Gladewater, TX • (24.2 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benef

Gilmer, TX 75644 • (33.6 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benef

Gladewater, TX • (24.2 miles) • Full Time • $25.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform

Gilmer, TX 75644 • (33.6 miles) • Full Time • $25.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform

Gladewater, TX • (24.2 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic

Gilmer, TX 75644 • (33.6 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic

Tyler, TX 75701 • (1.2 miles) • Full Time • 9/25/2026

Benefits:Voluntary Life InsuranceShort and Long Term DisabilityMedical, Dental and Vision401K Matching (after 6 months of employment)Company work truck is provided* offered after 60 days of employmentCompany Overview Generator Supercenter, Inc. is a leading provider of energy solutions committed to making a positive impact for our customers and environment. We specialize in energy solutions offering cutting-edge technologies to help our clients utilize clean, renewable energy for savings from the grid and backup power. Job Summary The Generator Mechanic/Service Technician will consult with the Service Manager to plan their work and travel schedule in the surrounding area. Using our company-supplied vehicle, you will travel to the customer’s residence to perform repair work and preventative

Kilgore, TX 75662 • (24.1 miles) • Full Time • 9/24/2026

***This job has preference to qualified local job seekers within 60 miles of our Axis Kilgore, TX facility.Reporting to Operations management, the Pumping Foreman leads field pumping operations and directs assigned crew members in the safe and efficient rig-up, operation, maintenance, movement, and rig-down of pumping equipment, tools, and related assets at the shop, yard, and customer locations. This position serves as a field-level leader responsible for coordinating job execution, verifying equipment readiness and pressure-control activities, communicating with customers and other service lines when designated, and coaching Pump Operators and new employees on safe work practices, job procedures, equipment operation, and documentation requirements.Essential Duties and ResponsibilitiesThe

Henderson, TX • (31.1 miles) • Full Time • 9/24/2026

Job OverviewUS Industrial Sourcing is looking to fill labor position for assembly type work, with the potential for lead positions. We have several departments and do cross training for each area. Position can also require maintenance of facility grounds when needed and general upkeep of facility. The hours are Monday through Friday 7:30 am to 4:15 pm and Saturday as needed. Knowledge of hand tools and tape measure a plus, paid in house training is provided. Must have a good work ethic and not need to be under direct supervision. You will need to be able to pass a drug test along with random tests if hired. Salary based on experience.ResponsibilitiesAssemble parts and components accurately according to schematics, blueprints, and work instructions.Use hand tools, power tools, calipers, mic

Tyler, TX 75703 • (7.1 miles) • Full Time • 9/24/2026

Production ManagerCable’s Roofing is always interested in connecting with experienced professionals who may be a strong fit for our team. While we are not actively filling this position at this time, we are keeping our options open for an experienced Production Manager for our Tyler, Texas office.This role is responsible for overseeing the day-to-day production of roofing projects from scheduling through completion. The Production Manager works closely with Project Managers, crews, suppliers, sales, and office staff to make sure jobs are properly prepared, completed efficiently, and closed out accurately.The right person will be organized, proactive, accountable, and comfortable managing both people and moving parts. Strong communication and follow-through are extremely important in this r

Kilgore, TX 75662 • (24.1 miles) • Full Time • 9/24/2026

Revolution is now hiring for an Production Operator positions in Kilgore, TX. This position works Monday - Friday, some Saturdays from 7:00 am - 3:00 pm or 11:00 pm - 7:00 am.Follow all Environmental Health & Safety policies and proceduresTo ensure that product that is being produced is good quality following the guidelines set down by the Quality Control Department.To keep their workstations and surrounding areas clean, neat and organized.Be able to troubleshoot and make repairs on any Converting Department production line. This is for production machine problems or minor maintenance repairs.Must have hand tools to do the job following outline from the operator’s tool list.Must follow all housekeeping and good operating procedures as set down by the American Institute of Baking.Must be ab

