We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Overview: The Sr. Project Manager can run a standalone multi-craft, joint venture, or EPC project up to $200+ million dollars. The Sr. Project Manager is responsible for overseeing project Safety, Quality, and all Project Controls required to lead the project. Dependent upon the project structure the PM is responsible for directing engineering, technology providers as well as JV partners. The PM is accountable for all aspects of the project including but not limited to safety, quality, labor, material, scope, client interaction, and overall execution of all disciplines.To successfully manage their work, they must have a thorough understanding of the industry best practices and codes for all disciplines.The role requires interfacing with all areas affected by the project including the client(s), engineering/design, subcontractors, distributors, vendors, and the ongoing strategic communication with project management regarding the status of the project.Location & Travel Details: You can be based in any city or state in the U.S.. This is a traveling, project based position, up to 90% of the time. You have the potential to be placed on a project site located in any state throughout the US. You’ll spend 8-18 months on average per project. We offer designated per diem in addition to an excellent base salary to support and help you cover living expenses. This position is eligible for mobilization support (may include mileage reimbursement), and includes one longer weekend every four weeks for additional time at home. A company vehicle and fuel card OR vehicle allowance will be provided.COMPANY OVERVIEW: MasTec Industrial, alongside its sister companies Casey Industrial and Phoenix Industrial, has been in operation since 1947. We serve a diverse clientele, including utilities, independent power producers, developers, and municipal utilities.Specializing in projects using natural gas, oil, biomass, and other combustible fuels, our team boasts over 30 years of expertise in the power industry. We provide EPC (Engineering, Procurement, and Construction) services and assist in project development. Our experience spans various systems for utility and industrial facilities, including simple and combined cycle plants, reciprocating engines, and waste-to-energy projects. MasTec Industrial delivers value throughout all project phases, from conceptual design to operations and maintenance.At MasTec Industrial, we are dedicated to delivering the highest quality, safety, and value in every project. We focus on attracting, developing, and retaining top talent within our organization. Our goal is to foster a respectful work environment where all employees feel valued, included, and empowered to become innovative leaders in the industry.The MasTec Industrial market sector is part of the MasTec Clean Energy & Infrastructure business segment. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables and infrastructure sectors. In addition to our industrial market sector; In infrastructure, we specialize in general heavy civil construction, underground utilities, structures, electrical work, material production, roadways, bridges, specialty pavement overlays, environmental projects and commercial buildings. Our renewables sector focuses on solar, wind and battery storage. Sustainability and safety are foundational to our culture and influence everything we do.MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Responsibilities: ESSENTIAL JOB FUNCTIONS:Oversee and manage entire site management team (Construction Manager, Project Engineer, Quality Manager, Safety Manager, etc.)Represent in a professional manner in all client interaction activities.Communicate with client, engineers, subcontractors, and vendors on all project related issues.Champion Corporate Safety Plan and develop a site-specific safety plan.Review completions status and schedule progress. Identify productivity problems early and propose solutions.Review all work plans and work packages.Provide support to ensure the site quality plan is communicated and all inspections and quality documentation is being completed on time and assembled for final turn over.Coach Superintendents on monitoring and staying below the estimated Average Labor Rates.Review Job Safety Analysis (JSA’s). Train all craft and staff to correctly complete JSA’s.Lead jobsite safety reviews, toolbox meetings, mass safety meetings, and safety training.Schedule material deliveries and monitor procurement status report.Plan, schedule, and coordinate work groups on the jobsite.Review material takeoffs from drawings, specifications, and other contract documents.Perform basic engineering calculations and technical drafting to support field operations.Review as prepared by Project Engineer, all submittals or transmittals to the customer, vendors, subcontractors, governmental agencies, and internal use.Review and approve major field issued purchase orders and subcontracts.Review and approve all home office issued purchase orders and subcontracts.Provide field support and supervise subcontractor operations.Support all project recordkeeping and correspondence functions including daily reports, photographs, requests for information (RFIs), submittal, transmittal, memorandums, and other contract required correspondence.Develop and review all project controls such as productivity tracking including Average labor rate, indirect scheduling, equipment schedule and log, risk, and opportunity log, etc.Provide information for the creation and maintenance of a master project schedule.Approve and negotiate all change orders to the Prime Contract.Drive the planning process through the master schedule, 6-week, 3-week, 1-week, and manpower curves.Administering Accounting/Job Costs/Work in Progress (WIP) Updates: Learn and Assist the Project Manager with these activities.Lead the budgeting process of taking the Estimate and converting it to the Standard Phase codes.Alert Home Office of trends regarding labor, material, subcontractor and equipment costs.Accurately manage the cost forecasting process for entire project (labor, materials, subcontractors, equipment). Identify trends and suggest corrective actions when needed.Establish the cashflow forecast and curve to ensure positive cashflow for the project.Act as primary company representative in all customer interactions.Know all the provisions, terms, and scope of the Prime contract.Develop and prepare Schedule of Values and all Invoices to customer.Using established personnel requisition process, work with Recruiting to hire staff professionals for your project.Assist Project Engineer in taking the Estimate and converting it to the Standard Phase codes.Approve all construction equipment purchases and rentals.Manage, lead direct reports, and mentor.SUPERVISORY:Supervise 10 or more direct reports, include other Project Manager levels and have the ability to lead a project of up to consisting of up to 500 or more employees and various departments. Qualifications: EDUCATION AND WORK EXPERIENCE REQUIREMENTS:Bachelor’s degree in engineering and construction management.Must have experience in heavy industrial construction in industries such as fossil power generation, mining, metals, heavy manufacturing.Eleven (11) years of construction field experience.KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED:Be knowledgeable of MIC Health and Safety programs and project specific regulations.When on-site, actively participate in daily toolbox meetings with crews and subcontractors.Set a personal example of safe behavior.Ability to read, analyze and identify discrepancies on engineering plans, specifications, and contract documents.Provide constructability and cost saving alternatives at design and construction phases of project.Ability to freely access all points of a construction site in wide-ranging climates and environment.Highly motivated, with a demonstrated passion for excellence and taking initiative.Strong work ethic, willing to do what it takes to get the job done right the first time.Demonstrated commitment to ethics and integrity.Passion for safety, with the ability to help us ensure that nobody gets hurt.Leader with the ability to delegate work and provide support as needed to meet deadlines, goals, and objectives.Willing to travel extensively and relocate to the next project location for an extended period (typically 6-12 months.)Other may duties may be assignedMaintain in-depth relations with all members of their team and your supervisor.PHYSICAL DEMANDS:Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions.May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks.Stamina to perform this task repetitively and continuously for several hour intervals.Uncontrolled environmental conditions: Constant change in weather and site conditions.This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises.Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.).Move in and around confined, cluttered, and uneven areas.May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights.Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings.Visualize objects in three dimensions from drawings.Keep good balance and work at heights.See well (either naturally or with correction).Hear well (either naturally or with correction.)Coordinate the use of eyes, hands, and feet.HOURS:This position is a Full-Time position scheduled to work typically 50 hours per week. Schedule is subject to projects requirements.What's in it for you:Financial WellbeingCompetitive pay of $180,000 - $220,000 with ongoing performance review and merit increase401(k) with company match & Employee Stock Purchase Plan (ESPP)Flexible spending account (Healthcare & Dependent care)Health & WellnessMedical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and childrenDiabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet InsuranceFamily & LifestylePaid Time Off, Paid Holidays, Bereavement LeaveMilitary Leave, including Differential Pay and Benefits ContinuationEmployee Assistance ProgramPlanning for the UnexpectedShort and long-term disability, life insurance, and accidental death & dismembermentVoluntary life insurance, accident, critical illness, hospital indemnity coverageEmergency Travel Assistance ProgramGroup legal planPosition may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact . Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information.MasTec, Inc. is an Equal Employment Opportunity Employer/Disability/Veteran. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions.Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at https://reportfraud.ftc.gov/.MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.#LI-MH1#LI-Onsite Appcast (For Export): #appflash

Overview: The Sr. Project Manager can run a standalone multi-craft, joint venture, or EPC project up to $200+ million dollars. The Sr. Project Manager is responsible for overseeing project Safety, Quality, and all Project Controls required to lead the project. Dependent upon the project structure the PM is responsible for directing engineering, technology providers as well as JV partners. The PM is accountable for all aspects of the project including but not limited to safety, quality, labor, material, scope, client interaction, and overall execution of all disciplines.To successfully manage their work, they must have a thorough understanding of the industry best practices and codes for all disciplines.The role requires interfacing with all areas affected by the project including the client(s), engineering/design, subcontractors, distributors, vendors, and the ongoing strategic communication with project management regarding the status of the project.Location & Travel Details: You can be based in any city or state in the U.S.. This is a traveling, project based position, up to 90% of the time. You have the potential to be placed on a project site located in any state throughout the US. You’ll spend 8-18 months on average per project. We offer designated per diem in addition to an excellent base salary to support and help you cover living expenses. This position is eligible for mobilization support (may include mileage reimbursement), and includes one longer weekend every four weeks for additional time at home. A company vehicle and fuel card OR vehicle allowance will be provided.COMPANY OVERVIEWMasTec’s Clean Energy and Infrastructure Group (CE&I) is a $4 billion annual revenue business unit that provides construction services for industrial facilities; building products manufacturers, power generation facilities, manufacturing plants; solar, wind, and thermal energy plants; buildings, and infrastructure.Within the CE&I group, the MasTec Industrial sector includes sister companies Casey Industrial and Phoenix Industrial. This collective industrial group provides a merit shop, multi-craft industrial contractor with the ability to self-perform all major craft trades that ensures greater safety, quality, flexibility, and economy in delivering the work required to complete each project. The collective experience and knowledge of this team provides comprehensive project development, pre-construction planning, and project management with the mastery to successfully manage projects that meet deliverable and budgetary requirements. With every project, we commit to providing the highest levels of quality, safety, and value.At MasTec Industrial, we are committed to attracting, developing and retaining the best talent. No matter your role, you will have the opportunity to contribute to our success as we deliver innovative solutions to our clients. Responsibilities: ESSENTIAL JOB FUNCTIONS:Oversee and manage entire site management team (Construction Manager, Project Engineer, Quality Manager, Safety Manager, etc.)Represent in a professional manner in all client interaction activities.Communicate with client, engineers, subcontractors, and vendors on all project related issues.Champion Corporate Safety Plan and develop a site-specific safety plan.Review completions status and schedule progress. Identify productivity problems early and propose solutions.Review all work plans and work packages.Provide support to ensure the site quality plan is communicated and all inspections and quality documentation is being completed on time and assembled for final turn over.Coach Superintendents on monitoring and staying below the estimated Average Labor Rates.Review Job Safety Analysis (JSA’s). Train all craft and staff to correctly complete JSA’s.Lead jobsite safety reviews, toolbox meetings, mass safety meetings, and safety training.Schedule material deliveries and monitor procurement status report.Plan, schedule, and coordinate work groups on the jobsite.Review material takeoffs from drawings, specifications, and other contract documents.Perform basic engineering calculations and technical drafting to support field operations.Review as prepared by Project Engineer, all submittals or transmittals to the customer, vendors, subcontractors, governmental agencies, and internal use.Review and approve major field issued purchase orders and subcontracts.Review and approve all home office issued purchase orders and subcontracts.Provide field support and supervise subcontractor operations.Support all project recordkeeping and correspondence functions including daily reports, photographs, requests for information (RFIs), submittal, transmittal, memorandums, and other contract required correspondence.Develop and review all project controls such as productivity tracking including Average labor rate, indirect scheduling, equipment schedule and log, risk, and opportunity log, etc.Provide information for the creation and maintenance of a master project schedule.Approve and negotiate all change orders to the Prime Contract.Drive the planning process through the master schedule, 6-week, 3-week, 1-week, and manpower curves.Administering Accounting/Job Costs/Work in Progress (WIP) Updates: Learn and Assist the Project Manager with these activities.Lead the budgeting process of taking the Estimate and converting it to the Standard Phase codes.Alert Home Office of trends regarding labor, material, subcontractor and equipment costs.Accurately manage the cost forecasting process for entire project (labor, materials, subcontractors, equipment). Identify trends and suggest corrective actions when needed.Establish the cashflow forecast and curve to ensure positive cashflow for the project.Act as primary company representative in all customer interactions.Know all the provisions, terms, and scope of the Prime contract.Develop and prepare Schedule of Values and all Invoices to customer.Using established personnel requisition process, work with Recruiting to hire staff professionals for your project.Assist Project Engineer in taking the Estimate and converting it to the Standard Phase codes.Approve all construction equipment purchases and rentals.Manage, lead direct reports, and mentor.SUPERVISORY:Supervise 10 or more direct reports, include other Project Manager levels and have the ability to lead a project of up to consisting of up to 500 or more employees and various departments. Qualifications: EDUCATION AND WORK EXPERIENCE REQUIREMENTS:Bachelor’s degree in engineering and construction management.Must have experience in heavy industrial construction in industries such as fossil power generation, mining, metals, heavy manufacturing.Eleven (11) years of construction field experience.Knowledge/Skills/AbilitiesBe knowledgeable of MIC Health and Safety programs and project specific regulations.When on-site, actively participate in daily toolbox meetings with crews and subcontractors.Set a personal example of safe behavior.Ability to read, analyze and identify discrepancies on engineering plans, specifications, and contract documents.Provide constructability and cost saving alternatives at design and construction phases of project.Ability to freely access all points of a construction site in wide-ranging climates and environment.Highly motivated, with a demonstrated passion for excellence and taking initiative.Strong work ethic, willing to do what it takes to get the job done right the first time.Demonstrated commitment to ethics and integrity.Passion for safety, with the ability to help us ensure that nobody gets hurt.Leader with the ability to delegate work and provide support as needed to meet deadlines, goals, and objectives.Willing to travel extensively and relocate to the next project location for an extended period (typically 6-12 months.)Other may duties may be assignedMaintain in-depth relations with all members of their team and your supervisor.Work Environment & Physical RequirementsWork up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions.May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks.Stamina to perform this task repetitively and continuously for several hour intervals.Uncontrolled environmental conditions: Constant change in weather and site conditions.This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises.Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.).Move in and around confined, cluttered, and uneven areas.May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights.Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings.Visualize objects in three dimensions from drawings.Keep good balance and work at heights.See well (either naturally or with correction).Hear well (either naturally or with correction.)Coordinate the use of eyes, hands, and feet.What's in it for you:Financial WellbeingCompetitive pay of $180,000 - $220,000 with ongoing performance review and merit increase401(k) with company match & Employee Stock Purchase Plan (ESPP)Flexible spending account (Healthcare & Dependent care)Health & WellnessMedical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and childrenDiabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet InsuranceFamily & LifestylePaid Time Off, Paid Holidays, Bereavement LeaveMilitary Leave, including Differential Pay and Benefits ContinuationEmployee Assistance ProgramPlanning for the UnexpectedShort and long-term disability, life insurance, and accidental death & dismembermentVoluntary life insurance, accident, critical illness, hospital indemnity coverageEmergency Travel Assistance ProgramGroup legal planPosition may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact . Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information.MasTec, Inc. is an Equal Employment Opportunity Employer/Disability/Veteran. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions.Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at https://reportfraud.ftc.gov/.MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.#LI-MH1#LI-Onsite Appcast (For Export): #appred

Job TypeFull-time Description Do you enjoy being out in the field, solving problems in real-time, and guiding teams toward success If you're looking for a career with upward mobility, meaningful work, and a company that recognizes your potentialthis is your moment.At Erie Home, we deliver industry-leading residential roofing solutions that protect homes and families. Our reputation for quality, efficiency, and customer satisfaction has earned us a place in the Top 10 of the Qualified Remodeler Top 500 and recognition on the INC 5000 Fastest Growing Companies list.As a Project Coordinator, you’ll play a critical role in ensuring smooth project executionoverseeing everything from materials management to subcontractor coordination, all while ensuring exceptional service delivery to our customers. You’ll have the backing of a company that provides weekly pay, a company truck, and top-tier benefits.What’s in It for You Earn Over $65,000 Annually – Base salary $50,000-$58,000 plus monthly & quarterly bonusesWeekly Pay & Production-Based BonusesCompany Vehicle, Gas Card & Easy Pass– Company-provided truckno personal vehicle requiredW-2 Employee Benefits – Full medical, dental, and vision coverage, plus a 401(k) with company match and morePaid Time Off & Holiday Pay – 2 weeks of vacation, prorated during your first year, plus paid holidaysExclusive Military Benefits – Tenure-based bonuses up to $5,000 & annual veteran appreciation retreatRealistic Upward Mobility – We value talent and promote from within; 99% of our Installation Manager positions have been filled by internal Project CoordinatorsCell Phone Reimbursement, Company-Provided Tools, and a Clothing Allowance for branded company gearDay in the Life as a Project Coordinator:Oversee all aspects of residential roofing projects – from initial planning to final implementationEnsure a smooth customer experience – managing communication and expectations throughout the installation processLead and coordinate subcontractor crews – ensuring high-quality workmanship and efficiencyOrder and deliver materials to job sites – keeping projects on track and avoiding delaysMaintain project documentation – tracking progress, budgets, and job completion details Requirements Proven leadership in installation, construction, project management, or a similar roleHands-on residential roofing experience is requiredExperience supervising on-site construction personnelTypical work hours are 8:00 AM – 5:00 PM, with flexibility required during peak seasons or periods of increased workloadA valid driver's license with a clean record is requiredOSHA 10 or 30 certification (or a strong safety mindset)Willingness to become forklift certifiedExperience with Office 365, Salesforce, or other CRM software is helpfulAbility to lift up to 65 lbsJoin an Industry Leader in Roofing ExcellenceAt Erie Home, we provide best-in-class home solutions and stand by our commitment to quality, leadership, and customer satisfaction. With nearly 100 locations and $525M+ in annual revenue, we’re expanding nationwide and looking for top talent to help us maintain our reputation as an industry leader.If you’re ready to take ownership, lead with confidence, and oversee projects that make an impactapply today!Erie Home is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, political affiliation, sexual orientation, marital status, disability, age, military service, or any other protected class. If you need a reasonable accommodation due to a disability, please contact Human Resources with your request and contact information. Salary Description $65,000

Installs and troubleshoots industrial equipment, systems, and components, including but not limited to: large capacity washers and dryers, pneumatic and steam systems, conveyor systems, and boilers. Performs maintenance tasks in accordance with all Company safety policies and approved maintenance procedures.1. Equipment and Facility MaintenanceUses common tools including but not limited to: hand and power tools such as hammers, hoists, saws, drills, and wrenches, precision measuring instruments, and electrical and electronic testing devices.Ensures safe operation of machinery, mechanical, electrical, pneumatic, and hydraulic systems equipment and components; following blueprints and schematics, operations manuals, manufacturer's instructions, and engineering specifications.2. SafetyMaintains a safe and clean working environment by complying with procedures and regulations. Performs Lockout/Tagout procedures where appropriate.Performs Confined Space procedures where appropriate.3. General DutiesPosition requires travel to multiple Company locations in order to perform job Provides maintenance information to appropriate partners.Performs various welding activities including MIG, TIG, ARC, cutting, and brazingInstallation of machinery, mechanical, electrical, pneumatic, and hydraulic systems equipment and components following blueprints and schematics, operations manuals, manufacturer’s instructions, and engineering specifications. Performs all other duties as assigned by managerQualificationsThis role follows a 10-day travel schedule, with 4 days at home between assignments. Travel occurs from Monday to the following Wednesday, followed by four days off before the next deployment. This position requires extensive travel, primarily along the East Coast, but may include all U.S. UniFirst locations as needed.Equipment Maintenance Knowledge – Minimum of 6 months’ work experience repairing industrial processing equipment in a production environment. Applicable technical training and/or military experience will be considered.High school diploma or GED required. Ability to read blueprints and schematics preferredAbility to read and understand maintenance literature printed in English required. Experience using Hand & Power tools required.Lockout/Tagout experience is preferred.Prior welding experience including MIG, TIG, ARC, cutting, and brazing Disclaimer Statement: This job description is not intended, nor should it be construed to be an exhaustive list of all responsibilities, duties, skills, or working conditions associated with a job. It is intended to be only a general description of the principal requirements common to positions of this type. Location:This role supports the corporate Maintenance office located in New Kensington, PA. Candidates residing in the Eastern or Central Time Zones will be considered. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Installs and troubleshoots industrial equipment, systems, and components, including but not limited to: large capacity washers and dryers, pneumatic and steam systems, conveyor systems, and boilers. Performs maintenance tasks in accordance with all Company safety policies and approved maintenance procedures.1. Equipment and Facility MaintenanceUses common tools including but not limited to: hand and power tools such as hammers, hoists, saws, drills, and wrenches, precision measuring instruments, and electrical and electronic testing devices.Ensures safe operation of machinery, mechanical, electrical, pneumatic, and hydraulic systems equipment and components; following blueprints and schematics, operations manuals, manufacturer's instructions, and engineering specifications.2. SafetyMaintains a safe and clean working environment by complying with procedures and regulations. Performs Lockout/Tagout procedures where appropriate.Performs Confined Space procedures where appropriate.3. General DutiesPosition requires travel to multiple Company locations in order to perform job Provides maintenance information to appropriate partners.Performs various welding activities including MIG, TIG, ARC, cutting, and brazingInstallation of machinery, mechanical, electrical, pneumatic, and hydraulic systems equipment and components following blueprints and schematics, operations manuals, manufacturer’s instructions, and engineering specifications. Performs all other duties as assigned by managerQualificationsThis role follows a 10-day travel schedule, with 4 days at home between assignments. Travel occurs from Monday to the following Wednesday, followed by four days off before the next deployment. This position requires extensive travel, primarily along the East Coast, but may include all U.S. UniFirst locations as needed.Equipment Maintenance Knowledge – Minimum of 6 months’ work experience repairing industrial processing equipment in a production environment. Applicable technical training and/or military experience will be considered.High school diploma or GED required. Ability to read blueprints and schematics preferredAbility to read and understand maintenance literature printed in English required. Experience using Hand & Power tools required.Lockout/Tagout experience is preferred.Prior welding experience including MIG, TIG, ARC, cutting, and brazing Disclaimer Statement: This job description is not intended, nor should it be construed to be an exhaustive list of all responsibilities, duties, skills, or working conditions associated with a job. It is intended to be only a general description of the principal requirements common to positions of this type. Location:This role supports the corporate Maintenance office located in New Kensington, PA. Candidates residing in the Eastern or Central Time Zones will be considered. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Installs and troubleshoots industrial equipment, systems, and components, including but not limited to: large capacity washers and dryers, pneumatic and steam systems, conveyor systems, and boilers. Performs maintenance tasks in accordance with all Company safety policies and approved maintenance procedures.1. Equipment and Facility MaintenanceUses common tools including but not limited to: hand and power tools such as hammers, hoists, saws, drills, and wrenches, precision measuring instruments, and electrical and electronic testing devices.Ensures safe operation of machinery, mechanical, electrical, pneumatic, and hydraulic systems equipment and components; following blueprints and schematics, operations manuals, manufacturer's instructions, and engineering specifications.2. SafetyMaintains a safe and clean working environment by complying with procedures and regulations. Performs Lockout/Tagout procedures where appropriate.Performs Confined Space procedures where appropriate.3. General DutiesPosition requires travel to multiple Company locations in order to perform job Provides maintenance information to appropriate partners.Performs various welding activities including MIG, TIG, ARC, cutting, and brazingInstallation of machinery, mechanical, electrical, pneumatic, and hydraulic systems equipment and components following blueprints and schematics, operations manuals, manufacturer’s instructions, and engineering specifications. Performs all other duties as assigned by managerQualificationsThis role follows a 10-day travel schedule, with 4 days at home between assignments. Travel occurs from Monday to the following Wednesday, followed by four days off before the next deployment. This position requires extensive travel, primarily along the East Coast, but may include all U.S. UniFirst locations as needed.Equipment Maintenance Knowledge – Minimum of 6 months’ work experience repairing industrial processing equipment in a production environment. Applicable technical training and/or military experience will be considered.High school diploma or GED required. Ability to read blueprints and schematics preferredAbility to read and understand maintenance literature printed in English required. Experience using Hand & Power tools required.Lockout/Tagout experience is preferred.Prior welding experience including MIG, TIG, ARC, cutting, and brazing Disclaimer Statement: This job description is not intended, nor should it be construed to be an exhaustive list of all responsibilities, duties, skills, or working conditions associated with a job. It is intended to be only a general description of the principal requirements common to positions of this type. Location:This role supports the corporate Maintenance office located in New Kensington, PA. Candidates residing in the Eastern or Central Time Zones will be considered. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Now Hiring for all positions including Short Term Contracts, Full Time, Part Time, and PRN. Now offering flexible scheduling! 2025 UPDATED FULL & PART TIME RATES - New Grad Rate of $36.00. Experienced Nurses starting rates of $38.50 to $46.25 plus shift differentials. Short Term Contracts: $55/hour, 8-week long assignments, full time hours. Full Time & Part Time Positions: $36-46/hour to start depending on experience with $3.00 shift differential for evenings and $5.00 shift differentials for nights. PRN Positions: $40-45/hour depending on schedule. Encompass offers generous benefits including health insurance starting on your first day of employment along with opportunities for advancement that include significant incentives. Come grow with us! Short-Term Contract Roles:As a Short-Term Contract RN, you will have the opportunity to make a meaningful impact while enjoying the flexibility of a temporary assignment. Whether you're seeking temporary work to accommodate personal commitments, explore different healthcare settings, or gain diverse experience, we have flexible 8-week contract positions available.Full-Time and Part-Time Employment Opportunities:For those ready to commit to a long-term career with us, we offer full-time and part-time employment opportunities that provide stability, comprehensive benefits, and room for career advancement. As a RN, you will play an integral role in delivering high-quality patient care, collaborating with interdisciplinary teams, and making a lasting difference in the lives of patients and communities we serve.Why Encompass Health Where Nursing Meets Heart, Home, and HealingAre you seeking a nursing career deeply rooted in purpose, close to your heart and home Encompass Health offers a transformative journey where your expertise as a Registered Nurse becomes an integral part of patients' recoveries. Picture the impact of providing individualized, compassionate care that guides patients along their path to healing. With us, small victories lead to monumental impacts as you use your specialized skills to offer top-tier, personalized support. Understand your patients deeply, assist in their rehabilitation goals, and thrive in an environment equipped with cutting-edge technology. Welcome to a place where nursing becomes a profound contribution to both community and personal fulfillment.A Glimpse into Our WorldAt Encompass Health, you'll experience the difference the moment you become a part of our team. Being at Encompass Health means aligning with a rapidly growing national inpatient rehabilitation leader. We take pride in the growth opportunities we offer and how our team unites for the greater good of our patients. Our achievements include being named one of the "World's Most Admired Companies" and receiving the Fortune 100 Best Companies to Work For® Award, among other accolades, which is nothing short of amazing.Starting Perks and BenefitsOur benefits are designed to support your well-being and start on day one:Affordable medical, dental, and vision plans for both full-time and part-time employees and their families.Generous paid time off that accrues over time.Opportunities for tuition reimbursement and continuous education.Company-matching 401(k) and employee stock purchase plans.Flexible spending and health savings accounts.A vibrant community of individuals passionate about the work they do!Realize Your Vision as a Registered NurseSupervise care and treatments, lead patient assessments, tailor care plans, and address patient concerns to provide exceptional care.Build meaningful relationships with patients and their families, understanding their unique needs to facilitate their recovery.Collaborate and communicate effectively with various departments to ensure coordinated care and provide direct patient care when needed.Serve as a resource for fellow staff, supporting them with complex patient needs and inquiries.Celebrate victories and milestones achieved by our patients. QualificationsValid RN licensures as required by state regulationsCPR certification (ACLS preferred)CRRN certification preferredOne year of experience in a rehabilitation hospital setting is preferredThe Encompass Health WayWe proudly set the standard in care by leading with empathy, doing what's right, focusing on the positive, and standing stronger together. Encompass Health is a trusted leader in post-acute care with over 150 nationwide locations and a team of 36,000 exceptional individuals and growing!At Encompass Health, we celebrate and welcome diversity in our inclusive culture. We provide equal employment opportunities regardless of race, ethnicity, gender, sexual orientation, gender identity or expression, religion, national origin, color, creed, age, mental or physical disability, or any other protected classification.We're eager to meet you, and we genuinely mean that. Join us on this remarkable journey.

New Directions Mental Health, a member of Transformations Care Network (TCN), is excited to embark on an exciting journey to empower Independently Licensed Therapists like you to make a difference in the field of behavioral health. We are committed to improving access to mental health care in our communities which means we are committed to being a great place to be a therapist. $3,000 Sign-On Bonus Available Now Through July!Join our team at New Directions Mental Health and receive a sign-on bonus when you begin your journey with us this summer.As an independently licensed Therapist (LPC, LCSW) on our team, you will experience an environment where both you and your clients can thrive. Emerging, early career therapists appreciate a collaborative environment, where they are supported by a clinical team that prioritizes growth and development as they work to gain licensure. Our clinics provide a supportive space to practice therapeutic interventions and develop skills that impact our diverse local community. Licensed Therapists appreciate the ability to practice in a sustainable and personalized way, with the support of a clinical and administrative team. Leadership and supervision opportunities allow our Therapists to build a career that works for them while guiding the next generation of mental health providers. Key Responsibilities:Conduct culturally sensitive, strength-based assessments for new clients and families, creating a welcoming and understanding environment for diverse backgrounds.Provide tailored outpatient individual and family therapy based on the unique needs and circumstances of each client, fostering a path to healing and resilience.Develop comprehensive crisis plans, safety plans, relapse prevention plans, and wellness plans, supporting the maintenance of stable functioning and empowering clients in their mental health journey.Actively participate in case consultations, agency meetings, and discharge planning, contributing your expertise to enhance client care.Ensure timely completion of billing, documentation, individualized treatment plans, and insurance authorization forms, upholding the highest standards of professional responsibility.Engage in collaborative care with our team of psychiatrists, nurse practitioners, dietitians, administrative staff, and fellow therapists, to provide a holistic approach to mental health care.Qualifications: Possess a Master’s degree in Social Work, Counseling, Marriage and Family Counseling, or a related field.Independent license (LPC, LCSW, LMFT) per state regulation.Educational background that leads to or has resulted in professional licensing.Passionate about mental health and committed to providing high-quality care.Dedicated to ongoing professional development in mental health including free supervision and continuing education.Eager to collaborate with a multidisciplinary team to enhance client care.Strong commitment to ethical practice and maintaining confidentiality.Excellent communication skills and ability to build rapport with clients and families.Ability to manage time effectively and complete documentation and administrative tasks efficiently.Explore the Advantages of Joining Our Team:Enjoy competitive compensation and a wide range of benefits, including medical, dental, vision, low-cost virtual care, dependent and domestic partner coverage, 401K, and more, designed to support your well-being and financial security.Immerse yourself in a community united by a deep commitment to enhance mental health and revolutionize the care that clients receive.Embrace a journey of growth and development through continuous learning, guided by seasoned professionals, fostering your career growth in a nurturing environment.Play a pivotal role in reshaping how mental health care is perceived and delivered in your local community as well as on a national scale, with your efforts directly improving client lives.Deliver mental health care in a sustainable way, with the support and tools you need to thrive.Thrive in an environment that celebrates collaborative success, driven by effective communication, support, and unity.Receive comprehensive onboarding and ongoing educational resources, tailored to cultivate your talents, and assure your triumph in your role.Transformations Care Network is an equal opportunity employer, committed to fostering an inclusive and diverse workplace.