We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

We help YOU make it!$5,000 Retention Bonus! Diesel Technicians starting at $31 per hour Annual Tool Allowance!Benefits available on Day! Medical, dental, vision. We offer a 401K, employee stock purchase plan and a store culture of safety! 2% automatic company contribution to 401(k) with company match up to additional 6%!Schedule:Tuesday – Saturday 9am weekdays 7am Saturday OT after 40 hoursUS Foodsis one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. Main Ingredients of the JobTroubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.What you Bring to the TableMust have 2-3 years of commercial Diesel mechanic or 1-2 years of Diesel Mechanic exp with TK or Refrigeration certification Diagnostic and Troubleshooting Competency Relating to Equipment RepairsSuccessfully Demonstrated Independent Analytical and Problem-Solving SkillsPrior Experience in Administering Appropriate PM ProgramMust Furnish Own Personal Hand ToolsKnowledge/Skills/Abilities:Ability to Comply with EPA And Osha Regulations as Pertaining to The Shop and FleetAbility to Read and Understand Technical and Service ManualsExcellent Communication Skills: Able to Communicate with Co-Workers and Drivers with Demonstrated Teamwork SkillsAbility to Manage Multiple Functions Simultaneously in A Fast-Paced Environment with Minimal SupervisionAbility to Adapt to Changing Organizational and Operational NeedsComputer and Software ExperienceAbility to Work A Flexible Schedule Including Nights and WeekendsMust Be Able to Work Overtime When NeededAt Us Foods® We Help Our Customers Make It with Products and Services That Shape the Communities Where We Live and Work. We Are Passionate About Demonstrating the Same Commitment to Helping Our Employees Make It Through Continued Professional Growth Opportunities and Broad Career Path Potential.Physical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyWhy Us Foods Our Customers' Success Goes Far Beyond Great Food. At Us Foods, We Work to Exceed Expectations and Give Our Customers the Competitive Edge They Need. At the Foundation of Those Efforts Are Our Cultural Beliefs, The Pillars That Define Our Work Ethic, Collaborative Spirit and Commitment to Service.At Us Foods®, We Are Committed to Compensation and Benefits That Respect and Reward Our Employees for Their Dedication and Hard Work. If You Join Our Team, We Provide Flexibility and Options to Fit Every Stage of Your Career.***EOE Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Protected Veteran/Disability Status***Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $30.23 - $33.00 As applicable, this role will also receive overtime compensation, incentive compensation based on productivity and quality, shift differential. Benefits for this role may include health insurance, retirement benefits, paid time off, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

If you're looking for the benefits of joining an industry leader, with a high-charged, energy-filled environment, then you can stop looking, because you have found what you're looking for in the Automotive Technician position at our Hertz Rent-A-Car location. Bring your energy, drive, and motivation to Hertz, and set your goals on cruise control! The Hertz Corporation, a world leader in the car rental industry, currently seeks energetic team players to join our team. The 'Automotive Technician is the second level within the Hertz Corporation for our maintenance team. In this role you will be performing preventative maintenance, minor repairs, and inspection. Wages: $20.25 per hour Educational Background: High School Diploma or equivalent preferred Professional Experience: At minimum one (1) years of vehicle maintenance experiencePreferred prior experience with automotive repair (personal or professional) Knowledge: Must be able to perform vehicle repairs with oversightAbility to use shop equipment such as lifts, tire changing equipment, alignment machines, and scan tools Additional Notes: Must have tools to perform necessary repairsMust have a Valid Driver’s LicenseThe Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The Hertz Corporation is one of the largest worldwide airport general use vehicle rental companies, and the Hertz brand is one of the most recognized in the world. US EEO STATEMENT At Hertz, we champion and celebrate a culture of diversity and inclusion. We take affirmative steps to promote employment and advancement opportunities. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company. Individuals are encouraged to apply for positions because of the characteristics that make them unique. EOE, including disability/veteran

