Maintains equipment operation by completing inspections and preventive maintenance requirements; correcting vehicle deficiencies; adjusting and alignments; keeping records. Work performed on trucks, trains & heavy equipment.
Job Duties: Determines vehicle condition by conducting inspections and diagnostic tests; identifying worn and damaged parts. Keeps equipment available for use by completing preventive maintenance schedules; installing component and part upgrades; controlling corrosion; completing winterization procedures. Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics; completes machine shop operations; adjusting and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units. Verifies vehicle performance by conducting test drives; adjusting controls and systems. Complies with federal and state vehicle requirements by testing engine, safety, and combustion control standards. Maintains vehicle appearance by cleaning, washing, and painting. Maintains vehicle records by annotating services and repairs. Keeps shop equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; calling for repairs. Contains costs by using warranty; evaluating service and parts options. Keeps supplies ready by inventorying stock; placing orders; verifying receipt. Updates job knowledge by participating in educational opportunities; reading technical and regulation publications. Enhances maintenance department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Performs some physical work to include climbing, heavy lifting, and carrying Travel may be required to reach a vehicle needing repair.
Benefits: Medical Dental Vision Life Insurance 401K with Match Paid Holidays/Vacation Safety Bonus Program
Qualifications: Pre-employment drug and alcohol screening. Background screening including previous employment, education, criminal history and driving record verification. Valid Texas driver license Caterpillar experience a plus. Experience with Backhoes, Excavators, Dozers, Forklift, & Off Road Trucks.

Responsibilities: Forklift Drivers at Pol-Tex are responsible for safe operation of sit-down propane forklifts for the purpose of handling, loading, and unloading product. Drivers at Pol-Tex regularly use RF scanners and inventory control systems to pull orders, keep production lines supplied, and re-stock inventory racks. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.
Pol-Tex offers competitive compensation packages including Medical/Dental, paid vacations, paid holidays and 401(K).
If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Qualifications: One year of recent experience operating forklifts. The ability and desire to work safely. The ability to work a night shift or a day shift. 4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.

If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Pol-Tex offers competitive compensation packages including: Medical Dental Paid vacations Paid holidays 401(K)
Qualifications: The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. The desire to expand knowledge and grow with the company. The ability and desire to work safely. The ability to work a night shift or a day shift.  4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Pol-Tex International, a division of Poly-America, L.P., is currently seeking an Industrial Mechanic to join our maintenance team. Pol-Tex International’s mission is to be the safest and most efficient choice in the polyethylene recovery, recycling, and compounding industries.  Our fleet, facility, and equipment combined with our experienced and dedicated professional staff make Pol-Tex International the premier gathering and recycling center for the Gulf Coast Region. Pol-Tex International offers competitive compensation packages including Medical/Dental, paid vacations and holidays, and 401(K). Responsibilities Industrial Mechanics at Pol-Tex International are responsible for the maintenance, installation, troubleshooting, and modification of new and existing industrial converting equipment. This role will document, recommend, and execute maintenance procedures. The Mechanic will be working in a manufacturing maintenance team. At times they will complete the mechanical testing of electro-mechanical equipment. Tasks include replacing, inspecting and dismantling defective parts, and implementing upgrades and part changeovers. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. A strong desire to be hands on with their work and to follow processes through. The aptitude and desire necessary to be a good student of Pol-Tex processes, equipment, and procedures. Problem solving skills including troubleshooting of mechanical equipment.

Encuentra la Carrera perfecta y disfruta un refrescante cambio en Pol-Tex, division de Poly-America, L.P. Nuestra localidad en el area de Baytown se esta expandiendo y provee una gran oportunidad para trabajar en una industria lider en estabilidad y crecimiento.
Los empleados de produccion en Pol-Tex son responsables por la operacion segura de montacargas de gas para el proposito de manejo de cargar y descargar producto. El puesto de trabajo puede implicar responsabilidades adicionales a medida que se necesiten y/o sean asignadas por el gerente.
Responsabilidades: Operadores de montacargas en Pol-Tex son responsables por la operacion segura de montacargas sentado de gas para el proposito de manejo carga y descarga de producto. Los operadores de montacargas en Pol-Tex regularmente usan escaners RF y sistemas de control de inventario para  sacar ordenes , mantener las lineas de produccion suministradas y re llenar los bastidores de almacenamiento. La posicion puede incluir responsabilidades y oportunidades adicionales segun sean necesarias y/o asignadas por el gerente.
Calificaciones: Seis meses a un ano de experiencia reciente operando montacargas La habilidad y el deseo de trabajar de una manera segura La disponibilidad de trabajar un turno de dia o de noche. 4 dias de trabajo/ 4 dias de descanso, dias rotativos segun sean assignados. Responsabilidades adicionales y oportunidades segun sean asignadas por el gerente.

W.M. Dewey & Son, Inc. is a family-owned business that has been providing services to the oil and gas industry since 1895. We specialize in being a full-service provider of pipe transportation, pipe storage and pipe logistics services. W.M. Dewey has an immediate opening for dependable safety oriented Facilities Maintenance Helper. Who is willing to grow in knowledge and increase their responsibilities in the workplace.
Job Duties: Landscaping duties around yard (operation of lawn equipment) Perform general maintenance around the yard, shop, and office (general electrical and plumbing) Maintain shop floors for cleanliness in and around machines, tools, and equipment Operate a forklift (Training Provided) Assist Diesel Mechanics in the shop as needed (Working on tires, Large Trucks, Forklifts, Small Lawn Equipment, etc.) Order and keep inventory of all parts (some driving required) Use Company vehicle to deliver paperwork and parts between vendors and yards 50/50 Inside and Outside work
Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance
Qualifications: Maintenance experience 1 year preferred Must Have A Valid Texas Drivers License Must have a Clean Driving Record Pass a background Check Must be at least 21 years of age Must be able to lift up to 40 pounds and stand for long periods of time Must have basic Plumbing and Electrical Knowledge Must be able to operate Power tools (chainsaw, power drill, skill saw) Must have reliable transportation to and from work Bilingual (Spanish and English) is a plus but not required Weekends as needed

