RoadSafe is looking for a Traffic Control Technician 2 (TCT) to join our team!
The TCT must maintain a safe work zone that ensures that traffic stays out of the way of the workers. This involves setting up and removing temporary cones, signs, variable message boards, and safety barriers that show traffic where to drive, as well as holding up signs that tells traffic to either stop or to proceed slowly. Traffic-control technicians must be constantly aware of both the construction and traffic activity taking place around them. May be asked to lead job site team and instruct/monitor and train crew members on safety and job duties and responsibilities and report to the Traffic Control Supervisor.
Support project as Flagger as needed to create a safe work area. Set-up signs, cones, etc. around work areas to divert traffic Follow all safety rules and regulations and wear proper safety equipment ( work boots - 6 inch with safety toe, hard hat and safety vest) Adhere to all Company Policies and Procedures Complete daily paperwork accurately Work well in a team environment Provide highest level of customer service to all customers Must be able to lead job site team and instruct/monitor and train crew members on safety and job assignments. Must be able to communicate to contractor employees, co-workers and supervisors effectively and manage truck inventory and job site materials and paperwork Excellent attendance required, dependable transportation, good work ethic All other duties as assigned
Benefits: $1500 Sign on Bonus Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer
Qualifications: Pass a drug test Must be able to speak and read English. Must have a valid Driver’s license Ability to participate and pass Company sponsored Flagger Certification 2000 hours and/or 1 year of Traffic Control experience Must have or be able to obtain an ATSSA TCT Certification ATSSA TCT Certification needed if under 2,000 hours of service subject to state/local requirements. TMA Certified or the ability to pass TMA certification course Successfully pass Company provided Defensive Driver Training
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Dealing with traveling public effectively Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

RoadSafe is looking for Flaggers to join our team!
$1500 Sign On Bonus
Work with the Traffic Control Department at work sites to direct motorists by flagging them away from worker activities, moving equipment, oncoming traffic and perform duties listed below:
Set-up signs, cones, etc. around work areas to divert traffic Follow all safety rules and regulations and wear proper safety equipment (work boots – 6 inch with safety toe, hard hat and safety vest) Without Supervision must be able to set up and perform flagger position at job site based on site plan and or contractor directions Adhere to all Company Policies and Procedures Generally works under the Supervision of Project Manager, TCT, TCS, or Flagger II or maybe assigned to work independently Complete daily paperwork accurately and timely Operate 2 way radio Work well in a team environment Provide highest level of customer service to all customers Excellent attendance required, dependable transportation, good work ethic All other duties as assigned
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer
Qualifications: Driver’s license required Pass a drug test High School Diploma or GED Experience in Flagging/Traffic Control is preferred, but we offer training Hold a current Flagger certification or the ability to pass Company sponsored Flagger Certification Ability to lead a small crew Successfully pass Company sponsored Defensive Driver training
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Driven by our Purpose, we are committed to building a more sustainable future to make the world better for everyone. With more than 16,000 employees in more than 50 countries, we combine our global reach with local presence. We support more than 10,000 customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. Join a company where the people challenge themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. You will be part of a team known for its industry-leading talent, unparalleled portfolio, and unmatched commitment to customer success. Flowserve’s culture promotes recognition and rewards creativity, hard work, and commitment. We invite you to put your talents and career in motion at Flowserve. Our Taneytown, MD Pump Manufacturing facility is over 150,000 square feet and provides capability for engineering, design, customer service, machining, assembly, and testing for a diverse product portfolio, which serves all markets (power, oil & gas, water resources, general industry, and chemical). The facility has expanded four times since opening in 1971 to accommodate revenue growth and product line developments. The entire project lifecycle is experienced all under the same roof. Role Summary: Flowserve is looking for a Machinist at our manufacturing facility in Taneytown, MD. The candidate should be proficient in the set-up and operation of manual lathes, with exposure to CNC. The ideal candidate will have extensive knowledge of the general manufacturing environment to include, able to work safely, able to machine tolerances +/- .001, precision tool grinding, the use of overhead jib cranes, ergonomics, and inspection equipment. This machinist position requires self-inspection of parts, able to use trigonometry to find dimensions, understanding of geometric tolerancing, and being able to work in a safe and efficient manner. 2nd shift: Mon - Thur 3:30 pm - 2:00 am - 5% Differential Responsibilities: Machinist with experience running castings on manual and CNC machines.Maintain clean and well-organized work area at all times while maintaining all tooling and machinery for efficient and safe operation.Accurately machine to within a +/- .001 tolerance and familiar with prints with geometric tolerances.Comfortable with all types of precision measuring equipment and working in English and Metric systems.Experienced with jib and overhead cranes lifting large castings.Understand and operate machines, tooling, and measuring equipment properly and safely.Adhere to all Safety Procedures & Policy. Complete all Pure Safety and other safety training as required. Requirements: 2+ years machining experience in a manufacturing or repair environment operating manual lathes, milling machines, or CNC lathes/mills.Experience in using and interpreting precision measuring instruments, such as micrometers, dial indicators, and depth gaugesDemonstrated ability to read and interpret blueprints, geometric tolerances, and finishes during the application of machining.Ability to work in a team oriented and CIP environmentAbility to read and interpret instructions and drawingsAbility to follow complex verbal and written instructionsAble to stand for long periods, repetitive arm motions, frequent lifting with occasional lifting up to 50 lbs.Ability to work overtime as requiredHigh School Diploma or GED or 3-5 relevant years of experience in lieu of education Preferred: Machinist certification, training or degree related to machining is a plus.Experience in high mix, low volume manufacturing environmentForklift certification Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-9530 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Flowserve es un fabricante lder mundial y proveedor de servicios posventa de sistemas integrales de control de caudal. Impulsados por nuestro Propsito, nos comprometemos a construir un futuro ms sostenible para hacer un mundo mejor para todos. Con ms de 16.000 empleados en ms de 50 pases, combinamos nuestro alcance global con la presencia local. Apoyamos a ms de 10.000 clientes en todo el mundo, creando productos para satisfacer las necesidades de nuestros clientes que suministran energa, agua potable, productos farmacuticos y otros productos esenciales a consumidores, empresas y gobiernos de todo el mundo. nase a una empresa donde la gente se reta a s misma a abordar cada situacin con ingenio y creatividad para ayudar a proporcionar a nuestros clientes los productos y servicios de control de flujo ms innovadores. Formars parte de un equipo conocido por su talento lder en la industria, una cartera sin igual y un compromiso incomparable con el xito del cliente. La cultura de Flowserve promueve el reconocimiento y recompensa la creatividad, el trabajo duro y el compromiso. Le invitamos a poner sus talentos y su carrera en movimiento en Flowserve. Nuestras instalaciones de fabricacin de bombas de Taneytown, MD, ocupan ms de 150.000 pies cuadrados y ofrecen capacidad de ingeniera, diseo, servicio al cliente, mecanizado, montaje y pruebas para una cartera de productos diversa, que sirve a todos los mercados (energa, petrleo y gas, recursos hdricos, industria general y qumica). Las instalaciones se han ampliado cuatro veces desde su apertura en 1971 para dar cabida al crecimiento de los ingresos y al desarrollo de lneas de productos. Todo el ciclo de vida del proyecto se desarrolla bajo el mismo techo. Resumen del rol: Flowserve est buscando un Maquinista en nuestras instalaciones de fabricacin en Taneytown, MD. El candidato debe ser competente en la configuracin y operacin de tornos manuales, con exposicin a CNC. El candidato ideal tendr amplios conocimientos del entorno de fabricacin en general para incluir, capaz de trabajar con seguridad, capaz de mecanizar tolerancias +/- .001, rectificado de herramientas de precisin, el uso de puentes gra, ergonoma y equipos de inspeccin. Este puesto de maquinista requiere la autoinspeccin de piezas, la capacidad de utilizar la trigonometra para encontrar dimensiones, la comprensin de las tolerancias geomtricas y la capacidad de trabajar de forma segura y eficiente. 2nd turno: Lunes - Viernes 3:30 pm - 2:00 am - 5% diferencial de turno Responsabilidades: Maquinista con experiencia en la ejecucin de piezas de fundicin en mquinas manuales y CNC. Mantener el rea de trabajo limpia y bien organizada en todo momento, manteniendo todas las herramientas y maquinaria para un funcionamiento eficiente y seguro. Mecanizado preciso con una tolerancia de +/- 0,001 y familiarizado con impresiones con tolerancias geomtricas. Se sentir cmodo con todo tipo de equipos de medicin de precisin y trabajar en los sistemas ingls y mtrico. Experiencia con plumas y puentes gra para levantar piezas de fundicin de gran tamao. Comprender y manejar mquinas, herramientas y equipos de medicin de forma adecuada y segura. Cumplir todos los procedimientos y polticas de seguridad. Completar todos los cursos de seguridad Pure Safety y otros cursos de seguridad que se requieran. Requisitos: Ms de 2 aos de experiencia en mecanizado en un entorno de fabricacin o reparacin manejando tornos manuales, fresadoras o tornos/fresadoras CNC. Experiencia en el uso e interpretacin de instrumentos de medicin de precisin, como micrmetros, relojes comparadores y medidores de profundidad. Capacidad demostrada para leer e interpretar planos, tolerancias geomtricas y acabados durante la aplicacin del mecanizado. Capacidad para trabajar en equipo y en un entorno CIP. Capacidad para leer e interpretar instrucciones y planos Capacidad para seguir instrucciones complejas verbales y escritas Capacidad para permanecer de pie durante periodos prolongados, movimientos repetitivos de los brazos, levantamiento frecuente con levantamiento ocasional de hasta 50 lbs. Capacidad para trabajar horas extras cuando sea necesario Diploma de escuela secundaria o GED o 3-5 aos de experiencia en lugar de la educacin Destrezas preferidas: Se valorar la certificacin, formacin o titulacin de maquinista relacionada con el mecanizado. Experiencia en un entorno de fabricacin de alta mezcla y bajo volumen Certificacin de carretilla elevadora Flowserve ofrece un salario competitivo, bonificaciones anuales, prestaciones mdicas desde el primer da, generosas vacaciones pagadas, das festivos pagados, 401(k) y muchas otras excelentes prestaciones. Req ID : R-9530

Why Guitar Center Heres just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assigned Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid jobrelated requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1ext. 2862 or by sending an email to .Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products

Perks for Working with NFI: Career training & development opportunitiesASE Certification reimbursement & assist with study materialsApprenticeship ProgramSign-On Bonus of $2,000 paid out within the first 90 days of employmentDedicated internal company fleetNFI maintains all major tools401(K) with company matchPTO accrued on day one of employment - estimated 13 days per yearPaid Holidays - 8 days per yearMedical, Dental, RX, Vision, Disability, & Life InsuranceParental Leave according to FMLA state guidelinesBoot Allowance ProgramUniform & all safety PPE providedSchedule:Sunday -Thursday, 2:30PM - 11PMPay:25 /hr, pay will be determined by experience and certificationsNFI Division: Fleet ServicesContact the team @

Overview: Hogan & Sons Tire and Auto - We are a multi-generational family business that provides a full-service solution for all of your automotive and repair needs. These can range from tire replacement and inspections to maintenance packages.The General Service Technician is responsible for conducting non-technical automotive service repairs such as oil changes, tire and wheel related services as well as driving customers, picking up parts, and maintaining the cleanliness of the shop as needed.Compensation: $15-$18 + CommissionsBenefits: Competitive Bi-Weekly Pay Tuition Reimbursement, up to $3,000 annually Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Health/Flexible Spending Account Employee Assistance Program Telemedicine Program Supplemental Critical Illness, Hospital and Accident Plans Life Insurance (Company paid) Short/Long Term Disability Health Savings and Flexible Spending Account 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Performs tire mounting/dismounting, wheel balance and tire rotation. Performs oil changes and other basic services at the direction of the Shop Manager or Store Manager. While performing basic services, observes general vehicle condition and points out any obvious needed repairs or safety concerns to the Shop Manager or Store Manager. Utilizes the company's Multi-point Inspection and/or Repair Order to properly document the vehicle condition. Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance. Safely transports customers to and from their place of residence or business using the company vehicle. Picks up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle. Operates company vehicle in a safe and courteous manner obeying all traffic laws. Conducts State Safety and Emission Inspections on vehicles in an ethical manner following all company and state guidelines. Follows all safety procedures and reports any concerns to the Shop Manager or Store Manager. The General Service Technician should also adhere to all company policies and procedures as outlined in the Employee Handbook.Qualifications: High School Diploma or equivalent A valid, clean driver's license, or obtain a valid drivers license within 30 days of hire date Possesses a general understanding of under the hood, mechanical and under carriage assemblies Ability to work a minimum of five days per week, including weekends Working Conditions and Physical Demands:The General Service Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The General Service Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently. Hear and speak Vision sufficient to detect color, depth, and re-focus Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.#bayard

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment If you are looking for a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent - no matter your background or experience. Wherever your confidence level is, we'll make sure you're trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That's why we do not require any experience in our service centers! It doesn't matter if you're a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE'LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings - Most locations close by 7pm Competitive pay set at $18.50 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within - 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount - 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#BA4201#

Build your best future with theJohnson ControlsteamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of theJohnson Controlsfamily and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaidvacation/holidays/sicktime-15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care –Available day oneEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out!:https://youtu.be/pdZMNrDJviYWhat you will doUnder general direction is responsible for the sale ofJohnson ControlsBE offerings to mechanical contractors, designers and consulting engineers. Promote theJohnson Controlsvalue proposition to construction community by providing business and technical solutions. Builds and runs long term customerrelationships/partnershipswith assigned accounts. Responsible for customer satisfaction and loyalty while working in conjunction with operations partners. Positions renewable service agreements as a foundation of run account relationships.How you will do itSells, with minimal direction, theJohnson Controlsofferings persuasively, persistently and confidently to all members of the construction community to include contractors, consultants and designers while reaching optimal profit levels. Focuses on all opportunities to allow the contractor to achieve business objectives. Runs multiple, ongoing opportunities. Sells, renews and expands renewable service agreements, including multi-year agreements, to both new and existing assigned customers.Builds partnering relationships with the owner construction community responsible for the decision-making process to drive the sale of Johnson Control offerings. Actively listens, probes and identifies concerns. Understands the customer's business cycle customer base. Demonstrates technical and business expertise and maintains a high level of credibility. Garners loyalty, trust and commitment from the customer.Seeks out, targets and initiates contact with multiple prospective customers in alignment with JCI strategy. Develops and maintains a network of industry contacts. Understands and uses the sales process outcomes as well as demonstrates evidence of advancing the sell. Shares technical knowledge plus business expertise with the customer to match the solution to the customer’s operational need and favorably positionJohnson Controls. Qualifies and assesses potential customers.Addresses customer's operational and environmental objectives, needs and requirements. Recommends solutions and links customer objectives to total value solution and competitive advantage. DifferentiatesJohnson Controlsservices and products from competitors by applying creativity, resourcefulness, and innovation in a valuable sales approach.Acts as the customer’s advocate in interactions withJohnson Controlsto ensure the customer acquires the best value fromJohnson Controlsofferings. Sets appropriate customer expectations onJohnson Controlsofferings. Participates in final project inspection. Ensures that the customer is trained and oriented to system operation and the value of services delivered.What we look forRequiredBachelor’s degree in business, engineering, or related team required.At least 1-3 years optimally selling HVAC or building automation system industry.Demonstrates a dedication to integrity and quality in business.Excellent initiative and interpersonal communications skills.Proven ability to influence the market at key levels.HIRING SALARY RANGE: $50K-$85K plus commission (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at https://www.johnsoncontrols.com/careersJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Clean HarborsLaurel , Marylandis looking for aMobile Diesel Mechanicto join their safety conscious team!This position will be responsible for routine maintenance, inspections, and repairing of all company fleet at branch locations throughout the area. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Competitive wages $29-34 an hour based on experience. Overtime paid after 40 hours at $43.50-$51 an hourComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching componentOpportunities for growth and development for all the stages of your careerAccess to company paid OEM certifications and trainings!Generous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and tooling Speak with a recruiter today to learn more!! Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times.Correct all equipment deficiencies and perform preventative maintenance on company owned equipment as prescribed by managementAbility to perform thorough inspection of equipment and identify unsatisfactory condition.Full compliance with mandatory PPE requirements during all work-related activities and tasksTravel to other locations to perform repairs and maintenance on equipment as requiredCompletes and submits all associated paperwork as required for tracking PM schedules.Maintain active light duty or DQ driver status as per mobile vehicle typePerforms other duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors business. What does it take to work for Clean Harbors High School diploma or equivalent required.Valid driver's license and clean driving record.1+ years prior experience working on heavy duty-trucks and equipment.Must be able to provide own basic tools.Willingness to travel within assigned territory up to 70%.Attention to detail.Strong communication skills.Ability to work flexible shifts including nights, weekends, and overtime as required.Ability to determine vehicle condition by conducting inspections, scheduled PM's and diagnostic tests; identifying worn and damaged parts & replacement as needed.Ability to pass a background, drug, and physical test upon hire. 40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. “2022 Top Company For Women To Work For in Transportation”

Make every paint job a masterpiece. Be a wizard. $5,000.00 sign on bonus being offered for this position. As a Paint Tech with Dent Wizard, you'll have unlimited earning potential and the ability to control your day as you deliver fast, flawless paint jobs that dazzle. We're hiring right now for a Paint Technician in Springfield, VA. Utilizing specific surface preparation, the latest spray equipment and proven painting techniques, you will inspect, prepare, blend and finish vehicle surfaces. Working at locations that may include automotive dealerships, rental agencies and auto auctions, you'll do everything from simple touch-ups to repairing paint damage. The Dent Wizard Difference Unlimited, uncapped earning potential based on commission: the harder you work, the more you can makeExcellent benefits, including medical, dental, vision, 401(k), paid vacation and moreOutstanding perks, including mobile phone, company vehicle, gas card and moreWe will fully equip you with the most current tools and suppliesIndependence to manage your day; no micromanagementGreat work/life balance that puts you in charge of your scheduleOn-the-job training in our computerized color matching systems and painting techniques from experienced paintersCertifications and advanced training with organizations like PPG and BASFDefined career path with five levels from Senior Technician to World-Class Technician, each with bonuses, perks and recognition What You Need to Succeed 3+ years of auto painting experienceVision abilities including close, distance and color vision, depth perception and ability to adjust focusGreat communication skills to interact with customers and build accountsManual dexterity for repetitive-motion tasksStrong work ethic, self-motivation and the ability to work independentlyToughness and grit to work outside in all kinds of weatherPhysical stamina to kneel, bend and squat, as well as lift up to 45 poundsValid driver's license and good driving recordThe compensation offered for this position will depend on qualifications, experience, and geographic location. This position is primarily paid on highly incentivized commission structure. The starting compensation is expected to be between $60,000 and $80,000 annually. We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). About Dent Wizard Dent Wizard is the nation's undisputed leader in automotive reconditioning services and vehicle protection products - and our success is the result of the great people who serve our customers. We're stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve. Apply Now!!!

