We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Our Taneytown, MD Pump Manufacturing facility is over 150,000 square feet and provides capability for engineering, design, customer service, machining, assembly, and testing for a diverse product portfolio, which serves all markets (power, oil & gas, water resources, general industry, and chemical). The facility has expanded four times since opening in 1971 to accommodate revenue growth and product line developments. The entire project lifecycle is experienced all under the same roof. Role Summary: Flowserve is looking for a Machinist at our manufacturing facility in Taneytown, MD. The candidate should be proficient in the set-up and operation of manual lathes, with exposure to CNC. The ideal candidate will have extensive knowledge of the general manufacturing environment to include, able to work safely, able to machine tolerances +/- .001, precision tool grinding, the use of overhead jib cranes, ergonomics, and inspection equipment. This machinist position requires self-inspection of parts, able to use trigonometry to find dimensions, understanding of geometric tolerancing, and being able to work in a safe and efficient manner. 2nd shift: Mon - Thur 3:30 pm - 2:00 am - 5% Differential Responsibilities: Run castings on CNC machines.Maintain clean and well-organized work area at all times while maintaining all tooling and machinery for efficient and safe operation.Accurately machine to within a +/- .001 tolerance and familiar with prints with geometric tolerances.Understand and operate machines, tooling, and measuring equipment properly and safely.Comfortable with all types of precision measuring equipment and working in English and Metric systems.Experienced with jib and overhead cranes lifting large castings.Adhere to all Safety Procedures & Policy. Complete all Pure Safety and other safety training as required. Requirements: CNC Machinist/Programmer with EdgeCAM or similar CAM software programming knowledge & experienceExperience in using and interpreting precision measuring instruments, such as micrometers, dial indicators, and depth gaugesDemonstrated ability to read and interpret blueprints, geometric tolerances, and finishes during the application of machining.Ability to work in a team oriented and CIP environmentAbility to read and interpret instructions and drawingsAbility to follow complex verbal and written instructionsAble to stand for long periods, repetitive arm motions, frequent lifting with occasional lifting up to 50 lbs.Ability to work overtime as requiredHigh School Diploma/GED or relevant years of experience in lieu of education Preferred skills: Machinist certification, training or degree related to machining is a plusExperience in high mix, low volume manufacturing environment The pay range for this position is $21.66 - 32.55 USD Hourly Benefits Starting from Day 1: Medical, Dental & Vision Insurance (including FSA and HSA options)Life Insurance + Supplemental Life, Child, Spousal, and AD&D InsuranceShort and Long Term DisabilityRetirement Planning, 401(k) plan, & Financial Wellness ResourcesEducational Assistance ProgramTime off Policies (including sick leave, parental leave, and paid vacation)Eligibility requirements apply to some benefits and may depend on job classification and length of employment. Req ID : R-14553 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Build your best future with theJohnson ControlsteamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of theJohnson Controlsfamily and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaid vacation/holidays/sick time-10 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care –Available day oneEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out!:https://youtu.be/pdZMNrDJviYWhat you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation.Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of serviceHow you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software.Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads.Manages assigned work to meet professional and efficient execution of time and customer satisfaction.Reportsproblems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally.Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals.Install and modify software and graphics.Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work.Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to allcontrol'stechnicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors.Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required.Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment.Compilesjob documentation, such as certificate of completion, customer training form, training certificates and punch lists.Conducts extensiveself-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company.Other duties related to the installing,commissioningand servicing of building controls and facilities management systems and energy management systems, as assigned.Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations,and billof material, network layouts and electrical schematics as required.Assists in developing and testing software programs necessary to operate the system per the project requirements' intent.Compiles and/or completes project as built and close-out documentation.Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation.Selects, orders, and tracks the delivery of materials for assigned.Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation.May provide field change information to the project team for the creation of as-built drawings and software.Keeps management and JCI contractor or customer informed of job progress and issues.Assists in performing site-specific training for owner / operator on the total building control system.Participates in release meeting with project field team.Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.What we look forRequiredBe a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business.Minimum of Six (6) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems.Vocational School program graduate or associate's degree in a technical field, or two years’ experience in servicing electronic and or mechanical systems.Demonstrated ability to install and/or service electronic control systems and HVAC equipment.Effective communication skills to represent Johnson Controls on customer sites.Possesses the ability to explain technical information to technical and non-technical people.Demonstrate effective writing skills as well as understanding of programs and software applications.Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems.

Compensation Details:$15.40- $19.20 - $23.00Why should you join our team We live our values - W.E.L.I.G.H.T (Winning, Excellence, Love, Integrity, Gratitude, Humility, and Teamwork). Gratitude. Humility. Love. You don’t often see values like these in most corporate statements, but Ace is different. These things are important to us. They represent our commitment to the company, our employees, to Ace retailers and to the Ace brand.In addition to providing our employees a great culture, Ace also offers competitive benefits* that address life’s necessities and perks, many of which expand and improve year after year, including:Weekly PayPaid Time Off Programs (incl. vacation, paid sick time, holiday pay). Newly hired full-time employees will receive a one-time pro-rated allocation of up to 24 hours of vacation in their first calendar year depending on the month of hire. Paid sick time in accordance with applicable state law. You will receive up to 9 holidays per year, depending on the month of hire.Comprehensive health coverage (medical, dental, vision and disability – up to 26 weeks short-term disability and long-term disability) & life insurance benefits for you and your dependents.Generous 401(k) retirement savings plan with a fully vested matching contribution the first year in addition to quarterly contributions and annual discretionary contribution (once eligibility requirements have been met). Over the past 5 years, company contributions (matching, quarterly & discretionary) for fully eligible employees have averaged 9.6% of total eligible compensationDock to Driver Program: Ace will pay for your CDL License and Training to provide a career path transition to a Driver positionLong-term Career Opportunities:Many of our leaders started with Ace looking for a job, just like you, but found long-term career opportunities at our 15 Distribution Centers across the country and our Corporate Headquarters.Our company is growing, and we would love to have you grow with us!Tuition Reimbursement ProgramEmployee Recognition ProgramMerchandise Discounts on Top Brands like Weber, Traeger, Yeti, Craftsman, DeWalt and thousands more!Employee Assistance Program (EAP) – access to free visits to therapists and lawyers, guidance on financial matters, elder and childcare, and assistance with tickets to entertainment events.Adoption cost reimbursementIdentity theft protection* Benefits are provided in compliance with applicable plans and policies.Job Description:Schedule:Sunday through Thursday 6:00am to 2:30pmWhat You’ll DoKnowledge of machines and tools, including their designs, uses, repair, and maintenance.Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices.Perform routine preventive maintenance or repair to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.Inspect, operate, or test machinery, equipment, or systems to diagnose machine malfunctions.Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary.Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment.Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists.Record type and cost of maintenance or repair work.Ace Hardware is committed to promoting and maintaining a safe, healthy and injury-free environment for all team members. This is our number one priority, and we will support programs and initiatives that focus on this commitment. It is critical that all team members take responsibility for their safety as well as the safety of others to ensure that Ace Hardware is a world class safety organization.What you need to succeed:Be a safety champion by promoting a safe and productive workplace through your own actions, including the proper use of PPE, safe operation of powered equipment and safe lifting techniques as determined by the role.Be an active participant in contributing to a successful safety culture in the facility.High school diploma or GED equivalent preferred.Must be at least 18 years of age.Ability and willingness to work non-traditional shifts and hours.Experience with general maintenance/ electrical duties preferred.Have general knowledge of conveyors systems, and ability to trouble shoot.Ability to CMMS and good computer skills for utilizing PM Software system.Maintenance experience within a manufacturing/ distribution environment.Want to be notified when new jobs are posted Follow the link below to create an account and set up custom job alerts:Create Job AlertWe want to hear from you!When most people think of career opportunities with Ace Hardware, they often think of the helpful cashiers and sales associates at their local store. However, have you also considered the people behind the scenes who select, promote, ship and process the invoices for more than 75,000 products Maybe you haven't, but we'd like you to. Because together we help our customers take care of their homes. Come find