Muskogee, OK • (17.7 miles) • Full Time • 10/3/2026

Position Overview:We are seeking a Project Engineer to support commercial construction projects, with a strong preference for candidates who have mission-critical or data center construction experience.The Project Engineer will coordinate project controls, administration, and document management while supporting contract compliance, procurement, scheduling, cost control, quality, billing, and project closeout.Local Oklahoma-based candidates are strongly preferred. Candidates should be able to work at the Muskogee project location on a daily basis. Relocation or travel candidates will be considered only after local recruiting efforts have been exhausted.Key Responsibilities:Manage RFIs, submittals, project logs, meeting minutes, correspondence, and document control.Perform constructability

Muskogee, OK • (17.7 miles) • Full Time • 10/1/2026

Essential Duties & Responsibilities- Program CNC mills and lathes using CAM software and/or conversational programming.Set up and operate CNC machinery to produce precision parts according to specifications.Read and interpret blueprints, engineering drawings, and work instructions.Select appropriate tooling, fixtures, speeds, and feeds for efficient machining.Perform first-piece, in-process, and final inspections using precision measuring instruments.Make program edits and machine adjustments to improve quality and productivity.Troubleshoot machining issues and recommend process improvements.Maintain dimensional accuracy and quality standards throughout production.Perform routine machine maintenance and keep equipment in good working condition.Follow all safety procedures and maintain a cl

Muskogee, OK • (17.7 miles) • Full Time • 9/30/2026

We are looking for a dedicated Manufacturing Process Engineer to enhance operational reliability, safety, and productivity within our heavy industrial facilities. This role works directly alongside floor personnel to minimize process variability, implement root-cause solutions, and advance equipment efficiency across heavy component processing lines.ResponsibilitiesEHS Leadership: Design and implement engineering solutions that reduce workplace hazards, maintain strict safety standards, and encourage proactive risk management.Process Optimization & Problem Solving: Lead targeted continuous improvement projects and daily root-cause analyses aimed at lowering operational costs, raising throughput, and integrating new technology.Variation Control: Evaluate process metrics and key operational

Broken Arrow, OK 74014 • (44 miles) • Full Time • 9/23/2026

POSITION DESCRIPTION1. POSITION IDENTIFICATIONTitle Sales EngineerFunctional Area Infrastructure SystemsReports to Infrastructure Systems DirectorCompensation Range $60,000 annuallyEmployment Status Full Time2. POSITION OBJECTIVEConvert a qualified customer need into an accurate, supportable, profitable technical solution and a complete handoff package that the Project Manager and technicians can execute without avoidable discovery, rework, or rescue.3. GENERAL RESPONSIBILITIESResponsibilities include but are not limited to:•Demonstrated ability to discover, design, estimate, document, and explain technical solutions inInfrastructure, low-voltage, networking, security, AV, structured cabling, or a closely related environment.•Strong technical writing, drawing interpretation/creation, BOM d

Coweta, OK • (38.3 miles) • Full Time • 9/16/2026

Steel Operations General Superintendent – Lead PEMB Operations for NorthStar SteelJob Overview:Company: NorthStar SteelSalary/Pay Rate: $90,000 - $115,000 per year (based on experience)Location: Catoosa, OKJob/Employment Type: Full TimeProject Scope: Commercial, Industrial, and Pre-Engineered Metal Buildings (PEMB)Mandatory Licences & Certifications: OSHA 30The Opportunity You will serve as the primary management authority for NorthStar Steel's field operations, leading the execution of complex commercial and industrial steel erection projects. This role empowers you with direct lines to executive leadership and the operational autonomy needed to build high-performing field teams. You will drive overall business profitability and growth while directly shaping our long-term field standards,

Stigler, OK 74462 • (16.8 miles) • Full Time • 10/3/2026

Training/Base pay rate of $17.00 per hour. The Base Pay increases by $.50 at 60 days of employment.We have a Guaranteed Hourly Rate of $20.00 per hour upon completion of training through your first 9 months. This allows time to build your bonus and commission skills. If your post-training base rate, plus bonuses and commission don’t bring you to the Guaranteed Hourly Rate, we will increase your pay. However, the earning potential is much higher!Schedule: This position requires working 5 days a week, which includes working on holidays. Your designated days off each week will be Sunday and Monday.Bonus Opportunity: Earn a Trained and Active Bonus of $500.00, half of which you receive at approximately 60 days and the other at approximately 6 months.About Us: At Southern Star, we are the drivi

Beggs, OK 74421 • (44.9 miles) • Full Time • 10/3/2026

About the Role:We are seeking a Level II NDT Field Technician to join our team in Oklahoma, OKLA. As a Level II NDT Field Technician, you will be responsible for performing non-destructive testing on various materials and components in the Oil and Gas Extraction Mining and Quarrying industry. Your main objective will be to ensure that all materials and components meet the required standards and specifications. You will be working in a fast-paced environment, where attention to detail and accuracy are crucial to the success of the job.Minimum Qualifications:Level II NDT certification in ultrasonic, magnetic particle, or liquid penetrant testingHigh school diploma or equivalentValid driver's license and reliable transportationAbility to work in a physically demanding environment and lift up

Bixby, OK 74008 • (43.8 miles) • Full Time • 9/19/2026

Bury Telecommunication line (Drop) to the Residents, in OK (Tulsa and surrounding areas). Using Cable Plow, Boring Equipment (not Directional) and hand tools. Equipment and Materials will be provided.Will need your own truck (1/2 ton or bigger) and tools.Experience preferred but not required.Job Posted by ApplicantPro

Warner, OK 74469 • (1.3 miles) • Full Time • 9/15/2026

Cross in Warner, OK is looking to add a Field Technician to our team!Job Summary and Objectives:Field Technician level I is responsible for the installation, maintenance, and troubleshooting of in-home telephone and broadband systems. This role requires working both inside and outside homes and businesses, performing tasks such as pulling and terminating cables, conducting installations, and testing equipment to ensure service quality.Essential Job Functions:· Install, terminate, and test telephone and broadband systems within homes and businesses.· Repair copper and fiber issues in the home and perform installation prework.· Pull, run, and terminate cables (Cat5, coaxial, twisted pair, optical fiber) in attics, crawlspaces, walls, and other areas.· Troubleshoot and resolve broadband and t

Broken Arrow, OK 74014 • (44 miles) • Full Time • 9/15/2026

Field Service Engineer/Tech Job DescriptionProvide solutions for any burner or related equipment problems that may arise in the field with little to no supervisionCommunicate professionally and effectively with personnel including plant managers, skilled labor, and internal team membersSupervise and manage contractors or other personnel while on siteManage workflow based on customer expectations while on siteFollow written and verbal instructions to ensure combustion systems are installed and operating correctlyPerform start-up, operation, and troubleshooting of all combustion systems and/or equipmentCreate and submit detailed reportsQualificationsAssociate’s degree in an Engineering discipline or comparable field experienceAbility to travel a minimum of 60%Working knowledge of Microsoft O

Stilwell, OK 74960 • (43.1 miles) • Full Time • 10/5/2026

Job Title: Engineering/Technical - Env., Health, and Safety Engineer*Contract 6 months*On Site M- F 7-3 PM EST*Strong Leadership skills, required certificationEnvironmental, Health, and Safety (EHS) Specialist to provide on-the-floor EHS support at our manufacturing facility.Primary Responsibilities:* Conducting routine floor audits and safety observations.* Supporting employee engagement and safety initiatives.* Assisting with incident investigations and corrective action follow-up.* Monitoring compliance with applicable EHS policies and procedures.* Providing guidance and coaching to operators, supervisors, and managers on EHS matters.* Assisting with hazard identification and risk reduction activities.* Supporting safety training and communication efforts as needed.* Maintaining EHS doc

Fort Gibson, OK 74434 • (21 miles) • Full Time • 10/2/2026

Make a Difference in YOUR Career!Our vision is both simple and ambitious: to put our drinks on every table.We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks.Our ambition is to continually improve and it’s what keeps us at the top of our game.We are solutions-based.We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it’s our people’s too:Refresco is at th

Muskogee, OK 74403 • (12.7 miles) • Full Time • 9/25/2026

Make an Impact With UsAt Vallourec, we are seeking a Process Engineer whose passion for safety, continuous improvement, and technical excellence matches the strength and resilience of the steel we produce. In this role, you will be a key driver of operational performance - partnering closely with production teams to improve quality, efficiency, and process stability across our pipe finishing operations.Your Role at a GlanceDemonstrate a strong commitment to safety by designing and supporting engineered controls that enable safe operations, proactively identifying and mitigating at-risk conditions and behaviors.Drive daily problem-solving and targeted short- and long-term projects to improve quality, productivity, efficiency, cost, and the adoption of new technologies within assigned proces

Sallisaw, OK 74955 • (31.1 miles) • Full Time • 9/24/2026

Assembly Process Engineer Department: Engineering / ManufacturingEmployment Type: Full-TimeLocation: On-site (Sallisaw, OK)Job SummaryWe are seeking an experienced Assembly Process Engineer to design, optimize, and maintain high-efficiency production and assembly systems. In this role, you will ensure that assembly equipment, specialized tooling, and operational workflows operate seamlessly to produce high-quality parts while minimizing downtime, scrap, and waste. Serving as a crucial bridge between product design, quality, and shop floor execution, you will lead continuous improvement initiatives, troubleshoot technical line bottlenecks, and drive overall production efficiency.Key ResponsibilitiesProcess Development & Optimization:Design, evaluate, and refine assembly workflows (including

Sallisaw, OK 74955 • (31.1 miles) • Full Time • 9/15/2026

Job Summary: A CNC Process Engineer is responsible for developing, optimizing, and troubleshooting CNC machining processes to ensure efficiency, precision, and high-quality production output. They bridge the gap between design and manufacturing, focusing on tooling, programming, and process improvements. Key Responsibilities:Process Development & OptimizationDesign, implement, and refine CNC machining processes.Select cutting tools, speeds, feeds, and parameters for optimal performance.Reduce cycle times, scrap, and rework through continuous improvement.Programming & ToolingCreate and modify CNC programs using CAD/CAM software, G Code.Develop detailed process plans and work instructions for operators.Ensure proper tooling design and setup for precision machining.Quality & ComplianceCollabo

Muskogee, OK 74401 • (18.1 miles) • Full Time • 10/2/2026

Benefits:Flexible scheduleOpportunity for advancementProfit sharingThis Is Not Your Average Tech Job Are you a hands-on I.T. or Telecom professional looking for something beyond the desk? AMG Tech Support is seeking skilled, driven technicians to support our growing national client base. This role goes far beyond basic helpdesk tasks one day you might be installing an operating system, the next you're drilling through walls and running structured cabling across entire buildings, or terminating a 66-block. If you're the kind of person who thrives in the field and loves the variety that comes with every job site, this opportunity is for you. Job ResponsibilitiesPerform a wide range of technical tasks including but not limited to: OS installations, hardware diagnostics, and software setupStru

Sallisaw, OK 74955 • (31.1 miles) • Full Time • 9/24/2026

CNC Process EngineerPosition: CNC Process EngineerDepartment: Engineering / ManufacturingReports To: Engineering ManagerEmployment Type: Full-TimeLocation: On-site (Manufacturing / Production Facility)Job SummaryWe are seeking a skilled CNC Process Engineer to develop, optimize, and troubleshoot precision CNC machining operations. Serving as the primary technical bridge between product design and production, this role focuses on refining tooling, programming, and manufacturing workflows to maximize operational efficiency, minimize cycle times, and ensure exceptional product quality.Key ResponsibilitiesProcess Development & Optimization:Design, implement, and continually refine multi-axis CNC machining processes.Select optimal cutting tools, speeds, feeds, and machining parameters.Drive con

Broken Arrow, OK 74014 • (44 miles) • Full Time • 9/24/2026

Job Title: Applications Engineering Lead/MgrType: Direct HireWork Model: OnsiteSystem One is partnering with a local client looking for an Applications Engineering lead/managerWe are seeking an experienced Applications Engineering Team Lead to oversee a team of engineers supporting installation and construction projects. This role combines technical leadership, customer engagement, proposal development, project planning, and cross-functional collaboration to deliver successful project outcomes. The ideal candidate will bring strong engineering expertise, leadership experience, and a customer-focused approach.ResponsibilitiesLead a team of Applications Engineers responsible for reviewing customer inquiries, defining project scope, and planning equipment installation activities.Travel to cus

Sallisaw, OK 74955 • (31.1 miles) • Full Time • 9/15/2026

Job Summary: An Assembly Process Engineer is responsible to ensure that assembly equipment, tools, and systems are functioning efficiently, producing high-quality parts while minimizing waste and downtime, managing, and improving the assembly processes of products, particularly in manufacturing or production environments. They play a critical role in ensuring that products are assembled efficiently, meet quality standards, and are delivered on time. The job typically involves a combination of technical design, process improvement, and team coordination. Key Responsibilities:1. Process Development & Optimization:Design, develop, and optimize assembly processes (washing, pressing, leak or other testing, etc.) to improve production efficiency.Use techniques like Lean Manufacturing or Six Sigm