Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.A Senior Architect strives to constantly raise the bar on the customer experience. Product Design Engineers engage with an experienced cross-disciplinary team to conceive, design and bring to market innovative consumer products for the Kuiper program. Key responsibilities include mechanical part and assembly design, testing, evaluating, and down selection. These positions identify key design attributes, and work quickly and efficiently to converge on an electromechanical design for the system. They highlight concerning issues to leadership and provide recommendations on how to revolve them. The output of their work is the physical product. They know intimately the rationale and tradeoffs behind each and every detail of the design from material selection, a reinforcing rib, a molding gate, etc. They work with manufacturing partners early to scale their designs for high volume manufacturing while optimizing for cost, performance and challenging schedules. They have the ability to communicate effectively and efficiently with engineering (PD, HW, and Antenna) and industrial design team members, cross functional teams, and executives. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities• Lead Architect for an outdoor consumer electronics product.• Work with cross functional team in assessing project/risk readiness for PD owned deliverables.• Concise and accurate communication with PD members, cross functional teams, and executives.• Independently able to change priorities based on high value judgements.• Customer focused when solving ambiguous problems.• Negotiate and collaborate with external teams to manage priorities and allocate PD resources effectively.• Ability to create scalable solutions while solving tactical problems.• Up to a total of 25% international and domestic travel may be required.BASIC QUALIFICATIONS- Bachelor of Science in Mechanical Engineering or other closely related fields of study.- 7+ years of experience in consumer electronics products with the last several years as architect or technical lead designing IP66 outdoor rated electronics/telecommunications products.- 5+ years of experience with 3D CAD modeling, tooling reviews and drawing release for production tooling.- 5+ years of experience with designing for high volume manufacturing and assembly processes (should include multiple tools in several of: plastic injection / thermoforming, casting, sheet metal, machining, various finishing processes)- 5+ years of experience designing Printed Circuit Boards (PCBs), flexes and electrical interconnectsPREFERRED QUALIFICATIONS- MS or PhD in Mechanical Engineering or other closely related engineering field of study.- 15 + years of experience in consumer electronics products with the last 5 years as architect or technical lead designing IP66 outdoor rated electronics/telecommunications products.- Subject Matter Expert in several mechanical engineering disciplines.- 5+ years of experience with Phase Array antennas including products used in the field.- Excellent written and verbal communication skills at both the engineering and executive level.Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

An Integration and Automation Engineer in Project Kuiper - MAC Software Development team is responsible for (1) Integration of the the MAC sub-system with the control-plane, data-plane and radio subsystems of the satellite payload and ground systems, and (2) Test Automation for driving the MAC-SW running on Kuiper payload HW and the RF instrumentation and test set ups (VSA, VNA, VSGs, Satellite Channel Emulators, anechoic chamber control etc.). The engineer will develop integration and test plans working closely with systems engineering, software engineering and hardware engineering and RF integration teams, and develop software in Python/C/C++/LabView for triggering system use cases, executing tests, collecting results and generating reports.Ideal candidate will have integration and test automation experience one or more areas of cellular wireless communication, optical fiber communications, satellite communications switching and routing, industrial control systems, aerospace or instrumentation engineering. Strong scripting skills required in Python and experience with exposure to LabView or similar. Experience of using RF test equipment is desirable. Experience with developing SW C/C++ will be desirable. Export Control RequirementDue to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities- Software development in Python/LabView/C/C++/Rust- Integration and test plans development closely working with systems engineering, software engineering and hardware engineering and RF integration teams- Develop integration and test automation for driving the MAC-SW running on Kuiper payload HW and the RF instrumentation and test set ups (VSA, VNA, VSGs, Satellite Channel Emulators, anechoic chamber control etc.), for triggering system use cases, executing tests, collecting results and generating reports.BASIC QUALIFICATIONS- 4+ years of non-internship professional software development testing experience- 2+ years of test automation frameworks and tools building experience- Experience programming with at least one modern language such as Java, C++, or C# including object-oriented designPREFERRED QUALIFICATIONS- Knowledge of overall system architecture, scalability, reliability, and performance in a database environment- 4+ years of test automation frameworks and tools building experience- Experience debugging, diagnosing, and troubleshooting complex, production software issuesAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Los Angeles County applicants: Job duties