Please review the job details below.At Maxar Intelligence, we unlock the promise of space intelligence to help governments and businesses solve problems on earth and beyond. Since humans first explored our solar system, we have been supporting space missions with our tools. Maxar Intelligence, partners with innovative businesses and more than 50 governments to monitor global change, deliver broadband communications and advance space operations with capabilities in Space Infrastructure and Earth Intelligence. Now is your chance to amplify your impact, working to support Maxar’s work in solving problems for the world’s most pressing challenges. We are hiring immediately for a Senior Facilities Technician to join our team in Herndon, VA.Responsibilities:Take direction from the Facility Manager for facility-related services.Perform all work in a professional manner paying close attention to safety, efficiency, and industrial maintenance standards.Focus on superb customer service and customer satisfaction.Comply with all OSHA, ADA and company safety policies.Understand the importance of aesthetics and the need to present a professional, highly functioning property.Utilize the work order system to receive assignments and record daily activity for tasks, assignments, and projects to ensure accurate metrics.Perform preventative maintenance, routine maintenance, and minor troubleshooting.Maintain clean and organized storage and work areas.Perform daily maintenance inspections and audits.Ensure that all tools are in good working condition and stored neatly and securely in the work area.Coordinate onsite access for vendors and contractors.Provide direct support for facilities projectsPerform general maintenance and non-maintenance dutiesOther duties as assignedLife with Us:There is a reason we boast awards like Best Employer, Best Place to work, Top employer, candidate experience winner. Our strength is in our people. Each team member makes a unique contributionto our collective mission. So, we recognize that with best-in-class benefits like:401KCareer growth opportunitiesFamily friendly benefits like maternity and paternity leave and adoption reimbursementProgram to help you grow like tuition reimbursement, hackathons, and career developmentStudent loan repaymentGenerous time offPlus everything you’d expect from a leading employer such as a matching and immediately vest Robust insurance coverage, medical, dental and vision, etc.Free gym in building with lockers and showersClose to the Silver Line MetroMinimum Requirements:Must be a U.S. Citizen and be willing and able to obtain a Secret security clearanceRequires a High School Diploma or GEDMust possess a valid driver’s license and have reliable transportation and be willing to use personal vehicle for occasional business needs.Ability to work on-site, in the office, M-F 40 hours per weekAbility to support on-call mission critical work, as scheduled.Ability to lift 60 poundsDemonstrated experience in using the Internet and Microsoft Office programs including MS Word, MS Excel, MS PowerPoint, MS OutlookPreferred Qualifications:Active security clearanceAbility to work within and help promote a team environmentWork with minimal supervisionEPA 608 CertificationAED, First Aid, CPR certifications#CJPost#LI-MG1#LI-AE1Our salary ranges are market-driven and set to allow for flexibility. Individual pay will be competitive based on a candidate’s unique set of knowledge, skills, and geographic diversity, with earnings potential commensurate with experience. The range for this position is:$22.69 - $37.81 hourly.Maxar employees must follow all applicable Maxar policies and COVID-19 requirements as well as those of Maxar customers and third parties. Individual job requirements may vary, and Maxar reserves the right to modify its policies and requirements as it deems appropriate in accordance with applicable law.Maxar Technologies values diversity in the workplace and is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Compensation: Starting at $24.00/hr. GuaranteedHourly Rate: $35.00/hr. (based on experience and certifications) 100% Paid Life InsuranceBenefits Include:Paid vacation and holidaysHealth InsuranceDental InsuranceVision InsuranceMatching 401(k)Paid on-the-job trainingLeadership development and coachingTuition reimbursement including technical certificationsSafety shoes offered through the companyReferral programEmployee discountQualifications: Must have/maintain VA State Safety Inspection LicenseMust have a valid driver's licenseReliable transportation to and from workHave effective interpersonal and oral communication skillsResponsibilities: Conducts State Safety Inspections on vehicles in an ethical manner, and following all Virginia State Police, Virginia DEQ, and company guidelinesObserves general vehicle condition while performing basic services, and reports any obvious repair needs or safety concerns to the Service ManagerMaintains shop cleanliness for a clean and inviting appearanceFollows all safety procedures and reports any concerns to the Service ManagerComply with established safety programs, including wearing protective eyewearAPPLY NOW! PM Lube, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against based upon disability.

About Hawx: Founded in 2013, Hawx Pest Control is a customer-centric and technology-driven company that is in the process of revolutionizing the pest control industry. As we embark on a period of rapid growth, we are adding ambitious, career-oriented team members. At Hawx we pride ourselves on our company culture. Not only are our team members treated with respect and competitively compensated; they also benefit from being part of a company that actively rewards employees for being team players while providing ample opportunity for personal and professional growth. We are hiring a confident, energetic and hardworking individual for a Pest Control Service Professional position. We welcome candidates from other hard-working blue-collar industries, such as construction, lawn care, landscaping, retail, grocery, sanitarians and other customer service-oriented backgrounds. You bring the right attitude and customer service experience, and we will provide the training to ensure your success! Pay $18 - $22 compensation rangeIncentives available through sales commissions, review incentives, performance & more Benefits Medical, dental, vision and life insurancePTO, Paid Holidays & 401KCompany vehicle, gas card and phone Duties Perform residential pest management service routes with the highest level of customer service and professionalismAddress and alleviate customer concerns and pest related issues by using integrated pest management strategiesComplete all duties required by a pest/mosquito/termite service professional: customer consultation, inspection, eliminate/identify conducive conditions and proper treatments.Maintain and care for company equipment, vehicle and gas card and other job-related items.Continually stay up to speed on latest industry trends and trainingUtilize handhelds for customer routing, billing and processing service orders Requirements High School Diploma or equivalentMust be 21 years or older w/ valid driver's licenseAble to lift at least 50 poundsPass required background check and drug screening and be authorized to work in the US Skills Ability to build rapport and positively engage and work with customersAbility to prioritize and multitaskPositive and professional demeanor - from attitude to appearanceExcellent written and verbal communicationEagerness to go above and beyond to address customer needsThrive and have interest to continually learnTeam playerAbility to fully complete tasks and responsibilities in a timely manner.Ability to follow directions and guidelines in accordance with best practices and protocolsCapable of respectfully working together with fellow technicians and branch managementComfortable with technologyAbility to think outside the box and apply creative problem-solving techniques Work location On the road - customer facingOutdoors through all four seasonsBranch location when necessary for training, product replenishment, etc. EEO:Hawx Services, LLC is an Equal Opportunity Employer committed to fostering an inclusive work environment with the most qualified employees. Both in our hiring process and in the experiences that our team members have as employees, Hawx is committed to diversity, equity, and inclusion. Accordingly, Hawx is committed to equal employment opportunity regardless of race, color, ancestry, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, sexual orientation, age, marital status, disability, gender identity, or veteran status.

AmeriPro Roofing, one of the largest residential roofing contractors in the nation is immediatelyHiringOutsideSales Representatives in the DMV area!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed departments for every stage of the job process, giving Outside Sales Representatives more time in their day! We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years!Outside Sales Representatives are instrumental in that growth!Compensation& Benefits for Outside Sales RepresentativesDraw advancement vs Commission (used as steady pay)Commission on approved sales (paid on collected revenue)$67,000 - $266,000 / yearVehicle allowance (provided for qualifying vehicles)Quarterly Bonus (based on revenue goals)Full Insurance Benefits (Health, Dental, Vision and Life)401K with 4% Employer MatchSales Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (to supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work summaries and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience (preferred)Must have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge (preferred)Previous experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#HP

Come be a part of something big! Smart Minds, Cool Jobs and Awesome Rewards! Fueled by innovation, talent and ambition, the Air Force Civilian Service (AFCS) is seeking civilian professionals prepared to deploy war-winning capabilities for the United States Air Force. The Air Force Civilian Service (AFCS) is looking for an Electrical Technician (WG-2805-10) to work at the 11th Civil Engineer Squadron located at Joint Base Anacostia-Bolling Air Force Base located in Washington D.C. In this position you will install, repair, troubleshoot, and maintain various electrical systems, controls, and equipment. This position can close at any time. Apply Now! Salary Range $33.61-39.26 Hourly AFCS Benefits: Paid Time Off - 11 Federal Holidays each year - 13 sick leave days earned per year (accumulative) Paid Vacation Time - 13-26 days per year based on length of employment Health Insurance - No waiting period to qualify for you and your family Retirement - Immediate coverage by the Federal Employees Retirement System (FERS) - Basic Benefits Plan - Social Security - Thrift Savings Plan (TSP), similar to a 401(k) (Automatically receive 1% agency contributions and up to 5% matching)1. U.S. Citizenship 2. Position requires the ability to discern colors and contrast. 3. Shift work may be required. 4. The work requires the employee to drive a motor vehicle. An appropriate, valid driver’s license will be required for the position. 5. This is a Mission Essential (ME) position performing a Mission Critical Function (MCF) which must continue uninterrupted after the occurrence of an emergency and continued through full resumption of all functions. IAW, DoDI 3020-42, Defense Continuity Programs. 6. Emergency overtime may be required. 7. May work with hazardous materials such as asbestos or accumulated waste. Employee will be required to wear protective clothing and gear on these occasions. 8. The physical requirements of this position as determined by the manager are: Makes repairs from work stands and other hard-to-reach places. Must stand, stoop, bend, kneel, climb, stretch, and work in tiring and uncomfortable positions. Frequently lifts parts and equipment that weigh up to 20 pounds. Occasionally lifts items that weigh over 40 pounds with assistance from other workers. 9. This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing. Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety. Duties and Responsibilities 1. Installs, repairs or replaces, modifies, loads, tests and performs preventative maintenance on new and existing electrical lines, circuits, systems, fixtures, panels, switches, breakers, and controls located in and near installation buildings and structures. Works on secondary distribution lines and circuits used to supply distribution panels, switchgears, power and control circuits, electrical intrusion alarm and fire alarm systems; emergency warning systems; cathodic protection systems; lightning protection systems; street and parking lot lighting; high intensity lighting systems; Light Emitting Diodes; and related equipment. Tests and maintains gasoline and diesel generators for proper electrical output. Trains and/or guides lower grade or lesser experienced employees as required. Will drive to and from various locations on base to perform duties. 2. Troubleshoots problem areas and inspects for defective equipment and faulty wiring. Works from building plans, blueprints, wiring diagrams, engineering drawings, and maintenance and repair manuals to determine the necessary and proper repairs and/or replacements. 3. Uses and maintains various types of hand and/or power tools, such as screwdrivers, pliers, wire cutters, soldering irons, cable pullers, hydraulic benders, and pipe threading machines. In addition, uses a wide variety of test equipment including test lamps, multimeters, circuit analyzers, circuit breaker testers, voltage recording meters, meggers, watt meters, ohmeters, and ammeters. 4. Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment. Uses and assures proper fit of required safety equipment and clothing. Knowledge, Skills, and Abilities (KSA’s) 1. Knowledge of safety regulations, National Electrical Code, National Fire Protection Association standards, practices, and procedures. 2. Knowledge of technical practices in order to plan, lay out, install, modify, troubleshoot, and repair a variety of complete electrical systems. 3. Knowledge of electrical and electronic theory and instruments used in shop and trade practices, and of electrical equipment, i.e., test lamps, multimeters, circuit analyzers, circuit breaker testers, voltage recording meters, meggers, watt meters, ohmeters, and ammeters. 4. Skill in using and maintaining hand tools such as, screwdrivers, pliers, wire cutters, strippers, cable pullers, drills, soldering irons, and manual or power conduit benders and threaders. 5. Skill in troubleshooting and tracing hard-to-locate defects or problems. 6. Ability to use electrical drawings, blueprints, engineering drawings, and wiring diagrams and to install, troubleshoot, repair, and maintain various electrical systems, controls, and equipment without more than normal supervision. Click the apply button to complete an application and upload resume (PDF or Word Doc) and/or additional documents (Transcripts, certifications, Vet Docs (DD214), SF-50). To receive additional information about current and future job openings with AFCS via email notification, please subscribe at www.Afciviliancareers.com and sign up to “Get Career Updates.” AFCS is Equal Opportunity Employer. U.S. citizenship required. Must be of legal working age.

Position Title: Service Technician (Commercial)Reports To: Field Supervisor or Branch ManagerStatus: Full-time, Regular positionCategory: TechnicianLocation Name: CroppMetcalfeLocation Address: 8421 Hilltop Rd, Fairfax, VA 22031Join the team of experts and realize your true potential!Why You Should Join the Service Experts Team Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT!Service Experts Company Perks and Benefits for YOUTop Pay for Top Performers, including incentive and bonus opportunities (depending on the position)Our Top Technicians earn over $80,000Generous PTO provided20 paid days off within your first year of employment (vacation, personal holidays, & national holidays)25 paid days off after your 2nd year of employmentNo layoffs during “Slow Season” – due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ample advancement and career-growth opportunities available across the U.S.Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programsWe provided wellness program options for free employee medicalCompany-provided smart phone, tablet, uniform plan, and tool replacement programWe’ll make you better at what you do with our internal Training AcademyBest-in-class 401(k) Retirement Savings Plan with attractive company matching contributionsCompany-paid employee Life Insurance with options for YOU and your Family!Short-term and Long-term disability insurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Position Summary:Under minimum supervision, performs diagnostic and service work on commercial (rooftop) HVAC equipment and accessories. Communicates with commercial customer to answer questions, resolve problems, and ensure complete customer satisfaction. Works under the direction of the Field Supervisor or Branch Manager.Key Responsibilities:Works under minimum supervision to perform commercial (rooftop) service and maintenance calls, following company and customer safety protocols.Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner.Diagnosis and performs service on commercial heating, air conditioning, boilers and associated equipment, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner.Inspects equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks.Completes routine maintenance and equipment cleaning as needed or required.Responsible for delivery and removal of parts and equipment needed to complete service work.Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner.Communicates with dispatch while on duty to ensure dispatcher has an accurate status report of activities and availability.Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction.Promotes products and services to the customer. Calls Lead Coordinator with specifics on replacement product sales leads generated from customer service visit.Ensures company property, vehicles, and tools are being used, maintained and properly accounted for.Represent our company professionally, honestly, and ethically in all business matters and activities.Following standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to branch, and orders/replenishes vehicle stock as needed.May train other commercial service/maintenance/install technicians, as assigned.Performs similar/other duties as needed or assigned.Regular, reliable attendance.Health & Safety Roles and Responsibilities:Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately.Reports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediately.Corrects substandard acts or conditions within area of control.Uses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s)Never removes or renders ineffective any safety guards, devices, or clothing prescribed to be in place or worn.Complies with the general rules as prescribed by company program(s) procedure(s)Operates devises or equipment as prescribed by company program(s) or procedure(s)Participates in any safety initiatives, teams, or committees.Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately.Provides input on developing safety initiatives and plans to eliminate exposures that could cause accidents.Does not perform act that may endanger the safety or wellbeing of othersDoes not engage in any pranks, contests, or rough boisterous behavior.Works in compliance with applicable legislative requirement.Desired Skills and Qualifications:High school diploma or GED with additional training and experience in all aspects of commercial HVAC with NATE certification preferred.Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area.Skilled at servicing commercial (rooftop) heating, air conditioning, boilers and associated equipment, and ventilation equipment as well as related accessories.Proficient mechanical aptitude and the ability to operate all necessary tools and equipment.Proficient and able to operate all necessary tools and equipment to perform various service projects.Proficient at reading wiring diagrams and troubleshoot problems with electrical, refrigerant, and duct systems on commercial HVAC equipment.Proficient and able to properly start up and balance airflow on all commercial systems with little or no supervision.Proficient and able to install a basic duct fitting.Skilled at troubleshooting and repairing refrigeration systems, hot water systems, steam boiler systems, and related commercial equipment with little or no supervision.Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns.Effective and efficient time-management and organizational skills.Valid driver’s license with acceptable driving record.Two years’ experience performing service and maintenance work on commercial HVAC equipment and related accessories.Available to work flexible hours and on-call shifts as needed.Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl.Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas.Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt.Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception.Ability to lift up to 50 pounds and ability to lift and carry items weighing up to 50 pounds.

Position Title: Install Helper (Residential/Light Commercial)Reports To: Field Supervisor or General Manageror Lead InstallerStatus: Full-time, Regular positionCategory: InstallationLocation Name: CroppMetcalfeLocation Address: 6649 Garland Dr. Unit #2, Warrenton, VA 20187Why You Should Join the Service Experts Team Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth.Join us and become an EXPERT!Service Experts Company Perks and Benefits for YOUTop Pay for Top Performers, including incentive and bonus opportunities (depending on the position)Our Top Technicians earn over $60,000Generous PTO provided20 paid days off within your first year of employment (vacation, personal holidays, & national holidays)25 paid days off after your 2nd year of employmentNo layoffs during “Slow Season” – due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ample advancement and career-growth opportunities available across the U.S.Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programsWe provided wellness program options for free employee medicalCompany-provided smart phone, tablet, uniform plan, and tool replacement programWe’ll make you better at what you do with our internal Training AcademyBest-in-class 401(k) Retirement Savings Plan with attractive company matching contributionsCompany-paid employee Life Insurance with options for YOU and your Family!Short-term and Long-term disability insurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Position Summary:Assists the Installer or Lead Installer in the installation of residential and/or light commercial HVAC equipment and accessories. Work is performed under direct supervision.Key Responsibilities: Works under direct supervision of the Installer or Lead Installer to install HVAC equipment and accessories in the customer’s homeAssists with the installation of heating, air conditioning, ventilation, and refrigeration equipment, as well as accessories, in accordance with company requirements and manufacturer specificationsAssists in the installation of ducts and duct fittingsPerforms duties so as to deliver of excellent customer service and sustain high levels of customer satisfactionAssists in the delivery and removal of equipment needed to complete the installation workAssists the Installer or Lead Installer in ensuring company property, vehicles, and tools are being properly used, maintained, and properly accounted forAs needed or required, completes all paperwork in a neat, accurate, thorough, and timely mannerRepresents the company professionally, honestly, and ethically in all business matters and concernsResponsible with the Installer for keeping installation vehicle clean and neat both inside and outside in keeping with the company’s professional imagePerforms similar/other duties as needed or assignedRegular, reliable attendanceHealth & Safety Roles and Responsibilities:Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately Reports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediately Corrects substandard acts or conditions within area of control Uses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s) Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or worn Complies with the general rules as prescribed by company program(s) procedure(s) Operates devises or equipment as prescribed by company program(s) or procedure(s) Participates in any safety initiatives, teams, or committees Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately Provides input on developing safety initiatives and plans to eliminate exposures that could cause accidents Does not perform act that may endanger the safety or well-being of others Does not engage in any pranks, contests, or rough boisterous behavior Works in compliance with applicable legislative requirement Desired Skills and Qualifications:High school diploma or GED with additional training and 0 to 2 years’ experience in HVAC with technical training certification preferredMust possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work areaEPA and safety certifications requiredBasic knowledge of the fundamentals of the operational functionality of heating, air conditioning, and ventilation equipment as well as related accessoriesMechanical aptitude and the ability to operate, or learn to operate, all necessary tools and equipmentBasic skills in reading wiring diagramsEffective communication skills to communicate with customer and to provide excellent customer serviceEffective and efficient time-management and organizational skillsValid driver’s license with acceptable driving recordAvailable to work flexible hours and on-call shifts as neededAbility to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawlAbility to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areasAbility to safely climb 300lb load capacity rated ladders with a 30lb tool beltNatural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perceptionAbility to lift up to 75 pounds and ability to lift and carry items weighing up to 50 pounds

