Overview: Driver's Edge Auto Repair has delivered fast and easy service for over 10 years. We proudly serve the greater Dallas & Fort Worth areas and provide great service on an array of automotive services, optimizing performance utilizing proven processes inside of a systematic approach to automotive repair.The Senior Automotive Technician is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturer's, and company repair standards. Compensation: $25.00/Hr. to $35.00/Hr. flag rate Principal Duties and Responsibilities : Diagnoses vehicles according to the appropriate level of certifications/experience. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy Performs complex and heavy-duty repairs Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file Follows all safety procedures and reports any concerns to direct supervisor Ability to work flexible schedules, including weekends as needed. Other duties as assigned by direct supervisor Adheres to Sun Auto's core values, all company policies and procedures as outlined in the Employee Handbook Qualifications : Previous automotive technician / mechanic experience required ASE certifications in lieu of experience Ability to demonstrate proper use of computerized equipment for diagnostics Valid Driver's license in the work State (out-of-state driver's licenses must be transferred to work state within 30 days of hire) Possess State Inspector License or ability to obtain a State Inspector license (in applicable locations) within 30 days of hire date High School Diploma or equivalent; Technical School experience preferred Working Conditions and Physical Demands : The Senior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions. The Senior Automotive Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently. Communicate with customers and shop personnel Vision sufficient to detect color, depth, and re-focus Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#bayard

Overview: Join our team of passionate automotive technicians, where your skills are not only valued but also cultivated for long-term growth. Here's why AutoNation is the ultimate destination for automotive professionals:Paid Training Opportunities: Elevate your expertise with paid training, unlocking new levels of success and earning potential on our technician wage grid.Generous PTO/Vacation Policy: Enjoy a comprehensive paid time off policy for a healthy work-life balance.Defined Career Paths: Experience a workplace with structured career paths, offering clear milestones and opportunities for advancement.Comprehensive Health Insurance Options: AutoNation prioritizes your well-being with robust health insurance options for you and your loved ones.Drive a Strong Customer Pay Business: Join a team focused on driving a strong customer pay business where your expertise contributes to exceptional customer experiences.Are you ready to transform your job into a thriving automotive career With over 250 locations coast to coast, at AutoNation we don't just offer employment; we craft pathways for your success. Ready to accelerate your career Apply now and be part of a dynamic team that's driving success on and off the road!Position Overview:At AutoNation, getting customers back on the road is what drives us. We’re looking for a Collision Body Technician or Auto Body Technician to join our team. As a Collision Body Technician, you’ll perform vehicle repairs as assigned in accordance with dealer and factory standards. Your attention to detail make you a valuable asset to the team as you ensure repairs are completed on time, and deliver top-notch work to delight our customers.What are the daily job responsibilities Performing work as outlined on repair orders with efficiency and accuracy. Communicating with Estimators and Parts Associates to obtain necessary parts. Assessing vehicle condition to determine if additional safety or repair work is needed. Performing all body repairs according to estimate. Performing welding, soldering, body alignment, and frame/unibody repairs. Operating all equipment in the Collision Center in a safe and productive manner, following AutoNation’s Safety Standards for the use of personal protective equipment (e.g., safety glasses, gloves, hearing protection) while working on the production floor.Inspecting all work performed as a Quality Control (QC) measure as soon as jobs are completed. Mixing all chemicals according to manufacturer directions/specifications. Understanding and following federal, state, and local regulations that affect Collision Center operations, such as hazardous waste disposal, OSHA guidelines, etc. Gaining superior product knowledge to provide high quality repairs.What are the requirements for the Collision Body Technician ICAR certification (preferred) or interest to become certified.OEM certification (preferred) or interest to become certified.At least two years’ automotive experience. Must have a valid, in-state driver’s license with an acceptable, safe driving record. Ability to operate an automobile.What are the opportunities for career growth Our Associates have many choices for career growth and development after success in a Collision Body Technician role.Future opportunities may include:Collision DirectorCollision Production ManagerCollision EstimatorCollision Body Team LeadThe intent of this job description is to provide a representative summary of the major duties and responsibilities performed by incumbents of this job. Incumbents may be requested to perform job related tasks other than those specifically presented. Career opportunities are dependent on business and staffing needs, as well as the qualifications of internal and external candidates. Company OverviewAutoNation, a provider of personalized transportation services, is driven by innovation and transformation. As one of America's most admired companies, AutoNation delivers a peerless Customer experience recognized by data-driven consumer insight leaders, Reputation and J.D. Power. Through its bold leadership and brand affinity, the AutoNation Brand is synonymous with "DRVPNK" and "What Drives You, Drives Us." AutoNation has a singular focus on personalized transportation services that are easy, transparent, and Customer-centric.BenefitsClick here to learn more about our Benefits.Join us as we pave the way to moving our company, our communities and our industry forward. Apply today at a location near you or wherever you dream the road will take you.AutoNation is an equal opportunity employer and a drug-free workplace.

Overview: Join our team of passionate automotive technicians, where your skills are not only valued but also cultivated for long-term growth. Here's why AutoNation is the ultimate destination for automotive professionals:Paid Training Opportunities: Elevate your expertise with paid training, unlocking new levels of success and earning potential on our technician wage grid.Generous PTO/Vacation Policy: Enjoy a comprehensive paid time off policy for a healthy work-life balance.Defined Career Paths: Experience a workplace with structured career paths, offering clear milestones and opportunities for advancement.Comprehensive Health Insurance Options: AutoNation prioritizes your well-being with robust health insurance options for you and your loved ones.Drive a Strong Customer Pay Business: Join a team focused on driving a strong customer pay business where your expertise contributes to exceptional customer experiences.Are you ready to transform your job into a thriving automotive career With over 250 locations coast to coast, at AutoNation we don't just offer employment; we craft pathways for your success. Ready to accelerate your career Apply now and be part of a dynamic team that's driving success on and off the road!Position Overview:At AutoNation, getting customers back on the road is what drives us. We’re looking for a Collision Body Technician or Auto Body Technician to join our team. As a Collision Body Technician, you’ll perform vehicle repairs as assigned in accordance with dealer and factory standards. Your attention to detail make you a valuable asset to the team as you ensure repairs are completed on time, and deliver top-notch work to delight our customers.What are the daily job responsibilities Performing work as outlined on repair orders with efficiency and accuracy. Communicating with Estimators and Parts Associates to obtain necessary parts. Assessing vehicle condition to determine if additional safety or repair work is needed. Performing all body repairs according to estimate. Performing welding, soldering, body alignment, and frame/unibody repairs. Operating all equipment in the Collision Center in a safe and productive manner, following AutoNation’s Safety Standards for the use of personal protective equipment (e.g., safety glasses, gloves, hearing protection) while working on the production floor.Inspecting all work performed as a Quality Control (QC) measure as soon as jobs are completed. Mixing all chemicals according to manufacturer directions/specifications. Understanding and following federal, state, and local regulations that affect Collision Center operations, such as hazardous waste disposal, OSHA guidelines, etc. Gaining superior product knowledge to provide high quality repairs.What are the requirements for the Collision Body Technician ICAR certification (preferred) or interest to become certified.OEM certification (preferred) or interest to become certified.At least two years’ automotive experience. Must have a valid, in-state driver’s license with an acceptable, safe driving record. Ability to operate an automobile.What are the opportunities for career growth Our Associates have many choices for career growth and development after success in a Collision Body Technician role.Future opportunities may include:Collision DirectorCollision Production ManagerCollision EstimatorCollision Body Team LeadThe intent of this job description is to provide a representative summary of the major duties and responsibilities performed by incumbents of this job. Incumbents may be requested to perform job related tasks other than those specifically presented. Career opportunities are dependent on business and staffing needs, as well as the qualifications of internal and external candidates. Company OverviewAutoNation, a provider of personalized transportation services, is driven by innovation and transformation. As one of America's most admired companies, AutoNation delivers a peerless Customer experience recognized by data-driven consumer insight leaders, Reputation and J.D. Power. Through its bold leadership and brand affinity, the AutoNation Brand is synonymous with "DRVPNK" and "What Drives You, Drives Us." AutoNation has a singular focus on personalized transportation services that are easy, transparent, and Customer-centric.BenefitsClick here to learn more about our Benefits.Join us as we pave the way to moving our company, our communities and our industry forward. Apply today at a location near you or wherever you dream the road will take you.AutoNation is an equal opportunity employer and a drug-free workplace.

Overview: OVERVIEWEnjoy top hourly pay plus a competitive bonus plan, a four-day workweek, and a great benefits package (medical, dental, & vision, PTO, and 401k).Our Mobile Automotive Technicians enjoy a fully equipped, company provided van with state-of-the-art tools, company iPhone with access to resources like Mitchell Pro-Demand, as well as a growing client base that comes from being part of one of U.S. News’ Best Companies to Work For.You can grow and advance your career through on-the-job training and paid training opportunities. In addition, AutoNation Mobile Service is part of AutoNation which allows our mobile technicians incredible growth opportunities throughout the United States. AutoNation Mobile Service is fast-growing and now is the right time to get in!Our Technicians are paid based on an industry-leading technician wage grid that provides a pay range from $22.00 to $37.00 an hour, based on a combination of experience and certifications.WE WILL DEPEND ON THIS PERSON TO Perform vehicle repairs within regular scope of work (excluding tasks such as steering rack, fuel tank, engine teardown)Diagnose and assess circumstance and situation, depending on scope of work, either perform repair or sublet repair to partner shopsDiagnose and repair vehicles to ensure customer needs are metProvide labor and time estimates for additional automotive repairsEncourage customers to schedule recommended work with fact-based selling and automotive expertiseBe part of a team that cares about customers and their carsWork as part of a team to solve technical problems quickly and effectivelyPerforms other duties as requested by managerMust be able to remain in a stationary position for 50% of the timeMust have the ability to lift up to 50 poundsYOU SHOULD HAVEMinimum of 7 years of recent professional automotive repair experienceMaster level ASE certification or equivalentKnowledge in working and using repair shop software (All Data, Mitchell 1, etc.)Valid driver's license (clean background)Pass a pre-employment drug screenA desire to provide an extraordinary customer experienceComfortable working in varying environmentsSpeaking and writing in English is required, Spanish is a plusHigh school diploma or the equivalentWORKING WITH USFlexible Schedule: 4 days on, 3 days off every week!Competitive Pay (DOE)Paid vacation timeMedical, dental, and vision insuranceDOT Prerequisites: Employment will be contingent upon the successful completion of all prerequisites required by the U.S. Department of Transportation (DOT) / Federal Motor Carrier Safety Administration (FMCSA) regulations, including a physical and medical certification. Company OverviewAutoNation, a provider of personalized transportation services, is driven by innovation and transformation. As one of America's most admired companies, AutoNation delivers a peerless Customer experience recognized by data-driven consumer insight leaders, Reputation and J.D. Power. Through its bold leadership and brand affinity, the AutoNation Brand is synonymous with "DRVPNK" and "What Drives You, Drives Us." AutoNation has a singular focus on personalized transportation services that are easy, transparent, and Customer-centric.BenefitsClick here to learn more about our Benefits.Join us as we pave the way to moving our company, our communities and our industry forward. Apply today at a location near you or wherever you dream the road will take you.AutoNation is an equal opportunity employer and a drug-free workplace.

Req ID:438481Address: 34353 LBJ FWY Dallas, TX, 75241Benefits: * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Company: Gerber Collision & GlassWELCOME TO GERBER COLLISION & GLASSOur Team Members Drive Us! Gerber Collision & Glass is one of the largest collision repair companies in North America. With $2+ billion in sales, over 800 locations and growing, our 10,000+ team members across the United States and Canada are passionate about delivering our goal to WOW Every Customer and Be the Best!We invite you to join our team. Gerber offers a great place to launch and grow careers. As we continue to grow, we have endless opportunities for you to grow with us.Gerber Collision & Glass recognizes, values and welcomes all applicants with unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans.Job Description:WELCOME TOGERBER COLLISION & GLASS- NORTH TX MARKET, CURRENTLY HIRING AT:The Colony, CARROLLTON, & DENTON TX LOCATIONS.Pay ranges starting from $90,000 to $140,000 +depending on experience and location*OUR SHOPS IN NORTH TEXAS DALLAS AREA IN DENTON & CARROLLTON WANT TO TALK TO YOU ABOUT YOUR FUTURES WITH GERBER!*GOT QUESTIONS; TEXT KANDY: HR | Regional Recruiting Manager | LA/TX*$$ EMPLOYEE REFERRAL BONUS'S FOR GENERAL MGR’S, ESTIMATORS, & BODY TECHNICIANS (BRING YOUR PEERS w/YOU AND GET AN ADDED BONUS)$$*The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.#ABTSOUTHBenefits That Drive Your SuccessGerber offers the comprehensive benefits you expect from an industry leader, including:Competitive Pay PlansMedical, Prescription Drug, Dental & Vision Insurance401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsurancePaid Vacation & HolidaysContinuing Education OpportunitiesGerber Collision & Glass is proud to be an equal opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.About UsGerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit gerbercareers.com to learn more about our company.

Overview: Driver's Edge Auto Repair has delivered fast and easy service for over 10 years. We proudly serve the greater Dallas & Fort Worth areas and provide great service on an array of automotive services, optimizing performance utilizing proven processes inside of a systematic approach to automotive repair.The General Service Technician/ State Inspector will perform non-technical service repairs such as oil changes, tire and wheel related services, alignments, flushes, and more. While working alongside ASE Certified Automotive Technicians, you will get the training necessary to get to the next level in your career. If you are interested in becoming a certified ASE Automotive Technician, this is the opportunity for you. This could be the beginning of your successful career. Starting at: $13.00/Hr. to $16.00/Hr. Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities : Performs tire mounting/dismounting, wheel balance and tire rotation. Performs oil changes and other basic services Utilizes the company's Multi-point Inspection and/or Repair Order to properly document the vehicle condition Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance Requires driving vehicles in a safe and courteous manner obeying all traffic laws Includes transporting customers, picking up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle Conducts State Safety and Emission Inspections (in applicable locations) on vehicles in an ethical manner following all company and state guidelines Follows all safety procedures and reports any concerns to direct supervisor Ability to work flexible schedules, including weekends as needed. Other duties as assigned by direct supervisor Adheres to Sun Auto's core values, and all company policies and procedures as outlined in the Sun Auto Tire & Service Employee Handbook Qualifications : Possesses a general understanding of under the hood, mechanical and under carriage assemblies is preferred Valid Driver's license in the work State Ability to obtain a State Inspector License is preferred High School Diploma or equivalent preferred Working Conditions and Physical Demands : The General Service Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions .The General Service Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently. Communicate with customers and shop personnel Vision sufficient to detect color, depth, and re-focus Previous automotive experience preferred, but we will consider energetic and hard-working individuals with a passion for cars. Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there is ALWAYS something to do. Must possess a valid driver's license and be able to pass a pre-employment drug test, MVR, and criminal background check.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#bayard

Pay: $21.50 per hourThe Engineer 2 oversees the day to day engineering operations in the lodge. This includes but is not limited to project management, general life safety, ordering, working with vendors. Responsible for completing preventative maintenance and repairs through-out the hotel guestrooms, public spaces, equipment, buildings & grounds.Responsibilities:Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items.Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards.Ensures that all work performed is conducted in a safe and timely manner adhering to standards of safety and effective equipment utilization.Maintains working knowledge of departmental safety procedures. Attends safety-training programs and in-service as required for continued development.Maintains the necessary service records on mechanical and structural systems.Ensure all standard operating procedures are followed for park operation, employee relations, timekeeping and safety. Including ensuring all daily, weekly and monthly documentation is being completed.Other duties as deemed appropriate by the Assistant Director of Engineering.Qualifications:Technical DegreeTechnical TrainingTrade Related CertificationsHospitality, Healthcare or related industry experienceTrade related certifications preferred in HVAC and/or ElectricalMove, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Ability to complete work at heights up to 50 feet using ladders, harnesses and lifts.Computer skills including knowledge of database software, internet software, order processing systems, Microsoft Office suite.Valid Driver’s License

StandardAero is one of the largest independent maintenance, repair, and overhaul providers in the aerospace industry. At our plants, our units engage in a variety of work scopes involving trouble-shooting, problem solving, and working together to embody our #1 priority, which is ensuring the safety of our people and our product.At StandardAero, we offer:A clean, safe, and temperature-controlled work environment.Competitive compensation structures and a total rewards package.An opportunity to work with a variety of aircraft engines.A variety of shifts and hours.Opportunities for horizontal and vertical movement within the organization.DETAIL INSPECTORBuild an Aviation Career You're Proud OfYour work ties us all together, helping our teams function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks.Work with the latest technologies and techniques in the aviation industry to source materials, manage inventory, and coordinate logistics. You'll ensure we have what we need to service our customers.As an Engine Detail Inspector you will perform visual and dimensional inspection on engines, accessories and related components and parts to determine their condition for return to service in accordance with approved data and customer requirements. Cross trains in other complementary skills as needed to support production requirements.What you'll do:Performs visual and dimensional inspection of products being processed for repair or overhaul to verify their conformance to the approved data and customer requirements.Determines and documents the modification status/configuration of products being processed for repair or overhaul to verify compliance to the applicable regulatory and customer requirements.Ensures the products to be inspected are sufficiently clean and in acceptable condition to perform the inspections necessary to complete the work instruction.Determines the repairability of those products not meeting the applicable requirements.Records the inspection results on the appropriate inspection documentation.Generates an estimate on the cost of replacement parts and labor necessary to complete the applicable work instructions.Generates the applicable documentation for the repair of unserviceable products.Inspects and identifies parts in the Reduced to Parts (RTP) process.Performs the necessary physical inspection of parts in the Check for Acceptance (C for A) process.Participates in continuous improvement of cell processes.Cross trains in other complementary skills and seeks endorsements for those skills as needed to support production requirements.Moves between production assignments that utilize multiple skills as needed to support production requirements.Participates in the cross training of other technicians as needed to support production requirements.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carries out other duties as assigned.Position Requirements:Knowledgeable and proficient in the proper use of precision measuring equipment.Ability to read, understand and interpret blueprints.Knowledgeable in and ability to identify and interpret conditions on products that are the result of service operation.Ability to use and interpret publications used in the production process (graphs, charts, schematics, blueprints).Working knowledge of the functions and operation of the products being inspected.Proficient in technical writing.Preferred Characteristics:Working knowledge of production management computer system and other related internal control systems.Ability to complete the Detail Inspector Training & Development Plan.Ability to lift up to 25 pounds (unassisted) for approximately 25% of the average work day.Regularly required to sit for prolonged periods.Ability to work day shift, evening shift, or weekend shift, as required.Must be authorized to work in the US.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Description IntroductionDo you want to be appreciated daily Our nurses are celebrated for being on the front line, empathetic for patients. At Medical City Dallas our nurses set us apart from any other healthcare provider. We are seeking a(an) RN CNC Neurology to join our healthcare family.BenefitsMedical City Dallas, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include:Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation.Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more.Free counseling services and resources for emotional, physical and financial wellbeing401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service)Employee Stock Purchase Plan with 10% off HCA Healthcare stockFamily support through fertility and family building benefits with Progyny and adoption assistance.Referral services for child, elder and pet care, home and auto repair, event planning and moreConsumer discounts through Abenity and Consumer DiscountsRetirement readiness, rollover assistance services and preferred banking partnershipsEducation assistance (tuition, student loan, certification support, dependent scholarships)Colleague recognition programTime Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence)Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income.Learn more about Employee BenefitsNote: Eligibility for benefits may vary by location.At Medical City Dallas, our nurses play a vital part. We know that every nurse’s path and purpose is unique. Do you want to create your own personal career path in nursing HCA Healthcare is your career destination! Our scale makes it possible for nurses to create the career path that fits their life – for life – and empowers their passion for patient care. Apply today for our RN CNC Neurology opportunity.Job Summary and QualificationsThe Clinical Nurse Coordinator (CNC) ensures and delivers high quality, patient-centered care and coordination of all functions in the unit/department during the designated shift. In collaboration with other members of the management team, the CNC directs, monitors, and evaluates nursing care in accordance with established policies/procedures, serves as a resource person for staff, and models a commitment to the organization’s vision/mission/values to support an unparalleled patient experience and clinical outcomes that contribute to overall departmental performance.What you will do in this role:Assists with admission and discharge processes to ensure efficient throughput and high quality, patient-centered care.Participates in the ongoing assessment of the quality of patient care services provided in the unit, in collaboration with other members of the management team.Collaborates with subject matter experts and other managers to create an environment of teamwork that supports improved outcomes and service.Supports a patient-first philosophy and engages in service recovery when necessary.Supports the efforts of the facility to improve engagement by operationalizing current nursing strategies, including employee rounding, hourly rounds, and other initiatives. Provides recommendations related to interviewing, selecting, and training new staff. Recommends and implements courses of action, including training and development, conflict resolution, personnel policy compliance, completion of performance evaluations, and/or disciplinary actions to ensure a competitively better organization.Assists with staff scheduling. Manages all practical aspects of staff labor in accordance with patient care needs and established productivity guidelines.Supports proper inventory control and assists with managing supplies and equipment.What qualifications you will need:Basic Cardiac Life Support RequiredRegistered Nurse in TX or holds a compact licenseBachelors Degree or ADN Required in Nursing1-2 years Recent experience working in a Hospital SettingMedical City Dallas is recognized for its advanced medical facilities and commitment to excellence in patient care. We are an 895+ bed tertiary care center. Our medical team consists of more than 1,500 physicians, many are recognized as the world's best in their specialties. Patients travel to Medical City Dallas from all over the United States and from other countries. We offer sophisticated treatment by our 400+ in-house physician specialists. Medical City Dallas has a full-service adult hospital and pediatric hospital. We have separate adult and pediatric emergency rooms, outpatient clinics and diagnostic centers. Our providers have access to state-of-the-art technology and are pioneering new medical procedures to accommodate patient needs. As a part of the Medical City network of hospitals, patients are ensured access to leading medical experts and advanced healthcare innovations across the network.HCA Healthcare has been recognized as one of the World's Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses."The great hospitals will always put the patient and the patient's family first, and the really great institutions will provide care with warmth, compassion, and dignity for the individual."- Dr. Thomas Frist, Sr.HCA Healthcare Co-Founder Join a family that cares about every stage in your career! We are interviewing candidates for our RN CNC Neurology opening. Apply today and a member of our Talent Acquisition team will reach out.We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Seasonal Service Professional About Hawx Hawx Pest Control is a technology-driven company that is revolutionizing the pest management industry. Hawx serves a crucial public health function by using state-of-the-art equipment and environmentally conscious products to protect the people and places our customers love. At Hawx we pride ourselves on our internal company culture. Our team members benefit from being part of a company that actively rewards employees for being team players while providing ample opportunity for personal and professional growth. We understand how important it is to recruit and reward people who are enthusiastic about developing their careers and opening new opportunities while delivering a best-in-class customer experience. Job Summary We are seeking to hire a talented Seasonal Service Professional who will inspect and perform pest control treatments for residential and commercial customers using high quality and environmentally responsible products. DETAILS $18 - $20 per hourFull-time positionWork travel required Responsibilities Perform efficient routes individually.Enter and exit structures, crawl spaces and climb on top of structures. Address and alleviate customer concerns and pest related issues by using integrated pest management strategiesMaintain and care for company equipment, vehicle and gas card and other job-related items.Complete all duties required by a pest/mosquito/termite service professional: customer consultation, inspection, eliminate/identify conducive conditions and proper treatments. Record work activities and complete all paperwork after finishing services.Exemplify safe performance of job duties and adherence to safety policies and procedures. Qualifications TRAITS Reliable: Establishes and upholds our company culture and values. Believes in the company mission and the Hawx culture of excellence. Shows up on time and gets the job done. Stays on top of tasks and manages time and responsibilities well. People Person: Keeps things positive and gets energy from people. Adaptable and flexible while working with different personality styles. Develops strong working relationships with frontline team members. Enjoys working cross-functionally with Sales teams and knows how to relate to and work with them. SKILLS Top Performance: Sets the bar for the team in service quality and route efficiency.Effective Communication: Works well with team members of any skill level to level up their performance and has the ability to onboard and train new hires.Technical Expertise: Has a solid understanding of the pest control field and the technical aspects of the job being performed by frontline employees. Service Professionals must understand protocols, application techniques, products, equipment and other tools that are used on a day to day basis so they can train and coach to a high standard. EXPERIENCE & OTHER REQUIREMENTS Pest management experience, preferably in a residential market, with responsibilities related to coaching and developing frontline team members.Must have and maintain any required state licenses/certifications.Must be 21 years or older with a valid driver's license.Must pass required background check and drug screening.Hawx Services, LLC is an Equal Opportunity Employer committed to fostering an inclusive work environment with the most qualified employees. Both in our hiring process and in the experiences that our team members have as employees, Hawx is committed to diversity, equity, and inclusion. Accordingly, Hawx is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, sexual orientation, age, marital status, disability, gender identity, or veteran status.