out why a career with the Ace Hardware Corporation is one of America's best kept secrets.Equal Opportunity EmployerAce Hardware Corporation is committed to a policy of promoting equal employment opportunities. The company recognizes the importance of diversity and leveraging the skills and talents of all people to the mutual advantage of each individual and the organization. The company is committed to the prevention of employment discrimination related to race, religion, color, sex (including sexual harassment), gender identity, national origin, age, marital status, disability and military or veteran status, sexual orientation or any other action covered by federal or applicable state/local laws.DisclaimerThe pay range for this position starts as listed in the job posting, but could be higher based on education and experience. Please note, compensation decisions are dependent on the facts and circumstances of each opening. We take into consideration the minimum requirements outlined in the job description, such as an individual’s education, training and experience, the position’s work location, required travel (if any), and external market conditions when determining the final salary for potential new hires. Be aware that salary estimates published via alternate online job boards may not be a true representation of the actual pay range offered for this position. Please refer to the Ace position description for the accurate starting pay range information and feel free to discuss this with a Talent Acquisition professional if you are chosen to move forward with an interview. This written “Position Description” is not intended to cover all aspects of the position listed. It is meant to cover the basic/general essential job functions of a particular position. Ace Hardware Corporation reserves the right to change job duties, including essential job functions, according to business necessity.It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers large and small package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People • Customers • Trust Principle Accountabilities:Work as part of a team in support of a manufacturing operation with a goal of increasing productivity, decreasing downtime and waste. Assume active role in overall plant facilities-related work. Position requires assisting all jobs on the plant floor.Follow all company safety rules and lockout tag-out procedures.Maintain shop and equipment per 5S standards.May be required to lift up to 30 lbs. for a period of up to 12 hours.Set-up and operate machine to produce product according to customer specifications.Troubleshoot, perform minor repair, and preventative maintenance procedures on machine.Trains Helper, as required.Perform quality checks as required and take appropriate action when needed.Perform other job-related duties as assigned or delegated.Comfortable with computers and touch screens.Cross-train on other machines and jobs.Complete necessary reports in an accurate and timely manner, including but not limited to: Production Data, Machine Operational Status, Safety Data, and Quality Data.Input maintenance work orders into BPMS software. Be proactive in the maintenance of equipment.Switch duties with Assistant Operator or Helper if necessary.Comply with the facility’s food packaging safety program processes and procedures.Complete annual food packaging safety training.Report any discovered food packaging safety risks/concerns to the food packaging safety management representative or direct supervisor.Comply with all company policies and procedures, including but not limited to: Safety, GMP, FSSC, ISO, and maintaining good housekeeping.Adhere to production schedule and make recommendations for optimizing the schedule to meet cost, quality, and service goals. Report any unusual scheduling issues to supervisor. Perform other duties as assigned. Basic Qualifications:High School Diploma or GED. Be passionate about maintaining a safe work environment. Strong mechanical aptitude and possess problem-solving skills. Able to pass pre-employment background check and drug test.Must be able to sit, stoop, and bend.Ability to work any shift, including overtime and weekends as needed.Must be authorized to work in the U.S.Ability to work in manufacturing environment, with varying temperatures based on season, around machinery, and heavy forklift traffic.Preferred Qualifications:Experience in a packaging or other manufacturing environment. Knowledge, Skills, and Abilities:Must be willing to work closely on a day-to-day basis with other production personnel. Excellent communication skills. Work with a sense of urgency to reduce downtime of machines. Ability to work in a fast-paced environment and handle multiple requests simultaneously. All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories.

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needSymbotic is seeking an Automation MaintenanceTechnician at all levels. As a Maintenance Technician you will be responsible forrepairing and calibrating our automated and robotic systems. These systems are Symbotic’sautomated adapters, vertical lifts, and Symbotic’s fleet of automated robotic vehicles.You will be responsible for system upkeep and operations of automated adapters used to interface with the Symbotic structure.As the Maintenance Technician you will become the system expert including all mechanical, PLC, electrical or electronic subsystems.What we doOur Automation Maintenance Technician team is part of the Customer Operations organization which is responsible for leading the day-to-day operations of Symbotic’s robotic material handling system. The Customer Operations organization drives operational excellence by engaging and partnering with our onsite customers to drive best-in-class quality, safety and system performance.What you’ll doPerform inspections on systems associated with Automated Storage and Retrieval System of automated robotic vehicles and Automated Adapters/ Lifts.Lead continuous operation by adjusting, calibrating, repairing, replacing or modifying system components.Process and monitor the flow of the automated storage and retrieval system, through means of the adapters, including manual inbound, automatic inbound, automatic outbound, to achieve maximum throughput and cases per hour.Troubleshoot automated robotic vehicle anomalies and stoppages using schematic and wiring diagrams as well as advanced test equipment.Perform periodic system inspections within expected durations on all equipment and thoroughly document all actions and repairs to include parts used and labor. Ensure quality maintenance and complete documentation via the Computerized Maintenance Management System (CMMS).Effective communication of production impacting problems and suggested actions, including approximate time required for corrective and emergency maintenance to required team members.Must be able to work in a dynamic environment and change course based on immediate business needs.Cleanup of equipment and removal of replaced parts from work areas after repairs are completed.Responsible for automated robotic vehicle recovery in the Symbotic Matrix select system to include working in restrictive environments.Responsible for minor utility work such as machining holes, brackets; cutting steel; aligning sensors; attaching Unistrut; etc.).Responsible for troubleshooting, calibration, set up, and tool changes on Robotic arms.Responsible for continuous cleaning and adhering to 5S policies.Perform Cell Operator functions as needed.Other duties as assigned by leadership.What you’ll needAssociate degree and/or certification in electronics, automotive, automation, manufacturing or equivalent work experience preferred.A minimum of 3 years of experience with mechanical automation systems or educational/training equivalentManage and lead advanced troubleshooting skills and ability to follow electro-mechanical diagrams.Must be able to operate and run Automated systemsExperience with PLC (Programmable Logic Controller) knowledge and troubleshooting.Advanced troubleshooting skills and ability to follow electro-mechanical diagrams.Proficient in performing all Inspection functions.Ability to work independently of supervisor following procedures and manuals.Our EnvironmentThere will be steep stairs to climb into the structure.You will regularly be near railings that are high off the ground.Subject to environmental conditions, protection from weather conditions but not necessarily temperature changes. Must be capable of working in temperatures ranging from 105° to 32° Fahrenheit.If the site location is in construction, you will be required to wear proper PPE (hard hat, safety vest, steel toes, eyeglasses, ear protection, fall protection (e.g., safety harness).Frequent ability to safely and efficiently lift items weighing up to 50lbs and move items weighing up to 80lbs.Stand/walk for up to 10-12 hours and is frequentlyrequired to walk and reach with hands and arms.The employee is routinely required to work at heights of up to 45 feet and within restrictive areas of 24 inches. to stand; climb or balance and stoop, kneel, crouch, or crawl.Must be capable of occasional and/or continuous feeling, seeing, hearing, bending, twisting, stooping, pushing, pulling, balancing, gripping, climbing, crawling, sitting, handling objects, and repetitive movement using both hands and feet. Must comply with all safety requirements and protocols, including without limitation Lock out tag out safety protocols and fall protection safety protocols.#LI-DM1#LI-OnsiteAbout SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:JOB DESCRIPTION- Trailer Technician Candidate will possess personal knowledge and skills to perform preventative maintenance on UPS Transportation Trailers and Converter Dollies.? Will properly diagnose and perform necessary repairs to non-power equipment, including air brake systems and electrical systems.? Candidate must be willing to work 2nd or 3rd shift.? Schedules include Monday through Friday and Sunday through Thursday and Tuesday through Saturday. An attractive pay and benefits package is offered. Uniforms are provided. Candidate must possess all personal tools required to perform the job and will be required to appropriate necessary hand tools as required by job assignment. Ideal candidate will possess the following:Current documented trailer mechanic experience Experience using diagnostic equipment, scan tools and personal computer Possess a full complement of personal hand tools Job ResponsibilitiesMeet D.O.T requirements Bend, stoop, squat, kneel, crouch, crawl, climb ladders and stairs, stand, walk, and turn/pivot frequently throughout the duration of the workday Full time: 8-10 hours per day, 4-5 days per 7-day week Report to work on a regular and timely basis and complete the scheduled workday on a consistent basis Ability to work varying shifts, additional hours and/or overtime depending on service needs Sitting required infrequently throughout the duration of the workday Lift, lower, push, pull, leverage and manipulate equipment and/or packages weighing up to 70 pounds Assist in moving packages or equipment up to 150 pounds Simple hand grasping, power hand grasping, fine hand manipulation, reaching from foot level to above shoulder level as necessary to complete assigned tasks Operate standard/manual transmission Operate power, pneumatic tools Required to wear personal protective equipment Must meet all requirements to be Power Industrial Truck Operations (PITO) certified Work in an environment with: variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather Work cooperatively in a diverse work environment Have a sufficient ability to communicate, through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions OTHER CRITERIAEmployer will not sponsor visas for position.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position is $37.36 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

*Wednesday-Saturday 8pm-6am *About the RoleAs a Maintenance Technician, you will promote workplace efficiency and profitability by maintaining, inspecting and repairing facilities, equipment and machinery. What You’ll DoDaily inspection and repair of all conveyor systems and equipmentRoutine inspection, preventative maintenance and maintenance of air compressors, generators, compactors, bailers, conveyors and power and material handling equipmentPerform inspection and repair of fire protection equipmentParts administrationPerform minor electrical and plumbing repairs, painting and office furniture movesPerform routine maintenance on heating and air conditioning unitsMaintain lighting throughout the facilitySort, stack and load pallets, cardboard, aluminum, steel and light bulbs for recyclingAssist outside contractors in performing various dutiesPromptly answer calls for jams, malfunctions or other maintenance-related issuesWhat Skills You HaveRequiredBasic knowledge of mechanical, electrical, plumbing and HVAC equipmentCompliance with all MSDS standards and lock-out/tag proceduresAbility to climb ladders and run all power equipmentAbility to work with minimal supervisionMust provide own basic set of toolsAbility to use cleaning and disinfecting solutions, oil and equipment according to MSDS procedurePay Range: $24.20 - $38.70Kohl’s offers a variety of benefits to associates depending on full-time/part-time status and work hours, including: WORK LIFE BALANCE (PTO, Vacation Buy Program, Parental Leave), HEALTH & WELLNESS (Medical, Dental, Vision and other short and long term disability programs, Emergency health and wellness programs such as Accident Protection Plans, Critical Illness Plans and more), SAVINGS & RETIREMENT BENEFITS (401k, Flexible Spending Accounts and associate discount programs with Kohl’s partners), INSURANCE PROGRAMS (Life Insurance for you, your family or your pet, as well as other protection programs), and LIFE EVENTS (Legal and adoption assistance benefits).

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: This position welds parts and components for equipment, products, and installations by means of MIG, MAG, TIG, electrode welds or any other welding application. As part of a customer-focused team, you will be working with tight deadlines, challenging mechanical problems, and discussing the work with the manager before, during, and after work completion. Shift Hours: Mon-Thur / 3:30pm - 2am (Training on 1st shift will be required for up to 6 months) Responsibilities: Select the appropriate welding method, such as TIG, MIG, or stick.Proper Identification of materials and component preparation.Welding repairs on raw and finished parts.Complete all welding work assigned according to operation instruction.Verify the quality of finished work, demonstrating an in-depth understanding of specifications and workmanshipMeet production goals relating to efficiency, schedules, and scrap.Record accurate, timely data on computer-based systems or in manual logs.Maintain a safe workplace by wearing relevant protective equipment according to safety protection requirements, following procedures and rules, and completing training.Clean and maintain equipment and tools and keep an organized workspace.Able to define, evaluate, and discuss quality workmanship related to welding.Must show a customer-service mindset for on-time delivery and quality work.Demonstrated track record of reliable, dependable attendance; able to work overtime.Other duties as assigned. Requirements: Welding experience in a manufacturing environmentAbility to obtain ASME welder certifications within 6 months of employment (Horizontal stick/TIG and flat MIG)Standing for long times required, frequent lifting with occasional lifting up to 50 pounds. The pay range for this position is $19.34 - 28.98 USD Hourly Benefits Starting from Day 1: Medical, Dental & Vision Insurance (including FSA and HSA options)Life Insurance + Supplemental Life, Child, Spousal, and AD&D InsuranceShort and Long Term DisabilityRetirement Planning, 401(k) plan, & Financial Wellness ResourcesEducational Assistance ProgramTime off Policies (including sick leave, parental leave, and paid vacation)Eligibility requirements apply to some benefits and may depend on job classification and length of employment. Req ID : R-13415 Job Family Group : Operations Job Family : OP Welding EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision