Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Installs and troubleshoots industrial equipment, systems, and components, including but not limited to: large capacity washers and dryers, pneumatic and steam systems, conveyor systems, and boilers. Performs maintenance tasks in accordance with all Company safety policies and approved maintenance procedures.1. Equipment and Facility MaintenanceUses common tools including but not limited to: hand and power tools such as hammers, hoists, saws, drills, and wrenches, precision measuring instruments, and electrical and electronic testing devices.Ensures safe operation of machinery, mechanical, electrical, pneumatic, and hydraulic systems equipment and components; following blueprints and schematics, operations manuals, manufacturer's instructions, and engineering specifications.2. SafetyMaintains a safe and clean working environment by complying with procedures and regulations. Performs Lockout/Tagout procedures where appropriate.Performs Confined Space procedures where appropriate.3. General DutiesPosition requires travel to multiple Company locations in order to perform job Provides maintenance information to appropriate partners.Performs various welding activities including MIG, TIG, ARC, cutting, and brazingInstallation of machinery, mechanical, electrical, pneumatic, and hydraulic systems equipment and components following blueprints and schematics, operations manuals, manufacturer’s instructions, and engineering specifications. Performs all other duties as assigned by managerQualificationsThis role follows a 10-day travel schedule, with 4 days at home between assignments. Travel occurs from Monday to the following Wednesday, followed by four days off before the next deployment. This position requires extensive travel, primarily along the East Coast, but may include all U.S. UniFirst locations as needed.Equipment Maintenance Knowledge – Minimum of 6 months’ work experience repairing industrial processing equipment in a production environment. Applicable technical training and/or military experience will be considered.High school diploma or GED required. Ability to read blueprints and schematics preferredAbility to read and understand maintenance literature printed in English required. Experience using Hand & Power tools required.Lockout/Tagout experience is preferred.Prior welding experience including MIG, TIG, ARC, cutting, and brazing Disclaimer Statement: This job description is not intended, nor should it be construed to be an exhaustive list of all responsibilities, duties, skills, or working conditions associated with a job. It is intended to be only a general description of the principal requirements common to positions of this type. Location:This role supports the corporate Maintenance office located in New Kensington, PA. Candidates residing in the Eastern or Central Time Zones will be considered. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Installs and troubleshoots industrial equipment, systems, and components, including but not limited to: large capacity washers and dryers, pneumatic and steam systems, conveyor systems, and boilers. Performs maintenance tasks in accordance with all Company safety policies and approved maintenance procedures.1. Equipment and Facility MaintenanceUses common tools including but not limited to: hand and power tools such as hammers, hoists, saws, drills, and wrenches, precision measuring instruments, and electrical and electronic testing devices.Ensures safe operation of machinery, mechanical, electrical, pneumatic, and hydraulic systems equipment and components; following blueprints and schematics, operations manuals, manufacturer's instructions, and engineering specifications.2. SafetyMaintains a safe and clean working environment by complying with procedures and regulations. Performs Lockout/Tagout procedures where appropriate.Performs Confined Space procedures where appropriate.3. General DutiesPosition requires travel to multiple Company locations in order to perform job Provides maintenance information to appropriate partners.Performs various welding activities including MIG, TIG, ARC, cutting, and brazingInstallation of machinery, mechanical, electrical, pneumatic, and hydraulic systems equipment and components following blueprints and schematics, operations manuals, manufacturer’s instructions, and engineering specifications. Performs all other duties as assigned by managerQualificationsThis role follows a 10-day travel schedule, with 4 days at home between assignments. Travel occurs from Monday to the following Wednesday, followed by four days off before the next deployment. This position requires extensive travel, primarily along the East Coast, but may include all U.S. UniFirst locations as needed.Equipment Maintenance Knowledge – Minimum of 6 months’ work experience repairing industrial processing equipment in a production environment. Applicable technical training and/or military experience will be considered.High school diploma or GED required. Ability to read blueprints and schematics preferredAbility to read and understand maintenance literature printed in English required. Experience using Hand & Power tools required.Lockout/Tagout experience is preferred.Prior welding experience including MIG, TIG, ARC, cutting, and brazing Disclaimer Statement: This job description is not intended, nor should it be construed to be an exhaustive list of all responsibilities, duties, skills, or working conditions associated with a job. It is intended to be only a general description of the principal requirements common to positions of this type. Location:This role supports the corporate Maintenance office located in New Kensington, PA. Candidates residing in the Eastern or Central Time Zones will be considered. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Installs and troubleshoots industrial equipment, systems, and components, including but not limited to: large capacity washers and dryers, pneumatic and steam systems, conveyor systems, and boilers. Performs maintenance tasks in accordance with all Company safety policies and approved maintenance procedures.1. Equipment and Facility MaintenanceUses common tools including but not limited to: hand and power tools such as hammers, hoists, saws, drills, and wrenches, precision measuring instruments, and electrical and electronic testing devices.Ensures safe operation of machinery, mechanical, electrical, pneumatic, and hydraulic systems equipment and components; following blueprints and schematics, operations manuals, manufacturer's instructions, and engineering specifications.2. SafetyMaintains a safe and clean working environment by complying with procedures and regulations. Performs Lockout/Tagout procedures where appropriate.Performs Confined Space procedures where appropriate.3. General DutiesPosition requires travel to multiple Company locations in order to perform job Provides maintenance information to appropriate partners.Performs various welding activities including MIG, TIG, ARC, cutting, and brazingInstallation of machinery, mechanical, electrical, pneumatic, and hydraulic systems equipment and components following blueprints and schematics, operations manuals, manufacturer’s instructions, and engineering specifications. Performs all other duties as assigned by managerQualificationsThis role follows a 10-day travel schedule, with 4 days at home between assignments. Travel occurs from Monday to the following Wednesday, followed by four days off before the next deployment. This position requires extensive travel, primarily along the East Coast, but may include all U.S. UniFirst locations as needed.Equipment Maintenance Knowledge – Minimum of 6 months’ work experience repairing industrial processing equipment in a production environment. Applicable technical training and/or military experience will be considered.High school diploma or GED required. Ability to read blueprints and schematics preferredAbility to read and understand maintenance literature printed in English required. Experience using Hand & Power tools required.Lockout/Tagout experience is preferred.Prior welding experience including MIG, TIG, ARC, cutting, and brazing Disclaimer Statement: This job description is not intended, nor should it be construed to be an exhaustive list of all responsibilities, duties, skills, or working conditions associated with a job. It is intended to be only a general description of the principal requirements common to positions of this type. Location:This role supports the corporate Maintenance office located in New Kensington, PA. Candidates residing in the Eastern or Central Time Zones will be considered. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Description:Registered Nurse (RN), Behavioral Medicine Job Type: Full-time | Variable 12-hour Shift w/EOWUp to $20,000 Sign-on BonusDepartment/Unit SummaryThe Adult Psychiatric Unit is a 29-bed locked unit. The unit provides comprehensive mental health care to individuals between the ages of 18-59. Individuals over the age of 59 are evaluated for admission on an individual basis. Patients admitted to the unit have a primary DSM 5 diagnosis/es. However, patients may also have additional diagnoses, including, but not limited to Intellectual Disabilities, Autism, medical comorbidities, etc. Patients must be medically stable as a criteria for admission. Safety practices include 15-minute safety checks, staff monitoring of all community areas and staff presence during meals and visiting hours. Nursing care, daily psychiatric assessments, therapy and medication management are provided to meet the emotional, behavioral, physical, cultural, educational and spiritual needs of the adult patient population. The nurses work 12-hour shifts (7A & 7P). There is great teamwork among the staff.Your experience mattersAt Conemaugh Memorial Medical Center we are driven by a profound commitment to prioritize your well-being so you can provide exceptional care to others. Here, you're not just valued as an employee, but as a person. As a registered nurse (RN) joining our team, you're embracing a vital mission dedicated to making communities healthier. Join us on this meaningful journey where your skills, compassion, and dedication will make a remarkable difference in the lives of those we serve.Connect with our RN recruiting specialistNot ready to complete an application, or have questions Please contact Megan by calling or emailing About our Health SystemConemaugh Memorial Medical Center is a 420 Bed, Level 1 Trauma Center, located in Johnstown, PA, and is part of Lifepoint Health, a diversified healthcare delivery network committed to making communities healthier® with acute care, rehabilitation, and behavioral health facilities from coast to coast. From your first day to your next career milestone-your experience matters.How you'll contribute You'll make an impact by utilizing your specialized plan-of-care intervention and serving as a patient-care innovator. You will shape exceptional patient journeys every day and leverage your skills and our cutting-edge technology to directly impact patient wellbeing. What we offerFundamental to providing great care is supporting and rewarding our team. In addition to your base compensation, this position also offers:·Up to $20,000 Sign-on Bonus·Comprehensive medical, dental, and vision plans, plus flexible-spending and health- savings accounts ·Competitive paid time off and extended illness bank package for full-time employees·Income-protection programs, such as life, accident, critical-injury insurance, short- and long-term disability, and identity theft coverage·Tuition reimbursement, loan assistance, and 401(k) matching ·Employee assistance program including mental, physical, and financial wellness·Professional development and growth opportunitiesQualifications:Qualifications and requirementsApplicants should have a current state RN license and possess an associates or bachelor's degree from an accredited nursing school. Additional requirements include:·Basic Life Support certification is required within 30 days of hire·CPR Certification preferred·Dysrhythmia Certification preferredEEOC StatementConemaugh Memorial Medical Center is an Equal Opportunity Employer. Conemaugh Memorial Medical Center is committed to Equal Employment Opportunity for all applicants and employees and complies with all applicable laws prohibiting discrimination and harassment in employment.

Description:Registered Nurse (RN), Behavioral Medicine PRN/HourlyJob Type: PRN/Hourly | 12-hour shift per pay periodDepartment/Unit SummaryThe Adult Psychiatric Unit is a 29-bed locked unit. The unit provides comprehensive mental health care to individuals between the ages of 18-59. Individuals over the age of 59 are evaluated for admission on an individual basis. Patients admitted to the unit have a primary DSM 5 diagnosis/es. However, patients may also have additional diagnoses, including, but not limited to Intellectual Disabilities, Autism, medical comorbidities, etc. Patients must be medically stable as a criteria for admission. Safety practices include 15-minute safety checks, staff monitoring of all community areas and staff presence during meals and visiting hours. Nursing care, daily psychiatric assessments, therapy and medication management are provided to meet the emotional, behavioral, physical, cultural, educational and spiritual needs of the adult patient population. The nurses work 12-hour shifts (7A & 7P). There is great teamwork among the staff.Your experience mattersAt Conemaugh Memorial Medical Center we are driven by a profound commitment to prioritize your well-being so you can provide exceptional care to others. Here, you're not just valued as an employee, but as a person. As a registered nurse (RN) joining our team, you're embracing a vital mission dedicated to making communities healthier. Join us on this meaningful journey where your skills, compassion, and dedication will make a remarkable difference in the lives of those we serve.Connect with our RN recruiting specialistNot ready to complete an application, or have questions Please contact Megan by calling/texting or emailing About our Health SystemConemaugh Memorial Medical Center is a 420 Bed, Level 1 Trauma Center, located in Johnstown, PA, and is part of Lifepoint Health, a diversified healthcare delivery network committed to making communities healthier® with acute care, rehabilitation, and behavioral health facilities from coast to coast. From your first day to your next career milestone-your experience matters.How you'll contribute You'll make an impact by utilizing your specialized plan-of-care intervention and serving as a patient-care innovator. You will shape exceptional patient journeys every day and leverage your skills and our cutting-edge technology to directly impact patient wellbeing. What we offerFundamental to providing great care is supporting and rewarding our team. In addition to your base compensation, this position also offers:·Comprehensive medical, dental, and vision plans, plus flexible-spending and health- savings accounts ·Competitive paid time off and extended illness bank package for full-time employees·Income-protection programs, such as life, accident, critical-injury insurance, short- and long-term disability, and identity theft coverage·Tuition reimbursement, loan assistance, and 401(k) matching ·Employee assistance program including mental, physical, and financial wellness·Professional development and growth opportunitiesQualifications:Qualifications and requirementsApplicants should have a current state RN license and possess an associates or bachelor's degree from an accredited nursing school. Additional requirements include:·Basic Life Support certification is required within 30 days of hire·CPR Certification preferred·Dysrhythmia Certification preferredEEOC StatementConemaugh Memorial Medical Center is an Equal Opportunity Employer. Conemaugh Memorial Medical Center is committed to Equal Employment Opportunity for all applicants and employees and complies with all applicable laws prohibiting discrimination and harassment in employment.