Overview: Driver's Edge Auto Repair has delivered fast and easy service for over 10 years. We proudly serve the greater Dallas & Fort Worth areas and provide great service on an array of automotive services, optimizing performance utilizing proven processes inside of a systematic approach to automotive repair.The General Service Technician will perform non-technical service repairs such as oil changes, tire and wheel related services, alignments, flushes, and more. While working alongside ASE Certified Automotive Technicians, you will get the training necessary to get to the next level in your career. If you are interested in becoming a certified ASE Automotive Technician, this is the opportunity for you. This could be the beginning of your successful career. Starting at: $13.00/Hr. to $17.00/Hr. Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities : Performs tire mounting/dismounting, wheel balance and tire rotation. Performs oil changes and other basic services Utilizes the company's Multi-point Inspection and/or Repair Order to properly document the vehicle condition Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance Requires driving vehicles in a safe and courteous manner obeying all traffic laws Includes transporting customers, picking up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle Conducts State Safety and Emission Inspections (in applicable locations) on vehicles in an ethical manner following all company and state guidelines Follows all safety procedures and reports any concerns to direct supervisor Ability to work flexible schedules, including weekends as needed. Other duties as assigned by direct supervisor Adheres to Sun Auto's core values, and all company policies and procedures as outlined in the Sun Auto Tire & Service Employee Handbook Qualifications : Possesses a general understanding of under the hood, mechanical and under carriage assemblies is preferred Valid Driver's license in the work State Ability to obtain a State Inspector License is preferred High School Diploma or equivalent preferred Working Conditions and Physical Demands : The General Service Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions .The General Service Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently. Communicate with customers and shop personnel Vision sufficient to detect color, depth, and re-focus Previous automotive experience preferred, but we will consider energetic and hard-working individuals with a passion for cars. Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there is ALWAYS something to do. Must possess a valid driver's license and be able to pass a pre-employment drug test, MVR, and criminal background check.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#bayard

Overview: Driver's Edge Auto Repair has delivered fast and easy service for over 10 years. We proudly serve the greater Dallas & Fort Worth areas and provide great service on an array of automotive services, optimizing performance utilizing proven processes inside of a systematic approach to automotive repair.The Junior Automotive Technician is responsible for conducting basic automotive diagnostic and repair such as oil changes, tire and wheel related services and light vehicle maintenance. They are also responsible for effectively repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Driver's Edge & Service standards.Starting at: $25.00/Hr. to $35.00/Hr. Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities : Performs basic mechanical repairs based on level of experience Performs tire mounting/dismounting, wheel balance and tire rotation. Performs oil changes, fluid changes and power flushes and other basic services. Utilizes the company's Multi-point Inspection and/or Repair Order to properly document the vehicle condition Conducts State Safety and Emission Inspections (in applicable locations) on vehicles in an ethical manner following all company and state guidelines Follows all safety procedures and reports any concerns to direct supervisor Ability to work flexible schedules, including weekends as needed. Other duties as assigned by direct supervisor Adheres to Sun Auto's core values, and all company policies and procedures as outlined in the Sun Auto Tire & Service Employee Handbook Qualifications : Previous automotive technician / mechanic experience preferred Ability to demonstrate proper use of computerized equipment for diagnostics Valid Driver's license in the work State (out-of-state driver's licenses must be transferred to work state within 30 days of hire) Ability to obtain a State Inspector License (in applicable locations) is preferred High School Diploma or equivalent preferred Working Conditions and Physical Demands : The Junior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions . The Junior Automotive Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently. Communicate with customers and shop personnel Vision sufficient to detect color, depth, and re-focus Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#bayard

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offerCompetitive payPaid vacation, holidays, and sick timeComprehensive benefits package, including 401K, medical, dental, and vision care - available from day oneExtensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCompany vehicle, tools, and equipment provided to complete all jobsScheduling and management supportJCI Employee discount programs (The Loop by Perk Spot)What you will doService and troubleshoot wet/dry/ pre-action systems, fire pumps-based fire sprinkler systems, and backflows, including repair and internal inspections of systems.Follow verbal and written instructions, read and understand complex construction blueprints, diagrams, and specifications used in installation activities.Carry/move equipment and tools weighing up to 60 pounds. Perform work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet or more.Maintain a clean and safe work area. Pick up and properly dispose of all trash associated with Johnson Controls Fire Protection work. Wear appropriate safety equipment as required including bump cap/hard hat, safety glasses, cut-resistant gloves, face masks and safety-toed boots.Make sure to properly secure all Johnson Controls Fire Protection tools and equipment at the end of each work period so as to prevent damage or loss.Have computer/phone skills - Word, Excel, Outlook and IPhone apps and functionsComplete and submit time reports and other documents as required.Bring to the immediate attention of the dispatcher/supervisor of all changes, discrepancies and coordination problems that impair activities or schedules.Working alternate shifts or weekends to meet customer service on call requirements is required.Perform other duties as directed.What we look forRequiredHigh School Diploma, or equivalentWorking knowledge of wet, dry, and pre-action sprinkler systems, and fire pump systems a mustMust have a clean driving recordFollow verbal and written instructions3-5 years of experience in the industryPreferredSprinkler and Backflow license is plus or must be obtainedNICET is a plusJCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide.#LI-OnsiteJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

$27.00/hourShift Premium may ApplyImmediately hiring! Are you a diligent and meticulous individual with expertise in automotive repair If you have experience working in an auto garage or car dealership, we want you to join the Avis Budget Group enterprise! What You'll Do: You'll perform standard and complex repairs, including warranty, on a wide variety of auto makes and models with no technical supervision, including the diagnosis and repair of engines, transmissions, exhaust, brakes, electrical, air conditioning and computer systems. You may also act as a technical expert to other technicians in the shop. Perks You'll Get: Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training in our vehicle makes and modelsPaid time offMedical, d ental and o ther i nsuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License Minimum 3 years of auto repair experience, holding 3 ASE (ability to acquire 2 additional ASE certificates within first year)Knowledgeable in the following areas covered by the ASE certification programs, including but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning and Engine Performance, Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United States Previous Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are : Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate . The fine print: Avis Budget Group is an equal opportunity employer - M/F/Veterans/Disabled . This role requires the ability to lift up to 50 pounds, continuously stand, walk, sit and kneel frequently, and enter and exit vehicles. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of Avis Budget Group. Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. DallasTexasUnited States of America

