Job Description: Quality Assurance SpecialistIMMEDIATELY HIRING! Quality Assurance Specialist FULL-TIME Opportunity in Remote, TXStarting Wage: $41.00-$47.00/hr DOERemote potential after 10 week training period and evaluationThe Quality Assurance Specialist will perform their duties and responsibilities in support of the company’s 14 CFR Part 135 Air Carrier Certificate. This role requires the specialist to possess strong quality assurance attributes and the ability to focus on the minute details of complex technical matters and the associated technical data. The specialist must have the experience and knowledge necessary to apply the appropriate standards to ensure company aircraft are maintained and modified in accordance with the relevant data and applicable regulatory requirements. The Quality Assurance Specialist will report directly to the Quality Assurance Manager.ResponsibilitiesDevelop, revise, and administer Aircraft Minimum Equipment Lists (MEL).Develop, revise, and administer FAA Approved Aircraft Inspection Programs (AAIP).Develop and administer aircraft Master Inspection Lists (MIL) compiling all inspections, scheduled maintenance, overhaul, and service life limitation requirements IAW the aircraft and engine manufacturer’s technical source documents.Create aircraft Configuration Control Documents (CCD) by researching aircraft records and inputting relevant data into the Master Inspection Lists (MIL). Maintain the CCD by updating sections with new requirements from revised source documents and reflecting aircraft configuration changes due to modifications and equipment updates.Administer aircraft maintenance tracking programs to include performing revisions and gap audits to manufacturer’s technical source documents and applying corrections, as necessary.Monitor new and recurring FAA Airworthiness Directives and manufacturer’s service bulletins. Interpret and communicate complex technical data to guide field technicians in performing appropriate corrective actions.Perform aircraft acceptance inspections after heavy maintenance and modification work scopes; verify conformity of alterations on new and refurbished aircraft completed for Emergency Medical Service (EMS) operational configurations to FAA approved design data.Ensure aircraft conformity to certification and operational regulatory requirements by generating substantiating document packages. This process is essential for obtaining FAA approval to add aircraft to Guardian Flights FAR Part 135 air carrier certificates.Administer Aircraft Weight and Balance program and Equipment Lists.Audit aircraft maintenance records and generate work scopes for aircraft major maintenance and modification events.Perform technical and regulatory oversight of major repairs and major alterations applied to company aircraft.Support the Records Department by reviewing aircraft return-to-service documentation, parts certifications, and major repair and alteration records to ensure compliance with regulatory requirements.Assist field technicians interpreting complex technical data and regulatory compliance matters.Support the Director of Maintenance in managing fleet aircraft as directed. Fulfill additional responsibilities assigned by the Quality Assurance Manager.Minimum Required QualificationsHigh School Diploma, GED, or equivalent.FAA Airframe & Powerplant License.A minimum of 5 years’ relevant experience with a 14 CFR Part 135 air carrier or Part 145 certified repair station preferably in a quality assurance or technical support role.Experience in aircraft operations, with exposure to Beechcraft King Air and Pilatus PC12 series turboprop aircraft highly desirable.Ability to interpret, apply, and effectively communicate complex technical data and processes associated with aircraft maintenance and alterations.Initiative-taking and meticulous focus on quality, safety, and regulatory compliance.Possess honesty, integrity and a commitment to safety and regulatory compliance.Possess excellent listening, verbal and written communication and critical thinking skills.Ability to work in a rapidly evolving and dynamic environment.Possess a strong work ethic, customer service skills, and the ability to communicate effectively both in writing and verbally.Ability to work in a team environment with an eagerness to contribute to the overall success of the Maintenance department and the Company.Must be proficient in a dynamic computerized working environment, performing administrative tasks using Microsoft Office Suite programs, web-based maintenance management programs, and Enterprise Resource Planning (ERP) systems.Ability to be onsite for the first 10 weeks of employmentPreferred QualificationsBachelor’s degree in aviation management, Maintenance or Technology or a related field or equivalent combination of education and experience.FAA Airframe & Powerplant License with Inspection Authorization.A minimum of 10 years’ relevant experience with a 14 CFR Part 135 air carrier or Part 145 certified repair station preferably in a quality assurance or technical support role.Extensive firsthand experience in performing maintenance and alterations on Beechcraft King Air and Pilatus PC-12 series turboprop aircraft is highly desirable. A strong background in working with these specific aircraft models, demonstrating proficiency in maintaining, troubleshooting, and modifying their systems to ensure optimal performance and safety.Experience working with FAA Aircraft Safety Inspectors for applying major alterations on aircraft certificated under 14 CFR parts 23, 25 and 27.Experience processing aircraft documents packages for FAA conformity inspections for adding aircraft to an air carrier certificate.Experience developing and administering FAA Approved Aircraft Inspection Programs (AAIP) and Minimum Equipment Lists (MEL).Why Choose Guardian As a quality air medical transport service,Guardian Flightis one ofGlobal Medical Response’s(GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the worldatwww.AtaMomentsNotice.com. Learn how ourvaluesare at the core of our services and vital to how we approach care and check out our comprehensive benefit options atGlobalMedicalResponse.com/Careers. EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Check out our careers site benefits page GMR Benefitsto learn more about our comprehensive benefit options, which include medical, vision, dental, 401k, disability, FSA, HSA, EAP, vacation and paid time off.

