Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801Employment Status: Hourly Full-TimeFunction: ManufacturingReq ID: 26723 SummaryLincoln Electric has a terrific opportunity for a CAD Drafter supporting our Cleveland, Ohio headquarters. The CAD Drafter will play a key role in supporting drafting needs for the Plant Engineering Department and implementation of AutoCAD within the group. This is an outstanding opportunity to join a global leader in its industry. In addition to career growth potential, Lincoln Electric offers competitive pay with a lucrative annual profit sharing incentive, student loan repayment, tuition reimbursement, paid time off/paid holidays, retirement, medical/dental/vision and much more!What You Will DoPlant Engineering implements capital projects and provides engineering support for the Consumable and Machine divisions of the Cleveland Operations. The CAD Drafter is responsible for the following:• Support Plant Engineers with creation and/or modifying drawings.• Support Maintenance by modifying drawings that require updates.• Support Common Services, Fabrication, and Construction with drawings.• Document existing production and facility equipment• Maintain and update drawings• Assist the CAD Administrator in the development and maintenance of templates, and standard parts library.• Assist the CAD Administrator in training CAD user and developing training content.• Assumes additional responsibilities as needed or directed in support of the Company’s 2026 Strategy.Summary• Minimum of a High School Diploma or GED.• 1 - 2 or more years relative experience.• Technically proficient in using software applications such as MS Office, etc.• Ability to effectively apply all drafting standards, practices, and procedures.• Uncompromising attitude towards quality.• Must be organized and pay attention to details.• Self-motivated with a high level of commitment; able to work independently and as a team player.• Good interpersonal, verbal, and written communication skills.• Perform in a fast-paced environment on multiple assignments.• Selected candidate’s Job Level and Pay Grade will be determined based upon qualifications and experience.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Cargill is a trusted salt supplier to a wide variety of industries; our portfolio includes food processing salts, sodium reduction solutions, salt for water softeners and swimming pools, bulk and packaged ice melters, industrial salts, and salt for animal feeding. Working at Cargill is an opportunity to thrive – a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! We depend on creative, responsible, hardworking individuals like you to operate our business successfully!Job Type: Full TimeShift Available:2ndCompensation: $34.01/hr in the first 90 days, then $37.01/hr after the 90 daysA Typical Work Day May Include:Completing preventative, predictive, and reactive industrial maintenance throughout the facility Documenting all completed work and the conditions found; utilizing maintenance computer software as necessaryInstalling, maintaining, testing, evaluating, and repairing various components and systems including heavy mobile equipment, hydraulic systems, 12 & 24V mobile electrical systems, belt conveyors, gear reducers, and bearingsOperating standard maintenance tools such as power tools, basic hand tools, pneumatic tools, electric tools, etc.Comprehending mechanical/electrical schematics, blueprints, and/or operation manualsOperating forkliftsUnderstanding and adhering to all safety policies and proceduresMaintaining a safe and clean work environmentAbility to repair equipment in close proximity to explosivesOther duties as assignedWhat You Will Need: Must be eligible to work in the United States without visa sponsorshipMust be 18 years or olderBasic computer skillsAbility to understand and communicate in English (verbal/written)Basic math skills including addition, subtraction, multiplication, and divisionAbility to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodationAbility to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of Personal Protective Equipment (PPE)Ability to work in elevated areas (4 feet and above)Minimum of one year of experience with industrial electrical knowledge and mechanical maintenance tradesAbility to work overtime including weekends, holidays, or different shifts with advance noticeAbility and willingness to work underground in a mining environmentMust receive a passing score on a Standardized Ramsay Test in order to be selected for an interviewWhat Will Put You Ahead:Must possess journeyman certificate, a state certificate, or a degree in the field of electrical with experience repairing and troubleshooting electrical systemsExperience with SAP or a Computerized Maintenance Management System (CMMS)Certified Maintenance Reliability Technician (CMRT) or willing to acquire certificationHeavy equipment/industrial maintenance technical diploma from a trade school, or 3 years equivalent experiencePredictive Maintenance and/or Precision Maintenance CertificationsHigh school diploma/GED or a minimum of two years equivalent work experienceExperience troubleshooting and maintaining various components and systems such as but not limited to packaging equipment, hydraulic & pneumatic systems, belt or roller conveyors, pumps, gear reducers, or bearings Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/Vet.To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Quality Assurance/Control Pay Range: ($42,224.00- $63,336.00) Target Bonus: % Req ID:26469 SummarySummaryLincoln Electric has an outstanding opportunity for a Quality Assurance Technician supporting our Cleveland, Ohio manufacturing operation (headquarters). The Quality Assurance Technician will play a key role in supporting quality checks and other quality related tasks for the consumable division. In addition to career growth potential, Lincoln Electric offers competitive pay with a lucrative annual profit-sharing incentive, student loan repayment, tuition reimbursement. paid time off/paid holidays, retirement, medical/dental/vision and much more!What You Will DoThe Quality Assurance Technician provides technical support to engineers and scientists in areas such as production, operations, maintenance, safety, testing, process improvement or product development. In addition:Gathers, maintains, formats, compiles and manipulates technical data using established formulae and procedures and performs detailed mathematical calculations.Must have an uncompromising attitude towards quality.Must thoroughly understand, enforce and follow the Lincoln Electric Quality Management System as it applies to all daily activities.Encouraged to initiate changes for continuous product and process improvement.Maintain manufacturing quality performance metrics and/or quality records.Assist with the evaluation, proper identification, and disposition of all non-conforming items and materials.Be aware of all products, documents, and process changes in your area of responsibility which affect quality.Utilize the Quality Management System and appropriate divisional personnel to support or drive Continuous ImprovementAssist in the training and performance feedback of production personnel to production supervision.Develop and perform random process and product audits.Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience RequirementsLevel II: Vocational Training & 3+ years of related experience or, GED with 5+ years in related field.Level III: Vocational Training & 5+ years of related experience or, Associates Degree in related field or, High School Diploma or equivalent & 7+years of experience in related field.Experience workingwith a limited degree of supervision, with oversight focused only on complex new assignments.Ability to act as an informal resource for colleagues with less experienceAbility to work rotating shifts.Demonstrated computer skills in MS Office and Windows operating system.Knowledge and understanding of divisional products & related processes.Basic knowledge of Lean principles, 5S, quality assurance tools, procedures, measurement techniquesAbility to develop and maintain records and to follow projects through to conclusion.Excellent oral, written communication and people skillsExcellent organizational skills to handle a constantly changing set of priorities with minimal supervision.Capable of frequent standing, walking, and lifting up to 60 lbs.PreferredCompletion of Lincoln Electric 6 Sigma Gray Belt online training or direct equivalent is highly desirable.Additional technical training in the Quality Assurance field or Root Cause Analysis is highly desirable.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Cargill is a trusted salt supplier to a wide variety of industries; our portfolio includes food processing salts, sodium reduction solutions, salt for water softeners and swimming pools, bulk and packaged ice melters, industrial salts, and salt for animal feeding. Working at Cargill is an opportunity to thrive – a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! We depend on creative, responsible, hardworking individuals like you to operate our business successfully!Job Type: Full TimeShift(s) Available: Weekend Shift Friday – Monday 6am – 4:30pm and 3rd shift 10:30pm - 7amCompensation: $34.01/hr in the first 90 days, then $37.01/hr after the 90 daysBenefitsMedical, Dental, Vision, and PrescriptionDrug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Tuition ReimbursementEmployee DiscountsPrincipal AccountabilitiesCompleting preventative, predictive, and reactive industrial electrical work throughout the facilityDocumenting all completed work and the conditions found, utilizing maintenance computer software as necessaryInstalling, maintaining, testing, evaluating, and repairing various electrical components and systems including low voltage automation systems, medium voltage motor control circuits, and high voltage (Comprehending mechanical/electrical schematics, blueprints, and/or operation manualsUnderstanding and adhering to all safety policies and proceduresMaintaining a safe and clean work environmentAbility to repair equipment in close proximity to explosivesRequired QualificationsMust be eligible to work in the United States without visa sponsorshipMust be 18 years or olderAbility to understand and communicate in English (verbal/written)Basic computer skillsAbility to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodationAbility to work in elevated areas (4 feet and above)Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of Personal Protective Equipment (PPE)Minimum of one year experience troubleshooting and maintaining various electrical components and systems (low, medium, or high voltage)Ability to work underground in a mining environmentCurrent ATF certification or the ability to obtain one upon hireAbility to work overtime including weekends, holidays, or different shifts with advance noticePreferred QualificationsExperience with SAP or a Computerized Maintenance Management System (CMMS)Certified Maintenance Reliability Technician (CMRT) or willing to acquire certificationHeavy equipment/industrial maintenance technical diploma from a trade school, or 3 years equivalent experiencePredictive Maintenance and/or Precision Maintenance CertificationsExperience with high voltage (High school diploma/GED or two-year equivalent work experienceImportant note: Eligible candidates must receive a passing score on a Ramsay standarized test.Routine background check and Alcohol Tobacco and Firearm (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check.Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/Vet.To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Manufacturing Req ID:26400 PURPOSE: Plant Engineering is the department within Lincoln Electric which is responsible for designing, maintaining, improving, and supporting the equipment, manufacturing processes, and plant-wide infrastructure. Past Plant Engineers have worked to create the operations as we know it today.As a Plant Engineer, you will play a pivotal role in supporting and executing projects across our manufacturing facilities in the Cleveland and Mentor areas. Your focus will be on identifying and solving technical challenges while ensuring that all equipment and processes align with the organization’s safety, health, quality, and productivity standards. This role offers an exciting opportunity to contribute to the sustainability and growth of our operations.JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES) • Collaborate in a team environment to execute capital projects for manufacturing facilities in the Cleveland and Mentor areas. • Take responsibility for the mechanical aspects of projects, which may include design, documentation, equipment installation, project management, and support. • Develop engineering solutions to improve equipment reliability and safety, reduce operating and maintenance costs, and effectively manage outage risks. • Create and maintain sustainable documentation for use by engineering and maintenance teams. • Design solutions that comply with ISO 14001 and Environmental Health and Safety (EHS) initiatives to enhance environmental and employee health and safety standards. • Provide capital cost estimates and establish project timelines to ensure successful completion of project work. • Specify and solicit equipment quotations to confirm compliance with desired specifications. • Deliver technical support to the Production and Maintenance departments. • Coordinate and interface with process engineering, production, maintenance, and supply management teams. • Work closely with and often manage outside engineering and construction personnel. • Ensure all safety, health, environmental, and compliance requirements adhere to the appropriate regulations. • Perform additional responsibilities as assigned by managers within the Plant Engineering department. • Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Job Requirements• Bachelor’s degree in Mechanical Engineering with a minimum of 3 years for level II and minimum 5 years of experience for level III. • Strong desire to take ownership of tasks and deliver results. • Excellent problem-solving and troubleshooting abilities. • Demonstrates good judgment, self-motivation, and a commitment to safety. • Proven ability to manage multiple tasks, prioritize work effectively, and meet deadlines. • Flexibility to handle diverse assignments and adapt to changing priorities. • Ability to perform hands-on work when needed and work collaboratively on the shop floor with employees and processes. • Technically proficient in CAD modeling. Preferred systems: Solid Edge; AutoCAD. • Willingness to occasionally work off shifts, travel between facilities in Northeast Ohio, and travel as required.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Research & Development Req ID:26380 SummaryLincoln Electric has an outstanding opportunity for a Pilot Plant Technician. The Pilot Plant Technician plays in integral role in supporting our consumable product development and certification through prototype production and routine product performance evaluations using established procedures and work practices. Report to Consumable R&D Managers or their designees.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will Do• Manufactures small batches of experimental welding consumable products, provides feedback on manufacturability to engineers and scientists • Provides technical support to engineers and scientists in areas such as operations, maintenance, safety, testing, process improvement or product development. • Gathers, maintains, formats, compiles and manipulates technical data using established formulas and procedures and performs detailed mathematical calculations. • Conducts and documents a variety of standardized tests; prepares routine test specimens using established procedures and/or drawings; sets up and operates standard test equipment; records test data • Responsible for executing work in accordance with instructions provided • Performs additional tasks as required by engineers or supervisor • Responsible for the safe operation, cleanliness and routine maintenance of all assigned laboratory equipment • Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience Requirements• Vocational Training and 5+ years’ experience required; or Associates Degree in related field; or High School Diploma (or equivalent) and 7+ years’ experience in related field. • Has working knowledge and skills to perform a defined set of analytical/scientific methods or operational processes; Mechanical Aptitude a plus • Applies experience and skills to complete assigned work within own area of expertise • Works within standard operating procedures and/or scientific methods • Works with a moderate degree of supervision • Demonstrated ability to follow detailed instructions and maintain neat, accurate records • Proven ability to work independently and as a part of a team with minimal supervision • Ability to develop a positive and cooperative work environment with colleagues and supervisors • Excellent communication skills, both verbal and written• Ability to lift up to 60 lbs. on a regular basisLincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mentor Employment Status: Salary Full-Time Function: Manufacturing Req ID:26336 Job ResponsibilitiesLincoln Electric has an outstanding opportunity for an experienced Plant Engineer. Plant Engineering is the department within Lincoln Electric which is responsible for designing, maintaining, improving, and supporting the equipment, manufacturing processes, and plant-wide infrastructure. Past Plant Engineers have worked to create the operations as we know it today.As a Plant Engineer, you will play a pivotal role in supporting and executing projects across our manufacturing facilities in the Cleveland and Mentor areas. Your focus will be on identifying and solving technical challenges while ensuring that all equipment and processes align with the organization’s safety, health, quality, and productivity standards. This role offers an exciting opportunity to contribute to the sustainability and growth of our operations.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will Do• Collaborate in a team environment to execute capital projects for manufacturing facilities in the Cleveland and Mentor areas. • Take responsibility for the mechanical aspects of projects, which may include design, documentation, equipment installation, project management, and support. • Develop engineering solutions to improve equipment reliability and safety, reduce operating and maintenance costs, and effectively manage outage risks. • Create and maintain sustainable documentation for use by engineering and maintenance teams. • Design solutions that comply with ISO 14001 and Environmental Health and Safety (EHS) initiatives to enhance environmental and employee health and safety standards. • Provide capital cost estimates and establish project timelines to ensure successful completion of project work. • Specify and solicit equipment quotations to confirm compliance with desired specifications. • Deliver technical support to the Production and Maintenance departments. • Coordinate and interface with process engineering, production, maintenance, and supply management teams. • Work closely with and often manage outside engineering and construction personnel. • Ensure all safety, health, environmental, and compliance requirements adhere to the appropriate regulations. • Perform additional responsibilities as assigned by managers within the Plant Engineering department. • Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience Requirements• Bachelor’s degree in Mechanical Engineering with a minimum of 3 years of experience. • Strong desire to take ownership of tasks and deliver results. • Excellent problem-solving and troubleshooting abilities. • Demonstrates good judgment, self-motivation, and a commitment to safety. • Proven ability to manage multiple tasks, prioritize work effectively, and meet deadlines. • Flexibility to handle diverse assignments and adapt to changing priorities. • Ability to perform hands-on work when needed and work collaboratively on the shop floor with employees and processes. • Technically proficient in CAD modeling. Preferred systems: Solid Edge; AutoCAD. • Willingness to occasionally work off shifts, travel between facilities in Northeast Ohio, and travel as required.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mentor Employment Status: Salary Full-Time Function: Manufacturing Req ID:26334 SummaryLincoln Electric has a terrific opportunity for a Plant Mechanical Engineering Technologist supporting our Cleveland operation. The Plant Mechanical Engineering Technologist supports the department within Lincoln Electric which is responsible for designing, maintaining, improving, and supporting the equipment, manufacturing processes, and plant-wide infrastructure. Past Plant Engineers have worked to create the operations as we know it today.As a Plant Technologist, you will play a pivotal role in supporting and executing projects across our manufacturing facilities in the Cleveland and Mentor areas. Your focus will be on identifying and solving technical challenges while ensuring that all equipment and processes align with the organization’s safety, health, quality, and productivity standards. This role offers an exciting opportunity to contribute to the sustainability and growth of our operations.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will Do• Collaborate in a team environment to execute capital projects for manufacturing facilities in the Cleveland and Mentor areas. • Take responsibility for the mechanical aspects of projects, which may include documentation, equipment installation, project management, and support. • Implement engineering solutions to improve equipment reliability and safety, reduce operating and maintenance costs, and effectively manage outage risks. • Create and maintain sustainable documentation for use by engineering and maintenance teams. • Implement solutions that comply with ISO 14001 and Environmental Health and Safety (EHS) initiatives to enhance environmental and employee health and safety standards. • Provide capital cost estimates and establish project timelines to ensure successful completion of project work. • Review equipment quotations to confirm compliance with desired specifications. • Deliver technical support to the Production and Maintenance departments. • Coordinate and interface with engineering, production, maintenance, and supply management teams. • Work closely with and often manage outside engineering and construction personnel. • Ensure all safety, health, environmental, and compliance requirements adhere to the appropriate regulations. • Provide support for various tasks as directed by Plant Engineering managers to ensure efficient operations. • Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience Requirements• Bachelor’s degree in Engineering Technology (Mechanical) with a minimum of 3 years of experience, OR • Associate's degree in related fields with 5 years of experience, OR • High school diploma/GED with 10 years of relevant experienceAdditional requirements include:• Strong desire to take ownership of tasks and deliver results. • Excellent problem-solving and troubleshooting abilities. • Demonstrates good judgment, self-motivation, and a commitment to safety. • Proven ability to manage multiple tasks, prioritize work effectively, and meet deadlines. • Flexibility to handle diverse assignments and adapt to changing priorities. • Ability to perform hands-on work when needed and work collaboratively on the shop floor with employees and processes. • Technically proficient in CAD modeling. Preferred systems: Solid Edge; AutoCAD. • Willingness to occasionally work off shifts, travel between facilities in Northeast Ohio, and travel as required.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801Employment Status: Hourly Full-TimeFunction: ManufacturingReq ID: 26825 SummaryLincoln Electric has an outstanding opportunity for a Manufacturing R&D Technician. This role will provide key supporrt to Lincoln's Commercial Engine Drive group working on multiple innovative projects. The R&D Technician will assist R&D engineers in new product development. In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoAs an R&D Technician, you you will provide key technical support to engineers and scientists in areas such as production, operations, maintenance, safety, testing, process improvement or product development. In addition, the R&D Technician has responsibility for the following:Uses schematics, diagrams, written and verbal descriptions or defined plans to perform testing and troubleshooting on electronic or mechanical components, equipment or systems. Gathers, maintains, formats, compiles and manipulates technical data using established formulae and procedures and performs detailed mathematical calculations.Work in Machine R&D laboratory assisting multiple projects in the design, construction, and testing of welding products.Use data acquisition system, computers, and CAD as required.Assist in the preparation of documentation.Operate basic lab equipment including meters, oscilloscopes, temperature recorders, etc. (Training provided as needed).Perform other duties assigned by the supervisor.Experience and Education RequirementsVocational training and 5+ years of experience in a relevant work environment is required; or High School Diploma/GED with 7+ years experience in a relevant work environment.Knowledge of analytical/scientific methods or operational processesExperience in a similar environment where safety consciousness is a priority.Ability to organize and maintain a neat work area.Able to maintain detailed test records.Ability to work on multiple projects with supervision and clear instruction.Familiarity with MS Windows and programs.Ability to use common laboratory equipment.Ability to read and comprehend wiring diagrams, schematics and test specifications.Capable of lifting 60 pounds on an occasional basis.Good hands-on assembly and troubleshooting skills, electronic experience is a plus.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Req ID:26070 Job ResponsibilitiesPURPOSE: The primary function of a Paint Technician is to provide process documentation, process support and routine maintenance on both powder and liquid paint systems as well as wash systems. This includes creating and maintaining process documentation, resolving issues that arise, driving continuous improvement, and sustaining the system. The successful candidate will collaborate between operations, maintenance, and other departments as needed to provide a sustainable paint and wash processes that meets all specifications, while driving improvements in safety, quality and productivity. JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES): • Supervises and performs maintenance and cleaning of the paint and wash systems at predetermined intervals including wash system, paint booth, environmental room, wastewater treatment, filter changes, and other critical items to maintain the required performance of the systems and product specifications. • Drains, refills, and recharges wash, chemical, and rinse tanks on a predetermined schedule. • Recharges dosing tanks when low. • Perform titrations to check concentrations of chemical tanks and make necessary adjustments if needed. • Calibrate conductivity, PH, and other meters at specified intervals. • Determine and maintain optimal wash nozzle and paint gun positioning and settings. • Ensure climate control settings (temperature, fan settings, and humidity where applicable) are maintained throughout the systems including but not limited to the wash, powder paint environmental rooms, cure ovens and cool down chambers. • Change out and manage chemicals which includes making sure the containers are properly cleaned prior to disposal. • Runs paint test panels as required by engineering for quality and reliability testing. • Perform oven profiling periodically as specified by engineering. • Manage start up and shut down of the systems. • Maintain and create process instructions for painting and washing parts such as loading and unloading parts, paint color changes, system operation and maintenance, and any other pertinent documentation. • Monitor waste water treatment system. • Other assignments as assigned by the manager.Job RequirementsBASIC REQUIREMENTS:• Minimum 5 years of experience with wash systems, powder paint, and liquid paint systems or 7 years of experience in related field with high school diploma or GED. • Able to troubleshoot and solve manufacturing problems. Attention to detail when needed. • Excellent ability and experience reading and calibrating gages and meters. • Experience working with chemicals, measuring, and mixing them to achieve the initial desired concentrations and to maintain concentrations. • Possess a comprehensive understanding of wash and paint systems with demonstrated performance in the job of maintaining and sustaining them. Must be able to lift 50 lbs. • Ability to work independently or as part of a team. • Very good organizational skills as well as written and oral communication skills. • Ability to handle a variety of assignments and changing priorities. • Good computer skills with ability to effectively use Microsoft Excel, Word, and Power Point. • Ability to work effectively and efficiently independently, cross functionally, or part of a team. • Excellent safety / quality mindset. • Ability to be effective working with shop floor employees and to adjust work schedules at times if needed. • Able to perform hands on work as required. • Able to gather and analyze data to make good fact based decisions.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.