Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

***$5,000 Sign on Bonus***Clean HarborsCleveland, OHis looking for aMobile Vehicle Mechanicto join their safety conscious team!This position will be responsible for routine maintenance, inspections, and repairing of all company fleet at branch locations throughout the area.Why work for Clean Harbors Health and Safety is our #1 priority, and we live it 3-6-5!Competitive wages (Hourly rate $25-$32 based on experience)Opportunity for increase after 90 days!!!Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching component.Opportunities for growth and development for all the stages of your careerGenerous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and toolingAccess to company paid OEM certifications and trainings!Speak with a recruiter today to learn more!!Key Responsibilities:Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times.Correct all equipment deficiencies and perform preventative maintenance on company owned equipment as directed by management.Ability to perform thorough inspection of equipment and identify unsatisfactory condition.Full compliance with mandatory PPE requirements during all work-related activities and tasksTravel to other locations to perform repairs and maintenance on equipment as required.Completes and submits all associated paperwork as required for tracking PM schedules.Maintain active light duty or DQ driver status as per mobile vehicle type.Performs other duties and tasks as assigned from time to time by management.What does it take to work for Clean Harbors High School diploma or equivalent required.Valid driver's license and clean driving record.1+ years prior experience working on heavy duty-trucks and equipment.1+ years DOT inspection experience required.Must be able to provide own basic tools.Willingness to travel within assigned territory up to 70%.Attention to detail.Strong communication skills.Ability to work flexible shifts including nights, weekends, and overtime as required.Ability to determine vehicle condition by conducting inspections, scheduled PM's and diagnostic tests; identifying worn and damaged parts & replacement as needed.Ability to pass a background, drug, and physical test upon hire.40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us.Join our safety focused team today!To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/.Clean Harbors is an equal opportunity employer.Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-.Clean Harbors and its subsidiaries are a Military & Veteran friendly company.“2022 Top Company for Women to Work for in Transportation”*CH#LI-DP2RESPONSIBILITIESQUALIFICATIONS

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($49,192.00- $76,232.00) Target Bonus: % Req ID:26995 PurposeTo assist R&D engineers in new product development.Job Duties and ResponsibilitiesProvides technical support to engineers and scientists in areas such as production, operations, maintenance, safety, testing, process improvement or product development.Uses schematics, diagrams, written and verbal descriptions or defined plans to perform testing and troubleshooting on electronic or mechanical components, equipment or systems.Gathers, maintains, formats, compiles and manipulates technical data using established formulae and procedures and performs detailed mathematical calculations.Work in Machine R&D laboratory assisting multiple projects in the design, construction, and testing of welding products.Use data acquisition system, computers, and CAD as required. Assist in the preparation of documentation.Operate basic lab equipment including meters, oscilloscopes, temperature recorders, etc. (Training provided as needed).Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Job RequirementsTechnician III: Vocational training and 5+ years of experience in a relevant work environment is required; or High School Diploma/GED with 7+ years experience in a relevant work environment.Technician IV: Vocational Training and 8+ years experience required; or GED with 10+ years in related field. (but does not require a university degree).Has working knowledge and skills to perform a defined set of analytical/scientific methods or operational processes.Applies experience and skills to complete assigned work within own area of expertise.Works within standard operating procedures and/or scientific methods.Highly motivated, quick to learn, and safety conscious.Ability to organize and maintain a neat work area.Able to maintain detailed test records.Ability to work on multiple projects with supervision and clear instruction.Familiarity with personal computers using the Windows® operating system.Ability to use common laboratory equipment.Ability to read and comprehend wiring diagrams, schematics and test specifications.Capable of lifting50 pounds on an occasional basis.Good hands-on assembly and troubleshooting skills.Electrical/electronic experience is a plus.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Starting at $16.50 per hour! As a Fricker’s kitchen team member you will get to work in a fun, fast-paced environment. Whether you’re saucing wings, grilling ribs, or prepping food for a busy weekend, your skills are critical in providing the mouth-watering food our guests are craving! Your job responsibilities include: Following proper food safety and sanitation proceduresFollowing recipes and cooking procedures to ensure quality products are servedKeeping the restaurant clean and safeWorking as a teamCommunicating with managers and front of house staffWorking in fast-paced, stressful environment and maintaining a positive attitude What you can expect from us: We will present you with the knowledge and skills needed to be successful.We will constantly coach, teach and train you for your continued development.We will provide honest, professional feedback on your performance. What we expect from you: A positive attitude.To be in your proper uniform and looking sharp every shift.To be flexible when necessary.Continued effort towards your own development.To follow company policies and procedures.To be yourself and have FUN!! Perks and Benefits Flexible work scheduleMeal and clothingdiscountsFree pair of Shoes for Crews on your anniversaryFree Birthday meal for you and your familyHoliday PayRewards ProgramReferral ProgramCareer growth opportunitiesHealthcare and