SEARCH
GO
Manufacturing Jobs
Full Time
5/8/2025
Buda, TX 78610
(1.4 miles)
Job Description: Quality Assurance SpecialistIMMEDIATELY HIRING! Quality Assurance Specialist FULL-TIME Opportunity in Remote, TXStarting Wage: $41.00-$47.00/hr DOERemote potential after 10 week training period and evaluationThe Quality Assurance Specialist will perform their duties and responsibilities in support of the company’s 14 CFR Part 135 Air Carrier Certificate. This role requires the specialist to possess strong quality assurance attributes and the ability to focus on the minute details of complex technical matters and the associated technical data. The specialist must have the experience and knowledge necessary to apply the appropriate standards to ensure company aircraft are maintained and modified in accordance with the relevant data and applicable regulatory requirements. The Quality Assurance Specialist will report directly to the Quality Assurance Manager.ResponsibilitiesDevelop, revise, and administer Aircraft Minimum Equipment Lists (MEL).Develop, revise, and administer FAA Approved Aircraft Inspection Programs (AAIP).Develop and administer aircraft Master Inspection Lists (MIL) compiling all inspections, scheduled maintenance, overhaul, and service life limitation requirements IAW the aircraft and engine manufacturer’s technical source documents.Create aircraft Configuration Control Documents (CCD) by researching aircraft records and inputting relevant data into the Master Inspection Lists (MIL). Maintain the CCD by updating sections with new requirements from revised source documents and reflecting aircraft configuration changes due to modifications and equipment updates.Administer aircraft maintenance tracking programs to include performing revisions and gap audits to manufacturer’s technical source documents and applying corrections, as necessary.Monitor new and recurring FAA Airworthiness Directives and manufacturer’s service bulletins. Interpret and communicate complex technical data to guide field technicians in performing appropriate corrective actions.Perform aircraft acceptance inspections after heavy maintenance and modification work scopes; verify conformity of alterations on new and refurbished aircraft completed for Emergency Medical Service (EMS) operational configurations to FAA approved design data.Ensure aircraft conformity to certification and operational regulatory requirements by generating substantiating document packages. This process is essential for obtaining FAA approval to add aircraft to Guardian Flights FAR Part 135 air carrier certificates.Administer Aircraft Weight and Balance program and Equipment Lists.Audit aircraft maintenance records and generate work scopes for aircraft major maintenance and modification events.Perform technical and regulatory oversight of major repairs and major alterations applied to company aircraft.Support the Records Department by reviewing aircraft return-to-service documentation, parts certifications, and major repair and alteration records to ensure compliance with regulatory requirements.Assist field technicians interpreting complex technical data and regulatory compliance matters.Support the Director of Maintenance in managing fleet aircraft as directed. Fulfill additional responsibilities assigned by the Quality Assurance Manager.Minimum Required QualificationsHigh School Diploma, GED, or equivalent.FAA Airframe & Powerplant License.A minimum of 5 years’ relevant experience with a 14 CFR Part 135 air carrier or Part 145 certified repair station preferably in a quality assurance or technical support role.Experience in aircraft operations, with exposure to Beechcraft King Air and Pilatus PC12 series turboprop aircraft highly desirable.Ability to interpret, apply, and effectively communicate complex technical data and processes associated with aircraft maintenance and alterations.Initiative-taking and meticulous focus on quality, safety, and regulatory compliance.Possess honesty, integrity and a commitment to safety and regulatory compliance.Possess excellent listening, verbal and written communication and critical thinking skills.Ability to work in a rapidly evolving and dynamic environment.Possess a strong work ethic, customer service skills, and the ability to communicate effectively both in writing and verbally.Ability to work in a team environment with an eagerness to contribute to the overall success of the Maintenance department and the Company.Must be proficient in a dynamic computerized working environment, performing administrative tasks using Microsoft Office Suite programs, web-based maintenance management programs, and Enterprise Resource Planning (ERP) systems.Ability to be onsite for the first 10 weeks of employmentPreferred QualificationsBachelor’s degree in aviation management, Maintenance or Technology or a related field or equivalent combination of education and experience.FAA Airframe & Powerplant License with Inspection Authorization.A minimum of 10 years’ relevant experience with a 14 CFR Part 135 air carrier or Part 145 certified repair station preferably in a quality assurance or technical support role.Extensive firsthand experience in performing maintenance and alterations on Beechcraft King Air and Pilatus PC-12 series turboprop aircraft is highly desirable. A strong background in working with these specific aircraft models, demonstrating proficiency in maintaining, troubleshooting, and modifying their systems to ensure optimal performance and safety.Experience working with FAA Aircraft Safety Inspectors for applying major alterations on aircraft certificated under 14 CFR parts 23, 25 and 27.Experience processing aircraft documents packages for FAA conformity inspections for adding aircraft to an air carrier certificate.Experience developing and administering FAA Approved Aircraft Inspection Programs (AAIP) and Minimum Equipment Lists (MEL).Why Choose Guardian As a quality air medical transport service,Guardian Flightis one ofGlobal Medical Response’s(GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the worldatwww.AtaMomentsNotice.com. Learn how ourvaluesare at the core of our services and vital to how we approach care and check out our comprehensive benefit options atGlobalMedicalResponse.com/Careers. EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Check out our careers site benefits page GMR Benefitsto learn more about our comprehensive benefit options, which include medical, vision, dental, 401k, disability, FSA, HSA, EAP, vacation and paid time off.
