We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Overview: MasTec Civil is hiring a Senior Estimator to assist in the growth of the North Carolina/South Carolina market!This individual should have a minimum 10 years of estimating experience + minimum 3 years of field experience in Heavy Civil Construction, specifically with roadways and bridges. You should also be knowledgeable in contract delivery methods: design-build, design-bid-build, Lump Sum, etc., and contract experience with: NC/SCDOT/turnpike, cities/counties, airport authority.This candidate must be a self-motivated person, willing to collaborate with peers, teach young engineers, and constantly strives to identifies problems and solutions. This candidate will required to live in Charlotte, NC. COMPANY OVERVIEW:Founded in 1987, MasTec Civil, LLC (formerly known as Condotte America) is a heavy highway contractor specializing in the construction of complex transportation projects that include roadway, bridges, interchanges, mass transit, and tolling facilities. In short, we build the roads and bridges that connect our families, our communities, and our nation. In doing so, client satisfaction is of primary importance to us and our record reflects our emphasis on understanding our client needs in order to exceed their expectations.MasTec’s Clean Energy and Infrastructure Group (CE&I) is a $4 billion annual revenue business unit that provides construction services for industrial facilities; building products manufacturers, power generation facilities, manufacturing plants; solar, wind, and thermal energy plants; buildings, and infrastructure. Responsibilities: • Understand bid items, basis of estimate, skills to identify errors and discrepancies in plans, and specifications, and solutions.• Wide understandings reading plans, specifications, request for proposal, request for information, addendums, technical special provisions, etc.• Build green sheet estimate, breakdown activity structure, construction schedule, and risk matrix analysis.• Create job budget for awarded contracts.• Understand bid strategy, cost savings initiative, and management skills.• Perform accurate, and within the time frame quantity takeoffs.• Capable to individually estimate an entire job.• Study and review all estimating reports: equipment total hrs., labor total hrs., key indicators, equipment balance analysis, etc.• Constantly review updated NC/SCDOT Standards and Specifications.• Full review of bid submittal package, and lead estimating discussion with company executives.• Obtain clarifications on plans and specifications from owner or engineer of records.• Coordinate and invite suppliers and subcontractors to quote different scope of work.• Analyzes suppliers and subcontractor pricing input when required.• Build and strength subcontractor and supplier relationship.• Complete understanding of unit cost analyzes.• Assists to pre-bid meeting and bid submittals.• Keep updated information regarding commodity trade prices.• Keep looking construction technologies and techniques.• Maintain continue education in construction: assist to engineering convention, forum, etc.• Continue communication with field personnel (project engineer, superintendent, foreman, fleet manager, etc.) to track and adjust as necessary unit costs. Qualifications: QualificationsMinimum 10 years of experience in Heavy CivilMust be located in North CarolinaB.S. in Engineering or Construction Management degree.Knowledge/Skills/AbilitiesPossess high work values, integrity, and ethical standards.Possess great focus to meet and exceed company requirements and expectations.Possess good organization skills and strong verbal and written communication skills.Must have knowledge in bridge and roadway construction.Savvy in North Carolina/South Carolina soil (rock/clay), foundations, concrete structures, temporary structural systems, underground and utility work, earthwork, signalization, roadway lighting and signing, intelligent transportation system, safety standards, etc.Knowledgeable in design-build and design-bid-build contracts with NC/SCDOT and Turnpike Enterprises.Teaching, and mentoring skills.Software Skills:30-Hour OSHA trainingMicrosoft Office: Outlook, Excel, Word, PowerPointScheduling software, P6 PrimaveraHeavy Bid from HCSSVista Accounting softwareBluebeam by REVUAutoCAD- Civil 3DMicroStationAGTEKWhat's in it for you:Financial WellbeingCompensation $135K and up / year, commensurate with experienceCompetitive pay with ongoing performance review and merit increase401(k) with company match & Employee Stock Purchase Plan (ESPP)Flexible spending account (Healthcare & Dependent care)Health & WellnessMedical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and childrenDiabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet InsuranceFamily & LifestylePaid Time Off, Paid Holidays, Bereavement LeaveMilitary Leave, including Differential Pay and Benefits ContinuationEmployee Assistance ProgramPlanning for the UnexpectedShort and long-term disability, life insurance, and accidental death & dismembermentVoluntary life insurance, accident, critical illness, hospital indemnity coverageEmergency Travel Assistance ProgramGroup legal planPosition may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact . Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information.MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions.MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.#LI-EL1#LI-ONSITE Appcast (For Export): #appred

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Flowserve ofrece salario competitivo, bonos anuales, beneficios mdicos desde el primer da, generosas vacaciones pagadas, das festivos pagados, 401(k) y muchos otros excelentes beneficios. NUEVAS CONTRATACIONES SON ELEGIBLES PARA UN BONO DE $2500! SOLICITE MS INFORMACIN! Resumen del puesto: Configurar y operar una variedad de mquinas herramienta para producir piezas e instrumentos de precisin. Incluye fabricantes de instrumentos de precisin que fabrican, modifican o reparan instrumentos mecnicos. Tambin puede fabricar y modificar piezas para hacer o reparar mquinas herramientas o mantener mquinas industriales, aplicando conocimientos de mecnica, matemticas, propiedades del metal, diseo y procedimientos de mecanizado. Horario de trabajo: 4 das a la semana (lunes a jueves/ martes a viernes) de 15:15 a 1:45 horas. Lugar de trabajo: Bridgeville, PA. Responsabilidades: Manejo de mquinas o equipos - Manejar equipos y mquinas bsicos y realizar tareas rutinarias. Gestin de Operaciones - Llevar a cabo tareas operativas siguiendo los procesos establecidos. Mantenimiento y reparacin de equipos - Ayudar a mantener y reparar equipos realizando preparativos y prestando asistencia. Salud, seguridad y medio ambiente - Seguir instrucciones de trabajo bsicas obligatorias para salvaguardar el medio ambiente y el bienestar propio y de los dems. Cumplimiento operativo - Seguir un procedimiento obligatorio sencillo para garantizar que el trabajo se realiza de acuerdo con las normas de calidad exigidas y/o para garantizar el cumplimiento de los cdigos normativos externos y los cdigos de conducta internos. Utilizacin de equipos de precisin - Interpretar y utilizar equipos/instrumentos de medicin de precisin como micrmetros, relojes comparadores y medidores de profundidad. Instrucciones y planos - Capacidad para leer e interpretar planos y tolerancias geomtricas. Comunicaciones internas - Intercambiar informacin con las personas teniendo interacciones corteses con ellas. Polticas y procedimientos - Trabaja con orientacin para comprender las polticas y los procedimientos, al tiempo que se asegura de que coincidan con las estrategias y los objetivos de la organizacin. Otras tareas asignadas. Requisitos: HS Diploma / GED y / o 1-3 aos de experiencia relevante de mecanizado en un entorno de fabricacin o reparacin de operar tornos manuales, fresadoras o tornos CNC / fresas. Experiencia en autoprogramacin o edicin de programas. Destreza con herramientas de medicin de precisin, como calibres y micrmetros. Capacidad para trabajar en el turno de noche. Utiliza habilidades de comunicacin verbal claras y eficaces para expresar ideas y solicitar acciones. Trabaja con orientacin para planificar, organizar y priorizar actividades a fin de cumplir eficazmente los objetivos empresariales. Aplica conceptos elementales para gestionar y aplicar sistemas de trabajo seguros. Experiencia / habilidades preferidas: Experiencia en el mecanizado de piezas o productos similares. Alto volumen y variedad. Slida experiencia en la escritura de sus propios programas. Flowserve es un fabricante lder mundial y proveedor de servicios posventa de sistemas integrales de control de flujo. nete a una empresa cuya gente est comprometida con la construccin de un futuro ms sostenible para hacer del mundo un lugar mejor para todos. Con 16,000+ empleados en 50+ pases, combinamos nuestro alcance global con presencia local. Nuestro equipo se desafa a s mismo para abordar cada situacin con ingenio y creatividad para ayudar a brindar a nuestros clientes los productos y servicios de control de flujo ms innovadores. Apoyamos a 10,000+ clientes en todo el mundo, creando productos para satisfacer las necesidades de nuestros clientes que suministran energa, agua dulce, productos farmacuticos y otros elementos esenciales a consumidores, empresas y gobiernos a nivel mundial. Lo invitamos a poner en marcha sus talentos y su carrera en Flowserve. Req ID : R-14664

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! NEW HIRES ARE ELIGIBLE FOR A $2500 SIGN ON BONUS! APPLY TO FIND OUT MORE! Role Summary: Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. Work schedule: 4 days a week (Monday to Thursday/ Tuesday to Friday) from 3:15 pm to 1:45 am. Location: Bridgeville, PA. Responsibilities: Operating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: HS Diploma / GED and/or 1-3 years relevant machining experience in a manufacturing or repair environment operating manual lathes, milling machines, or CNC lathes/mills.Experience in self-programming or editing programs.Skilled with precision measuring tools, like calipers and micrometers.Ability to work the night shift.Uses clear and effective verbal communication skills to express ideas and request actions.Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Applies elementary concepts to manage and apply safe systems of work. Preferred Experience / Skills: Experience in working with machining similar parts or products. High volume and variety.Solid experience in writing their own programs. Req ID : R-14664 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Manual Machinist Role Summary: Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. Manual Lathe experience. New hires are eligible for a $2500.00 SIGN-ON BONUS! Apply to find out more! This is a First Shift Opportunity: 7:00am-3:30pm, Overtime when necessary. Responsibilities & Operating Manual Lathe Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: HS Diploma / GED and 3-5 years relevant experienceEquipment Experience – 2+ years machining experience in a manufacturing or repair environment operating manual lathes, milling machines.Experience Welding Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Has planning and organizing skills – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-14319 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.