Oxford, AL 36203 • (36.2 miles) • Full Time • 9/30/2026

NIMBUS® Advanced Process Cooling is the cooling systems and solutions research, development, and manufacturing division of EMSCO, Inc., An Inductotherm Group Company with a history of providing service to the induction melting industry for over 40 years. NIMBUS Advanced Process Cooling manufactures hybrid adiabatic cooling systems, and Dry Cooling Systems in Anniston, Alabama.GENERAL ASSEMBLYThis position will be responsible for following and maintaining our general assembly processes for our adiabatic cooling units. This includes use of all standard shop tools, overhead cranes, forklifts and operating hydraulic assembly tables, while following standardized assembly procedures.In addition to product assembly there will be subassembly tasks to be performed.- Wiring motors to be installed on

Anniston, AL • (41.7 miles) • Full Time • 9/30/2026

Carfair Composites - Composite OperatorCarfair Composites is a leader in fibre-reinforced plastic (FRP) design and composites technology and has dedicated team members located in facilities between Winnipeg, MB (Canada), St. Cloud, MN (USA), and Anniston, AL (USA), Wausaukee, WI (USA) and Gillett, WI (USA). For further information, please visit our website at www.carfaircomposites.com.POSITION SUMMARY:The Composite Operator is an essential part of our production team, specializing in the fabrication and assembly of composite materials.WHAT YOU WILL DO:Prepare molds and materials for production processes.Utilize composite manufacturing techniques, including hand lay-up and resin infusion.Apply resin and fiberglass layers according to specified guidelines and schedules.Conduct quality checks

Pell City, AL • (25.9 miles) • Full Time • 9/29/2026

Mechanical EngineerDepartment: Engineering & ManufacturingReports To: Chief EngineerFLSA Status: ExemptLocation: On-site (manufacturing environment)Travel: Occasional (domestic; international may be required)Position SummaryJoin our engineering team and help build the products that keep bulk material moving. As a Mechanical Engineer, you’ll take ideas from concept to productiondesigning components and assemblies, supporting application and quoting, and partnering with manufacturing to turn solid engineering into reliable, high-quality product on the floor. This role offers hands-on involvement in new product development, continuous improvement, and D365 data accuracy (BOMs/routings/cost inputs) that directly impacts execution, margins, and customer satisfaction.Key ResponsibilitiesEngineer

Calera, AL 35040 • (28.6 miles) • Full Time • 9/29/2026

Company Description What We Live ByThe McWane Way is a core philosophy outlined by the founder J.R. McWane in 1920. Today It encompasses Teamwork, Excellence, Leadership, Environment, Communication, Accountability, Safety and Trust. All team members at every level are expected to know and work by these principles, values, and behaviors. Most importantly, every team member is expected to be able to answer this question, “What does this mean for me?” This is the all-important question because behavior is the best evidence of a living principle. Join the McWane team on the journey to The McWane Way.Job Description The General Worker will perform various tasks assisting with the operation of the plant, including using hand tools, cleaning, washing, sweeping, and shoveling materials. As the Gen

Birmingham, AL 35210 • (34.7 miles) • Full Time • 9/29/2026

Do you enjoy working on cars, computers, gaming systems, 3D printers, robotics, electronics, or simply figuring out how things work? We are looking for someone who is naturally technical, mechanically inclined, comfortable with computers, and enjoys hands-on problem solving.This position combines computer-based work with hands-on manufacturing in a fast-paced, quality-driven production environment. Previous CNC or machining experience is a plus, but technical aptitude and the ability to learn are just as important.SHIFT: 2:00 PM - 11:00 PM Monday - FridayPAY:$18.00 per hourResponsibilitiesUse computer-based CAM software and specialized manufacturing equipmentProcess production orders to precise customer specificationsLearn established machining processes, tooling, and fixturesFollow detail

Birmingham, AL 35201 • (39.8 miles) • Full Time • 9/27/2026

Core Linen Services is a leader in hospital and hospitalitylaundry processingservices aroundthe country. Our focus is on service, quality and safety which enableour clients to provideessential services to their patientsand guests. The Company operates across 20+ states and is a portfolio company of H.I.G. Capital, based in Miami, FL.Shift Hours: 6pm-2:30amSummary:To assure customer deliveries are made with accuracy, timeliness. And within set time parameters. Perform job duties in a safe and courteous manner while maintaining an unblemished driving record. Adhere to all company and DOT requirements, including but not limited to daily documentation.Adhere to all Core Linen Services policies as stated in the employee handbook.Be in uniform and maintain a neat appearance every workday.Adhere

