FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Details Department: Radiation OncologySchedule: Weekdays 0800-1630. Occasional evening and weekend hours as needed.Hospital: Columbia St. Mary's MilwaukeeLocation: Milwaukee, WIBenefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your communityBenefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance and salary range at the time of the offer.Responsibilities Ensure the quality of care in the use of radiation-producing sources and imaging equipment, while protecting patients and staff from radiation.Perform required calibrations on equipment. Recommends and justifies new equipment and products for the department.Conduct equipment performance reviews as needed and implements quality control procedures for imaging devices.Recommend radiation safety procedures to areas using radiation.Educate staff in radiation safety practices.Support all physics aspects of patient treatment including consultation with radiation oncologists, calculation of radiation doses, design and fabrication of treatment aids and assurance of the accuracy of all treatment parametersRequirements Licensure / Certification / Registration:Medical Physicist credentialed from the American Board of Radiology obtained within 36 Months (3 years) of hire date or job transfer date required.Education:High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required.Additional Preferences No additional preferences.Why Join Our Team Ascension Wisconsin has been providing rewarding careers to healthcare professionals since 1848. Operating 17 hospital campuses and over 100 related healthcare facilities from Racine to Appleton, you will find opportunities that allow you to create a career path you love, all while delivering compassionate, personalized care to the communities we serve.Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states.Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you.Equal Employment Opportunity Employer Ascension will provide equal employment opportunities (EEO) to all associates and applicants for employment regardless of race, color, religion, national origin, citizenship, gender, sexual orientation, gender identification or expression, age, disability, marital status, amnesty, genetic information, carrier status or any other legally protected status or status as a covered veteran in accordance with applicable federal, state and local laws.For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish)poster.As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension.Pay Non-Discrimination NoticePlease note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants.This Ministry does not participate in E-Verify and therefore cannot employ STEM OPT candidates.

What you will do Johnson Controls is seeking an Electrical Engineering Manager to lead electronics hardware development for new product development (NPD) within our Controls & Building Automation Systems (BAS) division. In this role, you will drive the design and development of BAS controllers, sensors, thermostats, actuators, and refrigeration controllers, playing a critical role in shaping the next generation of smart building technologies.As the Electrical Engineering Manager, you will lead a team of design engineers, test engineers and technicians to oversee end-to-end product development, and collaborate with cross-functional teams to ensure our products meet performance, reliability, and regulatory standards. You will leverage your expertise in electronics design, embedded systems, and industrial controls to develop innovative, high-quality solutions that enhance energy efficiency, sustainability, and automation in commercial and industrial buildings.This position is based onsite in Glendale, WI. Candidates must be commuting distance or willing/able to relocate. If you are an experienced engineering leader passionate about building automation and new product development, we invite you to apply and help drive the next generation of Johnson Controls BAS solutions!Why Join Johnson Controls Lead the development of innovative BAS controllers and smart building solutions.Work with cutting-edge IoT, automation, and energy-efficient technologies.Competitive salary, benefits, and opportunities for professional growth.Be part of a company that is shaping the future of smart buildings and sustainability.If you are an experienced engineering leader passionate about building automation and new product development, we invite you to apply and help drive the next generation of Johnson Controls BAS solutions.How you will do it Leadership & Team Development:Lead, mentor, and develop a high-performing team of electrical engineers focused on new product development for BAS controllers and related devices.Foster a culture of innovation, problem-solving, and continuous improvement.Provide technical leadership in circuit design, embedded hardware, and power management for industrial automation products.Drive team growth through training, goal-setting, and performance management.Lead, coach and motivate HW team to achieve success and grow.New Product Development & Electronics Hardware