FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Details Department: Radiation OncologySchedule: Weekdays 0800-1630. Occasional evening and weekend hours as needed.Hospital: Columbia St. Mary's MilwaukeeLocation: Milwaukee, WIBenefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your communityBenefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance and salary range at the time of the offer.Responsibilities Ensure the quality of care in the use of radiation-producing sources and imaging equipment, while protecting patients and staff from radiation.Perform required calibrations on equipment. Recommends and justifies new equipment and products for the department.Conduct equipment performance reviews as needed and implements quality control procedures for imaging devices.Recommend radiation safety procedures to areas using radiation.Educate staff in radiation safety practices.Support all physics aspects of patient treatment including consultation with radiation oncologists, calculation of radiation doses, design and fabrication of treatment aids and assurance of the accuracy of all treatment parametersRequirements Licensure / Certification / Registration:Medical Physicist credentialed from the American Board of Radiology obtained within 36 Months (3 years) of hire date or job transfer date required.Education:High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required.Additional Preferences No additional preferences.Why Join Our Team Ascension Wisconsin has been providing rewarding careers to healthcare professionals since 1848. Operating 17 hospital campuses and over 100 related healthcare facilities from Racine to Appleton, you will find opportunities that allow you to create a career path you love, all while delivering compassionate, personalized care to the communities we serve.Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states.Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you.Equal Employment Opportunity Employer Ascension will provide equal employment opportunities (EEO) to all associates and applicants for employment regardless of race, color, religion, national origin, citizenship, gender, sexual orientation, gender identification or expression, age, disability, marital status, amnesty, genetic information, carrier status or any other legally protected status or status as a covered veteran in accordance with applicable federal, state and local laws.For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish)poster.As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension.Pay Non-Discrimination NoticePlease note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants.This Ministry does not participate in E-Verify and therefore cannot employ STEM OPT candidates.

Position:Sales Engineer - CloudHealthJob Description:Arrow is seeking a Sales Engineer - CloudHealth - to provide technical direction and business guidance to our channel partner community in North America. As a Sales Engineer, you will be accountable for partner enablement goals by driving innovative technical programs and overseeing day-to-day technical account-level activities. You willbe responsible for evangelizing, positioning, and architecting solutions for channel partners within your assigned region or technology focus. The successful candidate will have deep knowledge of AWS, Azure, GCP, and adjacent solutions.What You’ll Be Doing:Works in partnership with sales and marketing teams to develop and implement specific industry and account penetration strategies, produce account specific product and sales enablement plans, provide assessments and drive leads from identification to sale completion.Provides technical leadership and direction to channel partners and sales staff with pre-sales activities in the assigned market on behalf Arrow’s supplier Broadcom (CloudHealth)Leads in the discovery, analysis, design, demonstration, and refinement of fully integrated technology solutionsDemonstrates technical leadership and subject matter expertise on FinOps Public Cloud Management, including visibility, optimization, and governance.Acts as technical expert and consultant to develop and propose solutions that meet the technology and business requirements of assigned channel partners and their end usersMakes technical and sales presentations to channel partner’s technical and sales staffWorking with Arrow marketing teams to create and produce digital channel-ready technical content that is published to Arrow social media sites and networksServes as a trusted technology influencer to channel partners and serves as an internal Arrow resource on technical plays or specific business applications and outcomes within an assigned market segmentSuccessfully builds relationships with the Arrow account team, partners and end users in support of sales objectives; engages and leverages Arrow horizontal resources, abilities, budgets and personnel as appropriateLeads CloudHealth technical sales calls with and on behalf of channel partnersQualifies CloudHealth sales opportunities in the terms of end customer technical requirements, competition, decision making process and funding in partnership with Arrow channel partnersWhat We Are Looking For:Requires functional knowledge of FinOps, AWS, Azure, and GCPPrior experience in a pre-sales engineer or customer facing role is preferredRelated industry experience and/or certifications in FinOps, AWS, Azure, and GCP preferredAbility to prioritize and meet deadlinesResults drivenEntrepreneurial mindsetHigh level of business and sales acumenStrong organizational and interpersonal abilitiesCustomer focusedAbility to conduct effective group presentations and/or trainings#LI-EK1Experience / EducationTypically requires a minimum of 8 years of related experience with a 4 year degree; or 6 years and an advanced degree; or equivalent experience.Work