Company Name: ARS-Rescue Rooter Overview: Position: HVAC Service TechnicianPay: $65,000 - $100,000 per hourEarning potential over $100K/year based on performanceSchedule: Various SchedulesFull-time, year-round workAmerican Residential Services is the largest provider of residential home services in the US, employing more than 6500 professionals across the country. ARS has been serving its customers with HVAC, Plumbing and Electrical solutions for over 45 years since its establishment in 1975.What We Offer:Insurance available after 31 daysLow-cost medical (as low as $5/week)Dental, vision, HSA/FSA401(k) with company match13 days PTO + 8 paid holidaysCompany-paid life insuranceTake-home vehicle + gas cardUniforms + cleaning serviceWeekly direct deposit Responsibilities: Troubleshoot, service, and repair residential HVAC systems with the support of full training, professional tools, and a strong leadership network. Qualifications: What You Need:3-4 years of residentialHVAC experienceEPA certification (or ability to obtain)Valid driver’s license & clean driving recordMust pass background and drug screeningAbility to enter attics, crawlspaces, and lift heavy equipmentIf you have the experience we seek, APPLY NOWNote: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. Must have experience withLine boring on a CNC horizontal boring mill This will be a 2nd shift opportunity; Overtime may be required. Hires are Eligible for a $2500 sign on bonus!!!!! Responsibilities: Operating CNC Machines, Manual Machines, CNC Lathe, VTL, HBMOperating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating CNC Machines, manual lathes, milling machines.HS Diploma / GED and 3-5 years relevant experienceExperience operating LARGE machinesHBM Machine, tooling for Line Boring Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-14270 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Powell is an engineer to order manufacturer of switchgear. We are seeking an experienced Senior Industrial Maintenance Technician to join our team at our facility located in Houston, TX, 77075. Schedule: Monday-Thursday 6:00am-2:30pm plus OT Position Summary As a Maintenance Technician, you will be responsible for learning how to diagnosis, troubleshoot, and repair of all facets of the manufacturing facility. The person in this role must be self-driven to perform preventative maintenance and continual improvements. The Maintenance Technician will perform routine and preventative maintenance and repair manufacturing and fabrication equipment, including CNC Laser Cutting and CNC Turret Punch Press equipment, Robotic Welding equipment, Automated Material Handling equipment, and Automated Powder Coat Painting equipment. Essential Responsibilities Reading assembly drawings, schematics, and equipment layouts.Maintaining, diagnosing, troubleshooting, and repairing electrical circuits. (occasional)Maintaining, diagnosing, troubleshooting, and replacing control devices.Maintaining, diagnosing, troubleshooting, and replacing hydraulic equipment, circuits and components.Maintaining, diagnosing, troubleshooting, and replacing pneumatic systems.Must be able to look up parts from equipment drawings, schematics and parts lists.Must be able to understand our Computerized Maintenance Management System (CMMS) and be able to conform to our work order procedures.Adhering to all plant safety and environmental guidelines, policies and procedures.Requires working with a wide variety of other job groups and involves working around traffic, heights, electricity, hydraulics, and heavy equipment including moving parts.Assisting crew members and working in a team environment. Minimum Qualifications High School Diploma or General Education Diploma; associate degree in electrical technology preferred.Minimum of 3-4 years of experience in an Industrial Maintenance role. Skills, Abilities & Other Requirements Must be able to efficiently and effectively use a computer, CMMS and related software related to record-keeping and machine troubleshooting/maintenance.Strong mathematical ability is essential.Must be self-driven and able to drive organizational change.Must work well in a team environment.Must be willing to learn and perform with minimal direction.Must have mechanical and electrical knowledge.Must have basic computer skills: Microsoft SuiteMust be fluent in English with good written and verbal communication skills.Must have manual dexterity.Ability of strong mechanical aptitude.Ability to read mechanical and electrical schematics.Ability to troubleshoot and repair low voltage (12 v DC) – high voltage (480 v AC 3 Phase) electrical systems.Ability to visually and mentally make priority decisions and independent judgment calls based on the situation at hand.Ability to work long hours and weekends.Ability to operate hand and power tools, industrial machines, digital cameras, phones, scanners, tools, and controls in a safe manner.Ability to work and concentrate in a noisy environment. Working & Environmental Conditions Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities.Required to wear personal protective equipment (PPE) (i.e., safety shoes, hard hats, bump caps, safety glasses, hearing protection, safety harnesses as required) and respirators when required.Must be able to work from all types of ladders (step ladders, "A" frame ladders, etc.)Specific vision abilities required include close vision, distance vision, color perception, peripheral vision, depth perception, and ability to adjust focus, hand-eye coordination.Working at heights usually no higher than 20 feet in the air on an elevated structure using proper lift equipment and Fall Protection Equipment.Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs or step ladders.Bending the body at the waist, the legs at the knees, and extending arms and hands in any directionContinuous standing and walkingAble to use upper extremities frequently, work with both arms above shoulders and use both arms at full length frequently.Must be able to meet physical lifting demand up to 50lbs.Frequent use of hand tools and power tools. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. *Posted position does not provide visa sponsorship or relocation. #LI-KC1 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Company Name: ARS-Rescue Rooter Overview: Pay: $80-120k (Performance Pay Based)Earning potential over $100K/year based on performanceSchedule: FT-Weekend AvailibiltyFull-time, year-round workJoin ARS, the nation’s largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience.What We Offer:Insurance available after 31 daysLow-cost medical (as low as $5/week)Dental, vision, HSA/FSA401(k) with company match13 days PTO + 8 paid holidaysCompany-paid life insuranceTake-home vehicle + gas cardUniforms + cleaning serviceWeekly direct deposit Responsibilities: Troubleshoot, service, and repair residential HVAC systems with the support of full training, professional tools, and a strong leadership network. Qualifications: What You Need:3 years of residential HVAC Service experience is required.EPA certification (or ability to obtain)Valid driver’s license & clean driving recordMust pass background and drug screeningAbility to enter attics, crawlspaces, and lifting heavy equipmentIf you have the experience we seek, APPLY NOWNote: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will operate a lathe to machine parts and components for flow control valves, including shafts, plugs, seat ring, seat retainers, bodiesetc. The machinist will verify the quality of finished work with precision measurement tools (caliper, micrometer, bore gaugeetc). This is a second Shift position: Monday-Friday 4:00pm – 1:00am, including opportunity to work OT. Sometimes Saturdays and Sundays if the workload requires. There is a 5% shift differential. ** Must have experience with Mazatrol/Programming is a must. Responsibilities & Requirements: Inspect first articles and verify the quality of the finished work by using precision measurement tools and demonstrating an in-depth understanding of specifications and quality workmanship.Meet production goals relating to efficiency, schedules, and scrap/rework.Clean and maintain machines and tools and keep an organized workspace.Apply an understanding of the process flow of documents, materials, and parts through the manufacturing process.Work closely with other machinists to discuss and solve problems relating to repairs and equipment.Collaborate with inventory workers and engineers to status and discuss work-in-progress Preferred Experience / Skills: 5+ Years min experience on CNC machines; able to Mazatrol; Fanuc Control.Experience operating manual mills and lathes is a plus.Expertise required in machining 300-series stainless steel and other materials such as Hastelloy C276, Monel 400, iron nickel and high chrome alloys.Working knowledge of machine tooling and processing requiredSkill required in using and interpreting precision measuring instruments.Strong blueprint reading skills requiredPersonal commitment to quality workmanship, with an ability to assess and explain quality concern to othersAble to accurately and consistently follow detailed procedures in order.An eye for detail to check drawings, part numbers, and materials, and to correctly complete routers and other paperwork.Work collaboratively as part of a team, showing a professional attitude and a service-oriented mindset in a fast-paced, flexible environment.Demonstrated track record of reliable, on-time attendance, able to work overtime and weekends as required.Standing for long times required, repetitive arm motions, frequent lifting of 25 lbs with occasional lifting up to 50 pounds.Must be able to complete math problems quickly and accurately.High School diploma or equivalent. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-13315 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Powell is an engineer to order manufacturer of switchgear. We are seeking an experienced Industrial Maintenance Technician to join our team. The Maintenance Technician will perform routine and preventative maintenance and repair manufacturing and fabrication equipment, including CNC Laser Cutting and CNC Turret Punch Press equipment, Robotic Welding equipment, Automated Material Handling equipment, and Automated Powder Coat Painting equipment. 3rd Shift Schedule: Monday-Friday 10:00pm-6:15am plus OT Essential Responsibilities Reading assembly drawings, schematics, and equipment layouts.Maintaining, diagnosing, troubleshooting, and repairing electrical circuits. (occasional)Maintaining, diagnosing, troubleshooting, and replacing control devices.Maintaining, diagnosing, troubleshooting, and replacing hydraulic equipment, circuits and components.Maintaining, diagnosing, troubleshooting, and replacing pneumatic systems.Must be able to look up parts from equipment drawings, schematics and parts lists.Must be able to understand our Computerized Maintenance Management System (CMMS) and be able to conform to our work order procedures.Adhering to all plant safety and environmental guidelines, policies and procedures.Requires working with a wide variety of other job groups and involves working around traffic, heights, electricity, hydraulics, and heavy equipment including moving parts.Assisting crew members and working in a team environment. Minimum Qualifications Required Experience is Proportionate with the selected job level: The Industrial Maintenance Tech level 1 High School Diploma or General Education Diploma; associate degree in electrical technology preferred.Minimum of 1-2 years of experience in an industrial maintenance roleThe Senior Industrial Maintenance Tech High School Diploma or General Education Diploma; associate degree in electrical technology preferred.Minimum of -3-4 years of experience in an industrial maintenance role Skills, Abilities & Other Requirements Must be able to efficiently and effectively use a computer, CMMS and related software related to record-keeping and machine troubleshooting/maintenance.Strong mathematical ability is essential.Must be self-driven and able to drive organizational change.Must work well in a team environment.Must be willing to learn and perform with minimal direction.Must have mechanical and electrical knowledge.Must have basic computer skills: Microsoft SuiteMust be fluent in English with good written and verbal communication skills.Must have manual dexterity.Ability of strong mechanical aptitude.Ability to read mechanical and electrical schematics.Ability to troubleshoot and repair low voltage (12 v DC) – high voltage (480 v AC 3 Phase) electrical systems.Ability to visually and mentally make priority decisions and independent judgment calls based on the situation at hand.Ability to work long hours and weekends.Ability to operate hand and power tools, industrial machines, digital cameras, phones, scanners, tools, and controls in a safe manner.Ability to work and concentrate in a noisy environment. Working & Environmental Conditions Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities.Required to wear personal protective equipment (PPE) (i.e., safety shoes, hard hats, bump caps, safety glasses, hearing protection, safety harnesses as required) and respirators when required.Must be able to work from all types of ladders (step ladders, "A" frame ladders, etc.)Specific vision abilities required include close vision, distance vision, color perception, peripheral vision, depth perception, and ability to adjust focus, hand-eye coordination.Working at heights usually no higher than 20 feet in the air on an elevated structure using proper lift equipment and Fall Protection Equipment.Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs or step ladders.Bending the body at the waist, the legs at the knees, and extending arms and hands in any directionContinuous standing and walkingAble to use upper extremities frequently, work with both arms above shoulders and use both arms at full length frequently.Must be able to meet physical lifting demand up to 50lbs.Frequent use of hand tools and power tools More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. *Posted position does not provide visa sponsorship or relocation. #LI-KC1 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Company Name: ARS-Rescue Rooter Overview: Pay: $80-120k (Performance Pay Based)Earning potential over $100K/year based on performanceSchedule: FT-Weekend AvailibiltyFull-time, year-round workJoin ARS, the nation’s largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience.What We Offer:Insurance available after 31 daysLow-cost medical (as low as $5/week)Dental, vision, HSA/FSA401(k) with company match13 days PTO + 8 paid holidaysCompany-paid life insuranceTake-home vehicle + gas cardUniforms + cleaning serviceWeekly direct deposit Responsibilities: Troubleshoot, service, and repair residential HVAC systems with the support of full training, professional tools, and a strong leadership network. Qualifications: What You Need:3 years of residential HVAC Service