PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

AutoReqId: 19075BR Pay Class: Salaried Exempt Minimum Pay Rate: $102,300.00 Maximum Pay Rate: $140,662.50 Department: Technical Line of Business: Corporate Administration (SSC, IT, Employee Services, Etc.) Position Type: Full-Time Job Posting: THE ROLE AND THE COMPANY Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes way beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America, previously known as Lehigh Hanson, operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. Heidelberg Materials seeks to future proof its cement operations with increased digitization and operational capability. The overarching goal is to centralize operations, and to achieve operational excellence. For this purpose, it is establishing the Heidelberg Materials Remote Optimization Center (HROC) in its headquarters in Irving, Texas. As an HROC Systems Engineer, you will be responsible for providing technical support and expertise to multiple cement plants within a designated region. Based in a central location remote to the plants, you will collaborate closely with plant teams to optimize process performance, troubleshoot issues, and drive continuous improvement initiatives across the region. Occasional travel to the plant sites supported will be required. What You’ll Get to Do Control System Support: Provide technical support for the operation, maintenance, and troubleshooting of control systems at multiple cement plant sites. Collaborate with plant teams and process engineers to identify and resolve control system issues, ensuring minimal disruption to plant operations. Ensure compliance with safety and regulatory standards.System Optimization: Collaborate with plant teams and process engineers to analyze control system performance data, identify opportunities for optimization, and implement improvement strategies. Optimize control algorithms, tuning parameters, and control loops to enhance process stability, efficiency, and product quality.Expert System Application Maintenance and Optimization: Work in coordination with plant teams and process engineers to maintain and optimize expert system applications in crushing, milling, pyro-processing, environmental compliance, and quality control applications to drive high utilization and value.Data Acquisition/Historian Support: Provide technical support for the maintenance and troubleshooting of company’s data historian. Add tags and configure connections to new systems, build customer reports, manage user accounts, and assist process engineers with development of trends and other historian tools.System Upgrades and Integration: Support control system upgrades, migrations, and integration projects. Collaborate with cross-functional teams, including project managers, IT, process engineers, and vendors, to plan and execute system upgrades, implement new functionalities, and ensure seamless integration with existing plant systems.Maintenance and Documentation: Develop and implement preventive maintenance plans for control systems, including routine inspections, calibrations, and software updates. Maintain accurate and up-to-date documentation of control system configurations, interlock diagrams, network diagrams, business continuity plans and standard operating procedures. Ensure compliance with change management processes.Training and Knowledge Transfer: Provide training and technical guidance to operators and process engineers on control system operation, troubleshooting techniques, and best practices. Foster a culture of knowledge sharing and continuous learning by conducting workshops, developing training materials, and sharing expertise with the plant teams.Cybersecurity: Collaborate with IT teams and cybersecurity experts to implement robust security measures and protocols to protect process network systems from cyber threats. Monitor and assess system vulnerabilities, recommend, and implement security enhancements, and ensure compliance with cybersecurity standards. Essential Experience and Skills Bachelor's degree in Electrical Engineering, Control Systems Engineering, or a related field.Previous experience in control systems engineering, preferably in the cement or heavy industrial sector.Strong knowledge of control system principles, distributed control systems (DCS), programmable logic controllers (PLC), human-machine interfaces (HMI), and process automation.Proficiency in programming languages such as ladder logic, structured text, or function block. Working knowledge of multiple control systems is preferred.Experience with control system hardware, networking, and communication protocols.Experience configuring and maintaining VMware virtual environments.Experience with OPC DA servers, clients and tunnellers.Familiarity with cybersecurity principles and practices for control systems.Familiarity with digitalization, artificial intelligence, data historians, and expert systemsFamiliarity with power metering, instrumentation, gas analyzers, control devices, motor control centers, switchgear and control panel design and engineering.Excellent problem-solving and analytical skills, with the ability to diagnose and resolve complex control system issues. What We Have to Offer: Competitive base salary and participation in our annual incentive planCompetitive benefits program401k retirement savings plan with an automatic company contribution as well as matching contributions No Search Firms please. Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Employee Type:Full timeLocation:TX CarrolltonJob Type:Engineering ManufacturingJob Posting Title:Controls EngineerAbout Us:TreeHouse Foods (NYSE: THS) is a leading manufacturer of private label packaged foods and beverages, operating a network of production facilities across the United States and Canada. At TreeHouse Foods, our commitment to excellence extends beyond our products and revolves around our people. We are investing in talent and creating a performance-based culture where employees can do their best work, directly impacting our mission to make high quality, affordable food for our customers, communities and families. We hope you will consider joining the team and being part of our future.What You Gain:Competitive compensation and benefits programEnrollment in our wellness and employee assistance programsPaid holidays, vacation, and other competitive paid time off opportunitiesAn inclusive working environment where you can build meaningful work relationships with a diverse group of peopleLeaders who are invested in supporting your career growthOpportunities to be recognized for outstanding contributions to yourteam through our employee recognition programsJob Description:About the Role:Reporting to the Sr Manager Technical Operations, this position plans, performs and coordinates electrical, controls, and mechanical repairs to plant machinery, equipment, and facilities. Responds to plant control needs and electrical issues. Performs PLC troubleshooting and programming as needed. Upgrades machine controls and safeties following NEC and State codes.Upgrade all machine controls to current PLCs or PACs and machine safeties to CAT 3 level. Coordinate annual thermal scans & circuit breaker testing.Provides annual electrical safety training to maintenance personnel to include arc flash, qualified workers, and LOTO verification.Provided PLC and electrical troubleshooting assistance to maintenance department. Manage changes to the electrical system to include P.M.s, single line diagrams and arc flash surveys.Provides technical training to maintenance department in areas such as relay logic, 3 phase power, VFD’s & PLC troubleshooting.Follows and enforces standards for food safety and food quality production reflected in SQF as well as the regulations of major vendors and governmental agencies such as OSHA, FDA and EPA.Effectively communicate with coworkers and outside contractors. Be discreet in the use of company confidential information. Perform other duties as required.Important Details: Predominately an onsite role Mon-Friday with some night and weekend requirements with remote availability.About You:You’ll fit right in if you have:Bachelor’s degree in a technical or related field (Preferred)Technical school, experience and aptitude considered in lieu of degree. (Required)Minimum of 5 years’ experience with food manufacturing process controls. (Required)Experience with industrial PLC’s, preferably Allen Bradley, and electrical systemsThe ability to work overtime and weekends.Your TreeHouse Foods Career is Just a Click Away!Click on the “Apply” button or go directly towww.treehousefoods.com/careersto let us know you’re ready to join our team! TreeHouse Use Only: #IND1

StandardAero offers:Competitive wagesGenerous paid time offInsurance includes medical, dental and vison benefits.Retirement wages Clean, modern, air-conditioned facilitySafety focused cultureAdvanced opportunitiesBuild an Aviation Career You're Proud OfYour work ties us all together, helping our teams function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks.PROCESS ENGINEERAs a Process Engineer, you will provide support and technical assistance on various problems relating to product quality, production processes and product failure investigations. Conducts process-related research consistent with business unit strategies and goals in areas including cost reduction, process improvements, equipment utilization, quality, cycle times and repair development. Responsible for procurement and commissioning of equipment.What you'll do:Production SupportProvides day-to-day production support to assigned processes.Assists with the creation of matrix routings to manage the flow of materiel throughout the process.Documents procedures and work instructions.Provides process-related training with other support personnel.Process Control and ImprovementAnalyzes, develops and recommends methods to meet production requirements, improve economy and quality, and reduce turn-around-times for products and/or processes with supporting cost analysis. Establishes, analyzes, and acts upon measures of performance related to processes.Investigates and initiates corrective action of problems and deficiencies relating to equipment and processes to reduce variation and improve reliability.Repair Development and ImplementationDetermines the actions necessary to develop new repairs from engineering data.Contributes to the planning and conduct of repair trials to generate data for new repairs or to support existing repairs. Analyzes and documents the results of repair trials.Proposes, researches, and performs cost benefit analysis for new equipment purchases.In conjunction with the Production engineering group, acts as a liaison to coordinate the activities of Engineering and Operations during the implementation of new repairs and processes.OtherCoordinates and interacts with the outside resources including contractors, equipment vendors, and supply vendors for process support, improvement, or repair development. Provides support, technical expertise and experience to the Design Approval Organization (DAO) necessary to make airworthiness engineering decisions.Remains current with state-of the-art technologies and processes.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carries out special projects as assigned.Position Requirements:Working knowledge of PC's in the current company operating system environment.Strong planning, organizational, analytical, leadership, interpersonal, decision making, oral and written communication skills.Strong project management skills.Thorough knowledge of company process, company instruction and rework process instruction manuals.Thorough knowledge of aerospace materials and processes.In jurisdictions governed by a regulatory body or with an association that is governed by local legal requirements, registration is required.University degree in metallurgy, mechanical or chemical engineering; or equivalent.At least 3 years experience in an aerospace or manufacturing process engineering environment.Must be authorized to work in the US.