Come to work and be ready to think on your feet, grow your skills, and embrace the many opportunities. Our Distribution Centers are the key to getting new products out to TJ Maxx, Marshalls, HomeGoods, Sierra, Winners, Homesense, and TK Maxx. To keep up with our ever-changing inventory, we stay nimble and adaptable. No day is the same, and that’s just how we like it. Every shift is a new opportunity to Discover Different - and support each other along the way.Lead all aspects of the Maintenance Team (multiple technicians) in our HomeGoods facility. This Supervisor is responsible for the upkeep and repair of the equipment, building, and grounds-- specifically including the electrical, HVAC, conveyor hi-rackers, transporters, fire prevention equipment, and safety programs. Coordinates with local contractors and vendors to obtain high quality, cost effective service equipment.ResponsibilitiesSupervise a shift of 10-15 maintenance staffDevelop, counsel, motivate, and resolves associate relations issues. Provide a good working atmosphere. Conduct performance appraisals and monitor performance of all associates.Maintain efficiency and safety of all equipment. Monitor the daily operation and direct action as required.Coordinate daily maintenance of equipment. Consult with Maintenance Staff, Engineering, and Production-Personnel to determine future requirements.Coordinate with the Managers and Supervisors to establish priorities and schedule the work load to satisfy production needs.Coordinate with local contractors and vendors for equipment and services as required.Order parts and equipment and obtains services for repair and maintenance of the facility's equipment.Complete reports and perform other administrative duties as required.Qualifications:3-5 years of conveyor-systems experience within a distribution center.Strong knowledge of building codes, trade standards, and general practices within the maintenance industry.Solid understanding of electrical, mechanical, construction, plumbing, and HVAC.Minimum 2 years of supervisor experience supervising Mechanics.A formal education in desired/related field (at least a 2-year training program) is strongly preferred.College experience is helpful, but not required. Must be a High School graduate.Must have working proficiency in Microsoft Excel.Come Discover Different at TJX - we think you’ll find that it’s so much more than a job. We move a lot of inventory - at all times of the day - and that takes working, learning, and growing together. When you’re a part of our TJX family, you have the full support of a diverse, close-knit team in our Distribution Centers.As you think about where to work, know that we take care of our people. We offer competitive pay and great benefits. We consider all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status. We also provide reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.

The pay range per hour is $27.80 - $33.19Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Engineering & Facilities (MT1)About job:Tuition Reimbursement programBenefits eligible after two weeks of employmentCurrently hiring for below shifts:L2 Shift: Wednesday - Saturday from 2:30pm - 12:30am ($1.50 shift differential)L3 Shift: Wednesday - Saturday from 10:30pm - 8:30am ($2.50 shift differentialAbout us:As a Fortune 50 company with more than 400,000 team members worldwide, Target is an iconic brand and one of America's leading retailers. Working at Target means the opportunity to help all families discover the joy of everyday life. Caring for our communities is woven into who we are, and we invest in the places we collectively live, work and play. We prioritize relationships, fuel and develop talent by creating growth opportunities, and succeed as one Target team. At our core, our purpose is ingrained in who we are, what we value, and how we work. It’s how we care, grow, and win together. Target is an iconic brand, a Fortune 50 company and one of America’s leading retailers. Target Global Supply Chain and Logistics is evolving at an incredible pace. We are constantly reimagining how we get the right product to the guest better, faster and more cost effectively than ever before. We are becoming more intelligent, automated and algorithmic in our decision-making, so that no matter how our Guest chooses to shop—in stores or on Target.com—we deliver the convenience and immediate gratification they demand and deserve. We are on a mission to win decisively over any competitor, with a seamless and superior guest service experience unlike any they can offer. Our teams work with the agility our mission requires, and we constantly come together to implement new processes in record time.A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 1 (MT1), you will maintain and repair automated material handling and facility equipment, and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target mechanics to solve problems, validate quality of work for outside specialty contractors, and meet aggressive time lines. You will collaborate with Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You will operate Target owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies as needed. This is an entry-level position in the technician role with promotion potential to Maintenance Technician 2, by completing and demonstrating proficiency in all related Maintenance Technician 2 job requirements, measured by both hands-on validation and by a written assessment. A successful candidate in this role will:Maintain and perform basic troubleshooting of electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, scales and printer applicatorsDemonstrate mechanical proficiency for hydraulic and pneumatic systems, and AC/DC electrical motors and drivesAdjust, reset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Maintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsPerform preventative maintenance on facility equipment (i.e. Powered Industrial Trucks, HVAC, air compressors and dryers, and balers)Perform basic electrical maintenance and simple repair/replace of various electrical circuits and related electronic equipment, using tools such as multi-meters and infrared thermometers Read and understand basic electrical and electronic schematicsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes or cartons up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licenseBasic PC competency and ability to use mobile apps on handheld devicesFamiliar with simple wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresCommonly used industrial toolsBasic Carpentry and PlumbingBasic blueprint and schematic readingBasic AC/DC electrical and electronic principlesBasic metal fabrication and weldingBasic Industrial ControlsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with Programmable Logic Control (PLC) programs and Human Machine Interfaces (HMIs)Ability to troubleshoot basic Input/Output functionsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)Target will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Target store or Supply Chain Facility or reach out to Guest Services at 1-800-440-0680 for additional information.

Fire Sprinkler Inspector Arlington, TX, USA Texas, USAReq #1062 Friday, April 26, 2024 Established in 2009, Impact Fire Services was the vision of a group of experienced industry professionals that wanted to build a best-in-class fire protection and life safety company. Through superior customer service and technical expertise, we have developed long-standing relationships with the leading businesses in our markets. We are a full-service fire protection company, providing installation, maintenance, inspection, monitoring, and retrofit of fire safety systems. Come join a dynamic team of fire protection professionals, many of whom carry NICET and manufacturer certifications in leading brands. Impact Fire has deep experience supporting many industries including retail, healthcare, education and restaurants. Today, we operate over 30+ district offices and employ over 1,100 employees across multiple states throughout the USA. At Impact Fire Services you can learn a trade with multiple career paths in fire and life safety while benefiting from an employee focused company culture that allows you to gain mentorship and training provided by leading experts at one of the fastest growing companies in the industry. Whether you have transferable skills, prior industry experience, or are looking to start your journey, our apprenticeship programs will give you the support and knowledge you need to go further in your career. Why work with us At Impact Fire, we are a group of hardworking, dedicated fire protection professionals committed to protecting lives and property from fire. Our cohesive team spirit and customer service-oriented culture are expressed in all that we do. We operate with the belief that every team member plays a critical role in our success. We operate in 30+ district office locations across the United States, supporting industries ranging from retail and healthcare to education and restaurants. Please text “ImpactFire” to to connect with Ember, Impact Fire’s Recruiting Assistant, to learn more about this position and the company.Benefits of joining Impact Fire Services When you join Impact Fire you will receive:Competitive compensationCareer Advancement Opportunities Competitive benefits, including healthcare, dental, vision, life insurance, paid time off and holidays Company paid short and long-term disability Immediately vested in our 401(k) company match Exceptional guidance and support from our managers Collaborative culture & environmentRobust training opportunities with company reimbursement upon achieving required licensing Apprenticeship programs for fire sprinkler, fire alarm and inspection positions Opportunity to work alongside some of the best talent in the fire protection industry Perform inspection and testing of fire sprinkler, fire alarm systems with knowledge of multiple manufacturers’ products. Provide accurate and detailed inspections reports with all proper documentation of improvements and complications. Perform inspections on large projects.$5,000 Sign-On-Bonus!!!Position is located in Arlington, Texas.JOB RESPONSIBILITIESPerform routine inspections, testing and services of life safety product lines with minimal supervision.Responsible for operating with minimal supervision while performing fire protection inspections.Daily communications with Project Manager and/or Schedule Coordinator on inspection or project delays, requirements and general status of jobWork with Project Manager, Schedule Coordinator and Office Administrative Staff to ensure complete closeout and turnover of jobs to the client (Confirm that work is completed so it can be billed in full).REQUIRED EXPERIENCE /QUALIFICATIONSNICET Level II, RME-I & FAL, FEL-A or K, and Backflow.Must be willing to obtain or possess other applicable state licensesStrong working knowledge of life safety and NFPA codesWorking knowledge of sprinkler controls, alarm panels, devices and critical componentsWilling to perform testing on sprinkler and fire pump systems.ADDITIONAL PREFERRED EXPERIENCE / QUALIFICATIONSWilling to coordinate between inspection deficiencies and service required to correct found deficiencies.Capability to present information and respond to questions from managers, customers, AHJs (Authorities Having Jurisdiction) and the general publicAble to complete documentation and administrative duties as necessary; proficient in the use of personal computers and Microsoft Office toolsDemonstrated competency in verbal and written business communication skills.Possess and maintain a valid driver’s license in accordance with Company guidelines Successful completion of a drug test and pre-employment background screening is required. MVR checks are required for all driving positions. We look forward to talking with you about career opportunities with Impact Fire Services. For consideration, please apply on-line.Employment with an Equal Opportunity Employer (EOE) including disability/veterans. Other details Pay TypeHourly

Overview: ** Immediate opening for Sr. Automotive Repair Technicians/Mechanics ** At Parra Car Care our team strives to maintain the highest level of customer care in the automotive repair industry. We pride ourselves on providing state-of-the-art car repairs backed by a guarantee that is unsurpassed by any of our competitors.The Senior Automotive Technician is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturer's, and company repair standards. Compensation: $30.00/Hr. to $45.00/Hr. flag rate Principal Duties and Responsibilities : Diagnoses vehicles according to the appropriate level of certifications/experience. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy Performs complex and heavy-duty repairs Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file Follows all safety procedures and reports any concerns to direct supervisor Ability to work flexible schedules, including weekends as needed. Other duties as assigned by direct supervisor Adheres to Sun Auto's core values, all company policies and procedures as outlined in the Employee Handbook Qualifications : Previous automotive technician / mechanic experience required ASE certifications in lieu of experience Ability to demonstrate proper use of computerized equipment for diagnostics Valid Driver's license in the work State (out-of-state driver's licenses must be transferred to work state within 30 days of hire) Possess State Inspector License or ability to obtain a State Inspector license (in applicable locations) within 30 days of hire date High School Diploma or equivalent; Technical School experience preferred Working Conditions and Physical Demands : The Senior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions. The Senior Automotive Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently. Communicate with customers and shop personnel Vision sufficient to detect color, depth, and re-focus Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#bayard

