Daily Thermetrics Corp., a fast-paced manufacturing company based in Houston, TX, is looking for motivated, Entry Level - Field Service Technicians to support the installation of our specialized thermometry products at refinery and chemical plant locations.
This hands-on role is ideal for individuals who are mechanically inclined, safety-conscious, and eager to build a career in industrial field services. The ideal candidate will be a clear communicator with a strong willingness to learn, take direction, and adapt to changing environments. Success in this role also requires a positive, can-do attitude and a commitment to teamwork. Will receive per-diem debit cards, funds will be deposited onto the per-diem card before any assignment.
Job Duties Include: Assist with on-site installation of thermometry systems under the direction of a Daily Thermetrics Field Supervisor Perform tasks using grinding wheels, hand tools, rigging equipment, and electrical wiring Work safely in physically demanding environments, including heights and confined spaces Follow all safety procedures and site-specific guidelines Take on additional duties as assigned to support the team and project success
Qualifications: Must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Valid driver’s license TWIC (Transportation Worker Identification Credential) Must pass background checks and drug screening (DISA compliance)
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

The Fleet Technician repairs, overhauls, and provides preventative maintenance for automobiles, buses, or other automotive vehicles used by a facility.
Primary Duties and Responsibilities: Examines vehicle and discusses assessments with Transportation Supervisor regarding the nature and extent of damage, problem, or malfunction. Performs preventative maintenance for vehicles according to predetermined schedules. Raises vehicle, with hydraulic jack or hoist, to gain access to mechanical units bolted to underside of vehicle. Removes units such as engine, transmission, or differential. Disassembles unit and inspects parts for wear. Repairs or replaces parts such as pistons, rods, gears, valves, and bearings. Overhauls or replaces carburetors, blowers, generators, distributors, starters, pumps, fuel injection systems, or air conditioning systems. Rebuilds parts such as crankshafts and cylinder blocks. Rewires ignition system, lights, and instrument panel. Relines and adjusts brakes, aligns front end, repairs or replaces shock absorbers, and solders leaks in radiator. Mends damaged body and fenders by hammering out or filling in dents and welding broken parts. Replaces and adjusts headlights, and installs and repairs accessories such as radios, heaters, mirrors, and windshield wipers. Plans work procedure. Performs other duties as assigned.
Full-time employees will enjoy a competitive benefits package with options for you and your family including: This position is eligible to receive a Health & Welfare Benefit Rate per hour up to 40 hours per week and not to exceed 2080 hours per year. Paid Time Off Paid Holidays 401(k) Matching Health/Vision/Dental Life Insurance Health Savings Account Tuition Reimbursement Employee Discount Reduced Tuition Rates Disability Insurance Employee Assistance Program Pet Insurance Paid Training Flexible Spending Account The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law.
Qualifications: High school diploma or general education degree (GED). One (1) year professional experience as a vehicle maintenance technician. Certification as an ASE (Automotive Service Excellence) desirable. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of an organization. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Ability to work with computers and the necessary software typically used by the department. Must be at least twenty-one (21) years of age or older.
Equal Opportunity Employer

W.M. Dewey & Son, Inc. is a family-owned business that has been providing services to the oil and gas industry since 1895. We specialize in being a full-service provider of pipe transportation, pipe storage and pipe logistics services. W.M. Dewey has an immediate opening for dependable safety oriented Facilities Maintenance Helper. Who is willing to grow in knowledge and increase their responsibilities in the workplace.
Job Duties: Landscaping duties around yard (operation of lawn equipment) Perform general maintenance around the yard, shop, and office (general electrical and plumbing) Maintain shop floors for cleanliness in and around machines, tools, and equipment Operate a forklift (Training Provided) Assist Diesel Mechanics in the shop as needed (Working on tires, Large Trucks, Forklifts, Small Lawn Equipment, etc.) Order and keep inventory of all parts (some driving required) Use Company vehicle to deliver paperwork and parts between vendors and yards 50/50 Inside and Outside work
Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance
Qualifications: Maintenance experience 1 year preferred Must Have A Valid Texas Drivers License Must have a Clean Driving Record Pass a background Check Must be at least 21 years of age Must be able to lift up to 40 pounds and stand for long periods of time Must have basic Plumbing and Electrical Knowledge Must be able to operate Power tools (chainsaw, power drill, skill saw) Must have reliable transportation to and from work Bilingual (Spanish and English) is a plus but not required Weekends as needed

The Materials Manager at Gulf Coast Alloy Welding (GCAW) is responsible for ensuring that all materials, components, and sub-services are procured, expedited, and available on time for fabrication projects. This role requires strong drawing interpretation skills to determine material requirements based on fabrication drawings and project specifications.
The Materials Manager will oversee material inquiries, procurement coordination, expediting, and scheduling while working closely with buyers, project managers, and vendors to meet project deadlines. Additionally, they will verify that all materials comply with ASME standards and project requirements.
Key Responsibilities: 1. Drawing Interpretation & Material Identification: Review fabrication drawings and determine the required materials, insulation, internals, and coatings. Work with engineering and project teams to clarify material specifications and resolve discrepancies. Ensure materials align with ASME code requirements, client specifications, and fabrication processes. Verify that bills of materials (BOMs) are accurate and reflect actual project needs.
2. Procurement & Material Planning: Establish Order-By Dates to ensure materials are procured on schedule. Initiate and manage material inquiries and send them to the Buyer for processing. Ensure that all required materials (including internals, insulation, L&P’s, vessel/tanks, and other sub-services) are secured before the fabrication start date. Verify material specifications and grades for ASME code compliance.
3. Vendor Coordination & Expediting: Track open purchase orders and expedite materials as needed to meet deadlines. Develop and maintain relationships with vendors to ensure timely deliveries and favorable terms. Coordinate with suppliers for material certifications, quality documentation, and compliance with ASME standards. Troubleshoot and resolve delays, shortages, or quality issues with vendors and suppliers.
4. Inventory & Scheduling: Monitor on-site inventory levels and ensure stock aligns with project needs. Work closely with Project Managers (PMs) to update and maintain project material schedules. Ensure material deliveries align with the Start of Fabrication (S.O.F.) date. Adjust schedules based on fabrication delays, vendor delays, or changes in project scope.
5. Compliance & Documentation: Ensure material traceability and maintain proper documentation for ASME compliance. Verify Mill Test Reports (MTRs), heat numbers, and other material certifications. Work with QA/QC teams to confirm material integrity and adherence to project requirements. Maintain accurate records of purchases, deliveries, and supplier communications.
Benefits: Flexible schedule Paid time off Monday to Friday Overtime
Qualifications: Associates or Bachelors degree in a math related field of study OR 3-5 years of experience in materials management, procurement, or supply chain in a fabrication, welding, or manufacturing environment. Strong ability to read and interpret fabrication drawings and bills of materials (BOMs). Knowledge of material grades and industry standards. Familiarity with purchasing processes, vendor relations, and expediting. Strong organizational and scheduling skills to manage multiple projects simultaneously. Proficiency in ERP systems, inventory management software, or procurement tools. Ability to work closely with buyers, suppliers, project managers, and shop personnel.
Preferred: Experience in pressure vessel fabrication, oil & gas, or heavy industrial manufacturing. Knowledge of steel grades, alloys, welding consumables, and insulation materials. Strong negotiation and problem-solving skills to handle supplier challenges.

