Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. As a Senior System Development Engineer, you will be responsible for integration, simulation, and test of state-of-the-art space borne phased array systems. You will work internally and cross-functionally with a multi-disciplinary team to improve test speed and data collection, perform root cause analysis, and correlate test data with end-to-end system level simulations. Key job responsibilities• Measure, validate, and perform root cause analysis on phased array systems and sub-systems• Interface with standard RF equipment to enable automation and efficient data collection• Create and/or modify new software features to enable testing of standard phased array system metrics such as EIRP, EVM, and G/T• Act as a liaison with the Kuiper software team to drive new product requirements based on RF system test needs • Perform end-to-end modeling, simulation, and analysis of digital phased array systems Export Control Requirement:Due to applicable export control laws and regulations, candidates must be U.S. citizens, U.S. permanent residents (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS- BS in Electrical Engineering with relevant coursework in digital communication theory, digital signal processing, RF/Microwave Engineering, Antennas and Electromagnetic theory- 5+ years of non-internship professional software development experience- 3+ years of deploying and operating in a Linux/Unix environment experience- Experience with Standard RF Test Equipment such as VSA, VNA, and VSG- Experience with Hardware/Software system bring up and debuggingPREFERRED QUALIFICATIONS- MS in Electrical Engineering with 8+ years of professional experience or PhD with 5+ years of professional experience- Experience in RF system design, line-up analysis, digital modulation, radio architecture- Experience with simulation tools such as SystemVue, ADS or LabView- Excellent mathematical and problem-solving skills- Highly accurate and detail-orientedAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $136,100/year in our lowest geographic market up to $235,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Come work at Amazon!The Role:As Senior SERDES Design Engineer, you will engage with an experienced cross-disciplinary staff to conceive and design innovative product solutions. You will work closely with an internal inter-disciplinary team, and third-party suppliers to drive key aspects of product definition, execution and optimization. You must be responsive, flexible and able to succeed within an open collaborative peer environment.As a member of the Kuiper Silicon Development team, you will be responsible for the SERDES sub-system that is part of the digital-beamformer SOCs for the phased-array antennas, both for the Satellite products as well as the Customer Terminal ones.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylumKey job responsibilitiesIn this role you will:· Support the internal Kuiper teams in the integration and optimization of the various high-speed SERDES links in phased-array antenna systems· Simulate of 32Gbps SERDES IP for satellite communications· Integrate 112Gbps PAM-4 SERDES IP into complex SoCs in advanced CMOS nodesBASIC QUALIFICATIONS- Bachelor's degree in Electrical / Communications Engineering or related field- 7+ years experience in SERDES design- Experience with high-speed, low-power SERDES IP, especially the PHY layerPREFERRED QUALIFICATIONS- Master’s / PhD degree in Electrical / Communications Engineering or related field- 10+ years of hands on experience in high-speed (112Gbps), low power (- Proven track record of bringing SERDES IP to production- Familiarity with analyzing the impact of package and PCB on SERDES performance- Familiarity with UCIe, PAM4 and other high-speed SERDES IP families- Familiarity with FEC and DFE techniques- Familiarity with Interlaken or other SERDES networking protocols- Familiarity with SERDES ATE techniques (BIST, loopbacks, etc)- Familiarity with IP deliverables and PD (LEF, LIB, timing closure, EMIR, etc.)- Familiarity with SERDES AFE design- Good communicator, Strong written and verbal skillsAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $143,300/year in our lowest geographic market up to $247,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individualhouseholds to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.We're looking for a Manufacturing Engineer to join our Optical Inter-Satellite Link (OISL) production development team. As the Manufacturing Engineer for a Line Replaceable Unit at Project Kuiper, you will be directly responsible for the production process development, introduction, improvement, & maintenance of a key module on our next generation spacecraft, focusing on the assembly, integration, and test of electro-mechanical products. You’ll be a key technical voice on a team of manufacturing engineers working on the product, solving challenging technical problems associated with delivering an ultra-high-performing OISL modules to space. You will serve as a key lynchpin connection design/development, factory operations, quality engineering, program management, and more as you drive the manufacturing processes, we use from initial production introduction to full rate production. You will leverage your expertise in electro-mechanical systems manufacturing to partner with development teams on the design of future iterations of the OHA Assembly and our associated production test systems & tooling. You’ll solve complex industrial challenges associated with balancing production velocity, exceptional quality, and cost competitive production concepts while ensuring smooth technical execution of current production operations. You’ll be a key animating force in the increase in production capacity through vision & execution of capital investment for production scaling & automation.Key job responsibilities- Conceptualize, design, develop, and improve production processes (assembly, integration, test processes) through collaboration with a team of manufacturing engineers & other functions- Serve as primary technical interface to development team for an OISL Sub-assembly, participating as the lead technical voice from the factory in Design Reviews, key technical escalations, and new product development activities.