Full Time
5/9/2025
Del Valle, TX 78617
(14.2 miles)
SUMMARY: Define, develop, and oversee the implementation of new manufacturing processes primarily for Raytheon connectors and cable assemblies or improvements to existing manufacturing processes, maintaining high levels of manufacturing and product quality while ensuring cost-efficiency and conformance with regulatory standards.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Work closely with Raytheon design engineering on new products and special manufacturing process requirements.Review Supplier Statement of Work (SSOW) for compliance and, where needed, implementation of new procedures / processes in order to meet SSOW requirements.Assist with developing cost / pricing strategy for SSOW compliance requirements related to design and manufacturing engineeringEvaluating existing processes and identifies areas for improvementAssist the Quality Engineering with determining root cause in problem analysis and implementing solutionsAnalyze process plans, determining lean-based layouts and work force planning/utilization for maximum efficiencyAssist the Quality Engineering with complete detailed, documented process qualification procedures, including PFMEAs, Quality Control Plans, First Article Inspection Requirements, and Capability Studies.Developing and implementing cost savings and quality improvement projectsUtilize PTC Creo to design simple tooling, jigs and fixturesDevelop, write, and communicate Statements of Work for complex capital purchasesConduct detailed, on-site vendor assessments and auditsProvide Design for Manufacturability review and feedback to product engineering on new product designsDetermine accurate manufacturing costs for new process implementations or improvements and update manufacturing systems with accurate data for planning and accountingIdentify and implement cost savings, calculating anticipated savings and return on investmentUtilize Lean and Six Sigma techniques in all aspects of qualification and problem solvingInterface with customers and organizational bodies as manufacturing engineering representative during customer visits and auditsMust perceptive to direct and indirect impact of proposed solutions on quality, cost, and operator satisfaction and can easily express those values of proposed solutions to all levels in the organization.KNOWLEDGE, SKILLS, AND ABILITIESRequires the knowledge typically acquired through:Completion of a four year Bachelor’s degree or equivalent;Two to three years related experience and/ or training; or equivalent combination of education and experience.Technical writingPresentation skills, with the ability to tailor the message to the audienceLean MethodologiesSix Sigma and related technical problem solving toolsDigital Factory connectivity Ability to write articles for publication that conform to prescribed style and format and effectively present information to top management.Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 5%.[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.
Full Time
5/9/2025
Del Valle, TX 78617
(14.2 miles)
SUMMARY: Define, develop, and oversee the implementation of new manufacturing processes primarily for Raytheon connectors and cable assemblies or improvements to existing manufacturing processes, maintaining high levels of manufacturing and product quality while ensuring cost-efficiency and conformance with regulatory standards.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Work closely with Raytheon design engineering on new products and special manufacturing process requirements.Review Supplier Statement of Work (SSOW) for compliance and, where needed, implementation of new procedures / processes in order to meet SSOW requirements.Assist with developing cost / pricing strategy for SSOW compliance requirements related to design and manufacturing engineeringEvaluating existing processes and identifies areas for improvementAssist the Quality Engineering with determining root cause in problem analysis and implementing solutionsAnalyze process plans, determining lean-based layouts and work force planning/utilization for maximum efficiencyAssist the Quality Engineering with complete detailed, documented process qualification procedures, including PFMEAs, Quality Control Plans, First Article Inspection Requirements, and Capability Studies.Developing and implementing cost savings and quality improvement projectsUtilize PTC Creo to design simple tooling, jigs and fixturesDevelop, write, and communicate Statements of Work for complex capital purchasesConduct detailed, on-site vendor assessments and auditsProvide Design for Manufacturability review and feedback to product engineering on new product designsDetermine accurate manufacturing costs for new process implementations or improvements and update manufacturing systems with accurate data for planning and accountingIdentify and implement cost savings, calculating anticipated savings and return on investmentUtilize Lean and Six Sigma techniques in all aspects of qualification and problem solvingInterface with customers and organizational bodies as manufacturing engineering representative during customer visits and auditsMust perceptive to direct and indirect impact of proposed solutions on quality, cost, and operator satisfaction and can easily express those values of proposed solutions to all levels in the organization.KNOWLEDGE, SKILLS, AND ABILITIESRequires the knowledge typically acquired through:Completion of a four year Bachelor’s degree or equivalent;Two to three years related experience and/ or training; or equivalent combination of education and experience.Technical writingPresentation skills, with the ability to tailor the message to the audienceLean MethodologiesSix Sigma and related technical problem solving toolsDigital Factory connectivity Ability to write articles for publication that conform to prescribed style and format and effectively present information to top management.Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 5%.[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.