prescription options for eligible employees Additional Information Must be 18+ years oldMust have reliable transportationMust be able to work various shiftsMust be authorized to work in the United States Do you think you have what it takes to work at the home of Fun, Food, Sports and Spirits If you do, click “Apply Now” and maybe you can be a part of our Frickin’ Team! Thank you for your interest in applying with Fricker’s. We are always looking for great people and appreciate you taking the time to complete our application. If there are currently no immediate hiring needs, we will keep your information on file for future opportunities and contact qualified applicants at that time. Again, thank you for your time. #FRKJOBS2BehaviorsPreferredLeader: Inspires teammates to follow themDedicated: Devoted to a task or purpose with loyalty or integrityTeam Player: Works well as a member of a groupMotivationsPreferredJob Security: Inspired to perform well by the knowledge that your job is safePeer Recognition: Inspired to perform well by the praise of coworkersGrowth Opportunities: Inspired to perform well by the chance to take on more responsibilityEqual Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Become a Tech Today! HelloTech is a nationwide, on-demand tech support platform.HelloTech provides affordable, same-day, on-site tech support services such as installations, setups, troubleshooting and repairs.Our goal is to make technology accessible to everyone andit all starts with you! This position is an independent contractor role. The opportunities available to technicians that choose to use our platform are matched based on your chosen availability and the demand in your area. Our independent contractor Techs are located nationwide and have the flexibility and freedom to set their own schedules and choose which jobsthey accept based on their skill sets and other personal factors. Why Become a Technician Set Your Own Schedule-Be your own boss and work whenever you want. Select the jobs that fit your schedule and skill-setGet Paid Weekly -Techs average $100+ per job. Add skills to your profile to increase your weekly earningsJoin the Community -Grow your skill-set and network while bettering people's lives through tech The Role: As a Technician, you will provide on-site user support for customers in need of helpwith their various technology devices and systems. You will be able to select from a range of jobs such as: TV MountingComputer/Printer/Networking SupportHome Theater InstallationSmart Home InstallationIn-Wall Cable Running Requirements: Understanding of various technology devices, including installation, set up and securityGreat attitude and enjoy helping people!Car/transportation requiredMust be at least 18 years of age In a HelloTech Home,Technology Just Works

R&D Machinist/Tool and Die MakerLooking for a new opportunity Are you innovative, good at troubleshooting and interested in developing new and improved containers Then this opportunity is for you!As an R&D Machinist or Tool and Die Maker, in the Medina Packaging Development Center you will set up and operate a variety of machine tools to produce Extrusion tooling, Blow molds and Blow molding tooling, precision parts and instruments. May also fabricate and modify parts to make or repair machine tools, Quality equipment, Production tooling, and apply knowledge of mechanics, shop mathematics, metal properties, layout, and machining procedures.We Offer Career Development: Participate in the development of innovative and market-leading plastic containers. Gain experience in an R&D setting while growing your mechanical skillsets!Stability & Growth: We follow a strong promote-from-within business practice and offer a stable job through current market uncertainty!Comfort: Our food-grade facility is exceptionally clean & climate-controlled!Consistent Schedule: 1st Shift Monday – Friday OT available throughout the week and on SaturdaysYou WillCNC program editing required, program creation required using MasterCamStudies specifications such as blueprints, sketches, models, or descriptions, and visualizes product to determine materials required and machines to be used to fabricate parts.Calculate dimensions and tolerances using knowledge of mathematics and measuring instruments.Measures, marks, and scribes dimensions and reference points on metal stock for machining.Sets up and operates machine tools such as manual lathes, milling machines and grinders, to machine parts, and verifies conformance of machined parts to specifications. CNC Milling machines like the Haas, Fadal, Hermle and DMU as well as CNC Lathes like the Haas, Okuma Howa and Mori Seiki.Monitor the feed and speed of machines during the machining process, making adjustments as necessary.Measure, examine, and test completed units in order to detect defects and ensure conformance to specifications, using precision instruments such as micrometers, indicators, gauge blocks, Starrett CMM machine, Mitutoyo Quick Scope and Optical Comparator.You HaveHigh School Diploma, GED or equivalent with 3+ years working experience; Journeyman’s or equivalent preferred.Should have good communication skills; be detail-oriented, adaptable, cooperative and able to work as part of a team.Working knowledge of extrusion or blow molding equipment a plusAs a Plastipak Associate, you receive a benefits package offering the following:Wellness ProgramsHealth Insurance Coverage, including Medical, Dental & VisionEAP, Employee Assistance ProgramLife InsuranceAccidental Death & Dismemberment InsuranceDisability Insurance: Short-Term & Long-TermAccidental InsuranceCritical Illness InsuranceHospital Indemnity Insurance401(k) Plan, with Company Matching Contribution & Profit Sharing featurePaid Time Off - 80 hours within 1st year & subsequent increasesPaid Company HolidaysDependent Care Flexible Spending AccountCaregiving via Care.comPet InsuranceTuition Assistance ProgramSons and Daughters Scholarship ProgramTravel AssistanceEmployee Discount Programs*Some benefits are subject to eligibility requirementsPlastipak is an Equal Opportunity EmployerIn order to process your job application, Plastipak collects and stores the personal information that you submit via this website. Please refer to Plastipak’s Privacy Policy to understand how Plastipak uses and protects the information that you provide.