experience is required.EPA certification (or ability to obtain)Valid driver’s license & clean driving recordMust pass background and drug screeningAbility to enter attics, crawlspaces, and lifting heavy equipmentIf you have the experience we seek, APPLY NOWNote: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Customer Product Repair Mechanic is responsible for all processes related to disassembly, repair, and assembly of pumps, including but not limited to rotating equipment, of high energy electric actuators, pumps, small compressors, and decoking equipment. The CPRM will work with team leaders to execute work as provided on work instructions, routers, drawings, and checklists. The CPRM independently selects and uses inspection equipment to check dimensions of all critical components during the assembly and repair process and gives a written description of the wear and condition of critical components. This position also ensures all forms and documentation are complete prior to submission of quotation. The CPRM will also be responsible for painting, installing all tagging, and prep the equipment prior to shipment to the customer. This could be a First shift or Second shift(6:00am-2:30pm) OR (4:30pm-1:00am)Monday-Friday. Overtime required when necessary. **NEW HIRES ARE ELIGIBLE FOR A $2500 SIGN ON BONUS!! Responsibilities & Requirements: Follow pre-job brief, Return Goods Policies, and checklists prior to DCI and assembly.Responsible for the dismantle, clean, and inspect processes of all pumps (repair or upgrade) and decoking equipment.Ability to independently inspect, repair, and assemble components and equipment, and accurately complete all required documentation.Take pictures of the DCI process as instructed on the DCI checklist; properly clean each component for reuse and write the condition of components on all DCI documentation.Interface with service coordinator, production planners, and customer to discuss the condition of all critical components when applicable.Follow all routers and assembly procedures.Inspect all components for critical fits and run-outs and document each number on the appropriate assembly form.Take pictures of the assembly process as instructed on the assembly check list.Significant experience with the proper and safe use of various common power and hand tools needed for assembly.Utilize torches (and other heat sources) and liquid nitrogen properly and safely in the assembly process.Run balance machine to proper balance rotating components and assemblies.Conduct low pressure air tests and high-pressure hydrostatic tests.Inspect and verify the quality of finished and in-process work with precision measurement tools (i. e. micrometers, dial indicators, calipers, etc.).Accurately set up and read precision measuring instruments such as micrometers, dial indicators, calipers, and other gauges.Ability to work efficiently within fixed time windows for each manufacturing process.Communicate clearly to peers and supervisors any related job issues.- Coordinate and interface with sales, operations, engineers, and customers as necessary.Paint when required, tag, and prep equipment prior to shipment to the customer.Utilize cranes, lifting devices, and fork trucks.Willing to provide input on work process improvement and on developing new tools and hardware as part of on-going Continuous Improvement projects.Work safely while helping colleagues work safely and utilize Stop Work Authority when appropriate.Ability to understand work instructions, safety procedures, and company policies Comply with all Flowserve policies and procedures.Must own set of personal SAE hand tools and measurement instruments (micrometers, dial indicators, calipers, etc.) and a roll-around toolbox. Able to read and interpret prints, shop drawings, assembly checklists, and other written work instructions.Basic computer skills including understanding of Microsoft Office PackageAbility to prioritize and manage multiple tasks in a fast-paced and changing work environment.Attention to detail and process-oriented mindset with results driven background.Electrical wiring experience or mechanical assembly experience Must be able to stand for long periods of time and lift up to 25 pounds with a full range of hand and upper-body motion to work with tools and parts.Must be able to work overtime, weekends, and holidays as the business dictates.Other duties as assigned. Preferred Experience / Skills: Experience with dismantling, cleaning, and inspecting pumps (repair or upgrade) and decoking equipment.Excellent communication skills both written and verbal.Excellent organizational skills, able to solve problems, and prioritize work assignments.Prior experience working in the fast-paced and unpredictable environment around repair servicesDemonstrate a desire for personal growth and career development.HS Diploma / GED and 3-5 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-15100 Job Family Group : Operations Job Family : OP Repair Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Powell Service Division is looking for a highly skilled and motivated Senior Service Technician interested in joining one of the nation’s leading providers of medium and low voltage switchgear. Powell Service Technicians are responsible for ensuring the end to end safety, quality and performance of Powell equipment across the US and Canada. This includes performing installations, preventative maintenance, corrective maintenance, and periodic supervision of small crews. The ideal candidate thinks critically, can work well independently, and is a problem solver. Senior service technicians are expected to service the west coast, gulf coast south, offshore and east coast service regions. Qualified Service Technicians are provided safety and technical training with full office support. Once qualified, Technicians are assigned a company vehicle, standard tooling, testing equipment, a laptop, smart phone, and company expense card.Essential Responsibilities Adhere to Powell’s current safety and quality standardsComplete all site documentation in a timely manner; including but not limited to, weekly time sheets, signed service and repair order, materials used and report writing.Provide regular and clear communication regarding work schedule to Field Operations Scheduler and District Service ManagerMaintain flexible work hours, which will include over time and periodic weekend supportMust be available to travel up to 85% of the year.Comply with Powell‘s standard operating procedures, documentation processes, safety processes and protocols.Coordinate with Powell Project management, customers, vendors, and labor support in a professional and customer-centric mannerAble to work in different roles from supporting the Manufacturing Department within house fabrication, to overseeing small crews on installation projects.Switchgear and PCR installationsDC / AC SwitchgearPerform performance testing on Powell equipment and components, including but not limited to; insulation testing (megger testing), Ductor, Hi Potential testing, torque tests and mechanical / functional testing.Perform regular inspections of any issued vehicle or calibrated equipment/tools.Provide support to services manufacturing group. May consist of construction, installation, wiring and testing.Duties will include local and domestic travel, PCR installation, switchgear installation, PowlVac breakers, also trouble shooting, testing and repair of mentioned items. Minimum Qualifications Field service technicians are required to have 4 years as a shop and / or field electrical / breaker technician.Exhibit basic knowledge of Electrical Industry manufacturing standards. Specific standards include sections of ANSI IEEE C37 applicable to the design and manufacture of breakers and switchgear.Basic knowledge of the following: ANSI IEEE device function numbers; ampacities of electrical conductors in switchgear applicationsBasic knowledge of electrical air and surface creepage clearance requirements.Basic knowledge in writing accurate and complete test reports, project summaries and has the ability to explain basic anomalies found on a given project. Preferred Qualifications Basic familiarity with contactor and circuit breaker schematics (Preferred).Basic understanding of hi potential testing (Preferred)Basic understanding of low resistance testing (Preferred).Basic working knowledge of mechanical and electrical functional testing of circuit breakers and electrical switchgear (Preferred).NICET Level 1 certification (Preferred).HUET / Offshore Survival Training (Will be provided if the candidate is not currently certified).NFPA 70E Trained (Preferred / Training can be provided).OSHA 10 / 30 Trained (Preferred / Training can be provided) Skills, Abilities & Other Requirements Demonstrate basic knowledge in the design and manufacture of bus and structural modification projects.Demonstrate knowledge of basic electrical theory and control circuits i.e.: Ohm's Law; Basic AC and DC theory.Ability to assist other senior level technicians with maintenance, repair, installation, upgrades and retro fills on Powell switchgear and power control rooms Working & Environmental Conditions Working Environment The Field Service Technician typically performs duties in an industrial environment. This position requires services both locally and across the Continental US. It is the policy of Powell Service Division to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand, talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. Additional requirements are as follows: Medium physical effort (lifting/moving up to 50 pounds)Have full range of mobility in upper and lower body and be able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling and squatting for extended periods of time.Work at heights greater than 10’.Work on ladders of all types.Work on scissors and bucket lifts (on occasion). In addition, employees will be required to complete and pass Company and Customer required drug screening, background and employment verification checks, maintaining eligibility throughout employment. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. #LI-BH3 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: We are seeking a Maintenance Mechanic for one of our manufacturing plants. The Maintenance Mechanic will be responsible for maintaining, troubleshooting and repair of a variety of CNC machines, test equipment, parts washers, and others. Emphasis will be placed on electrical repair aptitude, as the Maintenance Mechanic will need to effectively troubleshoot items such as servo drives and electrical switches. This is a First Shift Opportunity- Monday-Friday 6:00am-2:30pm. Responsibilities & Requirements: Troubleshoot, operate, install, and program panel views and HMI devicesTroubleshoot and repair valve testing equipmentDiagnose and repair mechanical failures on ovens, blowers, and fansVerifies alignment and tolerances of moving parts, tests operations of assembliesLayout, measure, size, bend and install electrical conduitTroubleshoot and program AC/CD drives and motorsEffectively troubleshoot relay logic circuits – requires experience with gas train circuitryEffectively troubleshoot, size, and install transformersEffectively lays out, measures, threads, and installs pipeTroubleshoot and repair processed water systemTroubleshoot and repair hydraulic systemsTroubleshoot and repair injection molding equipmentUse precision measuring tools, voltmeters, ammeters, and oscilloscopesApply knowledge and understanding of machining controls, troubleshooting, and programming skillsTroubleshoot ladder logic programsTroubleshoot machine heating controls, i. e. controllers, heaters, molds and solid-state relaysOther duties as assigned Preferred Experience / Skills: Technical training in electrical maintenanceAble to read blueprints and specificationsHands-on experience in the manufacturing industryExperience diagnosing/repairing mechanical industrial equipment, such as lathes, milling machines, CNC etc.; includes use of precision measuring tools and testing equipmentGood understanding of electrical systems including 3 phaseBasic knowledge of plumbing and pneumatic controlsMust be willing to learn new skillsAbility to determine material needs and specifications for projectsCreates detail bill of materials (BOMs) for projectExperience operating machinesBackground with PLCExperience with machine heating controlsHS Diploma / GED and 3-5 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-15454 Job Family Group : Operations Job Family : OP Maintenance Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: We are seeking a Maintenance Mechanic for one of our manufacturing plants. The Maintenance Mechanic will be responsible for maintaining, troubleshooting and repair of a variety of CNC machines, test equipment, parts washers, and others. Emphasis will be placed on electrical repair aptitude, as the Maintenance Mechanic will need to effectively troubleshoot items such as servo drives and electrical switches. This is a First Shift- Monday-Friday 6:00am-2:30pm Responsibilities & Requirements: Troubleshoot, operate, install, and program panel views and HMI devicesTroubleshoot and repair valve testing equipmentDiagnose and repair mechanical failures on ovens, blowers, and fansVerifies alignment and tolerances of moving parts, tests operations of assembliesLayout, measure, size, bend and install electrical conduitTroubleshoot and program AC/CD drives and motorsEffectively troubleshoot relay logic circuits – requires experience with gas train circuitryEffectively troubleshoot, size, and install transformersEffectively lays out, measures, threads, and installs pipeTroubleshoot and repair processed water systemTroubleshoot and repair hydraulic systemsTroubleshoot and repair injection molding equipmentUse precision measuring tools, voltmeters, ammeters, and oscilloscopesApply knowledge and understanding of machining controls, troubleshooting, and programming skillsTroubleshoot ladder logic programsTroubleshoot machine heating controls, i. e. controllers, heaters, molds and solid-state relaysOther duties as assigned Preferred Experience / Skills: Technical training in electrical maintenanceAble to read blueprints and specificationsHands-on experience in the manufacturing industryExperience diagnosing/repairing mechanical industrial equipment, such as lathes, milling machines, CNC etc.; includes use of precision measuring tools and testing equipmentGood understanding of electrical systems including 3 phasesBasic knowledge of plumbing and pneumatic controlsMust be willing to learn new skillsAbility to determine material needs and specifications for projectsCreates detail bill of materials (BOMs) for projectExperience operating machinesBackground with PLCExperience with machine heating controlsHS Diploma / GED and 5-7 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-15451 Job Family Group : Operations Job Family : OP Maintenance Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.