MAINTENANCE TECHNICIAN - CORRUGATED INDUSTRY 1800 E Plano Pkwy, Plano, TX 75074, USAReq #9664 Wednesday, March 6, 2024 As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers large and small package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People • Customers • Trust Pay and BenefitsPay Range from $27.04 - $34.61 based on skills and experience.Excellent Benefits Package including Health, Dental, Vision, and 401K Plan.1.5 pay over 8 hours or over 40 hours.1.5 pay on holidays, plus additional overtime over 8 hours on holidays.Uniforms provided.Up to 100 paid training hours annually for technicians to advance through the progressive skill levels.Stipend for safety shoes and safety glasses.RESPONSIBILITIES:Perform a variety of maintenance tasks to diagnose, repair, rebuild, replace mechanical, electrical, PLC, hydraulic and pneumatic systems on all plant equipment and facilities.Use maintenance knowledge to increase productivity, decrease downtime and waste.Work with a sense of urgency to respond to machine downtime events.Will be required to complete in-house training programs to develop equipment specific maintenance skills.The position may also require attendance at external training that may require occasional overnight travel.Must be able to follow all safety and company policies, including lock-out tag-out procedures.BASIC QUALIFICATIONS:At least 2 years of experience successfully troubleshooting and repairing industrial manufacturing equipment in the corrugated packaging industry.Must have knowledge and experience with repairing and maintaining mechanical, electrical, hydraulic, pneumatic, PLC systems and industrial equipment.Be passionate about maintaining a safe and clean work environment.Ability to work any shift, overtime, and weekends as needed.Must have own basic tools (PCA will provide specialized tools).Must be authorized to work in the U.S.PREFERRED QUALIFICATIONS:Technical degree and/or 5 years of experience in successfully troubleshooting and repairing industrial machinery and equipment within the corrugated packaging industry.KNOWLEDGE, SKILLS & ABILITIES:Excellent communication skills.Basic computer skills.Ability to work in a fast-paced environment. All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories. Other details Pay TypeHourlyMin Hiring Rate$27.04Max Hiring Rate$34.61

Priv is the leading on-demand beauty and wellness service app that delivers professionals straight to our client’s door for hairstyling, makeup, massage, nail, facial, spray tan, ear piercing, and fitness services. We currently serve 30+ markets in the United States! We are seeking talented and professional Makeup Artists to join our community of freelance pros in your area. Be a part of our loyal team of professionals, committed to transforming the beauty and wellness industry by delivering clients a luxury experience anywhere, anytime. We work with YOUR availability; you never have to take an appointment that doesn't fit into your busy life. Earn additional income doing what you love and meeting new clients! Why Priv “I've been with Priv for 4 years and love the team, flexibility and company. Would never work anywhere else!” - Prv Professional Be an independent contractor and work when and where you wantHave the freedom to work for other apps or salonsPriv is a one-stop-shop to offer all of your services We offer competitive rates and compensation Attend professional development workshops to help you grow in the industry Build lasting relationships with clients and other beauty and wellness professionals Participate in industry level events, premiers, trade shows, and fashion shows Pay: $70 - $100 per hour https://gopriv.com/

Make every paint job a masterpiece. Be a wizard.Now paying a $2,500 Sign on Bonus! As a Paint Tech with Dent Wizard, you'll have unlimited earning potential and the ability to control your day as you deliver fast, flawless paint jobs that dazzle. We're hiring right now for a Paint Technician in Dallas, TX.Utilizing specific surface preparation, the latest spray equipment and proven painting techniques, you will inspect, prepare, blend and finish vehicle surfaces. Working at locations that may include automotive dealerships, rental agencies and auto auctions, you'll do everything from simple touch-ups to repairing paint damage.The Dent Wizard Difference Unlimited, uncapped earning potential based on commission: the harder you work, the more you can makeExcellent benefits, including medical, dental, vision, 401(k), paid vacation and moreOutstanding perks, including mobile phone, company vehicle, gas card and moreWe will fully equip you with the most current tools and supplies Independence to manage your day; no micromanagementGreat work/life balance that puts you in charge of your scheduleOn-the-job training in our computerized color matching systems and painting techniques from experienced paintersCertifications and advanced training with organizations like PPG and BASFDefined career path with five levels from Senior Technician to World-Class Technician, each with bonuses, perks and recognitionWhat You Need to Succeed 1-2 years of auto painting experienceVision abilities including close, distance and color vision, depth perception and ability to adjust focusGreat communication skills to interact with customers and build accountsManual dexterity for repetitive-motion tasksStrong work ethic, self-motivation and the ability to work independentlyToughness and grit to work outside in all kinds of weatherPhysical stamina to kneel, bend and squat, as well as lift up to 45 poundsValid driver's license and good driving record The compensation offered for this position will depend on qualifications, experience, and geographic location. This position is primarily paid on highly incentivized commission structure. The starting compensation is expected to be between $60,000 and $80,000 annually. We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution).About Dent Wizard Dent Wizard is the nation's undisputed leader in automotive reconditioning services and vehicle protection products - and our success is the result of the great people who serve our customers. We're stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training.What's in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture: Our culture is what makes UniFirst an organization that stands out from the rest.Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you'll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED is preferred. Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age. Valid driver's license and a safe driving record are required. Knowledgeable in maintenance equipment. Minimum of 6 months' work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment test to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first.UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws UniFirst is an equal employment/affirmative action employer. If you need accommodation for any part of the application process because of a medical condition or disability, please send an e-mail to or call to let us know the nature of your request. UniFirst Recruiters and/or representatives will not ask job seekers to provide personal financial information when submitting a job application. Please be vigilant as such requests for information may be fraudulent.

Logistics at full potential.At GXO, we’re constantly looking for talented individuals at all levelswho can deliver the caliber of service our company requires. You know that a positive work environment creates happy employees, which boosts productivity and dedication. On our team, you’ll have the support to excel at workand the resources to build a career you can be proud of.1st Shift, Monday - Friday, 8:00am - 5:30pm (must be flexible)As the Facilities Engineering Manager, you will be responsible for driving continuous improvement activities to deliver better equipment performance across the contract packaging network. Become a part of our growing, dynamic team and we'll help you take your career to the next level. Pay, benefits and more.We are eager to attract the best, so we offer competitive compensation and a generous benefits package, including full health insurance (medical, dental and vision), 401(k), life insurance, disability and more.What you’ll do on a typical day:Coordinate teams to improve preventive maintenance programsSupport all site capital projects from scope creation to go-liveWork with site management and engineers to develop training programs for machine operatorsBuild relationships with key OEMs for future training and automation opportunitiesAct as superuser and network resource of all equipment Demonstrate an understanding of and adhere to GXO’s quality and environmental policies; maintain a safe and clean work environment and ensure accurate use of processesEnsure mechanical, plumbing, and electrical facility equipment is properly maintained in good, safe working orderPerform and/or schedule preventive maintenance of facility equipment and repairs in a timely fashionHandle contractor services and bids for HVAC, janitorial, waste removal and recycling, PIT maintenance and repair, elevator inspections and repair, pest control, annual service forpreventive maintenance on scales, packaging machines and tech support for conveyorsWhat you need to succeed at GXO:At a minimum, you’ll need:5 years of relevant work experienceBachelor’s degree or equivalent work or military experienceExperience with Microsoft Office and computerized scanner equipment Availability to work a flexible schedule as needed, including planned and unplanned overtime, which may include weekendsIt’d be great if you also have:Excellent interpersonal and management skills; ability to work collaboratively in a team environment and get along with diverse personalitiesSelf-motivated and able to work well with minimal supervision Familiarity with the most widely known and emerging tools, technologies and social applicationsExperience with PLC programming (Beckhoff, Allen Bradley), VFDsExperience with controls power distribution layouts, panel layouts, hardware specificationExperience with robots, high speed sorters, ASRS, Goods-to-Person robots, various conveyance systemsExperience setting up and working with a Computerized Maintenance Management SystemWe engineer faster, smarter, leaner supply chains. GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team – energetic, innovative people of all experience levels and talents who make GXO a great place to work.We are proud to be an Equal Opportunity/Affirmative Action employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status.GXO adheres to CDC, OSHA and state and local requirements regarding COVID safety. All employees and visitors are expected to comply with GXO policies which are in place to safeguard our employees and customers.All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test.The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement here.#appcastrequest

Location: Dallas, TXWhy You Should Join the Service Experts Team Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT!Service Experts Company Perks and Benefits for YOUTop Pay for Top Performers, including incentive and bonus opportunities, depending on the positionUp to $130,000 on average First Year Total Compensation” Total Compensation is Hourly plus Spiffs/Commissions***Depending on Center this could be moreGenerous PTO provided:20 paid days off within your first year of employment (vacation & national holidays)25 paid days off after your 2nd year of employmentNo layoffs during “Slow Season” – due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ample advancement and career-growth opportunities available across the U.S.Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programsWe provided wellness program options for free employee medicalCompany-provided smart phone, tablet, uniform plan, and tool replacement programWe’ll make you better at what you do with our internal Training AcademyBest-in-class 401(k) Retirement Savings Plan with attractive company matching contributionsCompany-paid employee Life Insurance with options for YOU and your Family!Short-term and Long-term disability insurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Key Responsibilities:Works under minimal supervision to perform residential and/or light commercial service and maintenance calls Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks Completes routine maintenance and equipment cleaning as needed or required Responsible for delivery and removal of parts and equipment needed to complete service work Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer. Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit. Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for Represents the company professionally, honestly, and ethically in all business matters and activities Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed Performs similar/other duties as needed or assigned Regular, reliable attendanceHealth & Safety Roles and ResponsibilitiesReports any unsafe acts, conditions and hazards to direct supervisor/manager immediatelyReports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediatelyCorrects substandard acts or conditions within area of controlUses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s)Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or wornComplies with the general rules as prescribed by company program(s) procedure(s)Operates devises or equipment as prescribed by company program(s) or procedure(s)Participates in any safety initiatives, teams, or committeesReports all injuries or incidents as prescribed by company program(s) or procedure(s) immediatelyProvides input on developing safety initiatives and plans to eliminate exposures that could cause accidentsDoes not perform act that may endanger the safety or well-being of othersDoes not engage in any pranks, contests, or rough boisterous behaviorWorks in compliance with applicable legislative requirementQualifications:High school diploma or GED with additional training and 2 to 5 years’ experience in HVAC with technical training certification required Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area EPA and safety certifications required Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories Proficient mechanical aptitude and the ability to operate all necessary tools and equipment Proficient and able to operate all necessary tools and equipment to perform various service projects Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision Proficient and able to install a basic duct fitting Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns Effective and efficient time-management and organizational skills Valid driver’s license with acceptable driving record Available to work flexible hours and on-call shifts as needed Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl. Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception Ability to lift up to 75 pounds and ability to lift and carry items weighing up to 50 pounds