- Support operations team directly by being a high solving power engineer, capable of bringing multiple diverging technical perspectives together in high pressure escalation moments such as quality containments.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the life- 40% of your time will be spent on the shop floor, working with production teams to implement new processes, review & solve key technical blockers in production, performing production development testing, etc.- 35% of time will be spent performing independent development work such as deep diving on available data sets to identify and implement key production improvement actions, acting on quality escapes by developing and implementing new quality control measures, developing & executing to existing roadmaps for capacity increase, process simplification, etc.- 25% of time will be spent in meeting settings, collaborating with others on topics such as new design introductions, production process change management, production solution finding reviews, etc.About the teamThe Optical Inter-Satellite Link Production team is a multi-disciplinary organization responsible for all aspects of production of the key modules enabling satellite-to-satellite communication. The Manufacturing Engineering Team is the technical arm of this organization, with 50+ engineers from all disciplines collaborating on all aspects of technical development & execution in production. BASIC QUALIFICATIONS- 4+ years of experience working in electrical engineering or equivalent experiencePREFERRED QUALIFICATIONS- Knowledge of SolidWorks simulation or Ansys Finite Element analysis tools- Experience designing small form factor devicesAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,600/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low latency, high-speed broadband connectivity to unserved and underserved communities around the world. Come work at Amazon!Key job responsibilitiesAs a Sr. Satellite Terminal Validation Engineer, you will be responsible for Customer Terminal (CT) integration and validation with hardware, software, and firmware. You will be working in a collaborative environment with a multi-disciplinary team. In this role, your responsibilities include:• Define CT systems architectures and specifications• Design tradeoffs of various CT architectures including RF and performance simulation to support tradeoff decisions• Develop integration & test Software & Firmware for lab verification measurements.• Develop, maintain, and support customer terminal validation hardware and software• Proactive engagement with internal and external development partners on Systems’ hardware and software architectures and implementation• Ensure delivered work meets technical, functional, performance, regulatory and business requirements• Perform in-field test and validation of various CT architectures• Traveling up to 20% of the time, depending on project phasesExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeAs a Sr. Satellite Terminal Validation Engineer on the Kuiper Customer Terminal Team, you will work daily with electrical hardware, RF, antenna, silicon, and product design engineers, as well as software and operations teams in a collaborative environment. Your focus will be on architecting, integrating, and verifying customer terminal functional performance to ensure it delights our customers.About the teamThe Kuiper Customer Terminal team is responsible for developing both outdoor & indoor devices, enabling customers internet service via the Kuiper satellite network. We own the entire process from early prototypes through mass production including requirements documents, architecture definition, hardware development, and all integration/verification testing.BASIC QUALIFICATIONS- 5+ years of programming with at least one modern language such as C++, C#, Java, Python, Matlab, Golang, PowerShell, Ruby experience- 5+ years of deploying and operating in a Linux/Unix environment experience- 5+ years of systems design, software development, operations, automation, and process improvement experience- Experience leading the design, build and deployment of complex and performant (reliable and scalable) software solutions in production- BS or equivalent in Computer Science, Electrical Engineering, Physics or related field- 5+ years in SW/HW development environment with at least 3 recent year in architectural/system role- 5+ years experience in development for complex telecommunication, high speed digital, antenna, and/or satellite communication systemsPREFERRED QUALIFICATIONS- Knowledge of engineering practices and patterns for the full software/hardware/networks development life cycle, including coding standards, code reviews, source control management, build processes, testing, certification, and livesite operations- Experience working with mobility satellite terminals such as maritime and aeronautical.- Experience developing in LabView and Matlab- Experience taking a leading role in building complex software or computing infrastructure that has been successfully delivered to customers- Master/PhD degree in Computer Science or Electrical Engineering- Familiar with satellite communication theory- Familiar with phased array designs and implementations- Satellite over-the-air Communication field-trial experience- Debugging skills for systems integration from RF front-end to basebandAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $136,100/year in our lowest geographic market up to $235,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Come work at Amazon! Innovation is part of our DNA! Our goal is to be Earth's most customer centric company, and we are just getting started. We need people who want to join an ambitious program that continues to push the state of the art in space based systems design.The Sr. RF Test Development Engineer will develop, test, and integrate complex electronic test systems and electronic hardware units which support spacecraft flight programs. This individual will act as a responsible engineer (RE) of the test set for a RF spacecraft unit or sub-system on the payload. The ideal candidate will be responsible for electronic hardware development including architecture design, detailed design, performing briefings/reviews, hardware test, production-site integration, and post-delivery support.