Overview: Join our team of passionate automotive technicians, where your skills are not only valued but also cultivated for long-term growth. Here's why AutoNation is the ultimate destination for automotive professionals:Paid Training Opportunities: Elevate your expertise with paid training, unlocking new levels of success and earning potential on our technician wage grid.Generous PTO/Vacation Policy: Enjoy a comprehensive paid time off policy for a healthy work-life balance.Defined Career Paths: Experience a workplace with structured career paths, offering clear milestones and opportunities for advancement.Comprehensive Health Insurance Options: AutoNation prioritizes your well-being with robust health insurance options for you and your loved ones.Drive a Strong Customer Pay Business: Join a team focused on driving a strong customer pay business where your expertise contributes to exceptional customer experiences.Are you ready to transform your job into a thriving automotive career With over 250 locations coast to coast, at AutoNation we don't just offer employment; we craft pathways for your success. Ready to accelerate your career Apply now and be part of a dynamic team that's driving success on and off the road!Position Overview:At AutoNation, getting customers back on the road is what drives us. We’re looking for a Collision Body Technician or Auto Body Technician to join our team. As a Collision Body Technician, you’ll perform vehicle repairs as assigned in accordance with dealer and factory standards. Your attention to detail make you a valuable asset to the team as you ensure repairs are completed on time, and deliver top-notch work to delight our customers.What are the daily job responsibilities Performing work as outlined on repair orders with efficiency and accuracy. Communicating with Estimators and Parts Associates to obtain necessary parts. Assessing vehicle condition to determine if additional safety or repair work is needed. Performing all body repairs according to estimate. Performing welding, soldering, body alignment, and frame/unibody repairs. Operating all equipment in the Collision Center in a safe and productive manner, following AutoNation’s Safety Standards for the use of personal protective equipment (e.g., safety glasses, gloves, hearing protection) while working on the production floor.Inspecting all work performed as a Quality Control (QC) measure as soon as jobs are completed. Mixing all chemicals according to manufacturer directions/specifications. Understanding and following federal, state, and local regulations that affect Collision Center operations, such as hazardous waste disposal, OSHA guidelines, etc. Gaining superior product knowledge to provide high quality repairs.What are the requirements for the Collision Body Technician ICAR certification (preferred) or interest to become certified.OEM certification (preferred) or interest to become certified.At least two years’ automotive experience. Must have a valid, in-state driver’s license with an acceptable, safe driving record. Ability to operate an automobile.What are the opportunities for career growth Our Associates have many choices for career growth and development after success in a Collision Body Technician role.Future opportunities may include:Collision DirectorCollision Production ManagerCollision EstimatorCollision Body Team LeadThe intent of this job description is to provide a representative summary of the major duties and responsibilities performed by incumbents of this job. Incumbents may be requested to perform job related tasks other than those specifically presented. Career opportunities are dependent on business and staffing needs, as well as the qualifications of internal and external candidates. Company OverviewAutoNation, a provider of personalized transportation services, is driven by innovation and transformation. As one of America's most admired companies, AutoNation delivers a peerless Customer experience recognized by data-driven consumer insight leaders, Reputation and J.D. Power. Through its bold leadership and brand affinity, the AutoNation Brand is synonymous with "DRVPNK" and "What Drives You, Drives Us." AutoNation has a singular focus on personalized transportation services that are easy, transparent, and Customer-centric.BenefitsClick here to learn more about our Benefits.Join us as we pave the way to moving our company, our communities and our industry forward. Apply today at a location near you or wherever you dream the road will take you.AutoNation is an equal opportunity employer and a drug-free workplace.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time - 10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doUnder direct supervision of the Area Resource Manager (Customer Service Dispatch Supervisor), receives and schedules customer calls for service. Manages schedule of assigned technicians and mechanics. Ensures schedule allows for timelycompletion of preventative maintenance and aligns with monthly forecasting goals. Debriefs activities of assigned technicians/mechanics daily, coordinating with technicians/mechanics to resolve concerns quickly. Partners effectively with the Service Team Manager to ensure technical service work is completed in a reasonable timeframe and to the customer’s expectations. Analyzes and assesses technical team performance and adjusts as needed to enhance customer satisfaction in a cost-effective manner. Assesses job completion and collaborates with Customer Billing Coordinators and Customer Support Coordinators to progress completed jobs through the appropriate businessprocess.How you will do itCandidate will work a 7:30 am to 4:30 pm shift which includes 1-hour lunch. This is not a remote position; you will be onsite.Receives customer requests for unscheduled or scheduled service.Coordinates labor scheduling to align technician to the appropriate customerand service need.Communicates the action plan and services to be provideddirectly to the customer.Ensures work has been performed to the customer’s expectations and performs follow-up with the customer, as needed.Answers any customer inquiries and resolves or escalates customer issues, as appropriate.Debrief activities daily.Ensures Technicians are provideddaily schedules. Maintains consistent communication with assigned Technicians. Follows up on activities to ensure completion in an established timeframe.Ensures that all customer account information requiredto support call management activities and scheduling of tasks are kept up to date in NxGen.Scheduled Service Visits – on timeParts ordering/PO creation supportStart-up supportCustomer PO confirmationWIP ManagementReconcile exceptions (SIR and AP)Attend weekly planning/scheduling meeting.Assistwith monitoring of time and expense reporting submissionReview and correct unassociated time for timesheets for technicians.Other duties and administrative activities as assigned.What we look forRequiredHigh school diploma or equivalent required.Must demonstratethe ability to perform work independently and demonstratesolid organizational and attention to detail skills.Must have strong interpersonal skills to effectively communicate with both internal and external clients. Must have the ability to simultaneously handle a large and diverse number of projects, tasks and issues with tact, cooperation, and persistence.Able to prioritize work activities based upon financial impactto desired business goals.Able to influence diverse teams to accomplishtasks/goals.PreferredTwo to five years of service industry experience and/or service scheduling.Associatedegree preferred.Experience and/or basic project accounting or costing principles is desired.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Company: Gerber Collision & GlassWELCOME TO GERBER COLLISION & GLASSOur Team Members Drive Us! Gerber Collision & Glass is one of the largest collision repair companies in North America. With $2+ billion in sales, over 800 locations and growing, our 10,000+ team members across the United States and Canada are passionate about delivering our goal to WOW Every Customer and Be the Best!We invite you to join our team. Gerber offers a great place to launch and grow careers. As we continue to grow, we have endless opportunities for you to grow with us.Gerber Collision & Glass recognizes, values and welcomes all applicants with unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans.Job Description:WELCOME TOGERBER COLLISION & GLASS- NORTH TX MARKET, CURRENTLY HIRING AT:The Colony, CARROLLTON, & DENTON TX LOCATIONS.Pay ranges starting from $90,000 to $140,000 +depending on experience and location*OUR SHOPS IN NORTH TEXAS DALLAS AREA IN DENTON & CARROLLTON WANT TO TALK TO YOU ABOUT YOUR FUTURES WITH GERBER!*GOT QUESTIONS; TEXT KANDY: HR | Regional Recruiting Manager | LA/TX*$$ EMPLOYEE REFERRAL BONUS'S FOR GENERAL MGR’S, ESTIMATORS, & BODY TECHNICIANS (BRING YOUR PEERS w/YOU AND GET AN ADDED BONUS)$$*The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.#ABTSOUTHBenefits That Drive Your SuccessGerber offers the comprehensive benefits you expect from an industry leader, including:Competitive Pay PlansMedical, Prescription Drug, Dental & Vision Insurance401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsurancePaid Vacation & HolidaysContinuing Education OpportunitiesGerber Collision & Glass is proud to be an equal opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.About UsGerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit gerbercareers.com to learn more about our company.

$27.00/hourShift Premium may ApplyImmediately hiring! Are you a diligent and meticulous individual with expertise in automotive repair If you have experience working in an auto garage or car dealership, we want you to join the Avis Budget Group enterprise! What You'll Do: You'll perform standard and complex repairs, including warranty, on a wide variety of auto makes and models with no technical supervision, including the diagnosis and repair of engines, transmissions, exhaust, brakes, electrical, air conditioning and computer systems. You may also act as a technical expert to other technicians in the shop. Perks You'll Get: Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training in our vehicle makes and modelsPaid time offMedical, d ental and o ther i nsuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License Minimum 3 years of auto repair experience, holding 3 ASE (ability to acquire 2 additional ASE certificates within first year)Knowledgeable in the following areas covered by the ASE certification programs, including but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning and Engine Performance, Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United States Previous Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are : Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate . The fine print: Avis Budget Group is an equal opportunity employer - M/F/Veterans/Disabled . This role requires the ability to lift up to 50 pounds, continuously stand, walk, sit and kneel frequently, and enter and exit vehicles. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of Avis Budget Group. Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. DallasTexasUnited States of America