Maintenance Supervisor - 1st Shift Air Power Dynamics (APD) is part of the Consolidated Precision Products family of companies - located in Mentor, Ohio. APD has been supplying pattern assembly for the Investment Casting Industry for more than 18 years. APD offers competitive compensation and a benefits package which includes a bonus program that is paid quarterly, medical/dental/vision/ life insurance, 401k with match, paid vacation and holidays. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements below are representative of some of the knowledge, skill, and/or ability required. This position requires previous leadership experience in a fast-paced manufacturing environment. Also, must have experience troubleshooting and repairing equipment. This is a first shift position but will be on-call for issues that may arise on 2nd shift or on the weekend. PRIMARY RESPONSIBILITIES Supervises the inspection, maintenance, repair, installation, and cleaning of company assets; including, but not limited to building infrastructure, interior utilities, interior electrical, air conditioning, machinery, equipment, and other assets identified by Air Power Dynamics.Acts as liaison to public utility, environmental, and energy agencies.Requisitions tools, equipment, and supplies.Interprets company policies to workers and enforces safety regulations.Schedules Preventive Maintenance. SUPERVISORY RESPONSIBILITIES Directly supervises employees in the Maintenance Department in accordance with the organization’s policies and applicable laws Responsibilities include interviewing, training, and providing assignments.Maintains and plans firm’s HVAC systems, computer network wiring, lighting, and other factors and upgrades per needs.Appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.Inspects completed work for conformance to blueprints, specifications, and standards.Ensures that employees are wearing safety PPE when and where required. EDUCATION and/or EXPERIENCE One year certificate from college or technical school; or three to six years related experience and/or training; or equivalent combination of education and experience. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to sit, climb, or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly- engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ CPP Corporation is an Equal Opportunity Employer that recruits, hires, train, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran’s status, or other legally protected status. This is a full time position

Cargill is a trusted salt supplier to a wide variety of industries; our portfolio includes food processing salts, sodium reduction solutions, salt for water softeners and swimming pools, bulk and packaged ice melters, industrial salts, and salt for animal feeding. Working at Cargill is an opportunity to thrive – a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! We depend on creative, responsible, hardworking individuals like you to operate our business successfully!Job Type: Full TimeShift Available:2ndCompensation: $34.01/hr in the first 90 days, then $37.01/hr after the 90 daysA Typical Work Day May Include:Completing preventative, predictive, and reactive industrial maintenance throughout the facility Documenting all completed work and the conditions found; utilizing maintenance computer software as necessaryInstalling, maintaining, testing, evaluating, and repairing various components and systems including heavy mobile equipment, hydraulic systems, 12 & 24V mobile electrical systems, belt conveyors, gear reducers, and bearingsOperating standard maintenance tools such as power tools, basic hand tools, pneumatic tools, electric tools, etc.Comprehending mechanical/electrical schematics, blueprints, and/or operation manualsOperating forkliftsUnderstanding and adhering to all safety policies and proceduresMaintaining a safe and clean work environmentAbility to repair equipment in close proximity to explosivesOther duties as assignedWhat You Will Need: Must be eligible to work in the United States without visa sponsorshipMust be 18 years or olderBasic computer skillsAbility to understand and communicate in English (verbal/written)Basic math skills including addition, subtraction, multiplication, and divisionAbility to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodationAbility to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of Personal Protective Equipment (PPE)Ability to work in elevated areas (4 feet and above)Minimum of one year of experience with industrial electrical knowledge and mechanical maintenance tradesAbility to work overtime including weekends, holidays, or different shifts with advance noticeAbility and willingness to work underground in a mining environmentMust receive a passing score on a Standardized Ramsay Test in order to be selected for an interviewWhat Will Put You Ahead:Must possess journeyman certificate, a state certificate, or a degree in the field of electrical with experience repairing and troubleshooting electrical systemsExperience with SAP or a Computerized Maintenance Management System (CMMS)Certified Maintenance Reliability Technician (CMRT) or willing to acquire certificationHeavy equipment/industrial maintenance technical diploma from a trade school, or 3 years equivalent experiencePredictive Maintenance and/or Precision Maintenance CertificationsHigh school diploma/GED or a minimum of two years equivalent work experienceExperience troubleshooting and maintaining various components and systems such as but not limited to packaging equipment, hydraulic & pneumatic systems, belt or roller conveyors, pumps, gear reducers, or bearings Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/Vet.To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801Employment Status: Hourly Full-TimeFunction: ManufacturingReq ID: 26723 SummaryLincoln Electric has a terrific opportunity for a CAD Drafter supporting our Cleveland, Ohio headquarters. The CAD Drafter will play a key role in supporting drafting needs for the Plant Engineering Department and implementation of AutoCAD within the group. This is an outstanding opportunity to join a global leader in its industry. In addition to career growth potential, Lincoln Electric offers competitive pay with a lucrative annual profit sharing incentive, student loan repayment, tuition reimbursement, paid time off/paid holidays, retirement, medical/dental/vision and much more!What You Will DoPlant Engineering implements capital projects and provides engineering support for the Consumable and Machine divisions of the Cleveland Operations. The CAD Drafter is responsible for the following:• Support Plant Engineers with creation and/or modifying drawings.• Support Maintenance by modifying drawings that require updates.• Support Common Services, Fabrication, and Construction with drawings.• Document existing production and facility equipment• Maintain and update drawings• Assist the CAD Administrator in the development and maintenance of templates, and standard parts library.• Assist the CAD Administrator in training CAD user and developing training content.• Assumes additional responsibilities as needed or directed in support of the Company’s 2026 Strategy.Summary• Minimum of a High School Diploma or GED.• 1 - 2 or more years relative experience.• Technically proficient in using software applications such as MS Office, etc.• Ability to effectively apply all drafting standards, practices, and procedures.• Uncompromising attitude towards quality.• Must be organized and pay attention to details.• Self-motivated with a high level of commitment; able to work independently and as a team player.