for this position include: work safely and cooperatively with other employees, supervisors, and staff; adhere to standards of excellence despite stressful conditions; communicate effectively and respectfully with employees, supervisors, and staff to ensure exceptional customer service; and follow all federal, state, and local laws and Company policies. Criminal history may have a direct, adverse, and negative relationship with some of the material job duties of this position. These include the duties and responsibilities listed above, as well as the abilities to adhere to company policies, exercise sound judgment, effectively manage stress and work safely and respectfully with others, exhibit trustworthiness and professionalism, and safeguard business operations and the Company’s reputation. Pursuant to the Los Angeles County Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $129,300/year in our lowest geographic market up to $223,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. As a Senior Hardware Engineer, you will be a part of the team of experts working on the development of advanced antenna systems. You will own or contribute to the following: · Design and optimization of different blocks of antennas system · Design the proof of concept systems and prototypes for the next generation of the antennas · Design of RF circuitry in collaboration with RF team · Design of automated test systems, test fixtures and factory test · Bring-up and test campaigns of the active antennas · Lead and review PCB layout Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. BASIC QUALIFICATIONS- BS degree in electrical engineering or computer engineering, or equivalent experience- 7+ years of industrial experience especially board level analog/digital design- 3+ years of experience in high-speed digital design, multi-gigabit SERDES, signal and power integrity- 3+ years of experience in using schematic- 2+ years of experience using lab equipment, including oscilloscopes, logic analyzers, and multi-meters- Experience with Mentor Graphics or Cadence layout toolsPREFERRED QUALIFICATIONS- Masters of Science or PhD in electrical engineering or computer engineering- Familiarity with analog electronic fundamentals (transistor circuits, op-amps, filters, etc)- Experience in design, implementation, bring up and debugging of proof of concept HW and prototypes- Familiarity with power supply design- Proficiency in developing programs for instrument control- Previous work experience in a programming languageAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.As a Senior System Development Engineer, you will architect the HW/SW infrastructure for test automation for Satellite Payload Antennas and Customer Terminals. These products are complex systems that incorporate a Linux Embedded OS, with which you will interface. You will be responsible for conducting thorough code reviews of both your own and others' merge requests while developing a comprehensive test framework. This framework will enable the creation, tracking, updating, and execution of repeatable, discoverable tests, while collecting critical measurements and streamlining test verification processes.Your role will also involve designing Radio Frequency (RF) and Over The Air (OTA) test systems for antenna products, focusing on expanding test coverage, integrating complex testing scenarios, and improving test accuracies. Working hand in hand with Responsible Engineers (RE) who oversee antenna products and collaborating with our multidisciplinary antenna testing team, you will capture these efforts in detailed test procedures.A key aspect of your position will be serving as a liaison between Software Teams, external resources (including test equipment vendors), and REs. In this capacity, you will establish and implement Aerospace validation and verification processes, incorporating automated testing into various procedures including Design Verification (DVT), Acceptance Testing (ATP), Qualification Testing (QTP), and Payload integration testing.Key job responsibilities- Design new antenna test systems using RF equipment (VSA, VSG, GNSS simulators, digitizers, switches), RF up/down-converters, FPGA-based Digitizers, and controllers of motorized and electrically switched axes.- Inspect the control hardware currently installed, and use that information to architect and design an acquisition system with TTL and TCP/IP controls- Determine automation requirements across the internal and external teams- Develop test frameworks for loading software builds and configuration, managing test cases, storing test configurations, executing test runs, logging metrics, and pipe the data.- Develop automation services to optimize measurements, data management and analysis for antenna and customer terminal verification- Train internal and external teams on test automationAbout the teamThe Kuiper Antenna Test Infrastructure team provides the test systems and techniques to verify Payload, CT and full satellite vehicle hardware, integrates the test automation and connects the dots between Responsible Engineers and their product's test metrics. The team is a pivotal point for a multitude of other teams and orgs, our internal customers. And it's highly multidisciplinary: SysDE, SDE, ME, Metrology, Antenna, FPGA and Lab Ops all converge in the same room.BASIC QUALIFICATIONS- Bachelor's degree- 5+ years of non-internship professional software development experience- 3+ years of deploying and operating in a Linux/Unix environment experience- Experience leading the design, automation, deployment, and support of large-scale infrastructure- Experience programming with at least one modern language such as