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities- Architect, design/develop, and build complex RF test systems for space units and sub-systems for the payload- Lead the development and execution of test procedures and test plans- Collaborate with test-software developers, flight unit software developers, and electrical engineering PCBA designers on test planning activities- Lead, prepare, and conduct test readiness reviews with stakeholders and program leadershipA day in the lifeThe Sr. RF Test Development Engineer will be a member of the hardware validation team with responsibilities for developing hardware test fixtures and test automation for validation of various avionics and payload subsystems. This is a cross-functional role requiring constant interaction with multiple HW/SW design teams and end-users. You will define the architecture and roadmaps for design and implementation of test sets and electrical test equipment. You will be focused on driving automation and optimization of test processes.About the teamAvionics and Verification Test team is responsible for developing/designing, building, delivering, and supporting complex test sets for space avionics units, payload units, and subsystems.BASIC QUALIFICATIONS- Bachelor’s degree in electrical engineering, aerospace engineering, computer science or a related field.- 5+ years of experience designing complex test systems for the validation of complex hardware/PCBAs- 5+ years of experience integrating software and hardware systems- 5+ years experience developing and executing test plans for complex aerospace, automotive or consumer electronics systems.- 5+ years’ experience in the use of standard electronic lab test equipment (i.e., oscilloscopes, multimeters, etc.)- 3+ years of scripting or programming experience (Python, MATLAB, C, LabVIEW)PREFERRED QUALIFICATIONS- Experience in test plans and protocols related to established Space Hardware test processes (GEVS / SMC-S-016)- Knowledge of hardware and software tools for test automation (e.g. NI, Python, C/C++, Labview, etc.)- Experience with power supplies, IMUs, FPGAs, sensors, RF, and high-speed electrical signal characterization- Experience with PCB/CCA design, development, test, and integration- Experience with electronic unit design, development, test, and integration Experience with electronic Test System (Test Set) design, development, test, and post-delivery support Experience with developing and present design reviews for internal an* d external customers- Experience with developing final performance data packagesAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,600/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. They will be part of a multidisciplinary avionics design team and will work closely with PCBA design engineers, harness engineers, field-programmable gate array (FPGA) developers, embedded software developers, and system and integration engineers. They will work with design engineers to write design verification plans for power and signal integrity, as well as for standard and custom communication interfaces between integrated circuits and circuit boards. They will focus on design verification, taking designs from subsystem testing and initial build through functional testing and system performance validation.They will review designs from a Design For Test perspective They will develop methodologies to test, including development of fixtures if neededThey will create test script in collaboration with design and FW engineers They will be using software simulation tools, to model circuits and systems, to analyze performance, identify failure modes, and optimize designs. This will allow them to proactively address potential issues before they manifest in the physical hardware.They will ensure proper test execution, data collection and review, as well as demonstrate system requirement verification.They will troubleshoot and propose viable fixes when faced with electrical failures. Using their technical expertise and problem-solving skills, they develop practical, cost-effective solutions that address the root of the problem and prevent future occurrences.They will participate in reviews with cross-functional team and management about test readiness and DVT results.They will play an active role in taking the necessary steps throughout the verification process. They will work closely with cross-functional teams to coordinate testing activities and analyze results, ensuring the successful implementation of the proposed fixes.This is a fast-paced and intellectually challenging opportunity to work with thought leaders in multiple technology areas. They will have relentlessly high standards for themselves and for everyone they work with, and they will be constantly looking for ways to improve.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesWe are looking for an engineer who combines superb technical and analytical capabilities with a demonstrated ability to get the right things done quickly and effectively.You will own and manage comprehensive test procedures and execute system and board level test plans. You are expected to collect test data, perform data analysis, and document results.In this role, you will conduct test readiness reviews and align with various stakeholders on data review activitiesExpect to work with a team of top-notch engineers and influence overall test strategy by helping define system test requirementsYou should be comfortable with a high degree of autonomy and relish the idea of solving problems that haven't been solved at scale before.You are expected to maintain requirements traceability during testing and solve integration and test problems in real time.If this sounds like the role for you, come make history with us!A day in the lifeYou will tackle challenging, novel situations every day and have the opportunity to work with multiple technical teams at Amazon in different locations. In this role, you will be a member of the Hardware Test Verification and Validation Team with responsibilities for developing hardware tests and test automation for validation of various avionics systems. This is a cross-functional role requiring constant interaction with multiple HW/SW design teams and end-users.BASIC QUALIFICATIONS- Bachelor’s degree in Electrical Engineering, Computer Science or related field- Experience with EE and test fundamentals- 5+ years of experience in board level design verification for aerospace, automotive, or consumer electronics products; OR 5+ years of experience building test fixtures and complex test systems including integrating test software- 5+ years of experience developing requirements, plans, and procedures for product design verification.- 5+ years of experience in the use of standard electronic lab test equipment (i.e., oscilloscopes, multimeters, etc.)- 5+ years of experience with design or test of switching power supplies, electric motors, IMUs, sensors, and high-speed electrical signal characterization- 5+ years of experience in design verification of high-speed interfaces, signal integrity and protocol compliance- Experience with hardware and software tools for test automation (e.g. NI, dSPACE, Python, C/C++, Labview, etc.)- Experience in developing functional specifications, design verification plans and functional test proceduresPREFERRED QUALIFICATIONS- Experience working with interdisciplinary teams to execute product design from concept to production- Strong debugging/troubleshooting skills- Ability to coordinate between engineering, test lab, and technicians and schedule testing resources- Experience in test plans and protocols related to established Space Hardware test processes (GEVS / SMC-S-016)- Experience with power supplies, IMUs, FPGAs, sensors, RF, and high-speed electrical signal characterization- Experience with design or test of circuit boards with complex microcontrollers, system-on-chip (SOCs), or FPGAs- Experience with development of automated test systems- Experience with incoming calibration checks and developing calibration procedures- Experience in reviewing requirements to support various test phases- Experience as the technical lead, leading small groups of other test engineers across multiple designs- Excellent communication, leadership skills and sense of ownership and driveAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low latency, high-speed broadband connectivity to unserved and underserved communities around the world. Come work at Amazon!Key job responsibilitiesAs a Satellite Terminal Validation Engineer, you will be responsible for Customer Terminal (CT) integration and validation with hardware, software, and firmware. You will be working in a collaborative environment with a multi-disciplinary team. In this role, your responsibilities include:• Define CT systems architectures and specifications• Design tradeoffs of various CT architectures including RF and performance simulation to support tradeoff decisions• Develop integration & test Software & Firmware for lab verification measurements.• Develop, maintain, and support customer terminal validation hardware and software• Proactive engagement with internal and external development partners on Systems’ hardware and software architectures and implementation• Ensure delivered work meets technical, functional, performance, regulatory and business requirements• Perform in-field test and validation of various CT architectures• Traveling up to 20% of the time, depending on project phasesExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeAs a Satellite Terminal Validation Engineer on the Kuiper Customer Terminal Team, you will work daily with electrical hardware, RF, antenna, silicon, and product design engineers, as well as software and operations teams in a collaborative environment. Your focus will be on architecting, integrating, and verifying customer terminal functional performance to ensure it delights our customers.About the teamThe Kuiper Customer Terminal team is responsible for developing both outdoor & indoor devices, enabling customers internet service via the Kuiper satellite network. We own the entire process from early prototypes through mass production including requirements documents, architecture definition, hardware development, and all integration/verification testing.BASIC QUALIFICATIONS- 3+ years of programming with at least one modern language such as C++, C#, Java, Python, Matlab, Golang, PowerShell, Ruby experience- 3+ years of deploying and operating in a Linux/Unix environment experience- 3+ years of systems design, software development, operations, automation, and process improvement experience- Experience leading the design, build and deployment of complex and performant (reliable and scalable) software solutions in production- BS or equivalent in Computer Science, Electrical Engineering, Physics or related field- 3+ years in SW/HW development environment with at least 3 recent year in architectural/system role- 3+ years experience in development for complex telecommunication, high speed digital, antenna, and/or satellite communication systemsPREFERRED QUALIFICATIONS- Knowledge of engineering practices and patterns for the full software/hardware/networks development life cycle, including coding standards, code reviews, source control management, build processes, testing, certification, and livesite operations- Experience working with mobility satellite terminals such as maritime and aeronautical.- Experience developing in LabView and Matlab- Experience taking a leading role in building complex software or computing infrastructure that has been successfully delivered to customers- Master/PhD degree in Computer Science or Electrical Engineering- Familiar with satellite communication theory- Familiar with phased array designs and implementations- Satellite over-the-air Communication field-trial experience- Debugging skills for systems integration from RF front-end to basebandAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $116,300/year in our lowest geographic market up to $201,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.As an RF Engineer you will engage with an experienced cross-disciplinary team to develop new, advanced test systems for our Digital Phased Array systems, integrating them with our existing test infrastructure. We have near field spherical scanners, robotic manipulators and advanced RF optics that account for some of the fastest antenna characterization systems in the world, but we need to keep expanding our test coverage and improve accuracy and tighten repeatability. These systems employ RF and mixed signal electronics that allow us to test antennas from 400 MHz to 40 GHz. We need to also expand coverage to V band as well as multiply the test speed and capacity.Key job responsibilitiesYour will leverage your experience in RF electronics to design new acquisition systems, and troubleshoot existing ones looking at the acquired results in both near field and far field, and thus isolate issues relative to RF circuit, test equipment, setup, array calibration and software/RF system. You will exercise pragmatism and write automation code (Python, SCPI, C/C++, Rust) to devise test setups and procedures that are simple, easy to develop and maintain, yet able to perform all requirement verification tasks. You’ll use documentation and communication skills to report test metrics and requirement pass/fail to Antenna designer, Array designers, Software team, and other teams.Key job responsibilitiesDevelop our test infrastructure to measure antenna performance metrics of digital phased array systems and customer terminals in near and far field chambers, and automate the tests.Define test plans and procedures for lab and chamber testing, ensuring the required test coverage to verify requirements and validate modelsDevelop automation routines to control equipment (ATE) and our custom-made antenna test system to accelerate antenna beam pattern test.Implement, validate, and optimize lab and chamber test configurations.Develop required post-processing to analyze test results.Document and interpret test results, troubleshoot issues, performing root-cause analysis for any test failures.Communicate status and issues effectively with developers and managers.Meet with suppliers to select enabling lab technologies.Shepherd antennas and customer terminals through test campaigns throughout the development lifecycle, from concept to implementation to integration.About the teamThe Kuiper Antenna Test Infrastructure team provides the test systems and techniques to verify Payload, CT and full satellite vehicle hardware, integrates the test automation and connects the dots between Responsible Engineers and their product's test metrics. The team is a pivotal point for a multitude of other teams and orgs, our internal customers. An it's highly multidisciplinary: SysDE, SDE, ME, Metrology, Antenna, FPGA and Lab Ops all converge in the same room.BASIC QUALIFICATIONS- Master's degree in electrical engineering, computer engineering, or equivalent- Experience in developing functional specifications, design verification plans and functional test procedures- 5+ years of professional, non-internship experience EM modeling in 2.5D and 3D EM tools- 5+ years of experience in RF design and modeling with linear and non-linear simulation tools- 5+ years of experience with MATLAB- Professional, non-internship experience with design, implementation and verification with launched RF products.- Experience with lab work and RF test equipment- Experience with Automation of Test EquipmentPREFERRED QUALIFICATIONS- Experience working with interdisciplinary teams to execute product design from concept to production- Experience with the project management of technical projects- Experience in the design of complex mechanical products and equipment at volume- Preferred qualifications- MSc or PhD in EE with RF- or antenna-related thesis research- Strong foundations in RF Electronics- Strong foundations in Digital communication systems- Strong foundations in antennas- Excellent mathematical skills- 5+ years of professional, non-internship experience designing RF products and building blocks such as filters, hybrids, combiners, active RF circuits and front-end design- 2+ years of experience programming Automated Test Equipment- Experience with testing of digitally modulated signalsAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.A Senior Architect strives to constantly raise the bar on the customer experience. Product Design Engineers engage with an experienced cross-disciplinary team to conceive, design and bring to market innovative consumer products for the Kuiper program. Key responsibilities include mechanical part and assembly design, testing, evaluating, and down selection. These positions identify key design attributes, and work quickly and efficiently to converge on an electromechanical design for the system. They highlight concerning issues to leadership and provide recommendations on how to revolve them. The output of their work is the physical product. They know intimately the rationale and tradeoffs behind each and every detail of the design from material selection, a reinforcing rib, a molding gate, etc. They work with manufacturing partners early to scale their designs for high volume manufacturing while optimizing for cost, performance and challenging schedules. They have the ability to communicate effectively and efficiently with engineering (PD, HW, and Antenna) and industrial design team members, cross functional teams, and executives. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities• Lead Architect for an outdoor consumer electronics product.• Work with cross functional team in assessing project/risk readiness for PD owned deliverables.• Concise and accurate communication with PD members, cross functional teams, and executives.• Independently able to change priorities based on high value judgements.• Customer focused when solving ambiguous problems.• Negotiate and collaborate with external teams to manage priorities and allocate PD resources effectively.• Ability to create scalable solutions while solving tactical problems.• Up to a total of 25% international and domestic travel may be required.BASIC QUALIFICATIONS- Bachelor of Science in Mechanical Engineering or other closely related fields of study.- 7+ years of experience in consumer electronics products with the last several years as architect or technical lead designing IP66 outdoor rated electronics/telecommunications products.- 5+ years of experience with 3D CAD modeling, tooling reviews and drawing release for production tooling.- 5+ years of experience with designing for high volume manufacturing and assembly processes (should include multiple tools in several of: plastic injection / thermoforming, casting, sheet metal, machining, various finishing processes)- 5+ years of experience designing Printed Circuit Boards (PCBs), flexes and electrical interconnectsPREFERRED QUALIFICATIONS- MS or PhD in Mechanical Engineering or other closely related engineering field of study.- 15 + years of experience in consumer electronics products with the last 5 years as architect or technical lead designing IP66 outdoor rated electronics/telecommunications products.- Subject Matter Expert in several mechanical engineering disciplines.- 5+ years of experience with Phase Array antennas including products used in the field.- Excellent written and verbal communication skills at both the engineering and executive level.Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. As a Senior Hardware Engineer, you will be a part of the team of experts working on the development of advanced antenna systems. You will own or contribute to the following: · Design and optimization of different blocks of antennas system · Design the proof of concept systems and prototypes for the next generation of the antennas · Design of RF circuitry in collaboration with RF team · Design of automated test systems, test fixtures and factory test · Bring-up and test campaigns of the active antennas · Lead and review PCB layout Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. BASIC QUALIFICATIONS- BS degree in electrical engineering or computer engineering, or equivalent experience- 7+ years of industrial experience especially board level analog/digital design- 3+ years of experience in high-speed digital design, multi-gigabit SERDES, signal and power integrity- 3+ years of experience in using schematic- 2+ years of experience using lab equipment, including oscilloscopes, logic analyzers, and multi-meters- Experience with Mentor Graphics or Cadence layout toolsPREFERRED QUALIFICATIONS- Masters of Science or PhD in electrical engineering or computer engineering- Familiarity with analog electronic fundamentals (transistor circuits, op-amps, filters, etc)- Experience in design, implementation, bring up and debugging of proof of concept HW and prototypes- Familiarity with power supply design- Proficiency in developing programs for instrument control- Previous work experience in a programming languageAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.As a Senior System Development Engineer, you will architect the HW/SW infrastructure for test automation for Satellite Payload Antennas and Customer Terminals. These products are complex systems that incorporate a Linux Embedded OS, with which you will interface. You will be responsible for conducting thorough code reviews of both your own and others' merge requests while developing a comprehensive test framework. This framework will enable the creation, tracking, updating, and execution of repeatable, discoverable tests, while collecting critical measurements and streamlining test verification processes.Your role will also involve designing Radio Frequency (RF) and Over The Air (OTA) test systems for antenna products, focusing on expanding test coverage, integrating complex testing scenarios, and improving test accuracies. Working hand in hand with Responsible Engineers (RE) who oversee antenna products and collaborating with our multidisciplinary antenna testing team, you will capture these efforts in detailed test procedures.A key aspect of your position will be serving as a liaison between Software Teams, external resources (including test equipment vendors), and REs. In this capacity, you will establish and implement Aerospace validation and verification processes, incorporating automated testing into various procedures including Design Verification (DVT), Acceptance Testing (ATP), Qualification Testing (QTP), and Payload integration testing.Key job responsibilities- Design new antenna test systems using RF equipment (VSA, VSG, GNSS simulators, digitizers, switches), RF up/down-converters, FPGA-based Digitizers, and controllers of motorized and electrically switched axes.- Inspect the control hardware currently installed, and use that information to architect and design an acquisition system with TTL and TCP/IP controls- Determine automation requirements across the internal and external teams- Develop test frameworks for loading software builds and configuration, managing test cases, storing test configurations, executing test runs, logging metrics, and pipe the data.- Develop automation services to optimize measurements, data management and analysis for antenna and customer terminal verification- Train internal and external teams on test automationAbout the teamThe Kuiper Antenna Test Infrastructure team provides the test systems and techniques to verify Payload, CT and full satellite vehicle hardware, integrates the test automation and connects the dots between Responsible Engineers and their product's test metrics. The team is a pivotal point for a multitude of other teams and orgs, our internal customers. And it's highly multidisciplinary: SysDE, SDE, ME, Metrology, Antenna, FPGA and Lab Ops all converge in the same room.BASIC QUALIFICATIONS- Bachelor's degree- 5+ years of non-internship professional software development experience- 3+ years of deploying and operating in a Linux/Unix environment experience- Experience leading the design, automation, deployment, and support of large-scale infrastructure- Experience programming with at least one modern language such as Python, Ruby, Golang, Java, C++, C#, Rust- Strong sense of ownership and drive- 3+ years of designing or architecting (design patterns, reliability and scaling) of new and existing systems experience- Experience with version control systems and code repositories- Experience in development of hardware automation and test systems- Experience with Hardware/Software system bring up and debuggingPREFERRED QUALIFICATIONS- Experience in mentoring, leading, or managing more junior engineers- Experience writing technical documents, project plans and progress reports to leadership and to stakeholders- Experience with RF testing and equipment, like Spectrum Analyzers, VSA, VSG, GNSS simulators- Experience in Signal Processing- Experience building services using AWS products- Excellent mathematical and problem-solving skills- Highly accurate and detail-orientedAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $136,100/year in our lowest geographic market up to $235,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Our goal is to be Earth's most customer centric company, and we are just getting started. We need people who want to join an ambitious program that continues to push the state of the art in space-based systems design.Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesWe are looking for an excellent engineer who combines superb technical and analytical capabilities with a demonstrated ability to get the right things done quickly and effectively:• Develop/specify launch vehicle integration solutions for various launch providers.• Design of electrical ground support equipment for Kuiper satellites.• Develop qualification plans to validate launch vehicle and ground system integration hardware and software.• Support occasional (10-15%) travel to launch sites and external vendors.• Coordinate with internal customers to support production and launch campaigns.• Lead and participate in system design and qualification reviews.• Provide inputs and/or review to procedures for integration and test. • Be a technical role model; instilling best practices across the full development lifecycle.A day in the lifeAs a Senior Systems Integration Engineer, you will be a member of the launch vehicle electrical integration team, focusing on the design and deployment of launch and ground support systems. You will be expected to lead a variety of tasks such as specifying and developing launch vehicle interfaces, qualifying end-to-end launch vehicle integration and dispense systems, and developing electrical ground support hardware/racks. You will oversee external vendor and launch partner integration testing, providing technical review and feedback. Additionally, you will provide procedure review and input for our internal and external partners for vehicle integration and testing. As a senior member of the team, you will serve as a technical role model and ensure high-quality and innovative solutions are pursued. You will work with a team of top-notch engineers and collaborate with multiple other spacecraft design and integration teams. You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved at scale before. Along the way, we guarantee that you will learn a lot, have fun and make a positive impact on tens of millions of people!About the teamOur team is responsible for delivering launch vehicle integration and ground support equipment supporting Project Kuiper’s LEO satellite constellation. We take ownership and work hard to deliver the highest quality solutions to support the long-term success of Project Kuiper. This team consists of a broad set of technical backgrounds, and we look forward to welcoming people that are excited to help us deliver broadband internet to underserved communities!BASIC QUALIFICATIONS• BS degree in electrical engineering, or equivalent.• 7+ years in hardware development and/or hardware testing.• Experience in specification and development of electrical systems support hardware.• Proficiency designing and interpreting electrical schematics.• Experience in electrical power delivery and supporting harnessing.• Experience with network communication protocols.PREFERRED QUALIFICATIONS• Experience in payload launch vehicle integration.• Experience in satellite/spacecraft assembly, processing, and integration.• Experience in development and/or deployment of electrical ground support equipment.• Experience with development of hardware in loop testing for automotive and/or aerospace systems.• Experience writing scripts in at least one language (Bash, Python, Ruby, etc.).• Experience in a development or testing role across full product life cycle (concept to production at scale) in Consumer or Industrial Electronics (including Power Electronics, Robotics, Aerospace, Automotive, and/or Communications fields).Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $136,100/year in our lowest geographic market up to $235,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individualhouseholds to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.Export Control : This position requires that the candidate selected be a U.S. Citizen in order to comply with U.S. government-imposed requirements related to the nature of the work and/or where it will be performed.Kuiper IT & Digital Operation team is looking to hire a Software Development engineer. This is a fast-paced, intellectually challenging position, and will work with leaders in multiple technology areas. Have relentlessly high standards for yourself and everyone you work with, and be constantly looking for ways to improve your product’s performance, quality and cost. We want individuals who are ready for this challenge and want to reach beyond what is possible today.Key job responsibilitiesWork with Export and Kuiper Security to deliver IAM requirements- Build and deliver user, device, and service Identities for Kuiper's business operations- Build RBAC and ABAC services- Develop secure services utilizing x509 Certificates for Digital Signatures and Encryption- Develop cloud native software systems in Go- Utilize AWS and other Amazon technologies to build highly-available software services.- Design and develop performant systems that meet the mission criteria and requirements.- Help on-board and mentor new team members.About the teamHere at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. Amazon has ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences. Amazon’s culture of inclusion is reinforced within our 16 Leadership Principles, which remind team members to seek diverse perspectives, learn and be curious, and earn trust.At Amazon, our mission is to be the most customer-centric company on Earth. To get there, we need exceptionally talented, bright and driven people. We're dedicated to supporting new team members. Our team has a broad mix of experience levels and Amazon tenures, and we’re building an environment that celebrates knowledge sharing and mentorship.BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 3+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience with full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operationsPREFERRED QUALIFICATIONS- 3+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experience- Bachelor's degree in computer science or equivalentAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $129,300/year