Longview, TX 75602 • (37.5 miles) • Full Time • 9/24/2026

MicroMetl Corporation is currently the largest independent manufacturer of accessories for commercial heating and cooling equipment. With over 60 years of industry experience and service, we continue to grow throughout the Midwest and Southwest regions. We offer a competitive benefits package that includes wages, medical/dental/vision coverage eligibility, employer-paid basic life insurance and short- and long-term disability, profit sharing bonus eligibility, a 401(k) with employer match, PTO, and holiday pay. MicroMetl Corporation is dedicated to company values including honesty, integrity, and supporting teamwork and diversity, while maximizing the potential of our greatest asset: Our Employees! We are looking to add a few Machine Operators to our Longview, Texas team. This role operat

Athens, TX 75751 • (41.1 miles) • Full Time • 9/24/2026

Argon Medical is a global manufacturer of specialty medical products, headquartered in Plano, Texas. Argon offers a broad line of medical devices for Interventional Radiology, Vascular Surgery, Interventional Cardiology and Oncology. Argon’s brand is recognized for best-in-class products that improve patient outcomes via percutaneous, image-guided procedures. Our values describe what we believe in and how we operate. These values are our moral compass which guide our decisions and define the deeply held beliefs and principles of our organizational culture. Argon Medical is a family of individuals united by a mission and culture which continue to grow stronger every day.Excellent opportunity for an Industrial Maintenance Mechanic in Athens, TX!What you will do:The Industrial Maintenance Mec

Tyler, TX 75702 • (2.5 miles) • Full Time • 9/23/2026

Who You Are:You’re energetic and enjoy working outdoors. You understand that this space can be demanding, and you are equipped with the skills necessary to get the job done. You have at least seven years of combined experience. Bachelor’s degree with 3 years of field experience. Associate degree with 5 years’ experience. 7 years of utility vegetation management experience.We’re dedicated to the growth of our employees. We truly believe in your development. For those who show initiative, we will do what it takes to get you where you want to go.We’re growing but still maintain an entrepreneurial spirit. We give you room to be accountable and responsible in your role. We believe progress is bred through innovation and we encourage our employees to bring their ideas forward.We’re safety focuse

Longview, TX 75602 • (37.5 miles) • Full Time • 9/23/2026

Salary:Other Forms of Compensation: Yearly Bonus OpportunityGrowth. Opportunity. Excellence.Fresh & Ready Food Group is a member of Canteen. Canteensets the national standard forexcellencein automated retail, andEVERYsegment of our business is thriving.We employ the best team in the industry and their dedication, collaboration and passion fuel ourgrowth.YOUbring enthusiasm, customer service, and commitment; we’ll supply theopportunityand innovation.TOGETHERwe’ll continue transforming the micro-market, dining, coffee, and vending industry.Come grow with us. We are Canteen.Job Summary:The Quality Assurance Specialist is responsible for supporting food safety and quality initiatives to ensure compliance with FDA, USDA, SQF, and customer requirements. This position maintains HACCP and food saf

Athens, TX 75751 • (41.1 miles) • Full Time • 9/23/2026

We are currently seeking a motivated and detail-oriented Part-Time Office Machine Operator to join a Local Company. The Ideal candidate will play a crucial role in ensuring the smooth operation of office machinery and fabric labeling processes. This position requires precision, attention to detail, and the ability to work efficiently.Key Responsibilities:Operate office machinery, including but not limited to rolling fabric on bolts.Create and print labels from a computer using labeling software.Accurately label fabric according to company standards.Maintain and troubleshoot office machines to ensure they are in proper working order.Assist with inventory management and organization.Perform other related duties as assigned.Qualifications:Previous experience in a similar role is preferred.Pro

Tyler, TX • (1.8 miles) • Full Time • 9/23/2026

DescriptionHOLT CAT is the Largest Caterpillar dealership of heavy equipment in the United States. We have a full-time, Shop Service Technician position available at out Tyler, Texas, location. This mechanic position is responsible for performing inspections, diagnoses, and repairs of diesel-powered heavy equipment and/or related equipment or components, following established procedures and guidelines. Works independently or as a member of a team to provide mechanical services that satisfies customer needs and achieves departmental goals.Entry-Level Position – Generally has two or more years of experience and/or demonstrated job relevant knowledge/skills. Relies on instructions and pre-established guidelines to perform the functions of the job; works under moderate supervision.The incumben

Tyler, TX 75701 • (1.2 miles) • Full Time • 9/22/2026

Position Title: Quality Control Specialist IFLSA Status:Non-ExemptReports to:Deposit Operations ManagerJob Summary: Responsible for receiving, processing, and maintaining deposit account documentation to ensure accuracy, compliance, and adherence to Bank policies and procedures. This position supports all consumer and non-consumer demand deposit account (DDA) products, including checking, savings, certificates of deposit (CDs), individual retirement accounts (IRAs), and safe deposit boxes (SDBs). The specialist works closely with branch personnel to identify documentation deficiencies and maintains the integrity of customer account records.Essential Functions:Accurately and efficiently completes quality control reviews of all newly opened and maintained consumer and non-consumer deposit ac

Jacksonville, TX 75766 • (27.1 miles) • Full Time • 9/22/2026

When Alfred Fain founded a small Rhode Island tire store in 1924, at the time no one could have predicted how Teknor Apex would become an international custom compounder sought out by companies around the world. After a nearly hundred-year journey that’s carried us through acquisitions and expansion, we now have nine U.S. locations, as well as operations in Belgium, Singapore, Germany, and China.Throughout this global expansion Teknor has remained a privately held company, and today Fain’s grandson sits at the helm, maintaining the family’s tradition of fostering deep employee and customer relationships. These relationships are what allow ustogetherto deliver customized compound solutions and help our customer’s create better products.“Manufacturing is a team sport and we work together to

Longview, TX 75602 • (37.5 miles) • Full Time • 9/22/2026

Job Title: Manager, Production Location: Longview, Texas Direct Hire Relocation- Open Compensation: $110,000 - $165,000 Work Model: Onsite Overview System One is in search of a Production Manager for a privately held company to join their team in Longview, TX. This position is responsible for overseeing daily manufacturing operations to ensure safety, quality, efficiency, and on-time delivery. If you are interested in this opportunity, please apply directly, or reach out to Philis Tindell at ResponsibilitiesOversee daily manufacturing operations to ensure safety, quality, efficiency, and on-time delivery.Lead and supervise production teams to meet daily, weekly, and monthly output targets.Monitor production schedules and adjust resources to ensure timely delivery.Enforce safety protocols a

Jacksonville, TX 75766 • (27.1 miles) • Full Time • 9/21/2026

Klein Products is looking for a motivated individual to join our production team - Painter Spray:$16.00 - $27.00 depending on experience.2nd Shift (3:30 pm - 2:00 am).Monday - Thursday.Painter Spray Requirements:1+ years' experience.Positive attitude.Perform pre-painting activities on manufactured items in preparation for painting.Apply a variety of industrial coatings to fabricated metal products.Utilize instrumentation to measure painting parameters to ensure compliance with OEM specifications.Responsible for the application of industrial coatings in confined spaces.Assist in the maintenance of a clean and safe work environment and observe good safety habits.Adhere to all OSHA and HazMat Procedures with respect to the storage and handling of materials in the area.Responsible for reportin

Canton, TX 75103 • (37 miles) • Full Time • 9/21/2026

Road Ranger is looking for Subway Team Members to join the team at our under construction Canton, TX location! Competitive wages based upon experience. The store is schedule to open late January 2025.Road Ranger is GROWING and Hiring Immediately!!Are you looking for Part Time work? We have positions available!We offer benefits for our FULL and PART-TIME employees.Join the Road Ranger family and see how far your drive can take you!At Road Ranger, we aim to provide drivers with the warm hospitality, top tier fuel, quality food, and essential products they need along their journey. We owe our success to our friendly, driven employees who thrive in our fast-paced environment. To reward their hard work, we offer our employees a wide variety of competitive benefits to support their health and we

Henderson, TX 75652 • (33.3 miles) • Full Time • 9/20/2026

Our Millwrights are a key player in a company-wide continuous improvement effort through daily use of troubleshooting, and predictive and preventative maintenance strategies. As a member of this high performing team, you will be responsible for being a team player and working safely with all machinery within the mill.What you will do:Repair and maintain industrial equipment to include conveying systems, major machine centers such as debarkers, canters, gang saws, and edgersPerform preventative maintenance on equipment to ensure "Just in time" maintenanceMove machinery and equipment, using hoists, dollies, rollers, and trucksAdjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary partsAlign ma

Palestine, TX 75801 • (44.1 miles) • Full Time • 9/20/2026

Test the Product. Protect the Quality. Support Operational Excellence. Verdant Specialty Solutions is seeking a Quality Control Technician to support product quality, process consistency, and operational excellence at our Palestine, Texas facility. This role is responsible for inspecting and testing raw materials, in-process products, and finished goods to ensure compliance with company specifications, customer requirements, and applicable quality standards. You will work closely with operations, production, and plant leadership teams to conduct laboratory testing, maintain quality records, support continuous improvement initiatives, and help ensure products are manufactured right the first time. This role is based on-site at our manufacturing facility. Why This Role Is a Fit for You:Make

Hawkins, TX 75765 • (21.2 miles) • Full Time • 9/20/2026

OverviewPrimo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets.Factory Location: Hawkins, TX Compensation: $34.54 / hour Shift differential: 6%-8% of base hourly rate paid for applicable hours worked Schedule: 6:00 - 6:30 rotating 2-2-3 12 hour Day or Night Shifts based on availability and business needs Ability to work holidays and weekends per business needsResponsibilitiesRestoring machine to operating conditions during machine runtime failure in a team settingComplete reactive maintenance on production lines to recover from equipment failures by

Tyler, TX • (1.8 miles) • Full Time • 9/20/2026

Possible Available Positions:Quick Lube Technician Entry-Level Service Technician Experienced Service Technician Heavy Line Technician Transmission Technician Master Service TechnicianTechnician Specific BenefitsShop equipped with the newest technologyUniforms providedDiscounts on products and servicesHighly productive shopCareer advancement opportunities, promote from withinASE and state inspection certification reimbursement and all training expenses paid to further your careerContinued education, manufacturer hands on and web-based trainingClean and professional work environmentCompetitive wagesAdditional Benefits We OfferHealth InsuranceDental InsuranceVision InsuranceLife InsurancePaid VacationPaid HolidaysPaid Maternity LeavePaid Paternity LeavePaid BereavementPaid TrainingQuick Lube

Tyler, TX 75701 • (1.2 miles) • Full Time • 9/19/2026

Job Title: Sr. Electrical Engineer Job Location: Tyler, TX What You'll DoDevelop electrical engineering deliverables including SLDs, load lists, calculations, cable sizing and routing, lighting layouts, and grounding/lightning protection systems.Perform short-circuit, coordination, voltage-drop, motor-starting, arc-flash, and lighting calculations using ETAP and SKM.Prepare and review specifications, data sheets, and material requisitions for MV/LV switchgear, transformers, motors, UPS, VFDs, and lighting systems.Ensure designs comply with NEC, UL, IEC, IEEE, API standards and coordinate with multidisciplinary engineering teams.Support vendor clarifications, review vendor drawings, and assist with construction, testing, and commissioning activities.Estimate man-hours for project proposals

Longview, TX 75604 • (29.2 miles) • Full Time • 9/19/2026

Benefits:401(k)Competitive salaryHealth insurance401(k) matchingDental insurancePaid time offJob Summary: We are seeking a skilled and experienced Commercial Refrigeration Technician to join our team. The ideal candidate will be responsible for installing, maintaining, and repairing commercial refrigeration systems in various settings such as supermarkets, service stations, and industrial facilities. Benefits/PerksCompetitive pay based on experience.Health, dental, vision, supplemental and life insurance.Paid time off (PTO).401(k) retirement plan with company match.Company-provided vehicles, some tools, and phone allowance for work purposes.Responsibilities:Install, repair, and maintain commercial refrigeration systems.Diagnose and troubleshoot mechanical failures in HVAC and refrigeration