Python, Ruby, Golang, Java, C++, C#, Rust- Strong sense of ownership and drive- 3+ years of designing or architecting (design patterns, reliability and scaling) of new and existing systems experience- Experience with version control systems and code repositories- Experience in development of hardware automation and test systems- Experience with Hardware/Software system bring up and debuggingPREFERRED QUALIFICATIONS- Experience in mentoring, leading, or managing more junior engineers- Experience writing technical documents, project plans and progress reports to leadership and to stakeholders- Experience with RF testing and equipment, like Spectrum Analyzers, VSA, VSG, GNSS simulators- Experience in Signal Processing- Experience building services using AWS products- Excellent mathematical and problem-solving skills- Highly accurate and detail-orientedAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $136,100/year in our lowest geographic market up to $235,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesAs a senior systems development engineer, you will work with a wide variety of functional groups and will be involved in the design and implementation of software systems for phased array antennas validation and test, as well as overall system integration: - Develop tools for characterizing antenna RF and system performance. - Develop software and test rack automation to support production test stations. - Support electrical and software bring-up, debug of new hardware. - Work closely with cross-functional teams to design and implement optimized validation and verification software. - Plan, develop and implement environmental test activities for phased array antennas. - Implement DSP FPGA firmware to map high-level algorithms from Matlab or C to architecture-specific code.BASIC QUALIFICATIONS- BS or MS in electrical engineering, computer engineering or computer science, or equivalent experience- 5+ years of experience with C/C++ and Python or other scripting languages. Experience automating, building, and testing systems- Experience with HW/SW bring up and debugging- Experience working in a hardware lab with oscilloscopes, signal generators, power supplies, and other test equipmentPREFERRED QUALIFICATIONS- Solid fundamental CS / EE skill set with hands-on industry or university experience in embedded software development- Knowledge of FPGA systems, GPIO/I2C/SPI and peripheral interfacing.- Experience with RTL and FPGA development tools- Experience with Matlab or tools alike- Knowledge of Database systemsAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $136,100/year in our lowest geographic market up to $235,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.We are looking for an experienced Senior Satellite Test Engineer to help architect innovative test infrastructure and take satellites from initial build, through functional testing, spacecraft validation, and chart the path to reliably integrating and launching thousands of satellites. This is a fast-paced, intellectually challenging opportunity to work with thought leaders in multiple technology areas. You’ll have relentlessly high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve. We want individuals who want to reach beyond what is possible today. Everyone on the team needs to be entrepreneurial, wear many hats and work in a highly collaborative environment. Our team is responsible for development and implementation of test hardware and test campaigns for integrated vehicle testing.As a Project Kuiper Satellite Test Engineer you will work with multiple engineering and manufacturing teams across ground and space systems to specify test equipment requirements, develop test plans and complex test scripts and execute test campaigns to support development and production test initiatives. Your focus will be in optimization of test processes to enable Project Kuiper production plans. Key job responsibilities- This position will work 2nd shift (4 PM - 2 AM) either Sunday-Wednesday or Wednesday through Sunday.- Develop, augment, and support testing of components, from subsystems to the full spacecraft to determine suitability for flight.- Lead the definition and implementation of organization wide test strategies to mitigate product risks to stakeholders.- Work with avionics, payload and software teams to gather requirements, design test plans, determine applicable test cases, and prepare for test execution.- Own vehicle level test campaigns and collaborate with responsible engineers, manufacturing engineers, software developers, tooling teams and ground support teams to deliver a thoroughly tested spacecraft ready for launch.- Communicate fluidly across a variety of teams to identify product risks and how they will be addressed to ensure mission success.- Develop complex test automation sequences using scripting languages such as Python.- Develop innovative hardware and processes to optimize and improve testing capabilities.About the teamThe Integrated Vehicle Test team is responsible for development and execution of test plans to ensure reliable operation of satellite vehicles in space. The team’s responsibilities include process development, test hardware and software development and test execution for qualification vehicles and improving and scaling processes for production cadence. The tasks and daily focus change rapidly, and you will often take on exciting new responsibilities to ensure project success. Expect to be deployed to address complex problems by identifying the scope of the issue and quickly establishing innovative and functional solutions.BASIC QUALIFICATIONS- Bachelor’s degree in electrical engineering, aerospace engineering, computer science or a related field.