in our lowest geographic market up to $223,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individualhouseholds to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.As a Sr. System Development Engineer, you will build tools and processes for monitoring, operating, and scaling ground infrastructure to millions of users around the globe. Use and enhance the tools you and the team develop. Using metrics, scalability in design, and continuous improvement, you will automate repetitive processes to eliminate outages and enable high availability of the ground infrastructure. Key job responsibilities - Continuously strive for operational excellence by seeking to automate away manual processes - Ensure that all systems are designed to be robust, scalable, maintainable and adaptable as the service scales and evolves over time - Build and maintain critical infrastructure, tools and operating procedures to report on the health of ground infrastructure.- Integrate with other existing systems such as trouble ticketing, dashboards, and metrics tools and services- Measure and improve the performance and availability of the Kuiper Ground Infrastructure - Provide critical operations support and incident response for the service, while taking part in an on-call rotationA day in the lifeMentoring, Design, Coding, Operational Excellence: Work with business partners, leadership and other engineers, influence and lead the design of systems. We need your ideas and your ability to take initiative, innovate, and produce results as we continuously improve the customer experience. Day to day work will vary between automation or other scripting work, operational excellence initiatives, design meetings, coordination with engineering teams and external partners, and an on-call rotation.About the teamThe team is comprised of a leader and System Development Engineers in North America, Europe and Australia. The overall mission is to ensure Kuiper Ground Infrastructure is always available to serve customers.BASIC QUALIFICATIONS- 4+ years of deploying and operating in a Linux/Unix environment experience- Knowledge of at least one modern programming language such as C, C++, Java, or Perl- Practical experience in networking, storage systems, operating systems and hands-on systems engineering experience- Designing or architecting (design patterns, reliability and scaling) of new and existing systemsPREFERRED QUALIFICATIONS- Experience writing technical documents, project plans and progress reports to leadership and to stakeholders- Curious to learn in depth about both technology and our customers- A curious self-starter with a proven track record of diving into unknown territory, learning new concepts, and pushing your comfort zone.- An effective multi-tasker who navigates a fast-paced, deadline-driven environment with grace and efficiency.Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $136,100/year in our lowest geographic market up to $235,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.As an Opto-Electrical Liaison Engineer on the OISL team, you will support the production and integration of high-speed optical and electronic communication hardware. This role spans optical transceivers, laser drivers, detectors, and supporting electronicsensuring hardware is debugged, validated, and delivered with high quality and performance.Key job responsibilities* Applies knowledge of OISL design principles to assess and resolve opto-electrical product/process issues through the product lifecycle.* Analyzes, conducts root cause analysis, and develops dispositions for design and build non-conformances.* Applies engineering principles to investigate technical, electrical, and quality issues that cannot be resolved by production teams and implements solutions.* Identifies and documents reported issues, and communicates deviations that may impact functionality, performance, or test coverage; manages resolution and closure.* Reviews and dispositions non-conformances related to PCBs, laser modules, detector circuits, and harnessing through all phases: procurement, manufacturing, test, and integration.* Develops standard rework procedures, test coverage improvements, and board-level DFM feedback.* Works closely with quality, firmware, hardware, and systems engineering teams to ensure functional performance is met.* Collaborates with CM/OEM vendors and internal suppliers for resolution of electrical integration issues.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeEach day begins by reviewing test data, addressing non-conformances, and aligning with quality, integration, and design teams. You’ll investigate root causeswhether optical, electrical, or mechanicalthen propose and implement solutions to keep hardware on track. Hands-on work may include troubleshooting hardware, authoring rework instructions, or validating process improvements on the floor. You balance speed and rigor, ensuring fixes are well-documented and maintain design intent. Your efforts directly support the delivery of reliable, space-ready optical inter-satellite link systems.About the teamThe OISL team develops and delivers space-based optical inter-satellite link systems, enabling high-speed laser communication across the Kuiper constellation. The team focuses on precision hardware, alignment, and system reliability to meet the demanding requirements of space borne optical networks.BASIC QUALIFICATIONS- BS in Electrical Engineering, Photonics, or related field.- 5+ years of experience with electro-optical hardware development, including analog/mixed-signal design.- Experience with working knowledge of laser drivers, TIAs, photodiodes, and high-speed PCB layout practices.- Experience using lab instrumentation such as oscilloscopes, BER testers, optical power meters, and spectrum analyzers.- Experience with EMI mitigation, ESD safety, and grounding/shielding strategies.PREFERRED QUALIFICATIONS- Experience in telecom, datacom, or aerospace optical communication systems.- Familiarity with embedded firmware and digital diagnostics in opto-electronic systems.- Experience supporting design-for-test (DFT), DFM, and qualification in high-reliability environments.Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,600/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.