We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Pay Rate: $15.00/hr - $25.73/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

An instrument repair cleaner's job is to detail and clean rental instruments and prepare them to return to stock in a timely and proficient manner. Essential Functions (not all-inclusive): Detail and clean instruments in a timely manner based on production standardsReport quality control rejectsPerform general warehouse and distribution tasksOther duties as assigned About Music & ArtsMusic & Arts embodies the world of creativity and music by encouraging our teammates to find their own individual sound. We strive to create lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the almost indescribable happiness that comes from playing an instrument. We believe in putting our customers first, engaging with respect and integrity and fulfilling our mission with passion.The first Music & Arts was located in a small house in Bethesda, MD and run by founder Benjamin O'Brien. When Music & Arts opened its doors in 1952, we offered printed music, music lessons, dance lessons, and art supplies. Ben decided shortly after opening his business that he wanted to focus on music to better serve his customers -- a decision that remains intact to this day.Since the 1990's, Music & Arts has expanded nationwide through organic growth and a series of acquisitions and mergers with other music dealers. In 2005, Music & Arts joined forces with American Music to become the largest band and orchestra instrument retailer in the United States. Based in Frederick, MD, Music & Arts is now part of the Guitar Center enterprise and comprises 225+ retail stores, 200+ educational representatives, and 250+ affiliate locations.Tojoinourband,you'llneedthefollowingexperience: High School Diploma or GED required. Pay Rate:$15.00/hr The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. Lovethisgigandwanttoapply Send your resume and cover letter today along with salary expectations!Music & Arts is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job- related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Company:US3063 Sygma Pennsylvania (The Sygma Network, Inc)Sales Territory:NoneZip Code:17110Travel Percentage:0COMPENSATION INFORMATION:The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factorsJOB SUMMARYTo provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability.MONDAY TO FRIDAY 11:00PM TO 7:30AM$27.00 TO $35.00 PER HOUR BASED ON EXPERIENCE$600 ANNUAL TOOL ALLOWANCERESPONSIBILITIESPerform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet.Perform FAI/CVI (First Article Inspection/Commercial Vehicle Inspection) (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment by all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies).Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment.Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment.Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer).Address all Driver Vehicle Inspection Report write ups timely, and efficiently.Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems.Follow procedures including documenting all work performed on work orders.Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility.May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible.Proficient in electrical meter testingKnowledge of controls and electric (DC low voltage)Electric motor knowledge (DC)Complete electrical repairs and welding projects as needed.QUALIFICATIONSEducationMedium/Heavy Duty truck technical training 2-year schoolHigh school diploma or GED requiredExperience4 years of experience OR5 years of experience in fleet maintenance and repairCurrent and valid driver’s license (CDL Preferred, Not Required)Professional SkillsAnnual Inspector Certification Knowledge, Skills and AbilitiesBrake Inspector Certification Knowledge, Skills and AbilitiesASE certifications – Automotive or Medium/Heavy Duty Trucks (preferred not required)EPA section 608 (Core & Type II) and 609 HVAC – Refrigeration CertificationWorking knowledge of computer-based diagnostic software for OEM’s and component manufacturersExpert knowledge and skill of all vehicle systems and componentsExpert knowledge and skill in diagnosis and repair of electrical systems on all equipmentExpert knowledge and skill in diagnosis and repair of refrigeration systems (Expert knowledge and skill in Preventive Maintenance Inspections and repairModerate knowledge and skill in welding and cutting (gas, electric, MIG, TIG)Moderate computer skills and knowledgeExpert knowledge of all DOT (FMCSA) regulationsModerate knowledge of OSHA safety regulationsModerate knowledge of environmental regulationsPhysical DemandsRegularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear.Frequently required to climb, balance, stoop, kneel, crouch, bend or crawl.Occasionally required to sit and must frequently lift and/or move up to 100 lbs.Requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.Ability to operate various pieces of equipmentAbility to stand, sit, walk, bend, reachAbility to push/pullAbility to lift /carryAbility to grasp toolsAbility to perform Repetitive motion: wrenches and hand toolsWorking conditions: Frequently works outdoors.Work EnvironmentOccasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces.Works non-traditional business hours including evenings, nights, weekends, holidays and on-call.Occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.).Occasionally exposed to high, precarious places and confined spaces.Occasionally exposed to fumes or airborne particles.The noise level in the work environment is usually moderate.BENEFITS INFORMATION:For information on Sysco’s Benefits, please visit https://SyscoBenefits.comOVERVIEW:Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations.We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service.AFFIRMATIVE ACTION STATEMENT:Applicants must be currently authorized to work in the United States.We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law.This opportunityis available through Sysco Corporation, its subsidiaries and affiliates.

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least five (5) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more. Mechanical Maintenance TechnicianPRIMARY PURPOSE OF POSITIONThe position will be within the Mobile Turbine/Rotating Department and is responsible for performing all general mechanical maintenance on power plant equipment. The Mobile Turbine/Rotating team supports a culture of continuous improvement by participating in training, reinforcing standards, reporting, and mitigating unsafe or undesirable conditions, and utilizing the corrective action program. This position regularly requires 80% travel.PRIMARY DUTIES AND ACCOUNTABILITIESPerform maintenance and repair work on plant equipment such as pumps, gearboxes, fans, turbines, bearings, boilers, pipe systems, valves and limit torque operators. (disassembly, part repair or replacement, assembly) using sound technical decisions regarding maintenance on complex mechanical equipmentDemonstrates strong maintenance skill on steam or gas turbines, turbine valves, reactor feed pump turbines (RFPT), terry turbines, various pumps, balance of plan (BOP) equipment in a safe and reliable manor using the correct tools, equipment such as rigging, fork trucks and cranesPerform assigned tasks in a safe and efficient manner at the direction of Maintenance Management.Ability to work on cross-functional teams on major projects while adhering to the conduct of maintenance and established maintenance standards and practicesPerform alignment on Rotating equipment. Perform fitting and welding tasks when qualified.Execute work package when assigned to the level of training received.Use, review and recommend revisions to procedures, prints, technical manuals and other documents as required to the level of training received.Provide technical support to plant operations, maintenance staff and engineering to the level of training received.Interpret and understand power plant prints.Perform verification checks on maintenance items covered in maintenance technician training.MINIMUM QUALIFICATIONSAssociates Degree in Power Plant Technology, Engineering Technology, or Electronics with minimum of 18 months of trade or technical training in Power Plant Technology OR 3 to 5 years' experience in Maintenance Tech I or equivalent years of experience with trade or technical training in Power Plant Technology or relevant field experienceSuccessfully complete the training requirements and time in job requirements for the position including previously passing the MASS testAcquire and maintain unescorted access to Nuclear facilitiesValid driver's license and access to an insured vehicleAbility to lift a minimum of 50 poundsAbility to work in a power plant environment that includes climbing and walking long distancesExposed to heat with reduced stay times, dust, smoke, dirt, high noise areas, confined and cramped work areas, and a nuclear power plant environment including Radiation Dose Exposure.Works at high elevations on ladders and scaffolds.Works shift work or weekends as required. Perform tasks inside radiological controlled areas.Maintains nuclear qualifications IAW EIS Specific training program.Maintain Radiation Protection Qualification and training, including respirator qualificationsAbility to obtain unescorted nuclear plant accessBasic computer skillsGood oral and written communication skillsThis position regularly requires > 80% travel within the nuclear plants PREFERRED QUALIFICATIONSPrevious trade union experience (millwright or pipefitting)Welding qualificationsMachinist experienceHourly rate $32-$54

Build your best future with the Johnson Controls team!Who We Are:YORK® Chiller Solutions from Johnson Controls, help customers respond to building efficiency needs by providing the widest variety water and air-cooled industrial and commercial chillers on the market. From reducing a facility’s carbon footprint, to delivering a healthier indoor environment and cutting energy costs, we build smaller, more energy efficient chillers tailored to fit almost any comfort or process cooling application – even heating. This role will be based in the Johnson Controls Advanced Development Engineering Center (JADEC) in New Freedom, PA. Candidates must be located within a commutable distance from the facility or be willing to relocate. Get excited!...take a look at where you'll work. Johnson Controls Advanced Development and Engineering Center (JADEC)What We Offer:Competitive salaryHybrid work opportunity (upon the completion of training)Paid vacation/holidays/sick timeComprehensive benefits package including 401K, medical, dental, and vision care– available day one!On the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do:This position is within the water-cooled chiller product engineering team. We are seeking a senior engineer to work on chiller PLC control solutions for both new product and chiller retrofit opportunities. The role would focus on both software and hardware solutions for chiller PLC products. As Senior Engineer within our Chillers product development team, you will be responsible for electrical analysis, detailed design, and control, as well as overall electrical performance of sophisticated water-cooled chillers components and systems, including providing support to manufacturing and applications engineering. In this role you will work on control systems for new industrial chiller applications as well as retrofits, hardware design, design test and sustain control panels and system wiring.How You Will Do It:Develop and maintain electronic hardware and software (temperature sensors, pressure sensors, flow sensors, and A-B software).Design of analog and digital interface circuits, development of power supply circuits and/or selection of power supplies.Perform the worst-case circuit analysis and incorporation of appropriate reliability principles to ensure reliable operation over the environmental specifications.Assist chiller team to develop, test and support chiller system controls (This includes selection of system components and accurate interfacing of them to electronic control panel I/O). Acquire agency approvals such as UL, CE and FCC on Printed Circuit boards and Electronic Panels.Independently conduct and apply costing analysis to feasibility studies on proposed designs or modifications to existing designs.Develop schedules which accurately reflect the project breakthroughs and implement to them.Integrate new and modify existing processes to cover all phases of the electronic development process.Provide mentorship and support to:Drafters and DesignersService and Field TechniciansManufacturing on Commercial Systems products.Provide mentorship to drafters and support Service and Manufacturing on Commercial Systems products.Prepares and participates in design reviews.Learns and applies regulatory codes such as UL, NEC, CSA, and CE codes.Proficient at capturing and analyzing test data to identify electrical performance problems and propose solutions for corrections.What We Look For:RequiredBSEE,BSEET, BSEMET,or related fieldPreferred candidate to have 5 years of valid experience with one or more of the following.PLC programming and troubleshooting.HVAC systems and controls.Automation control systems.Electrical systems, wiring diagrams, and troubleshooting (24VDC, 120VAC, & 240VAC).Ability to work in a fast-paced, schedule driven, team-oriented environment.Ability to program and debug PLC programs.Ability to identify obsolete parts for PLCs, HMIs, Network switches and protocol translators for customer upgrades.Provides secondary level product support to the field after product technical support resources are exhausted for PLC applications.Experience with Allen Bradley PLCs and Rockwell software (rslinx, FactoryTalk, Studio 5000, Activation Manager, etc.).Good verbal and written communication skills are required.Must be willing and able to travel domestically and internationally as required (up to 10% of time).PreferredUnderstands chiller controls.Familiarity with HVAC Systems and motor driven mechanical engineering design and test, alternative experience with gas compression would be advantageous.Chiller PLC experience.#Hybrid#ElectricalEngineer

Position Title: Carpentry Maintenance Mechanic 1Location: Baltimore, MDPosition Type: Full-Time, Dayshift , 40 hours WeeklyPosition Summary: Performs maintenance, repair, fabrication, installation, and modification work on buildings/components, offices, corridors, etc. Under general supervision, this work is performed using the tools and techniques of carpentry technology.Requirements: 5 years related work experience, including 2 years experience in metal framing, drywalls and all types of floorings and ceiling applications. The full-time equivalent spent in a state-approved program may count toward the 5-year work experience requirement.Benefits:https://www.hopkinsmedicine.org/human-resources/benefitsSalary Range: Minimum 0.00 per hour - Maximum 0.00 per hour. Compensation will be commensurate with equity and experience for roles of similar scope and responsibility.In cases where the range is displayed as a $0 amount, salary discussions will occur during candidate screening calls, before any subsequent compensation discussion is held between the candidate and any hiring authority.JHM prioritizes the health and well-being of every employee. Come be healthy at Hopkins! Diversity and Inclusion are Johns Hopkins Medicine Core Values. We are committed to creating a welcoming and inclusive environment, where we embrace and celebrate our differences, where all employees feel valued, contribute to our mission of serving the community, and engage in equitable healthcare delivery and workforce practices.Johns Hopkins Health System and its affiliates are drug-free workplace employers.