- 5+ years of hands-on testing experience.- 5+ years in design and validation of hardware systems.- 5+ years in a development environment- 5+ years developing and executing test plans for complex aerospace, automotive or consumer electronics systems.- 2+ years of scripting or programming experience (Python, MATLAB, C)PREFERRED QUALIFICATIONS- Experience in development of test plans and protocols related to established Space Hardware test processes (GEVS / SMC-S-016)- 5+ years with integration and testing of satellite hardware.- 5+ years in a development environment.- 5+ years of scripting or programming experience (Python, MATLAB, C)- Demonstrated ability to plan and execute test campaigns on complex systems.- Experience as a technical lead, leading small groups of engineers through product development or test campaigns.- Demonstrated ability to apply critical thinking in complex situations- Excellent problem-solving, root causing and analysis skills- Strong organizational, analytical, and root cause analysis skillsAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $136,100/year in our lowest geographic market up to $235,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.We are looking for an engineer that epitomize technical and operational excellence – that can drive innovation and apply state-of-the-art technologies to solve real-world challenges. Full cycle product development experience from inception through maturity is essential. Working simultaneously on projects in different phases is common; you can demonstrate robust design and validation skills in addition to the understanding of mechanics of ongoing operational excellence and product support. You are responsive, flexible, and able to succeed within an open, collaborative peer environment.Export Control RequirementsDue to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesWe are looking for Electrical Test Engineer(s) capable of operating in a fast-paced, ever-changing, multi-platform international manufacturing and production environment. Our Electrical Test Engineers manage and develop test plans and lead strategies across numerous platforms and architectures. They establish and automate tests for hardware using scripting while ensuring the required specifications are met, including analyzing and recording data. They are expected to handle personal project management, execution, and ongoing hardware test support of all products in production as well as new product introductions. We are looking for leaders in hardware design, test, and process development.As an Electrical Test Engineer on our team, you will be responsible for owning end to end factory PCBA and system-level test strategy for new hardware devices. You will be a key member of the development team and will be the main interface with the internal Operations team as well as our Contract Manufacturers (CM). In this role, you will:* Define test strategy, implement and optimize test setup/processes at the CM including design and qualification of test fixtures, test equipment, and test software* Investigate and introduce new manufacturing test technology and methodology to enhance production efficiency* Review datasheets, schematics, block diagrams and provide feedback on best design practices* Drive test requirements, specifications, and limits with the hardware development team* Work concurrently with the design engineers to provide design for testability (DFT) feedback throughout the design process* Investigate and troubleshoot yield issues during prototype and production builds* Review hardware designs to define test coverage to ensure products are built free of manufacturing defects* Deploy and provide training* Develop test station procedures, preventative maintenance plans, and troubleshooting guides to support productionAbout the teamBASIC QUALIFICATIONS- Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science or related field- 5+ years of experience in manufacturing/operations of electronic devices- Interface and guide ICT/FCT development with a contract manufacturer experience- Experience in schematic capture and HDI board layout using Cadence, or equivalent- Analog design expertise, including experience with switching power supplies, LED drive circuitry, and measurement of analog signals- Circuit design experience with microcontrollers, firmware, and programmable logic- Interested and able to travel internationallyPREFERRED QUALIFICATIONS- MS or PhD in Electrical, Mechanical, Manufacturing or Computer Engineering with 3+ years’ industry experience- Experience in designing or specifying electrical test interfaces for functionally testing electrical subassemblies- Experience in circuit-level debug to the component level- Excellent verbal and written communication skills- Demonstrated understanding of quality metrics, process characterization and mapping, Product Quality / Reliability / Improvement techniques, LEAN Manufacturing, DFM/DFT, and Continuous Process Improvement- Understand Design for Testability, Design for Manufacturability- Experience in one of these languages: C/C++, Java or Python- Proven track record of releasing manufacturing test for products from concept through production- Experience working with International CM Partners- Mechanical CAD skills are a PlusAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,600/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.We are hiring for an experienced Electrical Engineer responsible for ensuring electrical integrity across spacecraft harnessing systems, with a primary focus on test harnessing and a secondary support role for flight harnessing. This candidate will own the development, validation, and enforcement of harness design standards to mitigate issues such as noise, crosstalk, and unintended behavior.Key job responsibilities* Electrical Integrity Ownership: Lead analysis and mitigation strategies for signal degradation, transient susceptibility, and electromagnetic interference (EMI) in test harnesses and test systems; extend to flight harnesses as needed.* Grounding & Shielding Strategy: Define and validate grounding schemes (single-point, multi-point, hybrid) for test systems and shielding approaches for sensitive signal lines.* Harness Design Standards: Specify technical requirements for: * Shielded vs unshielded cable use * Twisted pair implementation * Low speed, high speed, and RF signals * Separation and routing guidelines for mixed-signal harnessing* Design Review Participation: Partner with flight and test engineering teams during early design phases to influence harness design and interconnects to ensure electrical signal integrity.* Failure Investigations: Serve as the go-to owner for root cause analysis (RCA) of test harness anomalies relating to electrical integrity, test harness and verification anomalies, and electromechanical test system.* Documentation & Compliance: Develop interface control documents (ICDs), block interconnect diagrams (BIDs), electrical schematics, test harnessing specifications, and a signal integrity standards library.BASIC QUALIFICATIONS- BS degree in electrical engineering or equivalent.- Experience in developing functional specifications, design verification plans, functional test procedures, and root cause investigations- 5+ years of experience in design or systems architecture role working with wire harnesses and related test systems.- Experience with setup, control and automation of lab equipment like spectrum analyzers, signal generators, electronic loads, power supplies, network analyzers, high-speed oscilloscopes, etc.PREFERRED QUALIFICATIONS- Master's degree in electrical engineering, computer engineering, or equivalent- Experience in requirements definition and derivation using modelling, simulation and other analysis tools.- Experience in spacecraft or high-reliability electronics environments- Experience with harness design and testing methods (DWV, IR, NEXT, FEXT, TDR, VSWR, etc.) for complex systems- Experience with ECAD software KiCad, Altium, Expedition, and/or Mentor Graphics- Familiarity with MIL-STD-461, IPC/WHMA-A-620, or similar EMI and harnessing standards- Strong cross-functional communication skills with avionics, systems, test, and harness manufacturing teamsAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Our goal is to be Earth's most customer centric company, and we are just getting started. We need people who want to join an ambitious program that continues to push the state of the art in space-based systems design.Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesWe are looking for an excellent engineer who combines superb technical and analytical capabilities with a demonstrated ability to get the right things done quickly and effectively:• Develop/specify launch vehicle integration solutions for various launch providers.• Design of electrical ground support equipment for Kuiper satellites.• Develop qualification plans to validate launch vehicle and ground system integration hardware and software.• Support occasional (10-15%) travel to launch sites and external vendors.• Coordinate with internal customers to support production and launch campaigns.• Lead and participate in system design and qualification reviews.• Provide inputs and/or review to procedures for integration and test. • Be a technical role model; instilling best practices across the full development lifecycle.A day in the lifeAs a Senior Systems Integration Engineer, you will be a member of the launch vehicle electrical integration team, focusing on the design and deployment of launch and ground support systems. You will be expected to lead a variety of tasks such as specifying and developing launch vehicle interfaces, qualifying end-to-end launch vehicle integration and dispense systems, and developing electrical ground support hardware/racks. You will oversee external vendor and launch partner integration testing, providing technical review and feedback. Additionally, you will provide procedure review and input for our internal and external partners for vehicle integration and testing. As a senior member of the team, you will serve as a technical role model and ensure high-quality and innovative solutions are pursued. You will work with a team of top-notch engineers and collaborate with multiple other spacecraft design and integration teams. You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved at scale before. Along the way, we guarantee that you will learn a lot, have fun and make a positive impact on tens of millions of people!About the teamOur team is responsible for delivering launch vehicle integration and ground support equipment supporting Project Kuiper’s LEO satellite constellation. We take ownership and work hard to deliver the highest quality solutions to support the long-term success of Project Kuiper. This team consists of a broad set of technical backgrounds, and we look forward to welcoming people that are excited to help us deliver broadband internet to underserved communities!BASIC QUALIFICATIONS• BS degree in electrical engineering, or equivalent.• 7+ years in hardware development and/or hardware testing.• Experience in specification and development of electrical systems support hardware.• Proficiency designing and interpreting electrical schematics.• Experience in electrical power delivery and supporting harnessing.• Experience with network communication protocols.PREFERRED QUALIFICATIONS• Experience in payload launch vehicle integration.• Experience in satellite/spacecraft assembly, processing, and integration.• Experience in development and/or deployment of electrical ground support equipment.• Experience with development of hardware in loop testing for automotive and/or aerospace systems.• Experience writing scripts in at least one language (Bash, Python, Ruby, etc.).• Experience in a development or testing role across full product life cycle (concept to production at scale) in Consumer or Industrial Electronics (including Power Electronics, Robotics, Aerospace, Automotive, and/or Communications fields).Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $136,100/year in our lowest geographic market up to $235,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The RoleThis role of a Software Engineer who will design, implement, and operate globally available distributed systems geared towards giving Kuiper the ability to operate within realistic virtual Kuiper environments at scale. You’ll build systems using the latest AWS technologies, leveraging best-in-industry software engineering practices.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities- ARM A, M series or ARC processor emulator experience.- Knowledge of networking protocols and applications, including TCP/IP. should include L1-L2.- embedded software testing tool development- have worked on FreeRTOS or any real time operation system before.- Have expertise with Linux and RTOS- Invent new tools that enable more frequent and reliable software deployment, test execution, and data analysis as part of a continuous integration and release system.- Develop tools that allow for test execution across multiple environments: virtualized hardware, real hardware-in-the-loop simulations, and on-orbit testing.- Design and Implement Distributed Cloud-based Services and APIs- Partner with device software, frontend, networking, and security engineering teams- Evangelize engineering excellence best practices and mentor junior engineers.- Design and Implement embedded modeling and simulation for broadband access technologies: LTE, WiMax, WiFi or similar- Solid aptitude in protocol standards such as IPv4, IPv6, Mobile IP, LTE, 802.16e, 802.11b/g/n/ac.- Knowledge of object-oriented programming concepts.- Strong theoretical background in Wireless Networks.- Experience with systems integration and testing methodologies.- Knowledge in several of the following: network protocols and applications including TCP/IP, QoS algorithms, cellular/satellite network protocols, software defined networks, network security.- Write high-quality Linux based software for common processors and microcontrollers (e.g. ARM, PowerPC, x86, etc.)- Deep understanding of testing, continuous integration, build, deployment & continuous monitoring.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeThis role is for a Software Development Engineer who will build new cloud services and APIs that facilitates and orchestrates simulation of software on Kuiper devices such as satellites, ground gateways, and customer terminals. You will be building low-latency, highly scalable architecture that are critical to getting high quality internet service to customers.About the teamWe build the cloud systems and APIs for software running on Kuiper devices to run simulation to achieve high quality software ultimately deployed onto hardware. BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming languagePREFERRED QUALIFICATIONS- 3+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experience- Bachelor's degree in computer science or equivalentAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $129,300/year in our lowest geographic market up to $223,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Manufacturing systems engineering under Project Kuiper Prod-Ops is responsible for delivering software and frameworks that improve speed and quality of testing of satellite components. We partner with engineering and production teams to bring reliability and repeatability to our systems, improve throughput and accelerate the transition. We are looking for a software engineer with experience in building software development kits, creating mock services and simulators, add integrations with industry standard tools such as Test stand and Labview. Candidate will have hands on experience in programming languages like python, java, and is familiar with AWS cloud services and preferably familiarity with software - hardware interfaces.Key job responsibilitiesThe candidate would participate in all phases of software development from requirements through implementation and test. You will engage with an experienced cross-disciplinary staff to conceive and design solutions. You must be responsive, flexible, and able to succeed within an open, collaborative peer environment. You will work with cross-functional partner teams and lead efforts with engineers from requirements to deployment.About the teamMSE team builds solutions to deliver fully automated stations capable of instant pass/fail analysis to help improve throughput and operator efficiency. MSE’s responsibilities include documentation of testing requirements, delivery of the software frameworks, libraries and tools necessary to automate stations and types of tests (Vibration Testing (Vibe), Thermal Vacuum Chamber (TVAC), Thermal Cycling (TC), and Highly Accelerated Stress Screen (HASS)), improvement of test station designs to increase throughput and improve operator safety and efficiency. This end-to-end ownership will allow MSE to streamline and improve the entire process, from station design to implementation and support, ensuring process consistency and seamless integration of all manufacturing systems across all production sites.Internal job descriptionKey job responsibilitiesThe candidate would participate in all phases of software development from requirements through implementation and test. You will engage with an experienced cross-disciplinary staff to conceive and design solutions. You must be responsive, flexible, and able to succeed within an open, collaborative peer environment. You will work with cross-functional partner teams and lead efforts with engineers from requirements to deployment.About the teamMSE team builds solutions to deliver fully automated stations capable of instant pass/fail analysis to help improve throughput and operator efficiency. MSE's responsibilities include documentation of testing requirements, delivery of the software frameworks, libraries and tools necessary to automate stations and types of tests (Vibration Testing (Vibe), Thermal Vacuum Chamber (TVAC), Thermal Cycling (TC), and Highly Accelerated Stress Screen (HASS)), improvement of test station designs to increase throughput and improve operator safety and efficiency. This end-to-end ownership will allow MSE to streamline and improve the entire process, from station design to implementation and support, ensuring process consistency and seamless integration of all manufacturing systems across all production sites.BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming languagePREFERRED QUALIFICATIONS- 3+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experience- Bachelor's degree in computer science or equivalentAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $129,300/year in our lowest geographic market up to $223,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,000+ satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Key job responsibilitiesAs a System Development Engineer in the Bus S&Flight Operations team, you will work with a wide variety of functional groups and will be involved in the design and implementation of software systems for the full cycle of provisioning of Satellites and ancillary, as well as overall system integration:- Develop tools for pre- and post- vehicle validation and testing- Support software bring-up, debug of new hardware.- Work closely with cross-functional teams to design and implement optimized validation and verification software.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeHave you wanted an opportunity to develop the software applications and services for an advanced global communications service This role is for a SysDev who will design, build, and maintain components and services of Project Kuiper's Customer eCommerce Services and interact with the core Kuiper Network.About the teamOur team owns developing the architecture, solutions & roadmap for managing the customer lifecycle for communications services; including identity and account management, subscriber management services, user provisioning, billing and payments, customer and technical support tools, offer management tools, and customer metrics and analytics.BASIC QUALIFICATIONS- BS or MS in electrical engineering, computer engineering or computer science, or equivalent experience- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience with Java and Python or other scripting languages. Experience automating, building, and testing systems- Experience with HW/SW bring up and debugging- Experience working in a hardware labPREFERRED QUALIFICATIONS- Solid fundamental CS / EE skill set with hands-on industry or university experience in embedded software development- 3+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experienceAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $89,200/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individualhouseholds to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.We're looking for an experienced Manufacturing Engineer to lead Battery Pack production development.As the lead Manufacturing Engineer for a Line Replaceable unit at Project Kuiper, you will be directly responsible for the production process development, introduction, improvement, & maintenance of a key module on our spacecraft. You’ll be the leading technical voice for a team of lab engineers, assembly/test technicians working on the product, solving challenging technical problems associated with manufacturing and delivering a battery pack for integration on a spacecraft and ultimately to space.You will serve as a key lynchpin connection design/development, factory operations, quality engineering, program management, and more as you drive the manufacturing processes, we use from initial production introduction to full rate production.You’ll solve complex industrial challenges associated with balancing production velocity, exceptional quality, and cost competitive production concepts while ensuring smooth technical execution of current production operations. You’ll be a key animating force in the increase in production capacity through vision & execution of capital investment for production scaling & automation.Key job responsibilities- Develop and maintain all manufacturing artifacts (MBOM, Routing, Work Order Template, Work Instructions, etc.).- Become the subject matter expert in the build and test processes of manufacturing a battery pack- Serve as the catalyst to un-block and improve production processes through direct production support with non-conformances, troubleshooting, process improvement activities, and training.- Conceptualize, design, develop, and improve production processes (assembly, integration, test processes).- Serve as primary technical interface to development team for Battery Pack assembly and test, participating as the lead technical voice from the factory in Design Reviews, key technical escalations, and new product development activities.- Own the capacity increase roadmap for production including defining the relevant capital equipment required for rate increase and helping to lead the design, procurement, install, and qualification of new rate enabling equipment.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the life- 50% - On the shop floor, working with production teams to implement new processes, review & solve key technical blockers in production, performing production development testing, etc.- 40% - Independent development work such as identifying and implementing key production improvement actions, acting on quality escapes by developing and implementing new quality control measures, developing & executing to existing roadmaps for capacity increase, process simplification, etc.- 10% - Meeting settings, collaborating with others on topics such as new design introductions, production process change management, production solution finding reviews, etc.BASIC QUALIFICATIONS- Bachelor's Degree in Engineering (Manufacturing/Mechanical/Aerospace/Industrial/Electrical) or related discipline, or equivalent experience- 5+ year experience with integrating, testing and troubleshooting mechanical and electronic systems- 5+ year experience with Computer Aided Design tools such as Solidworks or NX/Unigraphics- Familiarity with Low-Rate Manufacturing Environments & New Product Introduction- Knowledge of Lean manufacturing practices & principles- Experience with Root Cause Analysis Techniques such as Fishbone, Fault Tree, DMAIC, or related technologies/processes- Technical writing experience, including work instructions, standard operating procedures and/or test plans- Experience working with interdisciplinary teams to execute product design from concept to production- Experience with the project management of technical projectsPREFERRED QUALIFICATIONS- Technical writing experience, including work instructions, standard operating procedures and/or test plans.Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Come work at Amazon!As the HW Production Support Engineer, you will enable the successful delivery of the satellite RF hardware into the Kuiper satellite integration line. Consequently, you will work with the hardware engineering team and the production teams. This position requires a technical understanding of functions of the RF hardware and strong lab and test skills. You must be able to work effectively cross-functionally with multiple disciplines. In this role you will: • Troubleshoot non-performing flight RF hardware units, determine next steps, and lead the resolution plan to full completion• Work closely with the test engineering team to improve test stability, reduce test time and guaranty the quality of the measurement data.• Implement design changes to hardware to improve unit performance going forward• Track performance trends of units in high volume space production line• Work closely with production manufacturing engineering to improve process flow and reduce test errors or workmanship errors. • Work closely with the quality and manufacturing engineering teams to ensure high quality space flight hardware• Troubleshoot and repair circuits and fixtures.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities• Will work cross-functionally on collaboration to fluently engage with diverse engineering disciplines, effectively advocate for RF hardware in production, and ensure alignment of stakeholders for overall production rate• Facilitate the production of high performance, space flight Ka-Band and V-band frequency converters, Front End RF, LNAs and SSPAs. • Support manufacturing engineers on production testing of RF avionics components and systems• Support test engineering on test methods, efficiencies, and accuracy• Troubleshoots and repairs circuits, fixtures, and test setups.• Track various KPIs from production and production testing and communicate regularly with management.BASIC QUALIFICATIONS- Bachelor's degree or higher in Electrical Engineering, or related discipline, or 3+ years of equivalent relevant experience- Experience coordinating amongst diverse disciplines (software, production, reliability) to drive full-lifecycle system development- Experience with RF/ microwave test of receivers, transmitters and sub-systems up to 50 GHz.- Experience with design or sustaining (debug) of complex digital systems containing FPGA or ASIC.- Experience debugging Linux-based systems.- Experience with troubleshooting failed units using lab equipment such as spectrum analyzers, network analyzers, power meters, noise figure meters, etc.- Excellent understanding of the test and measurement metrology.PREFERRED QUALIFICATIONS- Master's degree in electrical engineering or equivalent- Master's degree or PhD in electrical engineering and 5 years of industry experience in RF/microwave circuits or communication theory- Experience performing cascade analysis and simulation of communication components- Thorough understanding of RF passive and active components and circuitry- Knowledge of digital communication systems, spread spectrum, forward error correcting codes (FEC), single and multi-carrier techniques, modulation types such as PSK, APSK, QAM, OFDM- Understanding of electromagnetic propagation and antenna systems- Experience with RF test equipment such as spectrum analyzers, network analyzers- Experience mentoring engineers in engineering best-practices and domain-specific technical principlesAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,600/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.