SEARCH
GO
Skilled & Trades Jobs
Full Time
7/16/2024
Converse, TX 78109
(12.5 miles)
$18.00 / hr
Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized
Full Time
6/24/2024
San Antonio, TX
(3.4 miles)
$15.00 / hr
RoadSafe Traffic Systems imageRoadSafe is looking for Flaggers to join our team!
Hiring Flaggers that have a valid driver's license. Starting pay is $15 per hour.
Work with the Traffic Control Department at work sites to direct motorists by flagging them away from worker activities, moving equipment, oncoming traffic and perform duties listed below:
Set-up signs, cones, etc. around work areas to divert traffic Follow all safety rules and regulations and wear proper safety equipment (work boots – 6 inch with safety toe, hard hat and safety vest) Without Supervision must be able to set up and perform flagger position at job site based on site plan and or contractor directions Adhere to all Company Policies and Procedures Generally works under the Supervision of Project Manager, TCT, TCS, or Flagger II or maybe assigned to work independently Complete daily paperwork accurately and timely Operate 2 way radio Work well in a team environment Provide highest level of customer service to all customers Excellent attendance required, dependable transportation, good work ethic All other duties as assigned
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer
Qualifications: Must be able to read and speak English Driver’s license required Pass a drug test High School Diploma or GED Experience in Flagging/Traffic Control is preferred, but we offer training Hold a current Flagger certification or the ability to pass Company sponsored Flagger Certification Ability to lead a small crew Successfully pass Company sponsored Defensive Driver training
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.
Full Time
7/26/2024
San Antonio, TX 78208
(4.4 miles)
About Dent WizardDent Wizard is the nation’s undisputed leader in automotive reconditioning services and vehicle protection products – and our success is the result of the great people who serve our customers. We’re stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve.Put the wheels back in motion. Be a Wizard.As a Wheel Technician with Dent Wizard, you’ll use the latest tools and techniques to restore wheels and wheel covers – and we’ll reward you with uncapped earning potential. We’re hiring now in San Antonio, TX. for a hard-working individual with the skills and outgoing personality to keep things rolling.Working on site at customer locations, you’ll fix cosmetic damages (curb and road rash, peeling, scrapes, gouges, oxidation and bent wheels) using spray-painting equipment, power tools and work aids. The process involves removing the wheels, repairingthem in your mobile truck and placing them back on the vehicle.Tasks include painting surfaces, inspecting wheels, prepping and buffing defects, mixing colors and finishing.The Dent Wizard DifferenceUnlimited, uncapped earning potential based on commission: the harder you work, the more you can makeExcellent benefits, including medical, dental, vision,401(k), paid vacation and moreOutstanding perks, including tools and supplies, company truck, gas card and moreEnvironmentally friendly trucks with explosion-proof filtration and fixtures, outfitted with premixed and pre-matched OEM wheel colorsIndependence to manage your day; no micromanagement Fun and dynamic team where everyone is supportive and has your backVariety of work on many types of cars, both new and old modelsThree weeks of trainingat one of our facilities with Master Wheel Techs to help you learn advanced techniques We pay for the training, pay you a salary while you train and provide travel and lodgingDevelop your technical and customer service skillsonce you are on the job, with assistance from experienced Techs Advancement potential into higher Tech levels (with more $) or management rolesWhat You Need to SucceedAuto painting experience or collision repair technical school training preferred but not requiredVision abilities including close, distance and color vision, depth perception and ability to adjust focusToughness and grit to work outside in all kinds of weatherStrong organizational and communication skills to interact with customers and build accountsManual dexterity for repetitive-motion tasksStrong work ethic, self-motivation and the ability to work independentlyPhysical stamina to kneel, bend, squat and climb, as well as lift up to 45 poundsValid driver’s license and good driving recordThe compensation offered for this position will depend on qualifications, experience, and geographic location. This position is primarily paid on highly incentivized commission structure. The starting compensation is expected to be: $60,000 - $65,000 AnnuallyWe offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). For more information on our benefit offerings, please visit our Dealer Tire Family of Companies Benefits Highlights Booklet.EOE Statement: Dent Wizard is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act*), or any other legally protected status, with respect to employment opportunities.*ADA Disclosure: Any candidate who feels that they may need an accommodation to complete this application, or any portions of same, based on the impact of a disability should contact Dent Wizard's Human Resources Department to discuss your specific needs. Please feel free to contact us at or via phone at .