Logistics at full potential.At GXO, we’re constantly looking for talented individuals at all levelswho can deliver the caliber of service our company requires. You know that a positive work environment creates happy employees, which boosts productivity and dedication. On our team, you’ll have the support to excel at workand the resources to build a career you can be proud of.1st Shift, Monday - Friday, 8:00am - 5:30pm (must be flexible)As the Facilities Engineering Manager, you will be responsible for driving continuous improvement activities to deliver better equipment performance across the contract packaging network. Become a part of our growing, dynamic team and we'll help you take your career to the next level. Pay, benefits and more.We are eager to attract the best, so we offer competitive compensation and a generous benefits package, including full health insurance (medical, dental and vision), 401(k), life insurance, disability and more.What you’ll do on a typical day:Coordinate teams to improve preventive maintenance programsSupport all site capital projects from scope creation to go-liveWork with site management and engineers to develop training programs for machine operatorsBuild relationships with key OEMs for future training and automation opportunitiesAct as superuser and network resource of all equipment Demonstrate an understanding of and adhere to GXO’s quality and environmental policies; maintain a safe and clean work environment and ensure accurate use of processesEnsure mechanical, plumbing, and electrical facility equipment is properly maintained in good, safe working orderPerform and/or schedule preventive maintenance of facility equipment and repairs in a timely fashionHandle contractor services and bids for HVAC, janitorial, waste removal and recycling, PIT maintenance and repair, elevator inspections and repair, pest control, annual service forpreventive maintenance on scales, packaging machines and tech support for conveyorsWhat you need to succeed at GXO:At a minimum, you’ll need:5 years of relevant work experienceBachelor’s degree or equivalent work or military experienceExperience with Microsoft Office and computerized scanner equipment Availability to work a flexible schedule as needed, including planned and unplanned overtime, which may include weekendsIt’d be great if you also have:Excellent interpersonal and management skills; ability to work collaboratively in a team environment and get along with diverse personalitiesSelf-motivated and able to work well with minimal supervision Familiarity with the most widely known and emerging tools, technologies and social applicationsExperience with PLC programming (Beckhoff, Allen Bradley), VFDsExperience with controls power distribution layouts, panel layouts, hardware specificationExperience with robots, high speed sorters, ASRS, Goods-to-Person robots, various conveyance systemsExperience setting up and working with a Computerized Maintenance Management SystemWe engineer faster, smarter, leaner supply chains. GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team – energetic, innovative people of all experience levels and talents who make GXO a great place to work.We are proud to be an Equal Opportunity/Affirmative Action employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status.GXO adheres to CDC, OSHA and state and local requirements regarding COVID safety. All employees and visitors are expected to comply with GXO policies which are in place to safeguard our employees and customers.All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test.The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement here.#appcastrequest

Description IntroductionDo you want to be appreciated daily Our nurses are celebrated for being on the front line, empathetic for patients. At Medical City Dallas our nurses set us apart from any other healthcare provider. We are seeking a(an) RN CNC Neurology to join our healthcare family.BenefitsMedical City Dallas, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include:Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation.Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more.Free counseling services and resources for emotional, physical and financial wellbeing401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service)Employee Stock Purchase Plan with 10% off HCA Healthcare stockFamily support through fertility and family building benefits with Progyny and adoption assistance.Referral services for child, elder and pet care, home and auto repair, event planning and moreConsumer discounts through Abenity and Consumer DiscountsRetirement readiness, rollover assistance services and preferred banking partnershipsEducation assistance (tuition, student loan, certification support, dependent scholarships)Colleague recognition programTime Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence)Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income.Learn more about Employee BenefitsNote: Eligibility for benefits may vary by location.At Medical City Dallas, our nurses play a vital part. We know that every nurse’s path and purpose is unique. Do you want to create your own personal career path in nursing HCA Healthcare is your career destination! Our scale makes it possible for nurses to create the career path that fits their life – for life – and empowers their passion for patient care. Apply today for our RN CNC Neurology opportunity.Job Summary and QualificationsThe Clinical Nurse Coordinator (CNC) ensures and delivers high quality, patient-centered care and coordination of all functions in the unit/department during the designated shift. In collaboration with other members of the management team, the CNC directs, monitors, and evaluates nursing care in accordance with established policies/procedures, serves as a resource person for staff, and models a commitment to the organization’s vision/mission/values to support an unparalleled patient experience and clinical outcomes that contribute to overall departmental performance.What you will do in this role:Assists with admission and discharge processes to ensure efficient throughput and high quality, patient-centered care.Participates in the ongoing assessment of the quality of patient care services provided in the unit, in collaboration with other members of the management team.Collaborates with subject matter experts and other managers to create an environment of teamwork that supports improved outcomes and service.Supports a patient-first philosophy and engages in service recovery when necessary.Supports the efforts of the facility to improve engagement by operationalizing current nursing strategies, including employee rounding, hourly rounds, and other initiatives. Provides recommendations related to interviewing, selecting, and training new staff. Recommends and implements courses of action, including training and development, conflict resolution, personnel policy compliance, completion of performance evaluations, and/or disciplinary actions to ensure a competitively better organization.Assists with staff scheduling. Manages all practical aspects of staff labor in accordance with patient care needs and established productivity guidelines.Supports proper inventory control and assists with managing supplies and equipment.What qualifications you will need:Basic Cardiac Life Support RequiredRegistered Nurse in TX or holds a compact licenseBachelors Degree or ADN Required in Nursing1-2 years Recent experience working in a Hospital SettingMedical City Dallas is recognized for its advanced medical facilities and commitment to excellence in patient care. We are an 895+ bed tertiary care center. Our medical team consists of more than 1,500 physicians, many are recognized as the world's best in their specialties. Patients travel to Medical City Dallas from all over the United States and from other countries. We offer sophisticated treatment by our 400+ in-house physician specialists. Medical City Dallas has a full-service adult hospital and pediatric hospital. We have separate adult and pediatric emergency rooms, outpatient clinics and diagnostic centers. Our providers have access to state-of-the-art technology and are pioneering new medical procedures to accommodate patient needs. As a part of the Medical City network of hospitals, patients are ensured access to leading medical experts and advanced healthcare innovations across the network.HCA Healthcare has been recognized as one of the World's Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses."The great hospitals will always put the patient and the patient's family first, and the really great institutions will provide care with warmth, compassion, and dignity for the individual."- Dr. Thomas Frist, Sr.HCA Healthcare Co-Founder Join a family that cares about every stage in your career! We are interviewing candidates for our RN CNC Neurology opening. Apply today and a member of our Talent Acquisition team will reach out.We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

StandardAero is one of the largest independent maintenance, repair, and overhaul providers in the aerospace industry. At our plants, our units engage in a variety of work scopes involving trouble-shooting, problem solving, and working together to embody our #1 priority, which is ensuring the safety of our people and our product.At StandardAero, we offer:A clean, safe, and temperature-controlled work environment.Competitive compensation structures and a total rewards package.An opportunity to work with a variety of aircraft engines.A variety of shifts and hours.Opportunities for horizontal and vertical movement within the organization.DETAIL INSPECTORBuild an Aviation Career You're Proud OfYour work ties us all together, helping our teams function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks.As an Engine Detail Inspector you will perform visual and dimensional inspection on engines, accessories and related components and parts to determine their condition for return to service in accordance with approved data and customer requirements. Cross trains in other complementary skills as needed to support production requirements.What you'll do:Performs visual and dimensional inspection of products being processed for repair or overhaul to verify their conformance to the approved data and customer requirements.Determines and documents the modification status/configuration of products being processed for repair or overhaul to verify compliance to the applicable regulatory and customer requirements.Ensures the products to be inspected are sufficiently clean and in acceptable condition to perform the inspections necessary to complete the work instruction.Determines the repairability of those products not meeting the applicable requirements.Records the inspection results on the appropriate inspection documentation.Generates the applicable documentation for the repair of unserviceable products.Inspects and identifies parts in the Reduced to Parts (RTP) process.Performs the necessary physical inspection of parts in the Check for Acceptance (C for A) process.Participates in continuous improvement of cell processes.Cross trains in other complementary skills and seeks endorsements for those skills as needed to support production requirements.Moves between production assignments that utilize multiple skills as needed to support production requirements.Participates in the cross training of other technicians as needed to support production requirements.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carries out other duties as assigned.Position Requirements:Knowledgeable and proficient in the proper use of precision measuring equipment.Ability to read, understand and interpret blueprints.Knowledgeable in and ability to identify and interpret conditions on products that are the result of service operation.Ability to use and interpret publications used in the production process (graphs, charts, schematics, blueprints).Working knowledge of the functions and operation of the products being inspected.Proficient in technical writing.Preferred Characteristics:Working knowledge of production management computer system and other related internal control systems.Ability to complete the Detail Inspector Training & Development Plan.Ability to lift up to 25 pounds (unassisted) for approximately 25% of the average work day.Regularly required to sit for prolonged periods.Ability to work day shift, evening shift, or weekend shift, as required.Must be authorized to work in the US.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Overview: OVERVIEWEnjoy top hourly pay plus a competitive bonus plan, a four-day workweek, and a great benefits package (medical, dental, & vision, PTO, and 401k).Our Mobile Automotive Technicians enjoy a fully equipped, company provided van with state-of-the-art tools, company iPhone with access to resources like Mitchell Pro-Demand, as well as a growing client base that comes from being part of one of U.S. News’ Best Companies to Work For.You can grow and advance your career through on-the-job training and paid training opportunities. In addition, AutoNation Mobile Service is part of AutoNation which allows our mobile technicians incredible growth opportunities throughout the United States. AutoNation Mobile Service is fast-growing and now is the right time to get in!WE WILL DEPEND ON THIS PERSON TO Perform vehicle repairs within regular scope of work (excluding tasks such as steering rack, fuel tank, engine teardown)Diagnose and assess circumstance and situation, depending on scope of work, either perform repair or sublet repair to partner shopsDiagnose and repair vehicles to ensure customer needs are metProvide labor and time estimates for additional automotive repairsEncourage customers to schedule recommended work with fact-based selling and automotive expertiseBe part of a team that cares about customers and their carsWork as part of a team to solve technical problems quickly and effectivelyPerforms other duties as requested by managerMust be able to remain in a stationary position for 50% of the timeMust have the ability to lift up to 50 poundsYOU SHOULD HAVEMinimum of 7 years of recent professional automotive repair experienceMaster level ASE certification or equivalentKnowledge in working and using repair shop software (All Data, Mitchell 1, etc.)Valid driver's license (clean background)Pass a pre-employment drug screenA desire to provide an extraordinary customer experienceComfortable working in varying environmentsSpeaking and writing in English is required, Spanish is a plusHigh school diploma or the equivalentWORKING WITH USFlexible Schedule: 4 days on, 3 days off every week!Competitive Pay (DOE)Paid vacation timeMedical, dental, and vision insurance401(k) matching 50% up to first 5%Access to state-of-the-art tools and equipment (you do not bring your own)Company branded vehicle provided for use during work shiftsWork clothes (uniforms) providedCasual atmosphere and great people to work withDOT Prerequisites: Employment will be contingent upon the successful completion of all prerequisites required by the U.S. Department of Transportation (DOT) / Federal Motor Carrier Safety Administration (FMCSA) regulations, including a physical and medical certification. Company OverviewAutoNation, a provider of personalized transportation services, is driven by innovation and transformation. As one of America's most admired companies, AutoNation delivers a peerless Customer experience recognized by data-driven consumer insight leaders, Reputation and J.D. Power. Through its bold leadership and brand affinity, the AutoNation Brand is synonymous with "DRVPNK" and "What Drives You, Drives Us." AutoNation has a singular focus on personalized transportation services that are easy, transparent, and Customer-centric.BenefitsClick here to learn more about our Benefits.Join us as we pave the way to moving our company, our communities and our industry forward. Apply today at a location near you or wherever you dream the road will take you.AutoNation is an equal opportunity employer and a drug-free workplace.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training.What's in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture: Our culture is what makes UniFirst an organization that stands out from the rest.Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you'll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED is preferred. Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age. Valid driver's license and a safe driving record are required. Knowledgeable in maintenance equipment. Minimum of 6 months' work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment test to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first.UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws UniFirst is an equal employment/affirmative action employer. If you need accommodation for any part of the application process because of a medical condition or disability, please send an e-mail to or call to let us know the nature of your request. UniFirst Recruiters and/or representatives will not ask job seekers to provide personal financial information when submitting a job application. Please be vigilant as such requests for information may be fraudulent.

