SEARCH
GO
Engineering Jobs
Full Time
5/7/2025
Baltimore, MD 21239
(41.9 miles)
General Summary of PositionJob Summary:Under the general direction of the Clinical Engineering leadership team, the Imaging Specialist II is primarily responsible for tasks associated with the installation, testing, maintenance, calibration and repair of medical equipment and systems. Maintaining clinical equipment and systems considered to be advanced, specialty, highly sophisticated, integrated technology, or requiring manufacturer service training or certification, through the effective use of the medical equipment management plan, while adhering to all medical equipment policies and procedures, and manufacturer or alternative equipment maintenance (AEM) specifications. Primary Duties and ResponsibilitiesResponds to advanced support requests. Diagnoses, resolves and closes issues involving high value, complex medical equipment and systems according to service level guidelines. Services complex, specialty, highly sophisticated diagnostic imaging technology and systems. Takes part in on-call rotation, covering after-hours and weekends.Ensures that preventative maintenance is promptly performed accordingly to the established schedule. Makes daily rounds within the hospital and advanced/specialized modality areas to assure proper operation of medical equipment and systems while correcting any deviations.Orders parts, receives, inventories, assembles, inspects, and tests equipment and documents results. Coordinates efforts with supervisor and/or experienced technicians or specialists as appropriate.Inspects and tests electronic, electromechanical, and mechanical medical and scientific equipment according to specific test procedures. Verifies equipment safety and accuracy for continued use.Documents all work performed in the computerized maintenance management system (CMMS). Ensures documentation is accurate, complete and timely. Provides monthly reports as needed.Provides clear, concise, and timely follow up with colleagues, ensuring they know the status of work being performed on their equipment. Provides technical in-service or instruction to facility staff in proper operation of patient care equipment on an as-needed basis.Provides advanced support of acuity equipment for direct patient care.Reviews department/unit operations manual to ensure compliance with applicable Joint Commission standards, federal and state regulations, accepted Standards of Conduct, and the Corporate Compliance Program. Complies with all MedStar Health Policies and Procedures, Corporate Compliance Program Standards of Conduct, and all applicable statutes, rules, and regulations.Maintains orderliness and cleanliness of work areas. Maintains department facilities, equipment and materials in a condition that promotes efficiency, health, comfort and safety of patients and staff.Anticipates needs of the department, proactively suggests improvement ideas to simplify processes and assists in policy or procedure implementation. Provides information for the development of policies, procedures and records to fulfill or exceed regulatory requirements.Participates in service training of technicians concerning use and operation of equipment.Researches and makes recommendations for new medical equipment and provides support through the installation process. Completes initial inspections and completes required paperwork.Schedules and performs preventive maintenance inspections on medical devices and completes all associated paperwork in a timely and accurate manner. Is knowledgeable of applicable safety and electrical limits for healthcare equipment. May travel between various system sites or provides phone support if required. Reports problems to the Manager at the local sites if needed.May act as a Liaison between Clinical Engineering and other departments related to Medical Equipment, and other multidisciplinary systems.In conjunction with the Director of Clinical Engineering may be responsible for budget preparation and monitoring of operational/capital budget cost. May assist in evaluation, selection and installation of new equipment/systems.May oversee activities of vendors in all phases of installation and implementation of systems. Maintains effective working relationships with other departments and participates in multi-disciplinary operations, quality and service improvement teams. Minimum QualificationsEducationAssociate's degree Biomedical equipment technology, electronics or related field required or related military work/training in mechanical or electrical engineering or academic work or actual work experience aligned with AAMI's Core Competencies for the Biomedical Equipment Technician. required Experience3-4 years Experience in the repair and maintenance of diagnostic imaging technology and systems. required Licenses and CertificationsCBET - Certified Biomedical Equipment Technician Upon Hire required or must be actively pursuing CBET and obtain within 2 years required orCertified Radiology Equipment Specialist (CRES) Upon Hire required or must be actively pursuing CRES and obtain within 2 years required Knowledge, Skills, and AbilitiesAbility to anticipate tasks and prioritize assignments.Ability to input data into computer programs.Ability to travel between sites to maintain diagnostic imaging technology and systems.Ability to work with all levels of internal and external customers.Knowledge of basic electricity/electronics principles. Knowledge of hospital and department procedures and operations.Knowledge of word processing, spreadsheet and database software.Provides hospitable customer service.Skill in the use of basic and specialized hand tools and testing equipment.Well-developed verbal and written communication skills.Knowledge of Joint Commission and other regulatory agency's accreditation requirements. This position has a hiring range of $33.86 - $63.13
