FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Bluehalo, an AV Companyis seeking a Research Engineer in the area of Machine Learning for Robotics and Natural Language Processing, to serve at Wright-Patterson Air Force Base in Dayton, OH. The position will be in collaboration with the Digital Manufacturing Research Team of the Materials and Manufacturing Directorate. Fields like artificial intelligence, computer vision, and collaborative robotics are advancing rapidly with impact in numerous application spaces. Long term success in environments such as aerospace manufacturing and maintenance will require greater accuracy, reliability, and attention to detail than other areas. Our team of researchers aims to meet this challenge through innovative techniques including leveraging multiple modalities of input data, careful fine-tuning for particular use cases of interest, and emphasizing specialized approaches such as semantic segmentation sitting within higher level, generalist architectures. The ideal candidate will propose, develop, and characterize novel approaches to advance the ways humans can interact with collaborative robots and AI generally in manufacturing and maintenance environments. Key Responsibilities: Collect and curate datasets for advancing human-machine co-learning by developing custom techniques for multimodal data acquisition, post-processing, automatic tagging, and cloud storage.Leverage in house data (audio, visual, motion capture) to fine tune large scale models for improved performance on manufacturing, assembly, and maintenance tasks.Provide regular communication and feedback to the team regarding progress, setbacks, and new research opportunities.Contribute to a collaborative team environment by engaging in creative discussions with members working in related areas, with opportunities to engage in research areas such as robotics, advanced manufacturing, and AI-guided design optimization.Participate in the academic community by writing papers, giving seminars, and leading workshops.Ensure compliance of human subject’s research with approved Institutional Review Board (IRB) approved protocols. Requirement Qualifications: This position is onsite at a government facility and requires U.S. citizenshipMaster’s degree in computer science, engineering, or related field.Self-motivation, ability to work cooperatively in diverse teams, and flexibility for evolving program objectives.Experience with multi-modal AI models.Experience with common programming languages/packages such as Python, Matlab, TensorFlow/Pytorch, OpenCV, etc. Preferred Qualifications: Experience with high performance, cloud, and/or GPU computingExperience with robotics hardware and/or simulation such as ROS, Gazebo, etc.EducationPreferredMasters or betterLicenses & CertificationsPreferredNo ClearanceEqual Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Fort Loramie Employment Status: Salary Full-Time Function: Engineering Req ID:26163 SummaryLincoln Electric is seeking an Electrical Project Engineer to join our team at the Fort Loramie Automation site. This position plays a critical role in managing and executing the engineering processes that drive the design, development, production, and service of Lincoln Electric’s state-of-the-art automation equipment. At Lincoln Electric, we offer career growth potential along with a competitive compensation package, including bonus incentives, student loan repayment, tuition reimbursement, paid time off, paid holidays, a comprehensive benefits package (medical, dental, and vision), retirement plans, and much more.What You Will Do: As an Electrical Project Engineer, you will support the design and development of Lincoln Automation equipment for automotive, aerospace, appliance and energy industries. Your key responsibilities will include:Project Leadership & Coordination: Assist in defining project timelines, resource requirements, and staffing needs. Lead cross-functional teams, ensuring timely delivery of project milestones and adherence to financial targets (labor and material costs).Engineering Design & System Integration: Work closely with mechanical, electrical, pneumatic, and hydraulic engineers to drive the design of complex automation systems. Lead the creation and troubleshooting of control systems including PLC, Safety PLC, HMI, servo motion, and robot programming.Troubleshooting & Debugging: Guide teams in the development and resolution of issues. Oversee start-up, debugging, and final system maturation to ensure systems meet customer specifications and performance standards.Budget & Cost Management: Lead the effort in maintaining project budgets, ensuring efficient use of resources and alignment with financial expectations. Work with procurement teams to identify cost-effective suppliers and establish purchasing strategies.Onsite Support & Commissioning: Manage onsite installation activities, assist with equipment commissioning, and ensure successful system integration. Resolve any customer payment issues as required upon project completion.Documentation & Standardization: Coordinate compiling operator and maintenance manuals. Assist in developing and maintaining engineering and product standards to ensure consistency and high-quality deliverables. Ensure compliance with ISO documentation standards for projects.Team Development & Mentorship: Provide guidance and mentorship to junior engineers, ensuring their technical development. Assist in team performance evaluations, fostering a collaborative, high-performance culture.Education and Experience RequiredEducation: A technical degree in Electrical Engineering or a related field is highly desired.Experience: A minimum of 10+ years of hands-on experience in industrial automation design and engineering. Proven expertise in working with PLC/HMI systems, robot programming, control systems, network & fieldbus systems, and safety systems.Experience with electrical schematic creation and design using AutoCAD Electrical (preferred).Demonstrated leadership and project management experience, including working with machine builders, management teams, and cross-functional support functions.Ability to travel ~25%Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries.SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Are you ready to lead the development of next-generation airborne mission systems Join our SIL team where we are building a high-fidelity, full-replica integration lab to mirror and test one of the most advanced aircraft systems in the world. As a Lead Systems Engineer, you will work alongside a multidisciplinary team of engineers through the full systems engineering lifecycleincluding requirements development, architecture definition, system modeling, integration, and verification. You will play a key role in engaging with stakeholders, shaping system-level design and behavior through model-based engineering, and driving integration and test activities across a complex system-of-systems environment. Your leadership and technical vision will ensure the lab evolves in lockstep with the aircraft, enabling mission readiness and supporting rapid issue resolution throughout the program.Qualifications You Must Have:Bachelor's of Sciencedegree in System Engineering or relateddiscipline and typically 14 or more years of relevant experienceHigher education may substitute for relevant experienceDemonstrated knowledge of engineering principles and practices Progressive experience working in multi-disciplinary designand development teamsAdvanced understanding of requirements management, functional requirements parsing, derivation, and allocation; systems design, systems integration, technical risk identification and management strategies, and Verification and Validation (V&V) principlesSecret Level Clearance Is RequiredQualifications We Prefer:Experience with requirements management and system modelling tools, such as DOORS, Rhapsody, NoMagic, MATLABAdvanced Knowledge of industry-standard mechanical design principles, to include, but not limited to requirements management, Model Based System Engineering (MBSE)Experience or certification in INCOSE standardsBackgroundin the Aerospace and Defense IndustryProgressive experience leading baseline definition and maturation in a complex development setting, including the use of high impact trade studies and other measuresAbility to establish and track key Technical Performance Measurements (TPM)SNC offers annual incentive pay based upon performance that is commensurate with the level of the position.SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE:This position requires the ability to obtain and maintain a Top Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!SNC is an Equal Opportunity Employer committed to an environment free of discrimination.Employment decisions are made based on merit without regard to race, color, age, religion, sex, national origin, disability, status as a protected veteran or other characteristics protected by law.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!LocationAnna, OhioJob PurposeThe Electrical Controls Design role provides high quality, reasonably priced, on-time hardware, software, and safety design solutions to ensure stable new model and new technology introduction in all HDMA North American manufacturing facilities.Key AccountabilitiesWork in an engineering team atmosphere understand design requirements to create/modify automated production equipment.Provide electrical design to produce engineering hardware data to assemble/build, and wire a control system for production equipmentProvide electrical design to produce engineering software data to accomplish the control task for production equipment processes. (i.e. PLC, HMI, Motion Control, and Robotic programming).Provide on-site support to install, system up, and mature the control system for production equipment.Create and maintain a critical path schedule, determine resources, and manage resources to produce the control system design deliverables to achieve the overall project milestones for medium to large projects/ medium to high complexity.Provide direct mentorship to Associate Engineers in role on a 1:1 or 1:2 ratio where technical knowledge transfer occurs to foster growth in other individual contributorsProvide Project Leadership for equipment controls design for North America new model for an entire plant or new machine. Provide Plan versus actual reporting on QCDMS requirements and propose countermeasures to gaps encountered.Lead and attend design reviews to ensure design standards are achieved and design meets specification requirements for control system design deliverables for self and project team members. (peer reviews and mentee reviews)Qualifications, Experience, and Skills4-year Bachelor of Science degree in Electrical Engineering or 2-year Electrical related degree with 4 years’ experience.2-8 years in Electrical/Controls Engineering on automated production equipment. (depends on educational background)Knowledge of machine safety regulations. Knowledge of NEC/NFPA 79 standards. Servo position control experience. Robotic integration experience. Field I/O networking experience. Project management capabilities. Basic background in automated equipment electrical hardware/software design. Knowledge of PLC and HMI hardware and software functions.Workstyle75% Office environment - Design. 25% Manufacturing floor - Debug/Install.Must be willing to conduct physical confirmations in the manufacturing environment and conduct testing/debug on the manufacturing floor and/or at vendor sitesTravel up to 20% (North American Manufacturing Plants)Average work week is 45~48 hours (some weekends and 1 week shutdowns twice per year)What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeResponsible for leading casting die designs for North American mass production facilities with outputs in the form of 3D models and detailed drawings while working closely with customers and internal team members to ensure high quality parts and production stability.Key AccountabilitiesDesign new model casting tooling utilizing CAD software.Design business plan casting tooling utilizing CAD software.Implement customer specifications and request into new and existing casting dies.Investigate improvements or countermeasure tooling related problems during die builds and mass production.Create and coordinate design schedules then track the progress of design release.Lead and manage the design of multiple tooling projects.Investigate and implement business related improvement items.Investigate potential new model casting shapes and provide feedback to product designers.Qualifications, Experience, & SkillBachelor’s or Associate’s degree in Mechanical Engineering, Mechanical Engineering Technology, or similar.At least 3 months co-op experience.Familiarity with CAD software.Mechanical/manufacturing knowledge.Decisions ExpectedDetermine optimum tooling design considering SMEQCD (safety, morale, environmental, quality, cost and delivery) characteristics, manufacturing, and mass production stability.Conduct root cause analysis on issues found during development and/or trial activity and propose countermeasure and path forward.Working Conditions70% office environment: sitting for extended periods and working on PC equipment.20% manufacturing environment: PPE required at all times in manufacturing environment, standing for prolonged periods (up to 2hrs), occasionally lifting up to 40lbs, occasionally working inside casting machines, potential exposure to heat, occasional exposure to dust, oil or grease.Up to 10% travel required, including international (Japan, Canada, Mexico).What differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Fort Loramie Employment Status: Hourly Full-Time Function: Engineering Pay Range: $30.00 - $36.00 Target Bonus: 5.0% Req ID:26270 SummaryLincoln Electric Automation has an outstanding opportunity for a Mechanical Design Engineer. The Mechanical Design Engineer plays a key role supporting our team in the design, building, shipping, and service of Lincon Electric Automation products. A Mechanical Designer II typically works on one project at a time (typically creating new designs that are very close to reference designs) and is working under the direction of a Mechanical Designer or Project Engineer.In addition to competitive pay, Lincoln Electric offers an annual incentive plan, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoThe Mechanical Design Engineer will be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives with a focus on design and development. In addition you will:• Understand and gain knowledge needed to work in software systems. i.e. Solidworks • Provide mechanical layouts and details to production • Take initiative to meet challenging project timelines and budgets (hours and material) • Ensure required ISO documentation is completed • Assist in compiling electronic documentation for Service Manuals, updating design package to reflect status configuration of any critical item • Assure that product, as designed, is in conformance with quote and customer purchase order • Work well in a team environment and communication groups may include; Machine builders, Project Management, Engineering Teams, Management, and support functions • Provide small-scale mechanical layouts and detail prints to production • Assumes additional responsibilities and performs special projects in support of the Company’s 2025 Strategy • May support other roles as a cross-training opportunityEducation & Experience Requirements • Mechanical Engineer or Mechanical Engineering Technology degree required• 2 plus years of experience in manufacturing and design of industrial automated equipment desired • CAD (3D modeling) desired • Computer proficiency including spreadsheet, word processing and project softwareNonessential skills and experience: • Safety (OSHA STDS)Environmental, Health & Safety (EH&S): • Understand the Company’s EHS Policy and how it relates to this job • Be aware of OSHA & EPA laws and regulations as well as the Company’s Plant Rules and Regulations that pertain to this job • Work in a safe and environmentally friendly manner and observe all company EHS procedures • Know that the company EHS procedures are located on the ISO drive • Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures • Attend required EHS trainingPhysical demands and work environment: • Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. • Work environment: The noise level in the work environment is usually moderate.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries.SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Do you have an eye for detail and enjoy working with amazing products and tools Join us in championing and protecting explorers and heroes! As a Test Engineer at SNC, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.Must-haves:Bachelor's of Science degree in Engineering or other related discipline and typically14 or more years of experienceThorough understanding and ability to interpretengineering principles and practicesProgressive Experienceworking in multi-disciplinary designand development teamsAdvanced Knowledge of requirements management, system design,and systems integrationDemonstrated experience planning, conducting and documenting Verification and Validation (V&V) activitiesMust obtain and maintain a Second-Class FAA PhysicalThe ability to obtain and maintain a Top Secret U.S. Security Clearance is required Preferred:Experience with various testing equipment, standards, and methodologies to include manual and automated testingAbility to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirementsFamiliarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformancesExperience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniquesBackground in the Aerospace and Defense IndustrySNC offers annual incentive pay based upon performance that is commensurate with the level of the position.SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE:This position requires the ability to obtain and maintain a Top Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!SNC is an Equal Opportunity Employer committed to an environment free of discrimination.Employment decisions are made based on merit without regard to race, color, age, religion, sex, national origin, disability, status as a protected veteran or other characteristics protected by law.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeTo develop and guarantee the correct powertrain hardware package required to meet all developmental, marketability, and regulatory targets. To actively manage test and development schedules and data input from multiple departments and divisions across HDMA.Key AccountabilitiesStrategy: Gather the latest global hardware specs from 4MOC / ADC and compile a comprehensive plan for application to future, responsible development models.Advise: Work directly with all powertrain related function groups to guarantee harmonious hardware maturation schedules and lead critical meetings to resolve conflicts between competing groups / departmentsProblem Solving: Support investigation of hardware / calibration issues that come up during development and develop corrective hardware plans as necessaryCommunication: Clearly and concisely report the status of hardware / calibration maturation to both function management side as well as team sideAuthorize: Lead regular test data review meetings and MaruQ preparation events to validate the hardware and calibrations that are being applied to a development.Qualifications, Experience, and SkillsBS in Mechanical, Electrical, or Chemical Engineering or equivalent experience2+ years related experience based on educationProficient PC skills, including but not limited to excel, PowerPoint, and MatlabWorking ConditionsAssociate will work on the actual engine/vehicle with hand and power tools. Candidate can expect to spend a portion of their time working in the lab – confirming their systems on bench, on the car, or in thermal chambers. (20%)Associate will perform analysis and documentation, then communicate findings to varying levels of management. (80%)What differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeThrough Software and Calibration, the Systems & Drivability Engineer will support testing that contributes to the integration of the full powertrain meet Honda, consumer, and regulatory requirements.Key AccountabilitiesSchedule planning, management, & reporting: Based on assignments provided from direct supervisor, propose a completion plan and review it to ensure expectations and priority are properly understood. Plan daily work to achieve objectives, notifying direct supervisor in advance of risks to meet the deadline.Learn test process: Consult with direct supervisor to understand the scope and direction for testing / calibration assignments. Follow direct supervisor's advice on what to investigate and/or confirm. Complete all testing as instructed. Complete all required training for in-house software, calibration hardware, and vehicle / facility safety.System functionality interdependencies: Consult with direct supervisor or group experts to learn how to estimate potential impacts of design changes and calibration updates.Change point verification: Work with direct supervisor to learn the overall process and the specific role of the Test Engineer. Consult with group experts to determine the starting point, what should be verified and how it should be verified for assigned part based on the vehicle change points.Internal Collaboration: Communicate with your direct supervisor at the appropriate frequency to avoid becoming stuck or to avoid excessive rework due to too much time spent working toward the wrong direction. Communicate the status of assignments in the weekly group meeting. Share concerns with direct supervisor in monthly check in meetings.Document Creation, Reporting & Follow up: Under close guidance of direct supervisor, create documentation for assigned parts, report in evaluation events, and respond to any follow up items per requested deadline.Qualifications, Experience, and SkillsBS in Mechanical, Electrical, or Chemical Engineering or equivalent experience0-2 years related experience based on educationProficient PC skills, including but not limited to excel, PowerPoint, and MatlabWorking ConditionsAssociate will work on the actual vehicle with hand and power tools. Candidate can expect to spend a portion of their time working in the lab – confirming their systems on bench, on the car, or in thermal chambers. (50%)Associate will perform analysis and documentation, then communicate findings to varying levels of management. (50%)What differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeAs a Technical Expert in the CAE Methods Department, you will be responsible to lead a team and judge an entire technical area for CFD method and process creation related to areas such as vehicle aerodynamics, thermal management, and water management. Proficient use and understanding of CAE methods contributes to improved optimization, speed, and efficiency of our products and development processes.Key AccountabilitiesDirect and judge the technical output for a team that is developing and validating new CFD methods for both specification setting and product verification.Responsible to develop, promote, and evaluate metrics for quality of modeling and analysis.Lead, the establishment of a plan for the technical direction of CFD methods development that is aligned with the division and company direction. Communicate the plan to subordinates and management to ensure alignment.Collaborate with senior principal test and senior principal design engineers to ensure CFD models are achieving efficiency/effectiveness targets.Collaborate with Virtual Performance Engineering principal engineers to ensure the CFD methods are meeting the requirements for application to development projects.Create documentation for the registration of CFD Models as a verified tool for specification setting and product verification.Qualifications, Experience, and SkillsBachelor’s degree in Mechanical Engineering. Advanced degree preferred.BS and 10+ years engineering experience minimumExpertise with CFD software such as Fluent, OpenFoam, xFlow, PowerFlow, but preferably StarCCM+. Also expertise with programming language software such as Matlab, Python, and Excel VBAExpertise with creation of new CFD Methods and performing verification and validationAbility to present complex concepts as simple summariesExcellent communication and interpersonal skillsWorking ConditionsWork is primarily conducted at an office desk. Some time is spent at test facilities for collaborationHybrid (office/home) work is availableTravel and overtime are occasionally requiredWhat differentiates Honda and makes us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Regional Bonus (when applicable)Manager Lease Car Program (No Cost - Car, Maintenance, and Insurance included)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer MobilityEducation Reimbursement for Continued learningTraining and Development ProgramsAdditional Offerings:Lifestyle AccountChildcare Reimbursement AccountElder Care SupportTuition Assistance & Student Loan RepaymentWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeHonda Development and Manufacturing of America, LLC (HDMA)’s mission encompasses a commitment to innovation, sustainability, safety, and community engagement. HDMA aims to manufacture products that meet the highest standards of quality while continuously improving manufacturing processes and adopting eco-friendly technologies. The Outsourcing Manufacturing Vendor Support Sr Engineer (CL4-EX3) position for the Equipment Production department contributes to the overall mission of HDMA by providing front line mentorship of Vendor Technicians (mechanical/electrical) with critical Honda knowledge related to assembly of equipment, inspection procedures for equipment (Quality Gate), installation of equipment in Honda facilities, and project install schedule management. Other responsibilities include assessment of skills inventory of vendor technicians to determine the level of Honda support required to successfully integrate equipment into Honda facilities for future projects (KSI). The Outsourcing Manufacturing Vendor Support role further supports the HDMA mission by supplying project updates to management and internal cross functional teams and providing production and/or emergency support related to manufacturing/installation issues encountered during integration of equipment.Key Accountabilities• Responsible for project kickoff support and ensures program/project QIP processes, procedures, and standards are followed by outside suppliers. • Front Line Mentorship of Vendors from a (mechanical, electrical) manufacturing perspective to ensure all equipment quality, cost, and delivery targets are achieved. Responsibilities also include supporting vendors through key phases of the project: spec review, quotation, design, manufacturing, shipping evaluation, and supporting equipment installation at the Honda manufacturing facility. This will require being present at vendor facilities and at Honda manufacturing facilities throughout the project as needed. • Work with internal cross-functional teams and vendors to be able to communicate PEBU (mechanical, electrical) manufacturing standards and processes required to achieve equipment quality including supporting/reviewing manufacturing processes, providing technical support, sharing key references and benchmark practices, and support of long lead/Honda specific components• Monitor and update project schedules regularly to ensure trial dates and part delivery is achieved by supplier.• Lead tooling buyoff activity (T1, SEV, full turnkey) and ensure all checks have been completed and tooling has been built properly (heavy focus on craftsmanship).• Lead recurrence prevention activity when issues are identified between Honda and supplier (making necessary updates to processes and procedures as needed).• Hold weekly meetings with vendors base and discuss project content and communicate tooling/part concerns (provided through concern history process). • Travel to inspect tooling build/maturation quality at vendor manufacturing facilities on a regular basis. Mentor less experienced supplier development associates across categories.Qualifications, Experience, and SkillsRequired Work Experience:• 5+ years of relevant experience, ideally in manufacturing, and/or maturation methods for equipment manufacturing or relevant years of experience in Engineering/ProductionRequired Education:• Bachelor’s degree in engineering or equivalent work experience.Desired Skills:• Mechanical/manufacturing experience• Ability to multi-task and set short, medium, and long-term priorities.• MS Office, Communication – Public Speaking/Presentation skills, Problem solving and decision making, & Interaction with executive level management. TQM style analysis and problem-solving skills.Additional Position Factors:• 50% Office environment | 50% Manufacturing floor• Travel Domestically 15% | Internationally 10%• Work week between 45~50 hoursJob DimensionsDecisions ExpectedWorking ConditionsHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeThe CASE Vehicle Network Controls Test Engineer III role contributes directly to Honda’s Connected, Autonomous, Shared, Electric (CASE) goals. At Engineer III Career Level, the Engineer is capable of taking charge and leadingelectronics development of Vehicle Network (VN) Electronic Control Unit (ECU) systems with minimal oversight, utilizing their past experience to overcome challenges of moderate complexity. VN ECU assignments may include avariety of ECUs controlling both vehicle functions and CAN & Ethernet network management functions covering development, integration and test of embedded software for VN ECUs. VN ECU development also includesdevelopment of functionality related to Over-The-Air (OTA) software updates and cybersecurity protection mechanisms.Key AccountabilitiesProject and team management: Breaking down project concept details into required development activities and deciding the overall VN ECU development plan, correlatingtechnical project details with key stakeholders and negotiating the schedule for deliverables. Informing and confirming details with technical leadership as required.Engineering specification design for VN ECU integration applications, including electrical circuit hardware and software in tools such as MATLAB Simulink or MS VISIO. Decidingthe best implementation for converting design concepts into requirements and functional specifications, then conducting design reviews with technical leadership. May lead otherengineers on project-specific complex implementations and best practices.Engineering troubleshooting, root cause analysis and solution design: Working hands-on in prototype or mass production level vehicles to identify VN ECU or communication networkfunctional issues and deciding the steps required for resolution.Testing and verification of VN ECU specifications related to hardware and software: Performing testing in prototype or mass production level vehicles related to electromagneticcompatibility (EMC) or verification of technical change points to ensure proper electrical functional performance, quality and reliability. Accountable to create testresult reports and conduct verification reviews with technical leadership.Improvement and innovation: May lead small groups of engineers on specific investigationsof new processes or technologies which improve communication network system performance, development capability or efficiency. Includes making project proposals tomanagement, setting direction for the best implementation and accountability to report progress on technical activity, budget and schedule.Cyber security requirement analysis and implementation verification: Work together with cyber security specialists to understand the security requirements needed for VN ECUapplications, create and verify related specifications and work with VN ECU suppliers on implementations.Qualifications, Experience, and SkillsBachelor’s Degree in Electrical Engineering or related field; and/or equivalent experience3+ years of relevant experience in related field to automotive ECU or communication network developmentCoordination of other person’s job priorities.Able to perform development activities of VN ECU systems, including ECUs controlling both vehicle functions and CAN & Ethernet network management functions covering development, integration and test of embedded software for VN ECUs.Able to use industry standard engineering tools such as Vector CANalyzer or ETAS INCA.Working ConditionsRemove/Install electrical components in a test vehicle, sometimes involving difficult physical access.Driving vehicles for testing purposes, sometimes in extreme cold or hot climates (-30degC to 50degC)Periodic domestic and international travel to test facilities, factories, suppliers. (Overtime is expected in moderate amount, to meet deadlines. (~5hr/wk average)Remote work up to 60% based on business conditions, on-site vehicle testing is a required elementHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeManage all aspects in the development of accessory components from plan definition through first article inspection to achieve defined QCD targets. Coordinate with key suppliers and the CBU development team to achieve the desired innovation and integration level of accessory parts.Key AccountabilitiesSupport Planning in establishing an Accessory Line Up to drive unit sales & maximize profit. Provide basic ideas to support strategic plans to identify new accessories and roll out timing across modelsCollaborate with suppliers to ensure accessory designs meet predetermined cost targetsCoordinate with the development team to meet accessory integration and implementation targets to achieve integrated appearance and installation easeCreate and manage schedule of individual & supplier work to ensure deadlines are met. Consistently communicate project status and participate or lead project meetings, discussions, and development events.Collaborate with suppliers to ensure accessory parts meet design intent, vehicle fitment, packaging requirements and part quality. Collaborate with technical leadership to ensure accessory test criteria is met.Ensure installation instructions are completed on time for product release.Generate high level ideas for shortcomings in existing processes, systems and procedures. Contribute to building strategies to evolve process and part technologies.Qualifications, Experience, and SkillsMinimum Educational QualificationsBachelors Engineering Degree in related field or related equivalent experience.Minimum Experience5+ years engineering experience preferably in Powersports or Automotive fieldOther Job-Specific SkillsStrong leadership, coaching and mentoring skillsAbility to interact/communicate effectively with staff/managementMust be able to operate with high level of confidentialityCompetent in 3D Modeling, drawings, and technical dataCompetent analytical, problem solving, judgement, decision-making and prioritization skillsCompetent in creating a plan and scheduleCompetent in understand product development schedulesMicrosoft Office tools (Word, Excel and Power Point)WorkstyleHybrid workstyle 60% in office / 40% remote or as management definesTravel: Average 1- 2 times per month to suppliers and/or test locations depending on project demandsPhysical: Combination of desk work for keyboarding and phone conferences and mechanical work for accessory installation and/or parts inspectionHazards: May be exposed to hazardous chemicals & equipment, including off road riding/drivingOvertime: Overtime expected based on project demands/responsibilitiesMaintains professional conduct and follows all departmental, safety DEPARTMENT, and COMPANY policies, Procedures, AND rules.What differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeAs a senior member of the Advanced CAE Department, you will be responsible to lead 1D CAE model and method creation related to electrical systems like wire harness and electrical control units in order to verify voltage drop and electrical load-balance as well as electrical device performance and power consumption. Proficient use of CAE contributes to improved optimization, speed, and efficiency of our products and development processes.Key AccountabilitiesLead a small team to develop and validate new CAE methods for both specification setting and product verification.Lead collaboration and negotiation with test and part design engineers to understand the physical part and test procedures in order to accurately set the CAE model boundaries, constraints, and assumptions. Effectively present analysis and information to technical experts.Create documentation for the registration of CAE Models as a verified tool for specification setting and product verification.Qualifications, Experience, and SkillsBS in mechanical or electrical engineering. Advanced degree preferred.BS and 6+ years engineering experience minimum. MS and 3+ years engineering experience or PhD and 0-2 years engineering experience.Expertise with 1D CAE such as Matlab/Simulink/Simscape, Ansys Twin Builder, Amesim. Also proficient with programming language software such as Python, and VBA.Extensive experience with creation of new CAE Models/Methods including performing verification and validationMust possess familiarity with static and dynamic electrical analysisAbility to break down complex concepts into simple summariesExcellent communication and interpersonal skillsWorking ConditionsWork is primarily conducted at an office desk. Some time is spent at test facilities for collaboration.Travel and overtime are occasionally requiredWhat differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!LocationMarysville, OhioJob PurposeWork as part of a multi-discipline team to introduce and implement equipment required for new model introduction into Honda facilities. By leveraging 3D CAD software and simulation tools, they will need to identify key change points and summarize into a specification that fixes design requirements. This individual will be asked to drive forward projects and activity as functional Project Leader, PIC, or Subject Matter Expert, from inception through the handoff to final design/assy. They will be asked to focus on characteristic improvements, which align with the Business Unit strategy and regional goals. They will be asked to collaborate with the design team and plant members in order to achieve required quality, cost, and safety criteria.Key AccountabilitiesDevelopment of optimal machine concepts for any process characteristic change; by utilizing fundamentally sound engineering principlesProvides technical support of equipment/process and the ability to feed/indirectly support the Project Leadership function. Support correlation with external functions (ex. external suppliers or plant resources)Functionally act as direct project leaders for small/midsized business plan projects, driving forward the project from an engineering perspectivePerform detailed process studies of new model car part to understand machine capability, feeding back issues to car part designers as needed.Creation of Specification/Scope of work documentation to summarize changepoints, establish criteria and process/part flowOnline support during the installation phase of the project, linked to verifying spec criteriaCreate and maintain a critical path schedule to maintain overall project milestonesQualifications, Experience, and SkillsBachelor’s degree in Mechanical Engineering, or Industrial Engineering or equivalent work experienceMinimum 3 years of relevant experienceKnowledge of 3D CAD systems and softwareBackground in automated equipment developmentExcellent technical communication skills (both written and oral)Workstyle85% Office environment – creation of specification documentation. 15% Manufacturing floor – direct line side investigation / system-up support / verification at any Honda facilityMust be willing to travel locally, regional, and internationally as required on a project basis (to Honda facilities or external equipment vendors).What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.