Longview, TX • (32.9 miles) • Full Time • 9/19/2026

Electronics Assembler – Job Description Job Category: ProductionEmployment Type: Full-TimeEssential qualifications and skills include a strong reasoning ability and working experience using Microsoft Word and Excel. Excellent communication skills are required for work in a team environment and interaction with coworkers and customers. ***This job requires Excellent manual dexterity and hand/eye coordination**. Job ResponsibilitiesHand placement of components on circuit board (thru-hole or surface mount)Form parts according to specifications, using pliers, calipers, cutters, and forming toolsRead and understand electronic schematics, work orders and assembly instructionsRecord data onto work orders or shop travelerInspect to detect malfunctions, and ensure conformance to specificationsPack

Kilgore, TX 75662 • (24.1 miles) • Full Time • 9/17/2026

Our Mission:Bishop Lifting Products, Inc. is the most trusted name in the lifting world. It has the deep expertise, services, and support to solve both routine and complex lifting challenges. We have the above and below-the-hook inventory customers need when they need it. And we have a culture of service and support that puts customer satisfaction first.Job Purpose:Testing of new and existing product to ensure that rate of capacity can be achieved without causing damage, deformation or permanent distortion to different products.Key Duties and Responsibilities:Conduct load testing on any products as required such as wire ropes, synthetic slings, etc.Input of necessary product information for creation of test certifications;Perform other functions as required.Job Requirements:Must maintain a

Chandler, TX 75758 • (13.6 miles) • Full Time • 9/17/2026

Working at Pizza Hut is about making hungry people happy. It's about being independent and having fun, making new friends and earning extra cash. As a Pizza Hut Cook, you can be the smiling face that cooks our food and serves the customers.You will learn how to cook from scratch. Working with us will give you financial rewards and flexibility to suit your lifestyle. You'll learn new things, get recognized for your efforts and learn skills that last a lifetime.What are we looking for?The good news is that your training will teach you everything you need to know to succeed in the job. But there are a few skills you should have from the get-go:You're a fun and friendly person who values customers and takes absolute pride in everything you do. Communication skills are key – you’re not going to

Longview, TX 75602 • (37.5 miles) • Full Time • 9/17/2026

Position Title: PRODUCTION MANAGERSalary: $60,000 - $65.000Location: Longview, TXOther Forms of Compensation: Potential BonusGrowth. Opportunity. Excellence.Canteenbrings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary.Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel ourgrowth.Interested in joining our team? Youbring the enthusiasm, customer service, and commitment; we’ll supply theopportunityand innovation.Together,we’ll continue to transform our industry.Come grow with us. We are Canteen.This position is eligible for an

Tyler, TX • (1.8 miles) • Full Time • 9/17/2026

We are looking for a Service Technician to join our growing team! The right candidate will have a strong service technician background and ASE certified. The day-to-day duties include performing work on specific repair orders and diagnosing what repairs need to be done. Benefits:Health InsuranceDental InsuranceVision InsuranceLife InsurancePaid VacationPaid HolidaysPaid Maternity LeavePaid Paternity LeavePaid BereavementPaid TrainingResponsibilities Perform work specified on the repair order with efficiency and in accordance with dealership Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioni

Kilgore, TX 75662 • (24.1 miles) • Full Time • 9/17/2026

OverviewWieland - Creating Value for Generations!Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material.Wieland's Cultural ValuesWieland’s culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities.With our cultural vision, we place our core values at the heart of everything we do:safety,ambition,optimism,reliability,ownership,diversity, &respect.Wieland is hiring a Operator, Machine and Foundry. The Operator, Machine and Foundry will be responsible for supportin

Longview, TX 75602 • (37.5 miles) • Full Time • 9/16/2026

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and ext

Tyler, TX 75701 • (1.2 miles) • Full Time • 9/15/2026

Outside Plant Tech IJob Type: Full TimeDUTIES AND RESPONSIBILITIES:• Assist in the day-to-day tasks associated with outside plant fiber network deployment and operations, including construction management, progress reporting, maintenance and record keeping.• Assist in preparation and splicing of fiber enclosures, fiber panels, bonds/grounds and test fiber optic equipment to division standards.• Assist in Perform ring cuts, butt-splices, enter splice cases on live fiber without affecting existing services; both aerial and underground• Help perform fiber tests with OTDR’s, visible light source and meters.• Assist in the installation of fiber optic communication equipment and Inside plant patch panels.• Install aerial and underground enclosures and other fiber related telecom equipment.• Must

Tyler, TX • (1.8 miles) • Full Time • 9/15/2026

Company Description The Process Specialist supports high-volume manufacturing operations through process optimization, technical problem-solving, continuous improvement initiatives, and operational support. This position works closely with Production, Quality, Maintenance, and Supply Chain teams to improve safety, quality, productivity, equipment performance, and cost effectiveness. The role is responsible for driving operational excellence through data analysis, process improvements, and implementation of best practices.Job Description Process Specialist (Pipe)Location:Tyler, TXPay:$36.09/hourShift Hours:1st or 2nd Shift, as neededWhat You’ll Do Process Improvement & Optimization • Analyze manufacturing processes to improve throughput, efficiency, and overall performance. • Identify and e

Kilgore, TX 75662 • (24.1 miles) • Full Time • 9/15/2026

Description: POSITION SUMMARYSupports quality operations by performing inspections, maintaining quality records, and assisting with non-conformance documentation and supplier quality activities.ESSENTIAL DUTIES & RESPONSIBILITIESPerform dimensional and visual inspections on incoming, in-process, and finished partsRecord inspection results in quality records and ERP systemIdentify and tag non-conforming material and initiate NCR documentationAssist with first article inspections (FAI) and qualification testingSupport internal and customer quality auditsMaintain calibrated measuring equipment and calibration recordsAssist Quality Manager with data entry, reporting, and filingRequirements: REQUIRED QUALIFICATIONSHigh school diploma or GED2+ years inspection or quality control experience in ma

Longview, TX • (32.9 miles) • Full Time • 9/15/2026

Role: Production ManagerLocation: Longview, TXSalary: $120,000 - $130,000 Benefits: This role is eligible for medical, life and disability insurance, PTO, 401k.Summary:This role is responsible for overseeing the direction and performance of a key operational area, ensuring strong output, efficiency, and team effectiveness. The position focuses on optimizing production processes, supporting strategic initiatives, and maintaining alignment with organizational goals.The manager is accountable for improving operational workflows, enhancing productivity, and ensuring consistent execution across the department. This includes identifying opportunities for process enhancements and implementing solutions that drive measurable performance gains.In addition, the role supports financial planning activ

Longview, TX • (32.9 miles) • Full Time • 9/15/2026

WHAT IS ON OFFERAlfred H Knight has an opportunity for a General Inspector to work with our Inspection team, based in the Longview, Texas area. You will be responsible for ensuring client instructions are carried out at agreed consignment locations, acting as an independent party to verify compliance with agreed processes and inspection and supervision procedures and providing details to clients regarding the handling of their product/s.ABOUT USAlfred H Knight is a totally independent, family owned business spanning five generations. A global network of strategically placed offices and laboratories enable global trade by providing independent inspection, analysis and consultancy services to the metals and minerals, solid fuels and agriculture industries.We have honed & carefully crafted ou

Longview, TX • (32.9 miles) • Full Time • 9/15/2026

Job Title: Shop ForemanReports to: ROB VAN HEISELocation: LONGVIEW TXPosition Summary: The Shop Foreman oversees daily shop operations, coordinates workflow, supervises technicians AND, enforces safety and quality standards, and ensures on-time completion of production and repair work. The Foreman acts as the primary point of contact for personnel issues, scheduling, equipment maintenance, and process improvement.Key Responsibilities:Supervise and lead a team of 8 technicians, machinists, and/or mechanics; assign tasks and monitor performance.Schedule daily work, prioritize jobs, and allocate resources to meet customer deadlines and production targets.Ensure adherence to quality standards and customer specifications; inspect work and perform final checks.Enforce shop safety policies, maint