Full Time
7/24/2024
San Antonio, TX 78205
(3.5 miles)
Overview: With over 150 years of experience, and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. WHY JOIN USWe understand that hiring great people is the foundation of everything we do. Our employee benefits packages include:Competitive pay$10,000 Sign On BonusMedical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K) matchLife insurance, AD&D and long-term disabilityTuition reimbursementOpportunities available nationwideEmployee discounts on vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft Protection Responsibilities: The HVAC Branch Manager leads technicians who install, repair, and maintain HVAC and refrigeration systems for commercial customers. This manager routinely works directly with service and install technicians, dispatch personnel, and other managers to ensure customer satisfaction while meeting departmental goals and objectives. Presenting himself as a senior company representative, the Branch Manager often communicates directly with customers, vendors, and suppliers to ensure accurate communication of job or project status and requirements.Communicates regularly with dispatch to ensure that personnel are being scheduled properly by skill level, efficiency, and training requirements.Communicates daily with dispatch reporting on project information, estimated time to complete jobs, labor hours, and parts or material used.Reviews work orders, invoices, and time reports for accuracy and maintains minimal accounts receivables.Develops and monitors budgets, goals, and objectives to ensure departmental profitability.Maintains communication with vendors and factory personnel concerning warranty issues, product recall notices, operational problems with products, premature failures, and other issues. Qualifications: 5+ years of successful and recent HVAC and Refrigeration service management experienceTwo years of technical training or a bachelor’s degree is preferredAbility to perform advanced-level maintenance and service on HVAC and Refrigeration equipmentSolid working knowledge of Word, Excel, and Outlook and the ability to learn new systemsEPA Universal CertificationValid driver’s licenseProblem-solving and conflict management skillsDetail-oriented and highly organized with the ability to handle multiple tasks and assignmentsAbility to generate ideas and create processes to grow the service departmentRead and interpret documents such as safety rules, operating and maintenance instructions, and procedure manualsAbility to work well with management, executive leadership, support staff, and techniciansAbility and willingness to work a non-standard schedule: nights, weekends, and holidays, as necessary Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.
Full Time
7/16/2024
San Antonio, TX 78251
(8.7 miles)
At SeaWorld, we're passionate about caring for animals. In fact, we've already rescued over 40,000 animals (and counting!). And we can save you from being stuck in just another job. Join us and help bring joy, excitement, and lasting memories to people from around the world. We're seeking enthusiastic, dedicated, and hard-working individuals to become our Ambassadors. Join us and play an important part on our incredible team!What you get to do: Conduct daily ride inspections Perform preventative maintenance and scheduled carpentry services Provide support in troubleshooting and carpentry repairs with rides and facilities. Provide excellent service to guests and team members Consistently practice safe work habits including, but not limited to the use of personal protective equipment, lifting and reporting of unsafe situations What it takes to succeed:Must be at least 18 years of age.Must have a high school diploma or equivalent.Must have extensive knowledge in operation of a wide range of power and hand tools (i.e. table saw, ban saw, panel saw, routers, planers, compound miter saws).Must have at least three (3) years working knowledge in carpentry trade.Must be able to read and understand blueprints.Must have basic math skills.Must have a valid driver's license and the ability to obtain a SEA driver's license.Must be able to quote new projects and work with supply vendors on ordering the correct materials to complete a given project.Must be able to stand and walk for prolonged periods of time in extreme weather conditions. Must be able to walk uphill 35-40 degree slopes and must be able to work on heights above 150 feet. Must be able to frequently lift, push, and pull a minimum of 75 pounds. Must have excellent written and verbal communication skills in the English language.Consistently practices safe work habits including but not limited to the use of personal protective equipment, lifting and reporting of unsafe situations.Must be willing to comply with all SEA grooming guidelines and employment standards.Must be willing to work a flexible schedule that includes weekdays, weekends, evenings, nights and holidays.Compensation: $25.00 PHThe perks of the position:Paid Time OffComplimentary Park Tickets and PassesPark Discounts on Food and MerchandiseMedical, Dental, and Vision Insurance401K Retirement planVoluntary InsuranceLife InsuranceDisability BenefitsTuition ReimbursementDependent and Health Care Flexible Spending AccountsEmployee Assistance ProgramLegal Assistance PlanEEO Employer:SEAWORLD PARKS & ENTERTAINMENT IS AN EQUAL OPPORTUNITY EMPLOYER. ALL APPLICANTS WILL BE CONSIDERED WITHOUT REGARD TO AGE, RACE, COLOR, RELIGION, SEX, NATIONAL ORIGIN, SEXUAL ORIENTATION, PREGNANCY, GENDER IDENTITY OR EXPRESSION, DISABILITY OR COVERED VETERAN STATUS.