SUMMARY: Define, develop, and oversee the implementation of new manufacturing processes primarily for Raytheon connectors and cable assemblies or improvements to existing manufacturing processes, maintaining high levels of manufacturing and product quality while ensuring cost-efficiency and conformance with regulatory standards.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Work closely with Raytheon design engineering on new products and special manufacturing process requirements.Review Supplier Statement of Work (SSOW) for compliance and, where needed, implementation of new procedures / processes in order to meet SSOW requirements.Assist with developing cost / pricing strategy for SSOW compliance requirements related to design and manufacturing engineeringEvaluating existing processes and identifies areas for improvementAssist the Quality Engineering with determining root cause in problem analysis and implementing solutionsAnalyze process plans, determining lean-based layouts and work force planning/utilization for maximum efficiencyAssist the Quality Engineering with complete detailed, documented process qualification procedures, including PFMEAs, Quality Control Plans, First Article Inspection Requirements, and Capability Studies.Developing and implementing cost savings and quality improvement projectsUtilize PTC Creo to design simple tooling, jigs and fixturesDevelop, write, and communicate Statements of Work for complex capital purchasesConduct detailed, on-site vendor assessments and auditsProvide Design for Manufacturability review and feedback to product engineering on new product designsDetermine accurate manufacturing costs for new process implementations or improvements and update manufacturing systems with accurate data for planning and accountingIdentify and implement cost savings, calculating anticipated savings and return on investmentUtilize Lean and Six Sigma techniques in all aspects of qualification and problem solvingInterface with customers and organizational bodies as manufacturing engineering representative during customer visits and auditsMust perceptive to direct and indirect impact of proposed solutions on quality, cost, and operator satisfaction and can easily express those values of proposed solutions to all levels in the organization.KNOWLEDGE, SKILLS, AND ABILITIESRequires the knowledge typically acquired through:Completion of a four year Bachelor’s degree or equivalent;Two to three years related experience and/ or training; or equivalent combination of education and experience.Technical writingPresentation skills, with the ability to tailor the message to the audienceLean MethodologiesSix Sigma and related technical problem solving toolsDigital Factory connectivity Ability to write articles for publication that conform to prescribed style and format and effectively present information to top management.Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 5%.[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

Job Description: To become the world’s greatest baker, we need the world’s greatest team membersOverviewAs a team member, the Production Line Leader leads a team of Machine Operators to control and monitor a fast-paced, high-volume food production line. They prioritize personnel and food safety at all times.What FGF OffersFGF believes in Home Grown Talent, accelerated career growth with leadership training, unleashing your potentialCompetitive Compensation, Health & Welfare Benefits including Vision & Dental and flexible options at competitive premiums401k matching programDiscount program - Restaurants, gyms, shopping, etc.Tuition reimbursementResponsibilitiesLead by example and foster an environment of mutual respect and teamworkFollow and enforce Company standards, at all times, to ensure a safe working environment is maintained Check throughout shift to ensure that methods are meeting quality, safety, and environment standardsConduct pre-shift huddles and provide feedback for Team MembersLead, coach, and mentor Team Members on one or more production linesEnsure production schedules are met and problems are worked outCoordinate the various department schedules, products, and manpower to ensure production runs smoothlyAssist in testing of new equipment, methods and or productsTrouble shoot issues with processes and equipmentUtilize the OMS system to help achieve production targetsProvide input on staffing levels and participate in sourcing and interviewing candidatesComplete Performance Evaluations, with constructive feedback, for Team MembersAct as backup to Shift Leader when necessaryRequirements3-5 years of experience working in a manufacturing environment critical (food / bakery experience is desirable)Must be a demonstrated leader and motivatorMust have excellent interpersonal, organizational, communication, and mathematical abilitiesAble to manage stress and personnel issuesTrustworthy and able to work independently with minimal supervisionMust be a creative problem solver (think outside the box)Flexible to workdays, afternoons, nights & weekends if neededMust have working knowledge of GMP's, HACCP & O.H.S.A Must have strong computer skills, including Microsoft Office (Excel, Word, Outlook) Post-secondary education is an assetFlexible to workdays, afternoons, nights & weekends if neededWhat is the recipe for a great career at FGF Working at FGF Brands, there is never a dull moment! FGF is a leading North American bakery company with facilities across the USA and Canada with a specialized focus across all key bakery categories, including naan, muffins, croissants, donuts, cakes, artisan breads and flatbreads.As an innovative company that is continually growing there is always challenging yet rewarding work to be a part of. We have an entrepreneurial spirit that encourages all our Team Members to use their own creativity and out-of-the-box thinking to come up with solutions and new ideas. Job Family: Production Job Level: A-MFG

SUMMARY: Define, develop, and oversee the implementation of new manufacturing processes primarily for Raytheon connectors and cable assemblies or improvements to existing manufacturing processes, maintaining high levels of manufacturing and product quality while ensuring cost-efficiency and conformance with regulatory standards.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Work closely with Raytheon design engineering on new products and special manufacturing process requirements.Review Supplier Statement of Work (SSOW) for compliance and, where needed, implementation of new procedures / processes in order to meet SSOW requirements.Assist with developing cost / pricing strategy for SSOW compliance requirements related to design and manufacturing engineeringEvaluating existing processes and identifies areas for improvementAssist the Quality Engineering with determining root cause in problem analysis and implementing solutionsAnalyze process plans, determining lean-based layouts and work force planning/utilization for maximum efficiencyAssist the Quality Engineering with complete detailed, documented process qualification procedures, including PFMEAs, Quality Control Plans, First Article Inspection Requirements, and Capability Studies.Developing and implementing cost savings and quality improvement projectsUtilize PTC Creo to design simple tooling, jigs and fixturesDevelop, write, and communicate Statements of Work for complex capital purchasesConduct detailed, on-site vendor assessments and auditsProvide Design for Manufacturability review and feedback to product engineering on new product designsDetermine accurate manufacturing costs for new process implementations or improvements and update manufacturing systems with accurate data for planning and accountingIdentify and implement cost savings, calculating anticipated savings and return on investmentUtilize Lean and Six Sigma techniques in all aspects of qualification and problem solvingInterface with customers and organizational bodies as manufacturing engineering representative during customer visits and auditsMust perceptive to direct and indirect impact of proposed solutions on quality, cost, and operator satisfaction and can easily express those values of proposed solutions to all levels in the organization.KNOWLEDGE, SKILLS, AND ABILITIESRequires the knowledge typically acquired through:Completion of a four year Bachelor’s degree or equivalent;Two to three years related experience and/ or training; or equivalent combination of education and experience.Technical writingPresentation skills, with the ability to tailor the message to the audienceLean MethodologiesSix Sigma and related technical problem solving toolsDigital Factory connectivity Ability to write articles for publication that conform to prescribed style and format and effectively present information to top management.Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 5%.[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

SUMMARY: Manages and supervises the Manufacturing Engineering department and oversees facilities.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Plans and formulates aspects of research and development proposals such as objective or purpose of project, applications that can be utilized from findings, costs of project, and equipment.Reviews and analyzes proposals submitted to determine if benefits derived and possible applications justify expenditures.Approves and submits proposals considered feasible to management for consideration and allocations of funds.Develops and implements methods and procedures for monitoring projects such as preparation of records of expenditures and research findings, progress reports, and staff conferences, in order to inform management of current status of each project.Negotiates contracts and selects vendors to perform development and fabrication of automation, tooling, and services used in the manufacturing processes.May be required to manage the Tool & Die department including the planning of project and work schedules, equipment, repair and maintenance assistance, and other resources.Performs other tasks and duties that are related to the Manufacturing Engineer job description.May be required to manage the patent liaison work that is retained from legal firms. Oversees facilities projects and maintenance.KNOWLEDGE, SKILLS, AND ABILITIESRequires knowledge typically acquired through:Completion of a Bachelor’s Degree from a four year college or university;Five to seven years related experience or training; and/or equivalent combination of education and experience.Ability to read, analyze, and interpret common scientific and technical journals, financial reports and legal documents.Ability to respond to common inquiries or complaints from customers and regulatory agencies.Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis.Ability to effectively present information and respond to questions from groups of managers, clients, customers, employees and the general public.Requires ability to define problems, collect data, establish facts, and draw valid conclusions.Requires ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 10%. [Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

We are looking for Part-Time Night Trash Collectors to join us! Having your own truck is required.
Are you interested in a part-time opportunity to earn extra income in the evenings? Do you like working outdoors and staying active? If so, you may be a good fit for our Apartment Trash Collector position.
Valet Living is hiring for a Part Time Apartment Trash Collector (Service Valet) to work during the evening hours in your local area. This is a great paying, part time job that is a great way to earn extra money or supplement income while working another job.  You’ll enjoy working outdoors, on your own, in a stress-free environment and get a workout while you do this job.  We are an essential business that continues to grow, and our associates benefit from reliable hours, consistent pay, and promotional advancement opportunities.
We offer an immediate start date and provide hands-on, paid training.  No experience is necessary.
Collect trash and recycling bags door to door within a local apartment community and take these items to the trash compactor or dumpster on the property site (no large or bulk items and no offsite driving and/or dumping) Typically work 5 nights a week from Sunday through Thursday. Enjoy weekends off! Work 2-4 hours per night, start time is either 7:00pm or 8:00pm and you are done between 10:00 pm - 11:00 pm (some positions may have earlier start/end times and Sundays may require more hours) Part time hours working 10-15+ hours per week
Benefits: Great pay - pickup truck owners and vehicles using trailers will receive the higher part of our pay range. Get paid as you earn using EarnIn**. All driving is done while on community property – no offsite driving or dumping. Paid training and opportunity for growth within the company Employee referral bonus program – get paid for your referrals Earn reward incentives through our recognition program Tuition reimbursement Stay physically fit while working outdoors **EarnIn is a mobile app that gives people access to their money as they earn it – without waiting for payday.
Qualifications: Must be at least 18 years of age Ability to work indoors or outdoors in changing weather conditions Ability to lift and transport up to 50 lbs. A smart phone with data plan to access our mobile app An open bed pickup truck or vehicle with trailer is preferred A valid driver's license is preferred Current auto insurance in your name for your vehicle, or listed as a driver on policy is preferred
Safety statement: Socially distanced work environment All required Personal Protective Equipment (face covering, gloves, safety vest, etc.) is provided free of charge Our processes exceed the CDC and OSHA guidelines on COVID-19 safety Zero reported occupationally transmitted cases of COVID-19 Dedicated team of occupational health & safety professionals that manage all aspects of associate safety, including COVID-19 protocols.
Valet Living is an Equal Opportunity Employer that values the strength diversity brings to the workplace. We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law.