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. Must have Horizontal boring machine experience (HBM) This will be a 2nd shift opportunity; Overtime may be required. Responsibilities: Operating CNC Machines, BMH, Manual Machines, CNC Lathe, VTL, HBMOperating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating CNC Machines, manual lathes, milling machines.HS Diploma / GED and 3-5 years relevant experienceExperience operating LARGE machinesHBM Machine, tooling for Line Boring Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-14270 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Maquinista Manual Resumen del rol: El maquinista manual tendr un amplio conocimiento sobre un fondo diverso que ejecuta varias mquinas manuales, incluidas, entre otras, fresadoras verticales y horizontales, tornos verticales y horizontales y rectificadoras. Esta persona tendr experiencia en la configuracin y marcacin de varias partes de su mquina. El maquinista QRC de la bomba ser responsable de fabricar piezas a partir de materia prima, as como de mecanizar piezas existentes a nuevas dimensiones o mecanizar piezas reparadas. El maquinista debe ser capaz de trabajar de forma independiente y con instrucciones limitadas, pero siguiendo hojas de ruta y / o dibujos de piezas. Podrn seleccionar insertos de herramientas adecuados, velocidades y alimentaciones segn sea necesario y lo requieran para cumplir con los requisitos de la pieza y el material que se est mecanizando. Responsabilidades: El maquinista manual es responsable de configurar y mecanizar piezas y componentes para todas las bombas y equipos de coquizacin en cualquier mquina en nuestro taller. Trabajar de forma segura y ayudar a los colegas a trabajar de forma segura. Seguir el resumen previo al trabajo y todas las listas de verificacin antes de mecanizar una pieza. Seguir todos los fresadores y procedimientos de mecanizado Piezas de mquinas que utilizan mandrinadoras horizontales manuales, tornos verticales, tornos de motor, molinos, rectificadoras y taladros. Capacidad para trabajar eficientemente dentro de ventanas de tiempo fijas para cada proceso de mecanizado. Capacidad para mantener tolerancias dentro de .0005", e inspeccionar piezas usando micrmetros, medidores, etc. Capacidad para leer impresiones / dibujos y ejecutar en funcin de los datos proporcionados Fabricar herramientas y hardware como parte de la mejora continua de la instalacin. Coordinar con ventas, operaciones, ingenieros y clientes segn sea necesario. Exhibir un comportamiento que fomente la formacin de equipos, la toma de decisiones, la resolucin de problemas y las mejoras continuas. Capacidad para mecanizar una variedad de metales como aceros inoxidables de las series 300 y 400, Inconel 625 y 718, acero al carbono, etc. Cumplir con todas las polticas y procedimientos de Flowserve; especficamente en torno al tiempo y la asistencia, la seguridad y la productividad Requisitos bsicos: Diploma de escuela secundaria o equivalente. 5 aos de experiencia en mecanizado manual, incluyendo HBM y/o VTL Debe tener un conjunto personal de herramientas, micrmetros, amoladoras manuales y caja de herramientas enrollable. Capaz de permanecer de pie durante largos perodos. Demostracin de atencin al detalle y al proceso. Habilidades de comunicacin verbal y escrita en ingls competente Excelentes habilidades de organizacin, capacidad para trabajar de forma independiente, capaz de resolver problemas y priorizar las asignaciones de trabajo. Debe poder trabajar horas extras, incluidos fines de semana y das festivos. Habilidades y destrezas preferidas: Conocimientos informticos, incluidas las aplicaciones de MS Office. Atencin demostrada al detalle y a los procesos Excelentes habilidades organizativas Capacidad para trabajar de forma independiente, resolver problemas y priorizar las asignaciones de trabajo con el apoyo del lder del equipo y el supervisor Debe ser capaz y estar dispuesto a trabajar horas extras, incluidos los fines de semana y das festivos, cuando lo dicten las emergencias del cliente y las necesidades comerciales. Conocimiento de las actividades del entorno de servicio, incluyendo DCI, mecanizado, montaje, prueba y servicio de campo para equipos rotativos. Capacidad para priorizar y gestionar mltiples tareas en un entorno de trabajo acelerado y cambiante Experiencia previa trabajando en el entorno acelerado e impredecible en torno a los servicios de reparacin. Fuerte impulso para hacer que las cosas sucedan y una fuerte actitud de "lo puedo hacer" Flowserve es un fabricante lder mundial y proveedor de servicios posventa de sistemas integrales de control de flujo. nete a una empresa cuya gente est comprometida con la construccin de un futuro ms sostenible para hacer del mundo un lugar mejor para todos. Con 16,000+ empleados en 50+ pases, combinamos nuestro alcance global con presencia local. Nuestro equipo se desafa a s mismo para abordar cada situacin con ingenio y creatividad para ayudar a brindar a nuestros clientes los productos y servicios de control de flujo ms innovadores. Apoyamos a 10,000+ clientes en todo el mundo, creando productos para satisfacer las necesidades de nuestros clientes que suministran energa, agua dulce, productos farmacuticos y otros elementos esenciales a consumidores, empresas y gobiernos a nivel mundial. Lo invitamos a poner en marcha sus talentos y su carrera en Flowserve. Req ID : R-13316

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Job Type:RegularPlains All American is an industry-leading transportation and midstream provider specializing in transportation, storage, processing and marketing solutions for crude oil and natural gas liquids (NGLs). We own an extensive network of pipeline transportation, terminalling, storage and gathering assets in key crude oil and NGL producing basins and transportation corridors and at major market hubs in the United States and Canada. On average, Plains handles more than 6 million barrels per day of crude oil and NGL in its Transportation segment. The company is headquartered in Houston, Texas.We are looking for highly-motivated individuals who enjoy working as part of a team in a dynamic and entrepreneurial work environment.Job Purpose/Summary:Installs, repairs, and maintains diesel engines and HAZMAT tankers. General maintenance as required.Job ResponsibilitiesResponsible for maintenance and repairs on transport trucks, trailers and pickups.Participate in on-call rotation schedule.Ensure proper D.O.T., state inspection and insurance papers are included in the cab data book.May operate fork lift and company assigned pickup.Familiar with all safety procedures for working with electricity, engines, compressors and material safety data sheets for related materials.May work in proximity to significant hazards (H2S, chemicals, high voltage, elevated heights, volatile liquids, etc.), which require safety accommodations and/or procedures.Perform brake jobs, troubleshooting, electrical problems, and inspect equipment (turbo, engine, a/c, all electrical).Perform state truck and trailer inspections.Demonstrate ability to make independent decisions and reports work progress routinely.Proficient with paperwork, inspection compliance and records keeping.Work independently and able to initiate and manage outside repairs.Assist in scheduling trucks for maintenance and inspections.Assist in maintaining Safety Data Sheets.Work under indirect and occasional supervision.May occasionally lead and train other mechanics.Fill in for the lead mechanic when needed.Other duties and responsibilities as assigned by the supervisor.Demonstrate a positive impact by promoting safety in decisions and actions.Knowledge, Skills, and Experience Required:High school diploma or equivalent.Minimum of 3 years of experience.Intermediate mechanical aptitude and familiarity with diesel and gasoline engines, electronics and testing equipment.Basic math skills required to take measurements, change speedometers, read manuals and perform service work.Applicable safety training, licenses and certifications for the job assignment.Must have own tools (Tool Allowance provided).Must have and maintain a valid Class C operator driver’s license to operate company pickup trucks; CDL license is preferred.Successfully pass pre-employment background check (including MVR) and drug testing.#PlainsAt Plains, our employees are our most valuable asset. Hard work is rewarded with competitive compensation and a top-tier benefits program designed to keep our employees safe, healthy and happy. We work hard to deliver the best results to our stakeholders and we also respect our employees need for personal and family time, which is reflected in our benefits program.Salary details estimated by job boards such as Indeed, Glassdoor, and LinkedIn do not represent Plains’ compensation structure. We thank all candidates for their interest; however, only those selected for an interview will be contacted.By submitting your resume, you consent to the collection, use and necessary disclosure of the personal information provided during the application and selection process. Learn more.