Req ID:436657Address: 1021 Dale Evans Italy, TX, 76651Benefits: * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Welcome to Love’s!Diesel Apprentices work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Are you mechanically inclined with no professional experience No problem! We will teach you! In the apprentice program, you can expect to learn:Electrical diagnostics and repairsAir conditioning & heating diagnostics and repairsWheel end assembly diagnostics and repairsAir system diagnostics and repairsAir brakes diagnostics and repairsCharging system diagnostics and repairsBasic computer diagnostics and auxiliary component replacementParts lookup and acquisition Job Functions: Assist customers with roadside servicesLearn preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Specific Duties and Responsibilities: Perform daily mechanical inspections and repairs to ride structures and unitsMaintain and trouble shoot amusement rides and park equipmentMaintain records for maintenance and inspections performedWork with other departments as needed to complete dutiesMaintain compliance with all safety rules, procedures, and regulationsMaintain positive interaction with other employees and guestsOther tasks and duties as assigned Job Requirements: Must be at least 18 years old, and possess a high school diploma or equivalentA varied skill set including knowledge of general maintenance, welding, and machine shop repairMust have experience in industrial or heavy equipment maintenance and repair procedures Must be able to work flexible hours including days, nights, weekends, holidays, and extended hours as scheduledMust be willing to work under various weather conditionsMust be able to lift up to 50lbs.Highly motivated, self-starter and great time managementMust have own basic hand toolsMust be able to climb and work at heights over 50 feetMust be able to stoop, bend, and lift regularlyMust have a valid driver’s license, a good driving record If you are able to answer "YES" to all of the following questions, please continue the application process by clicking "Apply" Can you provide legal documentation establishing your identity and eligibility to be legally employed in the United States Are you able to perform the essential functions of the job for which you are applying with or without reasonable accommodation Within the last 90 days, can you state that you have not used illegal or social drugs (excluding marijuana), such as MDMA (Molly), cocaine and crystal methamphetamine I am willing to agree that future text messages relating to Six Flags, Inc., including company news, job posting application status updates, and other information, may be sent on behalf of Six Flags, Inc. to the cell phone number I provide.

BlueTriton is a leading provider of spring and purified water products - the name behind your favorite bottled water brands. We are proud to offer an extensive portfolio of highly recognizable, responsibly sourced, and sustainably packaged spring water in addition to other quality products and services. Get ready to quench your thirst with exciting possibilities when you join BlueTriton for a fiercely good career doing work that matters.Water might seem simple enough, but there is a lot going on beneath the surface. Working in a factory or warehouse requires rolling up your sleeves to get things done and the tenacity to go the extra mile again and again. We believe the rewards are worth the effort: a business you help shape, a supportive team you learn from, and the chance to have a sustainable impact in which you can truly be proud.Job DescriptionWe are currently seeking a Maintenance Supervisor to work in our Dallas, TX location. Major Responsibilities: • Part of the Maintenance leadership team responsible for plant technical operations, specifically production line maintenance, processing equipment maintenance and utility equipment maintenance • Assist with leading the preventative maintenance process, defining processes, driving improvements and achieving KPI targets • Coach, mentor and develop front line employees to meet current and future business requirements • Help lead change initiatives and continuous improvement efforts, including the implementation of a LEAN manufacturing environment • Utilize and model our beliefs in the execution of daily work activities and decision making • Build relationships with frontline team members to help create and maintain a positive work environment • Partner with internal customers and suppliers, colleagues, and support services to ensure achievement of targets • Understand and adhere to internal and external regulations, procedures & policies • Maintain cleanliness to GMP standards and ensure all safety standards are met * • Effectively communicate safety, quality, technical and training issues to team • Review daily maintenance effectiveness to identify opportunities for improvement and work with the Operations team to get resolution • Ensure the development and implementation of action plans to address root causes of failuresQualificationsQualifications: • Bachelor’s Degree in Engineering or Industrial Technology or equivalent combination of education and/or experience. • Five or more years of experience in industrial maintenance with at least two or more years of experience in a leadership capacity • Prior experience in a beverage, food or other clean manufacturing environment with familiarity with quality, GMP and hygiene regulations preferred. • Prior experience with pneumatics, hydraulics, electric systems and PLC control systems and communication systems. • Knowledge of preventative maintenance programs with a grasp of financial factors in maintenance. • Strong computer skills including Microsoft Suite applications; business management software (SAP preferred) needed. • Understanding of production processes & technical troubleshooting and root cause analysis skills. • Continuous improvement or process improvement experience. Green belt or black belt certification or prior TPM experience preferred. • Effective communication and presentation skills with the ability to facilitate change • Time management, delegation and organization skills with strong problem-solving ability • Ability to grow relationships with business partners and to lead, coach and develop employees • Schedule flexibility with the ability to provide on call coverage.BlueTriton Brands, Inc. (“BlueTriton”) is a water and beverage company in North America that produces and distributes a portfolio of brands of spring water, purified water, and other beverages, which include Poland Spring®, Deer Park®, Ozarka®, Ice Mountain®, Zephyrhills®, Arrowhead®, Origin, Saratoga®, AC+ION®, Pure Life®, B’EAU®, and Splash Refresher. BlueTriton also owns and operates ReadyRefresh®, a water and beverage delivery service for homes and offices. Headquartered in Stamford, Connecticut, BlueTriton is a privately held company with operations and distribution primarily in the United States and Canada, employing more than 7,000 employees. BlueTriton manages water resources for long-term sustainability and helps protect more than 20,000 acres of watershed area owned by the company from harm and destruction. The company sources from 56 springs and has 30 production facilities across North America, with some verified to the Alliance for Water Stewardship Standard. BlueTriton is a Water Champion with The Water Council and has committed to be verified under their WAVE program.BlueTriton Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. BlueTriton Brands is committed to providing reasonable accommodation for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please contact us at

DeWALT Service Technician (Dallas Area: Carrollton, TX) On-the job training provided; experience preferred but not required. This position is hourly and pays up to $22hr depending on experience. Come make the world and accelerate your success. It takes great people to achieve greatness. People with a sense of purpose and integrity. People with a relentless pursuit of excellence. People who care about making things better For Those Who Make The World. Sound like you Join our top-notch team of more than 50,000 diverse and high-performing professionals globally who are making their mark on some of the world's most beloved brands, including DEWALT®, BLACK+DECKER®, CRAFTSMAN®, STANLEY®, CUB CADET®, and HUSTLER®.The Job: As a DeWALT Service Technician, you'll be part of our Product Services team working as a on-site employee. You'll get to: Handle simple repairs to all portable electric and pneumatic tool, light construction equipment, & outdoor products.Troubleshoot tool failure--fully or partially disassembling unit to examine components for wear/defects and replacing parts that are worn or defective. Assist with maintenance of shop equipment and maintains clean and safe work environment.Properly inspect tools and equipment for safe operation prior to use, returning tools in good condition to appropriate storage area after use.Complete work orders using repair parts and labor to include pricing and pertinent customer information.Manage inventory by ensuring accuracy with parts and accessories.Other duties as assigned.The Person: You love to learn and grow and be acknowledged for your valuable contributions. You're not intimidated by innovation. Wouldn't it be great if you could do your job and do a world of good In fact, you embrace it. You also have: Ability to interpret mechanical diagrams, wiring schematics and printed servicing data.Knowledge of electricity principles and air flow as it applies to a power source for power tools.Ability to diagnose mechanical and electrical faults in power tools and equipment. Ability to perform simple mathematical calculations.Goal driven mentality. You like to meet and maintain daily/weekly/quarterly productivity goals without sacrificing quality. The Details: You'll receive a competitive salary and a great benefits plan including:Medical, dental, life, vision, wellness program, disability, 401(k), Employee Stock Purchase Plan, paid time off, and tuition reimbursement.Discounts on Stanley Black & Decker tools and other partner programs. And More: We want our company to be a place you'll want to be - and stay. Being part of our team means you'll get to: Grow: Be part of our global company with 20+ brands to grow and develop your skills along multiple career paths. Learn: Have access to a wealth of learning resources, including our Lean Academy, Coursera®, and online university. Belong: Experience an awesome place to work, where we have mutual respect and a great appreciation for diversity, equity, and inclusion. Give Back: Help us continue to make positive changes locally and globally through volunteerism, giving back, and sustainable business practices. What's more, you'll get that pride that comes from empowering makers, doers, protectors, and everyday heroes all over the world. We're more than the #1 tools company. More than a driving force in outdoor power equipment. More than a global leader in industrial. We're visionaries and innovators. As successful as we've been in the past, we have so much further to go. That's where you come in. Join us! #LI-RB #LI-Onsite All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran's status, or any other protected characteristic. We Don't Just Build The World, We Build Innovative Technology Too. Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you'll get the unique chance to impact some of the world's most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights. Who We Are We're the World's largest tool company. We're industry visionaries. We're solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art "smart factory" products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company. Benefits & PerksYou'll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.What You'll Also GetCareer Opportunity: Career paths aren't linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.Learning & Development: Our lifelong learning philosophy means you'll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities). Diverse & Inclusive Culture: We pride ourselves on being an awesome place to work. We respect and embrace differences because that's how the best work gets done. You'll find we like to have fun here, too. Purpose-Driven Company: You'll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices. EEO Statement: All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran's status or any other protected characteristic. If you require reasonable accommodation to complete an application or access our website, please contact us at or at . Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password. Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

Why You Should Join the Service Experts Team Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth.Join us and become an EXPERT!Service Experts Company Perks and Benefits for YOUTop PayforTop Performers, including incentive and bonus opportunities, depending on the positionUp to $130,000 on average First Year Total Compensation” Total Compensation is Hourly plus Spiffs/Commissions***Depending on Center this could be moreGenerous PTO provided:20 paid days off within your first year of employment (vacation & national holidays)25 paid days off after your 2nd year of employmentNo layoffs during “Slow Season” – due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ample advancement and career-growth opportunities available across the U.S.Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programsWe provided wellness program options for free employee medicalCompany-provided smart phone, tablet, uniform plan, and tool replacement programWe’ll make you better at what you do with our internal Training AcademyBest-in-class 401(k) Retirement Savings Plan with attractive company matching contributionsCompany-paid employee Life Insurance with options for YOU and your Family!Short-term and Long-term disability insurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Position Summary:Under general supervision, performs diagnostic, service, and installation of plumbing in residential and light-commercial environments. Holds plumbing and/or gas license as required by governmental regulations. Ensures that work is performed in accordance with relevant codes. Assembles, installs, or repairs pipes, fittings, or fixtures of heating, water, or drainage systems in accordance to specifications and plumbing codes. Communicates with customer to answer questions, resolves problems, and ensures complete customer satisfaction. Promotes products and services to customer. Works under the direction of the Field Supervisor or General Manager.Key Responsibilities:Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner. Identifies potential problems to prevent premature and unexpected breakdowns or callbacks.Maintains and repairs plumbing systems carrying water, steam, chemicals and fuel in heating, cooling, lubricating and other process piping systems by replacing defective washers, replacing or mending broken pipes, or opening clogged drains. Repairs or replaces plumbing fixtures; test joints and pipe systems for leaks, open clogged drains, measure, cut, thread, bend, ream and install pipe and pipe fittings. Inspects high pressure, air, steam, water and gas systems to ascertain malfunctions.Assembles pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing, or welding equipment. Weld small pipes or special piping, using specialized techniques, equipment, or materials, such as computer-assisted welding or microchip fabrication.Locates and marks the position of pipe installations, connections, passage holes, or fixtures in structures, using measuring instruments such as rulers or levels, and cuts openingsInstalls pipe assemblies, fittings, valves, appliances such as dishwashers or water heaters, or fixtures such as sinks or toilets, using hand or power tools. Anchors steel supports from ceiling joists to hold pipes in place. Cuts openings in structures to accommodate pipes or pipe fittings, using hand or power tools.Measures, cuts, threads, or bends pipe to required angle, using hand or power tools or machines such as pipe cutters, pipe-threading machines, or pipe-bending machineInstalls underground storm, sanitary, or water piping systems, extending piping as needed to connect fixtures and plumbingReviews blueprints, building codes, or specifications to determine work details or procedures. Interprets drawings and specifications to determine layout requirements. Studies building plans and inspect structures to assess material and equipment needs, to establish the sequence of pipe installations, and to plan installation around obstructions such as electrical wiring.Fills pipes or plumbing fixtures with water or air and observe pressure gauges to detect and locate leaksDirects helpers engaged in pipe cutting, preassembly, or installation of plumbing systems or componentsEnsures company property, vehicles, and tools are being used, maintained and properly accounted forMaintains current plumbing and/or gas license in accordance with governmental regulationsFollows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to branch, and orders/replenishes vehicle stock as neededRepresents the company professionally, honestly, and ethically in all business matters and activitiesPerforms similar/other duties as needed or assignedHealth & Safety Roles and ResponsibilitiesReports any unsafe acts, conditions and hazards to direct supervisor/manager immediatelyReports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediatelyCorrects substandard acts or conditions within area of controlUses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s)Never removes or renders ineffective any safety guards, devices, or clothing prescribed to be in place or wornComplies with the general rules as prescribed by company program(s) procedure(s)Operates devises or equipment as prescribed by company program(s) or procedure(s)Participates in any safety initiatives, teams, or committeesReports all injuries or incidents as prescribed by company program(s) or procedure(s) immediatelyProvides input on developing safety initiatives and plans to eliminate exposures that could cause accidentsDoes not perform any act that may endanger the safety or well-being of othersDoes not engage in any pranks, contests, or rough boisterous behaviorWorks in compliance with applicable legislative requirementQualificationsHigh School diploma or equivalent with on-the-job and formal classroom training in plumbing work in construction, maintenance, commercial, and residential environmentFour years’ experience in plumbing repair, maintenance, and installation in addition to on-the-job trainingPlumbing and/or gas license as required by local, state, provincial, or national governmental regulationsEPA and safety certifications requiredCurrent knowledge of and continuing education in national, state, and local plumbing code regulationsProficient mechanical aptitude and the ability to operate all necessary tools and equipment to perform various plumbing projectsKnowledge of machines and tools used in the construction or repair of houses, buildings and other structures. This knowledge includes machine and tools design, uses, repairs, and maintenance.Working proficiency in basic mathematics and metric and standard measurementsProficient at reading wiring diagrams and troubleshooting problems with plumbing systems and equipmentEffective communication skills to communicate with customer and resolve customer issues, complaints, or concernsEffective and efficient time-management and organizational skillsFamiliar with the HVAC industry is preferredMust be willing to train new plumbers in technical skills and company proceduresValid driver’s license with acceptable driving recordAvailable to work flexible hours and on-call shifts as neededAbility to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl.Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areasAbility to safely climb 300lb load capacity rated laddersNatural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perceptionAbility to lift up to 100 pounds with assistance and ability to lift and carry items weighing up to 50 pounds

Crawford Services1405 Avenue T, Grand Prairie, TX 75050Why You Should Join the Service Experts Team Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth.Join us and become an EXPERT!Service Experts Company Perks and Benefits for YOUTop PayforTop Performers, including incentive and bonus opportunities, depending on the positionUp to$130,000on average First Year Total Compensation” Total Compensation is Hourly plus Spiffs/Commissions***Depending on Center this could be moreGenerous PTO provided:20 paid days off within your first year of employment (vacation & national holidays)25 paid days off after your 2nd year of employmentNo layoffs during “Slow Season” – due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ample advancement and career-growth opportunities available across the U.S.Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programsWe provided wellness program options for free employee medicalCompany-provided smart phone, tablet, uniform plan, and tool replacement programWe’ll make you better at what you do with our internal Training AcademyBest-in-class 401(k) Retirement Savings Plan with attractive company matching contributionsCompany-paid employee Life Insurance with options for YOU and your Family!Short-term and Long-term disability insurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Key Responsibilities:Works under minimal supervision to perform residential and/or light commercial service and maintenance calls Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks Completes routine maintenance and equipment cleaning as needed or required Responsible for delivery and removal of parts and equipment needed to complete service work Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer. Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit. Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for Represents the company professionally, honestly, and ethically in all business matters and activities Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed Performs similar/other duties as needed or assigned Regular, reliable attendanceHealth & Safety Roles and ResponsibilitiesReports any unsafe acts, conditions and hazards to direct supervisor/manager immediatelyReports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediatelyCorrects substandard acts or conditions within area of controlUses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s)Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or wornComplies with the general rules as prescribed by company program(s) procedure(s)Operates devises or equipment as prescribed by company program(s) or procedure(s)Participates in any safety initiatives, teams, or committeesReports all injuries or incidents as prescribed by company program(s) or procedure(s) immediatelyProvides input on developing safety initiatives and plans to eliminate exposures that could cause accidentsDoes not perform act that may endanger the safety or well-being of othersDoes not engage in any pranks, contests, or rough boisterous behaviorWorks in compliance with applicable legislative requirementQualifications:High school diploma or GED with additional training and 2 to 5 years’ experience in HVAC with technical training certification required Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area EPA and safety certifications required Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories Proficient mechanical aptitude and the ability to operate all necessary tools and equipment Proficient and able to operate all necessary tools and equipment to perform various service projects Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision Proficient and able to install a basic duct fitting Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns Effective and efficient time-management and organizational skills Valid driver’s license with acceptable driving record Available to work flexible hours and on-call shifts as needed Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl. Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception Ability to lift up to 75 pounds and ability to lift and carry items weighing up to 50 pounds