Compensation Details:$80000 - $140000 Per YearJob Description:About Legacy PlumbingLegacy Plumbing is an award-winning, founder-operated Plumbing business founded in 2006. Legacy exists to positively impact and transform the lives of our employees, customers, and community by Redefining What Service Is, Inspiring Each Other to be Our Best Selves, and Spreading Good by Doing Good. At Legacy Plumbing, our employees don’t just “punch a clock.” They are part of something much bigger, and we all work together to fulfill our purpose of positively transforming each other, our customers, and our community. If you want a rewarding and meaningful career with top professionals, consider joining our team. Legacy Plumbing hires only the most seasoned professionals to represent our company. You don’t just acquire a new job when you join the Legacy Team. You become part of a family. We believe that personal relationships developed over time make the foundation of our company’s success. In 2022, Legacy Plumbing joined the Ace Hardware family to catapult our vision for the future to the next level. We're excited to continue delivering exceptional plumbing services and quality alongside the resources of the trusted Helpful brand. Together with Ace, we're looking forward to growing and supporting the local community for years to come.WHAT YOU WILL DOPut customers at ease while educating them on plumbing issues and fixing their problems.Wow our customers and build relationships with them.Communicate positively & effectively with teammates in the field and in the office.Be ready and willing to help out wherever you are needed.EXPERIENCE YOU WILL NEEDTradesmen, Journeyman or Master Plumbers LicenseAt least 5 years’ experienceMechanical aptitudeHustleProblem solving skillsBe teachableWhy Choose Legacy for your future career Fully Stocked Trucks: All of our well organized service trucks are mini warehouses on wheels, fully stocked so that we can take care of our customers same day and to set our Technicians up for success.Advanced Training: At Legacy we pride ourselves on our seamless onboarding and training to help our new team members thrive in their job role.Truly Family Focused: We want our team members to be able to spend time with their families and we honor that by sticking to our Monday- Friday service schedule and no on call schedule.Growth Opportunities: Legacy invests in its employees and prides itself on specialized training and companywide growth opportunitiesBenefits:401(k) with company matchDental insuranceFlexible spending accountHealth insuranceHealth savings accountLife insurancePaid time offProfessional development assistanceReferral programRetirement planVision insuranceSchedule:8 hour shiftSupplemental pay types:Bonus payCommission payEducation:High school or equivalent (Preferred)Experience:Plumbing: 5 years (Preferred)Language:English (Required)License/Certification:Driver's License (Required)Texas Plumbing License (Required): Tradesman, OR Journeyman OR MastersEqual Opportunity EmployerAce Hardware Corporation and its subsidiaries are committed to a policy of promoting equal employment opportunities. The company recognizes the importance of diversity and leveraging the skills and talents of all people to the mutual advantage of each individual and the organization. The company is committed to the prevention of employment discrimination related to race, religion, color, sex (including sexual harassment), gender identity, national origin, age, marital status, disability and military or veteran status, sexual orientation or any other action covered by federal or applicable state/local laws.DisclaimerThe pay range for this position starts as listed in the job posting, but could be higher based on education and experience. Please note, compensation decisions are dependent on the facts and circumstances of each opening. We take into consideration the minimum requirements outlined in the job description, such as an individual’s education, training and experience, the position’s work location, required travel (if any), and external market conditions when determining the final salary for potential new hires. Be aware that salary estimates published via alternate online job boards may not be a true representation of the actual pay range offered for this position. Please refer to the Ace position description for the accurate starting pay range information and feel free to discuss this with a Talent Acquisition professional if you are chosen to move forward with an interview. This written “Position Description” is not intended to cover all aspects of the position listed. It is meant to cover the basic/general essential job functions of a particular position. Ace Hardware Corporation reserves the right to change job duties, including essential job functions, according to business necessity.

Specific Duties and Responsibilities: Perform daily mechanical inspections and repairs to ride structures and unitsMaintain and trouble shoot amusement rides and park equipmentMaintain records for maintenance and inspections performedWork with other departments as needed to complete dutiesMaintain compliance with all safety rules, procedures, and regulationsMaintain positive interaction with other employees and guestsOther tasks and duties as assigned Job Requirements: Must be at least 18 years old, and possess a high school diploma or equivalentA varied skill set including knowledge of general maintenance, welding, and machine shop repairMust have experience in industrial or heavy equipment maintenance and repair procedures Must be able to work flexible hours including days, nights, weekends, holidays, and extended hours as scheduledMust be willing to work under various weather conditionsMust be able to lift up to 50lbs.Highly motivated, self-starter and great time managementMust have own basic hand toolsMust be able to climb and work at heights over 50 feetMust be able to stoop, bend, and lift regularlyMust have a valid driver’s license, a good driving record If you are able to answer "YES" to all of the following questions, please continue the application process by clicking "Apply" Can you provide legal documentation establishing your identity and eligibility to be legally employed in the United States Are you able to perform the essential functions of the job for which you are applying with or without reasonable accommodation Within the last 90 days, can you state that you have not used illegal or social drugs (excluding marijuana), such as MDMA (Molly), cocaine and crystal methamphetamine I am willing to agree that future text messages relating to Six Flags, Inc., including company news, job posting application status updates, and other information, may be sent on behalf of Six Flags, Inc. to the cell phone number I provide.

Crawford Services1405 Avenue T, Grand Prairie, TX 75050Why You Should Join the Service Experts Team Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth.Join us and become an EXPERT!Service Experts Company Perks and Benefits for YOUTop PayforTop Performers, including incentive and bonus opportunities, depending on the positionUp to$130,000on average First Year Total Compensation” Total Compensation is Hourly plus Spiffs/Commissions***Depending on Center this could be moreGenerous PTO provided:20 paid days off within your first year of employment (vacation & national holidays)25 paid days off after your 2nd year of employmentNo layoffs during “Slow Season” – due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ample advancement and career-growth opportunities available across the U.S.Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programsWe provided wellness program options for free employee medicalCompany-provided smart phone, tablet, uniform plan, and tool replacement programWe’ll make you better at what you do with our internal Training AcademyBest-in-class 401(k) Retirement Savings Plan with attractive company matching contributionsCompany-paid employee Life Insurance with options for YOU and your Family!Short-term and Long-term disability insurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Key Responsibilities:Works under minimal supervision to perform residential and/or light commercial service and maintenance calls Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks Completes routine maintenance and equipment cleaning as needed or required Responsible for delivery and removal of parts and equipment needed to complete service work Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer. Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit. Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for Represents the company professionally, honestly, and ethically in all business matters and activities Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed Performs similar/other duties as needed or assigned Regular, reliable attendanceHealth & Safety Roles and ResponsibilitiesReports any unsafe acts, conditions and hazards to direct supervisor/manager immediatelyReports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediatelyCorrects substandard acts or conditions within area of controlUses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s)Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or wornComplies with the general rules as prescribed by company program(s) procedure(s)Operates devises or equipment as prescribed by company program(s) or procedure(s)Participates in any safety initiatives, teams, or committeesReports all injuries or incidents as prescribed by company program(s) or procedure(s) immediatelyProvides input on developing safety initiatives and plans to eliminate exposures that could cause accidentsDoes not perform act that may endanger the safety or well-being of othersDoes not engage in any pranks, contests, or rough boisterous behaviorWorks in compliance with applicable legislative requirementQualifications:High school diploma or GED with additional training and 2 to 5 years’ experience in HVAC with technical training certification required Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area EPA and safety certifications required Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories Proficient mechanical aptitude and the ability to operate all necessary tools and equipment Proficient and able to operate all necessary tools and equipment to perform various service projects Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision Proficient and able to install a basic duct fitting Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns Effective and efficient time-management and organizational skills Valid driver’s license with acceptable driving record Available to work flexible hours and on-call shifts as needed Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl. Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception Ability to lift up to 75 pounds and ability to lift and carry items weighing up to 50 pounds

Responsibilities: Oversees, plans and issues work orders to appropriate shift team members for the implementation of equipment modifications as well as preventative and any corrective maintenance.Work closely with manufacturing departments to ensure production equipment is maintained on a consistent basis and all PM schedules are met in a timely fashion.Prepares and coordinates maintenance resources and provides recommendations for capital and continuous improvement projects.Reviews the operation of equipment with appropriate personnel to identify maintenance issues in the areas of Safety, Quality, Cost, Productivity and Customer Satisfaction.Tracking and improving machine downtime, increasing machine reliability that supports manufacturing to meet customer demand.Ensure compliance to all health and safety policies and that all equipment is properly safeguarded.Develop and implement maintenance procedures that are trackable and accountable to ensure maximum efficiency of the maintenance department.Manage relationships with contractors and service providers.Tracks, analyzes, and improves the Maintenance department’s KPIs.Review the location’s Key Performance Indicators KPIs (Daily, Weekly and Monthly) to make recommendations for improving plant operations, OEE (Overall Equipment Effectiveness) and maintenance problem resolution.Engages employees in problem resolution to improve production issues/efficiencies utilizing Lean Manufacturing techniques as needed.Fosters a positive working environment and drives the Maintenance team to meet set productivity targets and performance standards.Monitors and reviews Maintenance budget monthly: Prepares and implements annual budgets.Ensures all regulatory compliance with various governmental agencies such as city, county, state is met on a consistent basis.Drive cost savings through equipment repairs, upgrades, improved PM’s, decreased cycle time, etc.Ensures Maintenance employees are properly trained in all aspects of their jobs. Identifies training gaps and develops training plans as needed.Maintains facility compliance with all municipal, state/provincial, and federal fire and safety codes, including the testing/inspections of the fire protection system.Performs other duties as assigned. Requirements: Must have strong interpersonal skills.Bachelor’s degree in engineering or operations management.Prefer Valid Certified Maintenance Manager (CMM).Possess 10+ years of experience in Industrial Automation, PLCs, Pneumatics and Hydraulics, Injection Molding preferably in the Packaging Industry.Leadership experience in operations, maintenance, engineering and/or process improvement roles including managing teams of people.Previous experience working in a Lean environment preferred. Six Sigma Green or Black Belt Certification a plus.Solid understanding and knowledge of all OSHA guidelines pertaining to plant maintenance.Exceptional leadership and proven team-building skills.Excellent analytical thinking and innovative problem-solving skills.Ability to multi-task and prioritize in a fast-paced environment.Microsoft Office proficiency and SAP knowledge preferred.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