T.G Meat Center is seeking to hire multiple meat cutters. This job requires a person to work in a cold refrigerated warehouse space. These are full-time positions, and we are looking to hire meat cutters with at least 1-2 years experience. Candidates that have experience cutting meat with commercial electric bandsaw are preferred. Work hours are 7am to 4pm, with occasional Saturdays and Overtime. All applicants will be contacted.
Benefits: Full Medical Dental Vision 401K Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: MUST be 18 years or older Able to utilize knives, saws, grinders and other equipment to perform meat cutting and trimming. Demonstrate the ability to identify different meat cuts. Willing to work individually as well as in a team. Maintain a safe environment- Personal Safety and Food Safety. Positive Attitude—makes everyone’s day better, including yours! Willing to learn and follow our processes. Ability to communicate verbally Be able to lift up to 60lbs Be physically able to load & unload a dolly or pallett Manufacturing experience is helpful, but not necessary.
T.G Meat Center  is a second chance employer. EOE. We celebrate diversity and are committed to creating an inclusive environment for all employees.

We are looking to hire experienced concrete finishers who can expertly pour, level, and smooth concrete on a variety of surfaces including roads, sidewalks, curbs, and floors. You may also be required to set forms, patch existing surfaces, cut expansion joints, and monitor the curing of the concrete to ensure a high-quality finish.
Setting forms that hold the concrete in place Cleaning and inspecting surfaces for pouring issues Directing the casting of the concrete with the truck driver Pouring, smoothing, and leveling concrete using a rake, trowel, float, and screed Monitoring the effects of the weather on the curing process Applying sealing and hardening components Safely operating power vibrator to ensure the concrete is compacted Molding and constructing expansion joints using joiners and edging tools Polishing surface using a power surfacing machine
Benefits: Health Dental 401K Life Insurance *Waiting period may apply
Qualifications: Must pass a physical and drug/alcohol test Minimum 2 years work experience as a concrete laborer or mason Ability to stand for long periods Ability to lift heavy materials and work long hours Ability to kneel for long periods Knowledge of hand-held and power tools including power vibrators, polishers, cutting saws, and edging tools Able to work shifts, at night and on public holidays as required
Forde Construction is an Equal Opportunity Employer

Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Daily Thermetrics is seeking Experienced Welders to join our rapidly growing welding and production team. A Welder is responsible for assembling pieces of metal together or repairing damage in metal components using heavy machinery that emits high heat, melting the metal into shape. Duties include reviewing blueprints, cutting metal into the appropriate shape and smoothing molten metal to remove creases. The successful Welder will ensure that projects are completed safely and accurately, and in a timely manner to meet stringent QA, ISO, customer and work order requirements. This is not an entry-level welder position.
Must successfully pass a 6G Welding Assessment.
Production positions may be assigned to either of the following full-time work schedules: First Shift: Monday – Friday   5:00 am – 1:30 pm Second Shift: Monday – Friday   1:30 pm – 10:00 pm
Job Duties: Design optimal workflow by working with manufacturing engineering and fabrication departments for assigned weld projects Expertly welds small, medium, and large components of various metals and alloys. Read and comprehend technical drawings, blueprints, schematics Excellent communication skills, both verbal and written Knowledge of metallurgy Knowledge of various welding techniques, including GTAW TIG, MIG, and oxy-fuel welding Knowledge of manual and mechanical welding techniques Determining the appropriate welding equipment or method based on requirements Setting up components for welding according to specifications Document welding processes that meet engineering product requirements, quality standards, and safety requirements. Maintain equipment in a condition that does not compromise safety and maintains responsibility for all tools and equipment assigned. Demonstrate continued high-caliber performance and improvement to reduce errors. Scrap, waste to improve and reduce labor and material costs. Coordinate work with multiple disciplines including engineering, designers, drafters, welders, and other production staff
Benefits: 100% Company paid Employee Only HDHP Medical. 100% Company paid Life Insurance. 401K with Employer Match. Medical Plan options available (two medical plans, dependent/family coverage options) Health Savings Account with Employer contribution. Flexible Savings Account. Optional Benefits: Dental, Vision, Supplemental Life Insurance, Disability, Accident plans.
Qualifications: Must successfully pass a 6G Welding Assessment. Minimum of 1 to 3 years of proven experience as a welder. Professional welding certification (e.g., AWS) is highly desirable. Prior experience in a manufacturing, fabrication, or machine shop environment. Proficient in reading and interpreting technical documents and drawings, including WPSs, PQRs and WPQs. Hands-on experience with various welding techniques and equipment (TIG, MMA, etc.). Skilled in the use of both electrical and manual tools such as saws, calipers, and squares. Familiarity with ASME codes and non-destructive testing (NDT) processes. Solid understanding of Geometric Dimensioning and Tolerancing (GD&T) and welding symbols. Strong knowledge of safety standards and a commitment to using appropriate PPE (helmet, face shield, gloves, etc.). Excellent technical communication and documentation skills. Ability to work independently with minimal supervision. Strong mechanical aptitude and keen attention to detail. Self-motivated with the ability to adapt to a dynamic work environment and shifting priorities. Must be authorized to work in the United States for any employer. Sponsorship or visa transfers are not available at this time. High school diploma, vocational school certificate, completion of a recognized craftsman apprenticeship program or equivalent education. Fluency in English is required; additional language skills are a plus.
Daily Instruments/Daily Thermetrics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA. Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran

Responsibilities: Forklift Drivers at Pol-Tex are responsible for safe operation of sit-down propane forklifts for the purpose of handling, loading, and unloading product. Drivers at Pol-Tex regularly use RF scanners and inventory control systems to pull orders, keep production lines supplied, and re-stock inventory racks. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.
Pol-Tex offers competitive compensation packages including Medical/Dental, paid vacations, paid holidays and 401(K).
If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Qualifications: One year of recent experience operating forklifts. The ability and desire to work safely. The ability to work a night shift or a day shift. 4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.

If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Pol-Tex offers competitive compensation packages including: Medical Dental Paid vacations Paid holidays 401(K)
Qualifications: The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. The desire to expand knowledge and grow with the company. The ability and desire to work safely. The ability to work a night shift or a day shift.  4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Pol-Tex International, a division of Poly-America, L.P., is currently seeking an Industrial Mechanic to join our maintenance team. Pol-Tex International’s mission is to be the safest and most efficient choice in the polyethylene recovery, recycling, and compounding industries.  Our fleet, facility, and equipment combined with our experienced and dedicated professional staff make Pol-Tex International the premier gathering and recycling center for the Gulf Coast Region. Pol-Tex International offers competitive compensation packages including Medical/Dental, paid vacations and holidays, and 401(K). Responsibilities Industrial Mechanics at Pol-Tex International are responsible for the maintenance, installation, troubleshooting, and modification of new and existing industrial converting equipment. This role will document, recommend, and execute maintenance procedures. The Mechanic will be working in a manufacturing maintenance team. At times they will complete the mechanical testing of electro-mechanical equipment. Tasks include replacing, inspecting and dismantling defective parts, and implementing upgrades and part changeovers. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. A strong desire to be hands on with their work and to follow processes through. The aptitude and desire necessary to be a good student of Pol-Tex processes, equipment, and procedures. Problem solving skills including troubleshooting of mechanical equipment.

Encuentra la Carrera perfecta y disfruta un refrescante cambio en Pol-Tex, division de Poly-America, L.P. Nuestra localidad en el area de Baytown se esta expandiendo y provee una gran oportunidad para trabajar en una industria lider en estabilidad y crecimiento.
Los empleados de produccion en Pol-Tex son responsables por la operacion segura de montacargas de gas para el proposito de manejo de cargar y descargar producto. El puesto de trabajo puede implicar responsabilidades adicionales a medida que se necesiten y/o sean asignadas por el gerente.
Responsabilidades: Operadores de montacargas en Pol-Tex son responsables por la operacion segura de montacargas sentado de gas para el proposito de manejo carga y descarga de producto. Los operadores de montacargas en Pol-Tex regularmente usan escaners RF y sistemas de control de inventario para  sacar ordenes , mantener las lineas de produccion suministradas y re llenar los bastidores de almacenamiento. La posicion puede incluir responsabilidades y oportunidades adicionales segun sean necesarias y/o asignadas por el gerente.
Calificaciones: Seis meses a un ano de experiencia reciente operando montacargas La habilidad y el deseo de trabajar de una manera segura La disponibilidad de trabajar un turno de dia o de noche. 4 dias de trabajo/ 4 dias de descanso, dias rotativos segun sean assignados. Responsabilidades adicionales y oportunidades segun sean asignadas por el gerente.

Maquinista Manual Resumen del rol: El maquinista manual tendr un amplio conocimiento sobre un fondo diverso que ejecuta varias mquinas manuales, incluidas, entre otras, fresadoras verticales y horizontales, tornos verticales y horizontales y rectificadoras. Esta persona tendr experiencia en la configuracin y marcacin de varias partes de su mquina. El maquinista QRC de la bomba ser responsable de fabricar piezas a partir de materia prima, as como de mecanizar piezas existentes a nuevas dimensiones o mecanizar piezas reparadas. El maquinista debe ser capaz de trabajar de forma independiente y con instrucciones limitadas, pero siguiendo hojas de ruta y / o dibujos de piezas. Podrn seleccionar insertos de herramientas adecuados, velocidades y alimentaciones segn sea necesario y lo requieran para cumplir con los requisitos de la pieza y el material que se est mecanizando. Responsabilidades: El maquinista manual es responsable de configurar y mecanizar piezas y componentes para todas las bombas y equipos de coquizacin en cualquier mquina en nuestro taller. Trabajar de forma segura y ayudar a los colegas a trabajar de forma segura. Seguir el resumen previo al trabajo y todas las listas de verificacin antes de mecanizar una pieza. Seguir todos los fresadores y procedimientos de mecanizado Piezas de mquinas que utilizan mandrinadoras horizontales manuales, tornos verticales, tornos de motor, molinos, rectificadoras y taladros. Capacidad para trabajar eficientemente dentro de ventanas de tiempo fijas para cada proceso de mecanizado. Capacidad para mantener tolerancias dentro de .0005", e inspeccionar piezas usando micrmetros, medidores, etc. Capacidad para leer impresiones / dibujos y ejecutar en funcin de los datos proporcionados Fabricar herramientas y hardware como parte de la mejora continua de la instalacin. Coordinar con ventas, operaciones, ingenieros y clientes segn sea necesario. Exhibir un comportamiento que fomente la formacin de equipos, la toma de decisiones, la resolucin de problemas y las mejoras continuas. Capacidad para mecanizar una variedad de metales como aceros inoxidables de las series 300 y 400, Inconel 625 y 718, acero al carbono, etc. Cumplir con todas las polticas y procedimientos de Flowserve; especficamente en torno al tiempo y la asistencia, la seguridad y la productividad Requisitos bsicos: Diploma de escuela secundaria o equivalente. 5 aos de experiencia en mecanizado manual, incluyendo HBM y/o VTL Debe tener un conjunto personal de herramientas, micrmetros, amoladoras manuales y caja de herramientas enrollable. Capaz de permanecer de pie durante largos perodos. Demostracin de atencin al detalle y al proceso. Habilidades de comunicacin verbal y escrita en ingls competente Excelentes habilidades de organizacin, capacidad para trabajar de forma independiente, capaz de resolver problemas y priorizar las asignaciones de trabajo. Debe poder trabajar horas extras, incluidos fines de semana y das festivos. Habilidades y destrezas preferidas: Conocimientos informticos, incluidas las aplicaciones de MS Office. Atencin demostrada al detalle y a los procesos Excelentes habilidades organizativas Capacidad para trabajar de forma independiente, resolver problemas y priorizar las asignaciones de trabajo con el apoyo del lder del equipo y el supervisor Debe ser capaz y estar dispuesto a trabajar horas extras, incluidos los fines de semana y das festivos, cuando lo dicten las emergencias del cliente y las necesidades comerciales. Conocimiento de las actividades del entorno de servicio, incluyendo DCI, mecanizado, montaje, prueba y servicio de campo para equipos rotativos. Capacidad para priorizar y gestionar mltiples tareas en un entorno de trabajo acelerado y cambiante Experiencia previa trabajando en el entorno acelerado e impredecible en torno a los servicios de reparacin. Fuerte impulso para hacer que las cosas sucedan y una fuerte actitud de "lo puedo hacer" Flowserve es un fabricante lder mundial y proveedor de servicios posventa de sistemas integrales de control de flujo. nete a una empresa cuya gente est comprometida con la construccin de un futuro ms sostenible para hacer del mundo un lugar mejor para todos. Con 16,000+ empleados en 50+ pases, combinamos nuestro alcance global con presencia local. Nuestro equipo se desafa a s mismo para abordar cada situacin con ingenio y creatividad para ayudar a brindar a nuestros clientes los productos y servicios de control de flujo ms innovadores. Apoyamos a 10,000+ clientes en todo el mundo, creando productos para satisfacer las necesidades de nuestros clientes que suministran energa, agua dulce, productos farmacuticos y otros elementos esenciales a consumidores, empresas y gobiernos a nivel mundial. Lo invitamos a poner en marcha sus talentos y su carrera en Flowserve. Req ID : R-13316

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. This will be a 2nd shift opportunity working Monday-Friday 4:00pm-1:00am. Overtime may be required. Responsibilities : Operating CNC Mazak and CNC Haas Machines or Equipment – Operate basic equipment and machines and carry out routine tasks.Program MazakLathes MAZATROLProgram Haz mills Funac G Code controlCreate your own programs and setting up your machines.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Such as micrometers, dial indicators, and depth gauges. Equipment/instruments Precision Equipment Utilization – Interpret and use precision measuring.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: HS Diploma / GED and 3-5 years relevant experienceExperience with Lathes, smooth Mazak or Mazatrol.Must be able to create your own programs and set up the machinesVerbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work.Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating manual lathes, milling machines, or CNC lathes/mills.Program MazakLathes MAZATROLProgram Haz mills Funac G Code controlHS Diploma / GED and 3-5 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-14963 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Job DescriptionFactory Location:Pasadena, TXCompensation:$38.65 / hourShift Differential:6%-8% of base hourly rate shift differential paid for applicable hours workedSchedule:12 hour shift, 6:00pm to 6:30am, Monday - Friday Must be willing to train on Dayshift, 6:00am - 6:00pm, Monday - Friday, for at least 3 weeksBenefits:Medical, prescription, dental, vision, life and disability insurance, 401(k) with match, company discounts, paid vacation, and much more! Employees are eligible for benefit election on day 1 of employmentKey responsibilities include but are not limited to the following:- Restoring machine to operating conditions during machine runtime failure in a team setting - Complete reactive maintenance on production lines to recover from equipment failures by repairing mechanical, electrical, and structural components - Create retrofits and fabrication, complete machine tear down/repair and assembly and work on PLC’s, VFD’s, and electric motors - Conduct creative problem solving to identify and perform equipment improvements - Participate in special project work on equipment upgrades or installations - Work with team members and operators to ensure the daily production schedule is met - Plan, lead and execute preventative maintenance (PM) according to PM schedule to minimize equipment downtime - Maintain partnerships with team members and vendors using effective communication - Provide break relief to production operators or team members as needed - Operate a forklift as needed to complete dutiesQualificationsKey qualifications include: - High school diploma or GED; additional technical training or certifications desired - 3 or more years of previous experience in an industrial manufacturing environment - Demonstrated sense of urgency in completing tasks and comfort working in a high-speed production environment - Strong mechanical and electrical skills; PLC experience a plus - Solid computer skills, including the use of Word, Excel, Outlook, SAP desired - Experience with CMMS or ERP systems needed, SAP experience preferred - Ability to work independently or with a team and communicate effectively - Solid problem solving and decision-making skills with the ability to coach others - Able to move/handle 50 lbs. as needed while performing work - Able to work with an awkward posture for 2 hours or more - Willingness to work holidays and weekends as we are a 24/7 facility operating through most weekends and holidaysPrimo Brands’ established portfolio includes billion-dollar brands Poland Spring® and Pure Life®, premium brands like Saratoga® and Mountain Valley®, regional leaders such as Arrowhead®, Deer Park®, Ice Mountain® Ozarka®, and Zephyrhills®, purified brands, Primo Water® and Sparkletts®, and flavored and enhanced brands like Splash® and AC+ION®. Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come.Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. If you need any assistance or accommodations due to a disability, please contact us at

Company Description: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere.At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown’s history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them.From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward.We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team.Want to Learn More Watch A Day in the Life of a Crown Field Service Technician! click here.Job Posting ExternalJob DutiesTroubleshoot, diagnose and repair Crown and all other makes of lift trucks.Perform all assigned planned maintenance on customer lift trucks.Maintain a service van and its inventory.Process paperwork after completion of each job.Minimum QualificationsLess than 2 years related experienceHigh school diploma or equivalentValid driver's license, good driving record, and ability to safely operate lift trucks.Preferred QualificationsGood mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics.Good written/verbal communication and customer care skills.Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred.Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment.Industry related training is preferredAbility to read and understand service manuals, plan, and follow-throughWork Authorization:Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire.No agency calls please.Compensation and Benefits:Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more.Crown also offers Service Technicians:Award-Winning Service TrainingCompany Vehicle for Field Service TechniciansTool InsuranceNo Flat Rate40 Hours Per Week plus OvertimeUniformsSpecialty ToolsPrimarily 1st ShiftCareer Advancement OpportunitiesEOE Veterans/Disabilities

Company Name: ARS-Rescue Rooter Overview: Pay: $80-120k (Performance Pay Based)Earning potential over $100K/year based on performanceSchedule: FT-Weekend AvailibiltyFull-time, year-round workJoin ARS, the nation’s largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience.What We Offer:Insurance available after 31 daysLow-cost medical (as low as $5/week)Dental, vision, HSA/FSA401(k) with company match13 days PTO + 8 paid holidaysCompany-paid life insuranceTake-home vehicle + gas cardUniforms + cleaning serviceWeekly direct deposit Responsibilities: Troubleshoot, service, and repair residential HVAC systems with the support of full training, professional tools, and a strong leadership network. Qualifications: What You Need:3 years of residential HVAC Service experience is required.EPA certification (or ability to obtain)Valid driver’s license & clean driving recordMust pass background and drug screeningAbility to enter attics, crawlspaces, and lifting heavy equipmentIf you have the experience we seek, APPLY NOWNote: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Line of Business: OtherPay Range: $82,830.00 – $110,469.99About UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingDevelop and manage detailed maintenance schedules and work orders to ensure timely and efficient maintenance activities.Coordinate with maintenance technicians, engineering teams, and operations staff to schedule and prioritize tasks across multiple product lines.Implement preventive maintenance strategies to minimize equipment downtime and extend asset lifespan.Estimate time, resources, and costs for maintenance jobs, manage inventory, and work with vendors to procure necessary tools and parts.Ensure all maintenance activities comply with safety regulations and industry standards, while maintaining accurate records and running reports for management.What Are We Looking ForStrong analytical and problem-solving skills.Excellent communication and coordination abilities.Proficiency in maintenance planning software and tools, with a preference for previous experience using SAP.Ability to work independently and as part of a team.Commitment to safety and quality standards.Work EnvironmentFast-paced and dynamic work environment.Collaborative team culture.Opportunities for professional growth and development.What We OfferCompetitive base salary and participation in our annual incentive plan.401(k) retirement savings plan with an automatic company contribution as well as matching contributions.Highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug Benefits.Health Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA).AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance.Paid Bonding Leave, 15 days of Paid Vacation, 40 hours of Paid Sick Leave, and 10 Paid Holidays.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Overview: Are you ready to take flight in a dynamic and fast-paced aviation industry As a global leader in aviation services, Swissport provides Ground Handling, Cargo Handling, and Passenger Services to over 300 million passengers annually. Our mission is simple – “To provide the aviation industry with consistent and tailor-made solutions around the globe, for a better customer experience.” We believe that our people are what differentiates us from our competition. At Swissport, we are driven by our core values of Show You Care, Do the Right Things and Win as a Team, and we are currently seeking dedicated individuals, who align with these values, to join our team at various locations across the globe. Job SummaryGSE Mechanic is responsible for service and maintenance, keeping in good order all Ground Service Equipment at a designated station, keeping Swissport Ramp and other service agencies safe with reliable equipment that meets all local and governing laws.The expected pay rate is $19.00/hourFull-time employees are offered a range of health and wellness benefits as well as 401(k) with company match paid vacation time, sick time, and company paid holidays.Your activitiesOperate and drive all types of GSE equipment – motorized and non-motorized.Perform and show competence in preventive maintenance per established schedules on all ground support equipmentProvide trouble-shooting and diagnostic assessment of ground support equipment as requiredHydraulic knowledge or basics necessary. Must be willing to learn hydraulic systemsAirport deicing training will be required. Reporting to work during snow, Ice and cold weather required. Overtime is necessary during weather emergenciesWill be working outside in all weather conditions year-roundRemove malfunctioning ground support equipment from service and ensure GSE is not returned to service until malfunction has been accurately diagnosed and repairedRespond to emergency service calls as well as accidents involving ground support equipmentComplete all maintenance/repair documentation consistent with carrier, station, airport authority, municipal, state, federal and SP requirementsComply with all federal, provincial, municipal, airport authority and carrier security requirementsWill retain a motor vehicle driver’s license for both air side / non airside in good standing at all timesFollow all safety guidelines set out by WCB, EPA, WHIMIS, and SP managementKeep GSE shop and its equipment always clean and serviceable, report all deficiencies to managementFuel equipment as necessary with full regard for all safety and environmental requirementsWill liaison with Ramp management, customers and staff in a professional manner when neededWork as a self-starter and report to shop leads dailyYour profileValid driver's licenseTrade school training and or a mechanical background preferred.Good oral and verbal communication skillsGood computer skills.Willing to clean and maintain a safe workshop.Willing to travel when necessary for training or to assist other SP stations with GSE needs as requiredWhat we offer401(k)Dental insuranceHealth insuranceLife insurancePaid time offRetirement planTuition reimbursementVision insuranceAt Swissport, we believe in diversity, equal opportunity, and the power of our values to drive our success. We are committed to providing a workplace that fosters inclusion and where all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Visit our website at www.careers.swissport.com to learn more about Life at Swissport.Join Swissport today and be part of a team that connects the world of aviation!

In our tuition-free Tech Fundamentals program, you will master the basics of IT with real-world applications. What’s Included in Tech Fundamentals - Up to 20 weeks of instructor-led virtual training - Opportunity for a paid internship or a project-based learning experience - Opportunity to earn industry-recognized certifications: CompTIA A+ & IT Fundamentals+, a Google IT Support Certificate, and an IT Generalist Apprenticeship credential - Exposure to Microsoft, Cisco, AWS, and other leading technologies - Mentoring from senior-level IT professionals - Employment readiness workshops - Job placement assistance with access to a wide range of top employers - A full range of ongoing social service and personal development support Who is Eligible Young Adults - 18–26 years of ageHigh school diploma or equivalent - Legally authorized to work in the US - Located in or near the following cities:Baltimore, Brooklyn/New York City, Dallas, San Antonio, Houston, Detroit, Newark, St. Louis, Kansas City, Raleigh, Dayton Military Veterans and Military Spouses - Over 21 years of age - Legally authorized to work in the US - Must be one of the following: Transitioning active-duty service member through the DoD SkillBridge program / honorably discharged / member of the Guard or Reserves - In or near the following cities: Baltimore, Dallas, San Antonio, Houston, Detroit, Newark, St. Louis, Kansas City, Raleigh, Dayton

Dreaming big is in our DNA. It’s who we are as a company. It’s our culture. It’s our heritage. And more than ever, it’s our future. A future where we’re always looking forward. Always serving up new ways to meet life’s moments. A future where we keep dreaming bigger. We look for people with passion, talent, and curiosity, and provide them with the teammates, resources and opportunities to unleash their full potential. The power we create together – when we combine your strengths with ours – is unstoppable. Are you ready to join a team that dreams as big as you do SALARY:Pay Rate $40.21 per hourFull utilization Saturdays 1.5x and Sundays/Holidays 2x payLimited overtime Monday through Friday (OT rate of 1.5x the hourly pay) SHIFT: 8 hour work day, on one of three shifts, 1st: 11PM to 7AM. 2nd: 7AM to 3PM. 3rd: 3PM to 11PM. Holidays and weekends are also required.COMPANY:Michelob ULTRA. Cutwater Spirits. Budweiser. Kona Brewing Co. Stella Artois. Bud Light. That’s right, over 100 of America’s most loved brands, to be exact. But there’s so much more to us than our top-notch portfolio of beers, seltzers, and more. We are powered by a 19,000-strong team that shares our passion to create a future with more cheers. We look for people with talent, curiosity, and commitment and provide the teammates, resources and opportunities to unleash their full potential. The power we create together – when we combine your strengths with ours – is unstoppable. Are you ready to join a team that dreams as big as you do ROLE SUMMARY:Our Supply group is responsible for brewing, packaging and shipping the famous Budweiser beer. They also oversee aluminum can manufacturing, barley fields, hop farms and a rice mill. Life in the brewery is non-stop action with high-speed lines, tight production schedules and astonishingly high quality standards. This is a place where we measure efficiency in seconds, not hours, days or weeks. Paramount in all of this is a dedication to safety above all else and social responsibility. 99.8% of everything that enters our breweries is either completely used in the process or recycled. We also dedicate those big, high-speed lines to help our communities during times of disaster by packaging cans of emergency drinking water. Our customers expect the best and the Supply team provides it.JOB RESPONSIBILITIES:Maintain machinery, meeting maintenance requirements for 480-volt, 3 phase systems, and minimizing downtime will be necessary.Support, troubleshoot, improve, and maintain high-speed production and packaging machinery.Utilize SAP to accurately and thoroughly detail and track all corrective and preventive maintenance performed throughout the course of the day; including searching and issuing parts, documenting equipment issues and entering inspection/measurement pointsPrioritize and self-schedule maintenance work around production activities.Drive plant goals & objectives through individually led projects and continuous improvement activitiesResponsible for programmable controllers and computer process controls.Ensure quality standards are met at all times.JOB QUALIFICATIONS:PLC programming and troubleshooting experience required.3 year industrial electrical/programming experience or two-year technical degree preferredOutstanding communication and team-orientation skills.Knowledge of Servos and related controllers including hydraulic and pneumatic, temperature controls.Ability to troubleshoot problems, identify root causes (e.g. six sigma analysis) and propose and implement remediesAbility to read and interpret electrical schematicsAbility to perform mechanical work, valve replacement, conveyor bearing and chain replacement, motor/gearbox replacement, lube routesApplication of high-level quality standards.Adhere to plant safety and 5S requirements; Complete assigned work efficiently and per Standard Operating Procedures (SOPs).Excellent computer skills.Outstanding work history, including good attendance.WHY ANHEUSER-BUSCH:Anheuser-Busch has always dreamed big. It’s who we are as a company. It’s our culture. It’s our heritage. And more than ever, it’s our future. A future where we’re always looking forward. Always serving up new ways to meet life’s moments. A future where we keep dreaming bigger. To reimagine what a beer company can be. And what, together with our people and our partners, Anheuser-Busch can do. Our collective impact is significant. Over the last decade alone, we have contributed more than $400 million to charitable organizations that support our communities, provided over 90 million cans of emergency drinking water, and, together with our wholesaler partners, invested more than $1 billion into responsible drinking initiatives. At the heart of these investments is our shared commitment to community – providing opportunity for our people, lifting our neighbors, and making a meaningful difference in the world. This future is our purpose. A future that everyone can celebrate, and everyone can share in. A future with more cheers.BENEFITS:Health benefits including Medical, Dental, Vision, Wellness and Tax-Advantaged Savings and Spending AccountsLife Insurance and Disability Income ProtectionGenerous Parental Leave and FMLA policies401(k) Retirement Savings options with a company matching contributionChance to work in a fast-paced environment among a company of ownersFree Beer!#AC-1

23005 Katy Freeway, Katy, TX 77450Experienced Automotive Technician Auto Repair Tech Experience is RequiredKIA Experience is Preferred$30 - $41/Hour! Tool Relocation AssistanceWestside KIA automotive dealership in Katy, TX is family-owned and a great place to have a rewarding career! Our high-volume service department is seeking EXPERIENCED Automotive Technicians to join our team! Enjoy working with the newest technology and equipment in our shop. We help our techs learn new skills to increase their income and advance their careers. Apply now and drive your career forward with our growing organization! Upload your resume AND complete the assessment for priority consideration.We Provide Excellent Benefits:$30 - $41/hour performance income based on experience and certificationsTool relocation assistanceWe will match your current vacation timeAll training expenses paid to further your careerContinued education, manufacturer hands-on and web-based trainingMedical, dental and vision insurancePaid holidays and vacationEmployee discounts on vehicles and serviceCareer advancementTeam environment5-day work week, No SundaysResponsibilities - Experienced Automotive Technician:Perform vehicle inspections, diagnostics, repairs, maintenance and installations, including engine, transmission, electrical, steering, suspension, brakes, heating, air conditioning, exhaust systems, and more, according to skill and certifications, that meet dealership and manufacturer standardsKeep shop area neat, clean, and account for dealership-owned toolsRequirements - Experienced Automotive Technician:Required: Automotive repair technician experience, KIA experience is preferredCertified techs are preferredMust be versatile in skills and tasks performedExperience with the latest automotive technologies and shop equipmentA positive attitude, good work ethic, and problem-solving skillsGood communication and customer service skills; team participantValid driver's license and insurableWe are an Equal Opportunity Employer.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. This is a Second shift position: Monday to Friday from 4:30 pm to 3:30 am. Hires are Eligible for a $2500 dollar sign on bonus! Responsibilities: Operating HBM (Horizontal Boring Mill), Machine, VTL or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them. Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: 5+ years relevant experienceOperating HBM (Horizontal Boring Mill), Machine, VTL Preferred Experience / Skills: High School Diploma/GEDVerbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work.Equipment Experience – machining experience in a manufacturing or repair environment operating manual lathes, milling machines, or CNC lathes/mills. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-14537 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Company Name: ARS-Rescue Rooter Overview: Pay: $80-120k (Performance Pay Based)Earning potential over $100K/year based on performanceSchedule: FT-Weekend AvailibiltyFull-time, year-round workJoin ARS, the nation’s largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience.What We Offer:Insurance available after 31 daysLow-cost medical (as low as $5/week)Dental, vision, HSA/FSA401(k) with company match13 days PTO + 8 paid holidaysCompany-paid life insuranceTake-home vehicle + gas cardUniforms + cleaning serviceWeekly direct deposit Responsibilities: Troubleshoot, service, and repair residential HVAC systems with the support of full training, professional tools, and a strong leadership network. Qualifications: What You Need:3 years of residential HVAC Service experience is required.EPA certification (or ability to obtain)Valid driver’s license & clean driving recordMust pass background and drug screeningAbility to enter attics, crawlspaces, and lifting heavy equipmentIf you have the experience we seek, APPLY NOWNote: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

In our tuition-free Tech Fundamentals program, you will master the basics of IT with real-world applications. What’s Included in Tech Fundamentals - Up to 20 weeks of instructor-led virtual training - Opportunity for a paid internship or a project-based learning experience - Opportunity to earn industry-recognized certifications: CompTIA A+ & IT Fundamentals+, a Google IT Support Certificate, and an IT Generalist Apprenticeship credential - Exposure to Microsoft, Cisco, AWS, and other leading technologies - Mentoring from senior-level IT professionals - Employment readiness workshops - Job placement assistance with access to a wide range of top employers - A full range of ongoing social service and personal development support Who is Eligible Young Adults - 18–26 years of ageHigh school diploma or equivalent - Legally authorized to work in the US - Located in or near the following cities:Baltimore, Brooklyn/New York City, Dallas, San Antonio, Houston, Detroit, Newark, St. Louis, Kansas City, Raleigh, Dayton Military Veterans and Military Spouses - Over 21 years of age - Legally authorized to work in the US - Must be one of the following: Transitioning active-duty service member through the DoD SkillBridge program / honorably discharged / member of the Guard or Reserves - In or near the following cities: Baltimore, Dallas, San Antonio, Houston, Detroit, Newark, St. Louis, Kansas City, Raleigh, Dayton

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. Must have Horizontal boring machine experience (HBM) This will be a 2nd shift opportunity; Overtime may be required. Hires are Eligible for a $2500 sign on bonus Responsibilities: Operating CNC Machines, BMH, Manual Machines, CNC Lathe, VTL, HBMOperating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating CNC Machines, manual lathes, milling machines.HS Diploma / GED and 3-5 years relevant experienceExperience operating LARGE machinesHBM Machine, tooling for Line Boring Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-14270 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Company Name: ARS-Rescue Rooter Overview: Pay: $80-120k (Performance Pay Based)Earning potential over $100K/year based on performanceSchedule: FT-Weekend AvailibiltyFull-time, year-round workJoin ARS, the nation’s largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience.What We Offer:Insurance available after 31 daysLow-cost medical (as low as $5/week)Dental, vision, HSA/FSA401(k) with company match13 days PTO + 8 paid holidaysCompany-paid life insuranceTake-home vehicle + gas cardUniforms + cleaning serviceWeekly direct deposit Responsibilities: Troubleshoot, service, and repair residential HVAC systems with the support of full training, professional tools, and a strong leadership network. Qualifications: What You Need:3 years of residential HVAC Service experience is required.EPA certification (or ability to obtain)Valid driver’s license & clean driving recordMust pass background and drug screeningAbility to enter attics, crawlspaces, and lifting heavy equipmentIf you have the experience we seek, APPLY NOWNote: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Machinist will operate a manual lathe and manual mill to machine stainless steel parts and components of flow control valves. The machinist will verify the quality of finished work with precision measurement tools. The Machinist will also operate a VTL. This is a second Shift position: Monday-Friday,4:00pm - 1:00amwith possible overtime during the week or weekend. Responsibilities & Requirements: Inspect first articles and verify the quality of the finished work by using precision measurement tools and demonstrating an in-depth understanding of specifications and quality workmanship.Meet production goals relating to efficiency, schedules, and scrap/rework.Clean and maintain machines and tools and keep an organized workspace.Apply an understanding of the process flow of documents, materials, and parts through the manufacturing process.Work closely with other machinists to discuss and solve problems relating to repairs and equipment.Collaborate with machine shop lead to discuss work-in-progress Preferred Experience / Skills: Experience operating manual lathes and mills (5+ years); Vertical Turning LatheExpertise required in machining 300-series stainless steel and other materials such as Hastelloy C276, Monel 400, Inconel, iron nickel and high chrome alloys.Working knowledge of machine tooling and processing requiredSkill required in using and interpreting precision measuring instruments.Strong blueprint reading skills requiredPersonal commitment to quality workmanship, with an ability to assess and explain quality concern to othersAble to accurately and consistently follow detailed procedures in order.An eye for detail to check drawings, part numbers, and materials, and to correctly complete routers and other paperwork.Work collaboratively as part of a team, showing a professional attitude and a service-oriented mindset in a fast-paced, flexible environment.Demonstrated track record of reliable, on-time attendance, able to work overtime and weekends as required.Standing for long times required, repetitive arm motions, frequent lifting of 25 lbs with occasional lifting up to 50 pounds.Must be able to complete math problems quickly and accurately.High School diploma or equivalent. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-13316 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Company Name: ARS-Rescue Rooter Overview: Pay: $80-120k (Performance Pay Based)Earning potential over $100K/year based on performanceSchedule: FT-Weekend AvailibiltyFull-time, year-round workJoin ARS, the nation’s largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience.What We Offer:Insurance available after 31 daysLow-cost medical (as low as $5/week)Dental, vision, HSA/FSA401(k) with company match13 days PTO + 8 paid holidaysCompany-paid life insuranceTake-home vehicle + gas cardUniforms + cleaning serviceWeekly direct deposit Responsibilities: Troubleshoot, service, and repair residential HVAC systems with the support of full training, professional tools, and a strong leadership network. Qualifications: What You Need:3 years of residential HVAC Service experience is required.EPA certification (or ability to obtain)Valid driver’s license & clean driving recordMust pass background and drug screeningAbility to enter attics, crawlspaces, and lifting heavy equipmentIf you have the experience we seek, APPLY NOWNote: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will operate a lathe to machine parts and components for flow control valves, including shafts, plugs, seat ring, seat retainers, bodiesetc. The machinist will verify the quality of finished work with precision measurement tools (caliper, micrometer, bore gaugeetc). This is a second Shift position: Monday-Friday 4:00pm – 1:00am, including opportunity to work OT. Sometimes Saturdays and Sundays if the workload requires. Responsibilities & Requirements: Inspect first articles and verify the quality of the finished work by using precision measurement tools and demonstrating an in-depth understanding of specifications and quality workmanship.Meet production goals relating to efficiency, schedules, and scrap/rework.Clean and maintain machines and tools and keep an organized workspace.Apply an understanding of the process flow of documents, materials, and parts through the manufacturing process.Work closely with other machinists to discuss and solve problems relating to repairs and equipment.Collaborate with inventory workers and engineers to status and discuss work-in-progress Preferred Experience / Skills: 5+ Years min experience on CNC machines; able to Mazatrol; Fanuc Control.Experience operating manual mills and lathes is a plus.Expertise required in machining 300-series stainless steel and other materials such as Hastelloy C276, Monel 400, iron nickel and high chrome alloys.Working knowledge of machine tooling and processing requiredSkill required in using and interpreting precision measuring instruments.Strong blueprint reading skills requiredPersonal commitment to quality workmanship, with an ability to assess and explain quality concern to othersAble to accurately and consistently follow detailed procedures in order.An eye for detail to check drawings, part numbers, and materials, and to correctly complete routers and other paperwork.Work collaboratively as part of a team, showing a professional attitude and a service-oriented mindset in a fast-paced, flexible environment.Demonstrated track record of reliable, on-time attendance, able to work overtime and weekends as required.Standing for long times required, repetitive arm motions, frequent lifting of 25 lbs with occasional lifting up to 50 pounds.Must be able to complete math problems quickly and accurately.High School diploma or equivalent. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-13315 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Company Name: ARS-Rescue Rooter Overview: Pay: $80-120k (Performance Pay Based)Earning potential over $100K/year based on performanceSchedule: FT-Weekend AvailibiltyFull-time, year-round workJoin ARS, the nation’s largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience.What We Offer:Insurance available after 31 daysLow-cost medical (as low as $5/week)Dental, vision, HSA/FSA401(k) with company match13 days PTO + 8 paid holidaysCompany-paid life insuranceTake-home vehicle + gas cardUniforms + cleaning serviceWeekly direct deposit Responsibilities: Troubleshoot, service, and repair residential HVAC systems with the support of full training, professional tools, and a strong leadership network. Qualifications: What You Need:3 years of residential HVAC Service experience is required.EPA certification (or ability to obtain)Valid driver’s license & clean driving recordMust pass background and drug screeningAbility to enter attics, crawlspaces, and lifting heavy equipmentIf you have the experience we seek, APPLY NOWNote: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Customer Product Repair Mechanic is responsible for all processes related to disassembly, repair, and assembly of pumps, including but not limited to rotating equipment, of high energy electric actuators, pumps, small compressors, and decoking equipment. The CPRM will work with team leaders to execute work as provided on work instructions, routers, drawings, and checklists. The CPRM independently selects and uses inspection equipment to check dimensions of all critical components during the assembly and repair process and gives a written description of the wear and condition of critical components. This position also ensures all forms and documentation are complete prior to submission of quotation. The CPRM will also be responsible for painting, installing all tagging, and prep the equipment prior to shipment to the customer. This could be a First shift or Second shift(6:00am-2:30pm) OR (4:30pm-1:00am)Monday-Friday. Overtime required when necessary. Responsibilities & Requirements: Follow pre-job brief, Return Goods Policies, and checklists prior to DCI and assembly.Responsible for the dismantle, clean, and inspect processes of all pumps (repair or upgrade) and decoking equipment.Ability to independently inspect, repair, and assemble components and equipment, and accurately complete all required documentation.Take pictures of the DCI process as instructed on the DCI checklist; properly clean each component for reuse and write the condition of components on all DCI documentation.Interface with service coordinator, production planners, and customer to discuss the condition of all critical components when applicable.Follow all routers and assembly procedures.Inspect all components for critical fits and run-outs and document each number on the appropriate assembly form.Take pictures of the assembly process as instructed on the assembly check list.Significant experience with the proper and safe use of various common power and hand tools needed for assembly.Utilize torches (and other heat sources) and liquid nitrogen properly and safely in the assembly process.Run balance machine to proper balance rotating components and assemblies.Conduct low pressure air tests and high-pressure hydrostatic tests.Inspect and verify the quality of finished and in-process work with precision measurement tools (i. e. micrometers, dial indicators, calipers, etc.).Accurately set up and read precision measuring instruments such as micrometers, dial indicators, calipers, and other gauges.Ability to work efficiently within fixed time windows for each manufacturing process.Communicate clearly to peers and supervisors any related job issues.- Coordinate and interface with sales, operations, engineers, and customers as necessary.Paint when required, tag, and prep equipment prior to shipment to the customer.Utilize cranes, lifting devices, and fork trucks.Willing to provide input on work process improvement and on developing new tools and hardware as part of on-going Continuous Improvement projects.Work safely while helping colleagues work safely and utilize Stop Work Authority when appropriate.Ability to understand work instructions, safety procedures, and company policies Comply with all Flowserve policies and procedures.Must own set of personal SAE hand tools and measurement instruments (micrometers, dial indicators, calipers, etc.) and a roll-around toolbox. Able to read and interpret prints, shop drawings, assembly checklists, and other written work instructions.Basic computer skills including understanding of Microsoft Office PackageAbility to prioritize and manage multiple tasks in a fast-paced and changing work environment.Attention to detail and process-oriented mindset with results driven background.Electrical wiring experience or mechanical assembly experience Must be able to stand for long periods of time and lift up to 25 pounds with a full range of hand and upper-body motion to work with tools and parts.Must be able to work overtime, weekends, and holidays as the business dictates.Other duties as assigned. Preferred Experience / Skills: Experience with dismantling, cleaning, and inspecting pumps (repair or upgrade) and decoking equipment.Excellent communication skills both written and verbal.Excellent organizational skills, able to solve problems, and prioritize work assignments.Prior experience working in the fast-paced and unpredictable environment around repair servicesDemonstrate a desire for personal growth and career development.HS Diploma / GED and 3-5 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-15100 Job Family Group : Operations Job Family : OP Repair Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Company Name: ARS-Rescue Rooter Overview: American Residential Services is the largest provider of residential services in the US, employing more than 7000 professionals across the country. ARS has been serving its customers with HVAC, Plumbing and Electrical solutions for over 45 years since its establishment in 1975.Check out what we offer:Access to insurance available at 31 days of employmentLow-cost Medical Insurance options, starting at $5 per weekDental and Vision Insurance optionsHealth Savings Account or Flexible Spending Account401(k) with company matchHSA and Flexible Spending AccountPaid Time Off & Holiday PayCompany paid life insuranceLearn more by visiting www.myarsrewards.com/ Responsibilities: At ARS, the value of your customer service delivery will never go unnoticed, the opportunity for career advancement is abundant and the income potential is high! As an AOR / HVAC Installation Mechanic, you would disassemble and remove old systems, then install, start-up and troubleshoot (if needed) new replacement HVAC systems in residential settings.Installers can expect:Year-round full-time work. Competitive pay options based on your skill and availability. Paid orientation, paid training, and weekly direct deposit payroll. NO On-Call, NO Overnight work and Flexible Shift Schedules available at most locations. Fully Stocked, Take Home company vehicle and gas card.Professional uniform and cleaning service.Comprehensive Training Opportunities provided by in-house Learning & Development team.Training including but not limited to technical, sales, safety, leadership, systems training.National Network to support professional growth & development and provide transfer opportunities.As the employer of choice, we offer an Industry-Leading Benefit Package:Choose from one of FOUR health insurance options, starting as low as $5 per week!HSA (Health Savings Account) and annual company contribution for specific plans. FSA (Flexible Spending Account) for specific plans. Dental and Vision Insurance options. 401(k) with weekly match contribution13 PTO Days + 8 Paid HolidaysCompany-paid life insurance policy, Short-term disability, long-term disability (additional life insurance options are also available)Discount Programs with our partnered accounts (Childcare, Personal cell phone, auto, insurance, etc.) Qualifications: At least 3 years of RESIDENTIAL HVAC Installation experience.Comfortable in a Lead role with a Helper assigned.Working knowledge of local inspection codes.EPA Certification (Certification assistance may be available).A proven work ethic with excellent customer service and communication skills.Willingness to go into attics, crawl spaces and lift heavy objects on a regular basis. Willingness to put in long, sporadic hours and/or weekends when necessary.All candidates are required to undergo pre-employment drug screen, background checks and must have a valid driver’s license with good driving record.*This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. **Sign-On Bonuses may be available; amountsare depending on experience and will be paid out according to an offer letter addendum. American Residential Services provides equal employment opportunities to all individuals, both applicants and employees, without regard to race, color, religion, pregnancy, gender, marital status, national origin or ancestry, citizenship status, disability, medical condition, genetic characteristics or genetic information, age, military service or veteran status, or any other characteristic protected by applicable federal, state, or local laws prohibiting discrimination. For more information about how we collect and use personal information, see our privacy policy here: https://www.ars.com/privacy-policy.

