Martin Foods is looking for an experienced Maintenance Supervisor to oversee the maintenance department at their Houston facility. This facility produces various meat products for a multitude of restaurants throughout the region. The ideal candidate is an experienced maintenance expert, who can create a highly functioning department with a well-organized parts department, a well-organized and documented PM System, a thorough analysis of our equipment and its capabilities and how to optimize throughput/output as well as capture the highest ROI with additional investment in equipment.
Strong mechanical ability and a working knowledge of electrical, mechanical and PLC systems are required.
Key Accountabilities: Maintain the highest levels of workplace safety and food safety at all times. Ensure all equipment is running safely and properly, that downtime is minimized Understand all equipment needs for the plants and provide the necessary maintenance support for the plant to achieve its goals. Control all department costs including labor and inventory/parts. Develop and manage a robust inventory/parts system/program. Develops a high performing Team and actively promotes the company Values. Develops and maintains KPIs that effectively monitor progress around all key. deliverables within the department.
Primary Job Duties: Supervise the maintenance of plant equipment and manage preventative maintenance on production equipment and document as required. Plan, layout and schedule work for functional areas of responsibility and delegate work on a project or individual basis to maintenance technicians. Hire, train, monitor, discipline, evaluate and develop employees. Assist subordinates with diagnosing and remedying difficult problems. Enforcing organizational policies and employee rules of conduct. Monitor and regulate the operation of departmental areas and investigate solutions to complex problems affecting functional areas of responsibility. As needed, source outside vendors; establish project scope. Develop and monitor formal control programs to track and regulate repair costs and spare parts inventories. Work with corporate and project management personnel to design, plan, schedule and complete capital improvement projects. Prepare and maintain department reporting and record-keeping systems. Maintain good housekeeping conditions and ensure employee conformance to safety and sanitation rules and regulations. Develop, implement and ensure adherence to SOP’s. Develop and maintain qualifications and training standards for all maintenance personnel. Interface with regulatory and third-party agencies including USDA, OSHA, EPA, DEQ, and Fire Department, etc. Develop and manage departmental budgets. Serves as backup to maintenance technicians as necessary. Other duties as assigned.
Benefits: Competitive Health & Welfare Benefits Company-Matched 401(k) Savings Plan Award Program Potential Paid Vacation Paid Holidays Product Discount
Qualifications: 3 – 5 years of related management experience (within a food processing environment is preferred). Associate’s Degree or equivalent is preferred Strong mechanical ability and a working knowledge of electrical, mechanical and PLC systems are required. Demonstrated ability to apply and conduct good root cause analysis techniques and resolve problems is essential. Computer proficiency in Word, Excel, Internet, e-mail and database systems is required. Working knowledge of maintenance tracking software programs is desired. Must have a strong floor presence and be able to interact effectively with people at all levels. Be capable and confident in communicating at all levels of the organization from the executive team to the shop floor team members. Ability to lift and move over 50 pounds with or without reasonable accommodation is required. Full range of body motion Ability to work in cold environments, wet environments and hot environments.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

DescriptionWe have a wide variety of career opportunities around the world come find yours.Technical Operations/MaintenanceTechnical Operations includes the maintenance, and overhaul of our aircraft. This includes aircraft maintenance technicians, engineers, planners, ground equipment and facilities teams, supply chain teams and more.Job overview and responsibilitiesStudies, analyzes, and seeks solutions to problems related to the design, operation, maintenance, performance, modification, or repair of aircraft, and their componentsUses a structured, logical, and analytical approach in problem solvingDefines maintenance program, configuration, and serviceability criteria ensuring safe and legal operationsAnalyzes and implements regulatory requirementsEvaluates the effects of modifications or new equipment on reliability and performanceEvaluates the benefits of the cost impact of a fleet decision to ensure an optimum balance of cost, asset utilization, quality, and reliabilityAuthors, designs, tests, and manages projectsProvides on-site technical support for line and base operationsCommunicates with customers on technical issues, work scope recommendations, and failure investigationsInterfaces with internal and external organizations regarding specific aircraft and component issuesThis position develops potentially complex solutions and implementation plans, project justification, cost/benefit analysis, management of project implementation, technical support, and obtaining FAA approvals as requiredCoordinate work with other operational groups to ensure airworthiness, safety, regulatory compliance, operational reliability, and operational efficiencyOrganize and manage the priorities for assigned responsibilities and accomplish the work processes to meet all the deliverables for projects or maintenance program changes/technical specification revisionsQualificationsRequiredB.S. Degree in Engineering (Mechanical, Electrical, Aerospace), related technical field or equivalent relative work experienceMinimum of 2-4 yearsat an engineer level or similar role elsewher in the industrySuccessful candidate will have working knowledge of airline or OEM operationsKnowledge of Code of Regulations (CFRs), airworthiness design and substantiation criteria, aircraft and equipment design and operational characteristicsAbility to interpret complex and technical Engineering and OEM documentsHighly detailed level project development and management for regulatory compliance modifications, and overall ownership of specific systemsEffective communication skillsMust be legally authorized to work in the United States for any employer without sponsorshipSuccessful completion of interview required to meet job qualificationReliable, punctual attendance is an essential function of the positionPreferredWork within specific ATA Airline Systems ChaptersAirline or Industry experience with general ATA Chapters which could encompass, aircraft systems, structures, power plant and avionics disciplinesElectrical Load Analysis (ELA) experience at an airlineSpecific ATA 24 chapter Systems related experienceEqual Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT

Entity: Production & OperationsJob Family Group: Engineering GroupJob Description: The GoM subsea support squad is seeking a Subsea Operations Engineer. The individual will report directly to the GoM Subsea Operations Discipline Manager and will work under the direction of the Subsea Support Squad Lead. The primary responsibility of the Subsea Operations squad is to deliver maximum value from our subsea operations by optimizing the balance between risk, production, and cost, while delivering step changes in performance through innovation by our people. The overall health and availability of the subsea systems is maintained through the Subsea Operations support squad within the Production Support Unit. The engineer will work across all GoM assets, responsible for providing support in delivery of optimization, troubleshooting, inspection, maintenance, and repair of the subsea infrastructure with support from Senior level SS Ops engineers. Improvement of system availability by risk mitigation, elimination of defects, and reduced Mean Time to Repair is a key focus area for all Subsea Support Squad engineers.Key AccountabilitiesDemonstrate safe work practices and support the achievement of the GoM Regions’ performance goals and standards.Support the delivery, maintenance, and utilization of subsea site operating procedures (SOPs) and technical drawings under the direction of a Senior EngineerConduct condition monitoring, diagnostics, and resolution of operational issues for Subsea Systems.Integration with topsides engineering and subsea project teams in support of the area(s) to manage risks in compliance with practices.Work closely with the central subsea organization to steward plans and procedures for subsea interventions and offshore execution activities.Actively participate in applicable HAZIDS, HAZOPS, and risk assessments.Continue technical development through training, site visits, and offshore ROV campaign participationEssential EducationBachelor of Science or equivalent experience in EngineeringActively pursuing PE licenseEssential Experience5+ years of industry experience with an understanding of Subsea Operations fundamentalsWorking knowledge of the various types of equipment within a subsea infrastructure, including instrumentation and controlsDemonstrated ability to network and influence across organizational boundariesGrowth mindset with the willingness to learn and adapt to a dynamic environmentDesirable CriteriaAwareness of common system-based anomalies and flow assurance tactics for a producing subsea systemGeneralized understanding of integrity, maintenance and repair activities for a subsea systemAwareness of the interdependencies between the subsea system and the topsides production utilitiesFamiliarization with creating, maintaining, and utilizing Site Operating ProceduresUnderstanding of reading and utilizing technical drawings commonly used in process operations: P&ID's, simplified flow diagrams, block diagrams, logic diagrams, isometric drawings, equipment specific diagrams, and electrical diagramsUnderstanding of bp’s risk management process, management of change, and basic understanding of root cause failure analysisMust be willing and able to travel to offshore facilities and vessels as required.Why bp At bp, we support our people to learn and grow in a diverse and ambitious environment. We believe that our team is strengthened by diversity. We are committed to fostering an inclusive environment in which everyone is respected and treated fairly.There are many aspects of our employees’ lives that are meaningful, so we offer benefits to enable your work to fit with your life. These benefits can include flexible working options, a generous paid parental leave policy, and excellent retirement benefits, among others!Travel RequirementUp to 10% travel should be expected with this roleRelocation Assistance:This role is not eligible for relocationRemote Type:This position is a hybrid of office/remote workingSkills:Anomaly assessment and management, Defect Elimination, Equipment criticality assessment, Equipment maintenance and inspection strategies, FAT and commissioning, Fatigue Analysis, Fitness for Service, Flanged joint, Integrity Management, Mechanical seals and support systems, Monitoring and data interpretation, Piping, hoses and tubing, Piping vibration, Pressure systems regulatory requirements, Pressure Vessels, Selection and design of pipeline equipment, Stress analysis for integrity and leakage, Valves used for isolation, Wind TurbinesLegal Disclaimer:We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status.Individuals with disabilities may request a reasonable accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an accommodation related to the recruitment process, pleasecontact usto request accommodations.If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Powell Industries, a US manufacturer of low- and medium-voltage electrical equipment for commercial, industrial, and utility systems is seeking highly motivated candidates for a Senior R&D Engineer II as part of an expansion of our Research and Development Department. In this role, you will work with a team of experienced professionals to develop groundbreaking new technologies and product designs, taking initial concepts through to production launch.Powell's products include class-leading vacuum circuit breakers, monitoring, sensing and control electronics, communications and software systems, switchgear, motor control, and safety-focused enclosure systems. Powell's 75-year leadership in vacuum switching technology and arc-flash safety is widely known and in use globally, while being designed and manufactured in multiple facilities in the US, Canada and the UK. One of our three Houston-area manufacturing facilities also includes a prototyping shop and UL-certified high voltage and high current lab, where you will be able to model and validate the performance of your designs in real time. Posted position does not allow for sponsorship or relocation assistance.ExpectationsPropose concepts and develop complex level designs for both existing and new product lines. Deliver innovative designs that meet profit, cost, quality, and time-to-market metrics.Determine and specify design parameters, validate according to standards, and prepare documentation. Investigate patentable concepts.Oversee validation and testing of components/system or assemblies in the development and validation process.Develop test plans based on D/PFMEA, project specifications, industry standards, and reliability and validation requirements for both internal and external laboratories.Direct laboratory testing, analysis of data, and create corrective action plans.Ensure project designs meet requirements of specification and standards while promoting error-proof assembly. Prepare written documentation of processes, material requirements, test results, and project activity as required.Understand and enforce regulatory document requirements.Interface with outside vendors, consultants, and customers.Work with third-party vendors to develop high-quality, lowest-cost design options.Continuously improve engineering processes including DFX, project and product costs, quality, and project lead times.Actively collaborate and provide Engineering support to Sales/Product Management and Manufacturing on new products and processes.Actively participate in and facilitate Product Development Process.May perform other duties as assigned.Job RequirementsBachelor's Degree in Electrical, Mechanical Engineering or Power Engineering. Advanced degree preferred.8+ years of progressive experience in Engineering design and/or development on highly technical and innovative projects.Able to prioritize and manage time effectively. (Self-motivated and self-managing).Working knowledge of electromechanical product design and development.Working knowledge of switchgear and/or controls.Experience with medium/high voltage electrical power systems.Demonstrated complex analytical and problem solving ability.Working knowledge of CAD and/or analysis tools. Working knowledge of regulatory standards (ANSI, IEEE, and IEC).Experience creating and reviewing DFMEA and PFMEA process and documents.Experience developing projects within a Stage-Gate Process.Participation in industry organizations (associations, standards committees, etc.) to stay informed of and to influence industry activities a plus.Proven experience with computers; Microsoft Office, Microsoft Project, or equivalents.Strong technical knowledge in the following categories per discipline: Electrical: Current and Voltage Sensors, Power Systems.Mechanical: Molded Components or Mechanism Design, castings, and metal fabricated parts.Demonstrated ability to write/edit technical documents; test reports, engineering standards, industry technical papers.Demonstrated verbal and written communication skills.Ability to quickly respond to strategic and tactical changes.Working EnvironmentThe employee typically performs duties in a normal office environment. There will be some work in our manufacturing shop facilities, as well as in our electrical test lab.