Talladega, AL 35160 • (15.1 miles) • Full Time • 9/26/2026

Tasks of the Position Places components on production line as specified by the operations standards Assembles components with the use of bolts, clips, and screws, to otherwise fasten parts together Participate in activities to include 5S, Kaizen, Quick Hits, Six Sigma, and other related continuous improvement events Other duties as assignedKnowledge/Skills/Abilities Work in a standing position for a minimum of 8 hours Perform tasks that require continuous reaching, grasping, twisting, leaning and bending Read and comprehend simple instructions, short correspondence, and memos Effectively present information in one-on-one and small group situations to customers, clients, and other associates in the organization Add and subtract two digit numbers and to multiply and divide with 10's and 100'

Saginaw, AL 35137 • (31.7 miles) • Full Time • 9/26/2026

Job Summary:This is not an entry-level role. We are seeking a highly skilled operator who can independently program, set up, and run Press Brake with minimal supervision. We have an immediate opportunity for an experienced press brake operator. This position is responsible for the daily set up and operation of the press brake.Experience:Read and interpret detailed engineering drawingsWorking knowledge of fabrication and press brake operations including basic set up.Good competency in basic shop mathStrong sheet metal forming skills and fabrication background in a manufacturing environmentEssential Duties and Responsibilities:Select correct tooling, load, se-up and operate press brakeInterpret and utilize engineering drawings and work order instructionsPerform visual and dimensional inspect

Oxford, AL • (35.7 miles) • Full Time • 9/26/2026

Job Title: Industrial PainterJob DescriptionThe Industrial Painter prepares and finishes a variety of surfaces in a manufacturing environment using industrial painting techniques and equipment. This role focuses on proper surface preparation, accurate color matching, consistent paint application, and the use of protective coatings to ensure high-quality, durable finishes that meet detailed specifications and safety standards.ResponsibilitiesPrepare surfaces for painting by cleaning, sanding, masking, and applying appropriate treatments to ensure proper paint adhesion.Operate and maintain industrial painting equipment such as spray guns and paint brushes to apply primers, sealers, and topcoats to metal and other materials.Mix and match paint colors and finishes according to specifications,

Trussville, AL • (36.9 miles) • Full Time • 9/25/2026

Company Description Thank you for your interest in a career at Amerex. Our company stands as a global leader in fire suppression products, driven by our commitment to our team members, communities, and customers. We embrace individual differences and actively recruit team members from diverse backgrounds and skill sets, irrespective of race, gender, or ethnicity. At Amerex, we are dedicated to continuous collaboration and innovation, striving to remain leaders in our industry.Every position is rooted in a culture that aligns with eight guiding principles:Teamwork, Excellence, Communication, Leadership, Environment, Safety, Accountability,andTrust. These principles are the foundation of McWane, Inc. and serve as a compass, offering personal guidance to navigate daily work situations.Job Des

Alabaster, AL • (33.5 miles) • Full Time • 9/25/2026

Snelling is seeking a talented Mechanical Service Technician to join a diverse team for a company in the Alabaster area. The service technician will be working on various custom-engineering equipment for foundry, forge, and steelworks environments.Starting Pay Range: $23.00-25.00/hr, plus benefitsMechanical Service TechnicianJob Duties include but are not limited to:• Will inspect, service, and repair heavy equipment or components and provide written service reports from findings.• Will be responsible for facility and grounds maintenance as needed.• Will assist in shipping, receiving, and inventory control.• Will assist with spare parts processing as needed.Mechanical Service TechnicianQualifications Required:• 2-3 years of service experience, preferably in mechanical repair.• Good level o