Company Name: ARS-Rescue Rooter Overview: Pay: $80-120k (Performance Pay Based)Earning potential over $100K/year based on performanceSchedule: FT-Weekend AvailibiltyFull-time, year-round workJoin ARS, the nation’s largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience.What We Offer:Insurance available after 31 daysLow-cost medical (as low as $5/week)Dental, vision, HSA/FSA401(k) with company match13 days PTO + 8 paid holidaysCompany-paid life insuranceTake-home vehicle + gas cardUniforms + cleaning serviceWeekly direct deposit Responsibilities: Troubleshoot, service, and repair residential HVAC systems with the support of full training, professional tools, and a strong leadership network. Qualifications: What You Need:3 years of residential HVAC Service experience is required.EPA certification (or ability to obtain)Valid driver’s license & clean driving recordMust pass background and drug screeningAbility to enter attics, crawlspaces, and lifting heavy equipmentIf you have the experience we seek, APPLY NOWNote: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Company Name: ARS-Rescue Rooter Overview: Pay: $80-120k (Performance Pay Based)Earning potential over $100K/year based on performanceSchedule: FT-Weekend AvailibiltyFull-time, year-round workJoin ARS, the nation’s largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience.What We Offer:Insurance available after 31 daysLow-cost medical (as low as $5/week)Dental, vision, HSA/FSA401(k) with company match13 days PTO + 8 paid holidaysCompany-paid life insuranceTake-home vehicle + gas cardUniforms + cleaning serviceWeekly direct deposit Responsibilities: Troubleshoot, service, and repair residential HVAC systems with the support of full training, professional tools, and a strong leadership network. Qualifications: What You Need:3 years of residential HVAC Service experience is required.EPA certification (or ability to obtain)Valid driver’s license & clean driving recordMust pass background and drug screeningAbility to enter attics, crawlspaces, and lifting heavy equipmentIf you have the experience we seek, APPLY NOWNote: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Company Name: ARS-Rescue Rooter Overview: Pay: $70-90k (Performance Pay)Earning potential over $100K/year based on performanceSchedule: FT-Weekend AvailibilityFull-time, year-round workJoin ARS, the nation’s largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience.What We Offer:Insurance available after 31 daysLow-cost medical (as low as $5/week)Dental, vision, HSA/FSA401(k) with company match13 days PTO + 8 paid holidaysCompany-paid life insuranceTake-home vehicle + gas cardUniforms + cleaning serviceWeekly direct depositOngoing training and career advancement Responsibilities: Disassemble and remove outdated HVAC systems, then install, start up, and troubleshoot new residential HVAC systems. Lead each install with the support of an assigned helper and operate with professionalism, precision, and efficiency. Qualifications: What You Need:At least 2 years of residential HVAC installation experienceComfortable leading installs with a helper assignedWorking knowledge of local inspection codesEPA certification (or willingness to obtain)Ability to lift heavy equipment and access attics/crawlspacesStrong communication and customer service skillsMust pass background check and drug screenValid driver’s license with good driving recordIf you have the experience we seek, APPLY NOWNote: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Company Name: ARS-Rescue Rooter Overview: Pay: $80-120k (Performance Pay Based)Earning potential over $100K/year based on performanceSchedule: FT-Weekend AvailibiltyFull-time, year-round workJoin ARS, the nation’s largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience.What We Offer:Insurance available after 31 daysLow-cost medical (as low as $5/week)Dental, vision, HSA/FSA401(k) with company match13 days PTO + 8 paid holidaysCompany-paid life insuranceTake-home vehicle + gas cardUniforms + cleaning serviceWeekly direct deposit Responsibilities: Troubleshoot, service, and repair residential HVAC systems with the support of full training, professional tools, and a strong leadership network. Qualifications: What You Need:3 years of residential HVAC Service experience is required.EPA certification (or ability to obtain)Valid driver’s license & clean driving recordMust pass background and drug screeningAbility to enter attics, crawlspaces, and lifting heavy equipmentIf you have the experience we seek, APPLY NOWNote: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.