Pay: $19.50 per hourTheMaintenance Technician 1versees the day to day engineering operations in the lodge. This includes but is not limited to project management, general life safety, ordering, working with vendors. Responsible for completing preventative maintenance and repairs through-out the hotel guestrooms, public spaces, equipment, buildings & grounds.Responsibilities:Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication.Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings.Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items.Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards.Ensures that all work performed is conducted in a safe and timely manner adhering to standards of safety and effective equipment utilization.Maintains working knowledge of departmental safety procedures. Attends safety-training programs and in-service as required for continued development.Maintains the necessary service records on mechanical and structural systems.Ensure all standard operating procedures are followed for park operation, employee relations, timekeeping and safety. Including ensuring all daily, weekly and monthly documentation is being completed.Other duties as deemed appropriate by the Assistant Director of Engineering.Qualifications:Technical DegreeTechnical TrainingTrade Related CertificationsHospitality, Healthcare or related industry experienceTrade related certifications preferred in HVAC and/or ElectricalMove, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Ability to complete work at heights up to 50 feet using ladders, harnesses and lifts.Computer skills including knowledge of database software, internet software, order processing systems, Microsoft Office suite.Valid Driver’s License

Overview: OVERVIEWEnjoy top hourly pay plus a competitive bonus plan, a four-day workweek, and a great benefits package (medical, dental, & vision, PTO, and 401k).Our Mobile Automotive Technicians enjoy a fully equipped, company provided van with state-of-the-art tools, company iPhone with access to resources like Mitchell Pro-Demand, as well as a growing client base that comes from being part of one of U.S. News’ Best Companies to Work For.You can grow and advance your career through on-the-job training and paid training opportunities. In addition, AutoNation Mobile Service is part of AutoNation which allows our mobile technicians incredible growth opportunities throughout the United States. AutoNation Mobile Service is fast-growing and now is the right time to get in!Our Technicians are paid based on an industry-leading technician wage grid that provides a pay range from $22.00 to $37.00 an hour, based on a combination of experience and certifications.WE WILL DEPEND ON THIS PERSON TO Perform vehicle repairs within regular scope of work (excluding tasks such as steering rack, fuel tank, engine teardown)Diagnose and assess circumstance and situation, depending on scope of work, either perform repair or sublet repair to partner shopsDiagnose and repair vehicles to ensure customer needs are metProvide labor and time estimates for additional automotive repairsEncourage customers to schedule recommended work with fact-based selling and automotive expertiseBe part of a team that cares about customers and their carsWork as part of a team to solve technical problems quickly and effectivelyPerforms other duties as requested by managerMust be able to remain in a stationary position for 50% of the timeMust have the ability to lift up to 50 poundsYOU SHOULD HAVEMinimum of 7 years of recent professional automotive repair experienceMaster level ASE certification or equivalentKnowledge in working and using repair shop software (All Data, Mitchell 1, etc.)Valid driver's license (clean background)Pass a pre-employment drug screenA desire to provide an extraordinary customer experienceComfortable working in varying environmentsSpeaking and writing in English is required, Spanish is a plusHigh school diploma or the equivalentWORKING WITH USFlexible Schedule: 4 days on, 3 days off every week!Competitive Pay (DOE)Paid vacation timeMedical, dental, and vision insurance401(k) matching 50% up to first 5%Access to state-of-the-art tools and equipment (you do not bring your own)Company branded vehicle provided for use during work shiftsWork clothes (uniforms) providedCasual atmosphere and great people to work with Company OverviewAutoNation, a provider of personalized transportation services, is driven by innovation and transformation. As one of America's most admired companies, AutoNation delivers a peerless Customer experience recognized by data-driven consumer insight leaders, Reputation and J.D. Power. Through its bold leadership and brand affinity, the AutoNation Brand is synonymous with "DRVPNK" and "What Drives You, Drives Us." AutoNation has a singular focus on personalized transportation services that are easy, transparent, and Customer-centric.BenefitsClick here to learn more about our Benefits.Join us as we pave the way to moving our company, our communities and our industry forward. Apply today at a location near you or wherever you dream the road will take you.AutoNation is an equal opportunity employer and a drug-free workplace.

StandardAero offers:Competitive wagesGenerous paid time offInsurance includes medical, dental and vison benefitsRetirement wages Clean, modern, air-conditioned facilitySafety focused cultureAdvanced opportunities Build an Aviation Career You're Proud OfYour work ties us all together, helping our teams' function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks.Quality InspectorAs an Aircraft Engine Quality Inspector, you'll provide quality assurance support for all company products and processes to ensure that the highest standards for quality are maintained. Monitors processes, develops improvements and interfaces with functional departments to achieve customer satisfaction and to resolve issues through cooperative methods.What you'll do:Reviews factors in light of quality of product and reliability of quality during production.Conducts internal audits on departments and business units to ensure compliance with company instructions and policies.Ensures compliance to the applicable quality procedures affecting the production process in the cell.Participates in continuous improvement of cell processes.Research, compiles and reviews company procedures.Collects and analyzes quality data for the purpose of identifying trends with respect to non-conformance documents.Reports necessary information and offers solutions to production, materials and the company as a whole, to correct specification or process problems that are occurring.Monitors warranty procedures including investigation, root-cause, corrective action and follow-up to ensure that continuous improvement is occurring.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Verifies the completion of the work instructions identified on the task control number (TCN) and the correct configuration and identification of the end product to ensure task compliance. Carries out special projects as assigned.What you'll need: Strong planning, organizational, analytical, leadership, interpersonal, decision making, oral and written communication skills.Thorough knowledge of company instructions, company processes, quality and original equipment manufacturer manuals.Knowledgeable in the assembly methods and techniques used.Proficient in the use of precision measuring instruments.Knowledgeable in the quality requirements relating to the production process.Thorough knowledge of Foreign Certification requirements and other regulatory bodies.Thorough knowledge of ISO 9000 quality system requirements.Thorough knowledge of AS9110, SABERThorough knowledge of Cost of Poor QualityThorough knowledge of Corrective Action Request Thorough knowledge of internal audit policies and procedures.Thorough knowledge of quality improvement tools and techniques.Working knowledge of Microsoft Office (Word, Excel, Access, PowerPoint, Outlook).Working knowledge of production management computer systems.College diploma in mechanical engineering technology; or equivalent.Experience as an inspector in an aerospace environment.Must be authorized to work in the US.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time - 10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doUnder direct supervision of the Area Resource Manager (Customer Service Dispatch Supervisor), receives and schedules customer calls for service. Manages schedule of assigned technicians and mechanics. Ensures schedule allows for timelycompletion of preventative maintenance and aligns with monthly forecasting goals. Debriefs activities of assigned technicians/mechanics daily, coordinating with technicians/mechanics to resolve concerns quickly. Partners effectively with the Service Team Manager to ensure technical service work is completed in a reasonable timeframe and to the customer’s expectations. Analyzes and assesses technical team performance and adjusts as needed to enhance customer satisfaction in a cost-effective manner. Assesses job completion and collaborates with Customer Billing Coordinators and Customer Support Coordinators to progress completed jobs through the appropriate businessprocess.How you will do itCandidate will work a 7:30 am to 4:30 pm shift which includes 1-hour lunch. This is not a remote position; you will be onsite.Receives customer requests for unscheduled or scheduled service.Coordinates labor scheduling to align technician to the appropriate customerand service need.Communicates the action plan and services to be provideddirectly to the customer.Ensures work has been performed to the customer’s expectations and performs follow-up with the customer, as needed.Answers any customer inquiries and resolves or escalates customer issues, as appropriate.Debrief activities daily.Ensures Technicians are provideddaily schedules. Maintains consistent communication with assigned Technicians. Follows up on activities to ensure completion in an established timeframe.Ensures that all customer account information requiredto support call management activities and scheduling of tasks are kept up to date in NxGen.Scheduled Service Visits – on timeParts ordering/PO creation supportStart-up supportCustomer PO confirmationWIP ManagementReconcile exceptions (SIR and AP)Attend weekly planning/scheduling meeting.Assistwith monitoring of time and expense reporting submissionReview and correct unassociated time for timesheets for technicians.Other duties and administrative activities as assigned.What we look forRequiredHigh school diploma or equivalent required.Must demonstratethe ability to perform work independently and demonstratesolid organizational and attention to detail skills.Must have strong interpersonal skills to effectively communicate with both internal and external clients. Must have the ability to simultaneously handle a large and diverse number of projects, tasks and issues with tact, cooperation, and persistence.Able to prioritize work activities based upon financial impactto desired business goals.Able to influence diverse teams to accomplishtasks/goals.PreferredTwo to five years of service industry experience and/or service scheduling.Associatedegree preferred.Experience and/or basic project accounting or costing principles is desired.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training.What's in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture: Our culture is what makes UniFirst an organization that stands out from the rest.Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you'll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED is preferred. Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age. Valid driver's license and a safe driving record are required. Knowledgeable in maintenance equipment. Minimum of 6 months' work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment test to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first.UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws UniFirst is an equal employment/affirmative action employer. If you need accommodation for any part of the application process because of a medical condition or disability, please send an e-mail to or call to let us know the nature of your request. UniFirst Recruiters and/or representatives will not ask job seekers to provide personal financial information when submitting a job application. Please be vigilant as such requests for information may be fraudulent.

MAINTENANCE TECHNICIAN - CORRUGATED INDUSTRY 1800 E Plano Pkwy, Plano, TX 75074, USAReq #9664 Wednesday, March 6, 2024 As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers large and small package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People • Customers • Trust Pay and BenefitsPay Range from $27.04 - $34.61 based on skills and experience.Excellent Benefits Package including Health, Dental, Vision, and 401K Plan.1.5 pay over 8 hours or over 40 hours.1.5 pay on holidays, plus additional overtime over 8 hours on holidays.Uniforms provided.Up to 100 paid training hours annually for technicians to advance through the progressive skill levels.Stipend for safety shoes and safety glasses.RESPONSIBILITIES:Perform a variety of maintenance tasks to diagnose, repair, rebuild, replace mechanical, electrical, PLC, hydraulic and pneumatic systems on all plant equipment and facilities.Use maintenance knowledge to increase productivity, decrease downtime and waste.Work with a sense of urgency to respond to machine downtime events.Will be required to complete in-house training programs to develop equipment specific maintenance skills.The position may also require attendance at external training that may require occasional overnight travel.Must be able to follow all safety and company policies, including lock-out tag-out procedures.BASIC QUALIFICATIONS:At least 2 years of experience successfully troubleshooting and repairing industrial manufacturing equipment in the corrugated packaging industry.Must have knowledge and experience with repairing and maintaining mechanical, electrical, hydraulic, pneumatic, PLC systems and industrial equipment.Be passionate about maintaining a safe and clean work environment.Ability to work any shift, overtime, and weekends as needed.Must have own basic tools (PCA will provide specialized tools).Must be authorized to work in the U.S.PREFERRED QUALIFICATIONS:Technical degree and/or 5 years of experience in successfully troubleshooting and repairing industrial machinery and equipment within the corrugated packaging industry.KNOWLEDGE, SKILLS & ABILITIES:Excellent communication skills.Basic computer skills.Ability to work in a fast-paced environment. All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories. Other details Pay TypeHourlyMin Hiring Rate$27.04Max Hiring Rate$34.61

Priv is the leading on-demand beauty and wellness service app that delivers professionals straight to our client’s door for hairstyling, makeup, massage, nail, facial, spray tan, ear piercing, and fitness services. We currently serve 30+ markets in the United States! We are seeking talented and professional Hair Stylists to join our community of freelance pros in your area. Be a part of our loyal team of professionals, committed to transforming the beauty and wellness industry by delivering clients a luxury experience anywhere, anytime. We work with YOUR availability; you never have to take an appointment that doesn't fit into your busy life. Earn additional income doing what you love and meeting new clients! Why Priv “I've been with Priv for 4 years and love the team, flexibility and company. Would never work anywhere else!” - Prv Professional Be an independent contractor and work when and where you wantHave the freedom to work for other apps or salonsPriv is a one-stop-shop to offer all of your services We offer competitive rates and compensation Attend professional development workshops to help you grow in the industry Build lasting relationships with clients and other beauty and wellness professionals Participate in industry level events, premiers, trade shows, and fashion shows Pay: $50 - $100 per hour https://gopriv.com/

Make every paint job a masterpiece. Be a wizard.$2,500.00 sign on bonus being offered for this position.As a Paint Tech with Dent Wizard, you'll have unlimited earning potential and the ability to control your day as you deliver fast, flawless paint jobs that dazzle. We're hiring right now for a Paint Technician in McKinney, TX.Utilizing specific surface preparation, the latest spray equipment and proven painting techniques, you will inspect, prepare, blend and finish vehicle surfaces. Working at locations that may include automotive dealerships, rental agencies and auto auctions, you'll do everything from simple touch-ups to repairing paint damage.The Dent Wizard DifferenceUnlimited, uncapped earning potential based on commission: the harder you work, the more you can makeExcellent benefits, including medical, dental, vision, 401(k), paid vacation and moreOutstanding perks, including mobile phone, company vehicle, gas card and moreWe will fully equip you with the most current tools and supplies Independence to manage your day; no micromanagementGreat work/life balance that puts you in charge of your scheduleOn-the-job training in our computerized color matching systems and painting techniques from experienced paintersCertifications and advanced training with organizations like PPG and BASFDefined career path with five levels from Senior Technician to World-Class Technician, each with bonuses, perks and recognitionWhat You Need to Succeed1-2 years of auto painting experienceVision abilities including close, distance and color vision, depth perception and ability to adjust focusGreat communication skills to interact with customers and build accountsManual dexterity for repetitive-motion tasksStrong work ethic, self-motivation and the ability to work independentlyToughness and grit to work outside in all kinds of weatherPhysical stamina to kneel, bend and squat, as well as lift up to 45 poundsValid driver's license and good driving record The compensation offered for this position will depend on qualifications, experience, and geographic location. This position is primarily paid on highly incentivized commission structure. The starting compensation is expected to be between $60,000 and $80,000 annually. We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution).About Dent WizardDent Wizard is the nation's undisputed leader in automotive reconditioning services and vehicle protection products - and our success is the result of the great people who serve our customers. We're stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve.

Essential Duties and Responsibilities: Implement and maintain parts inventory management trackingReceives shipments from vendors, checking vendor packing slips/invoices for accuracy and insuring quantities received are as stated; maintains appropriate records within CMMS systemDirectly issues parts received to open work orders or places parts in proper location within the parts roomEnters receipt and distribution of parts/supplies into computer to update automated inventory records Hippo and SAPUtilizes internet and other resources in order to locate and place orders for partsCoordinate transportation /vendor pickup to local machine shops, parts supply stores, etc. if necessary self-delivery/pick-upConducts periodic physical inventory to assure proper availability of required stock; replenishes stopcock as shipments arrive.File requisitions, work orders or requests for materials, tools or other sock itemsResponsible for carrying out work assignments in an efficient manner to maximize productivityResponse for following plant safety procedures, guidelines, and rules as job functions are performed and reporting any unsafe conditionMaintains a clean work areaPredictive maintenance management spare parts, usage, critical sparesData compilations- down time analysis, scrap, etc.Perform other duties and responsibilities as requested Education and/ or Experience: Knowledge and experience with SAP strongly desiredHS Diploma or equivalent required; College Degree a plusExcellent time management and organizational skillsStrong communication and interpersonal skillsBasic mathematical skills used to add, subtract, multiply, divide, use decimals & fractionsWorking knowledge of MS Office and excellent computer skillsWork independently on assigned tasks, as well as accept direction on given assignmentsWork well under pressureMust have valid driver’s licenseDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

About Hawx Hawx Pest Control is a technology-driven company that is revolutionizing the pest management industry. Hawx serves a crucial public health function by using state-of-the-art equipment and environmentally conscious products to protect the people and places our customers love. At Hawx we pride ourselves on our internal company culture. Our team members benefit from being part of a company that actively rewards employees for being team players while providing ample opportunity for personal and professional growth. We understand how important it is to recruit and reward people who are enthusiastic about developing their careers and opening new opportunities while delivering a best-in-class customer experience. Job Summary We are seeking to hire a talented Seasonal Service Professional who will inspect and perform pest control treatments for residential and commercial customers using high quality and environmentally responsible products.DETAILS $17 - $18Full-time positionWork travel required Responsibilities Perform efficient routes individually.Enter and exit structures, crawl spaces and climb on top of structures.Address and alleviate customer concerns and pest related issues by using integrated pest management strategiesMaintain and care for company equipment, vehicle and gas card and other job-related items.Complete all duties required by a pest/mosquito/termite service professional: customer consultation, inspection, eliminate/identify conducive conditions and proper treatments.Record work activities and complete all paperwork after finishing services.Exemplify safe performance of job duties and adherence to safety policies and procedures. Qualifications TRAITS Reliable: Establishes and upholds our company culture and values. Believes in the company mission and the Hawx culture of excellence. Shows up on time and gets the job done. Stays on top of tasks and manages time and responsibilities well. People Person: Keeps things positive and gets energy from people. Adaptable and flexible while working with different personality styles. Develops strong working relationships with frontline team members. Enjoys working cross-functionally with Sales teams and knows how to relate to and work with them. SKILLS Top Performance: Sets the bar for the team in service quality and route efficiency.Effective Communication: Works well with team members of any skill level to level up their performance and has the ability to onboard and train new hires.Technical Expertise: Has a solid understanding of the pest control field and the technical aspects of the job being performed by frontline employees. Field Leads must understand protocols, application techniques, products, equipment and other tools that are used on a day to day basis so they can train and coach to a high standard. EXPERIENCE & OTHER REQUIREMENTS Pest management experience, preferably in a residential market, with responsibilities related to coaching and developing frontline team members.Must have and maintain any required state licenses/certifications.Must be 21 years or older with a valid driver's license.Must pass required background check and drug screening.Hawx Services, LLC is an Equal Opportunity Employer committed to fostering an inclusive work environment with the most qualified employees. Both in our hiring process and in the experiences that our team members have as employees, Hawx is committed to diversity, equity, and inclusion. Accordingly, Hawx is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, sexual orientation, age, marital status, disability, gender identity, or veteran status.

Compensation Details:$40000 - $50000 per year plus Bonus Opportunity Job Description:About Legacy PlumbingLegacy Plumbing is an award-winning, founder-operated Plumbing business founded in 2006. Legacy exists to positively impact and transform the lives of our employees, customers, and community by Redefining What Service Is, Inspiring Each Other to be Our Best Selves, and Spreading Good by Doing Good. At Legacy Plumbing, our employees don’t just “punch a clock.” They are part of something much bigger, and we all work together to fulfill our purpose of positively transforming each other, our customers, and our community. If you want a rewarding and meaningful career with top professionals, consider joining our team. Legacy Plumbing hires only the most seasoned professionals to represent our company. You don’t just acquire a new job when you join the Legacy Team. You become part of a family. We believe that personal relationships developed over time make the foundation of our company’s success. In 2022, Legacy Plumbing joined the Ace Hardware family to catapult our vision for the future to the next level. We're excited to continue delivering exceptional plumbing services and quality alongside the resources of the trusted Helpful brand. Together with Ace, we're looking forward to growing and supporting the local community for years to come.As A Plumbing Apprentice on our team you will..Support a team of technicians in the fieldLots of hard, manual labor (digging, climbing, carrying heavy items, cleaning, etc.)Support the Warehouse CoordinatorLearn how to put customers at ease while educating them on plumbing issues and fixing their problems.Wow our customers and build relationships with them.Communicate positively & effectively with teammates in the field and in the office.Be ready and willing to help out wherever you are needed.EXPERIENCE YOU WILL NEED..Mechanical aptitudeHustleProblem-solving skillsBe teachableYOU'RE THE HIGH-ACHIEVER WE'RE LOOKING FOR IF ....You have high standards for your work. Excellence matters to you.You have Integrity in all aspects of your professional and personal lifeYou have a growth-mindset and want to get better every day.You have grit and thrive under pressure.You love to hustle.You are a true team player with a positive attitude at all timesYou are dependable and consistent in all areasCOMPENSATION: Better than competitive with a profit pool and lots of friendly competitions for small bonuses throughout the year. Benefits include health insurance (medical, dental, vision), short-term disability, long-term disability, health concierge, life insurance, and 401(k).Benefits:401(k)Dental insuranceDisability insuranceHealth insuranceLife insurancePaid time offRetirement planVision insuranceEqual Opportunity EmployerAce Hardware Corporation and its subsidiaries are committed to a policy of promoting equal employment opportunities. The company recognizes the importance of diversity and leveraging the skills and talents of all people to the mutual advantage of each individual and the organization. The company is committed to the prevention of employment discrimination related to race, religion, color, sex (including sexual harassment), gender identity, national origin, age, marital status, disability and military or veteran status, sexual orientation or any other action covered by federal or applicable state/local laws.DisclaimerThe pay range for this position starts as listed in the job posting, but could be higher based on education and experience. Please note, compensation decisions are dependent on the facts and circumstances of each opening. We take into consideration the minimum requirements outlined in the job description, such as an individual’s education, training and experience, the position’s work location, required travel (if any), and external market conditions when determining the final salary for potential new hires. Be aware that salary estimates published via alternate online job boards may not be a true representation of the actual pay range offered for this position. Please refer to the Ace position description for the accurate starting pay range information and feel free to discuss this with a Talent Acquisition professional if you are chosen to move forward with an interview. This written “Position Description” is not intended to cover all aspects of the position listed. It is meant to cover the basic/general essential job functions of a particular position. Ace Hardware Corporation reserves the right to change job duties, including essential job functions, according to business necessity.

Location: Dallas, TXWhy You Should Join the Service Experts Team Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT!Service Experts Company Perks and Benefits for YOUTop Pay for Top Performers, including incentive and bonus opportunities, depending on the positionOur Top Plumbers earn over $80,000 annuallyGenerous PTO provided:20 paid days off within your first year of employment (vacation & national holidays)25 paid days off after your 2nd year of employmentNo layoffs during “Slow Season” – due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ample advancement and career-growth opportunities available across the U.S.Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programsWe provided wellness program options for free employee medicalCompany-provided smart phone, tablet, uniform plan, and tool replacement programWe’ll make you better at what you do with our internal Training AcademyBest-in-class 401(k) Retirement Savings Plan with attractive company matching contributionsCompany-paid employee Life Insurance with options for YOU and your Family!Short-term and Long-term disability insurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Job Summary: We are looking for a skilled and experienced Plumber Level I to join our Service Experts HVAC and Plumbing team. In this role, you will be responsible for performing a wide range of plumbing duties, including installations, repairs, maintenance, and troubleshooting of plumbing systems. The ideal candidate should have in-depth knowledge of plumbing codes and regulations, excellent problem-solving abilities, and strong leadership skills.Responsibilities:Install, repair, and maintain plumbing systems, including pipes, fixtures, drains, and water heaters.Conduct inspections of plumbing systems to identify and diagnose issues or defects.Interpret blueprints and technical drawings to plan plumbing system layouts and installations.Collaborate with clients, contractors, and other team members to discuss project requirements and timelines.Estimate materials, equipment, and labor costs for plumbing projects.Carry out installations and repairs of plumbing fixtures, such as sinks, toilets, showers, and water heaters.Cut, thread, and bend pipes using appropriate tools and techniques.Clean up job sites and ensure proper disposal of waste materials.Weld, solder, or join pipes using approved methods.Test plumbing systems for leaks and ensure proper functioning.Troubleshoot plumbing problems and provide effective solutions.Adhere to plumbing codes, regulations, and safety standards.Mentor and provide guidance to junior plumbers and helpers.Keep accurate records of work performed and materials used.Coordinate with suppliers to procure plumbing materials and equipment.Health & Safety Roles & Responsibilities:Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediatelyReports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediatelyCorrects substandard acts or conditions within area of controlUses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s)Never removes or renders ineffective any safety guards, devices, or clothing prescribed to be in place or wornComplies with the general rules as prescribed by company program(s) procedure(s)Operates devises or equipment as prescribed by company program(s) or procedure(s)Participates in any safety initiatives, teams, or committeesReports all injuries or incidents as prescribed by company program(s) or procedure(s) immediatelyProvides input on developing safety initiatives and plans to eliminate exposures that could cause accidentsRequirements:High school diploma or equivalent. Completion of a plumbing apprenticeship program is preferred.Proven experience as a Plumber Helper or Apprentice or similar role.In-depth knowledge of plumbing codes, regulations, and best practices.Proficiency in interpreting blueprints and technical drawings.Strong understanding of plumbing systems, materials, and tools.Excellent problem-solving and troubleshooting abilities.Effective communication and leadership skills.Ability to work independently and as part of a team.Strong attention to detail and time management skills.Physical stamina and the ability to lift heavy objects.Valid plumbing license/certification is preferred.Valid driver's license.Working Conditions:This position involves physical labor and may require working in confined spaces or at heights.Work may be performed indoors or outdoors, depending on the project.Exposure to various weather conditions, including heat, cold, and humidity.May be required to work in hazardous environments or with potentially dangerous materials.Availability to work evenings, weekends, and on-call shifts as needed.

Why You Should Join the Service Experts Team Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth.Join us and become an EXPERT!Service Experts Company Perks and Benefits for YOUGenerous PTO provided:20 paid days off within your first year of employment (vacation & national holidays)25 paid days off after your 2nd year of employmentNo layoffs during “Slow Season” – due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ample advancement and career-growth opportunities available across the U.S.Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programsWe provided wellness program options for free employee medicalCompany-provided smart phone, tablet, uniform plan, and tool replacement programWe’ll make you better at what you do with our internal Training AcademyBest-in-class 401(k) Retirement Savings Plan with attractive company matching contributionsCompany-paid employee Life Insurance with options for YOU and your Family!Short-term and Long-term disability insurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Key Responsibilities:Works under minimal supervision to perform residential and/or light commercial service and maintenance calls Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks Completes routine maintenance and equipment cleaning as needed or required Responsible for delivery and removal of parts and equipment needed to complete service work Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer. Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit. Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for Represents the company professionally, honestly, and ethically in all business matters and activities Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed Performs similar/other duties as needed or assigned Regular, reliable attendanceHealth & Safety Roles and ResponsibilitiesReports any unsafe acts, conditions and hazards to direct supervisor/manager immediatelyReports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediatelyCorrects substandard acts or conditions within area of controlUses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s)Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or wornComplies with the general rules as prescribed by company program(s) procedure(s)Operates devises or equipment as prescribed by company program(s) or procedure(s)Participates in any safety initiatives, teams, or committeesReports all injuries or incidents as prescribed by company program(s) or procedure(s) immediatelyProvides input on developing safety initiatives and plans to eliminate exposures that could cause accidentsDoes not perform act that may endanger the safety or well-being of othersDoes not engage in any pranks, contests, or rough boisterous behaviorWorks in compliance with applicable legislative requirementQualifications:High school diploma or GED with additional training and 2 to 5 years’ experience in HVAC with technical training certification required Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area EPA and safety certifications required Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories Proficient mechanical aptitude and the ability to operate all necessary tools and equipment Proficient and able to operate all necessary tools and equipment to perform various service projects Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision Proficient and able to install a basic duct fitting Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns Effective and efficient time-management and organizational skills Valid driver’s license with acceptable driving record Available to work flexible hours and on-call shifts as needed Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl. Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception Ability to lift up to 75 pounds and ability to lift and carry items weighing up to 50 pounds

Why You Should Join the Service Experts Team Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth.Join us and become an EXPERT!Service Experts Company Perks and Benefits for YOUOur Service Technicians can earn up to $130,000 AnnuallyGenerous PTO provided:20 paid days off within your first year of employment (vacation & national holidays)25 paid days off after your 2nd year of employmentNo layoffs during “Slow Season” – due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ample advancement and career-growth opportunities available across the U.S.Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programsWe provided wellness program options for free employee medicalCompany-provided smart phone, tablet, uniform plan, and tool replacement programWe’ll make you better at what you do with our internal Training AcademyBest-in-class 401(k) Retirement Savings Plan with attractive company matching contributionsCompany-paid employee Life Insurance with options for YOU and your Family!Short-term and Long-term disability insurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Key Responsibilities:Works under minimal supervision to perform residential and/or light commercial service and maintenance calls Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks Completes routine maintenance and equipment cleaning as needed or required Responsible for delivery and removal of parts and equipment needed to complete service work Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer. Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit. Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for Represents the company professionally, honestly, and ethically in all business matters and activities Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed Performs similar/other duties as needed or assigned Regular, reliable attendanceHealth & Safety Roles and ResponsibilitiesReports any unsafe acts, conditions and hazards to direct supervisor/manager immediatelyReports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediatelyCorrects substandard acts or conditions within area of controlUses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s)Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or wornComplies with the general rules as prescribed by company program(s) procedure(s)Operates devises or equipment as prescribed by company program(s) or procedure(s)Participates in any safety initiatives, teams, or committeesReports all injuries or incidents as prescribed by company program(s) or procedure(s) immediatelyProvides input on developing safety initiatives and plans to eliminate exposures that could cause accidentsDoes not perform act that may endanger the safety or well-being of othersDoes not engage in any pranks, contests, or rough boisterous behaviorWorks in compliance with applicable legislative requirementQualifications:High school diploma or GED with additional training and 2 to 5 years’ experience in HVAC with technical training certification required Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area EPA and safety certifications required Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories Proficient mechanical aptitude and the ability to operate all necessary tools and equipment Proficient and able to operate all necessary tools and equipment to perform various service projects Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision Proficient and able to install a basic duct fitting Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns Effective and efficient time-management and organizational skills Valid driver’s license with acceptable driving record Available to work flexible hours and on-call shifts as needed Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl. Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception Ability to lift up to 75 pounds and ability to lift and carry items weighing up to 50 pounds

BlueTriton is a leading provider of spring and purified water products - the name behind your favorite bottled water brands. We are proud to offer an extensive portfolio of highly recognizable, responsibly sourced, and sustainably packaged spring water in addition to other quality products and services. Get ready to quench your thirst with exciting possibilities when you join BlueTriton for a fiercely good career doing work that matters.Water might seem simple enough, but there is a lot going on beneath the surface. Working in a factory or warehouse requires rolling up your sleeves to get things done and the tenacity to go the extra mile again and again. We believe the rewards are worth the effort: a business you help shape, a supportive team you learn from, and the chance to have a sustainable impact in which you can truly be proud.Job DescriptionWe are currently seeking a Maintenance Planner to report to the Factory Technical Manager. This is a factory-based position with primary responsibilities to include leading the Maintenance Planning activities to plan, coordinate and execute all necessary resources needed to support the asset reliability maintenance program. This is an exempt position reporting directly to the Maintenance Manager.Responsibilities:• Responsible for implementation, execution and continuous improvement of maintenance standards for the factory to ensure machine reliability and adherence to all compliance regulations both internal and external in the states and countries of operation. • Support Factory Technical and Operations Teams to optimize and update the Reliability Centered Maintenance Plans for all machine centers including, condition and time-based maintenance, to ensure machine reliability targets are met utilizing SAP Computerized Maintenance Management System (CMMS). • Lead, teach and coach the implementation and continuous improvement of BlueTriton Guiding Principles for Preventive Maintenance to support factory in achieving maintenance plan execution. • Provide planning and execution support as it directly relates to asset reliability for maintenance or project related downtime events >8 hours, breakdown analysis for all breakdowns >24hours, lubrication program management, machine or component obsolescence, asset register for all equipment. • Lead the Plan Do Check Act (PDCA) meetings at the factory. Request inputs from factory technical teams to ensure the planning of work orders is adequate. Implement the standard BTB agenda and closely monitor effectiveness. • Factory SAP CMMS super user responsible for understanding program management and how to update weekly and monthly reporting of all critical maintenance KPI’s to include but not limited to; PM % Completion, WO Backlog, ZBB Manage to the month, Statutory and Critical Maintenance activities. • Lead the Annual Zero Based Maintenance budgeting process for the factory to include the routine and non-routine factory maintenance capex submission process. Ensure proper roles and responsibilities are understood for analysis, justification, funds request, factory implementation plan, reporting and tracking of reliability centered maintenance plans for all manufacturing equipment. • Support the factory Technical Competency building program by maintaining the data base of training material provided by the Asset Reliability Team. This will include but is not limited to SOP's, VWI's, OPL's, Instructional Videos etc. for all Maintenance, Safety and Environmental related activities by ensuring internal and external compliance. • Responsible to support Factory, Innovation and Engineering escalations both proactively and reactively to ensure Development of Self and Associates through Coaching, Training and Feedback. QualificationsKey Qualifications: • High-School Diploma or GED – Preferred Certification in Industrial Maintenance or Project Management. • Minimum of 5 Years hands-on in the field experience in maintenance planning or project management. • Ability to read and interpret complex technical parts manuals, catalogues, SOP’s. • Experience across several business functions with fully developed verbal and written communication skills. • Maintenance and technical lead experience within highspeed packaging, ideally beverage, food or other clean manufacturing. • Proven track record in delivering results through others by working with cross-functional teams. • Awareness of Continuous Improvement methodologies. (LEAN, DMAIC, 5why, BDA, TPM). • Advanced hands-on working knowledge of AMM / CMMS systems (SAP Required). • Must be able to lead and facilitate meetings with large groups both in person and virtually. • Advanced use of Microsoft Excel and Office Suite (Excel, Word, PowerPoint, Outlook, TEAMS). • Must be able to complete complex data analysis and communicate in Lehman’s terms. • Self-motivated and able to manage time independently. BlueTriton Brands offers an extensive portfolio of highly recognizable, responsibly sourced and packaged spring water, purified water and water beverage brands that include Poland Spring®, Deer Park®, Ozarka®, Ice Mountain®, Zephyrhills®, Arrowhead®, Origin, Saratoga®, AC+ION®, Pure Life®, B’EAU®, Splash Blast® and Splash Fizz®. BlueTriton Brands also owns and operates ReadyRefresh®, a customizable water and beverage delivery service that has been certified as a CarbonNeutral® business. Based in Stamford, Connecticut, BlueTriton Brands and its affiliates in the United States and Canada employ over 7,000 employees. BlueTriton Brands manages resources for long-term sustainability and helps to safeguard more than 20,000 acres of watershed land. The Company has 28 production facilities across the United States, 13 of which are Alliance for Water Stewardship ("AWS") certified across 12 sites, with eight of the certified facilities being AWS Platinum, the highest-level certification.BlueTriton Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. BlueTriton Brands is committed to providing reasonable accommodation for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please contact us at

Maintenance Ride Mechanic JOB SUMMARY: Repair, operate, rehab, and provide general maintenance to park rides and equipment. SPECIFIC DUTIES AND RESPONSIBILITIES: Perform daily mechanical inspections and repairs to ride structures and unitsMaintain and trouble shoot amusement rides and park equipmentMaintain records for maintenance and inspections performedWork with other departments as needed to complete dutiesMaintain compliance with all safety rules, procedures, and regulationsMaintain positive interaction with other employees and guestsOther tasks and duties as assigned SKILLS AND QUALIFICATIONS: 1-2 years of maintenance experience involving industrial or heavy equipment maintenance and mechanical repair proceduresShould have a varied skill set including knowledge of general maintenance, welding, and machine shop repairMust be able to work varied shifts, days, nights, and weekends including extended hours when required and willing to work under various weather conditionsMust be physically fit and able to climb stairs and ride units with heights of 50 or more feetMust be able to lift up to 50 pounds and stand for extended periods of timeMust be able to stoop, bend, and lift regularlyMust be self-motivated and able to perform tasks with minimal supervisionMust be at least 18 years of age and possess a high school diploma or equivalentAble to provide own basic hand toolsMust possess a valid driver’s license, a good driving record, and successfully complete all authorized employment screenings and criminal background checks If you are able to answer "YES" to all of the following questions, please continue the application process by clicking "Apply" Can you provide legal documentation establishing your identity and eligibility to be legally employed in the United States Are you able to perform the essential functions of the job for which you are applying with or without reasonable accommodation Within the last 90 days, can you state that you have not used illegal or social drugs (excluding marijuana), such as MDMA (Molly), cocaine and crystal methamphetamine I am willing to agree that future text messages relating to Six Flags, Inc., including company news, job posting application status updates, and other information, may be sent on behalf of Six Flags, Inc. to the cell phone number I provide.

Overview: Driver's Edge Auto Repair has delivered fast and easy service for over 10 years. We proudly serve the greater Dallas & Fort Worth areas and provide great service on an array of automotive services, optimizing performance utilizing proven processes inside of a systematic approach to automotive repair.The General Service Technician will perform non-technical service repairs such as oil changes, tire and wheel related services, alignments, flushes, and more. While working alongside ASE Certified Automotive Technicians, you will get the training necessary to get to the next level in your career. If you are interested in becoming a certified ASE Automotive Technician, this is the opportunity for you. This could be the beginning of your successful career. Starting at: $13.00/Hr. to $16.00/Hr. Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities : Performs tire mounting/dismounting, wheel balance and tire rotation. Performs oil changes and other basic services Utilizes the company's Multi-point Inspection and/or Repair Order to properly document the vehicle condition Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance Requires driving vehicles in a safe and courteous manner obeying all traffic laws Includes transporting customers, picking up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle Conducts State Safety and Emission Inspections (in applicable locations) on vehicles in an ethical manner following all company and state guidelines Follows all safety procedures and reports any concerns to direct supervisor Ability to work flexible schedules, including weekends as needed. Other duties as assigned by direct supervisor Adheres to Sun Auto's core values, and all company policies and procedures as outlined in the Sun Auto Tire & Service Employee Handbook Qualifications : Possesses a general understanding of under the hood, mechanical and under carriage assemblies is preferred Valid Driver's license in the work State Ability to obtain a State Inspector License is preferred High School Diploma or equivalent preferred Working Conditions and Physical Demands : The General Service Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions .The General Service Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently. Communicate with customers and shop personnel Vision sufficient to detect color, depth, and re-focus Previous automotive experience preferred, but we will consider energetic and hard-working individuals with a passion for cars. Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there is ALWAYS something to do. Must possess a valid driver's license and be able to pass a pre-employment drug test, MVR, and criminal background check.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#bayard

The Master Electrician will be responsible for all equipment, services, building and property associated with the physical plant. Additional Information: Night Shift: 12 hours rotating schedule Here, we believe there’s not one path to success, we believe in careers that grow with you. Whoever you are or wherever you come from in the world, there’s a place for you at Sherwin-Williams. We provide you with the opportunity to explore your curiosity and drive us forward. Sherwin-Williams values the unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans. We’ll give you the space to share your strengths and we want you show us what you can do. You can innovate, grow and discover in a place where you can thrive and Let Your Colors Show! At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commuteit matters to us. A general description of benefits offered can be found at http://www.myswbenefits.com/. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Sherwin-Williams is proud to be an Equal Employment Opportunity/Affirmative Action employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Independently trouble shoot, diagnose, and repair complex control systems as the relate to high-speed filling/packaging environment.Ensure all work is compliant with NEC, ANSI, NFPA and any other applicable standards and regulationsRead and interpret ladder logic diagrams.Read blueprints and wiring diagrams and make own layouts as required.Independently trouble shoot, diagnose, repair, and install a range of equipment from low voltage to 480 volts/277-volt circuits, motor controls, control logic, and power wiring.Make new major installations and repairs as well as perform general maintenance and repairs.Use necessary tools and instruments to independently perform tasks.Obtaining parts from storeroom and assign parts to work orders using the computerized maintenance management system.Clean and maintain electrical enclosers and components as necessary.Perform routine or related duties assigned by Plant Engineer, Maintenance Manager, or Maintenance Supervisor.Must know and follow safety instructions and maintain housekeeping procedures.Notify supervisor, emergency coordinator and other plant authorities as necessary in emergency situations.Responsible for making and sustaining goals for Rx.Other duties as assigned.Minimum Requirements Must be at least 18 years of age Must be legally authorized to work in the country for which you are applying for employment without now or in the future needing sponsorship for employment visa statusMust have Master Electrician license, Technical School Diploma or five (5) years of experience in an industrial environmentMust have one (1) year of maintenance experience applying electrical, hydraulic, and pneumatic conceptsMust have five (5) years experience troubleshooting complex circuitsMust have three (3) years of electrical and/or instrumentation experience within a manufacturing or maintenance environment Preferred Qualifications Have at least a associate degree or higherHave at least seven (7) years of experience as an electrical instrumentation, control system maintenance, installation and repair

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily . WHAT WE OFFER We are a large company serving many unique customers - because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering: Ongoing Education & Training Exposure to a Large Variety of Projects Industry-leading Benefit Packages Advanced support and tools designed to improve your workflow Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time. Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers' expectations Provides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner. Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base. Test malfunctioning systems and components using electrical and/or mechanical skills. Maintain legible corporate and personal records of work history. Provides department support by processing job tickets, and work orders to the necessary department promptly. Provide support by picking up, delivering, and installing cases. Perform work on minor construction and remodeling projects including startups of new installations. Drives company vehicle in a safe manner. Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED. EPA certification. Certification from an accredited vocational-technical or trade school is a plus! Minimum 5+ years of commercial refrigeration experience required. Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus. Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. Must have a good driving record and be able to work independently. Emergency on-call availability is a basic requirement. Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

The pay range per hour is $34.85 - $40.25Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Engineering & Facilities - Maintenance Technician 2 (MT2)About job:up to $2.50 shift differential or key premium based on KeyTuition Reimbursement ProgramBenefits eligible within two weeks of employmentCurrently hiring for below shift:A1 Key - Saturday, Sunday, Monday from 6:00am to 6:00pmAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and suppliesCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)Target will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Target store or Supply Chain Facility or reach out to Guest Services at 1-800-440-0680 for additional information.

StandardAero is one of the largest independent maintenance, repair, and overhaul providers in the aerospace industry. At our plants, our units engage in a variety of work scopes involving trouble-shooting, problem solving, and working together to embody our #1 priority, which is ensuring the safety of our people and our product.At StandardAero, we offer:A clean, safe, and temperature-controlled work environment.Competitive compensation structures and a total rewards package.An opportunity to work with a variety of aircraft engines.A variety of shifts and hours.Opportunities for horizontal and vertical movement within the organization.ENGINE MECHANIC (CFM56)Build an Aviation Career You're Proud OfYour work ties us all together, helping our teams function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks.As an Engine Mechanic (CFM56), you'll maintain, repair, and overhaul aircraft engines, modules, components and accessories to assure compliance with established company standards, contractual obligations and airworthiness regulatory requirements. Performs technical troubleshooting using mechanical ability and extensive product knowledge. Cross trains in other complementary skills as needed to support production requirements.What you'll do:CFM56 Engine experience is preferred.Perform dismantling and assembly of complete engines, modules, components and assemblies in accordance with all customer, regulatory, and company requirements using hand or power tools.Troubleshoot to identify problems and adjusts and repairs products according to specifications and established procedures.Interpret technical specifications, directives and relevant publications to identify product discrepancies and deficiencies.Interpret technical standards, drawings, specifications, and other relevant documentation using mechanical precision measuring tools and instruments as required; verifies the conformance of parts to manuals and blueprints with respect to measurements.Use machines, tools, jigs, fixtures, gauges, plant equipment and consumables necessary to carry out the required tasks.Check for serviceability, conformity documentation completeness and compatibility to applicable standards.Replace defective parts and reassembles units ensuring conformance with applicable regulations and manufacturer's specifications.Maintain detailed repair and certification records and reports of work performed.Participate in continuous improvement of cell processes.Cross train in other complementary skills and seeks endorsements for those skills as needed to support production requirements.Move between production assignments that utilize multiple skills endorsements as needed to support production requirements.Participate in cross training of other technicians as needed to support production requirements.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carry out other duties as assigned.Position Requirements: Ability to read, understand and interpret schematics, graphs, blueprints, and other technical information.Ability to lift up to 50 pounds (unassisted) for approximately 25% of the average work day.Regularly required to stand for prolonged periods.High degree of mechanical aptitude, accuracy and precision.Knowledgeable and proficient in the proper use of precision measuring equipment.Working knowledge of production management computer systems and other related internal control systems.Ability to follow and understand related company instructions, company processes, overhaul manuals, and original equipment manufacturer's manuals.Specialized training in engineering or aircraft maintenance (AME, A&P, AMT); or equivalent preferred.Experience as an aircraft mechanic in an aerospace environment.Ability to workday shift or second shift as required.CFM56 engine MRO experience preferred.Major Module removal and installation (Engine to Modules)Module Disassembly and Assembly (Modules to Submodules)Submodule Disassembly and Assembly (Submodules to Piece Parts) Must be authorized to work in the US.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offerCompetitive payPaid vacation, holidays, and sick timeComprehensive benefits package, including 401K, medical, dental, and vision care - available from day oneExtensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCompany vehicle, tools, and equipment provided to complete all jobsScheduling and management supportJCI Employee discount programs (The Loop by Perk Spot)What you will doService and troubleshoot wet/dry/ pre-action systems, fire pumps-based fire sprinkler systems, and backflows, including repair and internal inspections of systems.Follow verbal and written instructions, read and understand complex construction blueprints, diagrams, and specifications used in installation activities.Carry/move equipment and tools weighing up to 60 pounds. Perform work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet or more.Maintain a clean and safe work area. Pick up and properly dispose of all trash associated with Johnson Controls Fire Protection work. Wear appropriate safety equipment as required including bump cap/hard hat, safety glasses, cut-resistant gloves, face masks and safety-toed boots.Make sure to properly secure all Johnson Controls Fire Protection tools and equipment at the end of each work period so as to prevent damage or loss.Have computer/phone skills - Word, Excel, Outlook and IPhone apps and functionsComplete and submit time reports and other documents as required.Bring to the immediate attention of the dispatcher/supervisor of all changes, discrepancies and coordination problems that impair activities or schedules.Working alternate shifts or weekends to meet customer service on call requirements is required.Perform other duties as directed.What we look forRequiredHigh School Diploma, or equivalentWorking knowledge of wet, dry, and pre-action sprinkler systems, and fire pump systems a mustMust have a clean driving recordFollow verbal and written instructions3-5 years of experience in the industryPreferredSprinkler and Backflow license is plus or must be obtainedNICET is a plusJCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide.#LI-OnsiteJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Duties/Responsibilities Oversees, plans and issues work orders to appropriate shift team members for the implementation of equipment modifications as well as preventative and any corrective maintenance.Serves as back-up to Maintenance ManagerCoordinates repairs and maintenance activities with the production and scheduling departments as necessary.Active on the floor including providing any “hands-on” trouble shooting and maintenance of production equipment.Enforces all plant rules, monitors attendance, and provides corrective action (discipline) as necessary.Generates maintenance logs and any documents related to operating metrics such as OEE.Conducts safety inspections of work areas, examines tools/equipment, facilitates safety training to prevent, identify and correct unsafe conditions or violation of safety procedures and rules.Prepares purchase requisitions to request any materials and supplies such as tools, equipment, and replacement parts. May maintain spare parts inventory dependent on location.Interface with vendors and suppliers as necessary to discuss products used in repair work and/or projects that need to be completed.Participates in Lean Manufacturing practices such as Six Sigma, 5S, FMEA, 8D Problem Analysis.Review location’s Key Performance Indicators KPIs (Daily, Weekly and Monthly) to make recommendations for improving plant operations, OEE (Overall Equipment Effectiveness) and maintenance problem resolution.Plans and coordinates the installation and removal of plant equipment.Ensures Maintenance employees are properly trained in all aspects of their jobs to include safety, quality, and production. Recommends and coordinates any safety and technical training.Fosters a positive working environment and drives Maintenance team to meet set productivity targets and performance standards.Performs other duties as assigned. Requirements Plastic Injection Molding experienceAssociates Degree and/or technical school certificationFive years of supervisory experience in a manufacturing operationStrong organizational and planning skillsElectrical trouble shooting and repairExceptional written/verbal communication skills and ability to be a team playerExcellent analytical thinking and innovative problem-solving skillsMulti-task, prioritize in a fast-paced environmentPrevious experience working in a Lean environmentMicrosoft Office and SAP ProficiencyDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

About Hawx Hawx Pest Control is a technology-driven company that is revolutionizing the pest management industry. Hawx serves a crucial public health function by using state-of-the-art equipment and environmentally conscious products to protect the people and places our customers love. At Hawx we pride ourselves on our internal company culture. Our team members benefit from being part of a company that actively rewards employees for being team players while providing ample opportunity for personal and professional growth. We understand how important it is to recruit and reward people who are enthusiastic about developing their careers and opening new opportunities while delivering a best-in-class customer experience. Job Summary We are seeking to hire a talented Seasonal Service Professional who will inspect and perform pest control treatments for residential and commercial customers using high quality and environmentally responsible products.DETAILS $17 - $18Full-time positionWork travel required Responsibilities Perform efficient routes individually.Enter and exit structures, crawl spaces and climb on top of structures.Address and alleviate customer concerns and pest related issues by using integrated pest management strategiesMaintain and care for company equipment, vehicle and gas card and other job-related items.Complete all duties required by a pest/mosquito/termite service professional: customer consultation, inspection, eliminate/identify conducive conditions and proper treatments.Record work activities and complete all paperwork after finishing services.Exemplify safe performance of job duties and adherence to safety policies and procedures. Qualifications TRAITS Reliable: Establishes and upholds our company culture and values. Believes in the company mission and the Hawx culture of excellence. Shows up on time and gets the job done. Stays on top of tasks and manages time and responsibilities well. People Person: Keeps things positive and gets energy from people. Adaptable and flexible while working with different personality styles. Develops strong working relationships with frontline team members. Enjoys working cross-functionally with Sales teams and knows how to relate to and work with them. SKILLS Top Performance: Sets the bar for the team in service quality and route efficiency.Effective Communication: Works well with team members of any skill level to level up their performance and has the ability to onboard and train new hires.Technical Expertise: Has a solid understanding of the pest control field and the technical aspects of the job being performed by frontline employees. Field Leads must understand protocols, application techniques, products, equipment and other tools that are used on a day to day basis so they can train and coach to a high standard. EXPERIENCE & OTHER REQUIREMENTS Pest management experience, preferably in a residential market, with responsibilities related to coaching and developing frontline team members.Must have and maintain any required state licenses/certifications.Must be 21 years or older with a valid driver's license.Must pass required background check and drug screening.Hawx Services, LLC is an Equal Opportunity Employer committed to fostering an inclusive work environment with the most qualified employees. Both in our hiring process and in the experiences that our team members have as employees, Hawx is committed to diversity, equity, and inclusion. Accordingly, Hawx is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, sexual orientation, age, marital status, disability, gender identity, or veteran status.

OverviewResidential Sales ConsultantReports To: Sales Manager or General ManagerStatus: Full-time, Regular positionCategory: SalesLocation Name: Levy and SonsLocation Address:11024 Indian Trail Dallas TX­­­­­­­­­­­­Join the team of experts and realize your true potential!Why You Should Join the Service Experts Team:Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us, and become an EXPERT!Position Summary:The Residential Sales Consultant is an outside sales position responsible for developing and closing residential sales and services opportunities through customer education and presentations, using traditional lead-generation techniques as well as internal, lead pipelines.Key ResponsibilitiesPresent comfort options of residential HVAC and water heater products and services to new and established customers.Bolster the customer experience through a consultative sales approach focused on customer retention and satisfaction.Create relationships with prospective customer and referral as well initiating calls to generate sales.Work collaboratively with technical team members, onsite, to promote and ensure a 100% customer satisfaction experience.Remain up to date on the latest industry trends, service methods, systems and technology available within the market and the business.Desired Skills and QualificationsOur Residential Sales Consultant (RSC) are highly ambitious, results-oriented, and self-motivated individuals. Skilled in providing innovative, customer-related recommendations, developing effective proposals, handling negotiating and closing sales. To accomplish this, a successful RSC must possess:At least a High school degree or GED. A Bachelor’s degree or related professional sales certifications preferred.Prior sales experience, with a preference for experience with direct selling to consumersStrong selling and business-development skills.A demonstrated ability to effectively communication concepts to a variety of audiences.Demonstrated commitment to the delivery of high-quality, customer-focused service.Excellent interpersonal skills with a demonstrated ability to understand customer concerns and translate that into business solutions the business can offer. . .Valid driver’s license with acceptable driving record.Ability to consistently demonstrate a positive attendance record.Available to work flexible hours and on-call shifts as needed.Ability to meet physical demands - climb ladders and/or attic stairs, to maneuver in attics, basements, and crawl spaces to access HVAC units, in order to assess customer requirements and take measurements.Service Experts Company Perks and Benefits for YOUTop Pay forTop Performers, including incentive and bonus opportunitiesOur Average Sales Professionals earn an average of $90,000-$120,000 annuallyTOP performers WILL earn moreGenerous PTO provided19 paid days off within your first year of employment (vacation, personal holidays, & national holidays)24 paid days off after your 2nd year of employmentNo layoffs during “Slow Season”– due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ampleadvancementandcareer-growth opportunitiesavailable across the U.S.Hold on to more of your paycheck with Company-sponsoredMedical, Dental,andVision Insurance programsWe providewellness program options forfree employee medical insuranceCompany-provided smartphone,tablet,uniform plan, andtool replacement programWe’ll make you better at what you do with our internalTraining AcademyBest-in-class401(k) Retirement SavingsPlan withattractivecompany matchingcontributionsCompany-paid employee LifeInsurance withoptions for YOU and your Family!Short-term andLong-term disabilityinsurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Service Experts Heating & Air Conditioningis an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.The job description is not intended to be a complete list of all responsibilities, duties or skills required for the job and is subject to review and change at any time, with or without notice, in accordance with the needs of Service Experts.Service Experts is committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request an accommodation, please email

Why You Should Join the Service Experts Team Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth.Join us and become an EXPERT!Service Experts Company Perks and Benefits for YOUTop PayforTop Performers, including incentive and bonus opportunities, depending on the positionUp to $130,000 on average First Year Total Compensation” Total Compensation is Hourly plus Spiffs/Commissions***Depending on Center this could be moreGenerous PTO provided:20 paid days off within your first year of employment (vacation & national holidays)25 paid days off after your 2nd year of employmentNo layoffs during “Slow Season” – due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ample advancement and career-growth opportunities available across the U.S.Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programsWe provided wellness program options for free employee medicalCompany-provided smart phone, tablet, uniform plan, and tool replacement programWe’ll make you better at what you do with our internal Training AcademyBest-in-class 401(k) Retirement Savings Plan with attractive company matching contributionsCompany-paid employee Life Insurance with options for YOU and your Family!Short-term and Long-term disability insurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Position Summary:Under general supervision, performs diagnostic, service, and installation of plumbing in residential and light-commercial environments. Holds plumbing and/or gas license as required by governmental regulations. Ensures that work is performed in accordance with relevant codes. Assembles, installs, or repairs pipes, fittings, or fixtures of heating, water, or drainage systems in accordance to specifications and plumbing codes. Communicates with customer to answer questions, resolves problems, and ensures complete customer satisfaction. Promotes products and services to customer. Works under the direction of the Field Supervisor or General Manager.Key Responsibilities:Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner. Identifies potential problems to prevent premature and unexpected breakdowns or callbacks.Maintains and repairs plumbing systems carrying water, steam, chemicals and fuel in heating, cooling, lubricating and other process piping systems by replacing defective washers, replacing or mending broken pipes, or opening clogged drains. Repairs or replaces plumbing fixtures; test joints and pipe systems for leaks, open clogged drains, measure, cut, thread, bend, ream and install pipe and pipe fittings. Inspects high pressure, air, steam, water and gas systems to ascertain malfunctions.Assembles pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing, or welding equipment. Weld small pipes or special piping, using specialized techniques, equipment, or materials, such as computer-assisted welding or microchip fabrication.Locates and marks the position of pipe installations, connections, passage holes, or fixtures in structures, using measuring instruments such as rulers or levels, and cuts openingsInstalls pipe assemblies, fittings, valves, appliances such as dishwashers or water heaters, or fixtures such as sinks or toilets, using hand or power tools. Anchors steel supports from ceiling joists to hold pipes in place. Cuts openings in structures to accommodate pipes or pipe fittings, using hand or power tools.Measures, cuts, threads, or bends pipe to required angle, using hand or power tools or machines such as pipe cutters, pipe-threading machines, or pipe-bending machineInstalls underground storm, sanitary, or water piping systems, extending piping as needed to connect fixtures and plumbingReviews blueprints, building codes, or specifications to determine work details or procedures. Interprets drawings and specifications to determine layout requirements. Studies building plans and inspect structures to assess material and equipment needs, to establish the sequence of pipe installations, and to plan installation around obstructions such as electrical wiring.Fills pipes or plumbing fixtures with water or air and observe pressure gauges to detect and locate leaksDirects helpers engaged in pipe cutting, preassembly, or installation of plumbing systems or componentsEnsures company property, vehicles, and tools are being used, maintained and properly accounted forMaintains current plumbing and/or gas license in accordance with governmental regulationsFollows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to branch, and orders/replenishes vehicle stock as neededRepresents the company professionally, honestly, and ethically in all business matters and activitiesPerforms similar/other duties as needed or assignedHealth & Safety Roles and ResponsibilitiesReports any unsafe acts, conditions and hazards to direct supervisor/manager immediatelyReports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediatelyCorrects substandard acts or conditions within area of controlUses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s)Never removes or renders ineffective any safety guards, devices, or clothing prescribed to be in place or wornComplies with the general rules as prescribed by company program(s) procedure(s)Operates devises or equipment as prescribed by company program(s) or procedure(s)Participates in any safety initiatives, teams, or committeesReports all injuries or incidents as prescribed by company program(s) or procedure(s) immediatelyProvides input on developing safety initiatives and plans to eliminate exposures that could cause accidentsDoes not perform any act that may endanger the safety or well-being of othersDoes not engage in any pranks, contests, or rough boisterous behaviorWorks in compliance with applicable legislative requirementQualificationsHigh School diploma or equivalent with on-the-job and formal classroom training in plumbing work in construction, maintenance, commercial, and residential environmentFour years’ experience in plumbing repair, maintenance, and installation in addition to on-the-job trainingPlumbing and/or gas license as required by local, state, provincial, or national governmental regulationsEPA and safety certifications requiredCurrent knowledge of and continuing education in national, state, and local plumbing code regulationsProficient mechanical aptitude and the ability to operate all necessary tools and equipment to perform various plumbing projectsKnowledge of machines and tools used in the construction or repair of houses, buildings and other structures. This knowledge includes machine and tools design, uses, repairs, and maintenance.Working proficiency in basic mathematics and metric and standard measurementsProficient at reading wiring diagrams and troubleshooting problems with plumbing systems and equipmentEffective communication skills to communicate with customer and resolve customer issues, complaints, or concernsEffective and efficient time-management and organizational skillsFamiliar with the HVAC industry is preferredMust be willing to train new plumbers in technical skills and company proceduresValid driver’s license with acceptable driving recordAvailable to work flexible hours and on-call shifts as neededAbility to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl.Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areasAbility to safely climb 300lb load capacity rated laddersNatural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perceptionAbility to lift up to 100 pounds with assistance and ability to lift and carry items weighing up to 50 pounds

Key Job Duties and Responsibilities: Create and update seasonal maintenance staff schedules according to management specifications.Ensure all time and pay is approved in a timely manner within payroll timelines.Input, create, and process purchase requests for maintenance department as needed.Create, update, and maintain all ride bulletins, manuals, and Maintenance library.Ensure that all contracts, indemnities, and other related documents are created, approved, signed, and filed as needed.Other duties as assigned. Job Requirements: Must be available for work on weekdays, since typical working schedule will be Monday-Friday 8am to 4:30pm.Proficiency in Microsoft Office, Optim8, Maximo, and Microsoft Project Manager a plus.Must be able to walk through heavy construction sites to provide photo documentation.Strong communication skills, both oral and written.Must be self-motivated, detail-oriented, and work well with others.Must be able to work in a fast-paced environment.Must be able to drive passenger vehicles.Candidates must be at least 18 years of age.One year of park experience preferred.

Overview: Driver's Edge Auto Repair has delivered fast and easy service for over 10 years. We proudly serve the greater Dallas & Fort Worth areas and provide great service on an array of automotive services, optimizing performance utilizing proven processes inside of a systematic approach to automotive repair.The General Service Technician will perform non-technical service repairs such as oil changes, tire and wheel related services, alignments, flushes, and more. While working alongside ASE Certified Automotive Technicians, you will get the training necessary to get to the next level in your career. If you are interested in becoming a certified ASE Automotive Technician, this is the opportunity for you. This could be the beginning of your successful career. Starting at: $13.00/Hr. to $16.00/Hr. Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities : Performs tire mounting/dismounting, wheel balance and tire rotation. Performs oil changes and other basic services Utilizes the company's Multi-point Inspection and/or Repair Order to properly document the vehicle condition Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance Requires driving vehicles in a safe and courteous manner obeying all traffic laws Includes transporting customers, picking up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle Conducts State Safety and Emission Inspections (in applicable locations) on vehicles in an ethical manner following all company and state guidelines Follows all safety procedures and reports any concerns to direct supervisor Ability to work flexible schedules, including weekends as needed. Other duties as assigned by direct supervisor Adheres to Sun Auto's core values, and all company policies and procedures as outlined in the Sun Auto Tire & Service Employee Handbook Qualifications : Possesses a general understanding of under the hood, mechanical and under carriage assemblies is preferred Valid Driver's license in the work State Ability to obtain a State Inspector License is preferred High School Diploma or equivalent preferred Working Conditions and Physical Demands : The General Service Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions .The General Service Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently. Communicate with customers and shop personnel Vision sufficient to detect color, depth, and re-focus Previous automotive experience preferred, but we will consider energetic and hard-working individuals with a passion for cars. Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there is ALWAYS something to do. Must possess a valid driver's license and be able to pass a pre-employment drug test, MVR, and criminal background check.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#bayard

The Electrician will be accountable for the efficient operation of all the electrical-related equipment and instrumentation throughout the facility, both inside and outside of the building. This position is also responsible for the successful utilization of the Computerized Maintenance Management System. Additional Information: Night Shift- 12 hour Rotating Schedule Here, we believe there’s not one path to success, we believe in careers that grow with you. Whoever you are or wherever you come from in the world, there’s a place for you at Sherwin-Williams. We provide you with the opportunity to explore your curiosity and drive us forward. Sherwin-Williams values the unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans. We’ll give you the space to share your strengths and we want you show us what you can do. You can innovate, grow and discover in a place where you can thrive and Let Your Colors Show! At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commuteit matters to us. A general description of benefits offered can be found at http://www.myswbenefits.com/. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Sherwin-Williams is proud to be an Equal Employment Opportunity/Affirmative Action employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Experience with rotary fillers, casepackers, palletizers, or wrappers (robotics highly preferred)Read and interpret ladder logic diagrams, read blueprints, wiring diagrams and make own layouts as requiredIndependently trouble shoot, diagnose, repair, and install a range of equipment from low voltage to 480 volt/277 volt circuits, motor controls, control logic, and power wiring.Make new major installations and repairs as well as perform general maintenance and repairs. • Use necessary tools and instruments to independently perform tasks.Obtain parts from storeroom and assign parts to work orders using the computerized maintenance management system.Must know and follow safety instructions and maintain housekeeping procedures.Notify supervisor, emergency coordinator and other plant authorities as necessary in emergency situations.Participate in the development of Standard Operating Procedures for equipment & Maintenance tasks; regularly use these documents to ensure safe and efficient maintenance work.Assist in the capture and upkeep of accurate equipment information in the Computerized Maintenance Management System database.Participate in the initial installation & upkeep of equipment and piping label as required by plant policy.Develop personal skills through ongoing training both at the plant and through outside training classes.Support the implementation and maintenance of an effective Preventative Maintenance program.Make timely reporting & documentation of equipment breakdowns or mis-operation; provide troubleshooting to minimize downtime of plant equipment.Record information required for Work Order closure time-spent on task, details on the work performed, additional work required and parts that were used.Minimum Qualifications: Must have the legal right to work in the country of employment without needing sponsorship now or in the future for employment visa statusMust be at least 18 years of ageMust have one (1) year of work experience in maintenanceHave at least an industrial, electrical, and/or welding certification or license Preferred Qualifications Have at least two (2) years of work experience in maintenanceHave at least one (1) year of experience with manufacturing processes i.e. valves, pumps, etc (pigging systems).

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily . WHAT WE OFFER We are a large company serving many unique customers - because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering: Ongoing Education & Training Exposure to a Large Variety of Projects Industry-leading Benefit Packages Advanced support and tools designed to improve your workflow Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: 3+ years of commercial experience as an HVAC and Refrigeration Technician Active EPA Certification Valid driver's license Excellent customer relations and interpersonal skills Mechanical aptitude and troubleshooting skills Ability to safely lift to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doResponsible for meeting customer expectations while performing quality inspections.How you will do itPerform routine inspections, testing, servicing, installing and preventative maintenance of life safety product lines as well as similar competitive manufacturer's product line.Work with low voltage wiring and associated devices for the operation of low voltage equipment.Learn to complete Service Acknowledgements with proper coding through communication devices, such as laptop computers and/or hard copy.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documentation program via the laptop computer.Make minor repairs and programming changes while under direct authorized supervision.Complete assigned inspections on time.Perform other duties as assigned.What we look forRequiredREM-I License5 - 10 years documented experience in sprinkler systems.Able to obtain and retain any licenses that are required by National, State and Local codes.Experience with hand tools and multi-meter usageExperience with wet, dry, pre-action, deluge, and foam systemsDemonstrates an aptitude for troubleshooting systems and performing necessary repairs.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including on-call rotation, nights, and weekends to meet customer requirements.Willing to travel out of town.Demonstrate a high level of customer service.Ability to adhere to, implement, and always follow safety guidelines and procedures.Strong organizational skills, positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.PreferredRepair experienceBackflow certificationNICET Level II certificationJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

About Hawx Hawx Pest Control is a technology-driven company that is revolutionizing the pest management industry. Hawx serves a crucial public health function by using state-of-the-art equipment and environmentally conscious products to protect the people and places our customers love. At Hawx we pride ourselves on our internal company culture. Our team members benefit from being part of a company that actively rewards employees for being team players while providing ample opportunity for personal and professional growth. We understand how important it is to recruit and reward people who are enthusiastic about developing their careers and opening new opportunities while delivering a best-in-class customer experience. Job Summary We are seeking to hire a talented Seasonal Service Professional who will inspect and perform pest control treatments for residential and commercial customers using high quality and environmentally responsible products.DETAILS $17 - $18Full-time positionWork travel required Responsibilities Perform efficient routes individually.Enter and exit structures, crawl spaces and climb on top of structures.Address and alleviate customer concerns and pest related issues by using integrated pest management strategiesMaintain and care for company equipment, vehicle and gas card and other job-related items.Complete all duties required by a pest/mosquito/termite service professional: customer consultation, inspection, eliminate/identify conducive conditions and proper treatments.Record work activities and complete all paperwork after finishing services.Exemplify safe performance of job duties and adherence to safety policies and procedures. Qualifications TRAITS Reliable: Establishes and upholds our company culture and values. Believes in the company mission and the Hawx culture of excellence. Shows up on time and gets the job done. Stays on top of tasks and manages time and responsibilities well. People Person: Keeps things positive and gets energy from people. Adaptable and flexible while working with different personality styles. Develops strong working relationships with frontline team members. Enjoys working cross-functionally with Sales teams and knows how to relate to and work with them. SKILLS Top Performance: Sets the bar for the team in service quality and route efficiency.Effective Communication: Works well with team members of any skill level to level up their performance and has the ability to onboard and train new hires.Technical Expertise: Has a solid understanding of the pest control field and the technical aspects of the job being performed by frontline employees. Field Leads must understand protocols, application techniques, products, equipment and other tools that are used on a day to day basis so they can train and coach to a high standard. EXPERIENCE & OTHER REQUIREMENTS Pest management experience, preferably in a residential market, with responsibilities related to coaching and developing frontline team members.Must have and maintain any required state licenses/certifications.Must be 21 years or older with a valid driver's license.Must pass required background check and drug screening.Hawx Services, LLC is an Equal Opportunity Employer committed to fostering an inclusive work environment with the most qualified employees. Both in our hiring process and in the experiences that our team members have as employees, Hawx is committed to diversity, equity, and inclusion. Accordingly, Hawx is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, sexual orientation, age, marital status, disability, gender identity, or veteran status.

Location: Dallas, TXWhy You Should Join the Service Experts Team Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT!Service Experts Company Perks and Benefits for YOUTop Pay for Top Performers, including incentive and bonus opportunities, depending on the positionUp to $130,000 on average First Year Total Compensation” Total Compensation is Hourly plus Spiffs/Commissions***Depending on Center this could be moreGenerous PTO provided:20 paid days off within your first year of employment (vacation & national holidays)25 paid days off after your 2nd year of employmentNo layoffs during “Slow Season” – due to our extensive customer base, you will never have to worry about not being able to provide for your family year-roundReady to get out of your work truck We have ample advancement and career-growth opportunities available across the U.S.Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programsWe provided wellness program options for free employee medicalCompany-provided smart phone, tablet, uniform plan, and tool replacement programWe’ll make you better at what you do with our internal Training AcademyBest-in-class 401(k) Retirement Savings Plan with attractive company matching contributionsCompany-paid employee Life Insurance with options for YOU and your Family!Short-term and Long-term disability insurance options that will protect you and your family if you are unable to workSupplemental benefit programs such as:Legal advice, pet insurance, and health advocacy programsCome join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing!Key Responsibilities:Works under minimal supervision to perform residential and/or light commercial service and maintenance calls Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks Completes routine maintenance and equipment cleaning as needed or required Responsible for delivery and removal of parts and equipment needed to complete service work Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer. Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit. Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for Represents the company professionally, honestly, and ethically in all business matters and activities Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed Performs similar/other duties as needed or assigned Regular, reliable attendanceHealth & Safety Roles and ResponsibilitiesReports any unsafe acts, conditions and hazards to direct supervisor/manager immediatelyReports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediatelyCorrects substandard acts or conditions within area of controlUses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s)Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or wornComplies with the general rules as prescribed by company program(s) procedure(s)Operates devises or equipment as prescribed by company program(s) or procedure(s)Participates in any safety initiatives, teams, or committeesReports all injuries or incidents as prescribed by company program(s) or procedure(s) immediatelyProvides input on developing safety initiatives and plans to eliminate exposures that could cause accidentsDoes not perform act that may endanger the safety or well-being of othersDoes not engage in any pranks, contests, or rough boisterous behaviorWorks in compliance with applicable legislative requirementQualifications:High school diploma or GED with additional training and 2 to 5 years’ experience in HVAC with technical training certification required Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area EPA and safety certifications required Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories Proficient mechanical aptitude and the ability to operate all necessary tools and equipment Proficient and able to operate all necessary tools and equipment to perform various service projects Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision Proficient and able to install a basic duct fitting Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns Effective and efficient time-management and organizational skills Valid driver’s license with acceptable driving record Available to work flexible hours and on-call shifts as needed Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl. Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception Ability to lift up to 75 pounds and ability to lift and carry items weighing up to 50 pounds

SPECIFIC DUTIES AND RESPONSIBILITES: Install, maintain, and repair heating, air-conditioning, refrigeration, and ice house equipmentMaintain and assist in the control energy management systemsRespond to service calls and expedite repairsMaintain preventative maintenance schedulesMaintain records of equipment installed and removedMaintain and repair make-up exhaust air handling units, including fans and motorsMaintain and repair chiller units and associated equipmentWork with various departments to ensure safe and timely repairs are completedGeneral Mechanical and Plumbing experience a plus SKILLS AND QUALIFICATIONS: Must be at least 18 years of age and possess a high school diploma or equivalentAt least 3 years commercial, industrial HVAC experience preferredCurrent EPA license (or obtain within 6 months)Must be able to work varied shifts, days, nights, and weekends including extended hours when required and willing to work under various weather conditionsMust be physically fit and able to climb stairs/ladders up to heights of 50 or more feetMust be able to lift up to 50 pounds and stand for extended periods of timeMust be able to stoop, bend, and lift regularlyMust be self-motivated and able to perform tasks with minimal supervisionAble to provide own basic hand toolsMust possess a valid driver’s license, a good driving record, and successfully complete all authorized employment screenings and criminal background checks If you are able to answer "YES" to all of the following questions, please continue the application process by clicking "Apply" Can you provide legal documentation establishing your identity and eligibility to be legally employed in the United States Are you able to perform the essential functions of the job for which you are applying with or without reasonable accommodation Within the last 90 days, can you state that you have not used illegal or social drugs (excluding marijuana), such as MDMA (Molly), cocaine and crystal methamphetamine Are you willing to comply with our grooming code which prohibits facial jewelry (other than 2 matching pairs of earrings), extreme haircuts/styles, colors, and visible tattoos on or above the neck or any single tattoo or cluster of tattoos larger than 4” by 4”. (Please answer “YES” if you believe you would qualify for a religious accommodation which might exempt you.)I am willing to agree that future text messages relating to Six Flags, Inc., including company news, job posting application status updates, and other information, may be sent on behalf of Six Flags, Inc. to the cell phone number I provide.

Overview: Driver's Edge Auto Repair has delivered fast and easy service for over 10 years. We proudly serve the greater Dallas & Fort Worth areas and provide great service on an array of automotive services, optimizing performance utilizing proven processes inside of a systematic approach to automotive repair.The General Service Technician will perform non-technical service repairs such as oil changes, tire and wheel related services, alignments, flushes, and more. While working alongside ASE Certified Automotive Technicians, you will get the training necessary to get to the next level in your career. If you are interested in becoming a certified ASE Automotive Technician, this is the opportunity for you. This could be the beginning of your successful career. Looking for a State Inspector! Starting at: $13.00/Hr. to $16.00/Hr. Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities : Performs tire mounting/dismounting, wheel balance and tire rotation. Performs oil changes and other basic services Utilizes the company's Multi-point Inspection and/or Repair Order to properly document the vehicle condition Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance Requires driving vehicles in a safe and courteous manner obeying all traffic laws Includes transporting customers, picking up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle Conducts State Safety and Emission Inspections (in applicable locations) on vehicles in an ethical manner following all company and state guidelines Follows all safety procedures and reports any concerns to direct supervisor Ability to work flexible schedules, including weekends as needed. Other duties as assigned by direct supervisor Adheres to Sun Auto's core values, and all company policies and procedures as outlined in the Sun Auto Tire & Service Employee Handbook Qualifications : Has a valid state inspector license Possesses a general understanding of under the hood, mechanical and under carriage assemblies is preferred Valid Driver's license in the work State Ability to obtain a State Inspector License is preferred High School Diploma or equivalent preferred Working Conditions and Physical Demands : The General Service Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions .The General Service Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently. Communicate with customers and shop personnel Vision sufficient to detect color, depth, and re-focus Previous automotive experience preferred, but we will consider energetic and hard-working individuals with a passion for cars. Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there is ALWAYS something to do. Must possess a valid driver's license and be able to pass a pre-employment drug test, MVR, and criminal background check.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#bayard

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay, based upon the UA Local 100/146 rates.Comprehensive benefits package provided by the UA Local 100/146.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doJohnson Controls Inc. is looking for forward-thinking talent to join our growing organization. During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant building automation technologies in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.We are looking for a skilled mechanic who has experience with air cooled or water-cooled machines to work with top of the line commercial and industrial equipment.We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.What we look forRequiredMust be a member of or willing to join the local United Pipefitters Association (UA Local 100/146).Journeyman status required.Minimum of 5 years of practical working experience on air- cooled and water-cooled chillers with strong HVAC/ mechanical troubleshooting experience.You may be required to pass a knowledge examination to assess proficiencies.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, and valid driver's licenseJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.