Full Time
7/1/2024
San Antonio, TX 78208
(4.4 miles)
AutoReqId: 19988BR Pay Class: Hourly Hourly Pay Rate: 27.92 HR/DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Day ShiftMaintenance Electrician for our Servtex quarry located in New Braunfels, TX . Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a Maintenance Electrician to perform basic corrective, preventive and predictive plant maintenance, and operational field support. Perform electrical repair and maintenance involving disassembly, overhaul, assembly, and adjustments of crushing and screening or mobile equipment componentsPerform electrical repair and maintenance on ready mix concrete and hot mix asphalt plantsMaintain proper tool/parts inventory for specified jobsPerform scale and automation checks for concrete and asphalt plantsProduce accurate estimates and project costsComplete maintenance projects in a timely manner to ensure production goalsMaintain up to date written or data input spreadsheets on all equipment repairsEnsure that all equipment repairs are performed accurately to the manufacturer standardsEnsure compliance with all health, safety, and environmental regulations, as well as company policies and procedures; assist with physical inspections of plant property/departments and immediate reporting of unsafe conditions and/or accidents What We Are Looking For High school diploma or GED requiredCompletion of an apprenticeship program or certification strongly preferredPrefer 2 years prior maintenance experience with an emphasis on electrical workSome welding experience desiredOpen pit mining operations and aggregate products experience a plus.MSHA Part 48 training a plusPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled
Full Time
7/24/2024
San Antonio, TX 78208
(4.4 miles)
**SkillBridge Candidates Only**Build an Aviation Career You're Proud OfAt StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in Aviation. Together, we get the job done and done well. At our new San Antonio Training Center, you will be trained by the world's best. Bring your mechanical aptitude, a strong work-ethic, and a hunger for learning - we'll teach you the rest.What's it like at StandardAeroCollaboration, teamwork, and having each other's backs are the norm here. Our growth in this expanding industry means getting career stability and opportunities to grow. With great resources, an inclusive atmosphere, and a culture based on shared values, we'll support you in building a solid career with a team you can count on.Our Turbine Engine Mechanic Training Program is a 12 week comprehensive paid training program that provides format, structure and standards for employee training & development. We have a 'learn-by-doing' philosophy so you will be frequently moving between theory, lab and instructor led practical on-engine training.Upon completion of the program, you will be assigned to one of our engine programs in San Antonio.What you'll learn:Repair and overhaul of gas turbine engines Inspection of engine modules and engine components Safety practices and aviation regulations Requirements for the ideal candidate include:High School Diploma or equivalent education. Minimum of 2 years job related training/experience is preferred. Ability to read, write, and communicate verbally in English.Ability to read and interpret manuals, technical drawings, and blueprints to determine proper operating conditions. Ability to lift up to 50lbs without assistance.Ability to stand for extended periods of time.Ability to multitask and prioritize tasks in a high pace environment.SkillBridge Specific Information: This is an unpaid fellowship through the Department of Defense (DoD) SkillBridge Program. The fellow selected for this role will not receive compensation or benefits from StandardAero and will not be an employee, agent, or contractor of StandardAero but rather will remain an employee of the DoD and will receive compensation and benefits through the DoD.DoD SkillBridge Eligibility Requirements: Has served at least 180 days on active dutyCan participate within the last 6 months of separation or retirementWill receive an honorable dischargeHas taken any service TAP/TGPSHas attended or participated in an ethics brief within the last 12 monthsReceived Unit Commander (first O-4/Field Grade commander in chain of command) written authorization and approval to participate in DoD SkillBridge Program prior to start of the fellowship.What makes a good fit for StandardAeroWe love people who take pride in their work and being collaborative with their team. We work together and support each other. We're very team oriented too and that is greatly valued. We also believe in getting the job done, whatever it takes and that's a work-ethic that is often hard to describe. We love that too -it's what makes us great partners and teammates to each other. We are respectful of each other and who we are, and welcome people from all walks of life and give everyone open access to learn and build skills. If this sounds like a great fit for you, we hope you apply and join us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to be who you are and experience our welcoming culture.Raising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.
Full Time
7/1/2024
San Antonio, TX 78208
(4.4 miles)
AutoReqId: 19988BR Pay Class: Hourly Hourly Pay Rate: 27.92 HR/DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Day ShiftMaintenance Electrician for our Servtex quarry located in New Braunfels, TX . Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a Maintenance Electrician to perform basic corrective, preventive and predictive plant maintenance, and operational field support. Perform electrical repair and maintenance involving disassembly, overhaul, assembly, and adjustments of crushing and screening or mobile equipment componentsPerform electrical repair and maintenance on ready mix concrete and hot mix asphalt plantsMaintain proper tool/parts inventory for specified jobsPerform scale and automation checks for concrete and asphalt plantsProduce accurate estimates and project costsComplete maintenance projects in a timely manner to ensure production goalsMaintain up to date written or data input spreadsheets on all equipment repairsEnsure that all equipment repairs are performed accurately to the manufacturer standardsEnsure compliance with all health, safety, and environmental regulations, as well as company policies and procedures; assist with physical inspections of plant property/departments and immediate reporting of unsafe conditions and/or accidents What We Are Looking For High school diploma or GED requiredCompletion of an apprenticeship program or certification strongly preferredPrefer 2 years prior maintenance experience with an emphasis on electrical workSome welding experience desiredOpen pit mining operations and aggregate products experience a plus.MSHA Part 48 training a plusPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled
Full Time
7/1/2024
San Antonio, TX 78208
(4.4 miles)
AutoReqId: 19988BR Pay Class: Hourly Hourly Pay Rate: 27.92 HR/DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Day ShiftMaintenance Electrician for our Servtex quarry located in New Braunfels, TX . Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a Maintenance Electrician to perform basic corrective, preventive and predictive plant maintenance, and operational field support. Perform electrical repair and maintenance involving disassembly, overhaul, assembly, and adjustments of crushing and screening or mobile equipment componentsPerform electrical repair and maintenance on ready mix concrete and hot mix asphalt plantsMaintain proper tool/parts inventory for specified jobsPerform scale and automation checks for concrete and asphalt plantsProduce accurate estimates and project costsComplete maintenance projects in a timely manner to ensure production goalsMaintain up to date written or data input spreadsheets on all equipment repairsEnsure that all equipment repairs are performed accurately to the manufacturer standardsEnsure compliance with all health, safety, and environmental regulations, as well as company policies and procedures; assist with physical inspections of plant property/departments and immediate reporting of unsafe conditions and/or accidents What We Are Looking For High school diploma or GED requiredCompletion of an apprenticeship program or certification strongly preferredPrefer 2 years prior maintenance experience with an emphasis on electrical workSome welding experience desiredOpen pit mining operations and aggregate products experience a plus.MSHA Part 48 training a plusPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled
Full Time
7/1/2024
San Antonio, TX 78208
(4.4 miles)
AutoReqId: 19988BR Pay Class: Hourly Hourly Pay Rate: 27.92 HR/DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Day ShiftMaintenance Electrician for our Servtex quarry located in New Braunfels, TX . Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a Maintenance Electrician to perform basic corrective, preventive and predictive plant maintenance, and operational field support. Perform electrical repair and maintenance involving disassembly, overhaul, assembly, and adjustments of crushing and screening or mobile equipment componentsPerform electrical repair and maintenance on ready mix concrete and hot mix asphalt plantsMaintain proper tool/parts inventory for specified jobsPerform scale and automation checks for concrete and asphalt plantsProduce accurate estimates and project costsComplete maintenance projects in a timely manner to ensure production goalsMaintain up to date written or data input spreadsheets on all equipment repairsEnsure that all equipment repairs are performed accurately to the manufacturer standardsEnsure compliance with all health, safety, and environmental regulations, as well as company policies and procedures; assist with physical inspections of plant property/departments and immediate reporting of unsafe conditions and/or accidents What We Are Looking For High school diploma or GED requiredCompletion of an apprenticeship program or certification strongly preferredPrefer 2 years prior maintenance experience with an emphasis on electrical workSome welding experience desiredOpen pit mining operations and aggregate products experience a plus.MSHA Part 48 training a plusPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled
This website uses cookies for analytics and to function properly. By using our site, you agree to these terms.