Dover is a diversified global manufacturer with annual revenue of over $7 billion. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Fueling Solutions, Imaging & Identification, Pumps & Process Solutions and Refrigeration & Food Equipment. Dover combines global scale with operational agility to lead the markets we serve. Recognized for our entrepreneurial approach for over 60 years, our team of approximately 24,000 employees takes an ownership mindset, collaborating with customers to redefine what's possible. Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." Additional information is available at dovercorporation.com.What You'll Do:Sets up and operates manual machines, including but not limited to mills and lathes, to perform machining operations by performing the following responsibilities:Read, process sheets, blueprints, and sketches of part to determine machining to be done, dimensional specifications, set up, and operating requirementsInterpret work instructionsIdentify, select and install proper tooling for operations being performedCalculate proper feeds and speeds for a variety of steel grades, copper, brass, aluminum and bronzeIntuitively understand capabilities of tooling and machineryUnderstand applicable quality systems and perform necessary quality inspectionsAdhere to all Waukesha Bearings policies and proceduresApply principles of Lean Manufacturing to reduced setup times and improve productivityActively participate in daily Continuous Improvement activitiesEmployee must be able to set up all necessary measuring equipment and routinely check the calibration of the equipment while measuring.What You'd Bring:Experience withMills Machines; ideally EC1600Experience using GibssCam software is strongly preferredPrior experience with precision inspection equipment including, but not limited to, micrometers, calipers, height gauges, bore gaugesProven ability to hold tight machining tolerances of less than .001”Education:One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience.Mental/Visual/Physical Effort:The employee is regularly required to stand and talk or hearoccasionally required to walk; sit; use hands to finger, handle, or feel; and taste or smellmust frequently lift and/or move up to 50 poundsSpecific vision abilities required by this job include close vision, depth perception, and ability to adjust focus.Material Hazards:Regularly exposed to moving mechanical partsOccasionally exposed to fumes or airborneSets up and operates manual machines, including but not limited to mills and lathes, to perform machining operations by performing the following duties.#LI-KZ1#SWEWe consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.#LI-LM1

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking a Fleet Maintenance Manager who will be a dynamic, multi-task oriented senior professional to manage all day-to-day maintenance aspects of this fixed route bus operation. The Fleet Maintenance Manager willensurethat all contractual requirements are achieved, and duties included will consist of daily, weekly, monthly and annual reports. The Fleet Maintenance Manager must be able to properly manage a budget for maintenance program. Qualifications: Talent Requirements:Must have at least three (3) or more years of recent (within the last five (5) years) and relevant experience managing the maintenance functions of a transit bus maintenance shop similar in scope, size, and complexity and with same or similar type of transit vehicles/equipment.Must have experience managing/ directing 10 plus employees (fleet Technicians/Service Workers/Cleaners).Experience working with 50 + buses within the last year.Previous passenger transportation in current project or similar environment preferred.Must be able to manage and interface with client.Must have the ability to track and control parts inventories, vendors and suppliers.Must be able to properly prioritize, implement and manage work schedules, projects and assignments.Must be able to manage the financial/accounting aspects of a fleet maintenance operation.Must be able to communicate effectively with all levels of staff in written and oral formats.Must have computer skills including word processing, spreadsheets and Microsoft outlook.Must have technical competence with light/medium/heavy duty vehicle repair and preventive maintenance.Must display initiative, professionalism, candor and tactat all times.ASE or manufacture’s certifications a plus.Technical experience with fixed route transit bus maintenance.Solid knowledge of managing audits, PM schedules.Experience with Diesel, CNG, and Alternative fuels a plus.Must have a CDL class B with passenger and airbrake endorsement.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants.Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

***************************$5,000 SIGN ON BONUS******************************* Clean HarborsClute, TXis looking for a Diesel Vehicle Mechanicto join their safety conscious team!This position will be responsible for the repairs and preventative maintenance of all company owned fleet. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Competitive wagesOpportunity for increase after 90 days!!!Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching componentOpportunities for growth and development for all the stages of your careerAccess to company paid OEM certifications and trainings!Generous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and tooling Speak with a recruiter today to learn more!! Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Move company equipment safely on yard as needed;Assist drivers with addressing outstanding vehicle issues;Perform preventative maintenance tasks and inspections on company vehicles and equipment;Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment, vehicles, and machinery;Complete daily checklist as requiredAssure that Equipment is properly parked/secured in compliance with facility permit and DOT requirements.Maintain facility via housekeeping dutiesPerforms other duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors business. What does it take to work for Clean Harbors High School diploma or equivalent requiredAbility to work in a team environment1+ years prior experience working on heavy duty-trucks and equipment.Must provide own basic toolsRelated mechanical certifications preferred (not required)Ability to pass a background, drug, and physical test upon hire 40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. “2022 Top Company For Women To Work For in Transportation” *CH

The Service and Parts Technical Advisor acts as a direct liaison between Stellantis, Chrysler, Jeep, Dodge, Ram, Alfa Romeo, and FIAT dealerships within the Central Business Center. The Technical Advisor's responsibility is to provide technical assistance and fixed operations consultation to our dealer service personnel, fleet, and commercial customers. The Technical Advisor will motivate and lead dealer service personnel to higher levels of service and parts performance consistent with corporate and industry direction. They will assist with resolutions on current unresolved issues in support of dealer's efforts to maximize their competitiveness in the marketplace while improving customer retention and loyalty. Job responsibilities include but not limited to: Provide phone and in-dealership technical assistanceTroubleshoot and solve final repair attempt situationsRepresent Stellantis as subject matter expert (litigation/buybacks); CAIR updates needed for each involvementManage dealership technical training requirementsProvide support for C.A.G. / engineering - providing on ground request supportRecall and Required Service Updates (RSU) follow-up and reductionAct as a quality feedback liaisonProvide dealership consultation on the following: repair service agreements and facilities inspectionsTools / equipment facility needsCustomer experience and improved fixed first visitRepair shop process improvements and proactive business planning with a focus on the customer