DeWALT Service Technician (Dallas Area: Carrollton, TX) On-the job training provided; experience preferred but not required. This position is hourly and pays up to $22hr depending on experience. Come make the world and accelerate your success. It takes great people to achieve greatness. People with a sense of purpose and integrity. People with a relentless pursuit of excellence. People who care about making things better For Those Who Make The World. Sound like you Join our top-notch team of more than 50,000 diverse and high-performing professionals globally who are making their mark on some of the world's most beloved brands, including DEWALT®, BLACK+DECKER®, CRAFTSMAN®, STANLEY®, CUB CADET®, and HUSTLER®.The Job: As a DeWALT Service Technician, you'll be part of our Product Services team working as a on-site employee. You'll get to: Handle simple repairs to all portable electric and pneumatic tool, light construction equipment, & outdoor products.Troubleshoot tool failure--fully or partially disassembling unit to examine components for wear/defects and replacing parts that are worn or defective. Assist with maintenance of shop equipment and maintains clean and safe work environment.Properly inspect tools and equipment for safe operation prior to use, returning tools in good condition to appropriate storage area after use.Complete work orders using repair parts and labor to include pricing and pertinent customer information.Manage inventory by ensuring accuracy with parts and accessories.Other duties as assigned.The Person: You love to learn and grow and be acknowledged for your valuable contributions. You're not intimidated by innovation. Wouldn't it be great if you could do your job and do a world of good In fact, you embrace it. You also have: Ability to interpret mechanical diagrams, wiring schematics and printed servicing data.Knowledge of electricity principles and air flow as it applies to a power source for power tools.Ability to diagnose mechanical and electrical faults in power tools and equipment. Ability to perform simple mathematical calculations.Goal driven mentality. You like to meet and maintain daily/weekly/quarterly productivity goals without sacrificing quality. The Details: You'll receive a competitive salary and a great benefits plan including:Medical, dental, life, vision, wellness program, disability, 401(k), Employee Stock Purchase Plan, paid time off, and tuition reimbursement.Discounts on Stanley Black & Decker tools and other partner programs. And More: We want our company to be a place you'll want to be - and stay. Being part of our team means you'll get to: Grow: Be part of our global company with 20+ brands to grow and develop your skills along multiple career paths. Learn: Have access to a wealth of learning resources, including our Lean Academy, Coursera®, and online university. Belong: Experience an awesome place to work, where we have mutual respect and a great appreciation for diversity, equity, and inclusion. Give Back: Help us continue to make positive changes locally and globally through volunteerism, giving back, and sustainable business practices. What's more, you'll get that pride that comes from empowering makers, doers, protectors, and everyday heroes all over the world. We're more than the #1 tools company. More than a driving force in outdoor power equipment. More than a global leader in industrial. We're visionaries and innovators. As successful as we've been in the past, we have so much further to go. That's where you come in. Join us! #LI-RB #LI-Onsite All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran's status, or any other protected characteristic. We Don't Just Build The World, We Build Innovative Technology Too. Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you'll get the unique chance to impact some of the world's most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights. Who We Are We're the World's largest tool company. We're industry visionaries. We're solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art "smart factory" products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company. Benefits & PerksYou'll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.What You'll Also GetCareer Opportunity: Career paths aren't linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.Learning & Development: Our lifelong learning philosophy means you'll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities). Diverse & Inclusive Culture: We pride ourselves on being an awesome place to work. We respect and embrace differences because that's how the best work gets done. You'll find we like to have fun here, too. Purpose-Driven Company: You'll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices. EEO Statement: All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran's status or any other protected characteristic. If you require reasonable accommodation to complete an application or access our website, please contact us at or at . Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password. Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily . WHAT WE OFFER We are a large company serving many unique customers - because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering: Ongoing Education & Training Exposure to a Large Variety of Projects Industry-leading Benefit Packages Advanced support and tools designed to improve your workflow PAY $20-35HR DOE Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time. Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers' expectations Provides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner. Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base. Test malfunctioning systems and components using electrical and/or mechanical skills. Maintain legible corporate and personal records of work history. Provides department support by processing job tickets, and work orders to the necessary department promptly. Provide support by picking up, delivering, and installing cases. Perform work on minor construction and remodeling projects including startups of new installations. Drives company vehicle in a safe manner. Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED. EPA certification. Certification from an accredited vocational-technical or trade school is a plus! Minimum 2+ years of commercial refrigeration experience required. Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus. Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. Must have a good driving record and be able to work independently. Emergency on-call availability is a basic requirement. Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

The Maintenance Mechanic maintains the physical plant and ground to ensure a safe and efficient environment of care to serve the needs of the patients, visitors and employees. This position handles preventative maintenance and repairs for a wide range of hospital equipment and utility systems, plumbing, electrical, HVAC, light construction, painting, and grounds keeping. Additional responsibilities may include security and floor care as assigned. Job Code: 100085 Qualifications- Valid driver's license may be required. Education, Training and Years of Experience: - High school graduate or equivalent work experience preferred. - Previous experience in the areas of preventative maintenance, equipment and systems repair, HVAC, plumbing, electrical, and/or construction required. - Previous experience in a healthcare setting preferred. Machines, Equipment Used: - Motor vehicles, outdoor equipment such as lawn mowers and snow blowers, personal protective equipment, dollies, pressure washer , hand tools, ladders, air compressors, brooms, vacuums, meters, welders, leak detection equipment, gauges, carts, knives, hose, maps, power tools, scaffolds, air powered equipment, hazardous chemicals, torches, refrigerant recovery equipment, vacuum pumps, and other HVAC/R equipment. - General office equipment such as telephone, copy machine, fax machine, calculator, computer. Physical Requirements: - Good visual acuity and ability to communicate. - Ability to lift a minimum of 50 pounds on a regular basis and ability to push/pull a minimum of 50 pounds, which includes lifting, pushing and/or pulling equipment, supplies and tools. Reasonable assistance may be requested when lifting pushing and/or pulling are undertaken that exceeds these minimum requirements - Ability to demonstrate safe retrieval skills from above head to floor level with objects up to 50 pounds. - Must demonstrate the ability to tolerate frequent position changes such as twisting, stooping, reaching, squatting, kneeling, pushing/pulling, and bending positions for complete shift. - Ability to work on ladders, scaffolds and be able to sit, stand and walk for momentary to extended periods of time. - Ability to safely work with hazardous materials. Compliance: - Adheres to the company's Standards of Business Conduct. - Maintains current licensure and/or certifications, if applicable. Skills and Abilities: - Ability to speak, read, write, and communicate effectively. - Ability to coordinate, analyze, observe, make decisions, and meet deadlines in a detail-oriented manner. - Ability to work independently without supervision. Environmental Conditions: - Indoor, temperature controlled, smoke-free environment. Occasional outdoor exposure. - Exposure or potential exposure to blood and body fluids may be required. - Handicapped accessible. - May work under stressful circumstances at times. Proficiency or Productivity Standards: - Meets established attendance standards. - Adheres to hospital/department dress code including wearing ID badge. - May be required to work weekdays and/or weekends, evenings and or night shifts if needed to meet deadlines. - May be required to work on religious and/or legal holidays on scheduled days/shifts. - Will be required to work as necessary during disaster situations, i. e., before, during or after a disaster. - May be required to stay after workday to assist after a disaster situation until relief arrives. - May be required to perform other duties as assigned by supervisor.

The pay range per hour is $27.80 - $33.19Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Engineering & Facilities (MT1)About job:Tuition Reimbursement programBenefits eligible after two weeks of employmentCurrently hiring for below shifts:L2 Shift: Wednesday - Saturday from 2:30pm - 12:30am ($1.50 shift differential)L3 Shift: Wednesday - Saturday from 10:30pm - 8:30am ($2.50 shift differentialAbout us:As a Fortune 50 company with more than 400,000 team members worldwide, Target is an iconic brand and one of America's leading retailers. Working at Target means the opportunity to help all families discover the joy of everyday life. Caring for our communities is woven into who we are, and we invest in the places we collectively live, work and play. We prioritize relationships, fuel and develop talent by creating growth opportunities, and succeed as one Target team. At our core, our purpose is ingrained in who we are, what we value, and how we work. It’s how we care, grow, and win together. Target is an iconic brand, a Fortune 50 company and one of America’s leading retailers. Target Global Supply Chain and Logistics is evolving at an incredible pace. We are constantly reimagining how we get the right product to the guest better, faster and more cost effectively than ever before. We are becoming more intelligent, automated and algorithmic in our decision-making, so that no matter how our Guest chooses to shop—in stores or on Target.com—we deliver the convenience and immediate gratification they demand and deserve. We are on a mission to win decisively over any competitor, with a seamless and superior guest service experience unlike any they can offer. Our teams work with the agility our mission requires, and we constantly come together to implement new processes in record time.A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 1 (MT1), you will maintain and repair automated material handling and facility equipment, and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target mechanics to solve problems, validate quality of work for outside specialty contractors, and meet aggressive time lines. You will collaborate with Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You will operate Target owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies as needed. This is an entry-level position in the technician role with promotion potential to Maintenance Technician 2, by completing and demonstrating proficiency in all related Maintenance Technician 2 job requirements, measured by both hands-on validation and by a written assessment. A successful candidate in this role will:Maintain and perform basic troubleshooting of electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, scales and printer applicatorsDemonstrate mechanical proficiency for hydraulic and pneumatic systems, and AC/DC electrical motors and drivesAdjust, reset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Maintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsPerform preventative maintenance on facility equipment (i.e. Powered Industrial Trucks, HVAC, air compressors and dryers, and balers)Perform basic electrical maintenance and simple repair/replace of various electrical circuits and related electronic equipment, using tools such as multi-meters and infrared thermometers Read and understand basic electrical and electronic schematicsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes or cartons up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licenseBasic PC competency and ability to use mobile apps on handheld devicesFamiliar with simple wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresCommonly used industrial toolsBasic Carpentry and PlumbingBasic blueprint and schematic readingBasic AC/DC electrical and electronic principlesBasic metal fabrication and weldingBasic Industrial ControlsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with Programmable Logic Control (PLC) programs and Human Machine Interfaces (HMIs)Ability to troubleshoot basic Input/Output functionsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)Target will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Target store or Supply Chain Facility or reach out to Guest Services at 1-800-440-0680 for additional information.

Overview: OVERVIEWEnjoy top hourly pay plus a competitive bonus plan, a four-day workweek, and a great benefits package (medical, dental, & vision, PTO, and 401k).Our Mobile Automotive Technicians enjoy a fully equipped, company provided van with state-of-the-art tools, company iPhone with access to resources like Mitchell Pro-Demand, as well as a growing client base that comes from being part of one of U.S. News’ Best Companies to Work For.You can grow and advance your career through on-the-job training and paid training opportunities. In addition, AutoNation Mobile Service is part of AutoNation which allows our mobile technicians incredible growth opportunities throughout the United States. AutoNation Mobile Service is fast-growing and now is the right time to get in!WE WILL DEPEND ON THIS PERSON TO Perform vehicle repairs within regular scope of work (excluding tasks such as steering rack, fuel tank, engine teardown)Diagnose and assess circumstance and situation, depending on scope of work, either perform repair or sublet repair to partner shopsDiagnose and repair vehicles to ensure customer needs are metProvide labor and time estimates for additional automotive repairsEncourage customers to schedule recommended work with fact-based selling and automotive expertiseBe part of a team that cares about customers and their carsWork as part of a team to solve technical problems quickly and effectivelyPerforms other duties as requested by managerMust be able to remain in a stationary position for 50% of the timeMust have the ability to lift up to 50 poundsYOU SHOULD HAVEMinimum of 7 years of recent professional automotive repair experienceMaster level ASE certification or equivalentKnowledge in working and using repair shop software (All Data, Mitchell 1, etc.)Valid driver's license (clean background)Pass a pre-employment drug screenA desire to provide an extraordinary customer experienceComfortable working in varying environmentsSpeaking and writing in English is required, Spanish is a plusHigh school diploma or the equivalentWORKING WITH USFlexible Schedule: 4 days on, 3 days off every week!Competitive Pay (DOE)Paid vacation timeMedical, dental, and vision insurance401(k) matching 50% up to first 5%Access to state-of-the-art tools and equipment (you do not bring your own)Company branded vehicle provided for use during work shiftsWork clothes (uniforms) providedCasual atmosphere and great people to work withDOT Prerequisites: Employment will be contingent upon the successful completion of all prerequisites required by the U.S. Department of Transportation (DOT) / Federal Motor Carrier Safety Administration (FMCSA) regulations, including a physical and medical certification. Company OverviewAutoNation, a provider of personalized transportation services, is driven by innovation and transformation. As one of America's most admired companies, AutoNation delivers a peerless Customer experience recognized by data-driven consumer insight leaders, Reputation and J.D. Power. Through its bold leadership and brand affinity, the AutoNation Brand is synonymous with "DRVPNK" and "What Drives You, Drives Us." AutoNation has a singular focus on personalized transportation services that are easy, transparent, and Customer-centric.BenefitsClick here to learn more about our Benefits.Join us as we pave the way to moving our company, our communities and our industry forward. Apply today at a location near you or wherever you dream the road will take you.AutoNation is an equal opportunity employer and a drug-free workplace.

Pay: $19.50 per hourTheMaintenance Technician 1versees the day to day engineering operations in the lodge. This includes but is not limited to project management, general life safety, ordering, working with vendors. Responsible for completing preventative maintenance and repairs through-out the hotel guestrooms, public spaces, equipment, buildings & grounds.Responsibilities:Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication.Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings.Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items.Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards.Ensures that all work performed is conducted in a safe and timely manner adhering to standards of safety and effective equipment utilization.Maintains working knowledge of departmental safety procedures. Attends safety-training programs and in-service as required for continued development.Maintains the necessary service records on mechanical and structural systems.Ensure all standard operating procedures are followed for park operation, employee relations, timekeeping and safety. Including ensuring all daily, weekly and monthly documentation is being completed.Other duties as deemed appropriate by the Assistant Director of Engineering.Qualifications:Technical DegreeTechnical TrainingTrade Related CertificationsHospitality, Healthcare or related industry experienceTrade related certifications preferred in HVAC and/or ElectricalMove, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Ability to complete work at heights up to 50 feet using ladders, harnesses and lifts.Computer skills including knowledge of database software, internet software, order processing systems, Microsoft Office suite.Valid Driver’s License

StandardAero offers:Competitive wagesGenerous paid time offInsurance includes medical, dental and vison benefitsRetirement wages Clean, modern, air-conditioned facilitySafety focused cultureAdvanced opportunities Build an Aviation Career You're Proud OfYour work ties us all together, helping our teams' function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks.Quality InspectorAs an Aircraft Engine Quality Inspector, you'll provide quality assurance support for all company products and processes to ensure that the highest standards for quality are maintained. Monitors processes, develops improvements and interfaces with functional departments to achieve customer satisfaction and to resolve issues through cooperative methods.What you'll do:Reviews factors in light of quality of product and reliability of quality during production.Conducts internal audits on departments and business units to ensure compliance with company instructions and policies.Ensures compliance to the applicable quality procedures affecting the production process in the cell.Participates in continuous improvement of cell processes.Research, compiles and reviews company procedures.Collects and analyzes quality data for the purpose of identifying trends with respect to non-conformance documents.Reports necessary information and offers solutions to production, materials and the company as a whole, to correct specification or process problems that are occurring.Monitors warranty procedures including investigation, root-cause, corrective action and follow-up to ensure that continuous improvement is occurring.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Verifies the completion of the work instructions identified on the task control number (TCN) and the correct configuration and identification of the end product to ensure task compliance. Carries out special projects as assigned.What you'll need: Strong planning, organizational, analytical, leadership, interpersonal, decision making, oral and written communication skills.Thorough knowledge of company instructions, company processes, quality and original equipment manufacturer manuals.Knowledgeable in the assembly methods and techniques used.Proficient in the use of precision measuring instruments.Knowledgeable in the quality requirements relating to the production process.Thorough knowledge of Foreign Certification requirements and other regulatory bodies.Thorough knowledge of ISO 9000 quality system requirements.Thorough knowledge of AS9110, SABERThorough knowledge of Cost of Poor QualityThorough knowledge of Corrective Action Request Thorough knowledge of internal audit policies and procedures.Thorough knowledge of quality improvement tools and techniques.Working knowledge of Microsoft Office (Word, Excel, Access, PowerPoint, Outlook).Working knowledge of production management computer systems.College diploma in mechanical engineering technology; or equivalent.Experience as an inspector in an aerospace environment.Must be authorized to work in the US.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Seasonal Service Professional About Hawx Hawx Pest Control is a technology-driven company that is revolutionizing the pest management industry. Hawx serves a crucial public health function by using state-of-the-art equipment and environmentally conscious products to protect the people and places our customers love. At Hawx we pride ourselves on our internal company culture. Our team members benefit from being part of a company that actively rewards employees for being team players while providing ample opportunity for personal and professional growth. We understand how important it is to recruit and reward people who are enthusiastic about developing their careers and opening new opportunities while delivering a best-in-class customer experience. Job Summary We are seeking to hire a talented Seasonal Service Professional who will inspect and perform pest control treatments for residential and commercial customers using high quality and environmentally responsible products. DETAILS $18 - $20 per hourFull-time positionWork travel required Responsibilities Perform efficient routes individually.Enter and exit structures, crawl spaces and climb on top of structures. Address and alleviate customer concerns and pest related issues by using integrated pest management strategiesMaintain and care for company equipment, vehicle and gas card and other job-related items.Complete all duties required by a pest/mosquito/termite service professional: customer consultation, inspection, eliminate/identify conducive conditions and proper treatments. Record work activities and complete all paperwork after finishing services.Exemplify safe performance of job duties and adherence to safety policies and procedures. Qualifications TRAITS Reliable: Establishes and upholds our company culture and values. Believes in the company mission and the Hawx culture of excellence. Shows up on time and gets the job done. Stays on top of tasks and manages time and responsibilities well. People Person: Keeps things positive and gets energy from people. Adaptable and flexible while working with different personality styles. Develops strong working relationships with frontline team members. Enjoys working cross-functionally with Sales teams and knows how to relate to and work with them. SKILLS Top Performance: Sets the bar for the team in service quality and route efficiency.Effective Communication: Works well with team members of any skill level to level up their performance and has the ability to onboard and train new hires.Technical Expertise: Has a solid understanding of the pest control field and the technical aspects of the job being performed by frontline employees. Service Professionals must understand protocols, application techniques, products, equipment and other tools that are used on a day to day basis so they can train and coach to a high standard. EXPERIENCE & OTHER REQUIREMENTS Pest management experience, preferably in a residential market, with responsibilities related to coaching and developing frontline team members.Must have and maintain any required state licenses/certifications.Must be 21 years or older with a valid driver's license.Must pass required background check and drug screening.Hawx Services, LLC is an Equal Opportunity Employer committed to fostering an inclusive work environment with the most qualified employees. Both in our hiring process and in the experiences that our team members have as employees, Hawx is committed to diversity, equity, and inclusion. Accordingly, Hawx is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, sexual orientation, age, marital status, disability, gender identity, or veteran status.

Overview: Driver's Edge Auto Repair has delivered fast and easy service for over 10 years. We proudly serve the greater Dallas & Fort Worth areas and provide great service on an array of automotive services, optimizing performance utilizing proven processes inside of a systematic approach to automotive repair.The General Service Technician will perform non-technical service repairs such as oil changes, tire and wheel related services, alignments, flushes, and more. While working alongside ASE Certified Automotive Technicians, you will get the training necessary to get to the next level in your career. If you are interested in becoming a certified ASE Automotive Technician, this is the opportunity for you. This could be the beginning of your successful career. Starting at: $13.00/Hr. to $16.00/Hr. Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities : Performs tire mounting/dismounting, wheel balance and tire rotation. Performs oil changes and other basic services Utilizes the company's Multi-point Inspection and/or Repair Order to properly document the vehicle condition Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance Requires driving vehicles in a safe and courteous manner obeying all traffic laws Includes transporting customers, picking up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle Conducts State Safety and Emission Inspections (in applicable locations) on vehicles in an ethical manner following all company and state guidelines Follows all safety procedures and reports any concerns to direct supervisor Ability to work flexible schedules, including weekends as needed. Other duties as assigned by direct supervisor Adheres to Sun Auto's core values, and all company policies and procedures as outlined in the Sun Auto Tire & Service Employee Handbook Qualifications : Possesses a general understanding of under the hood, mechanical and under carriage assemblies is preferred Valid Driver's license in the work State Ability to obtain a State Inspector License is preferred High School Diploma or equivalent preferred Working Conditions and Physical Demands : The General Service Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions .The General Service Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently. Communicate with customers and shop personnel Vision sufficient to detect color, depth, and re-focus Previous automotive experience preferred, but we will consider energetic and hard-working individuals with a passion for cars. Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there is ALWAYS something to do. Must possess a valid driver's license and be able to pass a pre-employment drug test, MVR, and criminal background check.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#bayard

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay, based upon the UA Local 100/146 rates.Comprehensive benefits package provided by the UA Local 100/146.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doJohnson Controls Inc. is looking for forward-thinking talent to join our growing organization. During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant building automation technologies in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.We are looking for a skilled mechanic who has experience with air cooled or water-cooled machines to work with top of the line commercial and industrial equipment.We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.What we look forRequiredMust be a member of or willing to join the local United Pipefitters Association (UA Local 100/146).Journeyman status required.Minimum of 5 years of practical working experience on air- cooled and water-cooled chillers with strong HVAC/ mechanical troubleshooting experience.You may be required to pass a knowledge examination to assess proficiencies.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, and valid driver's licenseJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

$25.00/hourShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise. What You'll Do: As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures. Perks You'll Get: Bi-weekly hourly wage (New York and Puerto Rico: weekly wage) On-the-job training to expand your automotive abilities and help to obtain ASE Certificates Paid time off Medical, dental and other insurance Flexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expenses Retirement benefits (401k) Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars * Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License and good driving record At least 2 years of auto repair experience or coursework with automotive certifications 1 ASE certification (ability to acquire 2 additional ASE certifications within first year) Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/Diesel Comfortable working in a mechanical shop with moderate or loud noise levels Must have a complete set of tools required for auto repair and maintenance Basic computer skills including typing, data entry Must be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehicles Must be 18 years of age and legally authorized to work in the United States Previous Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate. Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. DallasTexasUnited States of America

Priv is the leading on-demand beauty and wellness service app that delivers professionals straight to our client’s door for hairstyling, makeup, massage, nail, facial, spray tan, ear piercing, and fitness services. We currently serve 30+ markets in the United States! We are seeking talented and professional Makeup Artists to join our community of freelance pros in your area. Be a part of our loyal team of professionals, committed to transforming the beauty and wellness industry by delivering clients a luxury experience anywhere, anytime. We work with YOUR availability; you never have to take an appointment that doesn't fit into your busy life. Earn additional income doing what you love and meeting new clients! Why Priv “I've been with Priv for 4 years and love the team, flexibility and company. Would never work anywhere else!” - Prv Professional Be an independent contractor and work when and where you wantHave the freedom to work for other apps or salonsPriv is a one-stop-shop to offer all of your services We offer competitive rates and compensation Attend professional development workshops to help you grow in the industry Build lasting relationships with clients and other beauty and wellness professionals Participate in industry level events, premiers, trade shows, and fashion shows Pay: $70 - $100 per hour https://gopriv.com/

Make every paint job a masterpiece. Be a wizard.Now paying a $2,500 Sign on Bonus! As a Paint Tech with Dent Wizard, you'll have unlimited earning potential and the ability to control your day as you deliver fast, flawless paint jobs that dazzle. We're hiring right now for a Paint Technician in Dallas, TX.Utilizing specific surface preparation, the latest spray equipment and proven painting techniques, you will inspect, prepare, blend and finish vehicle surfaces. Working at locations that may include automotive dealerships, rental agencies and auto auctions, you'll do everything from simple touch-ups to repairing paint damage.The Dent Wizard Difference Unlimited, uncapped earning potential based on commission: the harder you work, the more you can makeExcellent benefits, including medical, dental, vision, 401(k), paid vacation and moreOutstanding perks, including mobile phone, company vehicle, gas card and moreWe will fully equip you with the most current tools and supplies Independence to manage your day; no micromanagementGreat work/life balance that puts you in charge of your scheduleOn-the-job training in our computerized color matching systems and painting techniques from experienced paintersCertifications and advanced training with organizations like PPG and BASFDefined career path with five levels from Senior Technician to World-Class Technician, each with bonuses, perks and recognitionWhat You Need to Succeed 1-2 years of auto painting experienceVision abilities including close, distance and color vision, depth perception and ability to adjust focusGreat communication skills to interact with customers and build accountsManual dexterity for repetitive-motion tasksStrong work ethic, self-motivation and the ability to work independentlyToughness and grit to work outside in all kinds of weatherPhysical stamina to kneel, bend and squat, as well as lift up to 45 poundsValid driver's license and good driving record The compensation offered for this position will depend on qualifications, experience, and geographic location. This position is primarily paid on highly incentivized commission structure. The starting compensation is expected to be between $60,000 and $80,000 annually. We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution).About Dent Wizard Dent Wizard is the nation's undisputed leader in automotive reconditioning services and vehicle protection products - and our success is the result of the great people who serve our customers. We're stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Fleet Mechanic to join our UniFirst community. As a Team Partner in the Maintenance Department, you will be responsible for carrying out all corrective, preventative, and predictive maintenance on fleet vehicles to ensure the safe, efficient, and reliable operation. In addition, you will be responsible for maintaining fleet vehicles in a safe working condition meeting DOT or other regulatory requirements. At UniFirst we have a standard Monday - Friday work week with periodic and weekend overtime. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Verify all vehicles and drivers are properly licensed. Ensure all preventative maintenance is performed when due. Verify that the appearance of fleet vehicles meet UniFirst standards. Sustain a clean, safe, and maintained garage. Purchase parts and monitor quotes for best pricing and quality. Provide back up for a shuttle run when needed. Ensure all corrective, preventative, and predictive maintenance on fleet vehicles is completed and up to date. Maintain fleet vehicles to ensure they are in safe working conditions, meeting DOT or other regulatory requirements. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High School Diploma and/or GED equivalent is preferred Must be 21 years of age or older. Associates degree from an accredited technical school and equivalent experience is preferred. Valid driver's license and a safe driving record are required. Must meet DOT requirements. Must be able to perform all vehicle repairs, have diagnostic knowledge with GM drivability, and some diesel experience is highly preferred. Must be willing to work overtime as needed and perform occasional road calls. 3 - 5 years of proven medium to heavy-duty vehicle repair including: Preventative Maintenance, tire & wheel, air & hydraulic brakes, drivetrain, computerized diagnostics, suspension, electrical and A/C. Proven computer skills and ability to use diagnostic software Ability to lift up to 80lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team.UniFirst is an equal employment/affirmative action employer. If you need accommodation for any part of the application process because of a medical condition or disability, please send an e-mail to or call to let us know the nature of your request. UniFirst Recruiters and/or representatives will not ask job seekers to provide personal financial information when submitting a job application. Please be vigilant as such requests for information may be fraudulent.

Location: Dallas, TXWhy You Should Join the Service Experts Team Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT!Service Experts Company Perks and Benefits for YOUTop Pay for Top Performers, including incentive and bonus opportunities, depending on the positionUp to $130,000 on average First Year Total Compensation” Total Compensation is Hourly plus Spiffs/Commissions***Depending on Center this could be moreGenerous PTO provided:20 paid days off within your first year of employment (vacation & national holidays)25 paid days off after your 2nd year of employmentNo layoffs during “Slow Season” – due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ample advancement and career-growth opportunities available across the U.S.Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programsWe provided wellness program options for free employee medicalCompany-provided smart phone, tablet, uniform plan, and tool replacement programWe’ll make you better at what you do with our internal Training AcademyBest-in-class 401(k) Retirement Savings Plan with attractive company matching contributionsCompany-paid employee Life Insurance with options for YOU and your Family!Short-term and Long-term disability insurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Job Summary: We are currently seeking a highly skilled and experienced Plumber II to join our Service Experts HVAC and Plumbing team. In this role, you will be responsible for leading plumbing projects, performing advanced installations, repairs, maintenance, and troubleshooting of plumbing systems. The ideal candidate should possess extensive knowledge of plumbing codes and regulations, exceptional problem-solving abilities, and strong leadership skills.Responsibilities:Lead plumbing projects, including new installations, remodeling, repairs, and maintenance of plumbing systems.Interpret and analyze blueprints, technical drawings, and specifications to plan plumbing system layouts and installations.Ensure compliance with plumbing codes, regulations, and safety standards.Estimate materials, equipment, and labor costs for plumbing projects.Collaborate with clients, contractors, and team members to discuss project requirements, timelines, and progress.Supervise and provide guidance to junior plumbers and apprentices.Clean up job sites and ensure proper disposal of waste materials.Install, repair, and maintain plumbing systems, including pipes, fixtures, drains, and water heaters.Cut, thread, and bend pipes using advanced tools and techniques.Weld, solder, or join pipes using approved methods.Conduct thorough inspections of plumbing systems to identify and diagnose complex issues or defects.Troubleshoot plumbing problems and provide effective solutions.Coordinate with suppliers to procure plumbing materials and equipment.Keep accurate records of work performed, materials used, and project progress.Train and mentor junior plumbers, apprentices, and helpers.Stay updated with industry trends, advancements, and regulations.Health & Safety Roles & Responsibilities:Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediatelyReports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediatelyCorrects substandard acts or conditions within area of controlUses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s)Never removes or renders ineffective any safety guards, devices, or clothing prescribed to be in place or wornComplies with the general rules as prescribed by company program(s) procedure(s)Operates devises or equipment as prescribed by company program(s) or procedure(s)Participates in any safety initiatives, teams, or committeesReports all injuries or incidents as prescribed by company program(s) or procedure(s) immediatelyProvides input on developing safety initiatives and plans to eliminate exposures that could cause accidentsRequirements:High school diploma or equivalent.Proven experience as a Plumber I or 5-10+ years in a plumbing role.Thorough knowledge of plumbing codes, regulations, and best practices.Extensive experience in interpreting and analyzing blueprints and technical drawings.Strong understanding of plumbing systems, materials, and tools.Exceptional problem-solving and troubleshooting abilities.Effective communication, leadership, and organizational skills.Ability to work independently and as part of a team.Physical stamina and the ability to lift heavy objects.Valid driver's license.Working Conditions:This position may involve physical labor and working in confined spaces or at heights.Work may be performed indoors or outdoors, depending on the project.Exposure to various weather conditions, including heat, cold, and humidity.May be required to work in hazardous environments or with potentially dangerous materials.Availability to work evenings, weekends, and on-call shifts as needed.