Full Time
5/2/2025
Harrisburg, PA 17102
(23.1 miles)
WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.Expected salary range of $156,600 to $174,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). PRIMARY PURPOSE OF POSITIONProvide management of the engineering function of accountability and act as backup to Technical ManagerPRIMARY DUTIES AND ACCOUNTABILITIESProvide management of the engineering function with respect to station needs and regulatory requirementsTravel to support Gas Generation assets across North East and Texas. Combined Cycle, Simple Cycle, and Steam Turbines.Manage the performance and development of assigned engineering personnel relative to site and corporate objectives and provide focus on the attainment of high-quality engineering resultsDirectly and through subordinates, fulfill engineering and technical leadership accountability regarding short-term and long-term programs that impact site operations and reliabilityParticipate in Business Planning, Budget, and Business Performance review regarding assigned staffParticipate as senior resource to fleet-wide programs and initiatives regarding standardized and enhanced engineering systems and processesMINIMUM QUALIFICATIONS BS Degree in Engineering or Licensed Professional Engineer 5+ years Engineering experience with 5+ years Power Plant, Industrial or Manufacturing experience Power Generation Experience Demonstrated technical leadership (e.g. Duty Team Lead, Inspection Lead) Successful FLS Selection Testing PREFERRED QUALIFICATIONS Professional Engineering Registration Advanced technical degree, MBA
Full Time
5/7/2025
New Freedom, PA 17349
(14.5 miles)
Build your best future with the Johnson Controls team!Who We Are:YORK® Chiller Solutions from Johnson Controls, help customers respond to building efficiency needs by providing the widest variety water and air-cooled industrial and commercial chillers on the market. From reducing a facility’s carbon footprint, to delivering a healthier indoor environment and cutting energy costs, we build smaller, more energy efficient chillers tailored to fit almost any comfort or process cooling application – even heating. This role will be based in the Johnson Controls Advanced Development Engineering Center (JADEC) in New Freedom, PA. Candidates must be located within a commutable distance from the facility or be willing to relocate. Get excited!...take a look at where you'll work. Johnson Controls Advanced Development and Engineering Center (JADEC)What We Offer:Competitive salaryHybrid work opportunity (upon the completion of training)Paid vacation/holidays/sick timeComprehensive benefits package including 401K, medical, dental, and vision care– available day one!On the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do:This position is within the water-cooled chiller product engineering team. We are seeking a senior engineer to work on chiller PLC control solutions for both new product and chiller retrofit opportunities. The role would focus on both software and hardware solutions for chiller PLC products. As Senior Engineer within our Chillers product development team, you will be responsible for electrical analysis, detailed design, and control, as well as overall electrical performance of sophisticated water-cooled chillers components and systems, including providing support to manufacturing and applications engineering. In this role you will work on control systems for new industrial chiller applications as well as retrofits, hardware design, design test and sustain control panels and system wiring.How You Will Do It:Develop and maintain electronic hardware and software (temperature sensors, pressure sensors, flow sensors, and A-B software).Design of analog and digital interface circuits, development of power supply circuits and/or selection of power supplies.Perform the worst-case circuit analysis and incorporation of appropriate reliability principles to ensure reliable operation over the environmental specifications.Assist chiller team to develop, test and support chiller system controls (This includes selection of system components and accurate interfacing of them to electronic control panel I/O). Acquire agency approvals such as UL, CE and FCC on Printed Circuit boards and Electronic Panels.Independently conduct and apply costing analysis to feasibility studies on proposed designs or modifications to existing designs.Develop schedules which accurately reflect the project breakthroughs and implement to them.Integrate new and modify existing processes to cover all phases of the electronic development process.Provide mentorship and support to:Drafters and DesignersService and Field TechniciansManufacturing on Commercial Systems products.Provide mentorship to drafters and support Service and Manufacturing on Commercial Systems products.Prepares and participates in design reviews.Learns and applies regulatory codes such as UL, NEC, CSA, and CE codes.Proficient at capturing and analyzing test data to identify electrical performance problems and propose solutions for corrections.What We Look For:RequiredBSEE,BSEET, BSEMET,or related fieldPreferred candidate to have 5 years of valid experience with one or more of the following.PLC programming and troubleshooting.HVAC systems and controls.Automation control systems.Electrical