• Good interpersonal, verbal, and written communication skills.• Perform in a fast-paced environment on multiple assignments.• Selected candidate’s Job Level and Pay Grade will be determined based upon qualifications and experience.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Become a Tech Today! HelloTech is a nationwide, on-demand tech support platform.HelloTech provides affordable, same-day, on-site tech support services such as installations, setups, troubleshooting and repairs.Our goal is to make technology accessible to everyone andit all starts with you! This position is an independent contractor role. The opportunities available to technicians that choose to use our platform are matched based on your chosen availability and the demand in your area. Our independent contractor Techs are located nationwide and have the flexibility and freedom to set their own schedules and choose which jobsthey accept based on their skill sets and other personal factors. Why Become a Technician Set Your Own Schedule-Be your own boss and work whenever you want. Select the jobs that fit your schedule and skill-setGet Paid Weekly -Techs average $100+ per job. Add skills to your profile to increase your weekly earningsJoin the Community -Grow your skill-set and network while bettering people's lives through tech The Role: As a Technician, you will provide on-site user support for customers in need of helpwith their various technology devices and systems. You will be able to select from a range of jobs such as: TV MountingComputer/Printer/Networking SupportHome Theater InstallationSmart Home InstallationIn-Wall Cable Running Requirements: Understanding of various technology devices, including installation, set up and securityGreat attitude and enjoy helping people!Car/transportation requiredMust be at least 18 years of age In a HelloTech Home,Technology Just Works

Cargill is a trusted salt supplier to a wide variety of industries; our portfolio includes food processing salts, sodium reduction solutions, salt for water softeners and swimming pools, bulk and packaged ice melters, industrial salts, and salt for animal feeding. Working at Cargill is an opportunity to thrive – a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! We depend on creative, responsible, hardworking individuals like you to operate our business successfully!Job Type: Full TimeShift(s) Available: Weekend Shift Friday – Monday 6am – 4:30pm and 3rd shift 10:30pm - 7amCompensation: $34.01/hr in the first 90 days, then $37.01/hr after the 90 daysBenefitsMedical, Dental, Vision, and PrescriptionDrug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Tuition ReimbursementEmployee DiscountsPrincipal AccountabilitiesCompleting preventative, predictive, and reactive industrial electrical work throughout the facilityDocumenting all completed work and the conditions found, utilizing maintenance computer software as necessaryInstalling, maintaining, testing, evaluating, and repairing various electrical components and systems including low voltage automation systems, medium voltage motor control circuits, and high voltage (Comprehending mechanical/electrical schematics, blueprints, and/or operation manualsUnderstanding and adhering to all safety policies and proceduresMaintaining a safe and clean work environmentAbility to repair equipment in close proximity to explosivesRequired QualificationsMust be eligible to work in the United States without visa sponsorshipMust be 18 years or olderAbility to understand and communicate in English (verbal/written)Basic computer skillsAbility to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodationAbility to work in elevated areas (4 feet and above)Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of Personal Protective Equipment (PPE)Minimum of one year experience troubleshooting and maintaining various electrical components and systems (low, medium, or high voltage)Ability to work underground in a mining environmentCurrent ATF certification or the ability to obtain one upon hireAbility to work overtime including weekends, holidays, or different shifts with advance noticePreferred QualificationsExperience with SAP or a Computerized Maintenance Management System (CMMS)Certified Maintenance Reliability Technician (CMRT) or willing to acquire certificationHeavy equipment/industrial maintenance technical diploma from a trade school, or 3 years equivalent experiencePredictive Maintenance and/or Precision Maintenance CertificationsExperience with high voltage (High school diploma/GED or two-year equivalent work experienceImportant note: Eligible candidates must receive a passing score on a Ramsay standarized test.Routine background check and Alcohol Tobacco and Firearm (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check.Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/Vet.To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Quality Assurance/Control Pay Range: ($42,224.00- $63,336.00) Target Bonus: % Req ID:26469 SummarySummaryLincoln Electric has an outstanding opportunity for a Quality Assurance Technician supporting our Cleveland, Ohio manufacturing operation (headquarters). The Quality Assurance Technician will play a key role in supporting quality checks and other quality related tasks for the consumable division. In addition to career growth potential, Lincoln Electric offers competitive pay with a lucrative annual profit-sharing incentive, student loan repayment, tuition reimbursement. paid time off/paid holidays, retirement, medical/dental/vision and much more!What You Will DoThe Quality Assurance Technician provides technical support to engineers and scientists in areas such as production, operations, maintenance, safety, testing, process improvement or product development. In addition:Gathers, maintains, formats, compiles and manipulates technical data using established formulae and procedures and performs detailed mathematical calculations.Must have an uncompromising attitude towards quality.Must thoroughly understand, enforce and follow the Lincoln Electric Quality Management System as it applies to all daily activities.Encouraged to initiate changes for continuous product and process improvement.Maintain manufacturing quality performance metrics and/or quality records.Assist with the evaluation, proper identification, and disposition of all non-conforming items and materials.Be aware of all products, documents, and process changes in your area of responsibility which affect quality.Utilize the Quality Management System and appropriate divisional personnel to support or drive Continuous ImprovementAssist in the training and performance feedback of production personnel to production supervision.Develop and perform random process and product audits.Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience RequirementsLevel II: Vocational Training & 3+ years of related experience or, GED with 5+ years in related field.Level III: Vocational Training & 5+ years of related experience or, Associates Degree in related field or, High School Diploma or equivalent & 7+years of experience in related field.Experience workingwith a limited degree of supervision, with oversight focused only on complex new assignments.Ability to act as an informal resource for colleagues with less experienceAbility to work rotating shifts.Demonstrated computer skills in MS Office and Windows operating system.Knowledge and understanding of divisional products & related processes.Basic knowledge of Lean principles, 5S, quality assurance tools, procedures, measurement techniquesAbility to develop and maintain records and to follow projects through to conclusion.Excellent oral, written communication and people skillsExcellent organizational skills to handle a constantly changing set of priorities with minimal supervision.Capable of frequent standing, walking, and lifting up to 60 lbs.PreferredCompletion of Lincoln Electric 6 Sigma Gray Belt online training or direct equivalent is highly desirable.Additional technical training in the Quality Assurance field or Root Cause Analysis is highly desirable.