ArrangementFully Remote: Must be able to travel to an Arrow office location as requested by Arrow leadership.What’s In It For You:At Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That’s why we offer competitive financial compensation, including various compensation plans and a solid benefits package.Medical, Dental, Vision Insurance401k, With Matching ContributionsShort-Term/Long-Term Disability InsuranceHealth Savings Account (HSA)/Health Reimbursement Account (HRA) OptionsPaid Time Off (including sick, holiday, vacation, etc.)Tuition ReimbursementGrowth OpportunitiesAnd more!Annual Hiring Range/Hourly Rate:$105,300.00 - $165,000.00Actual compensation offer to candidate may vary from posted hiring range based upon geographic location, work experience, education, and/or skill level. The pay ratio between base pay and target incentive (if applicable) will be finalized at offer.Location:US-GA-Georgia (Remote Employees)Remote work employees may be required to be present at the closest designated Arrow office for work-related purposes, at the Company’s request and sole discretion.Time Type:Full timeJob Category:SalesEEO Statement:Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status.(Arrow EEO/AAP policy)We anticipate this requisition will be open for a minimum of five days, though it may be open for a longer period of time. We encourage your prompt application.In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

Compensation Type: Hourly Highgate Hotels: Highgate is a premier real estate investment and hospitality management company widely recognized as an innovator in the industry. Highgate is the dominant player in U.S. gateway markets including New York, Boston, Miami, San Francisco and Honolulu, with a rapidly expanding presence in Europe, Latin America, and the Caribbean. Highgate’s portfolio of global properties represents an aggregate asset value exceeding $20B and generates over $5B in cumulative revenues. The company provides expert guidance through all stages of the hospitality property cycle, from planning and development through recapitalization or disposition. Highgate also has the creativity and bandwidth to develop bespoke hotel brands and utilizes industry-leading proprietary revenue management tools that identify and predict evolving market dynamics to drive out performance and maximize asset value. With an executive team consisting of some of the industry’s most experienced hotel management leaders, the company is a trusted partner for top ownership groups and major hotel brands. Highgate maintains corporate offices in London, New York, Dallas, and Seattle. Location: Residence Inn Ohare/Rosemont7101 Chestnut StRosemont, IL60018 Overview: The Engineer, Level 1, is responsible for ensuring that the property is maintained in the best possible condition at all times with the least amount of inconvenience to customers and employees. Responsibilities: Make repairs to hotel air conditioning system: change filters, clean coils, replace motors.Perform preventive maintenance on all equipment (i.e. boilers, chillers, HVAC-Heating Ventilation and Air Conditioning, electrical, etc.).Take required readings on equipment.Test cooling tower and record readings.Replace and program televisions as needed.Replace light switches, receptacles, light bulbs and fixtures.Perform furniture repair.Replace and repair pumps.Perform plumbing repairs (i.e. clogged drains, copper pipe, change washers, change handles, drain fittings, etc).Understand and be able to read blueprints and wiring diagrams.Trace and repair all types of water lines.Troubleshoot and repair kitchen equipment.Maintain repair and preventive maintenance records.Perform and maintain work to local, state and Federal codes.Test, clean and repair swimming pools and spas.Paint designated areas.Repair and finish sheet rock.Repair all types of wall coverings.Repair and program hotel electronic lock system. Qualifications: High School diploma or equivalent and/or experience in a hotel or a related field required.At least one year of progressive experience in a hotel or related field preferred.Trade school and/or College course work in related field helpful.Flexible and long hours sometimes required.Heavy work - Exerting in excess of 100 pounds of force occasionally, and/or in excess of 50 pounds of force frequently and/or in excess of 20 pounds Must be able to effectively communicate both verbally and written, with all level of employees and guests in an attentive, friendly courteouse and service oriented manner.Must be effective at listening to, understanding, and clarifying concerns raised by employees and guests.Must be able to multitask and prioritize departmental functions to meet deadlines.Approach all encounters with guests and employees in an attentive, friendly, courteous and service-oriented manner.Attend all hotel required meetings and trainings.Maintain regular attendance in compliance with Highgate Hotel Standards, as required by scheduling, which will vary according to the needs of the hotel.Maintain high standards of personal appearance and grooming, which includes wearing the proper uniform and nametag.Comply with Highgate Hotel Standards and regulations to encourage safe and efficient hotel operations.Maximize efforts towards productivity, identify problem areas and assist in implementing solutions.Must be effective in handling problems, including anticipating, preventing, identifying and solving problems as necessary.Must be able to understand and apply complex information, data, etc. from various sources to meet appropriate objectives.Must be able to cross-train in other hotel related areas.Must be able to maintain confidentiality of information.Must be able to show initiative, including anticipating guest or operational needs.Perform other duties as requested by management.