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesAbout UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Part Time Engineer Home2 Suites Euless DFW West, 2570 Texas 121, Euless, Texas, United States of America Tru by Hilton Euless DFW West, 2570 Texas 121, Euless, Texas, United States of AmericaReq #5656 Tuesday, March 5, 2024 The Part Time Maintenance Engineer at the Home2 and Tru by Hilton Euless is responsible for assisting with the operation, maintenance, service, and repair of equipment as assigned.ESSENTIAL FUNCTIONSParticipate in the preventative maintenance program.Perform tasks in a safe and efficient manner.Assist with the operation, maintenance, and repair of equipment in guest rooms, public spaces, and hotel facilities.Effectively and professionally communicates with guests, co-workers, and supervisor.Ensures all fire and safety inspections and protocols are completed, and any discrepancies are corrected.Collaborates with vendors and suppliers to discuss scope of, and products and materials used in, repair activities.Obtains pricing and bids or develops cost estimates as needed.Monitors tools, supplies and inventories of maintenance department.Places orders with approved vendors as needed.Maintains working spaces in safe and clean condition.Communicates directly with front desk for guest service request issues, housekeeping for work orders, General Manager for orders and capital expenditure projects. Carry all equipment to be prepared to always carry out work tasks. Perform other tasks/jobs as assigned by the supervisor or manager.Other Duties as assigned.MINIMUM QUALIFICATIONSMust have a positive attitude and willingness to learn. Verbal and written communication skills.Ability to react quickly and calmly in emergency situations. Reasoning abilities are always utilized.Basic maintenance skills required.Proficient in use of hand tools, power tools, test equipment.Must be proficient in Windows operating systems, Company approved spreadsheets and word processing.Must be able to convey information and ideas clearly. Must have a desire to serve all guests. Must be 18 years of age or older to perform this job. PREFERRED QUALIFICATIONSTechnical, Trade or Vocational school degree.Licensed in a trade preferred (plumbing, electrical, HVAC, carpentry, etc.).At least 2 years of work-related experienceCarry all equipment (e.g., keys, phones, pager, tools, radio) to maintain preparedness to always carry out work tasks.Experience in a hotel, apartment, or a related field Our CompanyMCR is the3rd-largest hotel owner-operatorin the United States.Founded in 2006, our company has offices in New York City, Dallas, Chicago, and Richmond, Virginia.MCR has a$5.0 billion portfolioof148 premium-branded hotelscontaining more than 22,000 guestrooms across37 states and 106 cities.MCR has more than 7,000 team members across the country and operates hotels under 9 Marriott brands, 8 Hilton brands and a number of unflagged independent hotels.MCR was namedone ofFast Company’s 10 Most Innovative Travel Companies of 2020.MCR is a three-time recipient of theMarriott Partnership Circle Award, the highest honor Marriott presents to its owner and franchise partners, and a recipient of theHilton Legacy Award for Top Performer.For the TWA Hotel at New York’s JFK Airport, MCR won theDevelopment of the Year (Full Service) Award at The Americas Lodging Investment Summit (ALIS), the Urban Land Institute New York Excellence in Hotel Development Award and the American Institute of Architects national Architecture Award, the highest honor given by the AIAWhat we offer/What’s in it for you Hotel Discounts Weekly Pay Paid Time Off Retirement Options Referral bonuses Career advancement & upward mobility Health, Dental, Vision Insurance- available after 30 days of employment for full-time team members Other details Job FamilyHotelsPay TypeHourlyMin Hiring Rate$16.00Max Hiring Rate$16.00

Job DescriptionEpsilon is the leader in outcome-based marketing. We enable marketing that's built on proof, not promises. Through Epsilon PeopleCloud, the marketing platform for personalizing consumer journeys with performance transparency, Epsilon helps marketers anticipate, activate and prove measurable business outcomes. Powered by CORE ID®, the most accurate and stable identity management platform representing 200+ million people, Epsilon's award-winning data and technology is rooted in privacy by design and underpinned by powerful AI. With more than 50 years of experience in personalization and performance working with the world's top brands, agencies and publishers, Epsilon is a trusted partner leading CRM, digital media, loyalty and email programs. Positioned at the core of Publicis Groupe, Epsilon is a global company with over 8,000 employees in over 40 offices around the world.Job DescriptionThe role will be responsible for helping advance Epsilon internal tools and service offerings via process and system automation, covering machine data ingest and business use case (alerts, dashboards, etc.) deliverables. This role will work closely with associates at all levels from technical system administrators to business leadership.Experience in developing and maintaining a deep technical understanding of systems, product lines and technologies.A successful candidate will be expected to further DevOps strategies and skillsets within the team in support of stakeholder application and infrastructure enablement.Exposure in working in a large, complex technology initiatives of strategic importance to the organization involving cross-functional teams.Must be able to integrate quickly into the team and work independently toward team goals.Proven track record in developing automation workflows against cloud services and cloud native environments.You have experience with observability, logging, metrics, monitoring services, and making the data usable and meaningful to improve operational health & efficiencyWhat you will enjoy in this roleAs part of the Epsilon Service Delivery Team, the pace of the work matches the fast-evolving demands of Fortune 500 clients across the globeAs part of an innovative team that's not afraid to take risks, your ideas will come to life in IT process automation that enhances and strengthens internal tooling.The open and transparent environment that values innovation and efficiency.What you will doWork closely with internal stakeholders to understand their requirements and deliver best practice design and guidance in support of IT process automation that enhances and strengthens internal tooling while evangelizing new use cases among existing internal customers and stakeholders.Fulfil the responsibilities of a DevOps and automation engineer working on cloud-native technologies.Research the collection, parsing, and analysis of infrastructure data from various devices or services while developing/enhancing tool/service automation in support of greater data accuracy and consistency.Evangelize and develop DevOps strategies among team members to further team and process evolution supporting hybrid cloud business objectives.Develop and deliver custom, complex configuration and training to mature internal customers who want to better leverage our internal IT tools and services.Work closely with Product Management and Engineering teams to improve Epsilon's experience with our internal IT tools and services.Work with the IT Service Management leadership, IT service owners, process owners and various service delivery groups to develop business intelligence solutions that satisfy the business needs of the Shared Technology Services organization and other departments seeking to use ITOM and ITSM tools and data.Partner with multiple cross-functional departments and teams including Support and Operations to help meet business outcomes.Automate and apply development principles to operational practices for overall SaaS Service management.Technical SkillsCan develop scripts or code leveraging REST APIs, preferably with Python or PowerShellAdministrative experience with AWS, Azure, or Google Cloud servicesExperience with Infrastructure-as-Code such as Terraform or CloudFormationExperience with other automation like Ansible and CICD toolsSystems administrator experience with Linux or Windows operating systemsExperience with event logs, metrics, and the services needed to collect & use that dataCan assess, recommend, and optimize manual steps and replace with automationCan document and articulate with clarity solutions, patterns, and processesWorking knowledge of DevOps tooling like Bitbucket, Jira, Terraform a plusAdditional InformationAbout EpsilonEpsilon is a global advertising and marketing technology company positioned at the center of Publicis Groupe. Epsilon accelerates clients' ability to harness the power of their first-party data to activate campaigns across channels and devices, with an unparalleled ability to prove outcomes. The company's industry-leading technology connects advertisers with consumers to drive performance while respecting and protecting consumer privacy. Epsilon's people-based identity graph allows brands, agencies and publishers to reach real people, not cookies or devices, across the open web. For more information, visit epsilon.com.When you're one of us, you get to run with the best. For decades, we've been helping marketers from the world's top brands personalize experiences for millions of people with our cutting-edge technology, solutions and services. Epsilon's best-in-class identity gives brands a clear, privacy-safe view of their customers, which they can use across our suite of digital media, messaging and loyalty solutions. We process 400+ billion consumer actions each day and hold many patents of proprietary technology, including real-time modeling languages and consumer privacy advancements. Thanks to the work of every employee, Epsilon has been consistently recognized as industry-leading by Forrester, Adweek and the MRC. Positioned at the core of Publicis Groupe, Epsilon is a global company with more than 8,000 employees around the world. Check out a few of these resources to learn more about what makes Epsilon so EPIC:Our Culture: https://www.epsilon.com/us/about-us/our-culture-epsilonLife at Epsilon: https://www.epsilon.com/us/about-us/epic-blogDE&I: https://www.epsilon.com/us/about-us/diversity-equity-inclusionCSR: https://www.epsilon.com/us/about-us/corporate-social-responsibilityGreat People Deserve Great BenefitsWe know that we have some of the brightest and most talented associates in the world, and we believe in rewarding them accordingly. If you work here, expect competitive pay, comprehensive health coverage, and endless opportunities to advance your career.Epsilon is an Equal Opportunity Employer. Epsilon's policy is not to discriminate against any applicant or employee based on actual or perceived race, age, sex or gender (including pregnancy), marital status, national origin, ancestry, citizenship status, mental or physical disability, religion, creed, color, sexual orientation, gender identity or expression (including transgender status), veteran status, genetic information, or any other characteristic protected by applicable federal, state or local law. Epsilon also prohibits harassment of applicants and employees based on any of these protected categories. Epsilon will provide accommodations to applicants needing accommodations to complete the application process.#LI-TL1REF223190T

Description Unleash Your Potential:At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people and our community. Our Mission, Vision and Values guide the way we do business.Are you ready for your next career challenge We are seeking a talented and energetic candidate to work with the best and brightest employees around the country in creating innovative all-encompassing solutions for our programs. You will work in a fast-paced and diverse environment, enjoy flexible work arrangements, and will have a management team that encourages your career development and growth. In this role, you will gain many intangible skills, such as time and task management, critical thinking and problem solving, the ability to communicate complicated problems in a concise manner, as well as solve complex problems using available tools. The National Airspace Systems Integration Support (NISC) program at Leidos is seeking a Documentarian to perform a variety of duties in connection with the preparation of high profile business intelligence documents for FAA senior leaders, Lines of Businesses, or other external groups. The position will be supporting the Federal Aviation Administration's (FAA) Central Service Area (CSA) with the goal of providing outstanding customer service to FAA customers receiving NISC services. This position is based in Fort Worth, Texas and is an exciting opportunity to use your experience helping the NISC mission.The ideal candidate should be able to communicate to a variety of audiences including Air Traffic Operations, Technical Operations, and System Operations. Experience dealing with each of these organizations is necessary and the candidate must be knowledgeable of FAA orders to develop and provides assessments and technical recommendations. The ability to work in a team environment is critical as this will contribute to the overall success of the deliverable.Primary Responsibilities for the position include but are not limited to:Provide documentation support to include historical record of design changes, tracking the status of project activities, project risk, action items, and producing meeting minutes as directed by the project leads to support any airspace and procedures initiative.Demonstrate taking a concept and turning it into a product.Provide monthly reporting on the projects, meeting notes, participant attendance, as well as providing materials to compile reports and inform stakeholders at quarterly, monthly and weekly meetings.Conduct efficient, organized data gathering and data analysis and must be able to develop reports, establish schedules, and conduct studies.Clear and concise general and technical writing, prepare and conduct effective technical presentations, provide thorough project monitoring and reporting, and tactfully coordinate with a variety of project stakeholders, peers and management levels.Actively record important information disseminated in meetings; in-person and virtual, and organize that information and translate it into meeting minutes and reports. Transposing of large amounts of data with accuracy and speed.Capable of applying MS Word, Excel, PowerPoint, database management applications and know how to use the Internet as a data gathering and communicating tool.Provides organized documentation, and has an awareness of general documentation systems.Basic Qualifications: 10 plus years previous FAA Air Traffic Controller experience in an Enroute Facility or level 10 or greater Terminal Facility.5 years FAA Management/Staff experience at an Enroute Facility or level 10 or greater Terminal Facility.Must be able to conduct research, evaluations, studies, and develop recommendation to the FAA customer.Proficient in Microsoft Office Suite (Word, Excel, and PowerPoint).Experience with the recording of Technical DocumentationTypically requires a BA degree or additional years of experience may be considered in lieu of a degreeDesired Skills: Experience dealing with multiple lines of business in the FAA.Original Posting Date:2024-03-13While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $87,100.00 - $157,450.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Description Leidos is seeking a Civil Engineer to join the National Airspace System Integration Support Contract (NISC IV) Team, providing support to the Federal Aviation Administration's (FAA) Infrastructure Engineering Center.This position is located in Chicago, IL25% Telework25% TravelCivil Engineer Primary Responsibilities: Provide technical support to the Infrastructure Engineering Center, for accomplishment of project engineering packages:Develop site specific project plans and specifications for solicitation and contracting of engineering projects for FAA approval and acceptance.Perform site surveys to collect site-specific project data and research all (state, local, federal, FAA, etc.) standards, construction codes and ordinances.Provide analysis, recommendations, and solutions to issues identified during the site survey.Prepare summary trip reports within two working days of trip completion.Compile and complete project documents as follows:Scope of work and project transmittal.Drawing and specification lists.Operational Risk Management checklists.Furnish information required for the preparation of Purchase Requests (PR) for assigned projects.Furnish information required for the preparation of NAS Change Proposals (NCP) for assigned projects.List of Government furnished properties.Airspace case documents.Assessment of engineering impacts on Environmental & Safety Compliance Program Project checklists.Drawings and specifications.Engineering cost estimate for project plans per FAA Standard/guidelines.Estimated completion time and project schedule.Provide technical engineering support for all phases of assigned new construction and renovation projects (i.e. evaluate shop drawings, design proposals, and interpret the technical requirements for adherence to contract documents).Participate in Joint Acceptance Inspections and Contractor Acceptance Inspections on all assigned projects and provide recommended resolutions on all items relating to engineering.Perform engineering studies for feasibility and cost versus benefit. Provide technical input to the Government Technical Interpreter in actions to plan, budget, program, and coordinate the development of engineering projects.Develop project drawings in accordance with the FAA Standard/guidelines.Civil Engineer Basic Qualifications:Bachelor of Science and 4+ years of experience with Civil Engineering Design and experience with tower, shelter, and similar structure projects.Knowledge of Unstaffed Infrastructure Sustainment (UIS) facilitiesCivil Engineer Preferred Qualifications:Proficiency in AUTOCAD.Knowledge of Corporate Work Plan (CWP) 4.1.12Knowledge of National Airspace System Equipment Tower (NASET)Knowledge of National Airspace System Equipment Building (NASEB)Knowledge of Heating Ventilating and Air Conditioning (HVAC), power, general building construction techniques, Hazardous Materials (HAZMAT), fire detection, security, site work.NISC IVOriginal Posting Date:2024-04-16While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $68,900.00 - $124,550.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business.Our Overhead Transmission business seeks a Transmission Design Engineer with PLS-CADD experience to join its team in Irving, TX (remote candidates are welcome to apply). Come join us in delivering projects that make a difference.The successful candidate will serve as a Lead Engineer on electric transmission design projects for high-voltage (HV) and extra high-voltage (EHV) overhead utility systems. He/she will apply NESC, NEC, ASCE and other applicable standards in the engineering and design of electrical overhead, voltage conversion projects, new capacity projects and infrastructure replacement projects. Additionally, he/she will assist the team as well as independently perform engineering analyses, prepare bidding documents, plans and specifications; as well as prepare material procurement and construction documents, and work with project planning, environmental, permitting, and construction management.We will consider qualified candidates to work fully remote (must reside in the U.S. only). This position offers the successful candidate to develop an engineering team with direct report responsibilities. The candidate will also be responsible for managing client relations, proposal development, scope creation, and project management.Desired Qualifications - You will be successful if you have the following experience, skills, and abilities:Bachelor’s degree in Civil Engineering and minimum of four (4) years of prior relevant experience in the design of electric utility transmission systemsExperience in reviewing full transmission line designs including PLS-CADD models, foundations, material, plan and profiles, and construction packagesKnowledge of NESC, ACI, AISC, and ASCE code requirements; construction specifications; material procurement process; project schedules; and construction work packages.Develop project scopes, budgets, and proposalsAbility to work effectively in team environment but also able to work independentlyProven ability to communicate with clients and project teamsMust have leadership experience and supervising others (required for Senior and SME Level)Work in client office is a possibility and/or periodic travel may be requiredProgram Expertise:PLS-CADD and POLELPILE or FAD ToolsMicrosoft OfficePreferred Experience:EIT, FE, or Professional Engineer (PE) LicenseProgram Experience:PLS TOWERBentley MicroStationBentley ProjectWiseMathcadAutodesk AutoCADConstruction Management and SupportLeidos is growing!Connect with us on LinkedIn and Facebook.We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive and ethical workplace. In fact, in 2023, Leidos was ranked as one of the “World's Most Ethical Companies” by the Ethisphere Institute for the sixth consecutive year.PDSTLINEPowerDeliveryOriginal Posting Date:2024-01-30While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $68,900.00 - $124,550.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Remote

Description Unleash Your PotentialAt Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer’s success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.If this sounds like an environment where you can thrive, keep reading!The ChallengeOur Overhead Transmission business is in search of a Transmission Design Engineer with PLS-CADD experience to join its team in Irving, TX (remote candidates welcome).In this role, you will serve as an Engineer on electric transmission line design projects for high-voltage (HV) and extra-high-voltage (EHV) overhead and underground systems for some of the largest utilities in the country. You will apply NESC, ASCE, ACI, and other applicable standards in the engineering and design of electrical overhead and underground systems, voltage conversion projects, new capacity projects, and infrastructure replacement projects. Additionally, performing engineering analyses, preparing bidding documents, draft plans, and specifications, as well as preparing material procurement and construction documents. This will involve working with a multi-person Leidos team and interfacing with clients, project planning, environmental, permitting, and construction management personnel. *Work Location: Irving (Dallas), TX (with potential remote opportunities).With Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business.Your greatest work is ahead!The Mission Leidos EIA (Energy, Infrastructure, and Automation) helps modernize infrastructure, systems, and security. We are a trusted partner to both government and highly-regulated commercial customers looking for transformative solutions in mission IT, security, software, engineering, and operations. We work with our customers including the FAA, DOE, NASA, National Science Foundation, Transportation Security Administration, Custom and Border Protection, airports, and electric utilities to make the world safer, healthier, and more efficient. Our customers take on the toughest challenges out there, and at times need a helping hand from specialists in their fields. We combine our scale as a Fortune 500 company with the deep technical knowledge of our core capabilities and the expertise of our talented and diverse workforce to deliver mission-centric innovations. For each of these core capabilities, we have developed proven, repeatable processes that help us deliver agile, cost-effective solutions to foster a better world. To explore and learn more, click here!Are you ready to make an impact Begin your journey of a flourishing and meaningful career, share your resume with us today!What Sets You Apart:Bachelor’s degree in Civil, Electrical, or Mechanical Engineering with two (2) + years of relevant experience in the design of electric utility transmission systemsExperience using PLS-CADD and PLS-POLE.Work effectively in team environment; can also work independently.Excellent verbal and written communication skills; ability to communicate with clients and project teams.Work in client office is a possibility and/or periodic travel may be required.You Might Also Have: Experience with TOWER is a plus.EIT or PE certification is desirable.Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus.Grow with us! Through training, teamwork, and exposure to challenging technical work, let Leidos show you how to accelerate your career path. Apply today!PDSTLINEPowerDeliveryPay Range:Pay Range $55,250.00 - $99,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Remote

Description Have you ever wondered what it would be like to work with one of the BEST in government contracting Ranked by Forbes in 2018 as a Top 100 government contractor and one of the World's Most Ethical Companies, Team Leidos is one you don't want to overlook.Everything we do is built on a commitment to do the right thing for our customers, our people and our community. We embrace and solve some of the world's toughest challenges. We know once you join Team Leidos, you are sure to go home at the end of the every day knowing You Made A Difference, resulting in one of the most rewarding careers you could have imagined.We are seeking qualified candidates for the position of Electronics/Electrical Engineer to serve as project engineers responsible for planning and design activities to support the Federal Aviation Administration (FAA) facility modernization projects. This position involves the development of project plans, project scopes, schedules, costs, and resource requirements and the development of drawings, specifications, and risk management documents in coordination with facility stakeholders from Technical Operations and Air Traffic organizations. This includes environmental equipment and mechanical system installations, roofing, parking lots, facility refurbishment, and security door installations. This work is in the Central Service Area of the FAA and are managed out of regional offices located in Fort Worth, Texas, Des Plaines, IL and Kansas City, MO.We are seeking a talented and energetic candidate to work with the best and brightest employees around the country in creating innovative all-encompassing solutions for our programs. You will work in a fast-paced and diverse environment, enjoy flexible work arrangements, and will have a management team that encourages your career development and growth. In this role, you will gain many intangible skills, such as time and task management, critical thinking and problem solving, the ability to communicate complicated problems in a concise manner, as well as solve complex problems using available tools.The candidate will support the FAA’s Engineering Services Terminal team by applying broad experience and advanced technical knowledge on multiple, varying, and complex assignments. It is necessary to plan, coordinate and perform work with a high degree of independence, while keeping the Project Engineer advised of significant problem areas.Primary Duties and Responsibilities include but not limited to:Perform on-site surveys to develop “to-scale” designs and detailed reports.Generate sketches showing relation of proposed installation in existing or new facilities with exact specifications and dimensions.Participate in construction inspections and final inspections.Confer with engineering staff and other personnel to identify and resolve problems with the design or implementation.Coordinate design components with a multi-disciplinary as required for site-specific modifications and new construction.PrepareAutoCADconstruction drawings and prepare site-specific specifications and contract documents and independent cost estimates.Perform project management related tasks and communication (including safety plans, sequence of work, cutover plans).Generate and coordinate the Integrated Risk Management Checklists (IRMC), communication plans, project risk register, to meet Operational Risk Management (ORM) requirements.Coordinate and complete Work Permits required for potential impact to lead and asbestos that may be encountered during construction.Participate in meetings inclusive of the pre-construction meeting and on-site construction meetings with stakeholders to coordinate with other ongoing construction and projects.Plan, schedule, and coordinate construction project activities to meet milestones and deadlines, working directly with stakeholders and contractors.Manage and participate in on-site cutovers, testing and restoration of facilities.Prepare, maintain, and provide periodic updates of project to team, management, and stakeholders.Perform internal design reviews of FAA designed engineering projects.Track and reconcile and coordinate closure of Joint Acceptance Inspections (JAI) and Contractor Acceptance Inspections (CAI) on all assigned projects and provide recommended resolutions on all items related to engineering.Review project deliverables and provide verbal and written communication to the findings.Basic Qualifications:Must have an Electronics or Electrical Engineering degree and 4 – 8 years of prior relevant experience or Master’s with 2 – 6 years of prior relevant experience or equivalent.Working knowledge of MS Word, Excel, Power Point, and Engineering Scheduling tools and applications, and be able to use the Internet as a gathering and communicating tool.Proficiency with AutoCAD / MicroStation or similar tools.Ability to effectively communicate in written and verbal form.Ability to accomplish clear and concise general and technical writing and tactfully coordinate with a variety of project stake holders, peers, and management levels.Ability to maintain an electronic project folder (as required) related to site preparation and equipment installation problems.Ability to provide technical assistance and recommendations regarding the closure of construction related punch-list items.Ability to work independently in a large Engineering Organization.Basic knowledge of multiple disciplines regarding their general requirements for typical standard types of projects.Ability to discuss project related items with stakeholders, contractors, and code related Authorities Having Jurisdiction (AHJ).Ability to work in a fast-paced team environment.Ability to obtain a Public Trust Clearance and pass a drug screening.Desired Qualifications:Knowledge of National Electric Code (NEC), National Fire Protection Assoc (NFPA) standards, National Airspace System Equipment TowerKnowledge of OSHA and general construction and electrical safety standards.Knowledge of NAS facilities such as ASR, ATCT, VOR, ARSR, RCAG.(NASET),NationalAirspace System Equipment Building (NASEB).Knowledge of Corporate Work Plan (CWP) 4.1.12Original Posting Date:2024-05-10While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $81,250.00 - $146,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Have you ever wondered what it would be like to work with one of the BEST in government contracting Ranked by Forbes as a Top 100 government contractor and one of the World's Most Ethical Companies, Team Leidos is one you don't want to overlook.Everything we do is built on commitment to do the right thing for our customers, our people and our community. We embrace and solve some of the world's toughest challenges. We're focused on ensuring our customers have the right tools, technologies, and tactics to keep pace with an ever-evolving landscape and succeed in their mission to protect people and critical assets around the world. We know once you join Team Leidos, you are sure to go home at the end of each day knowing YOU MADE A DIFFERENCE, resulting in one of the most REWARDING careers you could have imagined. WE WANT YOU!The National Airspace Systems Integration Support (NISC) program at Leidos is seeking an Electronics Engineer to provide support to the Federal Aviation Administration (FAA) Central Service Area - Engineering Services Group located in the Northwest Mountain Regional Office in Des Moines, WA.The ideal candidate will support the daily operations of the FAA Enterprise Network Services (FENS) Program. FENS is the successor to the FAA Telecommunications Infrastructure (FTI) contract, which was implemented in 2002 to provide over 30,000 communications services to more than 4,500 facilities within the National Airspace System.The program aims to design, build, operate and maintain the FAA's next-generation communications platform and to build a dynamic, highly available and secure enterprise network to support all the agency's mission-critical applications across the NAS.Job Duties Include:Evaluate existing site surveys to develop scope of work for site preparation requirementsConduct site surveys at remote sites for FENS site preparation requirementsDraft site preparation scope of work for facilities based on site survey reports and facility dataIdentify FENS contract CLINs required to complete site preparationDevelop cost estimates for site preparationReview contractor site prep proposals for accuracy and compliance with scope of workGenerate ORM PRP’s for site preparation and installation of FENS equipmentWork with SSC/TSC/AT to implement risk mitigations for FENS implementationCoordinate and scheduled site preparation activities with SSC/TSC/AT/FENS personnelOversee site prep and installation work performed by FENS contractorGenerate periodic status reportsUpdate Corporate Work Plan (CWP) dataUpdate facility drawings (red lines) for draftingBasic Qualifications:Electronics Engineering Degree (B.S.) with 2 to 8 years’ experience. In lieu of degree, additional years of experience may be substituted.Ability to travel 25%-50%.Proficiency in MS Office Suites.Proficient working with AutoCAD, MicroStation or similar tools.Desired Qualifications:Knowledge of National Electric Code (NEC), National Fire Protection Assoc (NFPA) standards, National Airspace System Equipment TowerKnowledge of OSHA and general construction and electrical safety standards.Knowledge of NAS facilities such as ASR, ATCT, VOR, ARSR, RCAG.(NASET),NationalAirspace System Equipment Building (NASEB).Knowledge of Corporate Work Plan (CWP) 4.1.12Original Posting Date:2024-04-17While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $65,000.00 - $117,500.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.