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Become a Tech Today! HelloTech is a nationwide, on-demand tech support platform.HelloTech provides affordable, same-day, on-site tech support services such as installations, setups, troubleshooting and repairs.Our goal is to make technology accessible to everyone andit all starts with you! This position is an independent contractor role. The opportunities available to technicians that choose to use our platform are matched based on your chosen availability and the demand in your area. Our independent contractor Techs are located nationwide and have the flexibility and freedom to set their own schedules and choose which jobsthey accept based on their skill sets and other personal factors. Why Become a Technician Set Your Own Schedule-Be your own boss and work whenever you want. Select the jobs that fit your schedule and skill-setGet Paid Weekly -Techs average $100+ per job. Add skills to your profile to increase your weekly earningsJoin the Community -Grow your skill-set and network while bettering people's lives through tech The Role: As a Technician, you will provide on-site user support for customers in need of helpwith their various technology devices and systems. You will be able to select from a range of jobs such as: TV MountingComputer/Printer/Networking SupportHome Theater InstallationSmart Home InstallationIn-Wall Cable Running Requirements: Understanding of various technology devices, including installation, set up and securityGreat attitude and enjoy helping people!Car/transportation requiredMust be at least 18 years of age In a HelloTech Home,Technology Just Works

Cargill is a trusted salt supplier to a wide variety of industries; our portfolio includes food processing salts, sodium reduction solutions, salt for water softeners and swimming pools, bulk and packaged ice melters, industrial salts, and salt for animal feeding. Working at Cargill is an opportunity to thrive – a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! We depend on creative, responsible, hardworking individuals like you to operate our business successfully!Job Type: Full TimeShift(s) Available: 2ndCompensation: $34.01/hr in the first 90 days, then $37.01/hr after the 90 daysBenefitsMedical, Dental, Vision, and PrescriptionDrug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Tuition ReimbursementEmployee DiscountsPrincipal AccountabilitiesCompleting preventative, predictive, and reactive industrial electrical work throughout the facilityDocumenting all completed work and the conditions found, utilizing maintenance computer software as necessaryInstalling, maintaining, testing, evaluating, and repairing various electrical components and systems including low voltage automation systems, medium voltage motor control circuits, and high voltage (Comprehending mechanical/electrical schematics, blueprints, and/or operation manualsUnderstanding and adhering to all safety policies and proceduresMaintaining a safe and clean work environmentAbility to repair equipment in close proximity to explosivesOther duties as assignedRequired QualificationsMust be eligible to work in the United States without visa sponsorshipMust be 18 years or olderAbility to understand and communicate in English (verbal/written)Basic computer skillsAbility to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodationAbility to work in elevated areas (4 feet and above)Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of Personal Protective Equipment (PPE)Minimum of one year experience troubleshooting and maintaining various electrical components and systems (low, medium, or high voltage)Ability to work underground in a mining environmentCurrent ATF certification or the ability to obtain one upon hireAbility to work overtime including weekends, holidays, or different shifts with advance noticePreferred QualificationsExperience with SAP or a Computerized Maintenance Management System (CMMS)Certified Maintenance Reliability Technician (CMRT) or willing to acquire certificationHeavy equipment/industrial maintenance technical diploma from a trade school, or 3 years equivalent experiencePredictive Maintenance and/or Precision Maintenance CertificationsExperience with high voltage (High school diploma/GED or two-year equivalent work experienceImportant note: Eligible candidates must receive a passing score on a Ramsay standarized test.Routine background check and Alcohol Tobacco and Firearm (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check.Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/VetTo apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Manufacturing Req ID:26400 PURPOSE: Plant Engineering is the department within Lincoln Electric which is responsible for designing, maintaining, improving, and supporting the equipment, manufacturing processes, and plant-wide infrastructure. Past Plant Engineers have worked to create the operations as we know it today.As a Plant Engineer, you will play a pivotal role in supporting and executing projects across our manufacturing facilities in the Cleveland and Mentor areas. Your focus will be on identifying and solving technical challenges while ensuring that all equipment and processes align with the organization’s safety, health, quality, and productivity standards. This role offers an exciting opportunity to contribute to the sustainability and growth of our operations.JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES) • Collaborate in a team environment to execute capital projects for manufacturing facilities in the Cleveland and Mentor areas. • Take responsibility for the mechanical aspects of projects, which may include design, documentation, equipment installation, project management, and support. • Develop engineering solutions to improve equipment reliability and safety, reduce operating and maintenance costs, and effectively manage outage risks. • Create and maintain sustainable documentation for use by engineering and maintenance teams. • Design solutions that comply with ISO 14001 and Environmental Health and Safety (EHS) initiatives to enhance environmental and employee health and safety standards. • Provide capital cost estimates and establish project timelines to ensure successful completion of project work. • Specify and solicit equipment quotations to confirm compliance with desired specifications. • Deliver technical support to the Production and Maintenance departments. • Coordinate and interface with process engineering, production, maintenance, and supply management teams. • Work closely with and often manage outside engineering and construction personnel. • Ensure all safety, health, environmental, and compliance requirements adhere to the appropriate regulations. • Perform additional responsibilities as assigned by managers within the Plant Engineering department. • Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Job Requirements• Bachelor’s degree in Mechanical Engineering with a minimum of 3 years for level II and minimum 5 years of experience for level III. • Strong desire to take ownership of tasks and deliver results. • Excellent problem-solving and troubleshooting abilities. • Demonstrates good judgment, self-motivation, and a commitment to safety. • Proven ability to manage multiple tasks, prioritize work effectively, and meet deadlines. • Flexibility to handle diverse assignments and adapt to changing priorities. • Ability to perform hands-on work when needed and work collaboratively on the shop floor with employees and processes. • Technically proficient in CAD modeling. Preferred systems: Solid Edge; AutoCAD. • Willingness to occasionally work off shifts, travel between facilities in Northeast Ohio, and travel as required.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Become a Tech Today! HelloTech is a nationwide, on-demand tech support platform.HelloTech provides affordable, same-day, on-site tech support services such as installations, setups, troubleshooting and repairs.Our goal is to make technology accessible to everyone andit all starts with you! This position is an independent contractor role. The opportunities available to technicians that choose to use our platform are matched based on your chosen availability and the demand in your area. Our independent contractor Techs are located nationwide and have the flexibility and freedom to set their own schedules and choose which jobsthey accept based on their skill sets and other personal factors. Why Become a Technician Set Your Own Schedule-Be your own boss and work whenever you want. Select the jobs that fit your schedule and skill-setGet Paid Weekly -Techs average $100+ per job. Add skills to your profile to increase your weekly earningsJoin the Community -Grow your skill-set and network while bettering people's lives through tech The Role: As a Technician, you will provide on-site user support for customers in need of helpwith their various technology devices and systems. You will be able to select from a range of jobs such as: TV MountingComputer/Printer/Networking SupportHome Theater InstallationSmart Home InstallationIn-Wall Cable Running Requirements: Understanding of various technology devices, including installation, set up and securityGreat attitude and enjoy helping people!Car/transportation requiredMust be at least 18 years of age In a HelloTech Home,Technology Just Works

Cargill is a trusted salt supplier to a wide variety of industries; our portfolio includes food processing salts, sodium reduction solutions, salt for water softeners and swimming pools, bulk and packaged ice melters, industrial salts, and salt for animal feeding. Working at Cargill is an opportunity to thrive – a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! We depend on creative, responsible, hardworking individuals like you to operate our business successfully!Job Type: Full TimeShift(s) Available: 2ndCompensation: $34.01/hr in the first 90 days, then $37.01/hr after the 90 daysBenefitsMedical, Dental, Vision, and PrescriptionDrug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Tuition ReimbursementEmployee DiscountsPrincipal AccountabilitiesCompleting preventative, predictive, and reactive industrial electrical work throughout the facilityDocumenting all completed work and the conditions found, utilizing maintenance computer software as necessaryInstalling, maintaining, testing, evaluating, and repairing various electrical components and systems including low voltage automation systems, medium voltage motor control circuits, and high voltage (Comprehending mechanical/electrical schematics, blueprints, and/or operation manualsUnderstanding and adhering to all safety policies and proceduresMaintaining a safe and clean work environmentAbility to repair equipment in close proximity to explosivesOther duties as assignedRequired QualificationsMust be eligible to work in the United States without visa sponsorshipMust be 18 years or olderAbility to understand and communicate in English (verbal/written)Basic computer skillsAbility to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodationAbility to work in elevated areas (4 feet and above)Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of Personal Protective Equipment (PPE)Minimum of one year experience troubleshooting and maintaining various electrical components and systems (low, medium, or high voltage)Ability to work underground in a mining environmentCurrent ATF certification or the ability to obtain one upon hireAbility to work overtime including weekends, holidays, or different shifts with advance noticePreferred QualificationsExperience with SAP or a Computerized Maintenance Management System (CMMS)Certified Maintenance Reliability Technician (CMRT) or willing to acquire certificationHeavy equipment/industrial maintenance technical diploma from a trade school, or 3 years equivalent experiencePredictive Maintenance and/or Precision Maintenance CertificationsExperience with high voltage (High school diploma/GED or two-year equivalent work experienceImportant note: Eligible candidates must receive a passing score on a Ramsay standarized test.Routine background check and Alcohol Tobacco and Firearm (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check.Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/VetTo apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Research & Development Req ID:26380 SummaryLincoln Electric has an outstanding opportunity for a Pilot Plant Technician. The Pilot Plant Technician plays in integral role in supporting our consumable product development and certification through prototype production and routine product performance evaluations using established procedures and work practices. Report to Consumable R&D Managers or their designees.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will Do• Manufactures small batches of experimental welding consumable products, provides feedback on manufacturability to engineers and scientists • Provides technical support to engineers and scientists in areas such as operations, maintenance, safety, testing, process improvement or product development. • Gathers, maintains, formats, compiles and manipulates technical data using established formulas and procedures and performs detailed mathematical calculations. • Conducts and documents a variety of standardized tests; prepares routine test specimens using established procedures and/or drawings; sets up and operates standard test equipment; records test data • Responsible for executing work in accordance with instructions provided • Performs additional tasks as required by engineers or supervisor • Responsible for the safe operation, cleanliness and routine maintenance of all assigned laboratory equipment • Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience Requirements• Vocational Training and 5+ years’ experience required; or Associates Degree in related field; or High School Diploma (or equivalent) and 7+ years’ experience in related field. • Has working knowledge and skills to perform a defined set of analytical/scientific methods or operational processes; Mechanical Aptitude a plus • Applies experience and skills to complete assigned work within own area of expertise • Works within standard operating procedures and/or scientific methods • Works with a moderate degree of supervision • Demonstrated ability to follow detailed instructions and maintain neat, accurate records • Proven ability to work independently and as a part of a team with minimal supervision • Ability to develop a positive and cooperative work environment with colleagues and supervisors • Excellent communication skills, both verbal and written• Ability to lift up to 60 lbs. on a regular basisLincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Cargill is a trusted salt supplier to a wide variety of industries; our portfolio includes food processing salts, sodium reduction solutions, salt for water softeners and swimming pools, bulk and packaged ice melters, industrial salts, and salt for animal feeding. Working at Cargill is an opportunity to thrive – a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! We depend on creative, responsible, hardworking individuals like you to operate our business successfully!Job Type: Full TimeShift(s) Available: 2ndCompensation: $34.01/hr in the first 90 days, then $37.01/hr after the 90 daysBenefitsMedical, Dental, Vision, and PrescriptionDrug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Tuition ReimbursementEmployee DiscountsPrincipal AccountabilitiesCompleting preventative, predictive, and reactive industrial electrical work throughout the facilityDocumenting all completed work and the conditions found, utilizing maintenance computer software as necessaryInstalling, maintaining, testing, evaluating, and repairing various electrical components and systems including low voltage automation systems, medium voltage motor control circuits, and high voltage (Comprehending mechanical/electrical schematics, blueprints, and/or operation manualsUnderstanding and adhering to all safety policies and proceduresMaintaining a safe and clean work environmentAbility to repair equipment in close proximity to explosivesOther duties as assignedRequired QualificationsMust be eligible to work in the United States without visa sponsorshipMust be 18 years or olderAbility to understand and communicate in English (verbal/written)Basic computer skillsAbility to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodationAbility to work in elevated areas (4 feet and above)Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of Personal Protective Equipment (PPE)Minimum of one year experience troubleshooting and maintaining various electrical components and systems (low, medium, or high voltage)Ability to work underground in a mining environmentCurrent ATF certification or the ability to obtain one upon hireAbility to work overtime including weekends, holidays, or different shifts with advance noticePreferred QualificationsExperience with SAP or a Computerized Maintenance Management System (CMMS)Certified Maintenance Reliability Technician (CMRT) or willing to acquire certificationHeavy equipment/industrial maintenance technical diploma from a trade school, or 3 years equivalent experiencePredictive Maintenance and/or Precision Maintenance CertificationsExperience with high voltage (High school diploma/GED or two-year equivalent work experienceImportant note: Eligible candidates must receive a passing score on a Ramsay standarized test.Routine background check and Alcohol Tobacco and Firearm (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check.Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/VetTo apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mentor Employment Status: Salary Full-Time Function: Manufacturing Req ID:26336 Job ResponsibilitiesLincoln Electric has an outstanding opportunity for an experienced Plant Engineer. Plant Engineering is the department within Lincoln Electric which is responsible for designing, maintaining, improving, and supporting the equipment, manufacturing processes, and plant-wide infrastructure. Past Plant Engineers have worked to create the operations as we know it today.As a Plant Engineer, you will play a pivotal role in supporting and executing projects across our manufacturing facilities in the Cleveland and Mentor areas. Your focus will be on identifying and solving technical challenges while ensuring that all equipment and processes align with the organization’s safety, health, quality, and productivity standards. This role offers an exciting opportunity to contribute to the sustainability and growth of our operations.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will Do• Collaborate in a team environment to execute capital projects for manufacturing facilities in the Cleveland and Mentor areas. • Take responsibility for the mechanical aspects of projects, which may include design, documentation, equipment installation, project management, and support. • Develop engineering solutions to improve equipment reliability and safety, reduce operating and maintenance costs, and effectively manage outage risks. • Create and maintain sustainable documentation for use by engineering and maintenance teams. • Design solutions that comply with ISO 14001 and Environmental Health and Safety (EHS) initiatives to enhance environmental and employee health and safety standards. • Provide capital cost estimates and establish project timelines to ensure successful completion of project work. • Specify and solicit equipment quotations to confirm compliance with desired specifications. • Deliver technical support to the Production and Maintenance departments. • Coordinate and interface with process engineering, production, maintenance, and supply management teams. • Work closely with and often manage outside engineering and construction personnel. • Ensure all safety, health, environmental, and compliance requirements adhere to the appropriate regulations. • Perform additional responsibilities as assigned by managers within the Plant Engineering department. • Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience Requirements• Bachelor’s degree in Mechanical Engineering with a minimum of 3 years of experience. • Strong desire to take ownership of tasks and deliver results. • Excellent problem-solving and troubleshooting abilities. • Demonstrates good judgment, self-motivation, and a commitment to safety. • Proven ability to manage multiple tasks, prioritize work effectively, and meet deadlines. • Flexibility to handle diverse assignments and adapt to changing priorities. • Ability to perform hands-on work when needed and work collaboratively on the shop floor with employees and processes. • Technically proficient in CAD modeling. Preferred systems: Solid Edge; AutoCAD. • Willingness to occasionally work off shifts, travel between facilities in Northeast Ohio, and travel as required.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Cargill is a trusted salt supplier to a wide variety of industries; our portfolio includes food processing salts, sodium reduction solutions, salt for water softeners and swimming pools, bulk and packaged ice melters, industrial salts, and salt for animal feeding. Working at Cargill is an opportunity to thrive – a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! We depend on creative, responsible, hardworking individuals like you to operate our business successfully!Job Type: Full TimeShift(s) Available: 2ndCompensation: $34.01/hr in the first 90 days, then $37.01/hr after the 90 daysBenefitsMedical, Dental, Vision, and PrescriptionDrug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Tuition ReimbursementEmployee DiscountsPrincipal AccountabilitiesCompleting preventative, predictive, and reactive industrial electrical work throughout the facilityDocumenting all completed work and the conditions found, utilizing maintenance computer software as necessaryInstalling, maintaining, testing, evaluating, and repairing various electrical components and systems including low voltage automation systems, medium voltage motor control circuits, and high voltage (Comprehending mechanical/electrical schematics, blueprints, and/or operation manualsUnderstanding and adhering to all safety policies and proceduresMaintaining a safe and clean work environmentAbility to repair equipment in close proximity to explosivesOther duties as assignedRequired QualificationsMust be