#LI-CABAbout UsIn our 70+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated and assembled to customer specifications!Powered by Innovation - Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story, and let us help you write yours. Hard work pays off in all of our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted.We are an Affirmative Action and Equal Opportunity Employer/Vet/DisabilityIf you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Our client, an Energy Infrastructure Company,is seeking an Electronic Flow Measurement Engineerto join their team. As an EFM Engineer, you will be part of the Products teamsupporting liquid pipeline systems. Job Title:Electronic Flow Measurement Engineer Location: Houston, TX What’s the Job Specify EFM equipment Perform configuration of and technical support for products flow computers Specify peripheral equipment (enclosures, power supplies, solar power systems, transmitters, modems, cabling, terminal blocks, etc) Perform configuration of and technical support for products flow computers: ABB Spirit and FlowX, Omni, and Emerson ROCs. Write documentation for EFM system What’s Needed BS in Engineering from an accredited University, having a minimum of 5 years relevant experience. Applicants without an Engineering degree having ten years of relevant industry experience, will also be considered Possess project management skills used in the development of project documents Travels from 15-20% of time to field sites and offices with occasional overnight stays On-call support for Gas Control, field personnel or Management, related to operational problems on the measurement and SCADA system If this is a role that interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of:Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands –Manpower, Experis, Talent Solutions, and Jefferson Wells– creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

At Houston Methodist, the Research Engineer I position is responsible for providing technical support for laboratory-based research. This position, under the direction of a Principle Investigator (PI), may support bench techniques, working with laboratory animals, scientific writing, and data analysis. The Research Engineer I position may oversee equipment calibration, certification and maintenance agreements as well as operate a variety of laboratory equipment. This position may participate in the development or establishment of new laboratory procedures, including biological assays, quantitative and qualitative analyses. PEOPLE ESSENTIAL FUNCTIONSMaintains/manages contact with sponsors.Contributes to teamwork by responding positively to requests for assistance to achieve optimal department results. Collaborates with all members of the department by actively communicating and reporting data in a comprehensive manner.Conducts self in a manner that is congruent with cultural diversity, equity and inclusion principles. Contributes towards improvement of department scores for employee engagement, i.e. peer-to-peer accountability.SERVICE ESSENTIAL FUNCTIONSCreates designs for instruments or devices.Accurately writes protocols, procedures, research and grant proposals.Safely operates a variety of laboratory equipment. Effectively utilizes computer systems, including office applications, and statistical or technical software.QUALITY/SAFETY ESSENTIAL FUNCTIONSAnalyzes, implements and tests materials. Accurately collects, records, compiles and analyzes data.Handles human and/or animal tissue according to department protocols and policies.Oversees equipment calibration, certification and maintenance agreements.Maintains safety, emergency preparedness, MSDS and other Laboratory Specific procedures.FINANCE ESSENTIAL FUNCTIONSUtilizes resources with cost effectiveness and value creation in mind. Self-motivated to independently manage time effectively and prioritize daily tasks, assisting coworkers as needed.GROWTH/INNOVATION ESSENTIAL FUNCTIONSParticipates in the development or establishment of new laboratory procedures, including biological assays, quantitative and qualitative analyses.Seeks opportunities to identify self-development needs and takes appropriate action. Ensures own career discussions occur with appropriate management. Completes and updates the My Development Plan on an on-going basis.This job description is not intended to be all-inclusive; the employee will also perform other reasonably related business/job duties as assigned. Houston Methodist reserves the right to revise job duties and responsibilities as the need arises. EDUCATIONBachelor of Arts or Science degreeWORK EXPERIENCENone LICENSES AND CERTIFICATIONS - REQUIREDN/ALICENSES AND CERTIFICATIONS - PREFERREDEngineers in Training-EIT Certification KNOWLEDGE, SKILLS, AND ABILITIESDemonstrates the skills and competencies necessary to safely perform the assigned job, determined through on-going skills, competency assessments, and performance evaluationsSufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or securityAbility to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principlesAbility to analyze complex clinical and research dataAbility to interpret compliance requirementsExhibits good listening skillsAbility to work independently and analyze and solve problemsDemonstrates the ability to manage complex clinical and interpersonal situationsAble to prioritize tasks and manage multiple projectsSelf-motivated with the ability to think critically and work independentlySUPPLEMENTAL REQUIREMENTSWORK ATTIREUniform NoScrubs NoBusiness professional YesOther (department approved) YesON-CALL**Note that employees may be required to be on-call during emergencies (ie. DIsaster, Severe Weather Events, etc) regardless of selection below.On Call* NoTRAVEL****Travel specifications may vary by department**May require travel within the Houston Metropolitan area NoMay require travel outside Houston Metropolitan area NoCompany Profile:Houston Methodist Academic Institute oversees the Education Institute and Research Institute, including 772 faculty and 56,250 learners. The Academic Institute aligns our research and education initiatives in service to the clinical mission, providing solutions that answer the call for new technologies and skills our clinicians need for patient care. Houston Methodist Education Institute coordinates our primary academic affiliation with Weill Cornell Medicine and other joint programs, including the Engineering Medicine Program at Texas A&M University Intercollegiate School of Engineering Medicine. The Education Institute also oversees continuing medical education and graduate medical education, and supports more than 1,000 trainees in residence for medical, nursing, allied health and research education programs. Houston Methodist Research Institute supports research programs and infrastructure that enable faculty across the system to bring new scientific discoveries to patients as rapidly as possible through the full cycle of a cure from conceptual bench research, to prototyping and development, to clinical trials and FDA approval. The Research Institute supports more than 1,387 clinical research protocols and $70.3 million in extramurally funded translational research programs.Houston Methodist is an equal opportunity employer inclusive of women, minorities, disabled persons and veterans.Equal Employment OpportunityHouston Methodist is an Equal Opportunity Employer.Equal employment opportunity is a sound and just concept to which Houston Methodist is firmly bound. Houston Methodist will not engage in discrimination against or harassment of any person employed or seeking employment with Houston Methodist on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or other characteristics protected by law. VEVRAA Federal Contractor – priority referral Protected Veterans requested.

Build your best future with theJohnson ControlsteamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of theJohnson Controlsfamily and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaidvacation/holidays/sicktime-15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care –Available day oneEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out!:https://youtu.be/pdZMNrDJviYWhat you will doUnder general direction, supports the construction sales team by assisting with pre and post sales activities on building systems, and equipment project opportunities.Pre-sales activities include, but are not limitedto,system configuration validation, HVAC equipment, and or controls selection for basis of design as well as bidding, application, and pricing. This role will receive direction, coaching support from assigned account executives, and sales leadership on pre-sale needs and expectation.Post sales activities, include equipment execution that is profitable, accurate, on-time, within the scope of the contract and in alignment with customers’ expectations. Develops, and provides detailed engineering information and submittals to communicate design, configuration, operating and installation requirements to customers, consultants, Johnson Controls service and necessary subcontractors. Works with assigned sales team to maintain and effective balance between customer satisfaction and project financial results when performing pre-sales and or post sales duties.How you will do itProvides technical support, selections, and limited estimating support to Account Executives during project design or proposal phase. Assist as needed in developing the customers’ business case for conceptual solution.Supports detailed estimating of projects for Account Executives to finalize and present to clients.Validates assumptions made during the proposal and development phase. Builds a detailed cost estimate and scope of work for assigned projects in conjunction with sales. Assists in preparing proposals and other customer communication documents as well as assists with any design work required.Prepares customers proposals quote letters for assigned projects, includes project takeoff’s specification review, special quote generation, and RFQ and RFI issuance.Manages project Profit & Loss (P&L) of all assigned projects, accomplishes this utilizing the Johnson Controls equipment order execution process, including execution of the equipment orders, etc...Also,by working closely with the branch to manage backlog execution, schedule, and forecast execution of equipment projects, for up to two years in advance.Verifies the approval submittal, configuration acceptance by the installation contractor prior to leasing equipment for fabrication. Very carefully evaluates the contractual scope of supply and the impact of client-issued bulletins, field directives, and or scheduling changes, and coordinates accordingly. Works on preparing change order proposals with the sales team, and in that process performs all related tasks.Coordinates the factory equipment order process to ensure technical and commercial compliance with contract documents and site requirements.Responsible for generating technical content Purchase Orders, for all material and equipment, selects orders, and tracks the delivery of the materials, and equipment for all assigned projects working very closely with all parties, including the customer.Effectively communicates project progress including financials to all management team that has a need to know.Reviews and process all invoices for payment all related to assigned projects, as well as works very closely with the operations teamto addressany billing or collection issues are done on a timely manner.As required, visits customers sites to ensure delivery and receipt of critical equipment meet all compliance of Johnson Controls and the customer owner.Maintains viable long-term relationships with customers, consultants, prime contractors, and subcontractors and attends all necessary meetings.What we look forRequiredBA degree Three to five years of related work experience, or minimum of 6 years related work experience in HVAC equipment, controls, or similar field.Experience with Microsoft Office suite, (with emphasis on Word, Excel, and Visio) Adobe Writer, and basic Windows operating system environment.If no experience will consider a new Technical Engineering or Construction degree recent graduate.Ability to work independently and as part of a team.Demonstrated ability to simultaneously manage a large and diverse number of projects with professionalism, cooperation, and persistence.Demonstrated ability to organizational and attention to details.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Dedicated to sustainable development, Arup is a collective of designers, consultants and experts working globally. Founded to be humane and excellent, we collaborate with our clients and partners using imagination, technology, and rigor to shape a better world. We are a thriving and growing team of designers, planners, engineers, consultants, and technical specialists who are experienced in planning and implementing extraordinary, sustainability-focused healthcare facilities while supporting high quality operations by aligning people, processes, and assets. Arup is focused on outcomes, shaping healthcare environments and processes that promote healing, efficiency, and resiliency. Build a future with purpose and join our highly collaborative, international network of specialists to deliver and push the boundaries in the industry. Arup is seeking an experienced Mechanical Engineer Leader to join our Houston, TX office as a Healthcare Client and Project Manager. This individual will work on significant high profile and outstanding projects within the Healthcare Environments and Buildings sector. Some of our significant projects include but are not limited to: CommonSpirit Health – McNair Expansion Project – 450k sf buildout of the existing hospital with significant infrastructure upgrades to support the expansionHarris Health System LBJ Expansion Project – 1.35M sf replacement hospital with a new central utility plant and parking garage Houston is a modern, diverse city with broad-based industries, a sophisticated and advanced technical workforce, and a vibrant culture. Arup has been active in the Texas market since the late 1980s, providing professional engineering services on a wide variety of projects in the energy, transportation, and property sectors. To continue our contributions and widen our influence across the built environment in Texas, Arup’s Houston office was established in the early 2000s. In the healthcare sector, Arup supports and are advisors to many of the healthcare systems in the local market including Houston Methodist Hospital, CommonSpirit Health, Harris Health System and Texas Children’s Hospital. Responsibilities: Lead effort to deliver HVAC design for hospital, MOB, and laboratory work.Procure healthcare work in conjunction with the senior management of the group.Build design group skills in the provision of sustainable designs based on most recent scientific evidence in the field related to environments that support improved health and patient outcomes.Supervise a team of junior engineers in design delivery.Be primary contact for team with architects and Owners.Provide general multidisciplinary coordination oversight including 3D delivery for healthcare projects.Build, renew, and maintain relationships with healthcare owners for the purposes of obtaining repeat business.Be recognized in the field as an expert in all aspects of regulatory compliance related to design for disease control.Coordinating with multiple subject areas and working in conjunction with project managers to help complete work you're leading.Drafting reports for internal and external purposes based on findings.Presenting technical material in traditional and innovative ways for review by technical and non-technical audiences.Participating in local Professional Associations Requirements: Bachelor’s degree in mechanical or architectural EngineeringMinimum of 7+ years of relevant experience in Mechanical Engineering Fundamentals, with at least 100,000+ sq. ft. of hospital design experience in the past 5+ years, with evidence of involvement in concept design through construction administration and commissioning of systemsPE License in TX is requiredAbility work under pressure, prioritize effectively, lead deadlines and exceptional organization skills required for our rapidly changing environment. Benefits that Work- At Arup, we have a comprehensive and valuable benefits program that works for our employees and their families while keeping costs low. These benefits provide health and welfare security for you as well as paid time off for rest and renewal. Our Global Profit Share Plan (paid bi-annually) provides an opportunity for you to share in the success of the Firm. As a valued employee of Arup, you can also choose to participate in our 401(k) plan with up to 10% company match to help you save for your future. Flexible Working- We believe that flexible arrangements create a more inclusive way of working that supports our diversity and the wellbeing of our people. Options for alternative schedules and the ability to work outside of the office for a portion of your workweek are available. Arup is an equal opportunity employer and all qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, spouse of protected veteran, or disability. #li-nn1

Description Looking for an opportunity to make an impact Unleash your potential at Leidos, where we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer’s success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.If this sounds like an environment where you can thrive, keep reading!Are you looking for an exciting new challenge solving problems with extra high voltage transmission line design Leidos is seeking a Transmission Line Project Engineer to join our dynamic team working in a fast-paced environment!Your Main ObjectiveAs a Lead Engineer on our electric transmission design projects, you'll have the opportunity to work on high-voltage (HV) and extra-high-voltage (EHV) overhead utility systems. You'll be responsible for applying industry standards (ie. NESC, NEC, ASCE) and using your expertise to engineer and design electrical overheads, voltage conversion projects, new capacity projects, and infrastructure replacement projects.This position offers an exciting opportunity for you to develop and lead a high-performing engineering team with direct report responsibilities. Also, taking charge of managing client relations, proposal development, scope creation, and project management.In addition to working alongside a talented team, you'll also be tasked to take on independent projects, including engineering analyses, and prepare bidding documents, plans, and specifications. Also playing a role in preparing material procurement and construction documents, and collaborating with project planning, environmental, permitting, and construction management.Work Location:Houston, TX (with potential for working hybrid schedule between remote and home office) or can be filled fully REMOTE from anywhere within the U.S.Your greatest work is ahead!The Mission Leidos EIA (Energy, Infrastructure, and Automation) helps modernize infrastructure, systems, and security. We are a trusted partner to both government and highly-regulated commercial customers looking for transformative solutions in mission IT, security, software, engineering, and operations. We work with our customers including the FAA, DOE, NASA, National Science Foundation, Transportation Security Administration, Custom and Border Protection, airports, and electric utilities to make the world safer, healthier, and more efficient. Our customers take on the toughest challenges out there, and at times need a helping hand from specialists in their fields. We combine our scale as a Fortune 500 company with the deep technical knowledge of our core capabilities and the expertise of our talented and diverse workforce to deliver mission-centric innovations. For each of these core capabilities, we have developed proven, repeatable processes that help us deliver agile, cost-effective solutions to foster a better world. To explore and learn more, click here!Are you ready to make an impact Begin your journey of a flourishing and meaningful career, share your resume with us today!What Sets You Apart:Bachelor’s degree in Civil Engineering and a minimum of four (4) years of prior relevant experience in the design of electric utility transmission systems.Experience in reviewing full transmission line designs including PLS-CADD models, foundations, materials, plans and profiles, and construction packages.Knowledge of NESC, ACI, AISC, and ASCE code requirements; construction specifications; material procurement process; project schedules; and construction work packages.Ability to develop project scopes, budgets, and proposals.Ability to work effectively in team environment but also able to work independently.Proven ability to communicate with clients and project teams.Leadership experience supervising others (required for Senior and SME Level).Work in client office is a possibility and/or periodic travel may be required.Program Expertise: PLS-CADD and POLE, LPILE or FAD Tools and Microsoft Office.You Might Also Have: EIT, FE, or Professional Engineer (PE) License.Program Experience:PLS Tower, Bentley MicroStation, Bentley ProjectWise, Mathcad, Autodesk AutoCAD.Construction Management and Support experience.At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. We’d like to learn more about you, apply today!PDSTLINEPowerDeliveryPay Range:Pay Range $68,900.00 - $124,550.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Remote

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Entity: Innovation & EngineeringJob Family Group: IT&S GroupJob Description: Enterprise Technology Engineers in the bp Disciplines Modelbp is reinventing itself and digital capability is at the core of this vision. As a Senior Enterprise Technology Engineer, you are a digital expert bringing deep specialist expertise to bp. Enterprise Technology Engineers work on the strategic technology platforms we exploit from the market or come with deep skills in the implementation and integration of market solutions into our overall technology landscape.Generation Management System (GMS)As an Enterprise Technology Engineer for a Generation Management System (GMS), you will help lead the support andoperations ofanewly implemented GMS andits relatedapplicationsandsystems. A working knowledge of maintaining GMS and data intergration with ISO and non-ISO Supervisory Control and Data Acquisition (SCADA) systems will be needed. You will provide support and guidance to ensure alignment of technology with business strategy and goals.You will build and sustain expert knowledge of asset management, integration with ERCOT’s system, and marketoperations withthe potential to expand tootherpowermarkets.Working withbusiness counterparts to identify and define related core business process and standards will be required.Key accountabilitiesThe safety of our people and our customers is our highest priority. The role will advocate and lead in this and promote a culture of security and safety in everything that we do.Work with business to understand ongoing strategy, GMS functional, technical, and support requirements, and to provide or develop technical solutions for meeting their short-term and long-term business goals.Mentor others and become a conduit to connect the broader organization.Responsible for technical support, design, implementation, and maintenance of all OSI Monarch GMS/SCADA related applications: SCADA, AGC, FEP, ICCP, ECA, PI Historian, etc.Perform Generation and SCADA modeling and testing of various generation or load resources across ERCOT, conduct point-to-point checkouts prior to commissioning.Facilitate outage investigation/restoration of service to production environment, quickly solve all GMS/SCADA application problems in order to minimize outage and adverse business impacts.Ensure business process and requirements are adhered to and market changes (regulatory or other) are safely managed as business growth and expansion occur.Effectively manage collaborator communication portfolio status with business and, I&E management.Work with bp Cyber Security and NERC Compliance team to support the analysis of NERC CIP impact ratings for GMS, SCADA, and related systems.Support activities involving business, I&E teams, and vendors in the day-to-day operations and maintenance of bp systems (GMS, PI Historian and Bid-to-Bill) including after-hours tier 3 support, and critical project efforts.Ensure maintenance and support activities are in compliance with I&E IT processes and adhere to Service Level Agreements (SLAs).Perform analysis, consult, and develop recommendations to address complex technical issues as they relate to the operation and control of resources, generation or load acting as a resource (LAARs), initially in the ERCOT market.Support the implementation and deployment of replacement, upgrade, or enhanced versions of the GMS applications and platforms.Responsible for continuous improvement of GMS / SCADA systems and customer process.Essential Education and ExperienceBachelor’s or master’s degree in computer science, engineering, information systems or a numerate degree.5+ years of experience supporting a Generation/Energy Management System.Experience with SCADA communication protocols (ICCP, DNP3.0, Modbus, etc.).Familiarity managing Windows Server configurations, security patches and applications.Extensive knowledge of Operational Technology Systems implementation, system integrations, and software development.Strong understanding of ERCOT QSE operations and managing portfolios of generating resources.Able to provide on-call support for production systems outside of normal working hours.Knowledge of North American Electric Reliability Corp. (NERC) and Critical Infrastructure Protection (CIP) requirements and implications for GMS operations.Demonstrable Knowledge in the application of modern Service Delivery methods - Site Reliability Engineering to traditional ITIL and understanding of Product Based delivery.Strong Communications skills and a high ‘EQ’ with the ability to operate across complex business environments and team members up to senior executive level.Desirable CriteriaOSI Monarch with PI Historian systems knowledge.Broader development experience in one or more object-oriented programming languages (e.g. Python, .NET, C/C++, Java)Project Management experience delivering IT led projects.Broad experience contributing and collaborating to assist design, plan, implement, maintain, and document services and solutions.Strong organizational, conflict resolution, and influencing skills.Ability to balance strategic and tactical concerns and apply good judgement to decisions.Adaptability, fluidity, speed, and initiative in unstructured contexts.Ability to rapidly self-teach and a self-motivated desire to learn new technologies.Genuine curiosity and a strong drive to innovate.Unwavering desire to have a high impact on the organization.An active seeker of personal feedback and a desire for continuous growth.Enjoys mentoring and developing more junior team members.Why join usAt bp, we support our people to learn and grow in a diverse and exciting environment. We believe that our team is strengthened by diversity. We are committed to fostering an inclusive environment in which everyone is respected and treated fairly.There are many aspects of our employees’ lives that are important, so we offer benefits to enable your work to fit with your life. These benefits can include flexible working options, a generous paid parental leave policy, and excellent retirement benefits, among others!We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.Travel RequirementNegligible travel should be expected with this roleRelocation Assistance:This role is not eligible for relocationRemote Type:This position is a hybrid of office/remote workingSkills:Commercial Acumen, Communication, Data Analysis, Data cleansing and transformation, Data domain knowledge, Data Integration, Data Management, Data Manipulation, Data Sourcing, Data strategy and governance, Data Structures and Algorithms, Data visualization and interpretation, Digital Security, Extract, transform and load, Group Problem SolvingLegal Disclaimer:We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status.Individuals with disabilities may request a reasonable accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an accommodation related to the recruitment process, pleasecontact usto request accommodations.If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Powell, located in Southeast Houston, is currently seeking an experienced Lead Project Engineer to join their local Engineering team. The Lead Project Engineer will work with all functions of the business and customers to support large and or complex projects and technical challenges. The Lead Project Engineer will serve as a support and advisor to the Projects teams to help Powell deliver best in class project execution.This position does not offer work visa sponsorship.Essential ResponsibilitiesActively support project planning for large and or complex projectsReview and provide guidance on supplier technical document requirementsAssist in developing customized QC plans based on customer specificationsAdvise and consult with projects teams, sales, senior management, and customers on complex needs and companywide opportunitiesOversee and or support front end design studies as requiredSupport technical discussions and negotiations with clients and suppliersInteract with customers and other external stakeholders to consult and develop creative technical solutionsParticipate and advise in risk review meetingsEnsures project alignment between customer requirements and company objectives to maximize benefit realizationProvide recommendations and technical support on engineering submittals and reviewsProvide support for large and complex project changesAttend and actively participate in project review meetings for large and complex projectsLead and support deviation request, nonconformance reports, and root cause analysisAnticipates and supports the resolution of complex technical issues and clarificationsDocument clear and concise technical responses to complex questions, clarifications, or issuesSupport the development of factory acceptance test plans for large and or complex projectsActively support and participate in factory acceptance tests as requiredProvides support and or attends factory acceptance test for procured equipmentCollaborate across multiple teams and help team members make informed decisionsTrain, mentor and provide advise across multiple teams and functionsPerform other related duties as assignedActively participate in professional associationsContribute to engineering community through publishing of articles and make presentations at national conferencesProductively challenge the status quo in product design and business processesQualificationsBS Degree or MS/PhD preferred and 15 more years of relatable experience. PE strongly preferredKnowledge of National Electric Code, ASCE and IEEE StandardsAbility to accurately explain and foster understanding of concepts and ideas to individuals and groups is essentialProven ability to answer questions for customers (both internally and externally)Capable of Documenting clear and concise technical responses to complex questions, clarifications, or issuesAbility to develop and implement training for colleagues and customersAbility to coach and developExpected Competencies to include: Leadership (Inclusiveness, Critical Thinking)Demonstrated ability to lead and influence a matrix-organized team through the lifecycle of a projectStrong interpersonal skills with the ability to effectively communicate with all stakeholdersDemonstrated ability to make good decisions based on limited informationEstablished ability to negotiate with and influence customers, subcontractors and other key stakeholdersStrong focus on customer satisfactionTechnically astuteWorking ConditionsThe employee typically performs duties in a normal office environment. There may be some work in a manufacturing environment and exposure to the elements of our factory. Additionally, there may be some work performed in the field with exposure to construction sites or active customer facilities.It is the policy of Powell Industries to promote safe working conditions for all employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs, and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents.This position is expected to travel approximately 5-10% of the time and must be able to travel with short notice and/or for extended periods.Physical RequirementsThe physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Regularly required to use hands to touch, hold, handle, or feel.Frequently required to stand; walk; sit; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hearMaintaining body equilibrium and agility to prevent falling when walking, standing, crouching, ascending, or descending stairsThis position does not offer work visa sponsorship.#LI-AB1About UsIn our 70+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated and assembled to customer specifications!Powered by Innovation - Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story, and let us help you write yours. Hard work pays off in all of our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted.We are an Affirmative Action and Equal Opportunity Employer/Vet/DisabilityIf you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Our client, an Industrial Gas Producer, is seeking a Process Systems Engineer to join their team. As a Process Systems Engineer, you will be part of the Process Systems Design Group supporting the Process Gas Product Line. The ideal candidate will have expertise in Air Separation, proficiency in SmartPlant, and a strong background in Hydrogen/Blue Hydrogen, aligning successfully with the organization's goals. Job Title: Process Systems EngineerLocation: Houston, TexasPay Range: Competitive, commensurate with experience What’s the Job Job Responsibilities Engineering Support and Compliance:Deliver all objectives safely, ensuring 100% compliance with safety requirements. Proposal and Project Support:Develop P&IDs for new projects and opportunities, adhering to company standards and customer requirements. Develop functional logic tables, shutdown tables, alarm settings, and safety system parameters. Collaborative Design and Review:Work collaboratively with process engineers, controls engineers, safety engineers, and project managers to align engineering and design during proposal or project development. Lead and contribute to operability, hazard reviews, and safety evaluations. Process Optimization and Documentation:Develop P&IDs Functional Execution Strategy. Develop process systems man-hour estimates for projects. Develop generic P&IDs to support product development efforts. Project Coordination and Commissioning:Lead the review of the 3D piping model and facility arrangement. Participate in DCS Factory Acceptance Test and Site Acceptance Test. Plan and participate in field commissioning activities and operational readiness inspections. What’s Needed Education and Experience:Bachelor’s degree or higher in chemical engineering or equivalent. Minimum 10 years of work experience with a focus on P&ID development in industrial gas or EPC firms. Multi-Discipline Understanding:Balanced multi-discipline understanding in Process System Engineering or plant process engineering. Decision-Making Skills:Proven ability to make balanced decisions weighing operability, reliability, capital costs, and operational costs. Industry Knowledge:Experience with SMR, ATR, Ammonia, and methanol synthesis processes is a plus. Knowledge of Green and Blue Hydrogen technology areas is a strong plus. Software Proficiency:Use of tools such as Bluebeam, Smart Plant PID, Smart Plant 3D Review, and Adobe is a plus. What’s in it for me Medical, Dental, Vision, 401k with Match. Weekly pay with direct deposit. Holiday Pay. Referral Rewards. Monthly Recognition Programs. If this is a role that interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of:Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands –Manpower, Experis, Talent Solutions, and Jefferson Wells– creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

Description Leidos has an excellent opportunity for a Safety Panel Engineer to support NASA's Human Health & Performance Contract (HHPC) at The Johnson Space Center in Houston, Texas. This position is responsible for representing customer interests at Programmatic Safety Review Panels by applying specialized Safety engineering skills and knowledge. The successful candidate will directly interface with other NASA organizations and outside hardware providers through Safety Panel membership and will defend issues raised by reviewers and subject matter experts during Safety Reviews.*This position is located in Houston, TX and offers a flexible / hybrid schedule.The Safety Panel Engineer will perform technical review of Spaceflight Safety Data Packages, Hazard Reports, Non-Compliance Reports, and other supporting data, and will ensure that hazards and their consequences are identified, evaluated, and controlled throughout all phases of the mission and that Safety requirements are met. This role will review safety packages for Health and Medical related concerns and identify discipline-specific issues which require the application of engineering knowledge from several different fields with relevant Subject Matter Experts.US Citizenship or US Permanent Residency and the ability to successfully obtain a Public Trust Security Clearance are required.Primary Responsibilities:• Attend assigned Safety Panel Reviews and engage as an informed Panel member• Explain and defend Health & Medical requirements and positions on particular subjects• Review Safety Data Packages, presentations, Hazard Analyses, and other supporting data• Work with Health and Medical Technical Authority (HMTA) delegates to communicate and elevate safety risks• Participate in and provide recommendations for Safety Panel Support task process improvement efforts• Coordinate with Subject Matter Experts across Human Health & Performance DirectorateMinimum Qualifications:• Bachelor’s degree in Engineering, Medical, or Life Sciences and 5+ years of relevant safety experience• Experience in and / or knowledge of Safety Engineering principles• Excellent oral and written communication skills. Ability to communicate effectively with project managers, project leads, customers, and with contract colleagues is essential• Collaborator who establishes strong working relationships with customers and contract personnel• Demonstrated ability to work independently under supervision and apply professional judgement in establishing objectives, milestones, and priorities• Proficiency in Microsoft Office: Word, Excel, PowerPointPreferred Qualifications:• Prior experience supporting NASA programs• Systems Safety Experience• Experience participating in Safety PanelsOriginal Posting Date:2024-03-15While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $68,900.00 - $124,550.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Featuredjob

Entity: Innovation & EngineeringJob Family Group: IT&S GroupJob Description: Enterprise Technology Engineers in the bp Disciplines Modelbp is reinventing itself and digital capability is at the core of this vision. As a Senior Enterprise Technology Engineer, you are a digital expert bringing deep specialist expertise to bp. Enterprise Technology Engineers work on the strategic technology platforms we exploit from the market or come with deep skills in the implementation and integration of market solutions into our overall technology landscape. You will bring a broad base of Digital technical knowledge and a strong understanding of software delivery principles. You will be familiar with lifecycle methods, with Agile delivery and the DevOps approach at the core. You will be skilled in the application of approaches such as Site Reliability Engineering in the delivery and operation of the technologies you deliver, working as part of multi-disciplinary squads.Generation Management System (GMS)As an Enterprise Technology Engineer for a Generation Management System (GMS), you will help lead the support andoperations ofanewlyimplementedGMS andits relatedapplicationsandsystems. Aworking knowledgeof maintainingGMS and data integration with ISO and non-ISO Supervisory Control and Data Acquisition (SCADA) systems will be needed. You will provide support and guidance to ensure alignment of technology with business strategy and goals.You will build and sustain expert knowledge of asset management, integration with ERCOT’s system, andmarket operationswiththe potential to expand tootherpowermarkets.Working withbusiness counterparts to identify and define related core business process and standards will be required.Key accountabilitiesThe safety of our people and our customers is our highest priority. The role will advocate and lead in this and promote a culture of security and safety in everything that we do.Work with business to understand ongoing strategy, GMS functional, technical, and support requirements, and to provide or develop technical solutions for meeting their short-term and long-term business goals.Responsible for technical support, design, implementation, and maintenance of all OSI Monarch GMS/SCADA related applications: SCADA, AGC, FEP, ICCP, ECA, PI Historian, etc.Perform Generation and SCADA modeling and testing of various generation or load resources across ERCOT, conduct point-to-point checkouts prior to commissioning.Facilitate outage investigation/restoration of service to production environment, quickly solve all GMS/SCADA application problems in order to minimize outage and adverse business impacts.Ensure business process and requirements are adhered to and market changes (regulatory or other) are safely managed as business growth and expansion occur.Effectively manage team member communication portfolio status with business and, I&E management.Work with bp Cyber Security and NERC Compliance team to support the analysis of NERC CIP impact ratings for GMS, SCADA, and related systems.Support activities involving business, I&E teams, and vendors in the day-to-day operations and maintenance of bp systems (GMS, PI Historian and Bid-to-Bill) including after-hours tier 3 support, and critical project efforts.Ensure maintenance and support activities are in compliance with I&E IT processes and adhere to Service Level Agreements (SLAs).Perform analysis, consult, and develop recommendations to address complex technical issues as they relate to the operation and control of resources, generation or load acting as a resource (LAARs), initially in the ERCOT market.Support the implementation and deployment of replacement, upgrade, or enhanced versions of the GMS applications and platforms.Responsible for continuous improvement of GMS / SCADA systems and customer process.Essential Education and ExperienceBachelor’s or master’s degree in computer science, engineering, information systems or a numerate degree.2+ years of experience supporting a Generation/Energy Management System.Experience with SCADA communication protocols (ICCP, DNP3.0, Modbus, etc.).Familiarity managing Windows Server configurations, security patches and applications.Extensive knowledge of Operational Technology Systems implementation, system integrations, and software development.Strong understanding of ERCOT QSE operations and managing portfolios of generating resources.Able to provide on-call support for production systems outside of normal working hours.Knowledge of North American Electric Reliability Corp. (NERC) and Critical Infrastructure Protection (CIP) requirements and implications for GMS operations.Demonstrable Knowledge in the application of modern Service Delivery methods - Site Reliability Engineering to traditional ITIL and understanding of Product Based delivery.Strong Communications skills and a high ‘EQ’ with the ability to operate across complex business environments and team members up to senior executive level.Desirable CriteriaOSI Monarch with PI Historian systems knowledge.Broader development experience in one or more object-oriented programming languages (e.g. Python, .NET, C/C++, Java)Broad experience contributing and collaborating to assist design, plan, implement, maintain, and document services and solutions.Strong organizational, conflict resolution, and influencing skills.Ability to balance strategic and tactical concerns and apply good judgement to decisions.Adaptability, fluidity, speed, and initiative in unstructured contexts.Ability to rapidly self-teach and a self-motivated desire to learn new technologies.Genuine curiosity and a strong drive to innovate.Unwavering desire to have a high impact on the organization.Why join usAt bp, we support our people to learn and grow in a diverse and exciting environment. We believe that our team is strengthened by diversity. We are committed to fostering an inclusive environment in which everyone is respected and treated fairly.There are many aspects of our employees’ lives that are important, so we offer benefits to enable your work to fit with your life. These benefits can include flexible working options, a generous paid parental leave policy, and excellent retirement benefits, among others!We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.Travel RequirementNegligible travel should be expected with this roleRelocation Assistance:This role is not eligible for relocationRemote Type:This position is a hybrid of office/remote workingSkills:Commercial Acumen, Communication, Data Analysis, Data cleansing and transformation, Data domain knowledge, Data Integration, Data Management, Data Manipulation, Data Sourcing, Data strategy and governance, Data Structures and Algorithms, Data visualization and interpretation, Digital Security, Extract, transform and load, Group Problem SolvingLegal Disclaimer:We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status.Individuals with disabilities may request a reasonable accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an accommodation related to the recruitment process, pleasecontact usto request accommodations.If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Powell's Electrical Division is currently hiring an Electrical Engineer to join the team! We are located in Jacintoport- Houston, TX and are hiring immediately! To develop custom engineered solutions using non-standard applications of Powell standard products to safely and economically meet customer specifications.Posted position does not provide visa sponsorship or relocation.Job Description To create standard products with reference of using customer specifications to design Powell standard products.Design Power Control Rooms using Electrical Standards.Read and interpret customer job specifications.Order materials.Create drawings.Transmit drawings to shop and customer.Interface with sales, customer (with supervisor) and shop.Completed task are check by more senior engineers.Job RequirementsBS Degree in Electrical Engineering, Electrical Technology or related area.Minimum 0-3 years of experience in an Engineering role.Ability to interact on a regular basis with shop personnel.Able to apply product knowledge and technical skills to solve simple application problems independently with minimum supervision.Basic computer skills using Oracle, Word, Excel.Ability to order material electronically.Advanced drafting/CAD skills, AutoCad preferredProficient with electrical design and circuitry.Able to read and interpret electrical symbols, characters, and modify drawings.Able to apply (told by others what it means and which code) NEC, ANSI, and Other as it applies to the day to day activity.Basic understanding of power system and relay applications as applied to products.Ability to apply industry standards as applicable to job and product.Innovative to improve existing products.Able to design one product in the most economical way while achieving quality.Attend in house and outside training sessions.Attend local professional associations.Learn policies and procedures, work instruction, ISO policies, Safety Rules and Regulations, and vendor products.Perform other related duties as assigned.Working & Environmental Conditions The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally there may be some work performed in the field with exposure to construction sites or active customer facilities.It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents.The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus.#LI-BH3About UsIn our 70+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated and assembled to customer specifications!Powered by Innovation - Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story, and let us help you write yours. Hard work pays off in all of our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted.We are an Affirmative Action and Equal Opportunity Employer/Vet/DisabilityIf you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Description At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.Leidos Engineering has an opportunity for an Substation Engineering Manager who will work within Leidos' Power Delivery Services (PDS) division. This position will be part of an established Project Management Office (PMO) that provides consulting services to both public-owned and investor-owned electric utilities. These consulting services provide clients with overall project management tasks in the areas of comprehensive engineering design of electrical transmission and distribution, substation and transmission line projects nationwide.As a Substation Engineering Manager, you can expect to:Responsible for the day-to-day operations of the EPC Solutions protection and control, substation physical, CAD, and SCADA/settings teams: in charge of employee engagement, performance reviews, salary negotiations, interviewing/hiring, work quality, budgets and schedules, mentorship and growth, proposal development, project execution, client interaction, and business development.Prepare and review proposals, technical write-ups and project approach documents for small, medium and large EPC projects. This includes preparation and review of comprehensive project scopes of work and accurate man-hour estimates.Build meaningful relationships with our robust list of long-standing utility clients and construction partners. Function as client Point of Contact (P.O.C) and liaison with clients on project-related issues.Provide technical training and mentorship to junior staff.Understand and apply industry standards, applicable state and federal safety codes, regulatory compliance requirements and construction codes to projects.Provide technical oversight, direction, and support for project teams.Ensure and facilitate project team collaboration and communication across all disciplines and resolve design conflicts as required.Collaborate with our internal team of talent acquisition (TA), human resources (HR), project management organization (PMO), and financial team members to align the objectives of the Orlando team with the objectives of the larger section and division.What Sets You Apart (Background Requirements):Bachelor’s Degree in Engineering from an accredited university, with 8 plus (8+) years of relevant experience in utility substation/P&C engineeringProfessional Engineer (PE) certificationExperience as a substation/P&C engineer leading projects and performing QC reviewsProposal and pricing development creationExpertise with staff training/mentorshipExperience with serving as firm-client liaisonThe ability to travel up to 10% of the timeYou Might Also Have:Project Manager Professional (PMP) certificationActive membership in national engineering societies and work-groups (IEEE, PES, etc.)At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms.At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business.PDSPMPowerDeliveryOriginal Posting Date:2024-05-03While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $101,400.00 - $183,300.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Remote

A Senior Electrical Engineer is responsible for designing, developing, and testing electrical systems and equipment. They oversee projects, provide technical expertise, and ensure compliance with industry standards and regulations. They may also collaborate with other engineers and professionals to solve complex electrical problems, conduct research, and implement innovative solutions. A Senior Electrical Engineer typically has extensive experience in electrical engineering and may supervise and mentor junior engineers in their team.Posted position does not provide visa sponsorship or relocation.Job ResponsibilitiesDesign standard jobs independently.Read and interpret customer job specifications.Develop detailed Bills of material for medium and low voltage switchgearOrder materials.Create drawings.Transmit drawings to shop and customer.Interface with project management, customer and shop.Direct designers in completing wiring diagrams.Check wiring diagrams completed by others.Coordination with Project Management throughout the projectConstant contact with production to answer questions and provide clarification and/or authorization on design changesFollow standard engineering processes and timelines.Work on multiple projects simultaneously and manage workload as per priorityProvide technical assistance as necessary to sales, engineering and inspection teamsAssist with and solve problems of other production engineers on a daily basis.Adhere to policies and procedures, work instruction, ISO policies, Safety Rules and Regulations, and vendor products.Minimum QualificationsBS Degree in Electrical Engineering, Electrical Technology or related areaMinimum 4-8 years of experience in an Engineering role.Advanced drafting/CAD skills.Proficient with electrical design and circuitry.Proficient understanding of power system and relay applications as applied to products.Skills, Abilities & Other Requirements Basic computer skills using Oracle, Word, Excel.Ability to learn/use Primavera P6 to update project status and keep all assigned projects on scheduleAbility to read customer specifications, compare to the quote and provide technical feedback to project management and the customer on differences with minimal supervision.Proficient at job reviews (i.e., acquired knowledge of specs that Powell should take exception to and specs that require special attention; able to accurately interpret customer specs, etc.)Apply technical documents to develop one-lines, three-lines and control schemes for SWGR using AutoCADApply cost competitive techniques to develop the most cost-effective solution for the engineered to order productAble to apply NEC, ANSI/IEEE, and various other codes as it applies to the day-to-day activityThorough understanding of power system application along with relay application and coordinationAble to understand, interpret and troubleshoot customer needs and problemsWorking & Environmental Conditions The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally there may be some work performed in the field with exposure to construction sites or active customer facilities.It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents.The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus.#LI-BH3About UsIn our 70+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated and assembled to customer specifications!Powered by Innovation - Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story, and let us help you write yours. Hard work pays off in all of our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted.We are an Affirmative Action and Equal Opportunity Employer/Vet/DisabilityIf you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Description Leidos is seeking Substation Engineers who who will work alongside engineers and management within Leidos' Power Delivery Services (PDS) division. This position will be part of an established Project Management Office (PMO) that provides consulting services to both public-owned and investor-owned electric utilities. These consulting services provide clients with overall project management tasks in the areas of comprehensive engineering design of electrical transmission and distribution, substation and transmission line projects nationwide.Successful candidates will enjoy a fast-paced, diverse working environment that requires adaptability. You can look forward to collaborative and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including:Project Management Professional (PMP)certificationProfessional Engineer LicenseLeadership training & Management opportunitiesFormal Mentorship programsProfessional Development & Continuing Education ResourcesTechnical Upskilling programsAs a Substation Engineer, you can expect to:Perform Physical Electrical, Protection and Control, SCADA Systems, Station Communications and Station Automation design on small to medium sized utility substation engineering projects with medium complexity.Perform medium to advanced complexity engineering calculations to support engineering design.Assist senior engineers with engineering studies.Prepare project deliverables including but not limited to engineered drawings, technical reports, project-related correspondence and miscellaneous project documentation.Collaborate with other engineering disciplines as required. Should be able to assess the impacts of design changes on other disciplines to pick the best solution.Perform Quality Control reviews on smaller projects.Prepare portions of smaller proposals under the direction of project engineers.Provide drawing counts and manhour estimates for small to medium sized projects.Assist the team with the development of processes and procedures to improve project execution efficiency.Maintain accurate records and files and a high level of organization.Take opportunities to improve technical knowledge and understanding of the work.Develop and provide moderate complexity technical presentations to the team to assist with training and staff development.Assist project engineer with project-related technical support to field personnel during construction.Support Leidos’ goals and represent the company positively and professionally.What Sets you Apart:B.S. or M.S. degree in Electrical Engineering from an accredited university.2+ years of prior relevant experience in utility substation engineering with a B.S. degree OR 1+ years of prior relevant experience in utility substation engineering with a M.S. degreeFamiliarity with electric infrastructure and the theories and principles involved in substation engineering.Experience with engineering programs and software (including SKM, ASPEN, ETAP, CDEGS, or vendor software).Competency in applying basic theories and principals involved in substation engineering.You Might Also Have:Registered Engineer In Training (EIT)Proficiency with Bentley ProjectWise data management system.Understanding of the function and application of major substation electrical and control house equipmentProfessional Attributes that will help you succeed in this role:Keen focus on quality and an appreciation for high quality deliverables.Understanding of the importance of quality and quality control in power/consulting industry.Strong attention to detailsAbility to meet deadlines under high pressure situations.At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms.The opportunities at Leidosare boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. Apply today!PDSPMPowerDeliveryOriginal Posting Date:2024-05-07While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $65,000.00 - $117,500.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Remote

A Senior Electrical Engineer II is responsible for designing and developing electrical systems and equipment. They oversee projects, provide technical expertise, and ensure compliance with industry standards and regulations. They may also collaborate with other engineers and professionals to solve complex electrical problems, conduct research, and implement innovative solutions. A Senior Electrical Engineer typically has extensive experience in electrical engineering and may supervise and mentor junior engineers in their team.Posted position does not provide visa sponsorship or relocation.Job Responsibilities Design standard jobs independently.Read and interpret customer job specifications.Develop detailed Bills of material for medium and low voltage switchgearOrder materials.Create drawings.Transmit drawings to shop and customer.Interface with project management, customer and shop.Direct designers in completing wiring diagrams.Check wiring diagrams completed by others.Coordination with Project Management throughout the projectConstant contact with production to answer questions and provide clarification and/or authorization on design changesFollow standard engineering processes and timelines.Work on multiple projects simultaneously and manage workload as per priorityProvide technical assistance as necessary to sales, engineering and inspection teamsAssist with and solve problems of other production engineers on a daily basis.Adhere to policies and procedures, work instruction, ISO policies, Safety Rules and Regulations, and vendor products.Minimum QualificationsBS Degree in Electrical Engineering, Electrical Technology or related areaMinimum 4-8 years of experience in an Engineering role.Advanced drafting/CAD skills.Advanced proficiency with electrical design and circuitry.Advanced proficiency in understanding of power system and relay applications as applied to products.Skills, Abilities, & Other Requirements Basic computer skills using Oracle, Word, Excel.Ability to learn/use Primavera P6 to update project status and keep all assigned projects on scheduleAbility to read customer specifications, compare to the quote and provide technical feedback to project management and the customer on differences with minimal supervision.Proficient at job reviews (i.e., acquired knowledge of specs that Powell should take exception to and specs that require special attention; able to accurately interpret customer specs, etc.)Apply technical documents to develop one-lines, three-lines and control schemes for SWGR and MCC using AutoCADApply cost competitive techniques to develop the most cost-effective solution for the engineered to order productAble to apply NEC, ANSI/IEEE, and various other codes as it applies to the day-to-day activityThorough understanding of power system application along with relay application and coordinationAble to understand, interpret and troubleshoot customer needs and problemsWorking & Environmental Conditions The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally there may be some work performed in the field with exposure to construction sites or active customer facilities.It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents.The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus.#LI-BH3About UsIn our 70+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated and assembled to customer specifications!Powered by Innovation - Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story, and let us help you write yours. Hard work pays off in all of our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted.We are an Affirmative Action and Equal Opportunity Employer/Vet/DisabilityIf you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Description Looking for an opportunity to make an impact At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.If this sounds like the kind of environment where you can thrive, keep reading!We are seeking a Substation Electrical Engineer who will work as a member of a dynamic team within our Commercial Energy Services Operation organization; specifically, our Power Delivery division: an established group of electric utility engineering consultants that solve challenging substation engineering problems for our utility clients Nation-wide.Your greatest work is ahead!The MissionLeidos Engineering is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Power Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click here! Are you ready to make an impact Begin your journey of a flourishing and meaningful career. Share your resume with us today!The Challenge:Perform Physical Electrical, Protection and Control, SCADA Systems, Station Communications and Station Automation design on small to medium sized utility substation engineering projects with medium complexity.Perform medium to advanced complexity engineering calculations to support engineering design.Assist senior engineers with engineering studies.Prepare project deliverables including but not limited to engineered drawings, technical reports, project-related correspondence and miscellaneous project documentation.Collaborate with other engineering disciplines as required. Should be able to assess the impacts of design changes on other disciplines to pick the best solution.Perform Quality Control reviews on smaller projects.Prepare portions of smaller proposals under the direction of project engineers.Provide drawing counts and manhour estimates for small to medium sized projects.Assist the team with the development of processes and procedures to improve project execution efficiency.Maintain accurate records and files and a high level of organization.Take opportunities to improve technical knowledge and understanding of the work.Develop and provide moderate complexity technical presentations to the team to assist with training and staff development.Assist project engineer with project-related technical support to field personnel during construction.Support Leidos’ goals and represent the company positively and professionally.What Sets you Apart:B.S. or M.S. degree in Electrical Engineering from an accredited university.2 – 4 years of prior relevant experience in utility substation engineering with a B.S. degree1– 2 years of prior relevant experience in utility substation engineering with a M.S. degreeYou Might Also Have:Registered Engineer In Training (EIT)Active membership in national engineering societies (IEEE, PES, etc.)Proficiency with Bentley ProjectWise data management system.Professional Attributes:Solid understanding of the function and application of major substation electrical and control house equipmentCompetence in applying basic theories and principals involved in substation engineering.Keen focus on quality and an appreciation for high quality deliverables.Understanding of the importance of quality and quality control in our industry.Strong attention to detailsAbility to meet deadlines under high pressure situations.PDSSUBSTATIONPowerDeliveryOriginal Posting Date:2024-03-20While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $65,000.00 - $117,500.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

JOB DESCRIPTIONA Senior Applications Engineer is responsible for assessing the costs and resources required for a project or service. They analyze project specifications, review drawings and data sheets, and collaborate with various stakeholders to determine material, labor, and equipment needs. Estimators also research market prices, obtain quotes from suppliers and subcontractors, and prepare detailed cost estimates and proposals. Their role is crucial in ensuring accurate budgeting and pricing for projects in construction, manufacturing, engineering, and other industries.Posted position does not provide visa sponsorship or relocationReports toTechnical Sales Manager of PADAS A PAD SENIOR AUTOMATION APPLICATIONS ENGINEER YOU WILL: Core Responsibilites Independently review customer supplied specifications to assess feasibility of Powell manufacture or supplyRead and interpret electrical drawings to include single-lines, three-lines, elevations, control schematics, site plans and electrical enclosure layoutsGenerate accurate proposals based on the review and interpretation of customer-supplied documentation Recognize and effectively communicate application concerns prior to development of proposalTranslate conceptual customer designs into a meaningful proposalOptimize the proposed solution to best benefit Powell and our customerWrite effective comments to help define Powell's offeringAct as technical resource for Powell SalesAssist Powell Sales with internal and external technical discussions and solutionsPerform competitive evaluation of sub vendor proposals used to complete the overall Powell offeringAssess risk associated with sub-vendor offering Interact with other Powell divisions to develop cross business solutions Requires minimal supervisionProject responsibilities may be average to complex May be selected to lead a project requiring contribution from multiple Application Engineers Secondary Responsibilities (performed but not regularly):Participate in sales and marketing activities to include client meetings and conferencesParticipate in executing cost out initiatives in conjunction with Engineering and OperationsPerform analytical or competitive market studies as requiredContribute to new and existing product specificationsKey FunctionsPrepare detailed, accurate and cost competitive proposals - 90%Participate in external customer facing activities - 10%Minimum QualificationsB.S. in Electrical Engineering or relevant discipline4+ years of experience in electrical equipment estimating, or related fieldSkills, Abilities & Other Requirements Build and maintain a working knowledge of electrical theory and applicable industry standards including IEEE/ANSI, NEC, IBC and NFPA.Applied knowledge of low & medium voltage distribution equipment ratings and designApplied knowledge of DC systems, UPS systems, HVAC and pressurizationApplied knowledge of interconnect, conduit and cable schedulesAbility to read and interpret electrical specificationsAbility to read and interpret electrical drawings to include single lines, three lines, schematics and wiring diagramsExcellent verbal and written communication skillsCustomer OrientedAble to manage multiple prioritiesPrioritizes and plans work activities; uses time efficiently; plans for additional resources; sets goals and objectives; develops realistic action plans in order to meet deadlinesProblem Solving: Gathers and analyzes information using inquisitive mind, using strong logical, methodical and systematic skillsWork independently with little or no supervisionAbility to learn new skills and assume new responsibilitiesVisio / Auto CAD / InventorMicrosoft Office SuiteWorking & Enironmental ConditionsWorking ConditionsTemperature controlled working environment. Some outside activities may be required.This position may travel out-of-town to attend training and meetings.Typical office environment: may experience minor discomfort from extensive use of a computer display and keyboard; travel between buildings on campus and between campuses.Physical RequirementsMaintaining body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs.Sitting, standing and walking for long periods of time.Typing, punching or applying pressure to an object with fingers and palm.#LI-BH3About UsIn our 70+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated and assembled to customer specifications!Powered by Innovation - Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story, and let us help you write yours. Hard work pays off in all of our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted.We are an Affirmative Action and Equal Opportunity Employer/Vet/DisabilityIf you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Description Ready for a rewarding career opportunity Unleash your potentialat Leidos, where we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer’s success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.If this sounds like an environment where you can thrive, keep reading!Are you a skilled Substation Project Engineer looking for your next big opportunity Leidos Engineering has just the role for you! We are seeking a talented engineer to join our team in Houston, TX, working alongside lead engineers and account managers to support a range of clients within our Power Delivery Services. As a key member of our team, you'll have the chance to showcase your skills and expertise while helping us deliver exceptional service and results to our valued clients. If you're up for the challenge, we want to hear from you. Take the first step towards an exciting new career with Leidos – apply today! Your greatest work is ahead!The Mission Leidos Civil Group helps modernize infrastructure, systems, and security. We are a trusted partner to both government and highly-regulated commercial customers looking for transformative solutions in mission IT, security, software, engineering, and operations. We work with our customers, including the FAA, DOE, NASA, National Science Foundation, Transportation Security Administration, Custom and Border Protection, airports, and electric utilities to make the world safer, healthier, and more efficient. Our customers take on the toughest challenges out there and, at times, need a helping hand from specialists in their fields. We combine our scale as a Fortune 500 company with the deep technical knowledge of our core capabilities and the expertise of our talented and diverse workforce to deliver mission-centric innovations. For each of these core capabilities, we have developed proven, repeatable processes that help us deliver agile, cost-effective solutions to foster a better world.To explore and learn more, click here!Are you ready to join a team dedicated to a mission Begin your journey of a flourishing and meaningful career, share your resume with us today!Your Main Objective:Lead and/or perform Substation Physical Electrical engineering design (including general arrangement, electrical plans and sections, grounding plan and details, raceway plan and details, shielding plan and details, lighting plan, and details, etc.) at HV and EHV voltage levels while adhering to prevailing standards, practices, procedures, and project/program requirements.Lead and/or perform Protection and Control engineering design (including relaying one-lines, AC schematics, DC schematics, metering, SCADA systems, station communications, station automation, station security, etc.) at HV and EHV voltage levels while adhering to prevailing standards, practices, procedures, and project/program requirements.Lead and/or conduct engineering studies and calculations (including bus spans, shielding, lighting, conduit fill, AC/DC loading and system design, etc.).Understand and apply industry standards, applicable state and federal safety codes, regulatory compliance requirements, and construction codes to projects.Create equipment, material, construction, and testing and commissioning specifications.Perform quality control (QC) reviews and lead QC review meetings on applicable engineering deliverables produced by junior staff, peers, and remote offices on small, medium, and large projects while adhering to the PDS quality management standard.Provide technical oversight, direction, and support for project teams.Assure proper documentation of project technical data.Ensure and facilitate project team collaboration and communication across all disciplines and resolve design conflicts as needed.Coordinate with project managers to successfully deliver projects to our clients.Function as client Point of Contact (P.O.C) and work directly with clients on project-related issues.Direct and/or participate in client meetings and job-site visits to collect and deliver design and engineering information.Identify and resolve project-related issues while proactively communicating and collaborating with the client.Perform evaluations of existing facilities to propose upgrades and replacements and present findings and recommendations to our clients.Complete conceptual design (one-line and general layout) to support project planning.Prepare and review proposals, technical write-ups, and project approach documents for small, medium, and large projects. This includes preparing and reviewing comprehensive project scopes of work and accurate man-hour estimates.Create project schedules using common software (MS Project, Primavera, etc.) to support proposal development.Present and justify proposals, estimates, and technical write-ups to management for small, medium, and large projects.Provide technical training to junior staff by preparing presentations and workshops and conducting one-on-one meetings to assist with their technical growth.Provide professional mentorship while setting and maintaining a positive professional example for the team and junior staff.Support Leidos’ company goals and represent the company positively and professionally.What Sets You Apart:Bachelor’s degree in electrical engineering from an accredited university with four (4) + years of prior relevant experience in utility substation engineering.Prior experience as a substation lead engineer performing QC reviews and staff training/mentorship.Experience with serving as firm-client liaison in a support and lead engineering role.Demonstrate advocacy of Quality Assurance and Control in the field of substation engineering.Comprehensive understanding of the utility grid (power generation, transmission, and distribution) system and the theories and principles involved in substation engineering.Comprehensive understanding of industry standards (including NEC, NESC, NEMA, IEEE/ANSI) and their application to projects.Competence in researching engineering and design issues, evaluating alternatives, making sound recommendations, and preparing and presenting recommendations.Ability to meet deadlines under high-pressure situations.High level of computer competency/Proficiency with using MS Office applications.Team player who can work effectively in a team environment with an ability to deal with and lead a variety of individuals from various socio-economic, cultural, and ethnic backgrounds.Strong written and oral communication skills.Strong organizational skills.Understand the "big picture" approach and the importance of "Attention To Detail."Ability to travel up to 15% of the time.You Might Also Have: Experience with substation physical and protection and control design.Experience with engineering programs and software (including SKM, ASPEN, ETAP, CDEGS, or vendor software).Active membership in national engineering societies and work groups (IEEE, PES, etc.)Registered Professional Engineer (PE).Construction support experience.At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that allow them to thrive professionally and personally. For us, helping you grow your career is good business. We look forward to learning more about you – apply today!Original Posting Date:2024-03-20While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $81,250.00 - $146,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Do you like to develop awesome products that make a real difference to our digital world Come and join Powell's IOT product development team and you will be there from the start and see your groundbreaking product come to life with the customers who asked for it. We're looking for an experienced Electronic Development Engineer to join our team.Powell Industries, a US manufacturer of low- and medium-voltage electrical & electronic equipment for commercial, industrial, and utility systems. Powell's products include class-leading vacuum circuit breakers, monitoring, sensing and control electronics, communications and software systems, switchgear, motor control, and safety-focused enclosure systems.Powell's 75-year leadership in vacuum switching technology and arc-flash safety is widely known and in use globally, while being designed and manufactured in multiple facilities in the US, Canada and the UK. Our R&D facilities located at one of our three Houston-area manufacturing facilities feature electrical, mechanical and electronic prototyping facilities and UL-certified high voltage and high current labs, where you will be able to model and validate the performance of your designs in real time.Powell is hiring an experienced Electronic Development Engineer for our Research and Development department. The role of the engineer is the development, validation and technical support of industrial electronic products from concept to full production, as well as continuation engineering on existing product lines. This role will include liaison with manufacturers, clients and internal production and engineering teams. Posted position does not allow for sponsorship or relocation.Position SummaryResponsible for the development, validation and technical support of industrial electronic products from concept to formal release into customer facing applications. This will include liaison with manufacturers, clients and internal production and engineering teams where necessary.Essential ResponsibilitiesFrom approved product requirements, create product family architecture for use in developing detailed design specificationsTake ownership of specification creation once requirements and product family architecture are approvedFrom defined specifications, formulate and execute a plan for the design, development and validation of industrial electronic products for use within switchgear environments. This will include new products and enhancements to existing products.Undertake and lead design reviews for both peer and subordinate engineersUndertake and/or oversee validation and certification activities associated with the development of industrial electronic hardware.Undertake documentation reviews with peer and subordinate engineers. Provide direct feedback on the quality, detail and accuracy of reviewed documentationGenerate and maintain detailed technical documents as required during the course of product development.With the R&D Manager agree a plan for the work allocated and be responsible for the execution, accuracy and content of the defined work.Undertake new product introduction (NPI) activities associated with initiating the manufacture of a developed product. This will include liaising with the manufacturer and taking responsibility for all non-commercial issues Be responsible for the specification and realization of product manufacturing validation regimes.Provide support for existing electronic products, as required by both the company and its customers. Duties will include training, technical consulting and application of technical knowledge.Mentor junior engineers in the development of their technical and engineering skillsEmbrace the company's intern program, using this to identify, engage and secure high caliber interns with a view to them becoming future company employeesCollaboration within the department and cross functional teams to deliver the electronic products as required.Ensure that company procedures and standards are adhered to.To maintain and enhance one's knowledge of the latest technology to sustain and improve the company's products. This will include undertaking research to identify new product possibilities and documenting these as future product conceptsTo carry out any other reasonable duties, as assigned, which are within the capabilities of the job holderQualificationsBS Degree in Electrical and Electronics Engineering (Advanced degree (MS, PhD) preferred)Minimum 5 years' experience in industrial electronic product development roleProject management and organizational skills. Prior use of project management software tools expectedStrong verbal and written communication skills with specific technical document writing and presentation experience. Ability to document from reader's perspective is essentialComplex analytical and problem solving ability. Ability to prioritize and manage time effectively. (Self-motivated and self-managing).Participation in a professional society desired.Extensive knowledge with demonstrable experience of the following is required:Microcontrollers applied in embedded industrial products.Analogue electronics signal processing.Power supply design & power electronics.Brushless motor controller design / development#LI-CABAbout UsIn our 70+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated and assembled to customer specifications!Powered by Innovation - Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story, and let us help you write yours. Hard work pays off in all of our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted.We are an Affirmative Action and Equal Opportunity Employer/Vet/DisabilityIf you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Description Looking for an opportunity to make an impact At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.Your greatest work is ahead!We are looking for a Substation Protection & Control Engineer to join our team. As an Career Protection & Control Engineer, candidates will have the opportunity to design substation protection and control projects for electric utilities at voltages from 12kV up to 500kV. This is an exciting and growing field in the power systems industry and allows candidates to get exposure to how the power generation such as that of renewable energy ties into the electric system. Candidates will be expected to use knowledge of digital logic design, AC and DC circuits to design substation electrical projects.Remote: - support capacity for candidates in living the Dallas, and Austin, TX client servicing areas.Hybrid: - support capacity for candidates in living the Houston, TX client servicing areas. (2 -4) days a week in office!Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: Engineer in Training Certificate (EIT).Professional Engineer License (PE).Project Management Professional (PMP).Technical & Non-Technical Training Opportunities.Leadership Opportunities.Mentorship & Training Opportunities.Opportunity to Lead, Grow, and Inspire a Dynamic TeamIn this role, you can also expect to gain experience in the following:Interfacing with Local Clients.Partnering with a Variety of Utility Clients Nationwide.Working with different types of projects ranging from distribution to transmission level voltages.Electrical Power Calculations.Interactions with Other Disciplines (Substation, Telecom, and Civil Structural, etc).Are you ready to make an impact Begin your journey of a flourishing and meaningful career, share your resume with us today!The Challenge: Relay One Line Design.Three Line AC Schematic Design.DC Protection Schematic Design.Panel Layout and Wiring Design.Develop Bill of Materials Based on Design Criteria.Quality Control Checks on completed design.Prepare project deliverables including but not limited to engineered drawings, technical reports, correspondence and miscellaneous project documentation.Collaborate with other engineering disciplines as required. Should be able to assess the impacts of design changes on other disciplines to pick the best solution. Foster constructive communication between disciplinesComplete Project Lifecycle Support from Scoping to Final Design and Implementation.Provide Construction Support.Working with Client and National Standards to Implement Design.Working with a Designer/Drafter to Create the Required Drawings for Each Project.Expected to attend site visit at customer locationSuccessful candidates must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget. This position will be a member of a design team comprised of engineers, designers, and CAD technicians and will work with client standards to implement design.What Sets You Apart:Mid-Level: Bachelor’s degree in electrical engineering, or related degree with two (2+) or more years of Substation protection control design and/or field testing/commissioning experience.Senior-Level: Bachelor’s degree in electrical engineering, or related degree with four (4+) or more years of Substation protection control design and/or field testing/commissioning experience.Lead-Level: Bachelor’s degree in electrical engineering, or related degree with four (8+) or more years of Substation protection control design and/or field testing/commissioning experience.Experience in executing substation protection and control projects.Demonstrate Excellent communication skills and ability to interact with the internal team and clients to meet project needs.Ability to read and design substation protection and control drawings such as one-line drawings, three-line drawings, AC/DC schematic drawings and wiring design.Ability to meet deadlines under pressure situations.Collaborator and leader who can work effectively in team environment.Self-starter who works independently with minimal direction.Strong analytical skills and proven problem solver in both team and independent environments.High level of computer competency.Willingness to travel to project and/or client sites.Proactive communication with strong written and oral communication skillsYou Might Also have:Engineer Intern (“EI” or “EIT”) professional certification.Professional Engineer (“PE”) License.Experience performing quality control checks on small substation protection and control design projects.Experience working on CAD tools such as SDS AutoCAD Electrical.Proficiency with Bentley ProjectWise data management system.Master’s degree in related field.Field testing/commissioning experience.WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click here!At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference.PowerDeliveryPDSSUBSTATIONOriginal Posting Date:2024-03-14While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $81,250.00 - $146,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Job DescriptionPowell Industries, a US manufacturer of low- and medium-voltage electrical equipment for commercial, industrial, and utility systems is seeking highly motivated candidates for a Senior R&D Engineer II as part of an expansion of our Research and Development Department. In this role, you will work with a team of experienced professionals to develop groundbreaking new technologies and product designs, taking initial concepts through to production launch.Powell's products include class-leading vacuum circuit breakers, monitoring, sensing and control electronics, communications and software systems, switchgear, motor control, and safety-focused enclosure systems. Powell's 75-year leadership in vacuum switching technology and arc-flash safety is widely known and in use globally, while being designed and manufactured in multiple facilities in the US, Canada and the UK. One of our three Houston-area manufacturing facilities also includes a prototyping shop and UL-certified high voltage and high current lab, where you will be able to model and validate the performance of your designs in real time.ExpectationsPropose concepts and develop complex level designs for both existing and new product lines. Deliver innovative designs that meet profit, cost, quality, and time-to-market metrics.Determine and specify design parameters, validate according to standards, and prepare documentation. Investigate patentable concepts.Oversee validation and testing of components/system or assemblies in the development and validation process.Develop test plans based on D/PFMEA, project specifications, industry standards, and reliability and validation requirements for both internal and external laboratories.Direct laboratory testing, analysis of data, and create corrective action plans.Ensure project designs meet requirements of specification and standards while promoting error-proof assembly. Prepare written documentation of processes, material requirements, test results, and project activity as required.Understand and enforce regulatory document requirements.Interface with outside vendors, consultants, and customers.Work with third-party vendors to develop high-quality, lowest-cost design options.Continuously improve engineering processes including DFX, project and product costs, quality, and project lead times.Actively collaborate and provide Engineering support to Sales/Product Management and Manufacturing on new products and processes.Actively participate in and facilitate Product Development Process.May perform other duties as assigned.Job RequirementsBachelor's Degree in Electrical, Mechanical Engineering or Power Engineering. Advanced degree preferred.8+ years of progressive experience in Engineering design and/or development on highly technical and innovative projects.Able to prioritize and manage time effectively. (Self-motivated and self-managing).Working knowledge of electromechanical product design and development.Working knowledge of switchgear and/or controls.Experience with medium/high voltage electrical power systems.Demonstrated complex analytical and problem solving ability.Working knowledge of CAD and/or analysis tools. Working knowledge of regulatory standards (ANSI, IEEE, and IEC).Experience creating and reviewing DFMEA and PFMEA process and documents.Experience developing projects within a Stage-Gate Process.Participation in industry organizations (associations, standards committees, etc.) to stay informed of and to influence industry activities a plus.Proven experience with computers; Microsoft Office, Microsoft Project, or equivalents.Strong technical knowledge in the following categories per discipline: Electrical: Current and Voltage Sensors, Power Systems.Mechanical: Molded Components or Mechanism Design, castings, and metal fabricated parts.Demonstrated ability to write/edit technical documents; test reports, engineering standards, industry technical papers.Demonstrated verbal and written communication skills.Ability to quickly respond to strategic and tactical changes.Working EnvironmentThe employee typically performs duties in a normal office environment. There will be some work in our manufacturing shop facilities and electrical test lab.#LI-CABAbout UsIn our 70+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated and assembled to customer specifications!Powered by Innovation - Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story, and let us help you write yours. Hard work pays off in all of our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted.We are an Affirmative Action and Equal Opportunity Employer/Vet/DisabilityIf you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Description Looking for an opportunity to make an impact At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.Your greatest work is ahead!We are looking for a Substation Protection & Control Engineer to join our team. As an Career Protection & Control Engineer, candidates will have the opportunity to design substation protection and control projects for electric utilities at voltages from 12kV up to 500kV. This is an exciting and growing field in the power systems industry and allows candidates to get exposure to how the power generation such as that of renewable energy ties into the electric system. Candidates will be expected to use knowledge of digital logic design, AC and DC circuits to design substation electrical projects.Remote: - support capacity for candidates in living the Dallas, and Austin, TX client servicing areas.Hybrid: - support capacity for candidates in living the Houston, TX client servicing areas. (2 -4) days a week in office!Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: Engineer in Training Certificate (EIT).Professional Engineer License (PE).Project Management Professional (PMP).Technical & Non-Technical Training Opportunities.Leadership Opportunities.Mentorship & Training Opportunities.Opportunity to Lead, Grow, and Inspire a Dynamic TeamIn this role, you can also expect to gain experience in the following:Interfacing with Local Clients.Partnering with a Variety of Utility Clients Nationwide.Working with different types of projects ranging from distribution to transmission level voltages.Electrical Power Calculations.Interactions with Other Disciplines (Substation, Telecom, and Civil Structural, etc).Are you ready to make an impact Begin your journey of a flourishing and meaningful career, share your resume with us today!The Challenge: Relay One Line Design.Three Line AC Schematic Design.DC Protection Schematic Design.Panel Layout and Wiring Design.Develop Bill of Materials Based on Design Criteria.Quality Control Checks on completed design.Prepare project deliverables including but not limited to engineered drawings, technical reports, correspondence and miscellaneous project documentation.Collaborate with other engineering disciplines as required. Should be able to assess the impacts of design changes on other disciplines to pick the best solution. Foster constructive communication between disciplinesComplete Project Lifecycle Support from Scoping to Final Design and Implementation.Provide Construction Support.Working with Client and National Standards to Implement Design.Working with a Designer/Drafter to Create the Required Drawings for Each Project.Expected to attend site visit at customer locationSuccessful candidates must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget. This position will be a member of a design team comprised of engineers, designers, and CAD technicians and will work with client standards to implement design.What Sets You Apart:Mid-Level: Bachelor’s degree in electrical engineering, or related degree with two (2+) or more years of Substation protection control design and/or field testing/commissioning experience.Senior-Level: Bachelor’s degree in electrical engineering, or related degree with four (4+) or more years of Substation protection control design and/or field testing/commissioning experience.Lead-Level: Bachelor’s degree in electrical engineering, or related degree with four (8+) or more years of Substation protection control design and/or field testing/commissioning experience.Experience in executing substation protection and control projects.Demonstrate Excellent communication skills and ability to interact with the internal team and clients to meet project needs.Ability to read and design substation protection and control drawings such as one-line drawings, three-line drawings, AC/DC schematic drawings and wiring design.Ability to meet deadlines under pressure situations.Collaborator and leader who can work effectively in team environment.Self-starter who works independently with minimal direction.Strong analytical skills and proven problem solver in both team and independent environments.High level of computer competency.Willingness to travel to project and/or client sites.Proactive communication with strong written and oral communication skillsYou Might Also have:Engineer Intern (“EI” or “EIT”) professional certification.Professional Engineer (“PE”) License.Experience performing quality control checks on small substation protection and control design projects.Experience working on CAD tools such as SDS AutoCAD Electrical.Proficiency with Bentley ProjectWise data management system.Master’s degree in related field.Field testing/commissioning experience.WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click here!At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference.PowerDeliveryPDSSUBSTATIONOriginal Posting Date:2024-03-14While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $81,250.00 - $146,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Looking for an opportunity to make an impact At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.Your greatest work is ahead!We are looking for a Substation Physical Engineer to join our team. As an Career Substation Physical Engineer, candidates will have the opportunity to work on projects for electric utilities at voltages from 12kV up to 500kV. This is an exciting and growing field in the power systems industry and allows candidates to get exposure to how the power generation such as that of renewable energy ties into the electric system. Candidates will be expected to use knowledge of digital logic design, AC and DC circuits to design substation electrical projects.Remote: - support capacity for candidates in living the Dallas, and Austin, TX client servicing areas.Hybrid: - support capacity for candidates in living the Houston, TX client servicing areas. (2 -4) days a week in office!Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: Engineer in Training Certificate (EIT).Professional Engineer License (PE).Project Management Professional (PMP).Technical & Non-Technical Training Opportunities.Leadership Opportunities.Mentorship & Training Opportunities.Opportunity to Lead, Grow, and Inspire a Dynamic TeamAre you ready to make an impact Begin your journey of a flourishing and meaningful career, share your resume with us today!The Challenge: Experience in executing substation physical projectsExcellent communication skills and ability to interact with the internal team and clients to meet project needs.Performing quality control checks on substation physical design projects.Expected to read and design substation physical drawings such as operation one-line drawings, electrical plan and section drawings, foundation layouts, grounding layouts and details, Conduit layouts and details.Create and check bill of materials for substation physicalPrepare project deliverables including but not limited to engineered drawings, technical reports, correspondence and miscellaneous project documentationCollaborate with other engineering disciplines as required. Should be able to assess the impacts of design changes on other disciplines to pick the best solution. Foster constructive communication between disciplinesExpected to attend site visit at customer locationAssist the team with the development of processes and procedures to improve project execution efficiency.Working with Client and National Standards to Implement Design.Successful candidates must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget.This position will be a member of a design team comprised of engineers, designers, and CAD technicians and will work with client standards to implement design.What Sets You Apart:Mid-Level: Bachelor’s degree in electrical engineering, or related degree with two (2+) or more years of related substation physical design experience.Senior-Level: Bachelor’s degree in electrical engineering, or related degree with four (4+) or more years of related substation physical design experience.Lead- Level: Bachelor’s degree in electrical engineering, or related degree with four (8+) or more years of related substation physical design experience.Experience with grounding studies/lightning protection and lighting studies.Demonstrate Excellent communication skills and ability to interact with the internal team and clients to meet project needs.Ability to meet deadlines under pressure situations.Collaborator and leader who can work effectively in team environment.Self-starter who works independently with minimal direction.Strong analytical skills and proven problem solver in both team and independent environments.High level of computer competency.Willingness to travel to project and/or client sites.You Might Also have:US Citizen and able to pass a DOE BackgroundEngineer Intern (“EI” or “EIT”) professional certification.Professional Engineer (“PE”) License.Working knowledge of protection and control designExperience with bus calculationExperience with WinIGS or CDEGSMaster’s degree in related field.WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click here!At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference.PowerDeliveryPDSSUBSTATIONOriginal Posting Date:2024-03-14While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $81,250.00 - $146,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.