Overview: Join the Drivers Edge team and enjoy a competitive salary, benefits package, and opportunities for career growth. Apply today to take the next step in your automotive career!Drivers Edge is seeking a motivated and skilled individual to join our team as a Hybrid Assistant Manager/General Service Tech. This unique position offers a combination of management responsibilities and hands-on technical work in our tire and lube department.Compensation: $18.00/Hr. - $22.00/HrBenefits: Competitive Bi-Weekly Pay Tuition Reimbursement 3K Annually Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Assist the Shop Manager in overseeing daily operations Provide exceptional customer service by addressing customer inquiries and concerns in a timely and professional manner Listen to and thoroughly document customer's concerns; inspect vehicle and refer to service history to accurately identify and verify customer's service needs. Recommend services according to appropriate level of knowledge. Clearly communicate any additional recommendations from the Automotive Technician Promote the sales of appropriate services, parts, and accessories by demonstrating an understanding of the product and associated service requirements. Perform general automotive maintenance and repair services, including oil changes, tire rotations, brake repairs, and more Maintain a clean and organized work environment to ensure efficiency and safety Assist in training and mentoring all teammates Qualifications: High School Diploma or equivalent Prior experience as a Service Advisor is highly preferred, but not required Professional appearance and proven ability to work in a process driven environment Possess valid driver's license, or obtain a valid driver's license within 30 days of hire date Ability to work a minimum of five days, including weekends Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#bayard

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily . WHAT WE OFFER We are a large company serving many unique customers - because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering: Ongoing Education & Training Exposure to a Large Variety of Projects Industry-leading Benefit Packages Advanced support and tools designed to improve your workflow PAY $20-35HR DOE Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time. Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers' expectations Provides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner. Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base. Test malfunctioning systems and components using electrical and/or mechanical skills. Maintain legible corporate and personal records of work history. Provides department support by processing job tickets, and work orders to the necessary department promptly. Provide support by picking up, delivering, and installing cases. Perform work on minor construction and remodeling projects including startups of new installations. Drives company vehicle in a safe manner. Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED. EPA certification. Certification from an accredited vocational-technical or trade school is a plus! Minimum 2+ years of commercial refrigeration experience required. Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus. Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. Must have a good driving record and be able to work independently. Emergency on-call availability is a basic requirement. Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Construction Worker IIThis position reports to a Construction Manager or Construction Supervisor, and is responsible for the daily civil construction for a range of wireless locations. These projects typically involve construction services related to wireless telecommunication systems. This will include generator installations, cabinet installations, concrete pads, foundations, framing, fencing, etc.Position ResponsibilitiesSupervise, Lead, and Assist with all trenching, conduit installation, concrete work, wire installation, ATS/MTS/Camlock installation. Work must be completed in a safe, professional manner.Perform daily on site Safety and Quality inspections.Clearly understands, complies with and enforces Company and job safety requirements to include, but not limited to: OSHA, Federal and State laws and/or regulations.Document all work each day with photos and explanation. Proper closeouts must be supplied for all jobs before they can be signed off as complete.Review the scope of work and construction drawings with all crew membersReport any deviations from the scope of work/construction drawings to the Construction ManagerWork Requirements.cls-1{fill:none;stroke:#5b6670;stroke-miterlimit:10;stroke-width:2px} Years of Experience 1 + years of related experience* may vary based on technical training, certification(s), or degree.cls-2{fill:none;stroke:#5b6670;stroke-miterlimit:10;stroke-width:2px} CertificationTravel Required 75-100%Salary and Benefit Information The likely hourly rate for this position is between $22.10 - $29.90. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. View information about benefits and our total rewards program. About Our WorkWe are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

This position is an essential part of Sherwin’s manufacturing team. This position is responsible for installing, troubleshooting, repairing, and maintaining production and facility equipment to support production requirements and goals. Equipment may include: dryers, chillers, thermal oxidizer, HVAC, fire pump, mixers, mills, filling line equipment, conveyors, wrappers, tanks, motors, pumps, tank washers, tank tipper, as well as dock and building maintenance, etc. This position performs various maintenance tasks as assigned and is responsible for maintaining a safe, clean, and productive working environment. Additional Information: 3rd Shift Monday - Friday 11:00pm-7:30am Here, we believe there’s not one path to success, we believe in careers that grow with you. Whoever you are or wherever you come from in the world, there’s a place for you at Sherwin-Williams. We provide you with the opportunity to explore your curiosity and drive us forward. Sherwin-Williams values the unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans. We’ll give you the space to share your strengths and we want you show us what you can do. You can innovate, grow and discover in a place where you can thrive and Let Your Colors Show! At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commuteit matters to us. A general description of benefits offered can be found at http://www.myswbenefits.com/. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Sherwin-Williams is proud to be an Equal Employment Opportunity/Affirmative Action employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Perform preventive maintenance inspections and service on equipmentRepair broken machines and equipment quickly and efficientlyIdentify causes of unexpected breakdowns of machinesRecord and report damaged, worn, or broken partsOrder and install replacement parts for machinesAssist in electrical projects and perform minor electrical repairsAssist in pipe fitting tasks and perform some installation unassistedMaintain and service building equipment including HVAC, lighting, water and sewer, etc.Maintain documentation as requiredClean, organize, inventory, stock, and otherwise maintain shop areas, parts, tools, and suppliesCoordinate with managers to schedule regular maintenance on machinesMaintain technical knowledge through trainingMinimum Requirements: Must be at least eighteen (18) years of ageMust be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the futureMust have at least one (1) year of work experience as a mechanic in a manufacturing and/or distribution environment Preferred Qualifications Have at least two (2) years of work experience as a mechanic in a manufacturing and/or distribution environmentHave an industrial, electrical, and/or welding certification or licenseHave at least one (1) year of maintenance experience applying electrical, hydraulic, and pneumatic conceptsHave at least one (1) year of work experience implementing Programmable Logic Controls ("PLC")

The pay range per hour is $29.35 - $33.57Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Engineering & Facilities - Maintenance Technician 1 (MT1)About job:up to $2.50 shift differential or key premium based on KeyTuition Reimbursement ProgramBenefits eligible within two weeks of employmentCurrently hiring for below shift:A1 Key - Saturday, Sunday, Monday from 6:00am to 6:00pmAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 1 (MT1), you will maintain and repair automated material handling and facility equipment, and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target mechanics to solve problems, validate quality of work for outside specialty contractors, and meet aggressive time lines. You will collaborate with Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You will operate Target owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies as needed. This is an entry-level position in the technician role with promotion potential to Maintenance Technician 2, by completing and demonstrating proficiency in all related Maintenance Technician 2 job requirements, measured by both hands-on validation and by a written assessment. A successful candidate in this role will:Maintain and perform basic troubleshooting of electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, scales and printer applicatorsDemonstrate mechanical proficiency for hydraulic and pneumatic systems, and AC/DC electrical motors and drivesAdjust, reset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Maintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsPerform preventative maintenance on facility equipment (i.e. Powered Industrial Trucks, HVAC, air compressors and dryers, and balers)Perform basic electrical maintenance and simple repair/replace of various electrical circuits and related electronic equipment, using tools such as multi-meters and infrared thermometers Read and understand basic electrical and electronic schematicsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes or cartons up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licenseBasic PC competency and ability to use mobile apps on handheld devicesFamiliar with simple wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresCommonly used industrial toolsBasic Carpentry and PlumbingBasic blueprint and schematic readingBasic AC/DC electrical and electronic principlesBasic metal fabrication and weldingBasic Industrial ControlsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with Programmable Logic Control (PLC) programs and Human Machine Interfaces (HMIs)Ability to troubleshoot basic Input/Output functionsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)Target will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Target store or Supply Chain Facility or reach out to Guest Services at 1-800-440-0680 for additional information.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay, based upon the UA Local 100/146 rates.Comprehensive benefits package provided by the UA Local 100/146.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doJohnson Controls Inc. is looking for forward-thinking talent to join our growing organization. During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant building automation technologies in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.We are looking for a skilled mechanic who has experience with air cooled or water-cooled machines to work with top of the line commercial and industrial equipment.We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.What we look forRequiredMust be a member of or willing to join the local United Pipefitters Association (UA Local 100/146).Journeyman status required.Minimum of 5 years of practical working experience on air- cooled and water-cooled chillers with strong HVAC/ mechanical troubleshooting experience.You may be required to pass a knowledge examination to assess proficiencies.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, and valid driver's licenseJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

$25.00/hourShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise. What You'll Do: As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures. Perks You'll Get: Bi-weekly hourly wage (New York and Puerto Rico: weekly wage) On-the-job training to expand your automotive abilities and help to obtain ASE Certificates Paid time off Medical, dental and other insurance Flexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expenses Retirement benefits (401k) Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars * Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License and good driving record At least 2 years of auto repair experience or coursework with automotive certifications 1 ASE certification (ability to acquire 2 additional ASE certifications within first year) Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/Diesel Comfortable working in a mechanical shop with moderate or loud noise levels Must have a complete set of tools required for auto repair and maintenance Basic computer skills including typing, data entry Must be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehicles Must be 18 years of age and legally authorized to work in the United States Previous Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate. Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. DallasTexasUnited States of America