systems, wiring diagrams, and troubleshooting (24VDC, 120VAC, & 240VAC).Ability to work in a fast-paced, schedule driven, team-oriented environment.Ability to program and debug PLC programs.Ability to identify obsolete parts for PLCs, HMIs, Network switches and protocol translators for customer upgrades.Provides secondary level product support to the field after product technical support resources are exhausted for PLC applications.Experience with Allen Bradley PLCs and Rockwell software (rslinx, FactoryTalk, Studio 5000, Activation Manager, etc.).Good verbal and written communication skills are required.Must be willing and able to travel domestically and internationally as required (up to 10% of time).PreferredUnderstands chiller controls.Familiarity with HVAC Systems and motor driven mechanical engineering design and test, alternative experience with gas compression would be advantageous.Chiller PLC experience.#Hybrid#ElectricalEngineer
Full Time
5/9/2025
Owings Mills, MD 21117
(36.9 miles)
Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:Bioprocess Applications Engineer - Biopharma (Solventum)We arepleased to announce that Solventum has entered into a definitive agreement to sell ourPurification &Filtration business to ThermoFisher Scientific. This transaction is anticipated to be completed by the end of 2025, subject to the satisfaction of customary closing conditions, receipt of regulatory approvals,andcountry specific informationandconsultation needs where required. This is a significant milestonefor theP&Fbusinessandwill allowfor the strategic investmentandresources neededfor sustaining growthanddelivering customer solutions. By joining us during this transitionalperiod, you will be able to work alongside an energizedandmission-driven team who is experiencing this transition along with you. Until then, Solventum will continue to operate as a unified entity,andemployment is subject to all applicable termsandconditions as setforth in our employment agreementandcompanypolicies.The Impact You’ll Make in this Role:As a Bioprocess Applications Engineer, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by utilizing Solventum’s technologies to improve our customer’s manufacturing processes, many of which are for lifesaving medicines. This will include:Designing and executing experiments from lab to manufacturing scale and analyzing data to help current and prospective customers find the optimal solution for their processesProviding support, guidance and training to existing and prospective clientsBuilding strong peer-to-peer technical relationships with our current and prospective customersBeing the voice of the customer within Solventum by providing market insights to support customer-centric sales, marketing activities and product development activitiesDevelop into a regional bioprocessing expert in the industry through extensive collaborations across Solventum’s customer base including on joint publications, presentations, and industry participation to elevate Solventum’s reputation within the bioprocessing communityThis position can be adapted to accommodate varying levels of experience and education, ranging from junior to senior roles.Your Skills and Expertise:To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:Bachelor’s degree, master’s or higher in a Science or Engineering disciplineTwo (2) or more years of bioprocess process development (PD) and/or manufacturing science and technology (MSAT) experience in a clinical or commercial environmentTwo (2) years of customer support and/or managing vendor relationships and engagements.Experienced in general analytical methods to characterize process fluids (ex: HPLC, ELISA, PCR and DLS)Working knowledge of purification processes in the Biopharmaceutical industryAdditional qualifications that could help you succeed even further in this role include:Ph.D. in Chemical Engineering, Biochemical Engineering, Bioengineering, or related discipline from an accredited institutionExperience in on-site and remote support to biopharmaceutical companies (small to large scale companies) for filter selection and sizing, process optimization, troubleshooting, and scale-upWorking knowledge of protein purification processesExperience evaluating filtration steps to optimize key process parameters with a distinct focus on process economics modelingTrack record of technical collaborations across internal and external organizations, professional technical conference presentations and peer-reviewed publications.Experience supporting the customer through FDA drug approval process in proteins, vaccines, and viral vectors in recombinant protein biopharmaceutical processWorking knowledge of advanced modality processing such as gene and cell therapyWork location:Remote: Candidate must reside in one of the following states :NC,MD,PA, NJTravel:To customer sites in territory and supporting other sites on the East Coast. Domestic travel up to 40%. International travel may be included, up to 5%.Relocation Assistance: May be authorizedSupporting Your Well-being: Solventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.Applicable to US Applicants Only:The expected compensation range for this position is $119,076 - $145,537, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: https://www.solventum.com/en-us/home/our-company/careers/#Total-RewardsResponsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Please note, Solventum does not expect candidates in this position to perform work in the unincorporated areas of Los Angeles County.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.
Full Time
5/4/2025
Delta, PA 17314
(26.7 miles)
WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.**This Analyst role can be filled at the Mid-level or Senior level. Please see minimum qualifications list below for each level**Expected Salary Range:Mid-level: $ 84,000 - $ 104,00Senior Level: $109,000- $142,000 PRIMARY PURPOSE OF POSITIONPerforms advanced technical/engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.PRIMARY DUTIES AND ACCOUNTABILITIESProvides in-depth technical expertise to develop, manage and implement engineering activities and programs.Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.Provides initial or complete task management of engineering issues.Perform engineering and technical tasks as assigned by supervision applying general engineering principlesAccountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.Perform independent research, reviews, studies and analyses in support of technical projects and programs.Recommends equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.MINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Engineering Analyst/E024-yr tech degree and 2+ yrs of nuclear or related industry experience OR2-yr tech degree and 3+ yrs of nuclear or related industry experience ORHigh School Diploma and a min of 5 years applicable nuclear experienceMINIMUM QUALIFICATIONS for Engineering Analyst/E034-yr tech degree and 5 + yrs of nuclear or related industry experience2-yr tech degree and 7+ yrs of nuclear or related industry experienceHigh School Diploma and a min of 8 years nuclear experience Previous electrical maintenance or electrical engineering experitise working with large circuit breakers and transformers.
Full Time
5/1/2025
York, PA 17404
(0.7 miles)
ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday
Full Time
4/27/2025
Waynesboro, PA 17268
(44.9 miles)
What You Will Do:We would like you to perform electrical project engineering functions that include, but are not limited to, design of packaged equipment control and wiring systems, processing orders, cost estimating, establishing standards, and interfacing with customers. This position is not eligible for Visa sponsorship.***Preference given to candidates residing in or within a commutable distance from Waynesboro, PA***How You Will Do It:Various application, estimating and project assignments.Selecting and/or specifying controls and wiring for compressors and associated rotating equipment.Designing and/or specifying control panels and motor switchgear including electromechanical panels, microprocessor panels, PLC and DCS based system panels.Performing engineering calculations such as power consumption, control transformer sizing, instrument loop impedances, etc.Sketching ladder logic, logical flow and/or instrumentation diagrams and rudimentary panel layouts using PC based drawing programs. (AutoCAD preferred).Providing guidelines for the design of control panels, junction boxes and conduit/wiring systems in accordance with the National Electric Code (NEC).Writing inquiries, specifications, and requisitions for purchased equipment.Checking drawings and writing installation/operation and maintenance instructions.Reviewing orders and specifications to identify technical cost options, comments, clarifications, and exceptions.Interfacing with customers daily, both internal and externalAttending meetings, both at our facility as well as customer facility. Traveling on a limited basis.Conferring with project engineering personnel as well as manufacturing personnel.Work on various projects at different stages at the same time.What We Look For:Bachelor’s degree in electrical engineering from a four-year college or university or related experience and/or training in packaged industrial electrical control and wiring systems.1-3 years of experience as an engineerKnowledge of Microsoft office including Word and Excel.PreferredExperience with AutoCADConstruction experienceWhat We Offer:Competitive salaryPaid vacation/holidays/sick timeComprehensive benefits package including 401K, medical, dental, and vision care -Available day one!On the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policy#JCIEarlyCareers#projectengineer
Full Time
5/4/2025
Delta, PA 17314
(26.7 miles)
WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.***This Engineering role can be filled at the Entry, Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***Expected salary range:Entry Level - $82,500Mid-Level - $88,000 - $108,000Sr Level - $115,000- $141,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K.MINIMUM QUALIFICATIONS for Entry Level E01 Engineer &ndash New GraduateB.S in EngineeringMINIMUM QUALIFICATIONS for Mid-level E02 EngineerB.S. in Engineering, a minimum 2 years Nuclear experience or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Engineering, a minimum 5 years Nuclear experience or related engineering experience Role: I&C Design EngineerJob Description:Prepare/Review Internal calculationsPrepare/Review Engineering Changes (EC&rsquos) for Distributed Control Systems (DCS), Human-Machine Interfaces (HMI), and Programmable Logic Controllers (PLC) applications, single loop controllers and field sensors.Prepare component and control system hardware design, software verification, validation, network design, and configuration.Review software hazards analysis, Failure Modes and Effects Analysis (FMEA), and human factors engineeringDevelop the engineering cost estimate, schedule, and project specification.Participate in the bid specification preparation and vendor bid selection process.When engineering services are contracted, perform owners acceptance reviews, maintain responsibility for the work and manage schedule and cost.Plant Outage and Online Support for Modifications as requiredPerform technical and engineering problem-solving tasks to support nuclear plant operations. PREFERRED QUALIFICATIONSProfessional Engineer RegistrationAdvanced technical degree or related coursework
Full Time
4/20/2025
New Freedom, PA 17349
(14.5 miles)
***Consideration given to applicants residing within a commutable distance from New Freedom, PA or willing to relocate***Build your best future with the Johnson Controls team!What We Offer:Competitive salaryPaid vacation/holidays/sick time -15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care -Available day oneExtensive product and on the job/cross training opportunitiesWith outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do:The Sr Engineer is responsible to contribute to the product team through product design, testing, data analysis, and project management. The Sr Engineer will also support the manufacturing and sustaining of the product including initiating and executing design changes. All these tasks also require strong communication skills and the ability to clearly present information to engineering teammates, engineering managers, and product management. This role will be based in the Johnson Controls Advanced Development Engineering Center (JADEC), take a lookJohnson Controls Advanced Development and Engineering Center (JADEC)How You Will Do It:Maintains understanding of theories, concepts, technical principles and processes related to fluid, thermal, and other mechanical aspects of water-cooled chillersContributes to the on-time completion of programs and regularly reports on the status of projectsHas proficiency in mechanical design and be able to conceptualize and implement design ideas into the productApplies mechanical codes such as UL, CE, PED and ASMEWork closely with the design and manufacturing teams in generating layout concepts and system configurations that consider the best balance of cost, performance, and reliability.Coordinate and help execute test programs to validate performance and reliability of mechanical systems and componentsAnalyzes, designs, modifies and/or troubleshoots mechanical sub-components and sub-systems based on test dataGenerate and review technical documentation for use within the product teamOccasional domestic and international travel (less than 10%)Teamwork and the ability to work with many teams is critical in our global product development environment. Each of these virtues must be consistently displayed with a focus on continual improvement of our team cultureWhat We Look For:RequiredBS in Engineering or related scienceMinimum 4 years of experience in HVACR or related fieldProficient with organizing and processing large amounts of dataExperience with product development and sustaining of configurable systemsPreferredStrong understanding of fluid and thermal principlesExperience with fluid dynamics and heat transferPackaged systems#ProductEngineer#Hiring
Full Time
4/22/2025
Delta, PA 17314
(26.7 miles)
WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.Expected salary range of $152,100 to $169,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). PRIMARY PURPOSE OF POSITION Provide management of the engineering function of accountability. PRIMARY DUTIES AND ACCOUNTABILITIESProvide management of the engineering function with respect to station needs and regulatory requirements.Manage the performance and development of assigned engineering personnel relative to site and corporate objectives and provide focus on the attainment of high-quality engineering results.Directly and through subordinates, fulfill engineering and technical leadership accountability regarding short-term and long-term programs that impact site operations.Participate as in Business Planning, Budget, and Business Performance review regarding assigned staff.Participate as senior resource to NGG-wide programs and initiatives regarding standardized and enhanced engineering systems and processes.MINIMUM QUALIFICATIONSBS in Engineering or License Professional Engineer Minimum of 5 years related experience with commercial or military nuclear power plant or other utility experienceDemonstrated technical leadership (e.g. Duty Team Lead, Inspection Lead)Teamwork and accountable to achieving positive resultsPositive Leadership Assessment PREFERRED QUALIFICATIONSProfessional Engineering RegistrationDesign Engineering experienceAdvanced technical degree, MBA
Full Time
4/23/2025
Waynesboro, PA 17268
(44.9 miles)
Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive PayPaid vacation, holidays, and sick time -Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.JCI Employee discount programs (The Loop by Perk Spot).Check us out: A Day in the Life of the Building of the Future - https://youtu.be/pdZMNrDJviY]Check us Out: A Day in a Life at Johnson ControlsPlant Operations https://youtu.be/cjZpE51xySYWhat you will doSuccessful applicants will have a good understanding of standard technical principles, theories, concepts, techniques, and processes. Has a working knowledge of AutoCAD and Drafting standards and applies them towards the execution of Sales Orders or ECNs. Capable of creating and modifying diagrams, piece part drawings and simple assemblies. Has a basic understanding of electrical symbology, geometric dimensioning, and tolerance principles.How you will do itRead and understand technical drawings of components such as instruments, control panels, starters, etc.Work with Engineers, other design personnel and shop personnel to insure proper design.Develop wiring diagrams using AutoCAD Electrical 2024 (Bentley, Plant 3D or Inventor experience a plus).Develop 2D plan, elevation and section drawings of control panels using AutoCAD Electrical. Includes mounting components, terminal blocks, associative dimensioning and avoiding interference between equipment.Develop and implement designs for conduit and/or cable tray installations.Develop bills of material using MS Access database and web-based configuration tools.Check other drawings (peer checking).Work with Operations group personnel to answer questions, make corrections, etc.The ability to multitask and an attention to detail are a must.RequiredRequires an AS degree or equivalent from college or technical school or two (2) years related experience in electrical machinery design. Requires CAD education or equivalent experience. Personal computer working capabilities include email, browser, MS Word, MS Excel, etc.About Us: Johnson Controls is an equal employment opportunity and affirmative action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit www.johnsoncontrols.com/tomorrowneedsyou
Full Time
4/27/2025
Waynesboro, PA 17268
(44.9 miles)
What you will doAs a Staff Mechanical Engineer, you will be a member of our custom product design team. In this role, you will have an influence on the conceptual development, mathematical analysis, detailed design, and overall performance of sophisticated refrigeration products and systems. As a recognized technical subject matter expert this role will also provide support to the salesforce, factory production, laboratory, service, applications, and marketing teams located globally.How you will do itUse standard and sophisticated engineering principles, concepts, and processes.Research equipment operation, materials, industrial processes, and manufacturing equipment.Investigate and analyze product design requirements and recommends optimum solutions.Proficient in mechanical design and be able to conceptualize and implement design ideas into the product.Utilize mechanical engineering theory and methodologies such as heat transfer, fluid dynamics, thermodynamics, and failure analysis.Develop mathematical calculations and formulas using multiple variables, and analyze results.Establish test criteria, participate in laboratory testing, and analyze test data to identify chiller performance characteristics.Work closely with the design and drafting group in generating product layout concepts and system configurations.Responsible for the on-time completion of projects.Generate user documentation.Continuously increase expertise on all aspects of product design, theory, construction, operation, and applications.Learns and applies regulatory codes such as UL, ASME, and API.Strive for continuous improvement and teamwork in a global product development and process environment.Help train other engineers and designers on design concepts and processes.What we look for:A Bachelor’s degree in Mechanical Engineering (ABET accredited)Minimum 8years of applicable experience with at least 5 years experience in the refrigeration industryExperience with CompressorsPackaging experience is a plusExperience with AutoCADProficiency in PowerPoint for presentations and Microsoft suite of Applications (Word, Excel, Access)Experience with AutoCADInternet software and E-mail is required. Knowledge in SAP is helpful but not required
Full Time
5/7/2025
New Freedom, PA 17349
(14.5 miles)
Build your best future with the Johnson Controls team!Who We Are:YORK® Chiller Solutions from Johnson Controls, help customers respond to building efficiency needs by providing the widest variety water and air-cooled industrial and commercial chillers on the market. From reducing a facility’s carbon footprint, to delivering a healthier indoor environment and cutting energy costs, we build smaller, more energy efficient chillers tailored to fit almost any comfort or process cooling application – even heating. Candidates must be commuting distance to New Freedom, PA, or willing to relocate.Take a look at where you'll work! Johnson Controls Advanced Development and Engineering Center (JADEC)What You Will Do:This position is within the water-cooled chiller contract engineering team. We are seeking a hands-on engineer to work on contract chiller sales orders, and interface with our design team as needed. This role will focus on providing wiring diagrams, panel diagrams, instrumentation, and possibly system wiring components.How You Will Do It:As Electrical Engineer within our Chillers product development team, you will be responsible for electrical analysis, detailed design, and control, as well as overall electrical performance of sophisticated water-cooled chillers components and systems, including providing support to manufacturing and design and drafters. In this role you will work on providing wiring diagrams, panel diagrams, instrumentation (BOMs), ECNs, and possibly system wirings in time. This position is not eligible for Visa sponsorship.What We Look For:RequiredBS in Electrical Engineering, or EMET and or related science.Minimum 3 years’ experience (BS degree) in a related field and directly handling Hazardous Environments jobs.Ability to read, understand, and create electrical and control schematicsAbility to troubleshoot and debug electrical and control circuitsUnderstanding of process and machine control fundamentalsAbility to manage details of technical requirements including task assignments, tracking and communicationsAbility to create electrical schematics and panel design layoutsAbility to manage workload effectively (planning, organization, communication of tasks)Strong teamwork skills (will be part of multidisciplinary teams working major developments)Knowledgeable around different Comms Protocols (RS485, RS232, Ethernet)Experience with CAD tools and 3D modeling (AutoCAD and CERO or SolidWorks)Experience creating Harness & Power Distribution DrawingsExperience with Hazardous Environments and the requirements needed for Electrical designs and safety requirements. (Class 1, DIV 1; and Class 1, DIV 2)Preferred:Refrigeration system knowledge (chillers, heat pumps, etc.)Mechanical aptitude (connection to the "system" they're controlling)Experience with creating BOMsGood trainer in CAD tools (inexperienced employee(s) could benefit from partnering with this candidate)ERP Experience (SAP preferred)P&ID ExperienceCreo Cabling Experience#ElectricalEngineer#LI#Hiring
Full Time
4/27/2025
New Freedom, PA 17349
(14.5 miles)
***Consideration given to applicants residing within a commutable distance to New Freedom, PA or willing to relocate***What You Will Do:Our Test Engineer will oversee product testing throughout the test life cycle. This includes designing, planning, execution, and preliminary analysis of results. The Test Engineer must possess and/or have the ability to develop a working knowledge of HVAC/R equipment and its application and has experience with component or system testing, test procedure development, mechanical fluid or airflow system design, troubleshooting, and operation. our Test Engineers are required to execute the testing for individual test subjects in order to successfully and efficiently complete testing for the product area customer. In this role you will conceive, develop, and evaluate plans for solving complex testing challenges. The ideal candidate will have technical aptitude in HVAC. This position is not eligible for Visa sponsorship.How You Will Do It:Provide technical communications for Test Engineering to product customer(s).Plan and execute tests of chillers and components. This may include:Participate in the development of and/or receive and review test specifications from customer group; seek out and acquire needs from other areas/disciplines who may wish to benefit from testing a particular subject.Use input from the customer group(s) to facilitate test plans and identify resource (human, physical) requirements.Meet with product engineering, product management, product technical support, or equivalent groups to agree upon and issue test plans.Work within the Test Engineering team to schedule tests and required resources with regards to capacity limitation.Provide oversight and input to Test Technicians for set up of data acquisition software configurations.Work with labor, test support, and engineering resources to actively manage the test from set up to completion. This includes daily monitoring and planning, communication, direct data acquisition, review of data acquired, provide engineering analysis of data acquired, problem resolution, and other activities necessary in order to efficiently perform and complete testing in a timely fashion.Maintain a proficiency in understanding chiller test data to guide the customer engineering teams as necessary to acceptance or assist in explanation of data results.Drive the evaluation and creation of standard procedures, test standards, and processes using applicable engineering tools. This includes, but is not limited to LEAN, 6-Sigma, Value Stream Mapping, Design of Experiments (DOE), 5S, Gemba, Kaizen (continuous improvement), KPI analysis and development, PDCA (Plan, Do, Check, Act), and Root Cause Analysis.Use experience to develop new procedures, processes, and resources as necessary to provide more efficient, accurate, and advanced testing services for product customers.What We Look For:BS required in an engineering or engineering adjacent discipline.Preferred combination education and experience, three (3) years direct work experience in the following: HVAC/R equipment development, servicing or testing, good understanding of HVAC/R systems, concepts, and diagnostics.Ability to perform test data acquisition and data analysis, test troubleshooting and diagnostics, technical reporting, and related communication at various levels is required.Experienced in environments ranging from laboratory, manufacturing/testing facilities, and field sites.Able to work in fast-paced, schedule driven work environment and possess the agility/adaptability to quickly move from one task to another when required. Must be self-motivated.Strong communication skills; willing to confront issues in an open, efficient, and tactful manner.Strong group communication and presentation skills.Demonstrated use of engineering tools and concepts within a manufacturing or testing facility.Good computer and data analysis/management skills with proficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint) as well as internet software and e-mail.Preferred:Familiarity in one or more technical and operational disciplines within HVAC platform development.Background in engineering or development testing.#TestEngineer#Hiring
Full Time
5/7/2025
New Freedom, PA 17349
(14.5 miles)
***Consideration given to applicants residing within a commutable distance from New Freedom, PA ***Build your best future with the Johnson Controls team!Who We Are:Johnson Controls is powered by your talent. We are the power behind the customer mission. Together we are building a world that’s safe, comfortable and sustainable. Our diverse global team of 100,000 experts in more than 150 countries creates innovative, integrated solutions to make cities more connected, buildings more intelligent and environments more comfortable and secure. This position is not eligible for Visa sponsorship.What We Offer:Competitive salary Paid vacation/holidays/sick time - 15 days of vacation first year!Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one!Extensive product and on the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do: Hardware design engineers design, test and sustain electronic Printed Circuit Board (PCBs) assemblies and components. They conduct schematic design and layout using CAD software to meet specific documented hardware requirements. Get excited! Take a look at where you will work...Johnson Controls Advanced Development and Engineering Center (JADEC)How You Will Do It:Develop and maintain PCBA for chiller applications including Variable Speed Drive (VSD) boards and chiller control boards.Design of analog & digital interface circuits, power supply circuits with MCU & FPGA onboard.Participate circuit analysis and incorporate appropriate reliability principles into PCBA design.Design and maintain PCBAs including both schematic and layout using design tools such as Altium.What You Will Need:RequiredBSEE or BSCE, or related field; and 2 years of experience.Ability to work in a fast-paced, schedule driven, team-oriented environment.Good team player, strong verbal and written communication skills.PreferredFamiliarity with LabView software.Familiarity with test fixture design is desired.Familiarity with PCBA circuit design.#EarlyCareers#ElectricalEngineer
This website uses cookies for analytics and to function properly. By using our site, you agree to these terms.