Full Time
5/4/2025
Del Valle, TX 78617
(14.2 miles)
SUMMARY: Manages and supervises the Manufacturing Engineering department and oversees facilities.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Plans and formulates aspects of research and development proposals such as objective or purpose of project, applications that can be utilized from findings, costs of project, and equipment.Reviews and analyzes proposals submitted to determine if benefits derived and possible applications justify expenditures.Approves and submits proposals considered feasible to management for consideration and allocations of funds.Develops and implements methods and procedures for monitoring projects such as preparation of records of expenditures and research findings, progress reports, and staff conferences, in order to inform management of current status of each project.Negotiates contracts and selects vendors to perform development and fabrication of automation, tooling, and services used in the manufacturing processes.May be required to manage the Tool & Die department including the planning of project and work schedules, equipment, repair and maintenance assistance, and other resources.Performs other tasks and duties that are related to the Manufacturing Engineer job description.May be required to manage the patent liaison work that is retained from legal firms. Oversees facilities projects and maintenance.KNOWLEDGE, SKILLS, AND ABILITIESRequires knowledge typically acquired through:Completion of a Bachelor’s Degree from a four year college or university;Five to seven years related experience or training; and/or equivalent combination of education and experience.Ability to read, analyze, and interpret common scientific and technical journals, financial reports and legal documents.Ability to respond to common inquiries or complaints from customers and regulatory agencies.Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis.Ability to effectively present information and respond to questions from groups of managers, clients, customers, employees and the general public.Requires ability to define problems, collect data, establish facts, and draw valid conclusions.Requires ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 10%. [Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.
Sorry, there are no more results for this search at this time. Here are some more jobs you may be interested in.
Part Time
5/10/2025
Bee Cave, TX 78738
(17.0 miles)
$20.00 to $23.00 / hr
We are looking for Part-Time Night Trash Collectors to join us! Having your own truck is preferred but not required. Pay is $23 per hour if you have your own truck and $20 per hour for helpers (no pick up truck).
Are you interested in a part-time opportunity to earn extra income in the evenings? Do you like working outdoors and staying active? If so, you may be a good fit for our Apartment Trash Collector position.
Valet Living is hiring for a Part Time Apartment Trash Collector (Service Valet) to work during the evening hours in your local area. This is a great paying, part time job that is a great way to earn extra money or supplement income while working another job. You’ll enjoy working outdoors, on your own, in a stress-free environment and get a workout while you do this job.  We are an essential business that continues to grow, and our associates benefit from reliable hours, consistent pay, and promotional advancement opportunities.
We offer an immediate start date and provide hands-on, paid training. No experience is necessary.
Collect trash and recycling bags door to door within a local apartment community and take these items to the trash compactor or dumpster on the property site (no large or bulk items and no offsite driving and/or dumping) Typically work 5 nights a week from Sunday through Thursday. Enjoy weekends off! Work 2-3 hours per night, start time is either 7:00pm or 8:00pm and you are done between 10:00 pm - 11:00 pm (some positions may have earlier start/end times and Sundays may require more hours) Part time hours working 10-15+ hours per week
Benefits: Great pay - pickup truck owners and vehicles using trailers will receive the higher part of our pay range. Get paid as you earn using EarnIn**. All driving is done while on community property – no offsite driving or dumping. Paid training and opportunity for growth within the company Employee referral bonus program – get paid for your referrals Earn reward incentives through our recognition program Tuition reimbursement Stay physically fit while working outdoors
**EarnIn is a mobile app that gives people access to their money as they earn it – without waiting for payday.
Qualifications: Must be at least 18 years of age Ability to work indoors or outdoors in changing weather conditions Ability to lift and transport up to 50 lbs. A smart phone with data plan to access our mobile app An open bed pickup truck or vehicle with trailer is preferred A valid driver's license is preferred Current auto insurance in your name for your vehicle, or listed as a driver on policy is preferred
Safety statement: Socially distanced work environment All required Personal Protective Equipment (face covering, gloves, safety vest, etc.) is provided free of charge Our processes exceed the CDC and OSHA guidelines on COVID-19 safety Zero reported occupationally transmitted cases of COVID-19 Dedicated team of occupational health & safety professionals that manage all aspects of associate safety, including COVID-19 protocols.
Valet Living is an Equal Opportunity Employer that values the strength diversity brings to the workplace. We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law.
Full Time
5/5/2025
Austin, TX
(14.2 miles)
The Alabama-Coushatta Indian Tribal Council Employment & Training Program is a Tribal Program that was formed in 1973. The program was designed by the Department of Labor’s Division of Indian and Native American Programs (DINAP) and is managed by the Alabama-Coushatta Tribe of Texas.
Our program provides employment and training services to Native Americans/American Indians, Native Hawaiians, and Native Alaskans that reside within the 121 county service area of the State of Texas.
It is the mission of the Alabama-Coushatta Indian Tribal Council Employment & Training Program to provide quality educational and employment opportunities to our Native American/American Indian, Native Hawaiian, and Native Alaskan clients in our service delivery area by reaching out into communities and joining forces with business leaders, workforce boards, service providers, and educational institutions to ensure participants are well prepared to meet the opportunities of employment such that they may take advantage of progressive career opportunities.
You must be a member of a U.S. Federally recognized tribe with a supporting document from a federally recognized Tribe's Tribal Rolls and Records Office
Workforce Innovation and Opportunity Act Section 166, 20 CFR 684.300 (a) (1) An Indian, as determined by a policy of the INA program grantee; (2) Alaska Native; or (3) Native Hawaiian.
Our Services: EMPLOYMENT CAREER SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.
TRAINING SERVICES - Provide job readiness training as a means of better preparing Native Americans for the workforce.
EDUCATION SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.
Part Time
4/15/2025
Austin, TX 78735
(12.3 miles)
$20.00 to $23.00 / hr
We are looking for Part-Time Night Trash Collectors to join us! Having your own truck is preferred but not required. Pay is $23 per hour if you have your own truck and $20 per hour for helpers (no pick up truck).
Are you interested in a part-time opportunity to earn extra income in the evenings?  Do you like working outdoors and staying active? If so, you may be a good fit for our Apartment Trash Collector position.
Valet Living is hiring for a Part Time Apartment Trash Collector (Service Valet) to work during the evening hours in your local area. This is a great paying, part time job that is a great way to earn extra money or supplement income while working another job. You’ll enjoy working outdoors, on your own, in a stress-free environment and get a workout while you do this job.  We are an essential business that continues to grow, and our associates benefit from reliable hours, consistent pay, and promotional advancement opportunities.
We offer an immediate start date and provide hands-on, paid training. No experience is necessary.
Collect trash and recycling bags door to door within a local apartment community and take these items to the trash compactor or dumpster on the property site (no large or bulk items and no offsite driving and/or dumping) Typically work 5 nights a week from Sunday through Thursday. Enjoy weekends off! Work 2-3 hours per night, start time is either 7:00pm or 8:00pm and you are done between 10:00 pm - 11:00 pm (some positions may have earlier start/end times and Sundays may require more hours) Part time hours working 10-15+ hours per week
Benefits: Great pay - pickup truck owners and vehicles using trailers will receive the higher part of our pay range. Get paid as you earn using EarnIn**. All driving is done while on community property – no offsite driving or dumping. Paid training and opportunity for growth within the company Employee referral bonus program – get paid for your referrals Earn reward incentives through our recognition program Tuition reimbursement Stay physically fit while working outdoors
**EarnIn is a mobile app that gives people access to their money as they earn it – without waiting for payday.
Qualifications: Must be at least 18 years of age Ability to work indoors or outdoors in changing weather conditions Ability to lift and transport up to 50 lbs. A smart phone with data plan to access our mobile app An open bed pickup truck or vehicle with trailer is preferred A valid driver's license is preferred Current auto insurance in your name for your vehicle, or listed as a driver on policy is preferred
Safety statement: Socially distanced work environment All required Personal Protective Equipment (face covering, gloves, safety vest, etc.) is provided free of charge Our processes exceed the CDC and OSHA guidelines on COVID-19 safety Zero reported occupationally transmitted cases of COVID-19 Dedicated team of occupational health & safety professionals that manage all aspects of associate safety, including COVID-19 protocols.
Valet Living is an Equal Opportunity Employer that values the strength diversity brings to the workplace. We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law.
Full Time
5/1/2025
Austin, TX 78745
(9.2 miles)
Overview: “TexPTS truly listens to its employees and also provides us autonomy rather than being a puppet on a string. I took this job not entirely knowing what I was getting in to, and it’s been the best career move I’ve ever made.” -Jordan Mazick PT, DPT, OCSPhysical TherapistJob Type: Full TimeSalary: $75,000-90,000/ YearJob Location: South Austin Region - Bee Cave, Cedar Valley, Lakeway, Westgate, South Congress, Goodnight Ranch, and more!Potential Sign On Bonus of up to $10,000 for select positions!How TexPTS and Confluent Health Supports You:Student loan repayment program – We pay your lender monthly! IRS approved. Value increases after two years of employment!Fully paid trainings, certifications and education programs through Evidence in Motion (EIM)Orthopedic and Sports Residency programs through TexPTS – Company paid! $15k ValueAverage less than 12 patients per dayWeekly bonus based on patient volumeA focus to create a diverse, equitable, and inclusive workplace cultureComprehensive mentorship and career developmentLeadership and talent development opportunitiesGenerous Paid Time OffIndustry leading Medical, Dental, Vision, LTD insurances401(k) Employer MatchingFamily Building and Parental Benefits*Part-time and PRN employees are only eligible to participate in the 401(k) benefit. Responsibilities: You’ll achieve success by:Delivering outstanding care in an outpatient setting, utilizing the latest evidence-based methodsReviewing patients' medical historyDiagnosing patients by observing their movements and listening to their concernsDeveloping individualized treatment plans for patientswith clear goals and expected outcomesUsing exercises, stretching, equipment, and hands-on manual therapy to manage patients’ pain, increase mobility, and prevent further pain and injuryRecording patient progress and modifying the plan of care as needed Qualifications: Physical Therapist Licensure in good standing in the state of Texas or currently pursuing a Doctor of Physical Therapy DPT degreeWho We Are: For 20 years, Texas Physical Therapy Specialists (TexPTS) has been helping people return to their work, life, and play without pain. We are recognized leaders in orthopedic and sports physical therapy, with the highest number of Board Certified Specialists in the field. As part of the Confluent Health family, we’re committed to empowering the next generation of physical therapists. TexPTS is a member of the Confluent Health family of physical and occupational therapy companies. Together, we are transforming healthcare by strengthening private practices and developing highly effective clinicians all across the country.Voted “Best Places to Work” 2023, 2024 & 2025! 4+ star employer as rated on Glassdoor!Use the link to see what our team members are saying! https://www.glassdoor.com/Overview/Working-at-Texas-Physical-Therapy-Specialists-EI_IE785278.11,45.htmConfluent Health and Texas Physical Therapy Specialists provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Confluent Health and TexPTScomplies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.#CH500
Full Time
5/1/2025
Lakeway, TX 78738
(18.3 miles)
Overview: “TexPTS truly listens to its employees and also provides us autonomy rather than being a puppet on a string. I took this job not entirely knowing what I was getting in to, and it’s been the best career move I’ve ever made.” -Jordan Mazick PT, DPT, OCSPhysical TherapistJob Type: Full TimeSalary: $75,000-90,000/ YearClinic Location: Lakeway - 101 Medical Parkway Lakeway, TX 78738Potential Sign On Bonus of up to $10,000 available!How TexPTS and Confluent Health Supports You:Student loan repayment program – We pay your lender monthly! IRS approved. Value increases after two years of employment!Fully paid trainings, certifications and education programs through Evidence in Motion (EIM)Orthopedic and Sports Residency programs through TexPTS – Company paid! $15k ValueAverage less than 12 patients per dayWeekly bonus based on patient volumeA focus to create a diverse, equitable, and inclusive workplace cultureComprehensive mentorship and career developmentLeadership and talent development opportunitiesGenerous Paid Time OffIndustry leading Medical, Dental, Vision, LTD insurances401(k) Employer MatchingFamily Building and Parental Benefits*Part-time and PRN employees are only eligible to participate in the 401(k) benefit. Responsibilities: You’ll achieve success by:Delivering outstanding care in an outpatient setting, utilizing the latest evidence-based methodsReviewing patients' medical historyDiagnosing patients by observing their movements and listening to their concernsDeveloping individualized treatment plans for patientswith clear goals and expected outcomesUsing exercises, stretching, equipment, and hands-on manual therapy to manage patients’ pain, increase mobility, and prevent further pain and injuryRecording patient progress and modifying the plan of care as needed Qualifications: Physical Therapist Licensure in good standing in the state of Texas or currently pursuing a Doctor of Physical Therapy DPT degreeWho We Are: For 20 years, Texas Physical Therapy Specialists (TexPTS) has been helping people return to their work, life, and play without pain. We are recognized leaders in orthopedic and sports physical therapy, with the highest number of Board Certified Specialists in the field. As part of the Confluent Health family, we’re committed to empowering the next generation of physical therapists. TexPTS is a member of the Confluent Health family of physical and occupational therapy companies. Together, we are transforming healthcare by strengthening private practices and developing highly effective clinicians all across the country.Voted “Best Places to Work” 2023, 2024 & 2025! 4+ star employer as rated on Glassdoor!Use the link to see what our team members are saying! https://www.glassdoor.com/Overview/Working-at-Texas-Physical-Therapy-Specialists-EI_IE785278.11,45.htmConfluent Health and Texas Physical Therapy Specialists provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Confluent Health and TexPTScomplies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.#CH500
Full Time
5/1/2025
Austin, TX 78759
(23.1 miles)
Overview: At Powerback, we're on a mission to improve lives. As the leader in physical, occupational, speech, and respiratory therapies, we help older adults stay active and thrive while providing essential therapy for children at home and in school.With over 38 years of trusted service, our reach spans skilled nursing centers, assisted and independent living facilities, outpatient clinics, and home-based care. We're proud to deliver personalized care exactly where and when it's needed most.Join an industry-leading team that restores hope and makes a lasting impact. If you're passionate about making a meaningful difference and want to be part of the future of rehabilitation and wellness, Powerback is the place for you.Why Powerback Benefits: We offer Medical, Dental, and Vision plans to Full-Time and Part-Time team members.Support for New Grads & Clinical Fellows: Our Powerback Clinical Mentorship Program kicks off on day one, helping you learn from the best in the field.Continuing Education: Keep growing with free CEUs through Medbridge.H-1B Visa & Relocation Assistance: We support Visa or Green Card sponsorships, plus our Journey Travel Program lets you work across the U.S. with the security of a full-time role.Perks at Powerback: Enjoy exclusive discounts on Wireless/TV, Home/Auto/Renters and Pet Insurance, Childcare, Eldercare, and more. Earn rewards through our PowerZone Employee Recognition Program, and expand your expertise with our Clinicians in Action professional development program. Responsibilities: As a Speech Language Pathologist, you help patients get their power back. You are the person who can help people communicate, swallow, and work to diminish or remediate disorders or deficits. In doing this, you take responsibility for the effective and efficient delivery of rehab services, you design the plan, and work with patients to execute those plans.You're a healer and a helper, which is why you got into this line of work.You're equally adept at addressing the whole patient and seeing them as an individual, and you know your goal is the design of a program that will restore, reinforce, and enhance their speech and communication abilities.You're adaptable to the needs of the patient and can find joy in the variety of the work and the settings. From cleaning equipment to reporting to meetings, you thrive in a setting that keeps you moving through your day.You're a teammate and are looking for collaboration with your peers, but you're also happy to make referrals to help your patient get the care they need to thrive.You know that being a Speech Language Pathologist means you're a teacher who can train patients and caregivers on the skills they need to promote independence and productivity.If this sounds like you, we'd love to meet you! Qualifications: Qualifications1. A Master's degree in Speech-Language Pathology, Communication Disorders, Communicative Disorders or similarly-titled area that is consistent and acceptable to the American Speech-Language-Hearing Association. 2. A Certificate of Clinical Competence from the American Speech-Language-Hearing Association (ASHA) or be eligible to participate as an ASHA Clinical Fellow. We will also accept candidates who are eligible to obtain the Certificate of Clinical Competence.3. Licensed, certified or credentialed, as required in the state of practice. Posted Salary Range: USD $43.00 - USD $48.00 /Hr.
This website uses cookies for analytics and to function properly. By using our site, you agree to these terms.