StandardAero offers:Competitive wagesGenerous paid time offInsurance includes medical, dental and vison benefitsRetirement wages Clean, modern, air-conditioned facilitySafety focused cultureAdvanced opportunities Build an Aviation Career You're Proud OfYour work ties us all together, helping our teams' function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks.Quality InspectorAs an Aircraft Engine Quality Inspector, you'll provide quality assurance support for all company products and processes to ensure that the highest standards for quality are maintained. Monitors processes, develops improvements and interfaces with functional departments to achieve customer satisfaction and to resolve issues through cooperative methods.What you'll do:Reviews factors in light of quality of product and reliability of quality during production.Conducts internal audits on departments and business units to ensure compliance with company instructions and policies.Ensures compliance to the applicable quality procedures affecting the production process in the cell.Participates in continuous improvement of cell processes.Research, compiles and reviews company procedures.Collects and analyzes quality data for the purpose of identifying trends with respect to non-conformance documents.Reports necessary information and offers solutions to production, materials and the company as a whole, to correct specification or process problems that are occurring.Monitors warranty procedures including investigation, root-cause, corrective action and follow-up to ensure that continuous improvement is occurring.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Verifies the completion of the work instructions identified on the task control number (TCN) and the correct configuration and identification of the end product to ensure task compliance. Carries out special projects as assigned.What you'll need: Strong planning, organizational, analytical, leadership, interpersonal, decision making, oral and written communication skills.Thorough knowledge of company instructions, company processes, quality and original equipment manufacturer manuals.Knowledgeable in the assembly methods and techniques used.Proficient in the use of precision measuring instruments.Knowledgeable in the quality requirements relating to the production process.Thorough knowledge of Foreign Certification requirements and other regulatory bodies.Thorough knowledge of ISO 9000 quality system requirements.Thorough knowledge of AS9110, SABERThorough knowledge of Cost of Poor QualityThorough knowledge of Corrective Action Request Thorough knowledge of internal audit policies and procedures.Thorough knowledge of quality improvement tools and techniques.Working knowledge of Microsoft Office (Word, Excel, Access, PowerPoint, Outlook).Working knowledge of production management computer systems.College diploma in mechanical engineering technology; or equivalent.Experience as an inspector in an aerospace environment.Must be authorized to work in the US.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Overview: OVERVIEWEnjoy top hourly pay plus a competitive bonus plan, a four-day workweek, and a great benefits package (medical, dental, & vision, PTO, and 401k).Our Mobile Automotive Technicians enjoy a fully equipped, company provided van with state-of-the-art tools, company iPhone with access to resources like Mitchell Pro-Demand, as well as a growing client base that comes from being part of one of U.S. News’ Best Companies to Work For.You can grow and advance your career through on-the-job training and paid training opportunities. In addition, AutoNation Mobile Service is part of AutoNation which allows our mobile technicians incredible growth opportunities throughout the United States. AutoNation Mobile Service is fast-growing and now is the right time to get in!Our Technicians are paid based on an industry-leading technician wage grid that provides a pay range from $22.00 to $37.00 an hour, based on a combination of experience and certifications.WE WILL DEPEND ON THIS PERSON TO Perform vehicle repairs within regular scope of work (excluding tasks such as steering rack, fuel tank, engine teardown)Diagnose and assess circumstance and situation, depending on scope of work, either perform repair or sublet repair to partner shopsDiagnose and repair vehicles to ensure customer needs are metProvide labor and time estimates for additional automotive repairsEncourage customers to schedule recommended work with fact-based selling and automotive expertiseBe part of a team that cares about customers and their carsWork as part of a team to solve technical problems quickly and effectivelyPerforms other duties as requested by managerMust be able to remain in a stationary position for 50% of the timeMust have the ability to lift up to 50 poundsYOU SHOULD HAVEMinimum of 7 years of recent professional automotive repair experienceMaster level ASE certification or equivalentKnowledge in working and using repair shop software (All Data, Mitchell 1, etc.)Valid driver's license (clean background)Pass a pre-employment drug screenA desire to provide an extraordinary customer experienceComfortable working in varying environmentsSpeaking and writing in English is required, Spanish is a plusHigh school diploma or the equivalentWORKING WITH USFlexible Schedule: 4 days on, 3 days off every week!Competitive Pay (DOE)Paid vacation timeMedical, dental, and vision insurance401(k) matching 50% up to first 5%Access to state-of-the-art tools and equipment (you do not bring your own)Company branded vehicle provided for use during work shiftsWork clothes (uniforms) providedCasual atmosphere and great people to work withDOT Prerequisites: Employment will be contingent upon the successful completion of all prerequisites required by the U.S. Department of Transportation (DOT) / Federal Motor Carrier Safety Administration (FMCSA) regulations, including a physical and medical certification. Company OverviewAutoNation, a provider of personalized transportation services, is driven by innovation and transformation. As one of America's most admired companies, AutoNation delivers a peerless Customer experience recognized by data-driven consumer insight leaders, Reputation and J.D. Power. Through its bold leadership and brand affinity, the AutoNation Brand is synonymous with "DRVPNK" and "What Drives You, Drives Us." AutoNation has a singular focus on personalized transportation services that are easy, transparent, and Customer-centric.BenefitsClick here to learn more about our Benefits.Join us as we pave the way to moving our company, our communities and our industry forward. Apply today at a location near you or wherever you dream the road will take you.AutoNation is an equal opportunity employer and a drug-free workplace.

Req ID:436570Address: 1021 Dale Evans Italy, TX, 76651Benefits: * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Specific Duties and Responsibilities: Perform daily mechanical inspections and repairs to ride structures and unitsMaintain and trouble shoot amusement rides and park equipmentMaintain records for maintenance and inspections performedWork with other departments as needed to complete dutiesMaintain compliance with all safety rules, procedures, and regulationsMaintain positive interaction with other employees and guestsOther tasks and duties as assigned Job Requirements: Must be at least 18 years old, and possess a high school diploma or equivalentA varied skill set including knowledge of general maintenance, welding, and machine shop repairMust have experience in industrial or heavy equipment maintenance and repair procedures Must be able to work flexible hours including days, nights, weekends, holidays, and extended hours as scheduledMust be willing to work under various weather conditionsMust be able to lift up to 50lbs.Highly motivated, self-starter and great time managementMust have own basic hand toolsMust be able to climb and work at heights over 50 feetMust be able to stoop, bend, and lift regularlyMust have a valid driver’s license, a good driving record If you are able to answer "YES" to all of the following questions, please continue the application process by clicking "Apply" Can you provide legal documentation establishing your identity and eligibility to be legally employed in the United States Are you able to perform the essential functions of the job for which you are applying with or without reasonable accommodation Within the last 90 days, can you state that you have not used illegal or social drugs (excluding marijuana), such as MDMA (Molly), cocaine and crystal methamphetamine I am willing to agree that future text messages relating to Six Flags, Inc., including company news, job posting application status updates, and other information, may be sent on behalf of Six Flags, Inc. to the cell phone number I provide.

BlueTriton is a leading provider of spring and purified water products - the name behind your favorite bottled water brands. We are proud to offer an extensive portfolio of highly recognizable, responsibly sourced, and sustainably packaged spring water in addition to other quality products and services. Get ready to quench your thirst with exciting possibilities when you join BlueTriton for a fiercely good career doing work that matters.Water might seem simple enough, but there is a lot going on beneath the surface. Working in a factory or warehouse requires rolling up your sleeves to get things done and the tenacity to go the extra mile again and again. We believe the rewards are worth the effort: a business you help shape, a supportive team you learn from, and the chance to have a sustainable impact in which you can truly be proud.Job DescriptionWe are currently seeking a Maintenance and Reliability Supervisorreporting to the Packaging Reliability Manager and based in a Factory with Remote eligibility (Location TBD). This position will be responsible for leading the development, implementation and continuous improvement of all packaging equipment (Filling through End of Line). Based on area of expertise the Reliability Owner will have a specific machine center to own Safety, Quality and Performance targets. For example: If Filler/ Capper is a strength, this may be the initial focus area of a Packaging Reliability Owner.Key responsibilities for this position include but are not limited to the following:Responsible for leading a Reliability Centered Maintenance Program at the Market Level for specific area of expertise or focus.Support the design and optimization of Reliability Centered Maintenance Plans including, condition and time-based maintenance, to ensure machine reliability targets are met utilizing SAP Computerized Maintenance Management System (CMMS). BlueTriton Guiding Principles for People and Preventive Maintenance will be used as a guide to develop, coach and lead the Factory Reliability Team to achieve maintenance plan execution, breakdown analysis, major overhauls, troubleshooting and line down situations.Lead, Coach and assist in the documentation and completion of Before and After-Action summaries on all major maintenance events in support of continuous improvement of maintenance plans to help with reduction of Safety/Quality Risks, Energy/Scrap and to Improve Machine Reliability.Support the Annual Zero Based Maintenance budgeting process with ownership of all reliability centered maintenance plans for area(s) of focus.Assist in establishing and maintaining factory Technical Capability by supporting and maintaining the data base of training material to support capability building. This will include but is not limited to SOP's, VWI's, OPL's, Instructional Videos etc. for all Maintenance, Safety and Environmental related activities by ensuring internal and external compliance. Responsible to support Factory Escalations (during and after hours ) Innovation and Engineering both proactively and reactively to ensure Development of Self and Associates through Coaching, Training and Feedback.Travel of up to 75% will be required to achieve desired level of Factory Support and successful closure of activities and escalations.QualificationsKey qualifications for this position:3 to 5 years of industrial maintenance experience, preferably in bottling in CPG (consumer packaged goods) or food and beverage industriesProject or Technical lead in a factory: proven experience in supporting and supervising multiple projects at once.Leadership exposure across several functions with developed communication skills.Maintenance and technical leadership experience within highspeed packaging, ideally beverage, food or other clean manufacturing. Proven track record in delivering results by working with cross-functional teams. Ability to develop people through mentorship and coaching.Basic understanding of Continuous Improvement methodologies.(LEAN ,DMAIC, 5why, BDA, TPM).Able to recognize strengths and help factories build high performing teams.Working knowledge and understanding of AMM / CPMS systems (SAP Preferred). Proficient in Microsoft Office Suite (Excel, Word, PowerPoint, Outlook, TEAMS).Self-motivated and able to manage time and schedule travel to achieve objectives independently.Must be able to travel up to 75%.BlueTriton Brands, Inc. (“BlueTriton”) is a water and beverage company in North America that produces and distributes a portfolio of brands of spring water, purified water, and other beverages, which include Poland Spring®, Deer Park®, Ozarka®, Ice Mountain®, Zephyrhills®, Arrowhead®, Origin, Saratoga®, AC+ION®, Pure Life®, B’EAU®, and Splash Refresher. BlueTriton also owns and operates ReadyRefresh®, a water and beverage delivery service for homes and offices. Headquartered in Stamford, Connecticut, BlueTriton is a privately held company with operations and distribution primarily in the United States and Canada, employing more than 7,000 employees. BlueTriton manages water resources for long-term sustainability and helps protect more than 20,000 acres of watershed area owned by the company from harm and destruction. The company sources from 56 springs and has 30 production facilities across North America, with some verified to the Alliance for Water Stewardship Standard. BlueTriton is a Water Champion with The Water Council and has committed to be verified under their WAVE program.BlueTriton Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. BlueTriton Brands is committed to providing reasonable accommodation for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please contact us at

Why You Should Join the Service Experts Team Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth.Join us and become an EXPERT!Service Experts Company Perks and Benefits for YOUGenerous PTO provided:20 paid days off within your first year of employment (vacation & national holidays)25 paid days off after your 2nd year of employmentNo layoffs during “Slow Season” – due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ample advancement and career-growth opportunities available across the U.S.Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programsWe provided wellness program options for free employee medicalCompany-provided smart phone, tablet, uniform plan, and tool replacement programWe’ll make you better at what you do with our internal Training AcademyBest-in-class 401(k) Retirement Savings Plan with attractive company matching contributionsCompany-paid employee Life Insurance with options for YOU and your Family!Short-term and Long-term disability insurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Key Responsibilities:Works under minimal supervision to perform residential and/or light commercial service and maintenance calls Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks Completes routine maintenance and equipment cleaning as needed or required Responsible for delivery and removal of parts and equipment needed to complete service work Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer. Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit. Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for Represents the company professionally, honestly, and ethically in all business matters and activities Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed Performs similar/other duties as needed or assigned Regular, reliable attendanceHealth & Safety Roles and ResponsibilitiesReports any unsafe acts, conditions and hazards to direct supervisor/manager immediatelyReports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediatelyCorrects substandard acts or conditions within area of controlUses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s)Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or wornComplies with the general rules as prescribed by company program(s) procedure(s)Operates devises or equipment as prescribed by company program(s) or procedure(s)Participates in any safety initiatives, teams, or committeesReports all injuries or incidents as prescribed by company program(s) or procedure(s) immediatelyProvides input on developing safety initiatives and plans to eliminate exposures that could cause accidentsDoes not perform act that may endanger the safety or well-being of othersDoes not engage in any pranks, contests, or rough boisterous behaviorWorks in compliance with applicable legislative requirementQualifications:High school diploma or GED with additional training and 2 to 5 years’ experience in HVAC with technical training certification required Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area EPA and safety certifications required Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories Proficient mechanical aptitude and the ability to operate all necessary tools and equipment Proficient and able to operate all necessary tools and equipment to perform various service projects Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision Proficient and able to install a basic duct fitting Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns Effective and efficient time-management and organizational skills Valid driver’s license with acceptable driving record Available to work flexible hours and on-call shifts as needed Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl. Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception Ability to lift up to 75 pounds and ability to lift and carry items weighing up to 50 pounds

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily . WHAT WE OFFER We are a large company serving many unique customers - because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering: Ongoing Education & Training Exposure to a Large Variety of Projects Industry-leading Benefit Packages Advanced support and tools designed to improve your workflow Pay from $35 - $50/hour DOE Sign on bonus up to $3,000 DOE Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time. Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers' expectations Provides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner. Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base. Test malfunctioning systems and components using electrical and/or mechanical skills. Maintain legible corporate and personal records of work history. Provides department support by processing job tickets, and work orders to the necessary department promptly. Provide support by picking up, delivering, and installing cases. Perform work on minor construction and remodeling projects including startups of new installations. Drives company vehicle in a safe manner. Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED. EPA certification. Certification from an accredited vocational-technical or trade school is a plus! Minimum 5+ years of commercial refrigeration experience required. Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus. Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. Must have a good driving record and be able to work independently. Emergency on-call availability is a basic requirement. Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

The pay range per hour is $34.85 - $40.25Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Engineering & Facilities - Maintenance Technician 2 (MT2)About job:up to $2.50 shift differential or key premium based on KeyTuition Reimbursement ProgramBenefits eligible within two weeks of employmentCurrently hiring for below shift:A1 Key - Saturday, Sunday, Monday from 6:00am to 6:00pmAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and suppliesCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)Target will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Target store or Supply Chain Facility or reach out to Guest Services at 1-800-440-0680 for additional information.

Job DescriptionBe part of the future!We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to making a difference.What we offer:Competitive Starting PayOn The Job Paid TrainingTuition ReimbursementUnlimited Career PathGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd more!What you will doAs an HVAC Truck Based Senior Controls Technician, you will perform HVAC control systems programming, troubleshooting, installation, commissioning, and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components.In addition, you will:Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment.Provide front-line technical and repair support through effective communications with Johnson Controls customers.Provide system repair and or update recommendations and assist in proposing recommendations to Johnson Controls customers.Be part of an expanding team of the best technicians in the industry while you build a career with a first-class global organization.How you will do itLoading Johnson Controls field and network-level controller software.Performing commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e., Sensors, actuators, et c.) and completing all required commissioning documentation.Keeps management and JCI contractor or customer informed of job progress and issues.Calibrates systems require basic electronic test equipment.Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation.Documents change and provides information for as-built documentation.Execute company sponsored as well as personally initiated training to ensure the highest level of knowledge and capability is maintained.Engage with customers to fully understand their systems and needs.Communicates with the JCI contractor or customer upon arrival and before leaving the work site.Follows all safety standards and attends required safety training. A high degree of regard for employee and subcontractor safety.What we look forRequired:Demonstrated technical aptitude in mechanical and electro-mechanical fields.Able to use hand/power tools, and electrical testing equipment such as a multimeter.A solid knowledge base in the use of personal computers.Attention to detail.Good communication and listening skills.Depending on location, the mounting and termination of low voltage devices may have special licensing requirements.Strong understanding of HVAC systems, sequence, and applicationTerms and Conditions of such benefits programs are subject to change at any time at the sole discretion of the Company.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

StandardAero is one of the largest independent maintenance, repair, and overhaul providers in the aerospace industry. At our plants, our units engage in a variety of work scopes involving trouble-shooting, problem solving, and working together to embody our #1 priority, which is ensuring the safety of our people and our product.At StandardAero, we offer:A clean, safe, and temperature-controlled work environment.Competitive compensation structures and a total rewards package.An opportunity to work with a variety of aircraft engines.A variety of shifts and hours.Opportunities for horizontal and vertical movement within the organization.ENGINE MECHANIC (CFM56)Build an Aviation Career You're Proud OfYour work ties us all together, helping our teams function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks.As an Engine Mechanic (CFM56), you'll maintain, repair, and overhaul aircraft engines, modules, components and accessories to assure compliance with established company standards, contractual obligations and airworthiness regulatory requirements. Performs technical troubleshooting using mechanical ability and extensive product knowledge. Cross trains in other complementary skills as needed to support production requirements.What you'll do:CFM56 Engine experience is preferred.Perform dismantling and assembly of complete engines, modules, components and assemblies in accordance with all customer, regulatory, and company requirements using hand or power tools.Troubleshoot to identify problems and adjusts and repairs products according to specifications and established procedures.Interpret technical specifications, directives and relevant publications to identify product discrepancies and deficiencies.Interpret technical standards, drawings, specifications, and other relevant documentation using mechanical precision measuring tools and instruments as required; verifies the conformance of parts to manuals and blueprints with respect to measurements.Use machines, tools, jigs, fixtures, gauges, plant equipment and consumables necessary to carry out the required tasks.Check for serviceability, conformity documentation completeness and compatibility to applicable standards.Replace defective parts and reassembles units ensuring conformance with applicable regulations and manufacturer's specifications.Maintain detailed repair and certification records and reports of work performed.Participate in continuous improvement of cell processes.Cross train in other complementary skills and seeks endorsements for those skills as needed to support production requirements.Move between production assignments that utilize multiple skills endorsements as needed to support production requirements.Participate in cross training of other technicians as needed to support production requirements.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carry out other duties as assigned.Position Requirements: Ability to read, understand and interpret schematics, graphs, blueprints, and other technical information.Ability to lift up to 50 pounds (unassisted) for approximately 25% of the average work day.Regularly required to stand for prolonged periods.High degree of mechanical aptitude, accuracy and precision.Knowledgeable and proficient in the proper use of precision measuring equipment.Working knowledge of production management computer systems and other related internal control systems.Ability to follow and understand related company instructions, company processes, overhaul manuals, and original equipment manufacturer's manuals.Specialized training in engineering or aircraft maintenance (AME, A&P, AMT); or equivalent preferred.Experience as an aircraft mechanic in an aerospace environment.Ability to workday shift or second shift as required.CFM56 engine MRO experience preferred.Major Module removal and installation (Engine to Modules)Module Disassembly and Assembly (Modules to Submodules)Submodule Disassembly and Assembly (Submodules to Piece Parts) Must be authorized to work in the US.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Key Job Duties and Responsibilities: Create and update seasonal maintenance staff schedules according to management specifications.Ensure all time and pay is approved in a timely manner within payroll timelines.Input, create, and process purchase requests for maintenance department as needed.Create, update, and maintain all ride bulletins, manuals, and Maintenance library.Ensure that all contracts, indemnities, and other related documents are created, approved, signed, and filed as needed.Other duties as assigned. Job Requirements: Must be available for work on weekdays, since typical working schedule will be Monday-Friday 8am to 4:30pm.Proficiency in Microsoft Office, Optim8, Maximo, and Microsoft Project Manager a plus.Must be able to walk through heavy construction sites to provide photo documentation.Strong communication skills, both oral and written.Must be self-motivated, detail-oriented, and work well with others.Must be able to work in a fast-paced environment.Must be able to drive passenger vehicles.Candidates must be at least 18 years of age.One year of park experience preferred.

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily . WHAT WE OFFER We are a large company serving many unique customers - because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering: Ongoing Education & Training Exposure to a Large Variety of Projects Industry-leading Benefit Packages Advanced support and tools designed to improve your workflow Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: 3+ years of commercial experience as an HVAC and Refrigeration Technician Active EPA Certification Valid driver's license Excellent customer relations and interpersonal skills Mechanical aptitude and troubleshooting skills Ability to safely lift to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

What you will doJohnson Controls Inc. is looking for forward-thinking talent to join our growing organization to support the fast-growing Data Center market. You will be part of a new centralized team supporting Data Center customers in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facility HVAC chiller and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.We are looking for skilled HVAC Technicians who have experience with air cooled and/or water-cooled chillers or large roof top ducted units to support the growing data center market. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a vital member of a new North America Data Center team responsible for startup, commissioning, and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of 3 years of practical working experience on air cooled and/or water-cooled chillers or large roof top ducted units with strong HVAC/ mechanical troubleshooting experience.Travel 50% to 60% within North America to support Data Center Customers startup and commissioning activities as well as aftermarket service trouble shooting.You may be required to pass a knowledge examination to assess proficiencies.Willing to invest in career development. You will enroll in training programs to gain knowledge in HVAC products supporting the Data Center Market.You will work with local market technicians and when necessary, provide on the job training.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, good driving record and valid driver's license.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

SPECIFIC DUTIES AND RESPONSIBILITES: Install, maintain, and repair heating, air-conditioning, refrigeration, and ice house equipmentMaintain and assist in the control energy management systemsRespond to service calls and expedite repairsMaintain preventative maintenance schedulesMaintain records of equipment installed and removedMaintain and repair make-up exhaust air handling units, including fans and motorsMaintain and repair chiller units and associated equipmentWork with various departments to ensure safe and timely repairs are completedGeneral Mechanical and Plumbing experience a plus SKILLS AND QUALIFICATIONS: Must be at least 18 years of age and possess a high school diploma or equivalentAt least 3 years commercial, industrial HVAC experience preferredCurrent EPA license (or obtain within 6 months)Must be able to work varied shifts, days, nights, and weekends including extended hours when required and willing to work under various weather conditionsMust be physically fit and able to climb stairs/ladders up to heights of 50 or more feetMust be able to lift up to 50 pounds and stand for extended periods of timeMust be able to stoop, bend, and lift regularlyMust be self-motivated and able to perform tasks with minimal supervisionAble to provide own basic hand toolsMust possess a valid driver’s license, a good driving record, and successfully complete all authorized employment screenings and criminal background checks If you are able to answer "YES" to all of the following questions, please continue the application process by clicking "Apply" Can you provide legal documentation establishing your identity and eligibility to be legally employed in the United States Are you able to perform the essential functions of the job for which you are applying with or without reasonable accommodation Within the last 90 days, can you state that you have not used illegal or social drugs (excluding marijuana), such as MDMA (Molly), cocaine and crystal methamphetamine Are you willing to comply with our grooming code which prohibits facial jewelry (other than 2 matching pairs of earrings), extreme haircuts/styles, colors, and visible tattoos on or above the neck or any single tattoo or cluster of tattoos larger than 4” by 4”. (Please answer “YES” if you believe you would qualify for a religious accommodation which might exempt you.)I am willing to agree that future text messages relating to Six Flags, Inc., including company news, job posting application status updates, and other information, may be sent on behalf of Six Flags, Inc. to the cell phone number I provide.

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily . WHAT WE OFFER We are a large company serving many unique customers - because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering: Ongoing Education & Training Exposure to a Large Variety of Projects Industry-leading Benefit Packages Advanced support and tools designed to improve your workflow Pay from $30 - $50/hour DOE Sign on bonus up to $3,000 DOE Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time. Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers' expectations Provides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner. Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base. Test malfunctioning systems and components using electrical and/or mechanical skills. Maintain legible corporate and personal records of work history. Provides department support by processing job tickets, and work orders to the necessary department promptly. Provide support by picking up, delivering, and installing cases. Perform work on minor construction and remodeling projects including startups of new installations. Drives company vehicle in a safe manner. Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED. EPA certification. Certification from an accredited vocational-technical or trade school is a plus! Minimum 3+ years of commercial refrigeration experience required. Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus. Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. Must have a good driving record and be able to work independently. Emergency on-call availability is a basic requirement. Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

What you will doJohnson Controls Inc. is looking for forward-thinking entry level talent to join our growing organization to support the fast-growing Data Center market. You will be part of a new centralized team supporting Data Center customers in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facility HVAC chiller and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.We are looking for entry level skilled HVAC Technicians who have experience with air cooled chillers or large roof top ducted units to support the growing data center market. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a vital member of a new North America Data Center team responsible for entry level startup, commissioning, and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of 1 year of practical working experience on air cooled or large roof top ducted units with some HVAC/ mechanical troubleshooting experience.Travel 50% to 60% within North America to support Data Center Customers startup and commissioning activities as well as aftermarket service trouble shooting.You may be required to pass a knowledge examination to assess proficiencies.Willing to invest in career development. You will enroll in training programs to gain knowledge in HVAC products supporting the Data Center Market.You will work with local market technicians.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, good driving record and valid driver's license.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Specific Duties and Responsibilities: Perform daily mechanical inspections and repairs to ride structures and unitsMaintain and trouble shoot amusement rides and park equipmentMaintain records for maintenance and inspections performedWork with other departments as needed to complete dutiesMaintain compliance with all safety rules, procedures, and regulationsMaintain positive interaction with other employees and guestsOther tasks and duties as assigned Job Requirements: Must be at least 18 years old, and possess a high school diploma or equivalentA varied skill set including knowledge of general maintenance, welding, and machine shop repairMust have experience in industrial or heavy equipment maintenance and repair procedures Must be able to work flexible hours including days, nights, weekends, holidays, and extended hours as scheduledMust be willing to work under various weather conditionsMust be able to lift up to 50lbs.Highly motivated, self-starter and great time managementMust have own basic hand toolsMust be able to climb and work at heights over 50 feetMust be able to stoop, bend, and lift regularlyMust have a valid driver’s license, a good driving record If you are able to answer "YES" to all of the following questions, please continue the application process by clicking "Apply" Can you provide legal documentation establishing your identity and eligibility to be legally employed in the United States Are you able to perform the essential functions of the job for which you are applying with or without reasonable accommodation Within the last 90 days, can you state that you have not used illegal or social drugs (excluding marijuana), such as MDMA (Molly), cocaine and crystal methamphetamine I am willing to agree that future text messages relating to Six Flags, Inc., including company news, job posting application status updates, and other information, may be sent on behalf of Six Flags, Inc. to the cell phone number I provide.

Build your best future with the Johnson Controls team As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer: Competitive salary15 days Paid vacation first year plus holidays & sick time Comprehensive benefits package including 401K, medical, dental, and vision care On the job/cross training opportunities Encouraging and collaborative team environment Dedication to safety through our Zero Harm policyHVAC Service ManagerWhat you will do Under general direction of the branch service manager, manage day-to-day service business of the team, grows labor and material, service agreement portfolio, delivers customer satisfaction plans, including revenue, gross margin, and service asset management.Deploys and maintains standardized tools, systems, and support for the assigned service team. Manages resources to maximize customer satisfaction and improve productivity and profitability and ensures overall operational excellence and service growth. Effectively recruits, develops, and retains employees. Ensures overall operational excellence and service growth. How you will do it In this role, you will: Leads the execution efforts of the service team business. With a focus on ensuring consistency of delivery of the team’s execution business and meeting financial objectives. Drives profitable growth through effective management of assigned customer portfolio in a manner that meets or exceeds profitability goals. Develops strategic operating plans for assigned service business which aligns with branch and regional goals and visions. This includes participating in strategic account plans, annual financial and operating plans and revenue and margin forecasts. Leads efforts to identify, secure and retain service customers by actively networking with community business, governmental and professional leadership; establishing relationships that enhance the local reputation of Johnson Controls and the branch, ensuring referrals and proposal requests in a timely matter. Builds an environment that energizes team members to provide high quality, cost efficient, customer-directed service and exceed performance targets. Recommends and supports staffing requirements for the assigned service business. Serves as a communication channel to share the best practice strategies and results with peers that will enable growth.Audits the effectiveness of team’s service operations and makes changes to improve performance. Ensures that contractual obligations are completed, and customer satisfaction is achieved. Drives team operational review meetings, reviewing proposals and estimates for accuracy. Coaches on appropriate levels of operating and overhead expenses incurred in service operations. Leverages service operations activities and functions across assigned territories. Ensures that tools and processes are executed according to established standards to achieve customer satisfaction at the most effective cost. Together with the sales team, manages the appropriate assignment of customer accounts between service operations and sales. Executes other managerial responsibilities, i.e., hiring, performance reviews consistent with established business strategy. Prepares and delivers clear performance expectations, performance reviews and development plans for direct reports teaming with the appropriate matrix functional manager. Ensures a consistent level of coaching, which includes monthly ‘one-on-one(s)’, operational and financial reviews. External Relationship: The service manager is actively involved in the local service community, industry organizations, and charity organizations and face-to-face networking with technical schools, community colleges, and local union leadership. Internal Relationships: Assists the Branch Service Manager on the successful execution of the service strategies and objectives. Assists the Branch Service Manager to effectively plan operational resource needs and assists in allocating resources throughout the assigned territory to meet near term commitments. Assists the Branch Service Manager in the preparation of the annual service financial operating plan. What we look for:Desired competencies/behaviors Bachelor’s degree in engineering or business or equivalent work experience. Five or more years of progressively more responsible operations management and P&L experience in the Service Industry including five or more years of direct management experience. Previous sales and/or Account Management experience desired. High-level competence in written and verbal communication. Able to lead and direct diverse teams. Proficiency in MS Office applications.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.