Position Title: Service Technician (Residential/Light Commercial)Reports To: Field Supervisor or General ManagerStatus: Full-time, Regular positionCategory: TechnicianLocation Name: CroppMetcalfeLocation Address: 5301 Holland Dr, Beltsville, MD 20705Why You Should Join the Service Experts Team Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth.Join us and become an EXPERT!Service Experts Company Perks and Benefits for YOUTop Pay for Top Performers, including incentive and bonus opportunities (depending on the position)Our Top Technicians earn over $90,000Generous PTO provided20 paid days off within your first year of employment (vacation, personal holidays, & national holidays)25 paid days off after your 2nd year of employmentNo layoffs during “Slow Season” – due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ample advancement and career-growth opportunities available across the U.S.Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programsWe provided wellness program options for free employee medicalCompany-provided smart phone, tablet, uniform plan, and tool replacement programWe’ll make you better at what you do with our internal Training AcademyBest-in-class 401(k) Retirement Savings Plan with attractive company matching contributionsCompany-paid employee Life Insurance with options for YOU and your Family!Short-term and Long-term disability insurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Position Summary:Under minimal supervision, performs diagnostic and service work on residential and/or light commercial HVAC equipment and accessories. Communicates with customer to answer questions, resolves problems, and ensures complete customer satisfaction. Promotes products and services to customer. Works under the direction of the Field Supervisor or General Manager.Key Responsibilities: Works under minimal supervision to perform residential and/or light commercial service and maintenance calls Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks Completes routine maintenance and equipment cleaning as needed or required Responsible for delivery and removal of parts and equipment needed to complete service work Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer. Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit. Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for Represents the company professionally, honestly, and ethically in all business matters and activities Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed Performs similar/other duties as needed or assigned Regular, reliable attendanceHealth & Safety Roles and Responsibilities:Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately Reports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediately Corrects substandard acts or conditions within area of control Uses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s) Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or worn Complies with the general rules as prescribed by company program(s) procedure(s) Operates devises or equipment as prescribed by company program(s) or procedure(s) Participates in any safety initiatives, teams, or committees Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately Provides input on developing safety initiatives and plans to eliminate exposures that could cause accidents Does not perform act that may endanger the safety or well-being of others Does not engage in any pranks, contests, or rough boisterous behavior Works in compliance with applicable legislative requirement Desired Skills and Qualifications:High school diploma or GED with additional training and 2 to 5 years’ experience in HVAC with technical training certification required Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area EPA and safety certifications required Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories Proficient mechanical aptitude and the ability to operate all necessary tools and equipment Proficient and able to operate all necessary tools and equipment to perform various service projects Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision Proficient and able to install a basic duct fitting Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns Effective and efficient time-management and organizational skills Valid driver’s license with acceptable driving record Available to work flexible hours and on-call shifts as needed Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl. Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception Ability to lift up to 75 pounds and ability to lift and carry items weighing up to 50 pounds

Description Leidos is a FORTUNE 500 company bringing a mix of innovative technology and sector expertise to customers in the national security, engineering, and the health industries.Leidos is hiring a Test Engineer to work with a Government-Contractor team providing a near real-time, geospatially accurate Common Operating Picture (COP) to support mission requirements. This COP enables sharing and reuse of geospatial intelligence across multiple function areas in support of military operations. The Test Engineer will support systems responsible for processing, exploitation, and dissemination of multi- discipline and multi-sensor intelligence, mapping, and weather information to weapon system platforms and Warfighters.Primary ResponsibilitiesList daily duties and/or specific job responsibilities.Responsible for software verification and validation, including test planning, development, execution, analysis and associated documentation.Assists in the development of the test strategy in order to meet the release schedule.Coordinates testing activities, supports bug reporting and tracking and software test processes.Responsible for writing tests, executing those tests, and reporting the results.Initiates and analyzes problem reports and change proposals.Develops strong cooperative relationships with engineering and management teammates to achieve end-to-end product quality.Ensures that hardware/software under test implements the functionality specified in all approved requirement documents and that it performs as expected from the customers perspective.Must have knowledge of Government security policies and familiarity with security-related technologies and auditing tools. - Designs, constructs and implements manual and automated tests that thoroughly exercise the product from the perspective of the customer. - Assesses system and software level requirement specifications, software design, interface design, test, and other development related documentation as needed. - Assists with implementation of the enhancements, including documentation, instruction and hands-on- training of others.Basic Qualifications Bachelor's Degree (Computer science, Information systems, Engineering, business or related scientific or technical discipline) and 4 years of experience OR Master's Degree and 2 years of experience.4 years work experience, OR Associate's Degree plus 2 years of experience, may be substituted for a Bachelor's Degree.Preferred Qualifications Two years test and evaluation experience on DoD intelligence or command, control and communications programs/projects.Original Posting Date:2024-04-04While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $68,900.00 - $124,550.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

DIESEL MECHANIC Full-timeLocation: Landover, MDCompensation:First Year Earning Potential of $50k-$70k for well-experienced candidates! Coach USA has new and exciting career opportunities for Mechanics at our Landover, MD location. We are looking for a mechanic to repair and inspect company equipment in a cost effective, safe, timely manner.Responsibilities: Routine and preventative maintenanceDiagnose mechanical, electrical, and other breakdowns or failuresFamiliar with Cummins and Detroit EnginesFamiliar with ZF and Allison TransmissionsPrefer CDL License – Class B with P Endorsement What We Offer: First year earning potential of $50K-$75kFREEFREEFREEMEDICAL benefits to all single employees!* Full benefits package (medical, dental, vision, short term disability, Life insurance, 401K)Paid VacationDirect Deposit availableUnion Represented shopTool and uniform allowance for all new mechanics Qualifications: Formal technical training degree, certificate or diploma or equivalent work preferredPossess strong managerial and organizational skillsAbility to bend, stoop, crawl, walk and sit on a regular basis with frequent lifting of up to 50 pounds.Certifications will be accepted and reviewedDiesel experience preferredCDL preferred (not required!)additional pay offered to CDL holders with Passenger endorsementsEffective written and oral communication skills Have some experience on vehicle repairs Ask about our apprenticeship programs! Veterans are encouraged to apply!To learn more about your next big career change, APPLY NOW!Coach USA is an Equal Employment Opportunity employer. In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class.*Buy-up benefits for family/child/spouse

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily . WHAT WE OFFER We are a large company serving many unique customers - because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering: Ongoing Education & Training Exposure to a Large Variety of Projects Industry-leading Benefit Packages Advanced support and tools designed to improve your workflow Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time. Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers' expectations Provides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner. Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base. Test malfunctioning systems and components using electrical and/or mechanical skills. Maintain legible corporate and personal records of work history. Provides department support by processing job tickets, and work orders to the necessary department promptly. Provide support by picking up, delivering, and installing cases. Perform work on minor construction and remodeling projects including startups of new installations. Drives company vehicle in a safe manner. Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED. EPA certification. Certification from an accredited vocational-technical or trade school is a plus! Minimum 5+ years of commercial refrigeration experience required. Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus. Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. Must have a good driving record and be able to work independently. Emergency on-call availability is a basic requirement. Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Why Guitar Center Heres just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assigned Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid jobrelated requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1ext. 2862 or by sending an email to .Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products

Perks for Working with NFI: Career training & development opportunitiesASE Certification reimbursement & assist with study materialsApprenticeship ProgramSign-On Bonus of $2,000 paid out within the first 90 days of employmentDedicated internal company fleetNFI maintains all major tools401(K) with company matchPTO accrued on day one of employment - estimated 13 days per yearPaid Holidays - 8 days per yearMedical, Dental, RX, Vision, Disability, & Life InsuranceParental Leave according to FMLA state guidelinesBoot Allowance ProgramUniform & all safety PPE providedSchedule:Sunday -Thursday, 2:30PM - 11PMPay:25 /hr, pay will be determined by experience and certificationsNFI Division: Fleet ServicesContact the team @

Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Driven by our Purpose, we are committed to building a more sustainable future to make the world better for everyone. With more than 16,000 employees in more than 50 countries, we combine our global reach with local presence. We support more than 10,000 customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. Join a company where the people challenge themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. You will be part of a team known for its industry-leading talent, unparalleled portfolio, and unmatched commitment to customer success. Flowserve’s culture promotes recognition and rewards creativity, hard work, and commitment. We invite you to put your talents and career in motion at Flowserve. Our Taneytown, MD Pump Manufacturing facility is over 150,000 square feet and provides capability for engineering, design, customer service, machining, assembly, and testing for a diverse product portfolio, which serves all markets (power, oil & gas, water resources, general industry, and chemical). The facility has expanded four times since opening in 1971 to accommodate revenue growth and product line developments. The entire project lifecycle is experienced all under the same roof. Role Summary: The Painter will use paint application techniques and equipment to professionally finish exterior surfaces of assembled and unassembled pumps, values, parts, components to support facility as required. The Painter will prep product for painting, operate paint equipment, and paint product and/or components per operating procedures and instructions. This position regularly requires work near moving mechanical parts. It occasionally requires exposure to fumes or airborne particles and vibration. 1st Shift: Monday - Friday (6:30 am - 3:00 pm) Responsibilities: Review area of component/pump and determine quantity and application of paintBe able to mix paint and complete painting tasks according to the operation procedure.Safely prepare surfaces to be painted, which may include cleaning solvents and compressed airApply paint to exterior and interior surfaces as required using brushes and/or sprayersAdhere to safe work habits, rules, and practices, including the correct use of tools, machines, safety devices and equipment.Maintain cleanliness of paint equipment and perform necessary housekeeping and safety duties as required.Perform other duties assigned including willingness to move to other areas as needed.Responsible for quality of work performed; work efficiently and to required specifications with minimal supervision.Must wear safety protection according to company policy.Exhibit behaviors that contribute toward an environment that encourages teambuilding, decision making, problem-solving and continuous improvement.Read and understand both verbal and written instructions.Participate in CIP activities as required and comply with all Flowserve policies and procedures. Requirements: 2+ years’ experience in general mechanics or specialized training preferredAbility to read and interpret instructions and drawingsAbility to read and comprehend precision measuring equipmentAbility to use a wide variety of hand, power and air toolsAbility to follow complex verbal and written instructionsGood mechanical ability and manual dexterity is essential (able to stand for long periods of time)Ability to obtain respirator certificationMust be able to lift, push, or pull up to 50 lbsAbility to work overtime as requiredMust have a strong work ethic and be able to follow proper safety procedures and guidelines Preferred Skills: High School Diploma or GEDComputer skills preferred Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-9493 Job Family Group : Operations Job Family : OP Painting EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Overview: Hogan & Sons Tire and Auto - We are a multi-generational family business that provides a full-service solution for all of your automotive and repair needs. These can range from tire replacement and inspections to maintenance packages.The Jr Technician/ Mechanic is responsible for conducting non-technical automotive service repairs such as oil changes, tire and wheel related services as well as driving customers, picking up parts, and maintaining the cleanliness of the shop as needed.Compensation: $15-$18 + CommissionsBenefits: Competitive Bi-Weekly Pay Tuition Reimbursement, up to $3,000 annually Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Health/Flexible Spending Account Employee Assistance Program Telemedicine Program Supplemental Critical Illness, Hospital and Accident Plans Life Insurance (Company paid) Short/Long Term Disability Health Savings and Flexible Spending Account 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Performs tire mounting/dismounting, wheel balance and tire rotation. Performs oil changes and other basic services at the direction of the Shop Manager or Store Manager. While performing basic services, observes general vehicle condition and points out any obvious needed repairs or safety concerns to the Shop Manager or Store Manager. Utilizes the company's Multi-point Inspection and/or Repair Order to properly document the vehicle condition. Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance. Safely transports customers to and from their place of residence or business using the company vehicle. Picks up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle. Operates company vehicle in a safe and courteous manner obeying all traffic laws. Follows all safety procedures and reports any concerns to the Shop Manager or Store Manager. The Jr Technician/ Mechanic should also adhere to all company policies and procedures as outlined in the Employee Handbook.Qualifications: High School Diploma or equivalent A valid, clean driver's license Possesses a general understanding of under the hood, mechanical and under carriage assemblies Ability to work a minimum of five days per week, including weekends Working Conditions and Physical Demands:The Jr Technician/ Mechanic will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The Jr Technician/ Mechanic must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently. Hear and speak Vision sufficient to detect color, depth, and re-focus Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.#bayard

***Consideration given to applicants residing in or within a commutable distance from Waynesboro, PA***Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offer:Competitive salary Paid vacation/holidays/sick time- 15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care - Available day one!Encouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat you will do:Johnson Controls is developing the next generation of smart and connected. Through a full range of systems and digital solutions, we make buildings smarter. A smarter building is safer, more comfortable, more efficient, and, ultimately, more sustainable.As a Sr Mechanical Engineer, you will be a member of our custom product development team. In this role, you will have an influence on the conceptual development, mathematical analysis, detailed design, and overall performance of sophisticated refrigeration products and systems. As a recognized technical subject matter expert this role will also provide support to the salesforce, factory production, laboratory, service, applications, and marketing teams located globally. This position is not eligible for Visa sponsorship.How you will do it:Uses standard and sophisticated technical and mathematical principles, theories, concepts, techniques, processes, and standard methodologies in field Continuously researches equipment operation, materials, industrial processes, and manufacturing equipmentInvestigates and analyzes product design requirements and recommends optimum solutionsProficient in mechanical design and be able to conceptualize and implement design ideas into the productUtilizing mechanical engineering theory and methodologies such as heat transfer, fluid dynamics, failure analysis and refrigerationDevelop mathematical calculations and formulas using multiple variables, and analyze resultsEstablishes test criteria, participates in laboratory testing, and analyzes test data to identify chiller performance characteristicsWorks closely with the design and drafting group in generating product layout concepts and system configurationsResponsible for the on-time completion of projectsGenerates user documentationContinuously increases expertise on all aspects of product design, theory, construction, operation, and applicationsLearns and applies regulatory codes such as UL, ASME, and APIStrives for continuous improvement and teamwork in a global product development and process environmentWhat we look for:RequiredBachelor’s degree in Mechanical Engineering (ABET accredited)Minimum 5 years of applicable experience with compressors and/or rotating equipmentProficiency in Microsoft suite Applications (Work, Excel, Access and PowerPoint) as well as AutoCAD Preferred:Knowledge in SAP is a plusMaster's degree in mechanical engineering #LI-OnsiteJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Clean Harbors’ Asset Refurbishment Department inLaurel, Maryland is looking for a highly skilledHeavy-Duty Diesel Mechanicto add to their team. The Laurel, Maryland facility is a state-of-the-art facility specializing in repairing of Heavy Duty Diesel Trucks; including Vacuum Trucks, Tanker Trucks, Tractors and Straight Trucks. This position is known internally as aVehicle Maintenance Mechanic.Successful candidates will have:• 1+ years of experience working on Diesel Trucks• A strong mechanical aptitude• The ability to troubleshoot, diagnose and repair equipment and vehicles• The ability to disassemble trucks and repair components• The ability to inspect diagnose and repair electrical, hydraulic, suspension, brake and air systems• The ability to troubleshoot, diagnose and repair Diesel Engines, Differentials, Transmissions, Clutches, Drive Shafts, PTO’s and Pumps• Experience welding or fabricating parts a plus• Proficiency in electronic work orders• Computer skills required• Ability to drive company vehicle• Hours: Full-Time Day Shift Position Monday- Friday (overtime and Saturdays available)Why Work for Clean Harbors • Competitive wages $27-32 an hour based on experience. Overtime paid after 40 hours at $40.50-$48 an hour.• Full Benefit package• Paid Time Off• State of the Art Facility with Cutting Edge TechnologyClean Harbors is the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market.Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We offer competitive salaries and progressive benefits including health, dental, life insurance, 401K, generous paid time off, tuition reimbursement and more. We offer a drug free work environment and require a pre-employment drug screen. All Applicants are subject to pre-employment security background checks, and some positions may require pre-employment physical fitness for duty testsEmployment is contingent upon a successful background check and drug screen. Some positions also require a pre-hire medical exam. Must meet all work eligibility requirements. Environmentally-responsible business.We are an Equal Opportunity Employer and do not discriminate against applicants due to veterans status or on the basis of disability. Potential Applicants:We are an Equal Opportunity Employer and do not discriminate against applicants due to veterans status or on the basis of disability.

Make every paint job a masterpiece. Be a wizard. $5,000.00 sign on bonus being offered for this position. As a Paint Tech with Dent Wizard, you'll have unlimited earning potential and the ability to control your day as you deliver fast, flawless paint jobs that dazzle. We're hiring right now for a Paint Technician in Springfield, VA. Utilizing specific surface preparation, the latest spray equipment and proven painting techniques, you will inspect, prepare, blend and finish vehicle surfaces. Working at locations that may include automotive dealerships, rental agencies and auto auctions, you'll do everything from simple touch-ups to repairing paint damage. The Dent Wizard Difference Unlimited, uncapped earning potential based on commission: the harder you work, the more you can makeExcellent benefits, including medical, dental, vision, 401(k), paid vacation and moreOutstanding perks, including mobile phone, company vehicle, gas card and moreWe will fully equip you with the most current tools and suppliesIndependence to manage your day; no micromanagementGreat work/life balance that puts you in charge of your scheduleOn-the-job training in our computerized color matching systems and painting techniques from experienced paintersCertifications and advanced training with organizations like PPG and BASFDefined career path with five levels from Senior Technician to World-Class Technician, each with bonuses, perks and recognition What You Need to Succeed 3+ years of auto painting experienceVision abilities including close, distance and color vision, depth perception and ability to adjust focusGreat communication skills to interact with customers and build accountsManual dexterity for repetitive-motion tasksStrong work ethic, self-motivation and the ability to work independentlyToughness and grit to work outside in all kinds of weatherPhysical stamina to kneel, bend and squat, as well as lift up to 45 poundsValid driver's license and good driving recordThe compensation offered for this position will depend on qualifications, experience, and geographic location. This position is primarily paid on highly incentivized commission structure. The starting compensation is expected to be between $60,000 and $80,000 annually. We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). About Dent Wizard Dent Wizard is the nation's undisputed leader in automotive reconditioning services and vehicle protection products - and our success is the result of the great people who serve our customers. We're stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve. Apply Now!!!

Compensation: Starting at $24.00/hr. GuaranteedHourly Rate: $35.00/hr. (based on experience and certifications) 100% Paid Life InsuranceBenefits Include:Paid vacation and holidaysHealth InsuranceDental InsuranceVision InsuranceMatching 401(k)Paid on-the-job trainingLeadership development and coachingTuition reimbursement including technical certificationsSafety shoes offered through the companyReferral programEmployee discountQualifications: Must have/maintain VA State Safety Inspection LicenseMust have a valid driver's licenseReliable transportation to and from workHave effective interpersonal and oral communication skillsResponsibilities: Conducts State Safety Inspections on vehicles in an ethical manner, and following all Virginia State Police, Virginia DEQ, and company guidelinesObserves general vehicle condition while performing basic services, and reports any obvious repair needs or safety concerns to the Service ManagerMaintains shop cleanliness for a clean and inviting appearanceFollows all safety procedures and reports any concerns to the Service ManagerComply with established safety programs, including wearing protective eyewearAPPLY NOW! PM Lube, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against based upon disability.

About Hawx: Founded in 2013, Hawx Pest Control is a customer-centric and technology-driven company that is in the process of revolutionizing the pest control industry. As we embark on a period of rapid growth, we are adding ambitious, career-oriented team members. At Hawx we pride ourselves on our company culture. Not only are our team members treated with respect and competitively compensated; they also benefit from being part of a company that actively rewards employees for being team players while providing ample opportunity for personal and professional growth. We are hiring a confident, energetic and hardworking individual for a Pest Control Service Professional position. We welcome candidates from other hard-working blue-collar industries, such as construction, lawn care, landscaping, retail, grocery, sanitarians and other customer service-oriented backgrounds. You bring the right attitude and customer service experience, and we will provide the training to ensure your success! Pay $18 - $22 compensation rangeIncentives available through sales commissions, review incentives, performance & more Benefits Medical, dental, vision and life insurancePTO, Paid Holidays & 401KCompany vehicle, gas card and phone Duties Perform residential pest management service routes with the highest level of customer service and professionalismAddress and alleviate customer concerns and pest related issues by using integrated pest management strategiesComplete all duties required by a pest/mosquito/termite service professional: customer consultation, inspection, eliminate/identify conducive conditions and proper treatments.Maintain and care for company equipment, vehicle and gas card and other job-related items.Continually stay up to speed on latest industry trends and trainingUtilize handhelds for customer routing, billing and processing service orders Requirements High School Diploma or equivalentMust be 21 years or older w/ valid driver's licenseAble to lift at least 50 poundsPass required background check and drug screening and be authorized to work in the US Skills Ability to build rapport and positively engage and work with customersAbility to prioritize and multitaskPositive and professional demeanor - from attitude to appearanceExcellent written and verbal communicationEagerness to go above and beyond to address customer needsThrive and have interest to continually learnTeam playerAbility to fully complete tasks and responsibilities in a timely manner.Ability to follow directions and guidelines in accordance with best practices and protocolsCapable of respectfully working together with fellow technicians and branch managementComfortable with technologyAbility to think outside the box and apply creative problem-solving techniques Work location On the road - customer facingOutdoors through all four seasonsBranch location when necessary for training, product replenishment, etc. EEO:Hawx Services, LLC is an Equal Opportunity Employer committed to fostering an inclusive work environment with the most qualified employees. Both in our hiring process and in the experiences that our team members have as employees, Hawx is committed to diversity, equity, and inclusion. Accordingly, Hawx is committed to equal employment opportunity regardless of race, color, ancestry, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, sexual orientation, age, marital status, disability, gender identity, or veteran status.

AmeriPro Roofing, one of the largest residential roofing contractors in the nation is immediatelyHiringOutsideSales Representatives in the DMV area!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed departments for every stage of the job process, giving Outside Sales Representatives more time in their day! We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years!Outside Sales Representatives are instrumental in that growth!Compensation& Benefits for Outside Sales RepresentativesDraw advancement vs Commission (used as steady pay)Commission on approved sales (paid on collected revenue)$67,000 - $266,000 / yearVehicle allowance (provided for qualifying vehicles)Quarterly Bonus (based on revenue goals)Full Insurance Benefits (Health, Dental, Vision and Life)401K with 4% Employer MatchSales Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (to supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work summaries and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience (preferred)Must have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge (preferred)Previous experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#HP

Position Title: Install Helper (Residential/Light Commercial)Reports To: Field Supervisor or General Manageror Lead InstallerStatus: Full-time, Regular positionCategory: InstallationLocation Name: CroppMetcalfeLocation Address: 5301 Holland Dr, Beltsville, MD 20705Why You Should Join the Service Experts Team Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth.Join us and become an EXPERT!Service Experts Company Perks and Benefits for YOUTop Pay for Top Performers, including incentive and bonus opportunities (depending on the position)Our Top Technicians earn over $60,000Generous PTO provided20 paid days off within your first year of employment (vacation, personal holidays, & national holidays)25 paid days off after your 2nd year of employmentNo layoffs during “Slow Season” – due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ample advancement and career-growth opportunities available across the U.S.Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programsWe provided wellness program options for free employee medicalCompany-provided smart phone, tablet, uniform plan, and tool replacement programWe’ll make you better at what you do with our internal Training AcademyBest-in-class 401(k) Retirement Savings Plan with attractive company matching contributionsCompany-paid employee Life Insurance with options for YOU and your Family!Short-term and Long-term disability insurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Position Summary:Assists the Installer or Lead Installer in the installation of residential and/or light commercial HVAC equipment and accessories. Work is performed under direct supervision.Key Responsibilities: Works under direct supervision of the Installer or Lead Installer to install HVAC equipment and accessories in the customer’s homeAssists with the installation of heating, air conditioning, ventilation, and refrigeration equipment, as well as accessories, in accordance with company requirements and manufacturer specificationsAssists in the installation of ducts and duct fittingsPerforms duties so as to deliver of excellent customer service and sustain high levels of customer satisfactionAssists in the delivery and removal of equipment needed to complete the installation workAssists the Installer or Lead Installer in ensuring company property, vehicles, and tools are being properly used, maintained, and properly accounted forAs needed or required, completes all paperwork in a neat, accurate, thorough, and timely mannerRepresents the company professionally, honestly, and ethically in all business matters and concernsResponsible with the Installer for keeping installation vehicle clean and neat both inside and outside in keeping with the company’s professional imagePerforms similar/other duties as needed or assignedRegular, reliable attendanceHealth & Safety Roles and Responsibilities:Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately Reports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediately Corrects substandard acts or conditions within area of control Uses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s) Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or worn Complies with the general rules as prescribed by company program(s) procedure(s) Operates devises or equipment as prescribed by company program(s) or procedure(s) Participates in any safety initiatives, teams, or committees Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately Provides input on developing safety initiatives and plans to eliminate exposures that could cause accidents Does not perform act that may endanger the safety or well-being of others Does not engage in any pranks, contests, or rough boisterous behavior Works in compliance with applicable legislative requirement Desired Skills and Qualifications:High school diploma or GED with additional training and 0 to 2 years’ experience in HVAC with technical training certification preferredMust possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work areaEPA and safety certifications requiredBasic knowledge of the fundamentals of the operational functionality of heating, air conditioning, and ventilation equipment as well as related accessoriesMechanical aptitude and the ability to operate, or learn to operate, all necessary tools and equipmentBasic skills in reading wiring diagramsEffective communication skills to communicate with customer and to provide excellent customer serviceEffective and efficient time-management and organizational skillsValid driver’s license with acceptable driving recordAvailable to work flexible hours and on-call shifts as neededAbility to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawlAbility to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areasAbility to safely climb 300lb load capacity rated ladders with a 30lb tool beltNatural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perceptionAbility to lift up to 75 pounds and ability to lift and carry items weighing up to 50 pounds

Position Title: Lead Installer (Commercial)Reports To: Field Supervisor or General ManagerStatus: Full-time, Regular positionCategory: TechnicianLocation Name: CroppMetcalfeLocation Address: 8421 Hilltop Rd, Fairfax, VA 22031Why You Should Join the Service Experts Team Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth.Join us and become an EXPERT!Service Experts Company Perks and Benefits for YOUTop Pay for Top PerformersOur Top Technicians earn over $90,000Generous PTO provided20 paid days off within your first year of employment (vacation, personal holidays, & national holidays)25 paid days off after your 2nd year of employmentNo layoffs during “Slow Season” – due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ample advancement and career-growth opportunities available across the U.S.Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programsWe provided wellness program options for free employee medicalCompany-provided smart phone, tablet, uniform plan, and tool replacement programWe’ll make you better at what you do with our internal Training AcademyBest-in-class 401(k) Retirement Savings Plan with attractive company matching contributionsCompany-paid employee Life Insurance with options for YOU and your Family!Short-term and Long-term disability insurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Position Summary:Responsible for the complete and satisfactory installation of commercial (5+ tons) HVAC equipment and accessories. Communicates with customer to answer questions, resolves problems, and ensures complete customer satisfaction. Promotes products and services to customer. Trains other installers, performs install work on more difficult situations, and assists the Field Supervisor or General Manager on work audits, site supervision, and work planning. Works under the direction of the Field Supervisor or General Manager.Key Responsibilities:Works under the direction of the Field Supervisor or General Manager to install HVAC equipment and accessoriesInstalls heating, air conditioning, ventilation, and refrigeration equipment, as well as accessories, in accordance with company requirements and manufacture specifications. As needed, performs limited diagnostics.Designs, fabricates, and installs various ducts and duct fittings as requiredPerforms start-ups on air conditioning and heating systems and other componentsDelivers excellent customer service and sustaining high levels of customer satisfaction.Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit.Responsible for delivery and removal of equipment needed to complete the installation workEnsures company property, vehicles, and tools are being properly used, maintained, and accounted for • Completes all paperwork in a neat, accurate, thorough, and timely manner. Collects payment from customerRepresents the company professionally, honestly, and ethically in all business matters and concernsResponsible for keeping installation vehicle clean and neat both inside and outside in keeping with the company’s professional imageFollows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to branch, and orders/replenishes vehicle stock as needed. May be responsible for completing material requisition forms and related administrative activities.Assists the Field Supervisor or General Manager with site supervision, planning, and estimatingAssists the Field Supervisor or General Manager with completing quality audits on selected installations to ensure superior performance, quality, and customer satisfactionTrains other installers in technical skills and company procedures, as assignedPerforms similar/other duties as needed or assignedHealth & Safety Roles and Responsibilities:Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediatelyReports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediatelyCorrects substandard acts or conditions within area of controlUses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s)Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or wornComplies with the general rules as prescribed by company program(s) procedure(s)Operates devises or equipment as prescribed by company program(s) or procedure(s)Participates in any safety initiatives, teams, or committeesReports all injuries or incidents as prescribed by company program(s) or procedure(s) immediatelyProvides input on developing safety initiatives and plans to eliminate exposures that could cause accidentsDoes not perform any act that may endanger the safety or well- being of othersDoes not engage in any pranks, contests, or rough boisterous behaviorWorks in compliance with applicable legislative requirementDesired Skills and Qualifications:High school diploma or GED with additional training and 5 plus years’ experience in HVAC with technical training certification requiredMust possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work areaEPA and safety certifications requiredProficient in the fundamentals of the operational functionality of commercial heating, air conditioning, and ventilation equipment as well as related accessoriesAdvanced skills at installing commercial heating, air conditioning, and ventilation equipment as well as related accessoriesProficient in the layout and installation requirements of commercial duct work and duct fittingsAdvanced mechanical aptitude and the ability to operate all necessary tools and equipmentProficient and able to operate all necessary tools and equipment to perform various install projectsAdvanced skills at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on commercial HVAC equipmentProficient and able to properly start up and balance airflow and to properly align belts and pulleys on all commercial systems with little to no supervisionAdvanced skills installing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervisionAbility to calculate heat gain and loss on commercial buildings using approved methods

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment If you are looking for a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent - no matter your background or experience. Wherever your confidence level is, we'll make sure you're trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That's why we do not require any experience in our service centers! It doesn't matter if you're a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE'LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings - Most locations close by 7pm Competitive pay set at $18.50 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within - 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount - 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#BA0041#

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily . WHAT WE OFFER We are a large company serving many unique customers - because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering: Ongoing Education & Training Exposure to a Large Variety of Projects Industry-leading Benefit Packages Advanced support and tools designed to improve your workflow Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time. Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers' expectations Provides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner. Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base. Test malfunctioning systems and components using electrical and/or mechanical skills. Maintain legible corporate and personal records of work history. Provides department support by processing job tickets, and work orders to the necessary department promptly. Provide support by picking up, delivering, and installing cases. Perform work on minor construction and remodeling projects including startups of new installations. Drives company vehicle in a safe manner. Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED. EPA certification. Certification from an accredited vocational-technical or trade school is a plus! Minimum 5+ years of commercial refrigeration experience required. Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus. Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. Must have a good driving record and be able to work independently. Emergency on-call availability is a basic requirement. Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Why Guitar Center Heres just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assigned Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid jobrelated requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1ext. 2862 or by sending an email to .Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products

Overview: Hogan & Sons Tire and Auto - We are a multi-generational family business that provides a full-service solution for all of your automotive and repair needs. These can range from tire replacement and inspections to maintenance packages.The General Service Technician is responsible for conducting non-technical automotive service repairs such as oil changes, tire and wheel related services as well as driving customers, picking up parts, and maintaining the cleanliness of the shop as needed.Compensation: $15-$18 + CommissionsBenefits:Competitive Bi-Weekly PayTuition Reimbursement, up to $3,000 annuallyPaid Vacation and Sick Time6 Paid HolidaysMedical, Dental and Vision Insurance (Effective 1st of the Month after Hire)Health/Flexible Spending AccountEmployee Assistance ProgramTelemedicine ProgramSupplemental Critical Illness, Hospital and Accident PlansLife Insurance (Company paid)Short/Long Term DisabilityHealth Savings and Flexible Spending Account401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!! Principal Duties and Responsibilities: Performs tire mounting/dismounting, wheel balance and tire rotation. Performs oil changes and other basic services at the direction of the Shop Manager or Store Manager. While performing basic services, observes general vehicle condition and points out any obvious needed repairs or safety concerns to the Shop Manager or Store Manager. Utilizes the company's Multi-point Inspection and/or Repair Order to properly document the vehicle condition. Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance. Safely transports customers to and from their place of residence or business using the company vehicle. Picks up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle. Operates company vehicle in a safe and courteous manner obeying all traffic laws. Conducts State Safety and Emission Inspections on vehicles in an ethical manner following all company and state guidelines. Follows all safety procedures and reports any concerns to the Shop Manager or Store Manager. The General Service Technician should also adhere to all company policies and procedures as outlined in the Employee Handbook.Qualifications: High School Diploma or equivalent A valid, clean driver's license, or obtain a valid drivers license within 30 days of hire date Possesses a general understanding of under the hood, mechanical and under carriage assemblies Ability to work a minimum of five days per week, including weekends Working Conditions and Physical Demands:The General Service Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The General Service Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently. Hear and speak Vision sufficient to detect color, depth, and re-focus Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.#bayard

BASIC FUNCTIONSupport various Engineering groups throughout the JCI organization by testing semi-hermetic compressors designed for chiller duty. ESSENTIAL DUTIES & RESPONSIBILITIESCarry out testing as outlined by test requests, and criteria defined by Engineering. Must be able to operate test stand equipment in a safe manner. Properly diagnose and correct problems encountered during testing.Plan and set up test programs: setting up pipework, bending tubing, calibrating instrumentation, programing channel configurations in data acquisition system, pulling vacuum and charging systems.Diagnose electrical circuitry, both DC and AC (Single and Three Phase).Maintain proper lab function by performing maintenance on various test blocks as well as their associated componentsAdheres to the Company’s Code of Conduct and Business Ethics standards.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions.Firm understanding of the refrigeration cycle and its components. This can come from technical training or hands on experience. Knowledge of hot gas bypass loops preferred.Ability to wire motors and drivesUnderstanding of AC and DC circuitry. Capability of creating control circuitsMaintains a positive attitude and work well with othersEDUCATION/EXPERIENCERequires an associate’s degree from college or technical school; or two (2) to five (5) years related experience and/or training in refrigeration; or equivalent combination of education and experience. Refrigeration License (EPA 608) is not required, however it is preferred.COMPUTER SKILLSProficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint), as well as Internet software and E-mail is required.SUPERVISORY RESPONSIBILITIESThis job has no supervisory responsibilities.WORK ENVIRONMENTThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.The noise level in the work environment is usually moderate.PHYSICAL REQUIREMENTSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job the employee is regularly required to talk or hear. The employee is frequently required to sit and use hands to touch, handle, or feel. The employee is occasionally required to stand, walk, reach with hands and arms, climb or balance and stoop, kneel, or crouch.The employee is occasionally required to lift no more than 50 pounds. The vision requirements include close vision and ability to adjust focus.THE ABOVE DESCRIPTION OUTLINES THE MOST SIGNICANT JOB FUNCTIONS PERFORMED BUT MAY INCLUDE OTHER SIMILAR FUNCTIONS OR ASSIGNMENTS NOT SPECIFICALLY MENTIONED.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

1K Sign On Bonus! Clean Harbors in Manassas, VA is seeking a Field Services Technician I to join our safety conscious team. This role will be active in the field responsible for the performance of tasks associated with hazardous waste clean-up, site-remediation, equipment decontamination and handling of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursementKey Responsibilities:Ensure Health and Safety is the number one goal by following policies, processes, and always acting in a safe mannerEngage in strenuous physical labor including lifting and pulling heavy objectsOperate light and heavy equipment, handles various hand tools and powered industrial tools, works with vibration-producing toolsWear and properly use a variety of personal protective Equipment (PPE). Including respirators, skin, face, hand and foot protection in a multiple number of combinationsWork in various temperatures indoors and outdoors in all weather conditionsWork in atmospheres and locations with the potential for exposure to various chemical and physical agents, some of which may be hazardous, toxic, or corrosiveWork in potentially elevated noise levels, confined spaces, including lifting in areas of low clearanceWork at elevations including working from ladders and scaffoldingAssist in field sampling activities and calibration of metersClimb ladders, scaffolding and into and out of trucks, tanks, and various other containersWork extended (> 8 hrs.) time periodsAttend all compliance and safety update meetingsInspect drums for container integrity and regulatory complianceSafe loading and unloading of hazardous and non-hazardous wasteConduct waste stream sampling and profiling as necessaryFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerform other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsRequired Qualifications:Valid Driver’s licenseReliable transportationAbility to perform physical functions per Key ResponsibilitiesThis position includes emergency response, a continuing condition of employment is agreeing to be on-call; on occasion working on weekends and holidays will be required; emergency response situations can extend beyond 8 hours, up to 12-24 hrs.Perform physical functions per job requirementsPer OSHA's Respiratory Protection standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards.Preferred Qualifications:Previous relevant labor experienceClean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial or local protected class.Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-.Clean Harbors is a Military & Veteran friendly company.*CH*LI-LT1