Bessemer, AL 35020 • (43.7 miles) • Full Time • 9/25/2026

Modular Manufacturing Electrician Healthcare UnitsPay range may differ based on experienceA day in this roleYou start your shift at 6:00 a.m. in a clean, climate-controlled facility. One address, every dayno bouncing from site to site, no rain delays. You’ll move between modular healthcare units on the line, installing circuits, bending conduit, pulling ACS and HCF cable, and bringing each unit to life. By early afternoon, you’re testing systems against code and documenting results. Overtime to 4:30 p.m. (and some Saturdays) is available when production ramps. Continuous production means steady work, steady teammates, and steady growth.What you’ll doInstall wiring and electrical systems in medical modular units, including outlets, switches, panels, and lighting.Interpret blueprints, wiring

Trussville, AL 35173 • (37.1 miles) • Full Time • 9/24/2026

Job Title: Project Manager - Steel FabricationCompany: M&J Steel - Trussville, ALU.S. Position: Does not qualify for work visa/sponsorship.The CompanyM&J Steel, LLC. is a leader in the fabrication and erection of metals and we carry the distinguished certification from American Institute of Steel Construction. (AISC) We have been in business since 1976 (formerly M&J Materials, Inc.), providing quality service and materials to some of the largest general contractors nationwide.Position SummaryThe Project Manager is responsible for planning, coordinating, and delivering steel fabrication projects on schedule and within budget. This role serves as the primary point of contact between M&J Steel and our clients, subcontractors, and internal production teams. The ideal candidate brings a solid u

Trussville, AL 35713 • (36.9 miles) • Full Time • 9/24/2026

Benefits:401(k)Competitive salaryDental insuranceHealth insurancePaid time offTraining & developmentVision insurance The Assembler candidates will be responsible for the installation of various parts and/or components onto John Deere construction and/or agricultural equipment for the purpose of custom applications such as dozers used in fighting forest fires, excavators for military applications, loaders for landfill or waste transfer stations and agricultural tractors outfitted for right-of-way mowing or power line maintenance. Other key responsibilities Installation of manufactured kits onto new equipment. Ability to follow detailed work instructions and procedures to ensure quality ofinstallation.Ability to follow manufacturer procedures for torquing bolts, hydraulic hoses andfittings.A

Anniston, AL • (41.7 miles) • Full Time • 9/24/2026

We're not just offering a job, we're inviting you to be part of a team built on PARTNERSHIP, INNOVATION, EXCELLENCE, and SAFETY at Wallace Electric.PARTNERSHIP means we work together with trust, loyalty, and an owner mindset, always striving for win-win outcomes.INNOVATION drives us to think differently and create real value in everything we do.EXCELLENCE pushes us to set high expectations and deliver exceptional results.SAFETY is our foundationboth physical and psychological safety matter every single day.If you're looking for a place where you can grow your career, be valued for who you are, and contribute to something meaningful, we'd love to have you on our team.We are part of Kelso Industries, which is comprised of 25+ (and growing) market-leading operating companies with over 2,600 e

Alabaster, AL • (33.5 miles) • Full Time • 9/22/2026

We're hiring for entry-level automotive roles at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. In these entry-level roles, you'll have several positions to choose from:Detailer: detailing vehicles, including washing, interior cleaning, and exterior buffingLot Attendant: move vehicles from one department to the next in our Inspection CentersPhotobooth Associate: take photos of our vehicles so customers can see our vehicles in our spinnersInspection Associate: inspect the interior and exterior of the vehicles and accurately identify any imperfections/defectsPay: Starting pay for this position is $16/hr.Schedule: Please keep in mind that all locations are subject to mandatory overtime based on business nee

Moody, AL • (32 miles) • Full Time • 9/22/2026

LINE LEADER Automation Personnel Services is looking for aLine Leaderfor a company based inMoody,AL.You will have the opportunity to joina supportive team, gain valuable experience, and enjoy opportunities for growth in a stable, fast-paced work environment. Pay Rate $22.00to $23.00per hour Schedule and Hours Monday through Friday,700 am to345pm. Line LeaderDuties and ResponsibilitiesLead and direct a team of production employees on assigned production lines.Ensure production schedules, quotas, and deadlines are met.Monitor product quality throughout the manufacturing process.Verify proper setup, operation, and changeovers of production equipment.Train new employeesonsafety procedures, quality standards, and job responsibilities.Monitor attendance, productivity, and performance of line emp

Birmingham, AL • (39.8 miles) • Full Time • 9/22/2026

DescriptionB.L. Harbert International is looking for a BIM Manager to work with our International Group located in Birmingham, Alabama. Candidate will develop Building Integrated Models (BIM) to support construction projects through inter-discipline clash resolutions, quantity take-offs, and shop/coordination drawing development. Candidate will also manage team of BIM/CAD Operators and collaborate regularly with design and construction teams. Advanced proficiency in Autodesk Revit is required.Responsibilities:· Prepare and modify all trade (structural, architectural, mechanical, electrical, etc.) models and details as directed utilizing Autodesk Revit· Perform interdisciplinary coordination, shop/coordination drawing production and material quantification using Autodesk Revit· Develop and

Birmingham, AL • (39.8 miles) • Full Time • 9/21/2026

Job Title: Fuels QC Manager (CQCM)/Site Safety OfficerReports to: Fuels Program DirectorFLSA Status: ExemptBhate (www.bhate.com) is seeking a field Fuels Construction Quality Control Manager (CQCM) to join our Fuels Team. The field CQCM is responsible for the implementation, oversight and management of all aspects of the Quality Control program, for the management and coordination of the three phases of control, all documentation performed by testing personnel and any other inspection personnel required by contract. The CQCM role includes direct oversight and review of the project documentation and physical inspection phase of the workflow process and working with other in-house personnel to include Project Managers, Superintendents, etc., and external personnel to produce and document a q

Anniston, AL • (41.7 miles) • Full Time • 9/21/2026

***This position is located in Hopkinsville, KY*** Company willing to pay relocation expenses for the right candidate. Come work for a company who provides machined foundry and other precision components to the US Navy. CNC Supervisor oversees small team (2-3 people) of employees to produce quality machined parts. Must have knowledge of CNC programming, set up, in process adjustments, can give recommendations for improvements, and lead machining operations. Familiar with HAAS machines and programs a must. Maintains strict quality and safety standards, keeps accurate job tasking records for machining processes measuring actual dimensions, and maintains equipment and supplies. Maintains inventory control and forecasts material use demands.\nCompany DescriptionEssential Responsibilities May I

Bessemer, AL • (43.9 miles) • Full Time • 9/20/2026

ELECTRICAL PANEL WIRING AND ASSEMBLER TECHNICIANS: Wire Control Panels at the Bessemer location. Must be fast, neat, and do excellent quality work. Entry level to experienced candidates should apply. Experience should include the following.- Mounting equipment in a enclosure,- Terminating and crimping lugs on wire,- Operating drill, saws, hand tools, etc.ELECTRONIC TECHNICIANS: Wire and test control panels- Background in Electronics- Experience using Voltmeters, Amp meters, etc.- Read schematics and wiring diagramsThe ideal candidate will have excellent mechanical aptitude and some wiring termination skills. A background in electrical/electronics is a plus but not required. Techs with electrical/electronic background may also be trained to perform equipment testing. Interested candidates s

Wetumpka, AL 36092 • (39.6 miles) • Full Time • 9/19/2026

The Rough Millworker is responsible for preparing and processing raw lumber and wood materials for use throughout the custom woodworking and millwork operation. This position requires attention to detail, safe and efficient operation of woodworking equipment, accurate material preparation, and the ability to work as part of a team.The Rough Millworker plays an important role in maintaining production flow by ensuring that properly prepared materials are available for the next stages of manufacturing.\nCompany DescriptionJP Millwork is a Custom Millwork Operation that focuses on High-End Building materials.Company DescriptionJP Millwork is a Custom Millwork Operation that focuses on High-End Building materials.

Birmingham, AL • (39.8 miles) • Full Time • 9/19/2026

JR INDUSTRIAL, INC. NOW HIRING ALL POSITIONS!!Job OverviewWe are seeking a skilled Maintenance Industrial professional to join our team. The ideal candidate will be responsible for ensuring the optimal functioning of industrial equipment and systems. This role requires a strong understanding of mechanical repairs, and preventative maintenance practices. The Maintenance Industrial professional will work in a fast-paced environment, contributing to the overall efficiency and reliability of our operations. Local work, no travel. Monthly safety bonus available.DutiesPerform routine maintenance and repairs on industrial machinery and equipment.Conduct stick welding and other welding techniques as needed for repairs3G stick welding testAbility to layout and field fabricateExperienceAbility to la

Birmingham, AL • (39.8 miles) • Full Time • 9/19/2026

As a Controls Engineer at Automation Solutions, you will help design, program, commission, integrate, and support custom automated and robotic systems. This is a hands-on engineering position involving both hardware and software, with responsibility for supporting projects from initial concept through installation and post-delivery support.The Controls Engineer will work with PLCs, HMIs, variable frequency drives, servo systems, robots, vision systems, and other industrial automation technologies. The position includes work at our Birmingham facility and at customer locations, with approximately 25% travel required as necessary to support system commissioning, installation, troubleshooting, and service.Successful candidates will demonstrate strong technical aptitude, practical industrial c

Dadeville, AL 36853 • (38.1 miles) • Full Time • 9/17/2026

Produces components by assembling parts and subassemblies.Reads and deciphers schematics, blueprints, and assembly instructions.Positions or aligns components and parts, either manually or with hoists.Uses hand tools or machines to assemble parts.Conducts quality control checks.Cleans and maintains work area and equipment, including tools.Prepares work to be accomplished by studying parts lists and gathering parts, subassemblies, tools, and materials.Positions parts and subassemblies by using templates or reading measurements.Assembles components by examining connections for correct fit, fastening parts and subassemblies.Verifies specifications by measuring completed component.Resolves assembly problems by altering dimensions to meet specifications; notifying supervisor to obtain additiona

Pelham, AL 35124 • (31.2 miles) • Full Time • 9/17/2026

Project Manager - CDBG-DR Compliance & Quality Project Location: Birmingham, Al (Corporate Office) with monthly travel to Maui, HawaiiTravel: 3-5 days per month in Maui, with schedule subject to change based on project needs.Position SummaryTimberline Construction Group is seeking an experienced Project Manager to support a CDBG-DR single-family housing reconstruction program in Maui.This is not a traditional Project Manager role. The position requires strong residential construction knowledge with a primary focus on compliance, QA/QC, documentation, inspections, reporting, Section 3 and project tracking.Key ResponsibilitiesCoordinate compliance and QA/QC activities with project teams and contractorsReview and consolidate construction reports for Canopy reportingTrack schedules, inspection

Birmingham, AL • (39.8 miles) • Full Time • 9/16/2026

Accounts Payable ClerkLocation: Birmingham, AL areaPay: $22–$24 per hourEmployment Type: Full-TimePosition SummaryWe are seeking an experienced Accounts Payable Clerk to manage daily AP functions and support overall accounting operations. This role will handle invoice processing, vendor payments, reconciliations, and month-end close activities while working closely with Purchasing, Receiving, Customer Service, and Operations.Key ResponsibilitiesProcess vendor invoices and perform three-way matching.Resolve invoice discrepancies with vendors and internal departments.Prepare weekly ACH, wire, and check payments.Maintain vendor records and payment terms.Prepare AP reconciliations and assist with month-end close.Provide documentation and support for audits.Maintain accurate accounting records

Birmingham, AL 35233 • (39.1 miles) • Full Time • 9/15/2026

Mechanical Project ManagerCreature is a vertically integrated design-build firm based in Birmingham, AL. Our focus is on developing a differentiated delivery platform that improves the lives of our employees and customers. We specialize in the delivery of facilities utilizing the Design, Manufacture, Construct (DMC) methodology a framework that replaces the century-old, siloed approach of the Architecture, Engineering, and Construction (AEC) industry. A major component of our platform is our in-house Mechanical, Plumbing, and Carpentry trades.Job DescriptionCreature is seeking a Mechanical Project Manager to lead and manage our mechanical team. This individual must operate with a high level of ownership, be a sharp communicator and problem-solver, and lead projects with excellence from sta

Bessemer, AL 35020-4169 • (43.9 miles) • Full Time • 9/15/2026

Description: BLOX is revolutionizing the construction industry by integrating advanced manufacturing principles with innovative technology to deliver high-quality, modular building solutions. We are driven by a mission to rethink how buildings are designed, fabricated, and delivered, ensuring efficiency, scalability, and sustainability.DescriptionWe are seeking a driven, results focused DMC Project Manager to lead end-to-end project execution with our Design Manufacture Construct (DMC) delivery model. This role requires a strategic thinker, proactive leader and collaborative problem solver who can manage complex projects while aligning cross functional teams to deliver high quality modular building solutions.Requirements: Job ResponsibilitiesLead and manage complex, fast paced projects fro

Birmingham, AL • (39.8 miles) • Full Time • 9/14/2026

Job Title: Engineer 1 (Electrical)Immediate W2 contract position available in Birmingham, AL (Hybrid).If not local, must be willing to relocate at own expenseEstimated Duration: 6 Months (assignment ends December 2026, great experience for other positions with this company)Schedule: Hybrid schedule, 1 day remoteJob Description / Desired Qualifications:requires accredited Bachelor’s degree in Electrical EngineeringSkilled with report building in Excel or PowerBISupport the Comprehensive System Review Efforts and site Technical Evaluations (TEs)/ Preventive Maintenance Change Request (PMCR) backlog reduction efforts.Help perform a single component vulnerability review for the recirc and RCS systems, by developing spreadsheets to compile data on components classification, health, and vendor a

Wetumpka, AL 36092 • (39.6 miles) • Full Time • 9/13/2026

Summary:Electrical software design, build and troubleshooting of control system solutions for industrial equipment and automation products by performing the following duties.Senior Control Engineer Essential Duties and Responsibilities: (Other duties may be assigned)· Report directly to Control Engineering Manager, or directly to Owner in absence of Manager.· Delegate and balance existing and incoming workloads to the controls group.· Weekly update on control engineering workload and schedules.· Working with ASI sales on verifying man hours for projects and workloads for sales planning.· Develop customer relationships to identify assigned project needs in a timely manner.· Training and assistance with new hire learning.· Self-sufficient with project research and development.· Oversee contr

Anniston, AL • (41.7 miles) • Full Time • 9/13/2026

Our client, a leading packaging manufacturer, is seeking an experienced Production Manager to oversee daily plant operations and drive safety, quality, productivity, and employee engagement.Responsibilities:Lead and develop production teams in a fast-paced manufacturing environmentEnsure production schedules and customer requirements are metDrive continuous improvement initiatives to increase efficiency and reduce wasteMonitor and improve key performance metrics including safety, quality, and productivityPartner with Maintenance, Quality, and Supply Chain teams to support operational goalsQualifications:Prior experience in a Production environmentExperience managing supervisors and hourly employeesStrong knowledge of Lean Manufacturing and continuous improvement practicesPackaging, plastic

Alabaster, AL • (33.5 miles) • Full Time • 9/11/2026

Diversified Support Services is seeking dependable CNC or Plastic Injection Molding Operators in the Alabaster, AL area to support manufacturing operations in a hands-on industrial environment. This role involves industrial fabrication equipment and following established safety procedures in a fast-paced facility. Responsibilities Operating CNC machines and relative equipmentSafely remove finished parts from equipment and complete required finishing and packaging processes.Follow machine operating procedures, production requirements, and workplace safety guidelines.Participate in hands-on training and work closely with trainers and experienced team members to learn equipment operations. Qualifications Manufacturing, CNC and or injection molding, or similar industrial experience is a plus.

Birmingham, AL 35201 • (39.8 miles) • Full Time • 9/10/2026

Employment Type: HourlyWork Arrangement:OnsitePosition Summary:**No Relocation assistance or Sponsorship available for this role**Installs and repairs electrical systems, apparatus, and electrical and electronic components of machinery and equipment while following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment. Work in a manufacturing environment following appropriate policies and procedures to ensure the successful execution of position responsibilities.Major Duties and Responsibilities:Replaces faulty switches, and other elements of electrical and mechanical systems. Dismantles electrical machinery and replaces defective electrical or mechanical parts such as gears, brushes,

Leeds, AL 35094 • (29.5 miles) • Full Time • 9/8/2026

Pay Transparency: starting rate of $23 per hour, plus quarterly bonus eligibility.Essential Job Duties and Responsibilities:Review order, build tickets and prints to determine required assembly, exterior finish or any special options.Assemble components according to drawings, instructions and established standards.Proactively identify and write material / hardware shortages on bay white board.Follow inventory replenishment processes.Report all non-conforming parts, materials or drawings to assigned Production Supervisor.Ability to input and scan work order data into MRP/JDE system using RF Scanner, keyboard and mouse and complete required reporting.Consult Assembly Lead/Supervisor on suggestion/guidance to resolve assembly problems.Follow all standard procedures and processes in accordance

Birmingham, AL 35210 • (34.7 miles) • Full Time • 9/7/2026

Reasonable accommodations are available for qualified individuals with disabilities upon request.Essential Duties and ResponsibilitiesPerform a variety of fabrication, wiring and assembly operations on electrical/electronic control panel assemblies or components including layout, assembly, wiring and testingConfigure and test electronic equipment and systems utilizing command-line interface, web interfaces, and Windows desktop applicationsTravel to job sites is 50% of jobUse testing equipment and power toolsPC Computer assembly, setup and testingEnsure that acceptable level of quality control is keptEnsure that schedules are metPerform additional duties, including facility maintenance, as directed by managementQualificationsPrior experience with computers and electronics is requiredAbility

Anniston, AL 36201 • (38.3 miles) • Full Time • 9/5/2026

The Industrial Technician position consists of industrial duct cleaning for manufacturing and commercial companies. This work is performed on the weekends. This work is performed from elevated heights as well as ground level and confined spaces. Industrial Technicians work in full tyvek suits with full face respirators and additional personal protective equipment. Our Industrial Team Lead will be the company point of contact and handles all Industrial Team scheduling.

Birmingham, AL 35210 • (34.7 miles) • Full Time • 9/4/2026

Alabama Professional Services is a family-owned home improvement and maintenance company that serves the state of Alabama. We opened our doors in 1977 with the mission to provide safe and precise solutions to the majority of homeowner needs.At APS, our purpose is to provide remarkable experiences for our customers and your role in that is crucial.We want to provide you with a workplace where you are appreciated, rewarded, and given opportunities to excel in your career.We are looking for a motivated individual to join our office staff as a Scheduling Coordinator.If you pride yourself in providing exceptional customer service and want to be valued for what you bring to the team, apply today!Responsibilities:Represent us by answering calls, make collection calls, schedule free estimates, and

Birmingham, AL 35205 • (38.9 miles) • Full Time • 9/4/2026

Job Summary:We are a large, privately owned, primary care office located on the campus of St. Vincent's in Birmingham. Our scheduling clerks work closely with our physicians and medical assistants daily to maintain quality care for our patients.Education and Experience:High school diploma or equivalent required.Basic understanding of medical terminology is required.Experience with Medical Records (EMR) and with medical scheduling is preferred.Job Duties Include:Scheduling testing as ordered by the physician, and explaining testing instructions to patients.Filling out order forms and obtaining precertification for the scheduled testing..Verifying patient insurance.Calling to confirm patient appointments.Completing insurance and physician referrals.Adhering to HIPAA regulations regarding pro

Childersburg, AL 35044 • (8.9 miles) • Full Time • 9/4/2026

Job Posting: Production Scheduler Position SummaryREAMCO LLC is seeking a detail-oriented and highly organized ProductionScheduler to join our manufacturing team in Harpersville, Alabama. Reporting directly to the General Manager, this role serves as a critical link between Sales and Production, ensuring that production schedules are realistic, achievable, and aligned with customer commitments. The Scheduler will play a key role in helping Sales establish accurate lead times when quoting proposals to customers, directly supporting our ability to win business while protecting our ability to deliver on time.Key ResponsibilitiesDevelop, maintain, and communicate detailed production schedules across all active jobs and projects.Collaborate closely with Sales to determine accurate, achievable l

Birmingham, AL • (39.8 miles) • Full Time • 9/4/2026

Leading Stone and Countertop Company is willing to pay what it takes, plus a great package of benefits. First year potential 70K+! This is a great opportunity for someone ambitious, looking for a future with an excellent company. Technically minded professional who is detail-oriented and comfortable working in a fast-paced production environment. Strong communication, computer, and CAD skills.The CAD/Programming Associate is responsible for taking information from the sales team and field measurement technicians and converting it into a complete, accurate, and executable set of instructions for the fabrication and installation teams. This position will create CAD drawings and layout files to illustrate proposed designs for customers, develop tool paths for 5-axis machinery, and prepare com