FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

General Summary of PositionJob Summary:Under the general direction of the Clinical Engineering leadership team, the Imaging Specialist II is primarily responsible for tasks associated with the installation, testing, maintenance, calibration and repair of medical equipment and systems. Maintaining clinical equipment and systems considered to be advanced, specialty, highly sophisticated, integrated technology, or requiring manufacturer service training or certification, through the effective use of the medical equipment management plan, while adhering to all medical equipment policies and procedures, and manufacturer or alternative equipment maintenance (AEM) specifications. Primary Duties and ResponsibilitiesResponds to advanced support requests. Diagnoses, resolves and closes issues involving high value, complex medical equipment and systems according to service level guidelines. Services complex, specialty, highly sophisticated diagnostic imaging technology and systems. Takes part in on-call rotation, covering after-hours and weekends.Ensures that preventative maintenance is promptly performed accordingly to the established schedule. Makes daily rounds within the hospital and advanced/specialized modality areas to assure proper operation of medical equipment and systems while correcting any deviations.Orders parts, receives, inventories, assembles, inspects, and tests equipment and documents results. Coordinates efforts with supervisor and/or experienced technicians or specialists as appropriate.Inspects and tests electronic, electromechanical, and mechanical medical and scientific equipment according to specific test procedures. Verifies equipment safety and accuracy for continued use.Documents all work performed in the computerized maintenance management system (CMMS). Ensures documentation is accurate, complete and timely. Provides monthly reports as needed.Provides clear, concise, and timely follow up with colleagues, ensuring they know the status of work being performed on their equipment. Provides technical in-service or instruction to facility staff in proper operation of patient care equipment on an as-needed basis.Provides advanced support of acuity equipment for direct patient care.Reviews department/unit operations manual to ensure compliance with applicable Joint Commission standards, federal and state regulations, accepted Standards of Conduct, and the Corporate Compliance Program. Complies with all MedStar Health Policies and Procedures, Corporate Compliance Program Standards of Conduct, and all applicable statutes, rules, and regulations.Maintains orderliness and cleanliness of work areas. Maintains department facilities, equipment and materials in a condition that promotes efficiency, health, comfort and safety of patients and staff.Anticipates needs of the department, proactively suggests improvement ideas to simplify processes and assists in policy or procedure implementation. Provides information for the development of policies, procedures and records to fulfill or exceed regulatory requirements.Participates in service training of technicians concerning use and operation of equipment.Researches and makes recommendations for new medical equipment and provides support through the installation process. Completes initial inspections and completes required paperwork.Schedules and performs preventive maintenance inspections on medical devices and completes all associated paperwork in a timely and accurate manner. Is knowledgeable of applicable safety and electrical limits for healthcare equipment. May travel between various system sites or provides phone support if required. Reports problems to the Manager at the local sites if needed.May act as a Liaison between Clinical Engineering and other departments related to Medical Equipment, and other multidisciplinary systems.In conjunction with the Director of Clinical Engineering may be responsible for budget preparation and monitoring of operational/capital budget cost. May assist in evaluation, selection and installation of new equipment/systems.May oversee activities of vendors in all phases of installation and implementation of systems. Maintains effective working relationships with other departments and participates in multi-disciplinary operations, quality and service improvement teams. Minimum QualificationsEducationAssociate's degree Biomedical equipment technology, electronics or related field required or related military work/training in mechanical or electrical engineering or academic work or actual work experience aligned with AAMI's Core Competencies for the Biomedical Equipment Technician. required Experience3-4 years Experience in the repair and maintenance of diagnostic imaging technology and systems. required Licenses and CertificationsCBET - Certified Biomedical Equipment Technician Upon Hire required or must be actively pursuing CBET and obtain within 2 years required orCertified Radiology Equipment Specialist (CRES) Upon Hire required or must be actively pursuing CRES and obtain within 2 years required Knowledge, Skills, and AbilitiesAbility to anticipate tasks and prioritize assignments.Ability to input data into computer programs.Ability to travel between sites to maintain diagnostic imaging technology and systems.Ability to work with all levels of internal and external customers.Knowledge of basic electricity/electronics principles. Knowledge of hospital and department procedures and operations.Knowledge of word processing, spreadsheet and database software.Provides hospitable customer service.Skill in the use of basic and specialized hand tools and testing equipment.Well-developed verbal and written communication skills.Knowledge of Joint Commission and other regulatory agency's accreditation requirements. This position has a hiring range of $33.86 - $63.13

Build your best future with the Johnson Controls team!Who We Are:YORK® Chiller Solutions from Johnson Controls, help customers respond to building efficiency needs by providing the widest variety water and air-cooled industrial and commercial chillers on the market. From reducing a facility’s carbon footprint, to delivering a healthier indoor environment and cutting energy costs, we build smaller, more energy efficient chillers tailored to fit almost any comfort or process cooling application – even heating. This role will be based in the Johnson Controls Advanced Development Engineering Center (JADEC) in New Freedom, PA. Candidates must be located within a commutable distance from the facility or be willing to relocate. Get excited!...take a look at where you'll work. Johnson Controls Advanced Development and Engineering Center (JADEC)What We Offer:Competitive salaryHybrid work opportunity (upon the completion of training)Paid vacation/holidays/sick timeComprehensive benefits package including 401K, medical, dental, and vision care– available day one!On the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do:This position is within the water-cooled chiller product engineering team. We are seeking a senior engineer to work on chiller PLC control solutions for both new product and chiller retrofit opportunities. The role would focus on both software and hardware solutions for chiller PLC products. As Senior Engineer within our Chillers product development team, you will be responsible for electrical analysis, detailed design, and control, as well as overall electrical performance of sophisticated water-cooled chillers components and systems, including providing support to manufacturing and applications engineering. In this role you will work on control systems for new industrial chiller applications as well as retrofits, hardware design, design test and sustain control panels and system wiring.How You Will Do It:Develop and maintain electronic hardware and software (temperature sensors, pressure sensors, flow sensors, and A-B software).Design of analog and digital interface circuits, development of power supply circuits and/or selection of power supplies.Perform the worst-case circuit analysis and incorporation of appropriate reliability principles to ensure reliable operation over the environmental specifications.Assist chiller team to develop, test and support chiller system controls (This includes selection of system components and accurate interfacing of them to electronic control panel I/O). Acquire agency approvals such as UL, CE and FCC on Printed Circuit boards and Electronic Panels.Independently conduct and apply costing analysis to feasibility studies on proposed designs or modifications to existing designs.Develop schedules which accurately reflect the project breakthroughs and implement to them.Integrate new and modify existing processes to cover all phases of the electronic development process.Provide mentorship and support to:Drafters and DesignersService and Field TechniciansManufacturing on Commercial Systems products.Provide mentorship to drafters and support Service and Manufacturing on Commercial Systems products.Prepares and participates in design reviews.Learns and applies regulatory codes such as UL, NEC, CSA, and CE codes.Proficient at capturing and analyzing test data to identify electrical performance problems and propose solutions for corrections.What We Look For:RequiredBSEE,BSEET, BSEMET,or related fieldPreferred candidate to have 5 years of valid experience with one or more of the following.PLC programming and troubleshooting.HVAC systems and controls.Automation control systems.Electrical systems, wiring diagrams, and troubleshooting (24VDC, 120VAC, & 240VAC).Ability to work in a fast-paced, schedule driven, team-oriented environment.Ability to program and debug PLC programs.Ability to identify obsolete parts for PLCs, HMIs, Network switches and protocol translators for customer upgrades.Provides secondary level product support to the field after product technical support resources are exhausted for PLC applications.Experience with Allen Bradley PLCs and Rockwell software (rslinx, FactoryTalk, Studio 5000, Activation Manager, etc.).Good verbal and written communication skills are required.Must be willing and able to travel domestically and internationally as required (up to 10% of time).PreferredUnderstands chiller controls.Familiarity with HVAC Systems and motor driven mechanical engineering design and test, alternative experience with gas compression would be advantageous.Chiller PLC experience.#Hybrid#ElectricalEngineer

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONT&S Substation Engineering & Standards is a multi-discipline unit focusing on Civil/Structural and High Voltage (HV) Electrical disciplines. The team supports in-house design, engineering, construction, and commissioning of electric substation projects initiated by growing load demand and replacement of aging infrastructure. Projects supported by the team include transmission substation modifications and expansions, distribution substation construction and expansions, Battery Electric Storage System (BESS) siting and construction, and replacement of aging or failed equipment.The successful candidate develops and/or leads teams in studies and evaluations of new properties, site development plans, design criteria, specifications, calculations, evaluations, cost estimates, and budget development associated with the planning, design, construction, commissioning, operation, and maintenance of Exelon's electric transmission, distribution and telecommunication facilities/systems. Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, properties, equipment, or facilities. Reviews financial data from budget and actual costs of projects. Provides technical expertise to strategic, legislative and operational decisions. Participates in creating, updating, and applying internal/industry standards and technology in a specialized area of expertise. Trains and mentors' others. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESLeads and performs assignments in specialized areas requiring extensive engineering expertise. Requiring maintaining state of the art engineering credential in the specialized technical area. (25%)Leads and performs engineering tasks and projects associated with a critical or analytical engineering project or a small number of complex projects that require specialized knowledge in many areas, may include field testing troubleshooting, and peer review. (30%)Evaluates, develops, implements and leads projects that have significant financial and operational impact, may also develop initial commissioning plans. Plans, writes and performs tasks for documentation deliverables and projects (10%)Participates in department planning, through field/site walkdowns, attend meetings/conference calls, provide budget recommendations and monitor performance for the accomplishment of committed results. (5%)Performs assignments while acting independently, and may lead multi-discipline teams, may include providing direct oversight of contractors. (5%)Serves as an expert in specialized area. (5%)Acts as an expert witness or provide expert opinions as required. (5%)Provides recommendations to management and implements action plans to improve performance and cost effectiveness. (5%)Provides detailed technical training, mentorship, peer review, and/or guidance to others. (5%)Participates in technical and industry societies and committees to enhance knowledge of new technologies or issues in areas of company interest, make recommendations for business decisions regarding strategy for new technologies and/or engineering techniques and tools. (5%) Job Scope: JOB SCOPEInfluences project decisions having a significant impact on the company.Support/Lead employees and or contractors in the execution of plan development used to construct and energize utility or customer equipment/systems.Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction. Minimum Qualifications: MINIMUM QUALIFICATIONSBachelor of Science degree in Engineering or Licensed Professional Engineer (2) (3)Ability to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theoryKnowledge of engineering designs, principles and practices.Knowledge of complex field test equipment.4-7 years of professional engineering experience (1) (3) (See Note).Broad knowledge and experience with regulations, guides, standards, codes methods, practices, and advanced engineering principles necessary to perform very complex or unique assignments for a specificMinimum of two related career experiences (4) (i.e., changes in technical job responsibilities, which may or may not include a change in department) OREngineer in Training OR50% complete (by hours) with advanced technical degree, M.B.A. or Project Management Certification(1) Master's degree in Engineering reduces the OJT experience requirement by 1 year. (2) License must be issued by the state in which you are practicing. (3) PE License reduces the OJT experience requirement by 1 year. (4) Career related experiences is defined as changes in technical job responsibilities and does not have to include a change in department Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one(1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year). Preferred Qualifications: PREFERRED QUALIFICATIONSBachelors degree in Civil Engineering, or a related field, with a focus on site/land development and/or storm water management system designLand development and permitting experience in Maryland’s Baltimore, Harford, Howard, and Anne Arundel Counties and in the City of Baltimore.Experience performing site and zoning analysis for commercial and industrial usesKnowledgeable in roadway design, utility systems, storm water management design, and site grading and balancing.Engineer in Training (EIT) in Maryland (2) (3)Strong teamwork, interpersonal skills and the ability to communicate with all management levels.Strong written and oral communication skills.A working knowledge of analysis software packages such as TR-55, Autodesk Civil 3D, Autodesk Inventor, MATLAB, etc.Ability to analyze industry wide trends and implement enhancements. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $90,400.00/Yr. – $124,300.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONTransmission and Substation Engineering & Standards is a multi-discipline unit focusing on High Voltage (HV) Electrical, System Protection & Control (SPC) and Civil/Structural (CV) disciplines. The team supports internal and external design, engineering, construction, and commissioning of electric substation projects initiated by growing load demand and replacement of aging infrastructure. Projects supported by the team include transmission substation modifications and expansions, distribution substation construction and expansions, and replacement of aging or failed equipment.The Principal Engineer/Subject Matter Expert (SME) possesses specialized knowledge and experience in the design, selection, installation, and maintenance of critical substation equipment, such as, Circuit Breakers, Capacitors, Switchgear, Gas Insulated Switchgear, Battery Energy Storage Systems, STATCOM, etc... The candidate will have experience in the design & execution of complete high voltage transmission and distribution substations, with relevant projects on applications that range from 4kV to 500kV.The successful candidate develops and/or leads teams in studies, plans, design criteria, specifications, calculations, evaluations, cost estimates, budgets, associated with the planning, design, construction, operation, and maintenance of Exelon's electric, transmission, distribution, and telecommunication facilities/systems.Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, properties, equipment, or facilities. Reviews financial data from budget and actual costs of projects. Provides technical expertise to strategic, legislative, and operational decisions. Participates in creating, updating, and applying internal/industry standards and technology in a specialized area of expertise. Trains and mentors’ others. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESLeads and performs assignments in specialized areas requiring extensive engineering expertise. Requiring maintaining state of the art engineering credential in the specialized technical area. (25%)Leads and performs engineering tasks and projects associated with a critical or analytical engineering project or a small number of complex projects that require specialized knowledge in many areas, may include field testing troubleshooting, and peer review. (30%)Evaluates, develops, implements and leads projects that have significant financial and operational impact, may also develop initial commissioning plans. Plans, writes and performs tasks for documentation deliverables and projects (10%)Participates in department planning, through field/site walkdowns, attend meetings/conference calls, provide budget recommendations and monitor performance for the accomplishment of committed results. (5%)Performs assignments while acting independently, and may lead multi-discipline teams, may include providing direct oversight of contractors. (5%)Serves as an expert in specialized area. (5%)Acts as an expert witness or provide expert opinions as required. (5%)Provides recommendations to management and implements action plans to improve performance and cost effectiveness. (5%)Provides detailed technical training, mentorship, peer review, and/or guidance to others. (5%)Participates in technical and industry societies and committees to enhance knowledge of new technologies or issues in areas of company interest, make recommendations for business decisions regarding strategy for new technologies and/or engineering techniques and tools. (5%) Job Scope: JOB SCOPEInfluences project decisions having a significant impact on the company.Support/Lead employees and or contractors in the execution of plan development used to construct and energize utility or customer equipment/systems.Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction. Minimum Qualifications: MINIMUM QUALIFICATIONSMaster of Science degree in Engineering or Licensed Professional Engineer.Ability to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theory.Knowledge of engineering designs, principles and practices. 8+ years of experience in specific areas of engineering and recognized industry expert (Requirement reduced by one year for Licensed Professional Engineer) Advanced knowledge and experience with regulations, guides, standards, codes, methods, practices, and advanced engineering principles. Advanced knowledge of latest technologies necessary to perform a variety of specialized unique or complex assignments for various installation types of services. Industry expert who participates or leads industry committee or working groups or has published technical documents Note: there are a limited number of personnel available in the industry with the required knowledge, ability and experience. License must be issued by the state in which you are practicing Preferred Qualifications: PREFERRED QUALIFICATIONSStrong teamwork, interpersonal skills and the ability to communicate with all management levels.Strong written and oral communication skills.Strong background in Forensic Analysis and ability to conduct investigations, identify patterns, and help derive actionable insights from complex datasets.A working knowledge of analysis software packages such as ASPEN, CDEGS, Autodesk, Autodesk Inventor, MATLAB, etc.Ability to analyze industry wide trends and implement enhancements. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $120,000.00/Yr. – $165,000.00/Yr. Annual Bonus for eligible positions: 20% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

***Consideration given to applicants residing within a commutable distance to New Freedom, PA or willing to relocate***What You Will Do:Our Test Engineer will oversee product testing throughout the test life cycle. This includes designing, planning, execution, and preliminary analysis of results. The Test Engineer must possess and/or have the ability to develop a working knowledge of HVAC/R equipment and its application and has experience with component or system testing, test procedure development, mechanical fluid or airflow system design, troubleshooting, and operation. our Test Engineers are required to execute the testing for individual test subjects in order to successfully and efficiently complete testing for the product area customer. In this role you will conceive, develop, and evaluate plans for solving complex testing challenges. The ideal candidate will have technical aptitude in HVAC. This position is not eligible for Visa sponsorship.How You Will Do It:Provide technical communications for Test Engineering to product customer(s).Plan and execute tests of chillers and components. This may include:Participate in the development of and/or receive and review test specifications from customer group; seek out and acquire needs from other areas/disciplines who may wish to benefit from testing a particular subject.Use input from the customer group(s) to facilitate test plans and identify resource (human, physical) requirements.Meet with product engineering, product management, product technical support, or equivalent groups to agree upon and issue test plans.Work within the Test Engineering team to schedule tests and required resources with regards to capacity limitation.Provide oversight and input to Test Technicians for set up of data acquisition software configurations.Work with labor, test support, and engineering resources to actively manage the test from set up to completion. This includes daily monitoring and planning, communication, direct data acquisition, review of data acquired, provide engineering analysis of data acquired, problem resolution, and other activities necessary in order to efficiently perform and complete testing in a timely fashion.Maintain a proficiency in understanding chiller test data to guide the customer engineering teams as necessary to acceptance or assist in explanation of data results.Drive the evaluation and creation of standard procedures, test standards, and processes using applicable engineering tools. This includes, but is not limited to LEAN, 6-Sigma, Value Stream Mapping, Design of Experiments (DOE), 5S, Gemba, Kaizen (continuous improvement), KPI analysis and development, PDCA (Plan, Do, Check, Act), and Root Cause Analysis.Use experience to develop new procedures, processes, and resources as necessary to provide more efficient, accurate, and advanced testing services for product customers.What We Look For:BS required in an engineering or engineering adjacent discipline.Preferred combination education and experience, three (3) years direct work experience in the following: HVAC/R equipment development, servicing or testing, good understanding of HVAC/R systems, concepts, and diagnostics.Ability to perform test data acquisition and data analysis, test troubleshooting and diagnostics, technical reporting, and related communication at various levels is required.Experienced in environments ranging from laboratory, manufacturing/testing facilities, and field sites.Able to work in fast-paced, schedule driven work environment and possess the agility/adaptability to quickly move from one task to another when required. Must be self-motivated.Strong communication skills; willing to confront issues in an open, efficient, and tactful manner.Strong group communication and presentation skills.Demonstrated use of engineering tools and concepts within a manufacturing or testing facility.Good computer and data analysis/management skills with proficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint) as well as internet software and e-mail.Preferred:Familiarity in one or more technical and operational disciplines within HVAC platform development.Background in engineering or development testing.#TestEngineer#Hiring

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONDevelops studies, plans, criteria, specifications, calculations, evaluations, design documents, performance assessments, integrated systems analysis, cost estimates, budgets, associated with the planning, design, licensing, construction, commissioning, operation, and maintenance of Exelon's electric generation, transmission, distribution, gas and telecommunication facilities/systems. Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, processes, equipment, vehicles or facilities. Reviews financial data from budget and actual costs of projects. Operates independently and seeks guidance when appropriate. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies.**Posting Notes** This position is in the BSC Transmission Operations Support - Compliance & Procedures group. The team supports the Exelon TSO Control Rooms with reviewing, updating, and creating Procedures and Job Aids as well as ensuring compliance to all applicable NERC Standards. Support includes documenting and tracking evidence of Compliance and participating in Compliance Audits by PJM as well as Reliability First. May be required to assist with training on procedures at times. A compliance background and or experience in any Transmission & Substation Organizations, Operations, or Control Room environment is desirable. There is opportunity to utilize automation tools and innovation for efficiency. The position is based out of our Exelon facility in Woodlawn, MD and some travel is required.Note: This is a hybrid position (in-office with remote flexibility). Employees are required to be in office at least three days per week (Tuesday, Wednesday, and Thursday). This position must sit out of our Woodlawn, MD office. This position is not eligible for relocation assistance. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESPerforms engineering tasks associated with critical engineering projects or a number of small projects with many complex features.Performs assignments in areas where engineering precedents are incomplete, lacking or require broad experience.Evaluates, develops and implements projects that have moderate financial and operational impact.May serve as an expert for organization in a specific area or responsibility that may include the delivery of classroom training and/or OJT/OJE. Job Scope: JOB SCOPEInfluences project decisions having a moderate impact on the company that may include leading employees or contractors in the commissioning of electrical systems and equipment to be placed On System. Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction. Minimum Qualifications: MINIMUM QUALIFICATIONS Bachelor of Science degree in Engineering or Licensed Professional Engineer (2) (3) Ability to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theoryKnowledge of engineering designs, principles and practices.Knowledge of complex field test equipment. 4-7 years of professional engineering experience (1) (3) (See Note).Broad knowledge and experience with regulations, guides, standards, codes methods, practices, and advanced engineering principles necessary to perform very complex or unique assignments for a specificMinimum of two related career experiences (4) (i.e., changes in technical job responsibilities, which may or may not include a change in department) OREngineer in Training OR50% complete (by hours) with advanced technical degree, M.B.A. or Project Management Certification(1) Master's degree in Engineering reduces the OJT experience requirement by 1 year. (2) License must be issued by the state in which you are practicing. (3) PE License reduces the OJT experience requirement by 1 year. (4) Career related experiences is defined as changes in technical job responsibilities and does not have to include a change in department Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one(1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year). Preferred Qualifications: PREFERRED QUALIFICATIONSGraduate degree (1) or Graduate level work in Engineering, Business Administration or Project Management CertificationLicensed Professional Engineer (2) (3)Strong teamwork, interpersonal skills and the ability to communicate with all management levels.Strong written and oral communication skills. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $90,400.00/Yr. – $124,300.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

What you will doThe Sr. Product Engineer is responsible to contribute to the product team through product design, testing, data analysis, and project management. This role will focus the interface between mechanical systems and how they are controlled. This will involve development of new concepts as well as troubleshooting issues that arise during lab testing. The Sr. Product Engineer will also support the manufacturing and sustaining of existing products and applying lessons learned to new developments. All these tasks also require strong communication skills and the ability to clearly present information to global engineering teammates, engineering managers, and product management.*This position will be onsite in New Freedom, PA*Look where you will work! - https://youtu.be/mfkKB_lRZgA si=_V1uR7ycOQoqirwsHow you will do itContributes to the on-time completion of programs and regularly reports on the status of projects.Coordinate and help execute test programs to validate performance and reliability of controls systems and related electro/mechanical components.Proficient in system control designs for mechanical devices such as motors, valves, and actuators.Willing to learn theories, concepts, technical principles and processes related to fluid, thermal, and other mechanical aspects of commercial or industrial HVAC equipment.Has proficiency in mechanical design and be able to conceptualize and implement design ideas into CAD models and physical prototypes.Application of regulatory codes such as UL and CE as well as ability to learn specific regional requirements needed for global markets.Work closely with the design and manufacturing teams in generating system controls and end of line validation for the best balance of cost, performance, and reliability.Analyzes, designs, modifies and/or troubleshoots mechanical sub-components and electrical sub-systems based on test data, simulation, and modeling results.Generate and review technical documentation for use within the product team and for distribution to external customers.Occasional domestic and international travel (less than 10%).Teamwork and the ability to work with many teams is critical in our global product development environment.What we look forBS in Engineering or related science (controls engineering, mechanical engineering, mechatronics engineering)Minimum 4 years of experience in a related fieldExperience with Chillers and Heat PumpsPreferred experience with communication protocols such as ModBus and CANBusPreferred familiarity with MATLAB Simulink or similar modeling and simulation platformProficient with organizing and processing large amounts of dataExperience with product development and sustaining of controls systems

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONDevelops and/or leads teams in studies, plans, criteria, specifications, calculations, evaluations, design documents, performance assessments, integrated systems analysis, cost estimates, budgets, associated with the planning, design, licensing, construction, commissioning, operation, and maintenance of Exelon's electric generation, transmission, distribution, gas and telecommunication facilities/systems. Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, processes, equipment, vehicles or facilities. Reviews financial data from budget and actual costs of projects. Provides technical expertise to strategic, legislative and operational decisions. Participates in creating, updating, and applying internal/industry standards and technology in a specialized area of expertise. Trains and mentors others. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies.**Posting Notes**This position is in the BSC Transmission Operations Support - Compliance & Procedures group. The team supports the Exelon TSO Control Rooms with reviewing, updating, and creating Procedures and Job Aids as well as ensuring compliance to all applicable NERC Standards. Support includes documenting and tracking evidence of Compliance and participating in Compliance Audits by PJM as well as Reliability First. May be required to assist with training on procedures at times. A compliance background and or experience in any Transmission & Substation Organizations, Operations, or Control Room environment is desirable. There is opportunity to utilize automation tools and innovation for efficiency. The position is based out of our Exelon facility in Woodlawn, MD and some travel is required.Note: This is a hybrid position (in-office with remote flexibility). Employees are required to be in office at least three days per week (Tuesday, Wednesday, and Thursday). This position must sit out of our Woodlawn, MD office. This position is not eligible for relocation assistance. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESLeads and performs assignments in specialized areas requiring extensive engineering expertise. Requiring maintaining state of the art engineering credential in the specialized technical area.Leads and performs engineering tasks and projects associated with a critical or analytical engineering project or a small number of complex projects that require specialized knowledge in many areas, may include field testing troubleshooting, and peer review.Evaluates, develops, implements and leads projects that have significant financial and operational impact, may also develop initial commissioning plans. Plans, writes and performs tasks for documentation deliverables and projectsParticipates in department planning, through field/site walkdowns, attend meetings/conference calls, provide budget recommendations and monitor performance for the accomplishment of committed results.Performs assignments while acting independently, and may lead multi-discipline teams, may include providing direct oversight of contractors.Serves as an expert in specialized area.Acts as an expert witness or provide expert opinions as required.Provides recommendations to management and implements action plans to improve performance and cost effectiveness.Provides detailed technical training, mentorship, peer review, and/or guidance to others.Participates in technical and industry societies and committees to enhance knowledge of new technologies or issues in areas of company interest, make recommendations for business decisions regarding strategy for new technologies and/or engineering techniques and tools. Job Scope: JOB SCOPEInfluences project decisions having a significant impact on the company.Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction Minimum Qualifications: MINIMUM QUALIFICATIONSBachelor of Science degree in Engineering or Licensed Professional Engineer (2) (3) Knowledge of engineering designs, principles and practicesAbility to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theory.Detailed knowledge of applicable standards, codes methods, and practices unique to areas of expertise. 7+ years of professional engineering experience (1) (3) (See Note 3. Thorough knowledge and experience in unique areas of engineering expertise. Ability to apply advanced engineering principles to identify and resolve complex issues. Minimum of three related career experiences (4) (i.e., changes in technical job responsibilities, which may or may not include a change in department) OR Lead Member of a recognized industry committee OR Professional Engineer's License (2), advanced technical degree, MBA or Project Management Certification (1) Master's degree in Engineering reduces the OJT experience requirement by 1 year. (2) License must be issued by the state in which you are practicing. (3) PE License reduces the OJT experience requirement by 1 year. (4) Career related experiences is defined as changes in technical job responsibilities and does not have to include a change in department.Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one (1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year). Preferred Qualifications: PREFERRED QUALIFICATIONS Graduate degree (1) or Graduate level work in Engineering, Business Administration or Project Management Certification Licensed Professional Engineer (2) (3) Strong teamwork, interpersonal skills and the ability to communicate with all management levels. Strong written and oral communication skills. A working knowledge of analysis software packages such as CYMDIST, PSS\E, Python, PSCAD, MATLAB, etc. Ability to analyze industry wide trends and implement enhancements. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $100,800.00/Yr. – $138,600.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

***Consideration given to applicants residing within a commutable distance from New Freedom, PA or willing to relocate***Build your best future with the Johnson Controls team!Who We Are:Johnson Controls is powered by your talent. We are the power behind the customer mission. Together we are building a world that’s safe, comfortable and sustainable. Our diverse global team of 100,000 experts in more than 150 countries creates innovative, integrated solutions to make cities more connected, buildings more intelligent and environments more comfortable and secure.What We Offer:Competitive salary Paid vacation/holidays/sick time - 15 days of vacation first year!Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one!Extensive product and on the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do: Johnson Controls has a great opportunity for a Senior Electrical Test Engineer to join our dynamic team in New Freedom, PA, where you will conduct design, simulation, prototype testing, reliability testing to confirm the product operates as expected with reference to specific documented hardware requirements.Johnson Controls Advanced Development and Engineering Center (JADEC)How You Will Do It:Maintain and test printed circuit boards, which contains MCU, FPGA and other circuits, for chiller application.Conduct prototype testing on hardware-in-loop system, variable speed drives and chiller to verify control performance.Conduct Variable Speed Drive (>250KW) testing at Dyno or on chiller.Collect waveforms using oscilloscope or/and data using power analyzer.Data analysis using MATLAB script and understand FFT results.Analyze VSD performances using testing results.Provide guidance/support to product technical support team and PCBA manufacturing factories as needed to maintain existing and/or NPI products.Understanding and complying with quality policy, procedures and instructions to ensure product quality and customer satisfaction.What You Will Need:RequiredBSEE or BSCE, or related field.Minimum of 3 years of experience.Familiarity with the usage of oscilloscope, power analyzer, differential probe and Rogowski coil.Experience with data collection using scope and power analyzer.Familiarity with the concept of Fourier Transform Analysis and use it on test data analysis.Ability to work in a fast-paced, schedule driven, team-oriented environment.Positive team player, strong verbal and written communication.Preferred:Familiarity with Variable Speed Drive (VSD) testing at dynamometer. Capable of working with VSD having three phase 460VAC inputs.Good understanding of power electronics and motor control. Experience with motor control.#Electricalengineer#TestEgineer

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITION Develops and/or leads teams of employees or contractors in studies, plans, criteria, specifications, calculations, evaluations, design documents, integrated systems analysis, associated with the testing, commissioning, planning, design, licensing, construction, operation, and maintenance of Exelon's electric generation, transmission, distribution, gas, telecommunication, P&C communication, facilities/systems. Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, processes, equipment, or facilities. Acts as recognized technical authority in a specialized engineering area which may involve witnessing of Factory Acceptance Tests. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESLeads highly technical consultation and training through OJT/OJE (may include some class room instruction as well) on highly complex and unique technical areas requiring the application of advanced engineering principles and may require advanced knowledge of complex analog and digital field test equipment. (25%)Evaluates complex technical issues that require highly specialized knowledge in very specific areas and recommends actions or programs for their resolution which may necessitate the review/evaluation of engineering design documents. (25%)Leads the work activities of project teams and others on the implementation of large specialized technical projects and/or programs in order to develop studies, proposals, commissioning plans to support safely energizing and placing major utility and customer systems and equipment On System. (25%)Participates in technical and industry societies and committees to enhance knowledge of new technologies or issues in area of company interest. (10%)Participates in department/project management planning, and monitor performance for the accomplishment of committed results. (10%)Acts as an expert witness and provide expert opinions for internal committees. (5%) Job Scope: JOB SCOPEHighly influential on strategic management decisions that can have a major impact on the company. Support/Lead employees and or contractors in the execution of plans developed to initially energize utility or customer equipment/systems and placed On System.Set direction for the organization in regards to technical issues.Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction Minimum Qualifications: MINIMUM QUALIFICATIONSBachelor's degree in Engineering discipline with at least 7 years of professional engineering experience. (1) (3) (See Note)Completed Assignments and Projects showing evidence of:Ability to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theory.Knowledge of engineering designs, principles and practices.Advanced knowledge and experience with regulations, guides, standards, codes, methods, practices, and advanced engineering principles (2).Advanced knowledge of latest technologies necessary to perform a variety of specialized unique or complex assignments for various installation types of services. *Note: there are a limited number of personnel available in the industry with the required knowledge, ability and experience. (1) Master's degree in Engineering reduces the OJT experience requirement by 1 year. (2) License must be issued by the state in which you are practicing. (3) PE License reduces the OJT experience requirement by 1 year. Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one (1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year. Preferred Qualifications: PREFERRED QUALIFICATIONSStrong teamwork, interpersonal skills and the ability to communicate with all management levels. Strong written and oral communication skills. Demonstrated ability to lead the work activity of others. Master of Science degree in Engineering (1) or Licensed Professional Engineer (2) (3) Industry expert who participtes or leads industry committee or working groups or has published technical documents. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $109,600.00/Yr. – $150,700.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

What you will do Johnson Controls has a phenomenal opportunity for a Senior Controls Engineer to join our dynamic team in New Freedom, PA, to help ensure the reliability and performance of our cutting-edge Chiller products. Preference given to candidates residing within a commutable distance to New Freedom, PA, or willing to relocate.Johnson Controls Advanced Development and Engineering Center (JADEC)As part of the Johnson Controls Building Efficiency business, the Controls & Systems Engineering team applies this mission to buildings, providing solutions for a more comfortable, safe, and sustainable building environment for owners and occupants. The Senior Controls Engineer will join the team that develops advanced controls for Chillers and Smart Building products used by our customers to run their buildings and manage their energy costs. Get ready to work as part of a close-knit team of experienced engineers and apply and enhance your engineering development skills to develop applications, products, and tools! Interesting right Keep reading!How you will do itThe candidate will perform duties as a Data Center Controls engineer.As a member of the Controls & Systems Engineering team, the candidate will work with other engineers in developing, testing, and supporting controls for Chiller Solutions’ products.This individual must be an analytical thinker and be disciplined in applying robust design methodologies and engineering principles (modeling, simulation, statistics, data acquisition, etc.) to develop and realize equipment control solutions.This individual must be self-motivated and able to work independently but must also be able to interface directly with electronics engineers, mechanical engineers, software developers, systems engineers, and research engineers to develop system-wide solutions.This role will work with peers and specialists across disciplines to meet shared product milestones. In addition, the position will be responsible as lead for complex projects, which will involve implementation, reviewing work products, and mentoring junior engineers and interns.What you will needRequiredA qualified individual shall have a minimum of aBSin Controls Engineering, Electrical Engineering, or related field.Model Based Design with Code Generation 5+ years.Model Based Design Automated Test 5+ years.MATLAB/Simulink 5+ years of work experience. Experience working with and producing control and system requirementsspecifications and documentation.Industry experience outside of Chiller HVAC is acceptable, including equipment or machine manufacturing. Strong team-building skills to support fast-paced product delivery methodologies.#Controlsengineer#Systemsengineer

***Consideration given to applicants residing within a commutable distance from New Freedom, PA or willing to relocate***Build your best future with the Johnson Controls team!What We Offer:Competitive salaryPaid vacation/holidays/sick time -15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care -Available day oneExtensive product and on the job/cross training opportunitiesWith outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do:The Sr Engineer is responsible to contribute to the product team through product design, testing, data analysis, and project management. The Sr Engineer will also support the manufacturing and sustaining of the product including initiating and executing design changes. All these tasks also require strong communication skills and the ability to clearly present information to engineering teammates, engineering managers, and product management. This role will be based in the Johnson Controls Advanced Development Engineering Center (JADEC), take a lookJohnson Controls Advanced Development and Engineering Center (JADEC)How You Will Do It:Maintains understanding of theories, concepts, technical principles and processes related to fluid, thermal, and other mechanical aspects of water-cooled chillersContributes to the on-time completion of programs and regularly reports on the status of projectsHas proficiency in mechanical design and be able to conceptualize and implement design ideas into the productApplies mechanical codes such as UL, CE, PED and ASMEWork closely with the design and manufacturing teams in generating layout concepts and system configurations that consider the best balance of cost, performance, and reliability.Coordinate and help execute test programs to validate performance and reliability of mechanical systems and componentsAnalyzes, designs, modifies and/or troubleshoots mechanical sub-components and sub-systems based on test dataGenerate and review technical documentation for use within the product teamOccasional domestic and international travel (less than 10%)Teamwork and the ability to work with many teams is critical in our global product development environment. Each of these virtues must be consistently displayed with a focus on continual improvement of our team cultureWhat We Look For:RequiredBS in Engineering or related scienceMinimum 4 years of experience in HVACR or related fieldProficient with organizing and processing large amounts of dataExperience with product development and sustaining of configurable systemsPreferredStrong understanding of fluid and thermal principlesExperience with fluid dynamics and heat transferPackaged systems#ProductEngineer#Hiring

***Consideration given to applicants residing within a commutable distance from New Freedom, PA ***Build your best future with the Johnson Controls team!Who We Are:Johnson Controls is powered by your talent. We are the power behind the customer mission. Together we are building a world that’s safe, comfortable and sustainable. Our diverse global team of 100,000 experts in more than 150 countries creates innovative, integrated solutions to make cities more connected, buildings more intelligent and environments more comfortable and secure. This position is not eligible for Visa sponsorship.What We Offer:Competitive salary Paid vacation/holidays/sick time - 15 days of vacation first year!Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one!Extensive product and on the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do: Hardware design engineers design, test and sustain electronic Printed Circuit Board (PCBs) assemblies and components. They conduct schematic design and layout using CAD software to meet specific documented hardware requirements. Get excited! Take a look at where you will work...Johnson Controls Advanced Development and Engineering Center (JADEC)How You Will Do It:Develop and maintain PCBA for chiller applications including Variable Speed Drive (VSD) boards and chiller control boards.Design of analog & digital interface circuits, power supply circuits with MCU & FPGA onboard.Participate circuit analysis and incorporate appropriate reliability principles into PCBA design.Design and maintain PCBAs including both schematic and layout using design tools such as Altium.What You Will Need:RequiredBSEE or BSCE, or related field; and 2 years of experience.Ability to work in a fast-paced, schedule driven, team-oriented environment.Good team player, strong verbal and written communication skills.PreferredFamiliarity with LabView software.Familiarity with test fixture design is desired.Familiarity with PCBA circuit design.#EarlyCareers#ElectricalEngineer

Build your best future with the Johnson Controls team!Who We Are:YORK® Chiller Solutions from Johnson Controls, help customers respond to building efficiency needs by providing the widest variety water and air-cooled industrial and commercial chillers on the market. From reducing a facility’s carbon footprint, to delivering a healthier indoor environment and cutting energy costs, we build smaller, more energy efficient chillers tailored to fit almost any comfort or process cooling application – even heating. Candidates must be commuting distance to New Freedom, PA, or willing to relocate.Take a look at where you'll work! Johnson Controls Advanced Development and Engineering Center (JADEC)What You Will Do:This position is within the water-cooled chiller contract engineering team. We are seeking a hands-on engineer to work on contract chiller sales orders, and interface with our design team as needed. This role will focus on providing wiring diagrams, panel diagrams, instrumentation, and possibly system wiring components.How You Will Do It:As Electrical Engineer within our Chillers product development team, you will be responsible for electrical analysis, detailed design, and control, as well as overall electrical performance of sophisticated water-cooled chillers components and systems, including providing support to manufacturing and design and drafters. In this role you will work on providing wiring diagrams, panel diagrams, instrumentation (BOMs), ECNs, and possibly system wirings in time. This position is not eligible for Visa sponsorship.What We Look For:RequiredBS in Electrical Engineering, or EMET and or related science.Minimum 3 years’ experience (BS degree) in a related field and directly handling Hazardous Environments jobs.Ability to read, understand, and create electrical and control schematicsAbility to troubleshoot and debug electrical and control circuitsUnderstanding of process and machine control fundamentalsAbility to manage details of technical requirements including task assignments, tracking and communicationsAbility to create electrical schematics and panel design layoutsAbility to manage workload effectively (planning, organization, communication of tasks)Strong teamwork skills (will be part of multidisciplinary teams working major developments)Knowledgeable around different Comms Protocols (RS485, RS232, Ethernet)Experience with CAD tools and 3D modeling (AutoCAD and CERO or SolidWorks)Experience creating Harness & Power Distribution DrawingsExperience with Hazardous Environments and the requirements needed for Electrical designs and safety requirements. (Class 1, DIV 1; and Class 1, DIV 2)Preferred:Refrigeration system knowledge (chillers, heat pumps, etc.)Mechanical aptitude (connection to the "system" they're controlling)Experience with creating BOMsGood trainer in CAD tools (inexperienced employee(s) could benefit from partnering with this candidate)ERP Experience (SAP preferred)P&ID ExperienceCreo Cabling Experience#ElectricalEngineer#LI#Hiring