Entity: Supply, Trading & ShippingJob Family Group: Operations GroupJob Description: About Archaeabp is committed to investing in lower carbon energy so we can meet our ambition to reach net zero by 2050. And while we’re still mostly in oil and gas today, bioenergy is one of our five transition growth engines and a key focus to help us support the global energy transition.Archaea Energy, a bp company, is a leader in landfill gas to energy and the largest renewable natural gas (RNG) producer in the US. With big ambitions, we specialize in the development, construction and operation of RNG, landfill-gas-to-electric and dairy digester facilities. The team operates around 50 sites in 32 states with a robust development pipeline.About the roleLocated in Houston, TX, Conifer Systems has been in business for over 15-years and is seeing unprecedented growth. We contribute our success to our long-term employees, and an environment that promotes teamwork, collaboration, and professional development.The Field Service Technician will be responsible for preforming, General I&E work and supporting the commissioning process of industrial combustion and environmental equipment, ensuring that all systems are installed, tested, and operational to client specifications.Key accountabilitiesInstallation Oversight:Perform the installation, testing, and assist the commissioning of industrial systems, including oxidizers, furnaces, flares, vapor recovery units, scrubbers, and associated controls.Ensure that all activities meet safety and operational standards, promoting a zero-accident work environment.Safety and Compliance:Adherence to safety protocols and ensure that all tasks are performed with safety as a top priority.Ensure compliance with company policies, procedures, and industry standards during department projects.Complete all necessary safety documentation and reviews, and support field teams in maintaining safety standards.Troubleshooting and Technical Support:Troubleshooting and repair of equipment during the commissioning phase, including combustion devices, burner systems, and control panels.Provide technical expertise in analyzing electrical schematics, control systems, and drawings to ensure accurate installation and setup.Work closely with team to resolve technical issues and optimize system performance.Work closely with our vendors to troubleshoot/install 3rd party equipment.Communication:Generate Service reports updating daily progression.Complete on-site checklist including. Loop checks, device test logs, preventive maintenance, and other record keeping documents.Ensure timely communication and updates with Line manager regarding project progress, material needs, and job status.Support aftermarket service operations, including troubleshooting and repair services for previously commissioned equipment.Essential experience• Minimum of 5 years of experience in field service, or similar roles, with a strong background in Burner Management Systems (BMS) and electrical instrumentation.• Proven experience in electrical troubleshooting/Debugging industrial control systems.• Strong troubleshooting skills in mechanical, electrical, and control systems.• Ability to read and interpret P&IDs, electrical schematics, and technical drawings.• Excellent communication skills both written and verbal.• Working Knowledge of PLC’s, HMI and SCADA/DCS• Ability to travel up to 75%, including international locations.Why join us Delivering a better and more balanced energy system requires many different approaches and solutions. All of us have a part to play. We aim to support our people to learn and grow in an inclusive environment in which everyone is respected and treated fairly. So, if you have the right skills, commitment and courage to help us invest in today’s energy system and build out tomorrow’s, apply today!How much do we pay $55,000-$79,000. *Note that the pay range listed for this position is a genuinely expected and reasonable estimate of the range of possible base compensation at the time of posting.This position offers paid vacation depending on your years of relevant industry experience and will range from 120 – 240 hours of vacation per year for full times employees (60 - 240 hours of vacation per year for part time employees). You will also be eligible for 9 paid holidays per year and 2 personal choice holidays.You may learn more about how we calculate paid vacation and view our generous vacation and holiday schedules at benefits@bp. Bp has a parental leave policy as well, which offers up to 8 weeks’ paid leave for the birth or adoption of a child. Learn more at benefits@bp.Join our industry-leading team and you’ll receive a reward and wellbeing package to enable your work to fit with your life. These include, but are not limited to:401K ProgramHealth, Vision, And Dental InsuranceLife InsuranceShort-Term DisabilityLong-Term DisabilityBut above all You’ll play a key part in helping bp deliver our ambition – to be a net zero company by 2050 or sooner and help the world get to net zero. Apply today!Travel RequirementUp to 75% travel should be expected with this roleRelocation Assistance:This role is not eligible for relocationRemote Type:This position is a hybrid of office/remote workingSkills:Control of Work, Cost-conscious decision-making, Maintenance general, Procedures and practices, Reliability general, Risk Management, Safety Leadership, Turnaround generalLegal Disclaimer:We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status.Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process,pleasecontact us.If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Machinist will operate a manual lathe and manual mill to machine stainless steel parts and components of flow control valves. The machinist will verify the quality of finished work with precision measurement tools. The Machinist will also operate a VTL. This is a second Shift position: Monday-Friday,4:00pm - 1:00amwith possible overtime during the week or weekend. Responsibilities & Requirements: Inspect first articles and verify the quality of the finished work by using precision measurement tools and demonstrating an in-depth understanding of specifications and quality workmanship.Meet production goals relating to efficiency, schedules, and scrap/rework.Clean and maintain machines and tools and keep an organized workspace.Apply an understanding of the process flow of documents, materials, and parts through the manufacturing process.Work closely with other machinists to discuss and solve problems relating to repairs and equipment.Collaborate with machine shop lead to discuss work-in-progress Preferred Experience / Skills: Experience operating manual lathes and mills (5+ years); Vertical Turning LatheExpertise required in machining 300-series stainless steel and other materials such as Hastelloy C276, Monel 400, Inconel, iron nickel and high chrome alloys.Working knowledge of machine tooling and processing requiredSkill required in using and interpreting precision measuring instruments.Strong blueprint reading skills requiredPersonal commitment to quality workmanship, with an ability to assess and explain quality concern to othersAble to accurately and consistently follow detailed procedures in order.An eye for detail to check drawings, part numbers, and materials, and to correctly complete routers and other paperwork.Work collaboratively as part of a team, showing a professional attitude and a service-oriented mindset in a fast-paced, flexible environment.Demonstrated track record of reliable, on-time attendance, able to work overtime and weekends as required.Standing for long times required, repetitive arm motions, frequent lifting of 25 lbs with occasional lifting up to 50 pounds.Must be able to complete math problems quickly and accurately.High School diploma or equivalent. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-13316 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Job Type:RegularPlains All American is an industry-leading transportation and midstream provider specializing in transportation, storage, processing and marketing solutions for crude oil and natural gas liquids (NGLs). We own an extensive network of pipeline transportation, terminalling, storage and gathering assets in key crude oil and NGL producing basins and transportation corridors and at major market hubs in the United States and Canada. On average, Plains handles more than 6 million barrels per day of crude oil and NGL in its Transportation segment. The company is headquartered in Houston, Texas.We are looking for highly-motivated individuals who enjoy working as part of a team in a dynamic and entrepreneurial work environment.Job Purpose/Summary:Installs, repairs, and maintains diesel engines and HAZMAT tankers. General maintenance as required.Job ResponsibilitiesResponsible for maintenance and repairs on transport trucks, trailers and pickups.Participate in on-call rotation schedule.Ensure proper D.O.T., state inspection and insurance papers are included in the cab data book.May operate fork lift and company assigned pickup.Familiar with all safety procedures for working with electricity, engines, compressors and material safety data sheets for related materials.May work in proximity to significant hazards (H2S, chemicals, high voltage, elevated heights, volatile liquids, etc.), which require safety accommodations and/or procedures.Perform brake jobs, troubleshooting, electrical problems, and inspect equipment (turbo, engine, a/c, all electrical).Perform state truck and trailer inspections.Demonstrate ability to make independent decisions and reports work progress routinely.Proficient with paperwork, inspection compliance and records keeping.Work independently and able to initiate and manage outside repairs.Assist in scheduling trucks for maintenance and inspections.Assist in maintaining Safety Data Sheets.Work under indirect and occasional supervision.May occasionally lead and train other mechanics.Fill in for the lead mechanic when needed.Other duties and responsibilities as assigned by the supervisor.Demonstrate a positive impact by promoting safety in decisions and actions.Knowledge, Skills, and Experience Required:High school diploma or equivalent.Minimum of 3 years of experience.Intermediate mechanical aptitude and familiarity with diesel and gasoline engines, electronics and testing equipment.Basic math skills required to take measurements, change speedometers, read manuals and perform service work.Applicable safety training, licenses and certifications for the job assignment.Must have own tools (Tool Allowance provided).Must have and maintain a valid Class C operator driver’s license to operate company pickup trucks; CDL license is preferred.Successfully pass pre-employment background check (including MVR) and drug testing.#PlainsAt Plains, our employees are our most valuable asset. Hard work is rewarded with competitive compensation and a top-tier benefits program designed to keep our employees safe, healthy and happy. We work hard to deliver the best results to our stakeholders and we also respect our employees need for personal and family time, which is reflected in our benefits program.Salary details estimated by job boards such as Indeed, Glassdoor, and LinkedIn do not represent Plains’ compensation structure. We thank all candidates for their interest; however, only those selected for an interview will be contacted.By submitting your resume, you consent to the collection, use and necessary disclosure of the personal information provided during the application and selection process. Learn more.

Dover is a diversified global manufacturer with annual revenue of over $7 billion. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Fueling Solutions, Imaging & Identification, Pumps & Process Solutions and Refrigeration & Food Equipment. Dover combines global scale with operational agility to lead the markets we serve. Recognized for our entrepreneurial approach for over 60 years, our team of approximately 24,000 employees takes an ownership mindset, collaborating with customers to redefine what's possible. Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." Additional information is available at dovercorporation.com.What You'll Do:Sets up and operates manual machines, including but not limited to mills and lathes, to perform machining operations by performing the following responsibilities:Read, process sheets, blueprints, and sketches of part to determine machining to be done, dimensional specifications, set up, and operating requirementsInterpret work instructionsIdentify, select and install proper tooling for operations being performedCalculate proper feeds and speeds for a variety of steel grades, copper, brass, aluminum and bronzeIntuitively understand capabilities of tooling and machineryUnderstand applicable quality systems and perform necessary quality inspectionsAdhere to all Waukesha Bearings policies and proceduresApply principles of Lean Manufacturing to reduced setup times and improve productivityActively participate in daily Continuous Improvement activitiesEmployee must be able to set up all necessary measuring equipment and routinely check the calibration of the equipment while measuring.What You'd Bring:Experience withMills Machines; ideally EC1600Experience using GibssCam software is strongly preferredPrior experience with precision inspection equipment including, but not limited to, micrometers, calipers, height gauges, bore gaugesProven ability to hold tight machining tolerances of less than .001”Education:One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience.Mental/Visual/Physical Effort:The employee is regularly required to stand and talk or hearoccasionally required to walk; sit; use hands to finger, handle, or feel; and taste or smellmust frequently lift and/or move up to 50 poundsSpecific vision abilities required by this job include close vision, depth perception, and ability to adjust focus.Material Hazards:Regularly exposed to moving mechanical partsOccasionally exposed to fumes or airborneSets up and operates manual machines, including but not limited to mills and lathes, to perform machining operations by performing the following duties.#LI-KZ1#SWEWe consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.#LI-LM1

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking an Assistant Fleet Maintenance Manager toassist theFleetMaintenance Managerwithmanagement ofthe day-to-day maintenance aspects of the operation of CNG and propane vehicles. The Assistant FleetMaintenanceManager’s responsibilities will include, but not be limited to, assisting theFleetMaintenance Manager with the oversight of maintenance personnel, the organization of the maintenance yard and various administrative duties. The Assistant FleetMaintenanceManager shall be responsible for supervising the maintenance operation during shifts when the Fleet Maintenance Manager is not at the shop. Qualifications: Talent Requirements:Must be CDL licensed.Strong supervisory experience; must be able to supervise 30+ personnel.Must have the ability to track and control parts inventories, vendors and suppliers.Must be able to properly prioritize, implement and manage work schedules, projects and assignments.Must have the ability to manage the financial/accounting aspects of a fleet maintenance operation.Must be able to communicate effectively with all levels of staff in written and oral formats.Must have computer skills including word processing, spreadsheets and Microsoft Outlook.Must have technical competence with light/medium/Heavy duty vehicle repair and preventive maintenance.Must display initiative, professionalism, candor and tactat all times.Must have a minimum of three (3) years fleet/vehicle maintenance supervision experience.ASE Certified fortruck/transit preferred.Diesel experience required.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants.Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

We are seeking an energetic HeavyEquipment Mechanic to join our La Porte, TX team, who can change direction at a moment’s notice to maintain all mobile equipment to include but not limited to repairs, diagnosis, and troubleshooting. Performs daily preventative maintenance as assigned by supervisor.Health and Safety is our #1 priority and we live it 3-6-5!Competitive pay and benefitsComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching component and Employee Stock Purchase PlanOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all timesDisassemble/Reassemble heavy and mobile equipment to troubleshoot, diagnose and repairFabricate metal pieces and replace gaskets as neededTroubleshoot, repair and test all equipment to ensure functionalityUtilize propylene cutting rigRepair equipment using MIG and/or stick weldingOther duties as assignedEnter data for repairs, diagnosis, preventative maintenance, inventory check out and timeComplete daily work and training on computersWhat does it take to work at Clean Harbors High School Diploma or equivalentMust pass Bennett Mechanical II testRequired Diesel Certification3+ years’ experience with heavy and mobile equipment repairAir Conditioning Certification or equivalent requiredCaterpillar and Kubota engine repair experience, certifications or education a plus!Hydraulics Systems troubleshooting repair requiredMust understand schematics to troubleshoot 12&24v heavy equipment systemsRequired cutting rig (propylene cutting torch)Valid Drivers’ LicenseComputer literateJoin our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/Clean Harborsis the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market. Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We are an equal opportunity in employer to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law.Clean Harbors is a Military & Veteran friendly company.*CH #LI-MM1