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONLead activities relating to designing, building, testing, implementing, and maintaining solutions, products, and processes under the guidance of a Principal Data Engineer or Manager. Coach and/or mentor less experienced team members. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESPlan all tasks within a SDLC phase including estimating, scope definition and work plan development. Coordinates planning, design and production of deliverables for the training phase. Sought by others for advice. Assists in reviewing deliverables of the SDLC phase. Develops accurate budgets and schedules tasks/staffing. Participates in the integration of this phase to others. Reviews all tasks within a phase to ensure overall quality and accuracy. (System Development Life Cycle) (40%)Maintain and enhance engagement with business and IT partners and other stakeholders (20%)Create documentation for products and services. Use best practices to improve products and services provided to business unit partners, and monitor adherence within Team/Group to standards as defined within the Management Model (15%)Establish positive team environment by assisting and training less experienced personnel. (15%)Proactively build and develop others' technical knowledge and business acumen (10%) Job Scope: JOB SCOPESolves moderate to highly complex problems, inclusive of partner with vendors and other IT professionals to do so. (Critical Thinking & Problem Solving) Can function as a liaison with database administration to communicate data requirements that must be implemented in a DBMS. Has knowledge of at least one DBMS. Able to code and implement extensions to a data dictionary or repository. (Data Warehouse) Develops security policies and guidelines for users and management. Guides the development of business rules of use as they relate to data security. Creates procedures for data access, protection, and backup. Works closely with cyber threat intelligence analysts, cyber forensics analysts and incident response teams to understand how their challenges can be addressed with data analysis and data science efforts. (Data Security) Independently makes informed decisions on monitoring settings such as sample size, level of criticality, and self-healing opportunities. (Troubleshooting & Monitoring) Contributes to strategic planning in areas which require expert Big Data knowledge and experience. Participates in advanced technology efforts for the company, evaluating and testing new products to determine their value and applicability to the organization. Often takes a lead role in critical situations where there is a need to apply knowledge of Big Data technological trends, emerging technology and/or new tools and products. Successfully selects and implements Big Data technology to meet requirements of state-of-the-art systems and projects. (Big Data Technologies) Drives innovation process with regular evaluation and consistent application of lessons learned while implementing innovative improvements for future tasks. (Innovation) Works under limited supervision. Minimum Qualifications: MINIMUM QUALIFICATIONSBachelor's degree in computer science or related discipline and 4-7 years' relevant experience in data warehouse design, business intelligence reporting and ETL/TLT processing or 6-9 equivalent combination of education and work experience.Demonstrates high levels of knowledge in new and emerging Big Data technologies. (Big Data Technologies)Understands how work contributes to the bottom line. (business acumen)Maintain advanced knowledge of new technologies or technology opportunities and analysis of their use for business and/or IT clients. Develops white papers, conducting presentations as needed. (Cloud Technologies)Detailed knowledge of the data architecture of the systems which support more than one core business area. (Data Architecture)Mastery of Data Interpretation in practical applications of a difficult nature. (Data Interpretation)Demonstrates a thorough understanding of industry data security standards including trends and advancements. (Data Security)Has designed and implemented enterprise-wide standards, including business definitions and naming standards. (Data Warehouse)Demonstrates successful collaborative negotiation skills. Capable of building trust and gaining commitment in volatile environments to achieve results. Able to take a firm bargaining position while maintaining harmony with others. (Negotiation Skills & Relationship Management & Consulting)Experience performing as a team leader contributing to the effectiveness of the interview team with stakeholders to identify business needs and opportunities. (Requirements Gathering)Proficient in PowerShell, Ansible, or other appropriate scripting tool and able to independently create, modify, and troubleshoot scripts for automation, reporting, and monitoring tasks. (Scripting/Automation)Demonstrates a high proficiency for disseminating information to users, management, customers and others who have limited knowledge of the subject. (system