Req ID:461496Address: 440 W. 3rd Mifflinville, PA, 18631Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.*****************This Engineering role can be filled at Entry-level, Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***********************************Entry Level - $85,000Mid Level - $88,200 - $108,000Sr Level - $115,200- $141,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K PRIMARY PURPOSE OF POSITIONResponsible for performing engineering and technical tasks, under general supervision, in support of nuclear plant operations.PRIMARY DUTIES AND ACCOUNTABILITIESPerform engineering and technical tasks as assigned by supervision applying general engineering principles.Assure all engineering products prepared are in accordance with applicable safety analyses, industry codes, engineering specifications and all regulatory requirements.Participate in the development and implementation of effective processes and techniques at appropriate levels of detail and in compliance with established policies and procedures.Recommend format and methodology improvements to standard processes and procedures.Project areas in scope:Inservice InspectionInservice TestingValue ProgramsFire Protection and FLEX ProgramsMINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Entry Level E01 Engineer &ndash New GraduateE1- B.S in EngineeringMINIMUM QUALIFICATIONS for Mid-level E02 Engineer B.S. in Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Engineering or Licensed Professional Engineer and 5+ years engineering experience PREFERRED QUALIFICATIONSEngineer in training certificationGood grasp of techniques and a good understanding of the fundamental functions performed by the group. As responsibility increases within the organization

Compensation Details:$15.40- $19.20 - $23.00Why should you join our team We live our values - W.E.L.I.G.H.T (Winning, Excellence, Love, Integrity, Gratitude, Humility, and Teamwork). Gratitude. Humility. Love. You don’t often see values like these in most corporate statements, but Ace is different. These things are important to us. They represent our commitment to the company, our employees, to Ace retailers and to the Ace brand.In addition to providing our employees a great culture, Ace also offers competitive benefits* that address life’s necessities and perks, many of which expand and improve year after year, including:Weekly PayPaid Time Off Programs (incl. vacation, paid sick time, holiday pay). Newly hired full-time employees will receive a one-time pro-rated allocation of up to 24 hours of vacation in their first calendar year depending on the month of hire. Paid sick time in accordance with applicable state law. You will receive up to 9 holidays per year, depending on the month of hire.Comprehensive health coverage (medical, dental, vision and disability – up to 26 weeks short-term disability and long-term disability) & life insurance benefits for you and your dependents.Generous 401(k) retirement savings plan with a fully vested matching contribution the first year in addition to quarterly contributions and annual discretionary contribution (once eligibility requirements have been met). Over the past 5 years, company contributions (matching, quarterly & discretionary) for fully eligible employees have averaged 9.6% of total eligible compensationDock to Driver Program: Ace will pay for your CDL License and Training to provide a career path transition to a Driver positionLong-term Career Opportunities:Many of our leaders started with Ace looking for a job, just like you, but found long-term career opportunities at our 15 Distribution Centers across the country and our Corporate Headquarters.Our company is growing, and we would love to have you grow with us!Tuition Reimbursement ProgramEmployee Recognition ProgramMerchandise Discounts on Top Brands like Weber, Traeger, Yeti, Craftsman, DeWalt and thousands more!Employee Assistance Program (EAP) – access to free visits to therapists and lawyers, guidance on financial matters, elder and childcare, and assistance with tickets to entertainment events.Adoption cost reimbursementIdentity theft protection* Benefits are provided in compliance with applicable plans and policies.Job Description:Schedule:Sunday through Thursday 6:00am to 2:30pmWhat You’ll DoKnowledge of machines and tools, including their designs, uses, repair, and maintenance.Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices.Perform routine preventive maintenance or repair to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.Inspect, operate, or test machinery, equipment, or systems to diagnose machine malfunctions.Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary.Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment.Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists.Record type and cost of maintenance or repair work.Ace Hardware is committed to promoting and maintaining a safe, healthy and injury-free environment for all team members. This is our number one priority, and we will support programs and initiatives that focus on this commitment. It is critical that all team members take responsibility for their safety as well as the safety of others to ensure that Ace Hardware is a world class safety organization.What you need to succeed:Be a safety champion by promoting a safe and productive workplace through your own actions, including the proper use of PPE, safe operation of powered equipment and safe lifting techniques as determined by the role.Be an active participant in contributing to a successful safety culture in the facility.High school diploma or GED equivalent preferred.Must be at least 18 years of age.Ability and willingness to work non-traditional shifts and hours.Experience with general maintenance/ electrical duties preferred.Have general knowledge of conveyors systems, and ability to trouble shoot.Ability to CMMS and good computer skills for utilizing PM Software system.Maintenance experience within a manufacturing/ distribution environment.Want to be notified when new jobs are posted Follow the link below to create an account and set up custom job alerts:Create Job AlertWe want to hear from you!When most people think of career opportunities with Ace Hardware, they often think of the helpful cashiers and sales associates at their local store. However, have you also considered the people behind the scenes who select, promote, ship and process the invoices for more than 75,000 products Maybe you haven't, but we'd like you to. Because together we help our customers take care of their homes. Come find out why a career with the Ace Hardware Corporation is one of America's best kept secrets.Equal Opportunity EmployerAce Hardware Corporation is committed to a policy of promoting equal employment opportunities. The company recognizes the importance of diversity and leveraging the skills and talents of all people to the mutual advantage of each individual and the organization. The company is committed to the prevention of employment discrimination related to race, religion, color, sex (including sexual harassment), gender identity, national origin, age, marital status, disability and military or veteran status, sexual orientation or any other action covered by federal or applicable state/local laws.DisclaimerThe pay range for this position starts as listed in the job posting, but could be higher based on education and experience. Please note, compensation decisions are dependent on the facts and circumstances of each opening. We take into consideration the minimum requirements outlined in the job description, such as an individual’s education, training and experience, the position’s work location, required travel (if any), and external market conditions when determining the final salary for potential new hires. Be aware that salary estimates published via alternate online job boards may not be a true representation of the actual pay range offered for this position. Please refer to the Ace position description for the accurate starting pay range information and feel free to discuss this with a Talent Acquisition professional if you are chosen to move forward with an interview. This written “Position Description” is not intended to cover all aspects of the position listed. It is meant to cover the basic/general essential job functions of a particular position. Ace Hardware Corporation reserves the right to change job duties, including essential job functions, according to business necessity.It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or .Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters.Job Location: Camp Hill, PA Job Type: Full TimeShift(s) Available: 1st & 2ndCompensation: $21.75/hrBenefits InformationMedical, Dental, Vision, and Prescription Drug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Principal AccountabilitiesWorking in a wet or humid environment in cold temperatures and around heavy machineryLifting, stretching, standing or sitting for long periods of timeSafely operate a forklift and/or pallet jack to stage finished goods in proper floor locations toawait shippingLoading wrapped pallets into designated truckUnloading totes/pallets as needed for productionScanning all totes/boxes to be shipped, recording physical counts and wrapping pallets to beshippedInspect pallet jack/High-Reach to ensure is in good working conditionsEnsure that all food safety procedures and practices are being followedEnsure that all safety procedures and practices are being followedEnsure you are wearing proper personal protective equipmentRequired QualificationsMust be eligible to work in the United States without Visa sponsorshipMust be 18 years or olderMust be able to operate a high reach truck/stand up forkliftMust be able to operate an electric pallet jackAbility to read, write, and speak EnglishBe sure you are following proper lifting proceduresAbility to lift, stretch, stand and sit for long periods of timePreferred QualificationsPrevious experience on a high reach truckPrior work history in a fast-paced production environmentPlease note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/VetTo apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:JOB DESCRIPTION- Trailer Technician Candidate will possess personal knowledge and skills to perform preventative maintenance on UPS Transportation Trailers and Converter Dollies.? Will properly diagnose and perform necessary repairs to non-power equipment, including air brake systems and electrical systems.? Candidate must be willing to work 2nd or 3rd shift.? Schedules include Monday through Friday and Sunday through Thursday and Tuesday through Saturday. An attractive pay and benefits package is offered. Uniforms are provided. Candidate must possess all personal tools required to perform the job and will be required to appropriate necessary hand tools as required by job assignment. Ideal candidate will possess the following:Current documented trailer mechanic experience Experience using diagnostic equipment, scan tools and personal computer Possess a full complement of personal hand tools Job ResponsibilitiesMeet D.O.T requirements Bend, stoop, squat, kneel, crouch, crawl, climb ladders and stairs, stand, walk, and turn/pivot frequently throughout the duration of the workday Full time: 8-10 hours per day, 4-5 days per 7-day week Report to work on a regular and timely basis and complete the scheduled workday on a consistent basis Ability to work varying shifts, additional hours and/or overtime depending on service needs Sitting required infrequently throughout the duration of the workday Lift, lower, push, pull, leverage and manipulate equipment and/or packages weighing up to 70 pounds Assist in moving packages or equipment up to 150 pounds Simple hand grasping, power hand grasping, fine hand manipulation, reaching from foot level to above shoulder level as necessary to complete assigned tasks Operate standard/manual transmission Operate power, pneumatic tools Required to wear personal protective equipment Must meet all requirements to be Power Industrial Truck Operations (PITO) certified Work in an environment with: variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather Work cooperatively in a diverse work environment Have a sufficient ability to communicate, through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions OTHER CRITERIAEmployer will not sponsor visas for position.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position is $37.36 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.*****************This Engineering role can be filled at Entry-level, Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***********************************Entry Level - $82,500K Mid Level - $88,200 - $108,000Sr Level - $115,200- $141,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K PRIMARY PURPOSE OF POSITIONResponsible for performing engineering and technical tasks, under general supervision, in support of nuclear plant operations.PRIMARY DUTIES AND ACCOUNTABILITIESPerform engineering and technical tasks as assigned by supervision applying general engineering principles.Assure all engineering products prepared are in accordance with applicable safety analyses, industry codes, engineering specifications and all regulatory requirements.Participate in the development and implementation of effective processes and techniques at appropriate levels of detail and in compliance with established policies and procedures.Recommend format and methodology improvements to standard processes and procedures.MINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Entry Level E01 Engineer &ndash New GraduateE1- B.S in EngineeringMINIMUM QUALIFICATIONS for Mid-level E02 Engineer B.S. in Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Engineering or Licensed Professional Engineer and 5+ years engineering experience PREFERRED QUALIFICATIONSEngineer in training certificationGood grasp of techniques and a good understanding of the fundamental functions performed by the group

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or .Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters.Job Location: Camp Hill, PAJob Type: Full TimeShift(s) Available: 1stCompensation: $21.49/hrBenefits InformationMedical, Dental, Vision, and Prescription Drug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill Matching ContributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Tuition ReimbursementEmployee DiscountsPrincipal AccountabilitiesWorking in a repetitive and fast-paced environment to complete various processes including weighing, bagging, packing, unpacking, labeling, and boxing of meat productsGeneral use of a knife or other tools/machinery to process meat, including but not limited to trimming and removing fat, defects, or contamination from muscle or tissueMonitoring and programming machinery to ensure process efficiencyUnderstanding and adhering to all safety rules and regulationsMaintaining a safe and clean work environmentExposure to wet and/or humid conditions in a warm or cool environment, as well as slippery surfaces at varied heightsExposure to moving mechanical parts in a fast-paced environmentStanding for long periods of time, the use of stairs, and wearing personal protective equipment (PPE) in designated areas of the facilityOther duties as assignedRequired QualificationsMust be eligible to work in the United States without Visa sponsorshipMust be 18 years or olderPreferred QualificationsPrior experience operating food processing equipmentPrior experience using a knife in a production or equivalent environmentPrior meat processing experiencePrior experience in a repetitive industrial or fast-paced environmentPlease note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/VetTo apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment