Self-driven initiative to respond to fluid work environment and rapidly changing priorities Hands-on production, welding, or machine shop, CNC, manual machines experience is beneficial Working knowledge computer skills, including Microsoft Office Organized & detail-oriented with a commitment to 100% completion of projects. Enthusiastic team player, Creative thinker, focus on bottom-line results while managing for Total Quality Assurance Compliance Must be legally authorized to work in the US for any employer other than current employer Must be fluent in English, any other language skills are beneficial
Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.   Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
Full Time
3/29/2024
Houston, TX 77021
(9.9 miles)
WHAT BRINGS YOU HERE: Starting pay rate: $15.00 per hourQuarterly Safety BonusDaily pay options: (Access up to 50% of earned wages daily)Days and shift hours: Monday - Friday 7:00 am to 5:00 pm CSTBenefits start Day ONE!! Who You Are: Ability to read, understand, and communicate paperwork and labelsAbility to read and interpret basic mathematical measurements and effectively use a tape measure What You Will Be Doing: Move glass from, tables, furnace, rolling racks, delivery trucks, or wood crates for eight or more hours, dailyTransport of materials including glass from one position/location to another in an effort toexpedite the production processRead and attach appropriate labels and tags to productQuality inspection, operating equipment, and/or manually maneuvering equipment Skills You Bring: Must be able to read a tape measure. Must be able to lift 75lbs unassisted and 150lbs with assistance. Why Trulite: Trulite offers the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, vision and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if injured outsideof work. We are pleased to offer a comprehensive wellness initiative that includes access to a percentage of your pay daily, if needed, and a progressive financial training program. Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever-improving financial plan. This is also true for those who select and contribute to their Health Savings Account. We match on both employee and family coverage to help cover out-of-pocket expenses and if unused continues to grow until needed. The employer match for your HSA, if you choose to participate, is also vested immediately at 100%, improving your financial health. Trulite bears most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you why Trulite values you as an employee and how we will help you achieve financial independence. We are an Equal Opportunity Employer. We embrace and encourage our employees’ differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.
This website uses cookies for analytics and to function properly. By using our site, you agree to these terms.