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will operate a lathe to machine parts and components for flow control valves, including shafts, plugs, seat ring, seat retainers, bodiesetc. The machinist will verify the quality of finished work with precision measurement tools (caliper, micrometer, bore gaugeetc). This is a second Shift position: Monday-Friday 4:00pm – 1:00am, including opportunity to work OT. Sometimes Saturdays and Sundays if the workload requires. Responsibilities & Requirements: Inspect first articles and verify the quality of the finished work by using precision measurement tools and demonstrating an in-depth understanding of specifications and quality workmanship.Meet production goals relating to efficiency, schedules, and scrap/rework.Clean and maintain machines and tools and keep an organized workspace.Apply an understanding of the process flow of documents, materials, and parts through the manufacturing process.Work closely with other machinists to discuss and solve problems relating to repairs and equipment.Collaborate with inventory workers and engineers to status and discuss work-in-progress Preferred Experience / Skills: 5+ Years min experience on CNC machines; able to Mazatrol; Fanuc Control.Experience operating manual mills and lathes is a plus.Expertise required in machining 300-series stainless steel and other materials such as Hastelloy C276, Monel 400, iron nickel and high chrome alloys.Working knowledge of machine tooling and processing requiredSkill required in using and interpreting precision measuring instruments.Strong blueprint reading skills requiredPersonal commitment to quality workmanship, with an ability to assess and explain quality concern to othersAble to accurately and consistently follow detailed procedures in order.An eye for detail to check drawings, part numbers, and materials, and to correctly complete routers and other paperwork.Work collaboratively as part of a team, showing a professional attitude and a service-oriented mindset in a fast-paced, flexible environment.Demonstrated track record of reliable, on-time attendance, able to work overtime and weekends as required.Standing for long times required, repetitive arm motions, frequent lifting of 25 lbs with occasional lifting up to 50 pounds.Must be able to complete math problems quickly and accurately.High School diploma or equivalent. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-13315 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Job Type:RegularPlains All American is an industry-leading transportation and midstream provider specializing in transportation, storage, processing and marketing solutions for crude oil and natural gas liquids (NGLs). We own an extensive network of pipeline transportation, terminalling, storage and gathering assets in key crude oil and NGL producing basins and transportation corridors and at major market hubs in the United States and Canada. On average, Plains handles more than 6 million barrels per day of crude oil and NGL in its Transportation segment. The company is headquartered in Houston, Texas.We are looking for highly-motivated individuals who enjoy working as part of a team in a dynamic and entrepreneurial work environment.Job Purpose/Summary:Installs, repairs, and maintains diesel engines and HAZMAT tankers. General maintenance as required.Job ResponsibilitiesResponsible for maintenance and repairs on transport trucks, trailers and pickups.Participate in on-call rotation schedule.Ensure proper D.O.T., state inspection and insurance papers are included in the cab data book.May operate fork lift and company assigned pickup.Familiar with all safety procedures for working with electricity, engines, compressors and material safety data sheets for related materials.May work in proximity to significant hazards (H2S, chemicals, high voltage, elevated heights, volatile liquids, etc.), which require safety accommodations and/or procedures.Perform brake jobs, troubleshooting, electrical problems, and inspect equipment (turbo, engine, a/c, all electrical).Perform state truck and trailer inspections.Demonstrate ability to make independent decisions and reports work progress routinely.Proficient with paperwork, inspection compliance and records keeping.Work independently and able to initiate and manage outside repairs.Assist in scheduling trucks for maintenance and inspections.Assist in maintaining Safety Data Sheets.Work under indirect and occasional supervision.May occasionally lead and train other mechanics.Fill in for the lead mechanic when needed.Other duties and responsibilities as assigned by the supervisor.Demonstrate a positive impact by promoting safety in decisions and actions.Knowledge, Skills, and Experience Required:High school diploma or equivalent.Minimum of 3 years of experience.Intermediate mechanical aptitude and familiarity with diesel and gasoline engines, electronics and testing equipment.Basic math skills required to take measurements, change speedometers, read manuals and perform service work.Applicable safety training, licenses and certifications for the job assignment.Must have own tools (Tool Allowance provided).Must have and maintain a valid Class C operator driver’s license to operate company pickup trucks; CDL license is preferred.Successfully pass pre-employment background check (including MVR) and drug testing.#PlainsAt Plains, our employees are our most valuable asset. Hard work is rewarded with competitive compensation and a top-tier benefits program designed to keep our employees safe, healthy and happy. We work hard to deliver the best results to our stakeholders and we also respect our employees need for personal and family time, which is reflected in our benefits program.Salary details estimated by job boards such as Indeed, Glassdoor, and LinkedIn do not represent Plains’ compensation structure. We thank all candidates for their interest; however, only those selected for an interview will be contacted.By submitting your resume, you consent to the collection, use and necessary disclosure of the personal information provided during the application and selection process. Learn more.

We are seeking an energetic HeavyEquipment Mechanic to join our La Porte, TX team, who can change direction at a moment’s notice to maintain all mobile equipment to include but not limited to repairs, diagnosis, and troubleshooting. Performs daily preventative maintenance as assigned by supervisor.Health and Safety is our #1 priority and we live it 3-6-5!Competitive pay and benefitsComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching component and Employee Stock Purchase PlanOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all timesDisassemble/Reassemble heavy and mobile equipment to troubleshoot, diagnose and repairFabricate metal pieces and replace gaskets as neededTroubleshoot, repair and test all equipment to ensure functionalityUtilize propylene cutting rigRepair equipment using MIG and/or stick weldingOther duties as assignedEnter data for repairs, diagnosis, preventative maintenance, inventory check out and timeComplete daily work and training on computersWhat does it take to work at Clean Harbors High School Diploma or equivalentMust pass Bennett Mechanical II test3+ years’ experience with heavy and mobile equipment repairDiesel Certification requiredAir Conditioning Certification or equivalent requiredCaterpillar and Kubota engine repair experience, certifications or education a plus!Hydraulics Systems troubleshooting repair requiredMust understand schematics to troubleshoot 12&24v heavy equipment systemsRequired cutting rig (propylene cutting torch)Valid Drivers’ LicenseComputer literateJoin our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/Clean Harborsis the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market. Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We are an equal opportunity in employer to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law.Clean Harbors is a Military & Veteran friendly company.*CH #LI-MM1

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Job Type:RegularPlains All American is an industry-leading transportation and midstream provider specializing in transportation, storage, processing and marketing solutions for crude oil and natural gas liquids (NGLs). We own an extensive network of pipeline transportation, terminalling, storage and gathering assets in key crude oil and NGL producing basins and transportation corridors and at major market hubs in the United States and Canada. On average, Plains handles more than 6 million barrels per day of crude oil and NGL in its Transportation segment. The company is headquartered in Houston, Texas.We are looking for highly-motivated individuals who enjoy working as part of a team in a dynamic and entrepreneurial work environment.Job Purpose/Summary:Installs, repairs, and maintains diesel engines and HAZMAT tankers. General maintenance as required.Job ResponsibilitiesResponsible for maintenance and repairs on transport trucks, trailers and pickups.Participate in on-call rotation schedule.Ensure proper D.O.T., state inspection and insurance papers are included in the cab data book.May operate fork lift and company assigned pickup.Familiar with all safety procedures for working with electricity, engines, compressors and material safety data sheets for related materials.May work in proximity to significant hazards (H2S, chemicals, high voltage, elevated heights, volatile liquids, etc.), which require safety accommodations and/or procedures.Perform brake jobs, troubleshooting, electrical problems, and inspect equipment (turbo, engine, a/c, all electrical).Perform state truck and trailer inspections.Demonstrate ability to make independent decisions and reports work progress routinely.Proficient with paperwork, inspection compliance and records keeping.Work independently and able to initiate and manage outside repairs.Assist in scheduling trucks for maintenance and inspections.Assist in maintaining Safety Data Sheets.Work under indirect and occasional supervision.May occasionally lead and train other mechanics.Fill in for the lead mechanic when needed.Other duties and responsibilities as assigned by the supervisor.Demonstrate a positive impact by promoting safety in decisions and actions.Knowledge, Skills, and Experience Required:High school diploma or equivalent.Minimum of 3 years of experience.Intermediate mechanical aptitude and familiarity with diesel and gasoline engines, electronics and testing equipment.Basic math skills required to take measurements, change speedometers, read manuals and perform service work.Applicable safety training, licenses and certifications for the job assignment.Must have own tools (Tool Allowance provided).Must have and maintain a valid Class C operator driver’s license to operate company pickup trucks; CDL license is preferred.Successfully pass pre-employment background check (including MVR) and drug testing.#PlainsAt Plains, our employees are our most valuable asset. Hard work is rewarded with competitive compensation and a top-tier benefits program designed to keep our employees safe, healthy and happy. We work hard to deliver the best results to our stakeholders and we also respect our employees need for personal and family time, which is reflected in our benefits program.Salary details estimated by job boards such as Indeed, Glassdoor, and LinkedIn do not represent Plains’ compensation structure. We thank all candidates for their interest; however, only those selected for an interview will be contacted.By submitting your resume, you consent to the collection, use and necessary disclosure of the personal information provided during the application and selection process. Learn more.

Clean Harborsis seeking aRegional Fleet Maintenance Manager in Houston, TX. Internally known as the Hub Maintenance Manager, The Regional Fleet Maintenance manager reports to the Director of Fleet Operations. This leadership role is responsible for the Health, Safety, and Welfare of Technicians, Planners, and Inventory Coordinators. This qualified applicant will be responsible for budgeting, scheduling, training, safety compliance, and customer relationships. The Regional Fleet Maintenance Manager works closely with Area Managers to support business needs and to implement company-wide maintenance strategy including preventative maintenance schedules, campaigns, recalls, diagnostics, and equipment specification. This role requires 50% travel.Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentGenerous paid time off, company paid training, and tuition reimbursementPositive and safe work environmentsOpportunities for growth and development for all the stages of your careerEnsuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes.Manage all aspects of the maintenance hub and spoke sites in accordance with the region's business plan and budget.Recruit, train, and professionally develop employees.Responsible for maximizing the company's return on investment for all fleet assets (equipment and vehicles) by planning, managing, and directing all activities associated with maintenance in their Hub.Work closely with Area Managers and Branch Managers to support business needs and to implement companywide maintenance strategy.Manage repairs to ensure maximum uptime to allow the branch to meet customer demands utilizing OT and outsourcing vendors where necessary.Evaluate vehicles and equipment with respect to replacement or refurbishment due to age, history of repair, and lifetime repair costs.Remain current and ensure adherence to all laws, regulations, policies, procedures, and guidelines affecting area of responsibility. (DOT, OSHA, RCRA, Etc.).Prepare reports, analyze data, and make recommendations for continuous improvements.Initiate and carry out projects that improve efficiency and/or reduce operating costs.Ensure that all personnel are adequately trained, equipped, and motivated in a positive manner.Communicate regularly with all business owners to ensure business needs are met.Ensure all tools, equipment, and machinery are maintainedCommunicate clear expectations and foster a collaborative climate with peers and teams.5+ years of operations background in logistics, maintenance, transportation or related field3 to 5 years of strong leadership and personnel developmentAbility to create actionable items out of data and informationStrategic planning, coupled with tactical executionAbility to work across business linesDemonstrated project and change leadership abilityStrong negotiation skillsAbility to lead a large group of employees across multiple facilitiesProven success record in safety, employee retention and cost savings.Join our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us atwww.cleanharbors.com/careersClean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is one-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us.We thank all those interested in joining the Clean Harbors team; however only those that complete the online application and meet the minimum job qualifications will be considered for this role.Clean Harbors is a Military & Veteran friendly company.*CH#LI-JS1#LI-Onsite

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Job Type:RegularPlains All American is an industry-leading transportation and midstream provider specializing in transportation, storage, processing and marketing solutions for crude oil and natural gas liquids (NGLs). We own an extensive network of pipeline transportation, terminalling, storage and gathering assets in key crude oil and NGL producing basins and transportation corridors and at major market hubs in the United States and Canada. On average, Plains handles more than 6 million barrels per day of crude oil and NGL in its Transportation segment. The company is headquartered in Houston, Texas.We are looking for highly-motivated individuals who enjoy working as part of a team in a dynamic and entrepreneurial work environment.Job Purpose/Summary:Installs, repairs, and maintains diesel engines and HAZMAT tankers. General maintenance as required.Job ResponsibilitiesResponsible for maintenance and repairs on transport trucks, trailers and pickups.Participate in on-call rotation schedule.Ensure proper D.O.T., state inspection and insurance papers are included in the cab data book.May operate fork lift and company assigned pickup.Familiar with all safety procedures for working with electricity, engines, compressors and material safety data sheets for related materials.May work in proximity to significant hazards (H2S, chemicals, high voltage, elevated heights, volatile liquids, etc.), which require safety accommodations and/or procedures.Perform brake jobs, troubleshooting, electrical problems, and inspect equipment (turbo, engine, a/c, all electrical).Perform state truck and trailer inspections.Demonstrate ability to make independent decisions and reports work progress routinely.Proficient with paperwork, inspection compliance and records keeping.Work independently and able to initiate and manage outside repairs.Assist in scheduling trucks for maintenance and inspections.Assist in maintaining Safety Data Sheets.Work under indirect and occasional supervision.May occasionally lead and train other mechanics.Fill in for the lead mechanic when needed.Other duties and responsibilities as assigned by the supervisor.Demonstrate a positive impact by promoting safety in decisions and actions.Knowledge, Skills, and Experience Required:High school diploma or equivalent.Minimum of 3 years of experience.Intermediate mechanical aptitude and familiarity with diesel and gasoline engines, electronics and testing equipment.Basic math skills required to take measurements, change speedometers, read manuals and perform service work.Applicable safety training, licenses and certifications for the job assignment.Must have own tools (Tool Allowance provided).Must have and maintain a valid Class C operator driver’s license to operate company pickup trucks; CDL license is preferred.Successfully pass pre-employment background check (including MVR) and drug testing.#PlainsAt Plains, our employees are our most valuable asset. Hard work is rewarded with competitive compensation and a top-tier benefits program designed to keep our employees safe, healthy and happy. We work hard to deliver the best results to our stakeholders and we also respect our employees need for personal and family time, which is reflected in our benefits program.Salary details estimated by job boards such as Indeed, Glassdoor, and LinkedIn do not represent Plains’ compensation structure. We thank all candidates for their interest; however, only those selected for an interview will be contacted.By submitting your resume, you consent to the collection, use and necessary disclosure of the personal information provided during the application and selection process. Learn more.

HPC-Industrial, powered by Clean Harbors, in Baytown, TX, is looking for an IS Equipment Operator (CDL Required) to join their safety conscious team! This team member is responsible for the safe and successful execution of jobs across all service lines and various other responsibilities. The Equipment Operator serves as a representative of HPC-Industrial in creating a continuous working relationship with clients/customers. Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life. Why work for HPC-Industrial Health and Safety is our #1 priority and we live it 3-6-5!Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOwn part of the company with our Employee Stock Purchase PlanOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsKey Responsibilities: Act as safety representative responsible for safety policies and procedures of both the company and the customer, including hands-on information regarding operations, safety, equipment, emergency response and administrative functions;Hands-on operation, when required, of manual and automated hydroblasting equipment;Operation of special equipment, such as Ultra High Pressure pumps;Operate equipment by energizing the pumping equipment and/or any specialized hydroblasting and/or chemical cleaning equipment, vacuum trucks and cutting equipment being used on the job;May be required to examine surface cleaned to ensure conformance to company and customer specifications;Perform routine maintenance on company equipment being used on the job;Perform any and all duties associated with liquid vacs, air machines and jet rodders;Direct a crew of vacuum technicians;Transport equipment and personnel to and from customer locations;Completes pre and post trip inspections, driver’s logs and complies with all other vehicle policy and DOT requirements;Loading and unloading hoses;Unload vacuum truck at the dump site;Provide general maintenance in the field;Perform other related duties as assigned.Required Qualifications:Execute a 180-degree rotary motion of the cervical spine in order to allow complete movement of the head and neck;Must be able to hold and operate with both hands a double trigger hydroblast shotgun and other hydroblast equipment;Climb ladders and work from scaffolding and stationary platforms up to heights of 200 feet;Tolerate and function in confined spaces of a minimum of five (5) foot inside diameter;Hold the back thrust of 50lbs. on a straight 66” pipe for a minimum of one (1) hour;Must be physically capable of using both negative pressure and air supplied respirators;Duties include driving heavy equipment for long periods;Must be able to wear protective clothing and/or equipment. This includes, but is not limited to, nomex coveralls, a back belt, slickers, rubber boots, a fresh air breathing mask and escape pack, and a hard hat;Work under extreme climate conditions (excessive high heat index of 95+degree Fahrenheit, 98% humidity; and sub-zero weather conditions) relative to geographic location;Exposure to dust (chemical and environmental), fumes (chemical and fluids), exhaust and highly pressurized fluids. (A respirator will be provided when required.);Noise levels exceed 85 dBA (hearing protection is provided and required).What does it take to work for HPC-Industrial Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs;Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations;Valid driver’s license, CDL Class A or B and other requirements of company’s driving policy required when driving company vehicle or using personal vehicle on company business;Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers;Experience operating a vacuum truck. Smartphone required for Electronic Logging Device;Working knowledge of operating equipment used in wet and dry vacuums.About HPC-IndustrialHPC-Industrial, a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees.HPC-Industrial, Powered by Clean Harbors, is an equal opportunity employer.HPC-Industrial is a Military & Veteran friendly company.*HPC*LI-LP1

********************$5,000 SIGN ON BONUS******************** Clean HarborsLa Porte, TXis looking for aMobile Vehicle Mechanicto join their safety conscious team!This position will be responsible for routine maintenance, inspections, and repairing of all company fleet at branch locations throughout the area. Why work for Clean Harbors Health and Safety is our #1 priority, and we live it 3-6-5!Competitive wagesOpportunity for increase after 90 days!!!Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching component.Opportunities for growth and development for all the stages of your careerGenerous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and toolingAccess to company paid OEM certifications and trainings! Speak with a recruiter today to learn more!! Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times.Correct all equipment deficiencies and perform preventative maintenance on company owned equipment as directed by management.Ability to perform thorough inspection of equipment and identify unsatisfactory condition.Full compliance with mandatory PPE requirements during all work-related activities and tasksTravel to other locations to perform repairs and maintenance on equipment as required.Completes and submits all associated paperwork as required for tracking PM schedules.Maintain active light duty or DQ driver status as per mobile vehicle type.Performs other duties and tasks as assigned from time to time by management. What does it take to work for Clean Harbors High School diploma or equivalent required.Valid driver's license and clean driving record.1+ years prior experience working on heavy duty-trucks and equipment.Must be able to provide own basic tools.Willingness to travel within assigned territory up to 70%.Attention to detail.Strong communication skills.Ability to work flexible shifts including nights, weekends, and overtime as required.Ability to determine vehicle condition by conducting inspections, scheduled PM's and diagnostic tests; identifying worn and damaged parts & replacement as needed.Ability to pass a background, drug, and physical test upon hire. 40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. “2022 Top Company for Women to Work for in Transportation”

*********************$5,000 SIGN ON BONUS*******************Clean Harbors Deer Park, TX is looking for a HM183 Tank Inspector to join their safety conscious team! The HM183 Tank Inspector is primarily responsible to perform visual, internal, pressure and leak tests on truck mounted tanks. As well as being responsible for tank testing on Hazardous Material certified tanks such as vac trucks, hydro excavators, oil tankers, guzzlers, tanker trailers, cargo tanks, and more. Why work for Clean Harbors Health and Safety is our #1 priority, and we live it 3-6-5!Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching component.Opportunities for growth and development for all the stages of your careerGenerous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and toolingAccess to company paid OEM certifications and trainings! Ask a recruiter today for more information!Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Perform VIPK inspections [visual, internal, pressure, leakage];Timely and accurate completion of all required paperwork;Assist with other repairs and preventative maintenance in shop as required;Order parts and maintain inventory as required; Perform necessary tank test on units, and ensure they comply with all government and company standards and regulations;Perform repairs to tanks within the inspectors’ qualifications;Apply proper decaling to tanks;Maintain all tools and test equipment;Assist with finding qualified repair shops when necessary.What does it take to work for Clean Harbors 3+ years’ experience as a tank inspector (VIPK inspections) required;High school diploma or GED required.HM-183 Register Inspector (Tank Inspector) Certificate is strongly preferred;1+ years diesel mechanic experience with heavy-duty trucks and/or equipment required;Must have own set of basic tools, up to ½” (specialty inspector tools will be provided);Strong computer skills required;Valid Driver’s License is required;Experience operating heavy equipment is an asset. 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company.*CH

Clean Harborsis seeking aTravelingField Inspector.TheField Inspectoroversees and documents daily site activities for remediation and emergency response projects. In addition, Field Inspector will be required to collect soil and groundwater samples, air monitoring data and completion of field activities. Field Inspector will work under the direct supervision of the Field Project Manager/Field Supervisor and will assist in the completion of a project.***An exciting way to build a career with Clean Harbors using this role as a steppingstone to work through the chain of the Remediation team and ultimately into a Project Manager position while gaining the necessary skills and experience to do so. Travel 95-100% required:This position will travel 6 weeks on the road and 1-week home paid.Location:Houston, TX preferred but also:Texas, Georgia, Florida, Arkansas, Tennessee, Alabama, Louisiana, Mississippi, OklahomaPay:$25 an HR, OT and per diem available**Per Diem available daily, travel costs covered by the company.Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5;Competitive wages;Comprehensive health benefits coverage after 30 days of full-time employment;Group 401K with company matching component;Opportunities for growth and development for all the stages of your career;Generous paid time off, company paid training and tuition reimbursement;Positive and safe work environments.Key Responsibilities:Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Accurately and completely document site activities including cost tracking, worksheets, waste shipping logs, manifest management, health and safety, documentation of meetings and conference calls and other paperwork via laptop or mobile device;Work in field with hands on labor alongside crew and Project Manager/Field Service Supervisor;Travel to different project locations including Wastewater Treatment plants, soil remediation locations, and more;Reading and understanding of project documents and contracts;Will gain 40-hour Hazwoper, OSHA 10 and possibly more certifications through the company;Learn to calibrate air monitoring meters and associated Health & Safety equipment;Work on project financial tracking and assist in various project administrative functions, including generation of required reports, etc.;Ordering and receiving supplies for projects;Possibly operate some heavy equipment.What does it take to work for Clean Harbors High School Diploma or equivalent is required;Bachelor’s degree in Environmental Science or Engineering required;Be safety orientated and have a commitment to safety;Willing to do manual labor;Willing to work outside in all kinds of weather, utilizing prescribed Personal Protective Equipment;Valid DL and clean MVR required;Should have working knowledge of Microsoft Office software and professional level written / oral communication skills. Civil Engineering / construction / survey experience a plus.40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us.Join our safety focused team today. To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/.Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class.Clean Harbors is a Military & Veteran friendly company.*CH#LI-SE1