documentation)Demonstrates expertise in resolving challenging problems involving usage of a variety of tools. (Technical Tools and Products)Demonstration of advanced capabilities to apply monitoring tools. (Troubleshooting & Monitoring) Preferred Qualifications: PREFERRED QUALIFICATIONSPossess expertise in cloud technologiesProficient in the Azure cloud platform and its applicationsExperience in Databricks technologies with Databricks warehouse expertiseExperience in ODI, IDMC, ADF, Synapse o Familiarity on Oracle Golden Gate, cosmos DB, Hyperscale DBProficient with big data technologies such as SparkExperienced in data cleaning, preprocessing, and transforming data into readable formats for analysisComprehensive understanding of ETL and data warehouse conceptsCapable of managing multiple ongoing projects and ensuring timely deliveryOptimizing techniques for different data Format (SCD1,2, Parquet, GIS, Timeseries)Experience writing technical design specifications for data integrations and data transformations with structured and unstructured data.Experience with Scrum development methodologyExperience with writing business cases. Experience in capturing, analyzing and translating business needs into functional IT requirementsExperience developing data integrations and data transformations with structured and unstructured data. SQL (DML, DCL, DDL) expertise with Oracle 11g through 12c and Microsoft SQL Server 2008r2 through 2016Experience with the setup and configuration of Automic UC4 scheduler on RHEL, Oracle Data Integrator (ODI), Oracle Warehouse Builder (OWB), Oracle Business Intelligence (OBI), Oracle Enterprise Manager (OEM), Oracle HTTP Server (OHS), WebLogic, Informatica, Business Objects, SAS software for data analytics, Kafka, Nifi, UC4, Red Hat Enterprise Linux.Application re-engineering, data modeling and performance tuning. Architecture and design for application disaster recovery and high availability: HP ALM, Microsoft Azure DevOps, Customer Information Systems (for example: CIMs, CC&B, SAP CRM&B),AMI Meter Data Management Systems (for example: Oracle Utilities MDM, Itron IEE), Geographic Information Systems (for example: GE Smallworld), Outage Management Systems, Itron/SSN UtilityIQ, Xylem/Sensus AMI, OSI Soft PI HistorianExperience managing IT projects using Agile/Scrum and waterfall methodologies Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $109,600.00/Yr. – $150,700.00/Yr. Annual Bonus for eligible positions: % 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

Sr. NPD Project Engineer - Mechanical The Sr NPD Project Engineer will support product realization through cross-functional team collaboration. Responsible for managing portions of the new product design process As a Sr. NPD Project Engineer - Mechanical you will: Be responsible for leading portions of the design process, completing assigned tasks, assisting other members of the team, and helping to ensure project completion in accordance with the schedule.Develop schedules, coordinate and manage low complexity projects of with little to no supervision.Prepare budgets and defines resource needs for projects or parts of projects in area of responsibility.Assist with completion of the Product Realization Stage Gate Requirements.Be responsible for ensuring that project meets requirements of specifications and standards, while promoting error-proof assembly.Be responsible for creation of project test plan and completion of inside and outside test programs.Construct and test prototype components or assemblies as required in the development and approval process.Be responsible for reviewing test data and ensuring testing is in line with the test plan and pre-test calculations and meets or exceeds G&W requirements.Perform engineering analysis in design of new products and their subcomponentsPerform formal root cause analysis and troubleshooting on the new and existing products and processesPrepare written documentation of processes, material requirements, test results and project activity as required.Interface with purchasing and vendors in the selection and approval of component parts and assemblies.Provide Engineering support to Sales/Marketing and Manufacturing on new and existing products and processes.Consult with Customer representatives to discuss product requirements and specifications when design or manufacturing problems are involvedGive direction to supporting personnel such as Engineers, Designers, and Technicians.Follow established procedures for creation and maintenance of CAD databases and libraries.Participate in the review of engineering drawings prior to the release to manufacture. Responsible for final approval of applicable drawings.Ensure that selected parts and processes meet project and company goals for cost efficiency and reliability.Perform other duties as assigned possibly We are looking for someone with: A Bachelor's Degree in Mechanical Engineering5+ years progressive experience in Engineering design and/or development to include Experience working on highly technical and innovative projects with demonstrated ability to be constantly challenged with new problems3D parametric modelingRunning finite element modeling and check design feasibility within mechanical, thermal and multi-physics environment. Strong technical knowledge required in mechanism design, linkages, springs, statics, dynamics and material propertiesFamiliarity with various manufacturing methods to include casting, machining, molding, stamping and formingFamiliarity with new product development Stage Gate Process.The ability to write technical documents, like test reports, engineering standards and technical papers.The ability to read and interpret technical standards.The ability to effectively communicate (verbal, written, presentations) across all levels of the organization.Proven experience with Microsoft Office SuiteExperience with DFMEA and DOE required.Experience with GD&T and tolerance stack up analysis.The ability to use small hand and power tools. Ideally you will have: ProE/Creo and Finite Element analysis A history of creativity, innovation, and initiative. A self-starter driven to learn new methodologies.Experience in medium/high voltage electrical power systems a plusExperience with trip free, stored energy or actuated mechanism design a plus. The Physical Demands / Working Conditions of the role are: General Office Environment, PC useLight Lifting (occasional 25 lbs or less)StoopingStandingHeavy Lifting (frequent 25 lbs +) What we offer you: Typical pay is $94,200 - 122,500 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision InsuranceShort and Long-Term DisabilityLife InsuranceHealth club membership program and reimbursementEmployee Assistance ProgramTuition Reimbursement401 (k)Annual Profit SharingVacationAir-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: https://www.youtube.com/watch v=DMtAhsdYeUQ G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Lead .NET Engineer ( Onsite) Cognizant Digital Practice helps clients reinvent products, experiences, and business models to build new value, differentiation, and drive revenue in the digital economy. We take an Experience centered approach which uses human insights to take ideas from vision to outcome and building end to end experience solutions that enable brands to transform their customer and employee experiences using design, marketing, and commerce capabilities Location: Chicago Illinois ( Onsite) **Cognizant will only consider applicants for this position who are legally authorized to work in the United States** Responsibilities Develop test and maintain high-quality software applications using SQL Server C# SQL Azure and .Net Framework. Collaborate with cross-functional teams to define design and ship new features. Provide technical guidance and mentorship to junior developers. Ensure the performance quality and responsiveness of applications. Identify and correct bottlenecks and fix bugs. Participate in code reviews to maintain code quality and share knowledge. Qualifications 12+ years of experience Possess strong experience in SQL Server C# SQL Azure and .Net Framework. Have a good understanding of the Sales & Marketing domain. Good experience in AWS Serverless App Repository, AWS / GCP / Azure Cloud, Azure DevOps Pipeline, Azure DevOps, ASP.NET Core, .Net Framework, .NET Dev Tools & Best Practice, .Net API, and .Net Core. Demonstrate excellent problem-solving and analytical skills. Exhibit strong communication and collaboration abilities Have a proven track record of delivering high-quality software solutions. Salary and Other Compensation: Applications will be accepted until 4/15/2025. The annual salary for this position is between $100k – $141k depending on experience and other qualifications of the successful candidate. This position is also eligible for Cognizant’s discretionary annual incentive program, based on performance and subject to the terms of Cognizant’s applicable plans. Benefits: Cognizant offers the following benefits for this position, subject to applicable eligibility requirements: Medical/Dental/Vision/Life Insurance Paid holidays plus Paid Time Off 401(k) plan and contributions Long-term/Short-term Disability Paid Parental Leave Employee Stock Purchase Plan Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. Cognizant reserves the right to modify this information at any time, subject to applicable law. Why Choose Cognizant Our associates enjoy robust benefits and training opportunities from our industry recognized, award winning Academy team. You will have access to hundreds of technical trainings to keep your abilities fresh and have opportunities to acquire certifications on the newest technologies. If you became comfortable with ambiguity, delight by change, and excel through autonomy, we’d love to hear from you! Cognizant is an equal opportunity employer provider and committed to creating a diverse environment. We consider all applicants without regard to race, creed, color, national origin, ancestry, age, marital and family status, disabilities, sexual orientation or preference, veteran status or any other classification protected by state, federal or local law.

WHO YOU WILL WORK WITHYou will work closely with the GM, Product lead, Nike Sports Research Lab lead, Engineering and Design teams, Program Management and Finance, to bring safe and reliable products to market. You will work across the Nike matrix to build support from product testing functions across the company.WHO WE ARE LOOKING FORWe are looking for a Test/Design Verification Engineering Lead to join a newly formed team developing innovative, powered athlete products.WHAT YOU BRINGBachelor’s degree or equivalent combination of education, experience and trainingBachelor’s degree in engineering preferred7+ years of relevant industry experienceDemonstrated ability to effectively work cross-functionally with Product Development, Engineering, QA.Specific experience operating automated test equipment including Instron machines. Electropulse a plus.Experience in validation and experimentation design to prove/disprove system or product functionality, reliability, and specification call-outs.Problem-solving and troubleshooting skills.Interpersonal and written communication skills.Experience with Python and grasshopper a plusResults orientation, team skills, ability to multi-task, ability to learn quickly, ability to respond to urgent needs of the team and deliver expected results within expected deadlines.Ability to serve as a technical resource for assessing validation requirements, solving test related problems, and drawing on resources across the organization to build effective test infrastructure.Proficiency in statistical analysis.Positive energy, curiosity, and a passion for building magical products that users love.Strong technical savvy and understanding/curiosity about emerging innovative technologies.Ability to work in a fast-paced environment where continuous learning is core to our identity.Willingness to roll up your sleeves to win as a team.WHAT YOU WILL WORK ONAs Test / DVE Lead, you will play a critical role in driving the execution of our powered athlete product roadmap. You will be responsible for ensuring that products shipped meet all applicable quality and performance criteria, validating functionality, reliability, and performance of products/prototypes using existing and invented quality metrics.IN THIS ROLE YOU WILL• Validate and test product performance and reliability from creation through production, with specific focus on digital footwear integration.• Participate in definition and execution of consumer product test and validation with specific focus on root-cause analysis of failure modes, and integration of detailed testing as a component in quality product development.• Manage of multiple external vendors/consultants (both domestic and international) in product development and test support, as well as direct interaction with Wear Test Coordinators in the footwear categories supporting management of long term and short-term wear testing.• Develop test procedures and metrics to assess product performance where no best-practice guidelines for testing or qualification exist; develop test and measurement systems as needed.• Drive test/validation methodology improvements, as well as process improvement and feedback to the engineering process. Participate in the early-stage engineering and product development process to provide footwear insight into the design process from the start.• Assist in specification and execution of quality, accuracy, and testing procedures across multiple partners and disciplines including traditional reliability testing, four corner testing, performance validation, and software quality assurance.• Utilize a wide range of appropriate statistical methodologies and techniques to demonstrate quality and efficacy. • Provide input on the equipment/process/software validation requirements and design control activities for new product development projects.We offer a number of accommodations to complete our interview process including screen readers, sign language interpreters, accessible and single location for in-person interviews, closed captioning, and other reasonable modifications as needed. If you discover, as you navigate our application process, that you need assistance or an accommodation due to a disability, please complete the Candidate Accommodation Request Form.

About the RoleAs Data Scientist II, you will work with a data science team and cross-functional partners to solve business challenges, promote data-driven decision-making with advanced data analysis and machine learning and develop products that strongly impact Kohl’s revenue and customers. As a senior member of the Data Science organization, you will be the technical expert for a team that builds models for initiatives such as recommender systems, NLP, image recognition, segmentation and user behaviors. You will take a mentorship role within the DS team and work collaboratively with other business areas.What You’ll DoLead exploratory data analysis to cull actionable insightsCollaborate with stakeholders to understand business requirements and translate them into technical solutionsDevelop and implement statistical and machine learning models Fine-tune, optimize and ensure the scalability of models and algorithmsAid in designing experiments to answer targeted questionsIdentify and drive continuous improvement of key business metrics in an assigned business functional areaDrive adoption and usage of data science products and modelsTranslate data science outputs into business outcomes and value deliveredMentor and guide junior data scientists, providing technical expertise and fostering a culture of continuous learning and developmentStay up to date on the latest trends and developments in data science and technology and identify implementation opportunities to support innovation at Kohl’sAdditional tasks may be assignedWhat Skills You HaveRequiredBachelor’s Degree in Data Science, Computer Science, Statistics, Applied Mathematics or equivalent quantitative field3+ years of progressively complex Data Science in the Recommendation Systems field, solving problems at scaleExtensive experience developing and deploying state-of-the-art algorithms using machine learning, statistical and optimization methods Experience with machine learning frameworks such as TensorFlow, PyTorch, GBQ, Spark MLlib, Keras or scikit-learnExperience in one or more areas of advanced data science (Recommender Systems, NLP, Deep Learning, Computer Vision, Generative AI, etc.)PreferredMaster’s degree and/or Ph.DRetail experienceMarketing models

Position:Sales Engineer - VMWareJob Description:Arrow is seeking a Sales Engineer - VMware - to provide technical direction and business guidance to our channel partner community in North America. As a Sales Engineer, you will be accountable for partner enablement goals by driving innovative technical programs and overseeing day-to-day technical account-level activities. You willbe responsible for evangelizing, positioning, and architecting solutions for channel partners within your assigned region or technology focus. The successful candidate will have deep knowledge in VMware solutions and knowledge across modern infrastructure and adjacent technologies.What You’ll Be Doing:Works in partnership with sales and marketing teams to develop and implement specific industry and account penetration strategies, produce account specific product and sales enablement plans, provide assessments and drive leads from identification to sale completion.Provides technical leadership and direction to channel partners and sales staff with pre-sales activities in the assigned market on behalf Arrow’s supplier VMwareLeads in the discovery, analysis, design, demonstration, and refinement of fully integrated technology solutionsDemonstrates technical leadership and subject matter expertise on VMware solutions including vSphere, cloud foundations, advanced security, containers, orchestration, private AI, and workload automation with an understanding of competitive offerings in the modern data centerActs as technical expert and consultant to develop and propose solutions that meet the technology and business requirements of assigned channel partners and their end usersMakes technical and sales presentations to channel partner’s technical and sales staffWorking with Arrow marketing teams to create and produce digital channel-ready technical content that is published to Arrow social media sites and networksServes as a trusted technology influencer to channel partners and serves as an internal Arrow resource on technical plays or specific business applications and outcomes within an assigned market segmentSuccessfully builds relationships with the Arrow account team, partners and end users in support of sales objectives; engages and leverages Arrow horizontal resources, abilities, budgets and personnel as appropriateLeads VMware technical sales calls with and on behalf of channel partnersQualifies VMware sales opportunities in the terms of end customer technical requirements, competition, decision making process and funding in partnership with Arrow channel partnersWhat We Are Looking For:Requires in-depth knowledge and experience with VMware solutions (VCF, SRM, Tanzu, etc.)Knowledge of configuration or sizing tools used by Broadcom is preferredAbility to prioritize and meet deadlinesResults drivenEntrepreneurial mind setHigh level of business and sales acumenStrong organizational and interpersonal abilitiesCustomer focusedIndustry certifications and/or experience with modern infrastructure/cloud/AI solutionsAbility to conduct effective group presentations and/or trainingsExperience / EducationTypically requires a minimum of 8 years of related experience with a 4 year degree; or 6 years and an advanced degree; or equivalent experience.Work ArrangementFully Remote: Must be able to travel to an Arrow office location as requested by Arrow leadership.What’s In It For YouAt Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That’s why we offer competitive financial compensation, including various compensation plans, and a solid benefits package.Medical, Dental, Vision Insurance401k, With Matching ContributionsPaid Time Off (including sick, holiday, vacation, etc.)Health Savings Account (HSA)/Health Reimbursement Account (HRA) OptionsGrowth OpportunitiesShort-Term/Long-Term Disability InsuranceTuition ReimbursementAnd more!#LI-EK1Annual Hiring Range/Hourly Rate:$105,300.00 - $170,000.00 OTELocation:US-CO-Colorado (Remote Employees)Remote work employees may be required to be present at the closest designated Arrow office for work-related purposes, at the Company’s request and sole discretion.Time Type:Full timeJob Category:SalesEEO Statement:Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status.(Arrow EEO/AAP policy)We anticipate this requisition will be open for a minimum of five days, though it may be open for a longer period of time. We encourage your prompt application.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Microgrid Automation Engineer III This position will be the technical lead and programmer for the integration of switchgear automation to G&W Electric's proprietary, grid-scale 2.4 MW microgrid, providing project management and customer support. As an Automation and Microgrid Engineer III you will: Assist with G&W switchgear automation solution proposals that include written functional description and pricing. Apply advanced product knowledge of relays, programming, and communication in switchgear distribution automation applications. Provide pre and post sales technical support to sales/marketing, production engineering, and customers for customized distribution automation solutions.Project Manage Distribution Automation projects from Quoting stage through Customer site acceptance without assistance from supervisor.Design logic, program relays and controllers, and test systems as required for projects.Develop flexible program templates and software solutions that can be combined with hardware for customizable product packages Manage technical relationship with key DA technology vendorsAssist Production Engineering with minor modifications as necessary for specific customer applications.Train and assist customers with installations and commissioning including on-site activities as necessary.Have the ability to function in cross-functional work teams.Make technical presentations to customers, clients, and/or professional peers.Provide technical assistance and training for peers and sales staff.Act as a mentor to new Automation Engineers to ensure they become proficient with LaZer solutions and successfully assimilate into the DA team.Have the ability to perform event analysis for all G&W automation solutions.Work with customers to write and present papers about the G&W automation solution provided to them.Maintain positive client interactions.Keep up to date with industry trends by attending conferences, and training courses. G&W MICROGRID-RELATED RESPONSIBILITIES: Act as in-house expert in all control systems in the Microgrid.Manage vendor relationships, especially with engineering groups.Manage periodic maintenance and testing of all software systems. Perform upgrades as necessary.Monitor microgrid system functionality. Troubleshoot and correct as needed.Support G&W's Microgrid Engineer in day-to-day operations as necessary.Supplement all periodic maintenance performed by Microgrid Engineer and act as a backup.Manage the microgrid operational schedule to maximize the return on investment of use cases while ensuring battery is prepared to support and handle highest priority scenarios.Maintain and be responsible for the G&W Customer Solution Center Microgrid control room.Support all microgrid use cases; especially advanced use cases including islanding, reconnection and DERMS integration We are looking for someone who: Holds a Bachelor's Degree in Electrical Engineering. Has 7+ years of progressive experience in Engineering design and/or development preferred. Preferred technical knowledge: Three Phase power systems including: Symmetrical componentsLoad flowOver current protection functionsRelay integration and logic programming for: SEL, ABB, Hitachi, Siemens and/or GE relaysCommunications including: StandardsFiber Optic Cable Selection and ApplicationRadio Communication and Antenna SelectionCellular Communication and Antenna SelectionTypical primary Voltage and Current test proceduresElectromagnetics and the application of motors, transformers, and generators on the power distribution systemMust have excellent interpersonal skills and ability to communicate with peers and internal and external customers. Has strong industrial / utility programming understanding and skills with a strong preference for relay programming. Has training and/or experience in relays and switchgear and electrical troubleshooting. Possesses knowledge of MS Windows, Word, Spreadsheet and project applications is required.Has the ability to travel overnight 30-40% and on weekends. What we offer you: Typical pay is $83,948 - 109,163 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision InsuranceShort and Long-Term DisabilityLife InsuranceHealth club membership program and reimbursementEmployee Assistance ProgramTuition Reimbursement401 (k) Annual Profit SharingVacationAir-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: https://www.youtube.com/watch v=DMtAhsdYeUQ G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday