FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

ManTech seeks a motivated, career and customer-oriented Hardware Engineer to join our team in Ft. Meade, MD. This is a full time position with 5 days being onsite. This position is part of a team that provides engineering and Information Technology services to provision, manage, sustain, innovate, modernize, refresh, reengineer, and secure the Nuclear Command and Control (NC2) and Non-NC2 cryptographic production infrastructure.Responsibilities include but are not limited to:Analyzing hardware specifications and system/subsystem requirements to conceive and document a practical design for hardware components to include servers, network devices, transmission media, storage devices, user interface devices, and special processors.Ensuring problems with operational hardware have been properly identified and solutions satisfy user’s requirements while preparing functional requirements and specification for hardware acquisitionsDeveloping hardware installation schedules based upon set-up, integration, and test timeliness while assisting with preparing installation guides, field test procedures, and troubleshooting guides.Conduct site surveys, assesses and documents current site network configuration and site-unique requirements, preparing engineering plans and site installation Technical Design Packages, configuring computers, communications devices and peripheral equipmentResponsible for scheduling requested evaluations submitted from vendors, receiving, unpacking, and setting up submitted commercial equipment for evaluation and setting up appropriate tools and sensors to support evaluations.Minimum Qualifications: Bachelor’s degree in communications engineering, Computer Engineering, Computer Science, Electrical Engineering, Information Systems, Mathematics, or related discipline from an accredited college or university and 7 years of experience as a Hardware Engineer analyzing complex hardware systems for SIGINT solutions. is required.Five (5) years of additional hardware engineering experience may be substituted for a bachelor’s degree.Experience with VHDL, Vilinx, Vivado or similar tools/technologies is requriedClearance Requirements:Must have a current/active TS/SCI w/ PolygraphPhysical Requirements:Must be able to remain in a stationary position for extended periods of time. Needs to occasionally move about inside the office to access file cabinets, office machinery, etc. Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine and computer printer. Must be able to move vendor equipment

Overview: Ready to drive financial accuracy and project success As a Project Engineer, you will track and analyze cost data, ensuring our projects stay on budget. Your expertise in resource monitoring and control, combined with your construction knowledge, will keep our projects running smoothly and efficiently.Apply now and transform your career with us. What you will be doing: Meet with engineering and field crews to review production schedule and confirm all materials, equipment and resources.Review all shop drawings, design specifications, material requirements and project data.Provides technical input for project work plan and scheduling.Identify risk elements of production, materials, equipment or process that could negatively impact the budget or schedule.Evaluate daily production, schedule and budget projections to accurately track project performance.Update project schedule weekly for owner and management reporting.Prepare and manage a three-week work plan. Notifies engineering and project management of any significant schedule changes and develops solutions to mitigate delays and cost.Initiate and manage all Requests for Information (RFIs).Remit accurate project quantities using assigned project cost coding to ensure project financials are accurately reported.Manage invoicing with accounting team regarding materials, equipment and subcontractor needs.Review certificates and permits needed to perform work.Review required Job Hazard Analysis (JHAs) to ensure a safe and compliance work environment for all construction personnel.Coordinates subcontractor work methods, schedule and crews as needed. What we are looking for: Bachelor's Degree in a related field. 7+ years construction engineering experience. Experience in resource monitoring techniques (i.e. cost accounting, basic estimating) and construction technology, process systems and/or structures preferred. Specialized, technical knowledge of design build or other alternative build techniques. Able to delegate and assign work to engineering team to progress the project production forward. Advanced knowledge of contract specifications and quality assurance practices. Able to identify budget and project costs and recommend options to mitigate project delays. Knowledge of financial reporting methods, quantity tracking methods and cost coding. Knowledge of construction scheduling and production time management preferred. Why work for us: Some of the benefits you may be eligible for as an employee are:Comprehensive compensation package and paid time off programIndustry leading 401(k)/RRSPMedical/Extended Health Care, Dental, Vison and/or Provincial MedicalWellness benefits & Employee Assistance ProgramTuition Reimbursement ProgramWe are an EEO/AA/ADA/Veterans employer. Salary Min: USD $105,000.00/Yr. Salary Max: USD $115,000.00/Yr.

General Summary of PositionJob Summary:Under the general direction of the Clinical Engineering leadership team, the Imaging Specialist II is primarily responsible for tasks associated with the installation, testing, maintenance, calibration and repair of medical equipment and systems. Maintaining clinical equipment and systems considered to be advanced, specialty, highly sophisticated, integrated technology, or requiring manufacturer service training or certification, through the effective use of the medical equipment management plan, while adhering to all medical equipment policies and procedures, and manufacturer or alternative equipment maintenance (AEM) specifications. Primary Duties and ResponsibilitiesResponds to advanced support requests. Diagnoses, resolves and closes issues involving high value, complex medical equipment and systems according to service level guidelines. Services complex, specialty, highly sophisticated diagnostic imaging technology and systems. Takes part in on-call rotation, covering after-hours and weekends.Ensures that preventative maintenance is promptly performed accordingly to the established schedule. Makes daily rounds within the hospital and advanced/specialized modality areas to assure proper operation of medical equipment and systems while correcting any deviations.Orders parts, receives, inventories, assembles, inspects, and tests equipment and documents results. Coordinates efforts with supervisor and/or experienced technicians or specialists as appropriate.Inspects and tests electronic, electromechanical, and mechanical medical and scientific equipment according to specific test procedures. Verifies equipment safety and accuracy for continued use.Documents all work performed in the computerized maintenance management system (CMMS). Ensures documentation is accurate, complete and timely. Provides monthly reports as needed.Provides clear, concise, and timely follow up with colleagues, ensuring they know the status of work being performed on their equipment. Provides technical in-service or instruction to facility staff in proper operation of patient care equipment on an as-needed basis.Provides advanced support of acuity equipment for direct patient care.Reviews department/unit operations manual to ensure compliance with applicable Joint Commission standards, federal and state regulations, accepted Standards of Conduct, and the Corporate Compliance Program. Complies with all MedStar Health Policies and Procedures, Corporate Compliance Program Standards of Conduct, and all applicable statutes, rules, and regulations.Maintains orderliness and cleanliness of work areas. Maintains department facilities, equipment and materials in a condition that promotes efficiency, health, comfort and safety of patients and staff.Anticipates needs of the department, proactively suggests improvement ideas to simplify processes and assists in policy or procedure implementation. Provides information for the development of policies, procedures and records to fulfill or exceed regulatory requirements.Participates in service training of technicians concerning use and operation of equipment.Researches and makes recommendations for new medical equipment and provides support through the installation process. Completes initial inspections and completes required paperwork.Schedules and performs preventive maintenance inspections on medical devices and completes all associated paperwork in a timely and accurate manner. Is knowledgeable of applicable safety and electrical limits for healthcare equipment. May travel between various system sites or provides phone support if required. Reports problems to the Manager at the local sites if needed.May act as a Liaison between Clinical Engineering and other departments related to Medical Equipment, and other multidisciplinary systems.In conjunction with the Director of Clinical Engineering may be responsible for budget preparation and monitoring of operational/capital budget cost. May assist in evaluation, selection and installation of new equipment/systems.May oversee activities of vendors in all phases of installation and implementation of systems. Maintains effective working relationships with other departments and participates in multi-disciplinary operations, quality and service improvement teams. Minimum QualificationsEducationAssociate's degree Biomedical equipment technology, electronics or related field required or related military work/training in mechanical or electrical engineering or academic work or actual work experience aligned with AAMI's Core Competencies for the Biomedical Equipment Technician. required Experience3-4 years Experience in the repair and maintenance of diagnostic imaging technology and systems. required Licenses and CertificationsCBET - Certified Biomedical Equipment Technician Upon Hire required or must be actively pursuing CBET and obtain within 2 years required orCertified Radiology Equipment Specialist (CRES) Upon Hire required or must be actively pursuing CRES and obtain within 2 years required Knowledge, Skills, and AbilitiesAbility to anticipate tasks and prioritize assignments.Ability to input data into computer programs.Ability to travel between sites to maintain diagnostic imaging technology and systems.Ability to work with all levels of internal and external customers.Knowledge of basic electricity/electronics principles. Knowledge of hospital and department procedures and operations.Knowledge of word processing, spreadsheet and database software.Provides hospitable customer service.Skill in the use of basic and specialized hand tools and testing equipment.Well-developed verbal and written communication skills.Knowledge of Joint Commission and other regulatory agency's accreditation requirements. This position has a hiring range of $33.86 - $63.13

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.Expected salary range of $152,100 to $169,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). PRIMARY PURPOSE OF POSITION Provide management of the engineering function of accountability. PRIMARY DUTIES AND ACCOUNTABILITIESProvide management of the engineering function with respect to station needs and regulatory requirements.Manage the performance and development of assigned engineering personnel relative to site and corporate objectives and provide focus on the attainment of high-quality engineering results.Directly and through subordinates, fulfill engineering and technical leadership accountability regarding short-term and long-term programs that impact site operations.Participate as in Business Planning, Budget, and Business Performance review regarding assigned staff.Participate as senior resource to NGG-wide programs and initiatives regarding standardized and enhanced engineering systems and processes.MINIMUM QUALIFICATIONSBS in Engineering or License Professional Engineer Minimum of 5 years related experience with commercial or military nuclear power plant or other utility experienceDemonstrated technical leadership (e.g. Duty Team Lead, Inspection Lead)Teamwork and accountable to achieving positive resultsPositive Leadership Assessment PREFERRED QUALIFICATIONSProfessional Engineering RegistrationDesign Engineering experienceAdvanced technical degree, MBA

This position is available for relocation assistance!Join an amazing global healthcare organization! Check out our link to our awesome benefits - Johns Hopkins Benefits Enrollment | Your benefits virtually (mybenefitsjhhs.com)Position Summary:The Assisted Director of Facilities, is responsible for directing the daily work activities of the Facilities Engineering Department staff; engaged in the operation, maintenance and the repair of the entire physical plant including buildings grounds, utility systems and equipment.Develops departmental policies and procedures and manages their implementation in accordance with departmental strategic objectives or initiatives.Prepares staffing and budgetary plans, and manages resources to achieve department goals.Performs general managerial duties such as supervising staff, planning, scheduling, budgeting, data analysis, reporting, and performing presentations.Represents the department to customers and the Hospital to patients, visitors, or interested parties.Shift: Full-time (40 hrs per week)Day ShiftEducation Bachelor’s degree in Architecture, Engineering, Construction, Business or related field.Or, equivalent level of knowledge as obtained through 20 years of comparable experience in medical facilities, including 10 years at a manager or above level in FacilitiesExperience15 years related work experience, including 10 years in a supervisory capacity.Certifications/Licensure CHFM Preferred or the ability to get within 6 months of hireNo license requiredSalary Range: Minimum 44.31 per visit - Maximum 77.57 per visit. Compensation will be commensurate with equity and experience for roles of similar scope and responsibility.In cases where the range is displayed as a $0 amount, salary discussions will occur during candidate screening calls, before any subsequent compensation discussion is held between the candidate and any hiring authority.JHM prioritizes the health and well-being of every employee. Come be healthy at Hopkins! Diversity and Inclusion are Johns Hopkins Medicine Core Values. We are committed to creating a welcoming and inclusive environment, where we embrace and celebrate our differences, where all employees feel valued, contribute to our mission of serving the community, and engage in equitable healthcare delivery and workforce practices.Johns Hopkins Health System and its affiliates are drug-free workplace employers.

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONT&S Substation Engineering & Standards is a multi-discipline unit focusing on Civil/Structural and High Voltage (HV) Electrical disciplines. The team supports in-house design, engineering, construction, and commissioning of electric substation projects initiated by growing load demand and replacement of aging infrastructure. Projects supported by the team include transmission substation modifications and expansions, distribution substation construction and expansions, Battery Electric Storage System (BESS) siting and construction, and replacement of aging or failed equipment.The successful candidate develops and/or leads teams in studies and evaluations of new properties, site development plans, design criteria, specifications, calculations, evaluations, cost estimates, and budget development associated with the planning, design, construction, commissioning, operation, and maintenance of Exelon's electric transmission, distribution and telecommunication facilities/systems. Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, properties, equipment, or facilities. Reviews financial data from budget and actual costs of projects. Provides technical expertise to strategic, legislative and operational decisions. Participates in creating, updating, and applying internal/industry standards and technology in a specialized area of expertise. Trains and mentors' others. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESLeads and performs assignments in specialized areas requiring extensive engineering expertise. Requiring maintaining state of the art engineering credential in the specialized technical area. (25%)Leads and performs engineering tasks and projects associated with a critical or analytical engineering project or a small number of complex projects that require specialized knowledge in many areas, may include field testing troubleshooting, and peer review. (30%)Evaluates, develops, implements and leads projects that have significant financial and operational impact, may also develop initial commissioning plans. Plans, writes and performs tasks for documentation deliverables and projects (10%)Participates in department planning, through field/site walkdowns, attend meetings/conference calls, provide budget recommendations and monitor performance for the accomplishment of committed results. (5%)Performs assignments while acting independently, and may lead multi-discipline teams, may include providing direct oversight of contractors. (5%)Serves as an expert in specialized area. (5%)Acts as an expert witness or provide expert opinions as required. (5%)Provides recommendations to management and implements action plans to improve performance and cost effectiveness. (5%)Provides detailed technical training, mentorship, peer review, and/or guidance to others. (5%)Participates in technical and industry societies and committees to enhance knowledge of new technologies or issues in areas of company interest, make recommendations for business decisions regarding strategy for new technologies and/or engineering techniques and tools. (5%) Job Scope: JOB SCOPEInfluences project decisions having a significant impact on the company.Support/Lead employees and or contractors in the execution of plan development used to construct and energize utility or customer equipment/systems.Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction. Minimum Qualifications: MINIMUM QUALIFICATIONSBachelor of Science degree in Engineering or Licensed Professional Engineer (2) (3)Ability to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theoryKnowledge of engineering designs, principles and practices.Knowledge of complex field test equipment.4-7 years of professional engineering experience (1) (3) (See Note).Broad knowledge and experience with regulations, guides, standards, codes methods, practices, and advanced engineering principles necessary to perform very complex or unique assignments for a specificMinimum of two related career experiences (4) (i.e., changes in technical job responsibilities, which may or may not include a change in department) OREngineer in Training OR50% complete (by hours) with advanced technical degree, M.B.A. or Project Management Certification(1) Master's degree in Engineering reduces the OJT experience requirement by 1 year. (2) License must be issued by the state in which you are practicing. (3) PE License reduces the OJT experience requirement by 1 year. (4) Career related experiences is defined as changes in technical job responsibilities and does not have to include a change in department Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one(1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year). Preferred Qualifications: PREFERRED QUALIFICATIONSBachelors degree in Civil Engineering, or a related field, with a focus on site/land development and/or storm water management system designLand development and permitting experience in Maryland’s Baltimore, Harford, Howard, and Anne Arundel Counties and in the City of Baltimore.Experience performing site and zoning analysis for commercial and industrial usesKnowledgeable in roadway design, utility systems, storm water management design, and site grading and balancing.Engineer in Training (EIT) in Maryland (2) (3)Strong teamwork, interpersonal skills and the ability to communicate with all management levels.Strong written and oral communication skills.A working knowledge of analysis software packages such as TR-55, Autodesk Civil 3D, Autodesk Inventor, MATLAB, etc.Ability to analyze industry wide trends and implement enhancements. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $90,400.00/Yr. – $124,300.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

Develop your engineering career at JLL!The Operating Engineer supports operation, inspection and maintenance processes to mechanical, HVAC, electrical and plumbing equipment and systems.You will work as part of an engineering team in Queenstown, MD.This position requires the Operating Engineer to be on-site. Local market requirements may vary slightly.WHAT YOU’LL DO Complete assigned tasks that include but are not limited to: painting, pressure washing, cleaning, maintaining lighting system bulbs/ballasts (as allowed by any licensing requirements), plumbing, HVAC systems, water treatment, hanging pictures, repair office furniture, locksmith work and general maintenanceMaintain work order system (CMMS) daily and complete any tenant service requestsMoves office furniture, machinery, equipment, and other materials as requestedPerform assigned preventive maintenance and inspection tasksSupport on-call or emergency response situations (if applicable)Troubleshoot all building systems, including electrical, DDC and pneumatic controlsComply with all safety proceduresParticipate in ongoing technical, safety, and operational process training programsOther projects and tasks to be assignedWHAT YOU BRING TO THE TABLE3+ years of related work experience, especially in repair, maintenance, HVAC, plumbing, electrical or carpentryTrade school education, union training, military service or college is desirableUniversal CFC EPA certification or interest in achieving within first year (with JLL assistance)Experience using Microsoft Office (Word, Outlook, Excel, Teams)Ability to lift up to 50 lbsComfort using ladders up to 30 feet tallAbility to frequently climb, bend, kneel, lift and/or driveStrong customer service skillsWHAT’S IN IT FOR YOUJoin an industry leader and shape the future of commercial real estateDeep investment in cutting-edge technology to power your workComprehensive and competitive benefits planA supportive, caring and diverse work environment designed for your growth and well-being#PMR1

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America or JPMorgan Chase among other leading organizations in the Baltimore area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Business Operations - Project Management - Banking - Customer Success - IT Support - Data Analytics Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.Expected salary range of $156,600 to $174,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). PRIMARY PURPOSE OF POSITIONProvide management of the engineering function of accountability and act as backup to Technical ManagerPRIMARY DUTIES AND ACCOUNTABILITIESProvide management of the engineering function with respect to station needs and regulatory requirementsTravel to support Gas Generation assets across North East and Texas. Combined Cycle, Simple Cycle, and Steam Turbines.Manage the performance and development of assigned engineering personnel relative to site and corporate objectives and provide focus on the attainment of high-quality engineering resultsDirectly and through subordinates, fulfill engineering and technical leadership accountability regarding short-term and long-term programs that impact site operations and reliabilityParticipate in Business Planning, Budget, and Business Performance review regarding assigned staffParticipate as senior resource to fleet-wide programs and initiatives regarding standardized and enhanced engineering systems and processesMINIMUM QUALIFICATIONS BS Degree in Engineering or Licensed Professional Engineer 5+ years Engineering experience with 5+ years Power Plant, Industrial or Manufacturing experience Power Generation Experience Demonstrated technical leadership (e.g. Duty Team Lead, Inspection Lead) Successful FLS Selection Testing PREFERRED QUALIFICATIONS Professional Engineering Registration Advanced technical degree, MBA

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONTransmission and Substation Engineering & Standards is a multi-discipline unit focusing on High Voltage (HV) Electrical, System Protection & Control (SPC) and Civil/Structural (CV) disciplines. The team supports internal and external design, engineering, construction, and commissioning of electric substation projects initiated by growing load demand and replacement of aging infrastructure. Projects supported by the team include transmission substation modifications and expansions, distribution substation construction and expansions, and replacement of aging or failed equipment.The Principal Engineer/Subject Matter Expert (SME) possesses specialized knowledge and experience in the design, selection, installation, and maintenance of critical substation equipment, such as, Circuit Breakers, Capacitors, Switchgear, Gas Insulated Switchgear, Battery Energy Storage Systems, STATCOM, etc... The candidate will have experience in the design & execution of complete high voltage transmission and distribution substations, with relevant projects on applications that range from 4kV to 500kV.The successful candidate develops and/or leads teams in studies, plans, design criteria, specifications, calculations, evaluations, cost estimates, budgets, associated with the planning, design, construction, operation, and maintenance of Exelon's electric, transmission, distribution, and telecommunication facilities/systems.Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, properties, equipment, or facilities. Reviews financial data from budget and actual costs of projects. Provides technical expertise to strategic, legislative, and operational decisions. Participates in creating, updating, and applying internal/industry standards and technology in a specialized area of expertise. Trains and mentors’ others. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESLeads and performs assignments in specialized areas requiring extensive engineering expertise. Requiring maintaining state of the art engineering credential in the specialized technical area. (25%)Leads and performs engineering tasks and projects associated with a critical or analytical engineering project or a small number of complex projects that require specialized knowledge in many areas, may include field testing troubleshooting, and peer review. (30%)Evaluates, develops, implements and leads projects that have significant financial and operational impact, may also develop initial commissioning plans. Plans, writes and performs tasks for documentation deliverables and projects (10%)Participates in department planning, through field/site walkdowns, attend meetings/conference calls, provide budget recommendations and monitor performance for the accomplishment of committed results. (5%)Performs assignments while acting independently, and may lead multi-discipline teams, may include providing direct oversight of contractors. (5%)Serves as an expert in specialized area. (5%)Acts as an expert witness or provide expert opinions as required. (5%)Provides recommendations to management and implements action plans to improve performance and cost effectiveness. (5%)Provides detailed technical training, mentorship, peer review, and/or guidance to others. (5%)Participates in technical and industry societies and committees to enhance knowledge of new technologies or issues in areas of company interest, make recommendations for business decisions regarding strategy for new technologies and/or engineering techniques and tools. (5%) Job Scope: JOB SCOPEInfluences project decisions having a significant impact on the company.Support/Lead employees and or contractors in the execution of plan development used to construct and energize utility or customer equipment/systems.Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction. Minimum Qualifications: MINIMUM QUALIFICATIONSMaster of Science degree in Engineering or Licensed Professional Engineer.Ability to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theory.Knowledge of engineering designs, principles and practices. 8+ years of experience in specific areas of engineering and recognized industry expert (Requirement reduced by one year for Licensed Professional Engineer) Advanced knowledge and experience with regulations, guides, standards, codes, methods, practices, and advanced engineering principles. Advanced knowledge of latest technologies necessary to perform a variety of specialized unique or complex assignments for various installation types of services. Industry expert who participates or leads industry committee or working groups or has published technical documents Note: there are a limited number of personnel available in the industry with the required knowledge, ability and experience. License must be issued by the state in which you are practicing Preferred Qualifications: PREFERRED QUALIFICATIONSStrong teamwork, interpersonal skills and the ability to communicate with all management levels.Strong written and oral communication skills.Strong background in Forensic Analysis and ability to conduct investigations, identify patterns, and help derive actionable insights from complex datasets.A working knowledge of analysis software packages such as ASPEN, CDEGS, Autodesk, Autodesk Inventor, MATLAB, etc.Ability to analyze industry wide trends and implement enhancements. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $120,000.00/Yr. – $165,000.00/Yr. Annual Bonus for eligible positions: 20% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America or JPMorgan Chase among other leading organizations in the Baltimore area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Business Operations - Project Management - Banking - Customer Success - IT Support - Data Analytics Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.**This Analyst role can be filled at the Mid-level or Senior level. Please see minimum qualifications list below for each level**Expected Salary Range:Mid-level: $ 84,000 - $ 104,00Senior Level: $109,000- $142,000 PRIMARY PURPOSE OF POSITIONPerforms advanced technical/engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.PRIMARY DUTIES AND ACCOUNTABILITIESProvides in-depth technical expertise to develop, manage and implement engineering activities and programs.Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.Provides initial or complete task management of engineering issues.Perform engineering and technical tasks as assigned by supervision applying general engineering principlesAccountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.Perform independent research, reviews, studies and analyses in support of technical projects and programs.Recommends equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.MINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Engineering Analyst/E024-yr tech degree and 2+ yrs of nuclear or related industry experience OR2-yr tech degree and 3+ yrs of nuclear or related industry experience ORHigh School Diploma and a min of 5 years applicable nuclear experienceMINIMUM QUALIFICATIONS for Engineering Analyst/E034-yr tech degree and 5 + yrs of nuclear or related industry experience2-yr tech degree and 7+ yrs of nuclear or related industry experienceHigh School Diploma and a min of 8 years nuclear experience Previous electrical maintenance or electrical engineering experitise working with large circuit breakers and transformers.

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONDevelops studies, plans, criteria, specifications, calculations, evaluations, design documents, performance assessments, integrated systems analysis, cost estimates, budgets, associated with the planning, design, licensing, construction, commissioning, operation, and maintenance of Exelon's electric generation, transmission, distribution, gas and telecommunication facilities/systems. Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, processes, equipment, vehicles or facilities. Reviews financial data from budget and actual costs of projects. Operates independently and seeks guidance when appropriate. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies.**Posting Notes** This position is in the BSC Transmission Operations Support - Compliance & Procedures group. The team supports the Exelon TSO Control Rooms with reviewing, updating, and creating Procedures and Job Aids as well as ensuring compliance to all applicable NERC Standards. Support includes documenting and tracking evidence of Compliance and participating in Compliance Audits by PJM as well as Reliability First. May be required to assist with training on procedures at times. A compliance background and or experience in any Transmission & Substation Organizations, Operations, or Control Room environment is desirable. There is opportunity to utilize automation tools and innovation for efficiency. The position is based out of our Exelon facility in Woodlawn, MD and some travel is required.Note: This is a hybrid position (in-office with remote flexibility). Employees are required to be in office at least three days per week (Tuesday, Wednesday, and Thursday). This position must sit out of our Woodlawn, MD office. This position is not eligible for relocation assistance. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESPerforms engineering tasks associated with critical engineering projects or a number of small projects with many complex features.Performs assignments in areas where engineering precedents are incomplete, lacking or require broad experience.Evaluates, develops and implements projects that have moderate financial and operational impact.May serve as an expert for organization in a specific area or responsibility that may include the delivery of classroom training and/or OJT/OJE. Job Scope: JOB SCOPEInfluences project decisions having a moderate impact on the company that may include leading employees or contractors in the commissioning of electrical systems and equipment to be placed On System. Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction. Minimum Qualifications: MINIMUM QUALIFICATIONS Bachelor of Science degree in Engineering or Licensed Professional Engineer (2) (3) Ability to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theoryKnowledge of engineering designs, principles and practices.Knowledge of complex field test equipment. 4-7 years of professional engineering experience (1) (3) (See Note).Broad knowledge and experience with regulations, guides, standards, codes methods, practices, and advanced engineering principles necessary to perform very complex or unique assignments for a specificMinimum of two related career experiences (4) (i.e., changes in technical job responsibilities, which may or may not include a change in department) OREngineer in Training OR50% complete (by hours) with advanced technical degree, M.B.A. or Project Management Certification(1) Master's degree in Engineering reduces the OJT experience requirement by 1 year. (2) License must be issued by the state in which you are practicing. (3) PE License reduces the OJT experience requirement by 1 year. (4) Career related experiences is defined as changes in technical job responsibilities and does not have to include a change in department Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one(1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year). Preferred Qualifications: PREFERRED QUALIFICATIONSGraduate degree (1) or Graduate level work in Engineering, Business Administration or Project Management CertificationLicensed Professional Engineer (2) (3)Strong teamwork, interpersonal skills and the ability to communicate with all management levels.Strong written and oral communication skills. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $90,400.00/Yr. – $124,300.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.***This Engineering role can be filled at the Entry, Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***Expected salary range:Entry Level - $82,500Mid-Level - $88,000 - $108,000Sr Level - $115,000- $141,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K.MINIMUM QUALIFICATIONS for Entry Level E01 Engineer &ndash New GraduateB.S in EngineeringMINIMUM QUALIFICATIONS for Mid-level E02 EngineerB.S. in Engineering, a minimum 2 years Nuclear experience or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Engineering, a minimum 5 years Nuclear experience or related engineering experience Role: I&C Design EngineerJob Description:Prepare/Review Internal calculationsPrepare/Review Engineering Changes (EC&rsquos) for Distributed Control Systems (DCS), Human-Machine Interfaces (HMI), and Programmable Logic Controllers (PLC) applications, single loop controllers and field sensors.Prepare component and control system hardware design, software verification, validation, network design, and configuration.Review software hazards analysis, Failure Modes and Effects Analysis (FMEA), and human factors engineeringDevelop the engineering cost estimate, schedule, and project specification.Participate in the bid specification preparation and vendor bid selection process.When engineering services are contracted, perform owners acceptance reviews, maintain responsibility for the work and manage schedule and cost.Plant Outage and Online Support for Modifications as requiredPerform technical and engineering problem-solving tasks to support nuclear plant operations. PREFERRED QUALIFICATIONSProfessional Engineer RegistrationAdvanced technical degree or related coursework

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONDevelops and/or leads teams in studies, plans, criteria, specifications, calculations, evaluations, design documents, performance assessments, integrated systems analysis, cost estimates, budgets, associated with the planning, design, licensing, construction, commissioning, operation, and maintenance of Exelon's electric generation, transmission, distribution, gas and telecommunication facilities/systems. Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, processes, equipment, vehicles or facilities. Reviews financial data from budget and actual costs of projects. Provides technical expertise to strategic, legislative and operational decisions. Participates in creating, updating, and applying internal/industry standards and technology in a specialized area of expertise. Trains and mentors others. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies.**Posting Notes**This position is in the BSC Transmission Operations Support - Compliance & Procedures group. The team supports the Exelon TSO Control Rooms with reviewing, updating, and creating Procedures and Job Aids as well as ensuring compliance to all applicable NERC Standards. Support includes documenting and tracking evidence of Compliance and participating in Compliance Audits by PJM as well as Reliability First. May be required to assist with training on procedures at times. A compliance background and or experience in any Transmission & Substation Organizations, Operations, or Control Room environment is desirable. There is opportunity to utilize automation tools and innovation for efficiency. The position is based out of our Exelon facility in Woodlawn, MD and some travel is required.Note: This is a hybrid position (in-office with remote flexibility). Employees are required to be in office at least three days per week (Tuesday, Wednesday, and Thursday). This position must sit out of our Woodlawn, MD office. This position is not eligible for relocation assistance. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESLeads and performs assignments in specialized areas requiring extensive engineering expertise. Requiring maintaining state of the art engineering credential in the specialized technical area.Leads and performs engineering tasks and projects associated with a critical or analytical engineering project or a small number of complex projects that require specialized knowledge in many areas, may include field testing troubleshooting, and peer review.Evaluates, develops, implements and leads projects that have significant financial and operational impact, may also develop initial commissioning plans. Plans, writes and performs tasks for documentation deliverables and projectsParticipates in department planning, through field/site walkdowns, attend meetings/conference calls, provide budget recommendations and monitor performance for the accomplishment of committed results.Performs assignments while acting independently, and may lead multi-discipline teams, may include providing direct oversight of contractors.Serves as an expert in specialized area.Acts as an expert witness or provide expert opinions as required.Provides recommendations to management and implements action plans to improve performance and cost effectiveness.Provides detailed technical training, mentorship, peer review, and/or guidance to others.Participates in technical and industry societies and committees to enhance knowledge of new technologies or issues in areas of company interest, make recommendations for business decisions regarding strategy for new technologies and/or engineering techniques and tools. Job Scope: JOB SCOPEInfluences project decisions having a significant impact on the company.Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction Minimum Qualifications: MINIMUM QUALIFICATIONSBachelor of Science degree in Engineering or Licensed Professional Engineer (2) (3) Knowledge of engineering designs, principles and practicesAbility to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theory.Detailed knowledge of applicable standards, codes methods, and practices unique to areas of expertise. 7+ years of professional engineering experience (1) (3) (See Note 3. Thorough knowledge and experience in unique areas of engineering expertise. Ability to apply advanced engineering principles to identify and resolve complex issues. Minimum of three related career experiences (4) (i.e., changes in technical job responsibilities, which may or may not include a change in department) OR Lead Member of a recognized industry committee OR Professional Engineer's License (2), advanced technical degree, MBA or Project Management Certification (1) Master's degree in Engineering reduces the OJT experience requirement by 1 year. (2) License must be issued by the state in which you are practicing. (3) PE License reduces the OJT experience requirement by 1 year. (4) Career related experiences is defined as changes in technical job responsibilities and does not have to include a change in department.Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one (1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year). Preferred Qualifications: PREFERRED QUALIFICATIONS Graduate degree (1) or Graduate level work in Engineering, Business Administration or Project Management Certification Licensed Professional Engineer (2) (3) Strong teamwork, interpersonal skills and the ability to communicate with all management levels. Strong written and oral communication skills. A working knowledge of analysis software packages such as CYMDIST, PSS\E, Python, PSCAD, MATLAB, etc. Ability to analyze industry wide trends and implement enhancements. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $100,800.00/Yr. – $138,600.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.*****************This Engineering role can be filled at Entry-level, Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***********************************Entry Level - $82,500K Mid Level - $88,200 - $108,000Sr Level - $115,200- $141,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K PRIMARY PURPOSE OF POSITIONPerforms advanced engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses superior knowledge in functional discipline and its practical application and has excellent knowledge of applicable industry codes and regulations. Functions with recognized industry-level of expertise in a technical area.PRIMARY DUTIES AND ACCOUNTABILITIESPerform advanced engineering and technical tasks in support of nuclear plant operations.Perform independent research, reviews, studies and analyses in support of technical projects.Provides in-depth technical expertise to develop, manage and implement engineering activities related to plant safety, reliability, maintainability, and availability ensuring compliance to customer's needs, regulatory requirements, and corporate policies.Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices and codes are used in preparation of plans and specifications.Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.Provides initial or complete task management of engineering issues.Recommends equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.Supports plant design modifications, testing and problem solving.Assure all engineering products prepared or overseen are in accordance with applicable safety analyses, industry codes, and all regulatory requirements.Develop, implement and coordinate functional supervisory activities including, but not limited to, personnel, budgetary accountabilities and planning goals with respect to engineering personnel.MINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Entry Level E01 Engineer &ndash New GraduateE1- B.S in EngineeringMINIMUM QUALIFICATIONS for Mid-level E02 Engineer B.S. in Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Engineering or Licensed Professional Engineer and 5+ years engineering experience PREFERRED QUALIFICATIONSProfessional Engineering Registration, advanced technical degree or coursework

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITION Develops and/or leads teams of employees or contractors in studies, plans, criteria, specifications, calculations, evaluations, design documents, integrated systems analysis, associated with the testing, commissioning, planning, design, licensing, construction, operation, and maintenance of Exelon's electric generation, transmission, distribution, gas, telecommunication, P&C communication, facilities/systems. Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, processes, equipment, or facilities. Acts as recognized technical authority in a specialized engineering area which may involve witnessing of Factory Acceptance Tests. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESLeads highly technical consultation and training through OJT/OJE (may include some class room instruction as well) on highly complex and unique technical areas requiring the application of advanced engineering principles and may require advanced knowledge of complex analog and digital field test equipment. (25%)Evaluates complex technical issues that require highly specialized knowledge in very specific areas and recommends actions or programs for their resolution which may necessitate the review/evaluation of engineering design documents. (25%)Leads the work activities of project teams and others on the implementation of large specialized technical projects and/or programs in order to develop studies, proposals, commissioning plans to support safely energizing and placing major utility and customer systems and equipment On System. (25%)Participates in technical and industry societies and committees to enhance knowledge of new technologies or issues in area of company interest. (10%)Participates in department/project management planning, and monitor performance for the accomplishment of committed results. (10%)Acts as an expert witness and provide expert opinions for internal committees. (5%) Job Scope: JOB SCOPEHighly influential on strategic management decisions that can have a major impact on the company. Support/Lead employees and or contractors in the execution of plans developed to initially energize utility or customer equipment/systems and placed On System.Set direction for the organization in regards to technical issues.Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction Minimum Qualifications: MINIMUM QUALIFICATIONSBachelor's degree in Engineering discipline with at least 7 years of professional engineering experience. (1) (3) (See Note)Completed Assignments and Projects showing evidence of:Ability to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theory.Knowledge of engineering designs, principles and practices.Advanced knowledge and experience with regulations, guides, standards, codes, methods, practices, and advanced engineering principles (2).Advanced knowledge of latest technologies necessary to perform a variety of specialized unique or complex assignments for various installation types of services. *Note: there are a limited number of personnel available in the industry with the required knowledge, ability and experience. (1) Master's degree in Engineering reduces the OJT experience requirement by 1 year. (2) License must be issued by the state in which you are practicing. (3) PE License reduces the OJT experience requirement by 1 year. Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one (1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year. Preferred Qualifications: PREFERRED QUALIFICATIONSStrong teamwork, interpersonal skills and the ability to communicate with all management levels. Strong written and oral communication skills. Demonstrated ability to lead the work activity of others. Master of Science degree in Engineering (1) or Licensed Professional Engineer (2) (3) Industry expert who participtes or leads industry committee or working groups or has published technical documents. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $109,600.00/Yr. – $150,700.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.