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $35 - $45 hourly depending on experience.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: ResponsibilitiesThe HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: Qualifications5+ years of commercial experience as an HVAC and Refrigeration TechnicianRack experience a plusEMS Controller experienceActive EPA CertificationValid driver's licenseExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift up to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

MAINTENANCE TECHNICIAN Baltimore, MD LEVINDALE HOSPITAL PLANT OPERATIONS Full-time - Evening shift - 3:00pm-11:30pm Support Services/Security/Trade 89400 $17.46-$27.29 Experience based Posted:YesterdayApply NowSave JobSaved SummaryJOB SUMMARY:Performs routine scheduled and unscheduled maintenancePosition is on the evening shift but trainingis on the day shift (up to a month)JOB REQUIREMENTS:HS Diiploma/GED preferred1 to 3 years of commercial/hospital maintenance experienceOn call rotation (weekends included in on call rotation) Every 5 to 6 weeks when fully staffed. Must be available for unexpected emergenicesHoliday rotation (at least one holiday per year)Position is on the evening shift but trainingis on the day shift (up to a month)MD driver's license and good driving record preferredAdditional InformationAs one of the largest health care providers in Maryland, with 13,000 team members, We strive to CARE BRAVELY for over 1 million patients annually. LifeBridge Healthincludes Sinai Hospital of Baltimore, Northwest Hospital, Carroll Hospital, Levindale Hebrew Geriatric Center and Hospital and Grace Medical Center, as well as our Community Physician Enterprise, Center for Hope, Practice Dynamics, and business partners: LifeBridge Health & Fitness, ExpressCare and HomeCare of Maryland. Share:Apply Now

Compensation Details:$15.40- $19.20 - $23.00Why should you join our team We live our values - W.E.L.I.G.H.T (Winning, Excellence, Love, Integrity, Gratitude, Humility, and Teamwork). Gratitude. Humility. Love. You don’t often see values like these in most corporate statements, but Ace is different. These things are important to us. They represent our commitment to the company, our employees, to Ace retailers and to the Ace brand.In addition to providing our employees a great culture, Ace also offers competitive benefits* that address life’s necessities and perks, many of which expand and improve year after year, including:Weekly PayPaid Time Off Programs (incl. vacation, paid sick time, holiday pay). Newly hired full-time employees will receive a one-time pro-rated allocation of up to 24 hours of vacation in their first calendar year depending on the month of hire. Paid sick time in accordance with applicable state law. You will receive up to 9 holidays per year, depending on the month of hire.Comprehensive health coverage (medical, dental, vision and disability – up to 26 weeks short-term disability and long-term disability) & life insurance benefits for you and your dependents.Generous 401(k) retirement savings plan with a fully vested matching contribution the first year in addition to quarterly contributions and annual discretionary contribution (once eligibility requirements have been met). Over the past 5 years, company contributions (matching, quarterly & discretionary) for fully eligible employees have averaged 9.6% of total eligible compensationDock to Driver Program: Ace will pay for your CDL License and Training to provide a career path transition to a Driver positionLong-term Career Opportunities:Many of our leaders started with Ace looking for a job, just like you, but found long-term career opportunities at our 15 Distribution Centers across the country and our Corporate Headquarters.Our company is growing, and we would love to have you grow with us!Tuition Reimbursement ProgramEmployee Recognition ProgramMerchandise Discounts on Top Brands like Weber, Traeger, Yeti, Craftsman, DeWalt and thousands more!Employee Assistance Program (EAP) – access to free visits to therapists and lawyers, guidance on financial matters, elder and childcare, and assistance with tickets to entertainment events.Adoption cost reimbursementIdentity theft protection* Benefits are provided in compliance with applicable plans and policies.Job Description:Schedule:Sunday through Thursday 6:00am to 2:30pmWhat You’ll DoKnowledge of machines and tools, including their designs, uses, repair, and maintenance.Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices.Perform routine preventive maintenance or repair to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.Inspect, operate, or test machinery, equipment, or systems to diagnose machine malfunctions.Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary.Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment.Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists.Record type and cost of maintenance or repair work.Ace Hardware is committed to promoting and maintaining a safe, healthy and injury-free environment for all team members. This is our number one priority, and we will support programs and initiatives that focus on this commitment. It is critical that all team members take responsibility for their safety as well as the safety of others to ensure that Ace Hardware is a world class safety organization.What you need to succeed:Be a safety champion by promoting a safe and productive workplace through your own actions, including the proper use of PPE, safe operation of powered equipment and safe lifting techniques as determined by the role.Be an active participant in contributing to a successful safety culture in the facility.High school diploma or GED equivalent preferred.Must be at least 18 years of age.Ability and willingness to work non-traditional shifts and hours.Experience with general maintenance/ electrical duties preferred.Have general knowledge of conveyors systems, and ability to trouble shoot.Ability to CMMS and good computer skills for utilizing PM Software system.Maintenance experience within a manufacturing/ distribution environment.Want to be notified when new jobs are posted Follow the link below to create an account and set up custom job alerts:Create Job AlertWe want to hear from you!When most people think of career opportunities with Ace Hardware, they often think of the helpful cashiers and sales associates at their local store. However, have you also considered the people behind the scenes who select, promote, ship and process the invoices for more than 75,000 products Maybe you haven't, but we'd like you to. Because together we help our customers take care of their homes. Come find out why a career with the Ace Hardware Corporation is one of America's best kept secrets.Equal Opportunity EmployerAce Hardware Corporation is committed to a policy of promoting equal employment opportunities. The company recognizes the importance of diversity and leveraging the skills and talents of all people to the mutual advantage of each individual and the organization. The company is committed to the prevention of employment discrimination related to race, religion, color, sex (including sexual harassment), gender identity, national origin, age, marital status, disability and military or veteran status, sexual orientation or any other action covered by federal or applicable state/local laws.DisclaimerThe pay range for this position starts as listed in the job posting, but could be higher based on education and experience. Please note, compensation decisions are dependent on the facts and circumstances of each opening. We take into consideration the minimum requirements outlined in the job description, such as an individual’s education, training and experience, the position’s work location, required travel (if any), and external market conditions when determining the final salary for potential new hires. Be aware that salary estimates published via alternate online job boards may not be a true representation of the actual pay range offered for this position. Please refer to the Ace position description for the accurate starting pay range information and feel free to discuss this with a Talent Acquisition professional if you are chosen to move forward with an interview. This written “Position Description” is not intended to cover all aspects of the position listed. It is meant to cover the basic/general essential job functions of a particular position. Ace Hardware Corporation reserves the right to change job duties, including essential job functions, according to business necessity.It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or .Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters.Job Location: Camp Hill, PA Job Type: Full TimeShift(s) Available: 1st & 2ndCompensation: $21.75/hrBenefits InformationMedical, Dental, Vision, and Prescription Drug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Principal AccountabilitiesWorking in a wet or humid environment in cold temperatures and around heavy machineryLifting, stretching, standing or sitting for long periods of timeSafely operate a forklift and/or pallet jack to stage finished goods in proper floor locations toawait shippingLoading wrapped pallets into designated truckUnloading totes/pallets as needed for productionScanning all totes/boxes to be shipped, recording physical counts and wrapping pallets to beshippedInspect pallet jack/High-Reach to ensure is in good working conditionsEnsure that all food safety procedures and practices are being followedEnsure that all safety procedures and practices are being followedEnsure you are wearing proper personal protective equipmentRequired QualificationsMust be eligible to work in the United States without Visa sponsorshipMust be 18 years or olderMust be able to operate a high reach truck/stand up forkliftMust be able to operate an electric pallet jackAbility to read, write, and speak EnglishBe sure you are following proper lifting proceduresAbility to lift, stretch, stand and sit for long periods of timePreferred QualificationsPrevious experience on a high reach truckPrior work history in a fast-paced production environmentPlease note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/VetTo apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Our Veterinary Clinic Assistants help bring our Vet Clinics to life by interacting with Pet Parents as well as supporting the Veterinarians. The role includes safely retraining animals, dispensing and labeling medication as well as assisting pet parents with product recommendations and facilitating check out process. PetIQ provides convenient and affordable pet health and wellness products and veterinary services to pets and their families through retail and ecommerce channels across the country. We are advocates for pet parents, because we believe that all pet parents should be able to provide necessary care that enhances the lives of their pets. Why join the PetIQ Team Great company cultureCompany is in growth mode, come be a part of our exciting growth Job Overview Collect payment, dispense and label medication, and review discharge paperwork with pet parentsSafely restrain / hold pets for wellness procedures including vaccines, nail trims and microchippingCollect and prepare blood and fecal samples for laboratory testingDrive vans to and from clinics responsibly; load and unload the vans upon arrival anddepartureMake recommendations for services and products to every pet, every time, based on the pet’s lifestyle and an understanding of canine and feline diseasesMaintain a clean and sanitary work environment by disinfecting surfaces and equipment between each petAbility to execute inventory processes by maintaining accurate product counts and managing expiration dates for vaccines and productsPromote a culture of safety in your clinic and live our values while reinforcing our brand promise with pet parents, partners, and team membersProvide customer service to pet parents by answering questions and assisting them through the clinic processAchieve goals as set by your manager including dollars per pet, pets per clinic, preferred product and microchips soldScan pets for microchipsPrepare canine and feline vaccinesEstablish and maintain effective relationships with pet parents and partnersOther duties as assigned Minimum Qualifications: Must be 18 years of age or olderValid driver’s licenseMust be able to work weekends, varied weekdays and times, occasional overnightsReliable transportation to and from workPresent professional appearance and positive conductPunctuality and dependability highly valuedMust be able to drive a company vehicle for long hours and in various terrain and weather conditions. Portion of workday spent in vehicle.Some outdoor clinic work and activities may be necessaryMust be able to work for prolonged periods of time in the field, including 12–14-hour days Education Requirements: High School Diploma or equivalent required Preferred Qualifications: Previous customer service sales experience Navigate computer software (iPad, Bluetooth devices and more)Strong organizational, problem-solving, and analytical skillsAbility to work within a team to meet team goals and objectivesComfort level in approaching host location’s customers to educateabout our clinicsAbility to adapt to changing priorities Physical Requirements: Ability to perform the essential job functions consistently safely and successfully with the ADA, FMLA and other federal, state, and local standards, including meeting qualitative and/or quantitative productivity standardsAbility to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state, and local standards - Must be able to lift and carry up to 50 lbs.

COMPANY SUMMARY: SPATCO Energy Solutions has been the leader in the fueling infrastructure industry since 1935 We provide a complete line of equipment and services for storing, pumping, mixing and measuring petroleum and industrial liquids Our customers come from a variety of industries including retail fueling stations, commercial and government fleets The services we provide to our customers and the community is essential and we are growing! SPATCO currently operates 17 branches with a dedicated training facility in North Carolina and growing service satellites throughout the Southeast Our goal is to provide top notch customer service Our experienced technicians are committed to customer service excellence which will advance them and SPATCO in the petroleum industry Even as an experienced technician you will receive updated training and certifications to help advance your career in the Petroleum industry Our experienced service technicians will work side by side with branch managers, dispatchers and other experienced technicians and trainees The growth of SPATCO and its employees depends on our ability to service our customers by working as a team This may include being paired with a trainee to assist them in completing their training and certifications This position does not work a typical 85 shift, hours may vary based on workload and customer need Responsibilities: Troubleshoot and repairs gasoline dispensing units (such as: Gilbarco, Dresser Wayne, Gasboy, and Bennett) Troubleshoot and repair of electronic POS (PointofSale) Systems (such as: VeriFone, Gilbarco and NCR) Install, program and tests new petroleum equipment Analyze electrical and mechanical problems and provide repairs as required Perform scheduled repairs and preventative maintenance to fueling systems Communicate with customers and explain technical issues in a nontechnical manner Experience, Competencies and Education High School Diploma or GED Valid State Issued Driver's License and good driving record At least 2+ years' experience troubleshooting, repairing and maintaining gasoline dispensing units including dispenser hydraulics and submerged pump units Hold valid dispenser certification(s) Ability to work outdoors in all types of weather; daily local travel;

Securitas Healthcare, part of Securitas, empowers caregivers to deliver connected, productive and safe care. Its innovative portfolio of healthcare solutions helps over 15,000 hospitals, clinics and senior living organizations worldwide protect people, use assets efficiently and understand their operations for a caring and healing environment. For more information, visitwww.securitashealthcare.comPosition SummaryThe employee will be remote and live in the Baltimore, MD or Washington DC vicinity primarily supporting the Eastern region of the US with flight travel to other locations as needed. Will drive or fly to customer locations to provide on-site installation and support to clients using Securitas Healthcare products. Will be responsible for installing low voltage systems that are used in long-term care healthcare facilities. Understanding of network connectivity and software configuration troubleshooting will also be necessary. Will be required to provide training on products to end-users as needed. Essential Job FunctionsRepresent and support the Company in the field, through pre-sale site surveys, equipment installations, repair or replacement, and customer training, according to Company schedules, procedures, and standards.Install, configure, and commission new systems by following company procedures and processesPerform service work at customer sites including troubleshooting, repair, or replacement of customer equipmentVisit facilities to perform preventative maintenance by inspecting installed equipment and making repairs as neededComplete facility site surveys to determine usability for products manufactured and/or sold by the CompanyProvide training to facility personnel to show the correct operation and maintenance of installed equipmentPerform administrative duties including writing facility visit reports, completing service or post-installation checklists, creating and submitting expense reports, and maintaining accurate inventory of equipment and parts on a company vehicleAttend construction meetings when needed to help ensure that installations that are part of a new construction or renovation project go as plannedParticipate in an on-call rotation to help cover for emergency repairs on weekends or holidaysThis is a customer-facing role. The candidate must have strong customer service skills in order to clearly communicate with the customer and colleagues in the field and at the office in order to ensure that customers are satisfied following each project.Must have time management skills in order to arrive at sites when planned and to finish all work in the time allotted for each project. Knowledge of use and basic configuration or troubleshooting of PC systems requiredMust be able to use hand tools and operate basic handheld power toolsMust be able and willing to work alone and stay in contact with the office as scheduling requirements changeMust be ableto lift up to 75 pounds in some instancesMust be able to climb and stand on ladders for extended periods of timeRequired to stand in and crawl through tight spaces occasionally under extreme temperatures (attics, crawl spaces, utility access, etc.). Crawl space access may be as small as 16”Must have the ability to travel extensively, overnight, on a regular basis (up to 100% of the time)Other duties as assignedRequired QualificationsHigh School Diploma or GEDValid Driver's License with no restrictions2+ years of experience with installing or troubleshooting low voltage systems including security systems, access control systems, door controllers, elevator controllers, relays, etc.Ability to obtain required State licensing needed to successfully perform the rolePreferred QualificationsHold VA DCJS license and MD Security Systems Technician licenseAn associate degree in Electronics or a related fieldWiring, cabling, and/or security or access control system installationField service experience traveling to multiple customer job sitesSome experience in customer training preferredExperience supporting or installing systems that use radio technologyExperience with data networkingWe are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Summary: Operate and maintain press to production standards and quality. Set-up, adjust and operate equipment to print and fold signatures, ensuring expectations of customer specifications. Duties/Responsibilities: Review job jackets and plan work process to ensure meeting of customer specifications Monitor assigned press machine during run to ensure adherence to specificationsPerforming quick and efficient make-readies, product size changeover and folder changeoversPerform preventative maintenance and troubleshoot machine problems, resolving if possible, notifying GPS or Print Process Manager as neededProvide training, as required, to Assistant in machine operation and safetyComplete and maintain all required paperwork, job jackets, records, documents, timekeeping, etc. Follow all required safety procedures such as: PPE’s, Ergonomics, and etc. Performs job in a manner that protects the health and safety of all employees. Assist with housekeeping in the Press areaOther duties as assigned Basic Qualifications: High School Diploma or GEDStrong math and mechanical skills.Ability to effectively communicate with other employees Desired Skills and Abilities: Previous Press experience is preferredKnowledge of a variety of small hand tools and precision measuring devices is preferred Physical Requirements Ability to frequently transport and position materials weighing up to 65 pounds CJK Group is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. #SPA24

Description Unleash Your PotentialAt Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer’s success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.If this sounds like an environment where you can thrive, keep reading!We are in search of a Senior Network Installation Technician at the customer site at Fort Meade, MD and will require travel.Our Opportunity:The Defense Enclave Services contract will unify the DOD Fourth Estate Defense Agencies and Field Activities’ common use information technology systems, personnel, functions and program elements under the direction of DISA’s Fourth Estate Network Optimization program office. This technician will support a large federal agency’s Network Infrastructure through survey, design, and deployment of structured networks and will be responsible for the upkeep of the security posture of the environment. This is accomplished through projects such as new installations, life cycle replacement projects, Cable Plant and wireless installations that are compliant with commercial, TEMPEST, and NIST standards.Clearance Requirement:•Must hold an active Top Secret security clearance and be able to obtain a TS/SCI. (US Citizenship required)Key Responsibilities:•Lead network survey, design and installations under direction of the government.•Conduct Site Surveys of customer premise networks in CONUS and OCONUS locations.•Create detailed Site Survey reports detailing a site’s current infrastructure, NIST and TEMPEST compliance, along with design recommendations.•Configure, install, test, certify, and troubleshoot network infrastructure cabling.•Ensure Network cabling infrastructure is compliant with current NIST and TEMPEST Standards.•Build and install equipment racks.•Install, dress, label, and terminate Cat6 and Fiber cable in telecommunications rooms.•Test and troubleshoot network infrastructure issues on SIPR and NIPR networks.•Create accurate reports and documentation to design/certify network infrastructure.•Track, manage, and ensure project tasks are completed in a timely manner.•Develop Bills of Material (BOM) for network plant design requirements.•Plan and perform preventive maintenance and scheduled upgrades (Life-cycle replacements)•Investigate physical faults in the network.•Report network infrastructure deployment status to key stakeholders.•Have flexible working hours to be available to support off hour work, when needed.Must have’s:•Bachelor’s degree and 4 years of relevant experience; additional years of experience may be substituted in lieu of a degree.•Understanding of ANSI/TIA-568 and 569 standards.•Requirements of Protective Distribution Systems (PDS) for Classified Systems as directed by Security and/or the Certified Tempest Technical Authority (CTTA).•Knowledge of National Security Telecommunication & Information Systems Security Instruction (NTISSI) 7003.•Knowledge of DISA network topologies and standards.•Topology and rack elevations using Visio.•Experience with various OTDR, cable testers, and network sniffers to develop reports for infrastructure certification documentation.Nice to have’s:•BICSI certification.•Sec+ certification.DISADESExternal Referral EligibleOriginal Posting:April 9, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $72,150.00 - $130,425.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Featuredjob

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America or JPMorgan Chase among other leading organizations in the Baltimore area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Business Operations - Project Management - Banking - Customer Success - IT Support - Data Analytics Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

Shift - Tuesday thru Friday 5 AM - 3 PM, OT as neededWhat this job involves - The Maintenance Mechanic - 2 is involved in the performing both preventative maintenance and corrective maintenance on multiple plumbing and piping systems. This position requires a high level of technical expertise with a variety of building infrastructure. Involved in campus' repairs, protects and beautifies various interior and exterior surfaces and various components of the physical structure of building in client facility providing painting and Carpentry work. Technician will be performing both preventative maintenance and corrective maintenance on multiple interior and exterior surfaces. The position may be called upon to perform other general maintenance and support duties on an as-needed basis.What is the day to day Assist Instrumentation and controls tech in troubleshoot and correcting deficienciesInvolved in performing repairs, P.M. and install new piping and valves relating to building steam and water piping/plumbing systems; determine frequency of repair and/or P.M. of systemsRequires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as requiredUnderstands the engineering design and operational aspects of the building and critical support systems and components. Must be able to immediately recognize system shortcomings, troubleshoot and respond to operational and emergency situationsMonitors operation and maintains heating and cooling valves, water cooling equipment; boilers, heating and hot water equipment; pumps, valves, piping and filtersPosition will be called upon to review logs to ensure proper operation of equipment; responsible for reporting any problems/malfunctions on an as need basisChecks malfunctioning equipment and ascertains corrective action required to restore to satisfactory operating conditionInstall, operate, maintain, troubleshoot and repair machinery and mechanical equipment such as pumps, fans, and rotating equipmentPerform rigging/moving of equipmentSupport the maintenance, repair and operation of site rotating equipment including but not limited to HVAC equipmentOccasionally support the repair plumbing components including toilets, urinals, lavatories, flush valves, water fountains, sinks, drains, water heaters, piping, and sump pumpsProvide all other building maintenance, repair, and restorative procedures as directedAssist the operations team in the maintenance and repair of building and equipmentMachine room and area inspectionsRespond to urgent requests as directedEnsure that work is performed efficiently with a minimum amount of disruption and inconvenience. Track completion rate and outstanding work orders. Drive team efficiency and provide oversight and support as neededPrioritize all PM’s, corrective and emergent work orders for the site (annual, monthly, weekly, and daily). Schedule and assign work to individuals with the assistance of the work order scheduler/plannerMaintains a clean and safe working environment. Identifies and remediates all Environmental Health and Safety (EHS) issues as they ariseWork with the client to schedule equipment to be taken off line so that preventative maintenance can be performed with minimal impact to the end users.Confers/communicates with work order requestorsCoordinates with client representatives to understand their needs and ensure the work scheduled takes into account the operational windows for repairDesired experience and technical skills - Required4+ years of experience in commercial or industrial facilities maintenanceHVAC certification (Journeyman or Apprentice)EPA Universal CertificationExposure to piping/plumbing systems, mechanical systems, and boiler controls/operation.Excellent written and oral communication skills.Able to work in a customer service environment interacting with the client.Able to stay on task and work independently with minimal direction and supervision.Manages competing priorities well.Ability to analyze and make decisions based on broad range of data.Proficient in basic computer application software such as MS Office, Outlook, CMMS (Maximo), etc.PreferredExperience in controlled working environments, a plus.Physical Work EnvironmentAble to adequately perform required job functions.Able to lift, bend, and move in such a way as to perform job tasks in a safe and approved manner.Able to operate required hand/power tools, test instrumentation and equipment required by this trade in a safe and approved manner.Able to lift 50lbOverhead work / working at heights required#MMjobs

*Wednesday-Saturday 8pm-6am *About the RoleAs a Maintenance Technician, you will promote workplace efficiency and profitability by maintaining, inspecting and repairing facilities, equipment and machinery. What You’ll DoDaily inspection and repair of all conveyor systems and equipmentRoutine inspection, preventative maintenance and maintenance of air compressors, generators, compactors, bailers, conveyors and power and material handling equipmentPerform inspection and repair of fire protection equipmentParts administrationPerform minor electrical and plumbing repairs, painting and office furniture movesPerform routine maintenance on heating and air conditioning unitsMaintain lighting throughout the facilitySort, stack and load pallets, cardboard, aluminum, steel and light bulbs for recyclingAssist outside contractors in performing various dutiesPromptly answer calls for jams, malfunctions or other maintenance-related issuesWhat Skills You HaveRequiredBasic knowledge of mechanical, electrical, plumbing and HVAC equipmentCompliance with all MSDS standards and lock-out/tag proceduresAbility to climb ladders and run all power equipmentAbility to work with minimal supervisionMust provide own basic set of toolsAbility to use cleaning and disinfecting solutions, oil and equipment according to MSDS procedurePay Range: $24.20 - $38.70Kohl’s offers a variety of benefits to associates depending on full-time/part-time status and work hours, including: WORK LIFE BALANCE (PTO, Vacation Buy Program, Parental Leave), HEALTH & WELLNESS (Medical, Dental, Vision and other short and long term disability programs, Emergency health and wellness programs such as Accident Protection Plans, Critical Illness Plans and more), SAVINGS & RETIREMENT BENEFITS (401k, Flexible Spending Accounts and associate discount programs with Kohl’s partners), INSURANCE PROGRAMS (Life Insurance for you, your family or your pet, as well as other protection programs), and LIFE EVENTS (Legal and adoption assistance benefits).

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:JOB DESCRIPTION- Trailer Technician Candidate will possess personal knowledge and skills to perform preventative maintenance on UPS Transportation Trailers and Converter Dollies.? Will properly diagnose and perform necessary repairs to non-power equipment, including air brake systems and electrical systems.? Candidate must be willing to work 2nd or 3rd shift.? Schedules include Monday through Friday and Sunday through Thursday and Tuesday through Saturday. An attractive pay and benefits package is offered. Uniforms are provided. Candidate must possess all personal tools required to perform the job and will be required to appropriate necessary hand tools as required by job assignment. Ideal candidate will possess the following:Current documented trailer mechanic experience Experience using diagnostic equipment, scan tools and personal computer Possess a full complement of personal hand tools Job ResponsibilitiesMeet D.O.T requirements Bend, stoop, squat, kneel, crouch, crawl, climb ladders and stairs, stand, walk, and turn/pivot frequently throughout the duration of the workday Full time: 8-10 hours per day, 4-5 days per 7-day week Report to work on a regular and timely basis and complete the scheduled workday on a consistent basis Ability to work varying shifts, additional hours and/or overtime depending on service needs Sitting required infrequently throughout the duration of the workday Lift, lower, push, pull, leverage and manipulate equipment and/or packages weighing up to 70 pounds Assist in moving packages or equipment up to 150 pounds Simple hand grasping, power hand grasping, fine hand manipulation, reaching from foot level to above shoulder level as necessary to complete assigned tasks Operate standard/manual transmission Operate power, pneumatic tools Required to wear personal protective equipment Must meet all requirements to be Power Industrial Truck Operations (PITO) certified Work in an environment with: variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather Work cooperatively in a diverse work environment Have a sufficient ability to communicate, through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions OTHER CRITERIAEmployer will not sponsor visas for position.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position is $37.36 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least one (1) to two (2) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

***Consideration given to applicants residing within a commutable distance to New Freedom, PA or willing to relocate***What You Will Do:Our Test Engineer will oversee product testing throughout the test life cycle. This includes designing, planning, execution, and preliminary analysis of results. The Test Engineer must possess and/or have the ability to develop a working knowledge of HVAC/R equipment and its application and has experience with component or system testing, test procedure development, mechanical fluid or airflow system design, troubleshooting, and operation. our Test Engineers are required to execute the testing for individual test subjects in order to successfully and efficiently complete testing for the product area customer. In this role you will conceive, develop, and evaluate plans for solving complex testing challenges. The ideal candidate will have technical aptitude in HVAC. This position is not eligible for Visa sponsorship.How You Will Do It:Provide technical communications for Test Engineering to product customer(s).Plan and execute tests of chillers and components. This may include:Participate in the development of and/or receive and review test specifications from customer group; seek out and acquire needs from other areas/disciplines who may wish to benefit from testing a particular subject.Use input from the customer group(s) to facilitate test plans and identify resource (human, physical) requirements.Meet with product engineering, product management, product technical support, or equivalent groups to agree upon and issue test plans.Work within the Test Engineering team to schedule tests and required resources with regards to capacity limitation.Provide oversight and input to Test Technicians for set up of data acquisition software configurations.Work with labor, test support, and engineering resources to actively manage the test from set up to completion. This includes daily monitoring and planning, communication, direct data acquisition, review of data acquired, provide engineering analysis of data acquired, problem resolution, and other activities necessary in order to efficiently perform and complete testing in a timely fashion.Maintain a proficiency in understanding chiller test data to guide the customer engineering teams as necessary to acceptance or assist in explanation of data results.Drive the evaluation and creation of standard procedures, test standards, and processes using applicable engineering tools. This includes, but is not limited to LEAN, 6-Sigma, Value Stream Mapping, Design of Experiments (DOE), 5S, Gemba, Kaizen (continuous improvement), KPI analysis and development, PDCA (Plan, Do, Check, Act), and Root Cause Analysis.Use experience to develop new procedures, processes, and resources as necessary to provide more efficient, accurate, and advanced testing services for product customers.What We Look For:BS required in an engineering or engineering adjacent discipline.Preferred combination education and experience, three (3) years direct work experience in the following: HVAC/R equipment development, servicing or testing, good understanding of HVAC/R systems, concepts, and diagnostics.Ability to perform test data acquisition and data analysis, test troubleshooting and diagnostics, technical reporting, and related communication at various levels is required.Experienced in environments ranging from laboratory, manufacturing/testing facilities, and field sites.Able to work in fast-paced, schedule driven work environment and possess the agility/adaptability to quickly move from one task to another when required. Must be self-motivated.Strong communication skills; willing to confront issues in an open, efficient, and tactful manner.Strong group communication and presentation skills.Demonstrated use of engineering tools and concepts within a manufacturing or testing facility.Good computer and data analysis/management skills with proficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint) as well as internet software and e-mail.Preferred:Familiarity in one or more technical and operational disciplines within HVAC platform development.Background in engineering or development testing.#TestEngineer#Hiring

MASTER MECHANIC Randallstown, MD NORTHWEST HOSPITAL MAINTENANCE Full-time - Day shift - 7:00am-3:30pm Support Services/Security/Trade 89281 $17.50-$36.57 Experience based Posted:April 25, 2025Apply NowSave JobSaved SummaryJoin a group of seasoned, supportive teammates in a clean and well maintained plant! Other benefits include regular infrastructure investment, robustrecognition program and team building events in a fun department!JOB SUMMARY:Under limited Supervision, installs, repairs, and maintains all physical elements of the institution to ensure a continued safe environment for all residents, staff and visitorsJOB REQUIREMENTS:Basic professional knowledge; equivalent to a Bachelor's degree; working knowledge of theory and practice within a specialized fieldFive years experience as a P.M. mechanic, maintenance mechanic, or three years experience in a mechanical trade such as H.V.A.C., pipefitting, engineering5-7 years experienceRotating weekly on call and weekend coverage every 7 to 8 weeks.Additional InformationAs one of the largest health care providers in Maryland, with 13,000 team members, We strive to CARE BRAVELYfor over 1 million patients annually. LifeBridge Healthincludes Sinai Hospital of Baltimore, Northwest Hospital, Carroll Hospital, Levindale Hebrew Geriatric Center and Hospital and Grace Medical Center, as well as our Community Physician Enterprise, Center for Hope, Practice Dynamics, and business partners: LifeBridge Health & Fitness, ExpressCare and HomeCare of Maryland. Share:Apply Now

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Competitive pay from $25 - $35 depending on experience.Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflow Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: 3+ years of commercial experience as a HVAC and Refrigeration TechnicianRack experience a plusExperience servicing kitchen hot side equipment and ice machines preferred.Active EPA Universal CertificationValid driver's licenseExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift up to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Cargill’s size and scale allows us to make a positive impact in the world. Our purpose is to nourish the world in a safe, responsible and sustainable way.We are a family company providing food, ingredients, agricultural solutions and industrial products that are vital for living. We connect farmers with markets so they can prosper. We connect customers with ingredients so they can make meals people love. And we connect families with daily essentials from eggs to edible oils, salt to skincare, feed to alternative fuel. Our 160,000 colleagues, operating in 70 countries, make essential products that touch billions of lives each day. Join us and reach your higher purpose at Cargill.Job Purpose and ImpactThe Maintenance Supervisor will coordinate the deployment of leading maintenance practices in alignment with production needs. In this role, you will supervise a team which executes a variety of medium complex activities to maintain capacity utilization and quality standards for reliable operations in the region.Key AccountabilitiesCoordinate the execution of specific equipment strategy for each asset involved with containing, controlling or safeguarding a high hazard process.Implement methodologies to improve operational effectiveness in compliance with regulatory codes and standards.Assist to lead the integration of contractor partners and equipment providing support to the plant force.Partner with regional and global leadership to support area leading practices.Develop the operational related budget to track the area progress against the estimate.You will have some authority for personnel decisions related to hiring, performance, or disciplinary actions, and much of your time is spent completing the same tasks as the subordinate employees.Other duties as assigned#LI-CF1 #fgb #themuseQualificationsMinimum QualificationsBachelor’s degree in a related field or equivalent experienceMinimum one year of directly related work experiencePreferred QualificationsKnowledge of related tools, processes controls and area technology systemsExperience coordinating third party resources to deliver business resultsOne year of supervisory experienceExperience in managing budgetsTraining in structured problem solvingExperience with servant leadership modelPosition InformationThis position is located in White Marsh, MarylandRelocation assistance will be provided for this position.Equal Opportunity Employer, including Disability/Vet.

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America or JPMorgan Chase among other leading organizations in the Baltimore area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Business Operations - Project Management - Banking - Customer Success - IT Support - Data Analytics Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

MAINTENANCE MECH-UNION Baltimore, MD SINAI HOSPITAL MAINTENANCE Full-time - Day shift - 7:00am-3:30pm Support Services/Security/Trade 89116 $17.50-$17.50 Posted:April 25, 2025Apply NowSave JobSaved SummaryJJoin a team that values collaboration, respect and growth. Facilities plays a crucial role in ensuring the safety and efficiency of the hospital, making a difference in patient care every day. Join a system that offers competitive benefits, retirement, recognition program, vacation and holiday pay as well as free parking.JOB SUMMARY:This position is responsible for general facility, building and equipment maintenance and repair, both scheduled and unscheduled tasks, as assigned by the Call Center and/or Facilities and Maintenance management. In general, tasks that will be completed include: Work Order completion, Preventative Maintenance completion, problem identification and resolution, determination of material and supplies required for problem resolution, documentation of activities, utilization of the Computer Maintenance Management System, and communicating with the department’s managementREQUIREMENTS:High School Diploma, GED equivalent or High School certificate preferred.Minimum of one year of maintenance experience required.Preference will be given to candidates with experience in healthcare or commercialsettings.Union rate $17.50 per hourAdditional InformationAs one of the largest health care providers in Maryland, with 13,000 team members, We strive toCARE BRAVELYfor over 1 million patients annually. LifeBridge Healthincludes Sinai Hospital of Baltimore, Northwest Hospital, Carroll Hospital, Levindale Hebrew Geriatric Center and Hospital and Grace Medical Center, as well as our Community Physician Enterprise, Center for Hope, Practice Dynamics, and business partners: LifeBridge Health & Fitness, ExpressCare and HomeCare of Maryland. Share:Apply Now

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Overview: Sheetz Store Support is hiringEquipment Service Techniciansto join our World Class maintenance team. Our technicians maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.