Design:Oversee the design, prototyping, and validation of BAS controllers, sensors, thermostats, actuators, and refrigeration control systems.Determines best approach for engineering problem solving. Determines best approach for electronics hardware development cycle from concept to production.Expert in electronics circuit development , both digital and analog .Provides system level design architecture for new product development. Defines MCU / MPU platform strategy .Oversees and defines specifications for parts, design, and testing.Provide innovative idea generation in product development process improvements and refinements particularly as they apply to electronic hardware development.Lead the development of analog and digital circuits, microcontroller-based designs, wired/wireless communication interfaces (BACnet, Modbus, Zigbee, Bluetooth, Wi-Fi, etc.), and other electronics for Controls products.Ensure products meet performance, reliability, energy efficiency, and cybersecurity requirements for modern building automation solutions.Conduct and oversee design reviews, system simulations, and prototype testing to validate hardware performance.Drive DFMEA, DFM, and DFT strategies to ensure robust and manufacturable designs.Project & Process Management:Collaborate with product management, software, mechanical, and manufacturing teams to define specifications and technical requirements for new products.Manage the technical roadmap and development timelines for multiple new product initiatives.Ensure timely execution of NPD projects while maintaining design quality and regulatory compliance.Lead risk assessment, cost analysis, and design optimization efforts to enhance product competitiveness.Drive continuous improvement initiatives to streamline development cycles and reduce time-to-market.Regulatory & Compliance:Ensure compliance with industry standards and certifications relevant to BAS products, including UL, CE, FCC, ISO, and ASHRAE requirements.Lead EMC/EMI mitigation strategies and oversee product testing for compliance.Stay up to date with building automation regulations, energy efficiency standards, and cybersecurity best practices.What you will needRequired Bachelor’s or Master’s degree in Electrical Engineering, Electronics Engineering, or a related field.10+ years of experience in electronics hardware design and new product development, with at least 10 years in a leadership role.Proven track record in BAS controllers, industrial control systems, or IoT-enabled smart building technologies.Experience in end-to-end product development, from concept to production launch.Expertise in circuit design, microcontroller-based systems, power electronics, and wired/wireless communication protocols used in building automation.Proficiency in schematic capture and PCB layout tools (e.g., Altium, OrCAD, KiCad).Strong understanding of signal integrity, power management, and embedded system design for industrial and commercial applications.Hands-on experience with lab testing, debugging, and failure analysis.Knowledge of design for manufacturability (DFM) and design for testability (DFT) best practices.Strong analytical and problem-solving skills with a data-driven approach.Excellent communication and collaboration skills, with the ability to work across engineering, product management, and manufacturing teams.Ability to manage multiple NPD projects, balancing innovation with cost and time-to-market constraints.Passion for mentoring, team development, and building high-performance engineering teams.PreferredExperience with BACnet, Modbus, Zigbee, Wi-Fi, Bluetooth, and other IoT protocols

WHO YOU WILL WORK WITHYou will work closely with the GM, Product lead, Nike Sports Research Lab lead, Engineering and Design teams, Program Management and Finance, to bring safe and reliable products to market. You will work across the Nike matrix to build support from product testing functions across the company.WHO WE ARE LOOKING FORWe are looking for a Test/Design Verification Engineering Lead to join a newly formed team developing innovative, powered athlete products.WHAT YOU BRINGBachelor’s degree or equivalent combination of education, experience and trainingBachelor’s degree in engineering preferred7+ years of relevant industry experienceDemonstrated ability to effectively work cross-functionally with Product Development, Engineering, QA.Specific experience operating automated test equipment including Instron machines. Electropulse a plus.Experience in validation and experimentation design to prove/disprove system or product functionality, reliability, and specification call-outs.Problem-solving and troubleshooting skills.Interpersonal and written communication skills.Experience with Python and grasshopper a plusResults orientation, team skills, ability to multi-task, ability to learn quickly, ability to respond to urgent needs of the team and deliver expected results within expected deadlines.Ability to serve as a technical resource for assessing validation requirements, solving test related problems, and drawing on resources across the organization to build effective test infrastructure.Proficiency in statistical analysis.Positive energy, curiosity, and a passion for building magical products that users love.Strong technical savvy and understanding/curiosity about emerging innovative technologies.Ability to work in a fast-paced environment where continuous learning is core to our identity.Willingness to roll up your sleeves to win as a team.WHAT YOU WILL WORK ONAs Test / DVE Lead, you will play a critical role in driving the execution of our powered athlete product roadmap. You will be responsible for ensuring that products shipped meet all applicable quality and performance criteria, validating functionality, reliability, and performance of products/prototypes using existing and invented quality metrics.IN THIS ROLE YOU WILL• Validate and test product performance and reliability from creation through production, with specific focus on digital footwear integration.• Participate in definition and execution of consumer product test and validation with specific focus on root-cause analysis of failure modes, and integration of detailed testing as a component in quality product development.• Manage of multiple external vendors/consultants (both domestic and international) in product development and test support, as well as direct interaction with Wear Test Coordinators in the footwear categories supporting management of long term and short-term wear testing.• Develop test procedures and metrics to assess product performance where no best-practice guidelines for testing or qualification exist; develop test and measurement systems as needed.• Drive test/validation methodology improvements, as well as process improvement and feedback to the engineering process. Participate in the early-stage engineering and product development process to provide footwear insight into the design process from the start.• Assist in specification and execution of quality, accuracy, and testing procedures across multiple partners and disciplines including traditional reliability testing, four corner testing, performance validation, and software quality assurance.• Utilize a wide range of appropriate statistical methodologies and techniques to demonstrate quality and efficacy. • Provide input on the equipment/process/software validation requirements and design control activities for new product development projects.We offer a number of accommodations to complete our interview process including screen readers, sign language interpreters, accessible and single location for in-person interviews, closed captioning, and other reasonable modifications as needed. If you discover, as you navigate our application process, that you need assistance or an accommodation due to a disability, please complete the Candidate Accommodation Request Form.

Description Leidos is seeking a Civil Engineer to join the National Airspace System Integration Support Contract (NISC IV) Team, providing support to the Federal Aviation Administration's (FAA) Infrastructure Engineering Center.Location: Des Plaines, IL Travel: 25-35% Civil Engineer Primary Responsibilities: Provide technical support to the Infrastructure Engineering Center, for accomplishment of project engineering packages:Develop site specific project plans and specifications for solicitation and contracting of engineering projects for FAA approval and acceptance.Perform site surveys to collect site-specific project data and research all standards, construction codes and ordinances.Provide analysis, recommendations, and solutions to issues identified during the site survey.Compile and complete project documents as follows:Scope of work and project transmittal.Drawing and specification lists.Operational Risk Management checklists.Furnish information required for the preparation of Purchase Requests (PR) for assigned projects.Furnish information required for the preparation of Change Proposals for assigned projects.List of Government furnished properties.Airspace case documents.Assessment of engineering impacts on Environmental & Safety Compliance Program Project checklists.Drawings and specifications.Engineering cost estimate for project plans per FAA Standard/guidelines.Estimated completion time and project schedule.Provide technical engineering support for all phases of assigned new construction and renovation projects (such as evaluate shop drawings, design proposals, and interpret the technical requirements for adherence to contract documents).Participate in Joint Acceptance Inspections and Contractor Acceptance Inspections on all assigned projects and provide recommended resolutions on all items relating to engineering.Perform engineering studies for feasibility and cost versus benefit.Provide technical input to the Government Technical Interpreter in actions to plan, budget, program, and coordinate the development of engineering projects.Develop project drawings in accordance with the FAA Standard/guidelines.Civil Engineer Required Qualifications:- Bachelor of Science and 4+ years of experience with Civil Engineering Design and experience with tower, shelter, and similar structure projects.- Ability to obtain a Public Trust Security Clearance Suitability.- Knowledge of multiple of the following, Unstaffed Infrastructure Sustainment (UIS) facilities:Metal equipment towersCommercial/Industrial StructuresRoof ReplacementsEmergency and battery backup systems (Small Engine Generators and/or Battery Backup Systems)Small HVAC systemsRemote site workRoad designConcreteSite gradingEquipment sheltersConcrete foundationsStructuralEnvironmental permitting (NEPA, ARAP, stormwater, etc)Lightning protection and groundingHazmat (Pb, Asbestos) abatementConstruction risk managementSoftware: (Project management software (CWP, Primavera, Microsoft project, etc) and/ or Computer aided design (AutoCAD, Microstation)Utility layout design: water, power, comm, sewerCivil Engineer Preferred Qualifications:Proficiency in AUTOCAD.Knowledge of Heating Ventilating and Air Conditioning (HVAC), power, general building construction techniques, Hazardous Materials (HAZMAT), fire detection, security, site work.Why Leidos Grow with Us: Be part of a company that values innovation and encourages professional development.Make a Difference: Your work will directly contribute to safer, more efficient airspace for everyone.Ready to take your career to new heights Join Leidos and help us transform the future!Targeted salary will be $105,000.00 - $115,00.00, based on experience. Original Posting:April 15, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $72,150.00 - $130,425.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

About the RoleAs Data Scientist II, you will work with a data science team and cross-functional partners to solve business challenges, promote data-driven decision-making with advanced data analysis and machine learning and develop products that strongly impact Kohl’s revenue and customers. As a senior member of the Data Science organization, you will be the technical expert for a team that builds models for initiatives such as recommender systems, NLP, image recognition, segmentation and user behaviors. You will take a mentorship role within the DS team and work collaboratively with other business areas.What You’ll DoLead exploratory data analysis to cull actionable insightsCollaborate with stakeholders to understand business requirements and translate them into technical solutionsDevelop and implement statistical and machine learning models Fine-tune, optimize and ensure the scalability of models and algorithmsAid in designing experiments to answer targeted questionsIdentify and drive continuous improvement of key business metrics in an assigned business functional areaDrive adoption and usage of data science products and modelsTranslate data science outputs into business outcomes and value deliveredMentor and guide junior data scientists, providing technical expertise and fostering a culture of continuous learning and developmentStay up to date on the latest trends and developments in data science and technology and identify implementation opportunities to support innovation at Kohl’sAdditional tasks may be assignedWhat Skills You HaveRequiredBachelor’s Degree in Data Science, Computer Science, Statistics, Applied Mathematics or equivalent quantitative field3+ years of progressively complex Data Science in the Recommendation Systems field, solving problems at scaleExtensive experience developing and deploying state-of-the-art algorithms using machine learning, statistical and optimization methods Experience with machine learning frameworks such as TensorFlow, PyTorch, GBQ, Spark MLlib, Keras or scikit-learnExperience in one or more areas of advanced data science (Recommender Systems, NLP, Deep Learning, Computer Vision, Generative AI, etc.)PreferredMaster’s degree and/or Ph.DRetail experienceMarketing models

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaid vacation/holidays/sick time -15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care -Available day oneExtensive product and on the job/cross training opportunitieswith outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out!A Day in the Life at JCIWhat you will doUnder general direction, responsible for the design, configuration, and operation of complete building control systems including fire, security, and other low voltage control sub-systems (i.e., lighting, nurse call, data networks, etc.) to meet the intent of the project requirements.Accountable to field teams for quality, timeliness and efficiency of designs. Develops complex software programs, commissioning and solving to ensure proper operations of the building control system.Provides detailed information and submittals to communicate design and operation to customers, consultants, Johnson Controls field installation team and subcontractors.How you will do itDesigns and configures technically complex building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, bill of material, network layouts and electrical schematics as required.Develops and tests software programs necessary to operate the system per the project requirements' intent.Coordinates and creates necessary drawings and equipment schedules for submittals and installation.Selects, orders, and tracks the delivery of materials for assigned projects.Coordinates factory-mounting processes to meet factory and project schedule.Assists in the loading and commissioning of all system and network-level controllers as required.Assists in validation of complete system functionality and solves problems with subcontractors and other trades to ensure proper operation.Provides field change information to the project team for the creation of as-built drawings and software.Keeps management and JCI contractor or customer informed of job progress and issues.Assists in performing site-specific training for owner/operator on the total building control system.Participates in release meeting with project field team.Performs value engineering to provide cost effective results while maintaining customer satisfaction.May provide work direction to Systems Design Assistants.Adheres to safety standards with a high degree of employee and subcontractor safety.Travel is required for this role.What we look forRequiredBachelor’s degree in engineering and minimum 3 years' experience·Demonstrated knowledge of the construction or HVAC industry.Demonstrated knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems.Experience with JCI software programmingDemonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e., LON, BACnet, etc.).Ability to relate technical knowledge to a non-technical audience.Demonstrated advanced computer skills required, particularly computer-related drafting tools.Ability to travel regularly.HIRING SALARY RANGE: $73,055-105,700 (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at https://www.johnsoncontrols.com/careers#LI-AD2#LI-DS1

Description Looking for an opportunity to make an impact At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainable. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.If this sounds like the kind of environment where you can thrive, keep reading!The Digital Modernization Sector brings together our digital transformation and IT programs, allowing us to better serve our customers through scale and repeatability.(Group Profile/Link to Group page) - https://www.leidos.com/capabilities/digital-modernizationYour Next Great Adventure Awaits!This position is located in Des Plaines, IL.The Leidos Civil Group is seeking a dynamic Power / Electrical Engineer to join the National Airspace System Integration Support Contract (NISC IV) team.In this role you will support the Federal Aviation Administration's (FAA) Central Service Area (CSA) NISC support team with the goal of providing outstanding customer service to the FAA.Provide the CSA Infrastructure Engineering Center, Great Lakes Regional Office assistance in planning, cost estimating, scheduling, engineering, coordination, contracting, installation, inspection, and acceptance of electrical systems/services as part of the Central Service Area (CSA) implementation of a wide variety of NAS Infrastructure programs and projects, which include of the electrical generator replacement program.The projects will range over the geographic scope of the CSA and ensure accuracy of design, products, and timeliness of project completion.Specific duties for the position include:Plan and design electrical systems for a variety of FAA buildings and structures.Perform on-site surveys to develop “to-scale” designs and detailed reports,Generate sketches showing relation of proposed installation in existing or new facilities with exact specifications and dimensions.Test and analyze power systems and participate in construction inspections and final inspections inclusive of CAI and JAI.Confer with engineering staff and other personnel to identify and resolve problems with the design or implementation.Coordinate design components with a multi-disciplinary team and generate drawings, wiring diagrams, and wiring schematics as required for site-specific modifications and new construction.Prepare Microstation-generated construction drawings and prepare site-specific specifications and contract documents and independent cost estimates.Generate and coordinate the Integrated Risk Management Checklists (IRMC), communication plans, project risk register, to meet Operational Risk Management (ORM) requirements.Coordinate and complete Work Permits required for potential impact to lead and asbestos that may be encountered during construction.Participate in meetings inclusive of the pre-construction meeting and on-site construction meetings with stakeholders to coordinate electrical systems with other ongoing construction and projects.Plan, schedule, and coordinate construction project activities to meet milestones and deadlines; working directly with stakeholders and contractors.Manage and participate in on-site cutovers, testing and restoration of facilities.Prepare, maintain, and provide periodic updates of project to team, management, and stakeholders.Manage multiple projects towards successful on-time completion.Review contractor design and construction submittals.Perform internal design reviews of FAA designed power projects.Track and reconcile and coordinate closure of JAI project exceptions. Basic Qualifications:Must have an Electrical Engineering or Power related degree from an accredited College/University and a minimum of 4 to 8 years of prior relevant experience.At least four years of experience designing electrical distribution for commercial, industrial and/or government facilities, including standby engine generator and un-interruptible power systems (UPS)Must have experience with power system analysis software such as EDSA Power Analytics and SKM Systems Analysis Power Tools with solid understanding of arc flash studies.Must be able to conduct and interpret power studies.Working knowledge of MS Office Suites (Word, Excel, Power Point), Engineering Scheduling tools and applications, and be able to use the Internet as a gathering and communicating tool.Proficiency with AUTOCAD / MICROSTATION.Ability to accomplish clear and concise general and technical writing and tactfully coordinate with a variety of project stake holders, peers and management levels.Ability to maintain an electronic project folder (as required) related to site preparation and equipment installation problems.Ability to provide technical assistance and recommendations regarding the closure of construction related punch-list items.Ability to conduct efficient, organized data gathering, and data analysis.Ability to develop project plans, establish project schedules, project estimates.Must be able to pass FAA Public Trust (you must be either a US Citizen or Green Card Holder who has resided in the US for the pass three years to qualify for Public Trust)Must be able to pass a Drug Screen prior to starting with LeidosOriginal Posting:February 27, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $85,150.00 - $153,925.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Description Have you ever wondered what it would be like to work with one of the BEST in government contracting Ranked by Forbes in 2018 as a Top government contractor and one of the World's Most Ethical Companies, Team Leidos is one you don't want to overlook.Everything we do is built on commitment to do the right thing for our customers, our employees and our community. We embrace and solve some of the worlds toughest challenges. We're focused on ensuring our customers have the right tools, technologies and tactics to keep pace with an ever evolving world landscape. We know once you join Team Leidos, you are sure to go home at the end of each day knowing YOU MADE A DIFFERENCE, resulting in one of the most REWARDING careers you could have imagined. We Want You!The National Airspace Systems Integration Support (NISC) program at Leidos is seeking an Electronics Engineer to provide support to the Federal Aviation Administration (FAA) Central Service Area - Engineering Services Group located in Des Plaines, IL.The ideal candidate will support the daily operations of the FAA Enterprise Network Services (FENS) Program. FENS is the successor to the FAA Telecommunications Infrastructure (FTI) contract, which was implemented in 2002 to provide over 30,000 communications services to more than 4,500 facilities within the National Airspace System.The program aims to design, build, operate and maintain the FAA's next-generation communications platform and to build a dynamic, highly available and secure enterprise network to support all the agency's mission-critical applications across the NAS.Job Duties Include:Evaluate existing site surveys to develop scope of work for site preparation requirementsConduct site surveys at remote sites for FENS site preparation requirementsDraft site preparation scope of work for facilities based on site survey reports and facility dataIdentify FENS contract CLINs required to complete site preparationDevelop cost estimates for site preparationReview contractor site prep proposals for accuracy and compliance with scope of workGenerate ORM PRP’s for site preparation and installation of FENS equipmentWork with SSC/TSC/AT to implement risk mitigations for FENS implementationCoordinate and scheduled site preparation activities with SSC/TSC/AT/FENS personnelOversee site prep and installation work performed by FENS contractorGenerate periodic status reportsUpdate Corporate Work Plan (CWP) dataUpdate facility drawings (red lines) for draftingBasic Qualifications:Electronics Engineering Degree (B.S.) with a minimum of 2 years’ experience.Ability to travel 25%-50%.Ability to obtain a Public Trust Suitability. (To be eligible for the FAA Public Trust you must be a US Citizen or a Green Card Holder who has resided in the US for the past 3 years).Proficiency in MS Office Suites.Proficient working with AutoCAD or similar toolsDesired Qualifications:Knowledge of National Electric Code (NEC), National Fire Protection Assoc (NFPA) standards, National Airspace System Equipment TowerKnowledge of OSHA and general construction and electrical safety standards.Knowledge of NAS facilities such as ASR, ATCT, VOR, ARSR, RCAG.(NASET),NationalAirspace System Equipment Building (NASEB).Knowledge of Corporate Work Plan (CWP) 4.1.12Original Posting:February 28, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $67,600.00 - $122,200.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.