Overview: “TexPTS truly listens to its employees and also provides us autonomy rather than being a puppet on a string. I took this job not entirely knowing what I was getting in to, and it’s been the best career move I’ve ever made.” -Jordan Mazick PT, DPT, OCSPhysical TherapistJob Type: Full TimeSalary: $72,000-90,000/ YearJob Location: Gruene - 960 Gruene Rd New Braunfels TX 78130Potential Sign On Bonus of up to $5,000 available!How TexPTS and Confluent Health Supports You:Student loan repayment program – We pay your lender monthly! IRS approved. Value increases after two years of employment!Fully paid trainings, certifications and education programs through Evidence in Motion (EIM)Orthopedic and Sports Residency programs through TexPTS – Company paid! $15k ValueAverage less than 12 patients per dayWeekly bonus based on patient volumeA focus to create a diverse, equitable, and inclusive workplace cultureComprehensive mentorship and career developmentLeadership and talent development opportunitiesGenerous Paid Time OffIndustry leading Medical, Dental, Vision, LTD insurances401(k) Employer MatchingFamily Building and Parental Benefits*Part-time and PRN employees are only eligible to participate in the 401(k) benefit. Responsibilities: You’ll achieve success by:Delivering outstanding care in an outpatient setting, utilizing the latest evidence-based methodsReviewing patients' medical historyDiagnosing patients by observing their movements and listening to their concernsDeveloping individualized treatment plans for patientswith clear goals and expected outcomesUsing exercises, stretching, equipment, and hands-on manual therapy to manage patients’ pain, increase mobility, and prevent further pain and injuryRecording patient progress and modifying the plan of care as needed Qualifications: Physical Therapist Licensure in good standing in the state of Texas or currently pursuing a Doctor of Physical Therapy DPT degreeWho We Are: For 20 years, Texas Physical Therapy Specialists (TexPTS) has been helping people return to their work, life, and play without pain. We are recognized leaders in orthopedic and sports physical therapy, with the highest number of Board Certified Specialists in the field. As part of the Confluent Health family, we’re committed to empowering the next generation of physical therapists. TexPTS is a member of the Confluent Health family of physical and occupational therapy companies. Together, we are transforming healthcare by strengthening private practices and developing highly effective clinicians all across the country.Voted “Best Places to Work” 2023, 2024 & 2025! 4+ star employer as rated on Glassdoor!Use the link to see what our team members are saying! https://www.glassdoor.com/Overview/Working-at-Texas-Physical-Therapy-Specialists-EI_IE785278.11,45.htmConfluent Health and Texas Physical Therapy Specialists provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Confluent Health and TexPTScomplies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.#CH500

Overview: “TexPTS truly listens to its employees and also provides us autonomy rather than being a puppet on a string. I took this job not entirely knowing what I was getting in to, and it’s been the best career move I’ve ever made.” -Jordan Mazick PT, DPT, OCSPhysical TherapistJob Type: Full TimeSalary: $72,000-90,000/ YearJob Location: San Antonio, TX - Westover Hills, Tezel, Deerfield, Castle Hills, Kallison Ranch, Medical Center, Wilderness Oak, Stone Oak, Live Oak, City Base, Oak Run, and more!Potential Sign On Bonus of up to $10,000 for select positions!How TexPTS and Confluent Health Supports You:Student loan repayment program – We pay your lender monthly! IRS approved. Value increases after two years of employment!Fully paid trainings, certifications and education programs through Evidence in Motion (EIM)Orthopedic and Sports Residency programs through TexPTS – Company paid! $15k ValueAverage less than 12 patients per dayWeekly bonus based on patient volumeA focus to create a diverse, equitable, and inclusive workplace cultureComprehensive mentorship and career developmentLeadership and talent development opportunitiesGenerous Paid Time OffIndustry leading Medical, Dental, Vision, LTD insurances401(k) Employer MatchingFamily Building and Parental Benefits*Part-time and PRN employees are only eligible to participate in the 401(k) benefit. Responsibilities: You’ll achieve success by:Delivering outstanding care in an outpatient setting, utilizing the latest evidence-based methodsReviewing patients' medical historyDiagnosing patients by observing their movements and listening to their concernsDeveloping individualized treatment plans for patientswith clear goals and expected outcomesUsing exercises, stretching, equipment, and hands-on manual therapy to manage patients’ pain, increase mobility, and prevent further pain and injuryRecording patient progress and modifying the plan of care as needed Qualifications: Physical Therapist Licensure in good standing in the state of Texas or currently pursuing a Doctor of Physical Therapy DPT degreeWho We Are: For 20 years, Texas Physical Therapy Specialists (TexPTS) has been helping people return to their work, life, and play without pain. We are recognized leaders in orthopedic and sports physical therapy, with the highest number of Board Certified Specialists in the field. As part of the Confluent Health family, we’re committed to empowering the next generation of physical therapists. TexPTS is a member of the Confluent Health family of physical and occupational therapy companies. Together, we are transforming healthcare by strengthening private practices and developing highly effective clinicians all across the country.Voted “Best Places to Work” 2023, 2024 & 2025! 4+ star employer as rated on Glassdoor!Use the link to see what our team members are saying! https://www.glassdoor.com/Overview/Working-at-Texas-Physical-Therapy-Specialists-EI_IE785278.11,45.htmConfluent Health and Texas Physical Therapy Specialists provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Confluent Health and TexPTScomplies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.#CH500

Overview: Work for a company that is truly making the world a happier place, one smile at a time! At Benevis, we create over a million smiles a year in the communities we serve and believe that every person deserves access to quality, affordable dental care. This mission drives everything we do! With over 3000 employees in offices across the country from clinical to support staff - we are united in our mission to create happy, healthy smiles through providing high quality dental care to underserved families in a fun, compassionate environment. Are you ready to join us in creating our next million smiles We have JUST the opportunity for you.We are actively seeking a Traveling Associate Dentist to join our growing team. Support our mission to provide excellent dental care in the community and help us create more smiles and memorable experiences for children and adults. Join a team that believes in teamwork and truly cares about their patients. Find your opportunity to make an impact: Take care of your community while participating in activities to promote a positive image of the company! Join in morning huddles (hey, you can even run one!), plan your day and let your team know how much you appreciate them, highlight great examples of customer focus, collaboration, meeting goals, etc. Love working with kids (they make up 70% or more of our patient base) Responsibilities: Traveling Associate Dentists are responsible for providing dental services to patients with the support of their team. Hold staff to the highest integrity by adhering to all government regulations, company standards, and company compliance programs. Other duties as assigned Our practice has: DentaPro software Digital x-ray and Panorex units Fiber-optic handpieces Yearly OSHA and HIPPA and Emergency Management training Ratio of 1 hygienist, 1 hygiene assistant, 2 dental assistants per provider Patient Base: primarily ages 3-21 and up to 30% adult population (depending upon location) Office flow: average 10-12 operative patients and 20-25 hygiene patients State insurance plans, PPO and out-of-network payor mix Qualifications:We expect you to have: DDS/DMD from a dental education program accredited by the Commission on Dental Accreditation Current, valid license to practice dentistry in states where providing care or eligible for licensure Other certifications as required - CPR, DEA, etc. Nitrous Oxide certification (only LA, MS, DC, TX, MA) Compassion and a strong desire to provide dental care to both children and adults This opportunity provides: Earn an additional $400 each week for traveling to other offices within your geographic area - all expenses paid (hotel, mileage, meals) Growth and development through mentoring and collaboration Attractive sign-on bonuses and student loan repayment assistance up to $1000/month may be offered for specific locations What we offer: Guaranteed biweekly salary during ramp period OR a percentage of collections No lab fees FT providers are eligible to participate in Medical/Dental/Vision insurance plans, HSA/FSA Short Term Disability/Long Term Disability and Basic Life Insurance plans are paid for by company 401(k) Retirement Plan with Company match Company paid malpractice insurance coverage Paid holidays and time off Continuing Education reimbursements CE offered through ADA Accredited Continued Education Recognition Program (C.E.R.P) Reimbursements for associated licenses, certifications and professional dues such as ADA and/or AAPD memberships Multiple schedule options to help maintain a healthy work/life balance VISA and Green Card sponsorship available We value teamwork, mutual respect and cooperation. We do not practice unlawful discrimination, including harassment or tolerate it in our workplace. What do we mean by discrimination We mean that we do not discriminate on the basis of race, color, creed, religion, sex, national origin, age, citizenship, disability, sexual orientation or any other characteristic protected by federal, state, or local law.