eligible to work in the United States without visa sponsorshipMust be 18 years or olderAbility to understand and communicate in English (verbal/written)Basic computer skillsAbility to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodationAbility to work in elevated areas (4 feet and above)Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of Personal Protective Equipment (PPE)Minimum of one year experience troubleshooting and maintaining various electrical components and systems (low, medium, or high voltage)Ability to work underground in a mining environmentCurrent ATF certification or the ability to obtain one upon hireAbility to work overtime including weekends, holidays, or different shifts with advance noticePreferred QualificationsExperience with SAP or a Computerized Maintenance Management System (CMMS)Certified Maintenance Reliability Technician (CMRT) or willing to acquire certificationHeavy equipment/industrial maintenance technical diploma from a trade school, or 3 years equivalent experiencePredictive Maintenance and/or Precision Maintenance CertificationsExperience with high voltage (High school diploma/GED or two-year equivalent work experienceImportant note: Eligible candidates must receive a passing score on a Ramsay standarized test.Routine background check and Alcohol Tobacco and Firearm (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check.Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/VetTo apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22821Employment Status: Hourly Full-TimeFunction: MaintenanceReq ID:27095 PurposeAbility to machine, mill, and grind various types of metals. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Maintenance Machinist A. Reports directly to the department Manager. Job ResponsibilitiesPerforms all tasks under general supervision.Provides training and assistance to less experienced Machinists.Assumes ownership of work task and demonstrates initiative to get work completed.Creates and reworks machinery and equipment components according to requisition documentation, blueprints, or other drawings.Sets up equipment operation feed, speed and temperature.Follows established procedures for operating various conventional and/or CNC (computerized numerical control) manufacturing equipment for tasks such as cutting, punching, forming, drilling, tapping, turning, milling, grinding, and stamping to fabricate, form or shape manufactured parts, tools or parts assemblies from raw materials.Selects and measures raw materials and parts to specifications to prepare for production processing.Performs reworking and machining of new and spare production parts for departments.Repairs maintenance parts as needed.Verifies the accuracy of work by using calipers, micrometers, dial indicators, and various measuring instruments.Order and maintain project related material as required.Assist with keeping neat and orderly records on work performed and repairs made.Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result.Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required.Perform work assignments efficiently while being consistent with good safety practices.Report any maintenance and/or safety issues to supervisor.Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job.Other duties as assigned by the department ManagerBasic RequirementsMust pass the skilled trade assessment test for this position.Must have a basic knowledge and experience reading mechanical drawings.Must have a basic knowledge and experience in proper machining and grinding techniques (Feedrates, sequencing, cutting speeds).Must have a basic knowledge and experience in setting up machine tools to produce precision parts.Must have a basic knowledge and experience in writing and modifying machine programs.Must be able to use math to calculate dimensions and determine speeds and feed rates.Ability to use various measuring devices (calipers, micrometers, dial indicators, etc.)Excellent attendance required.Must possess basic mechanical aptitude.Must possess good organizational and communication skills.Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision.Capable of lifting up to 75 pounds on an occasional basis.May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.)Must be able to work in confined areas, climb ladders, and work at heights of 50 feet.Must be able to wear a respirator.Must be willing to continuously improve technical skills and knowledge.Must be able to understand and interpret the specifications and procedures related to this job.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22821 Employment Status: Hourly Full-Time Function: Maintenance Req ID:25682 Job ResponsibilitiesPURPOSE: Move, build, install, and demolish equipment and mechanical services. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Construction Millwright A. Reports directly to the department Manager. • Performs all tasks under general supervision. • Provides training and assistance to less experienced Millwrights. • Performs installations and demolition on buildings, mechanical equipment and utility systems using one or more trade skills (e.g., mechanical, plumbing, carpentry). • Maintains current knowledge of all applicable procedures and safety measures. • Installs, modifies, moves, and dismantles machinery and equipment according to requisition documentation, layout plans, blueprints, or other drawings. • Prepares installation site by constructing foundations and aligns and fastens machinery to the foundation using hoists, dollies, rollers, trucks, tools, squares, rules, and micrometers. • Perform field welding and fabrication during equipment installations or modifications. • Responsible for safely demolishing unused equipment and services. • Oversee construction contract and service work as assigned. • Order construction material as required. • Assist with keeping neat and orderly records on work performed. • Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. • Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. • Perform work assignments efficiently while being consistent with good safety practices. • Report any maintenance and/or safety issues to supervisor. • Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. • Other duties as assigned by the department Manager. • Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Job Requirements• High School education or equivalent. • Must have a basic level of knowledge and experience reading mechanical drawings and installation manuals. • Must have a basic level of knowledge and experience in rigging, leveling, and lagging of machinery. • Must have a basic level of knowledge and experience in proper piping materials, methods, and installation. • Must have a basic level of knowledge and experience in proper welding and fabrication techniques. • Ability to use various measuring devices (tape measure, micrometers, levels, plumb bobs, etc.) • Excellent attendance required. • Must possess basic mechanical aptitude. • Must possess good organizational and communication skills. • Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. • Capable of lifting up to 75 pounds on an occasional basis. • May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) • Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. • Must be able to wear a respirator. • Must be willing to continuously improve technical skills and knowledge. • Must be able to understand and interpret the specifications and procedures related to this job.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Req ID:26295 Job ResponsibilitiesPURPOSE: Primarily a support role running multiple pieces of toolroom equipment to make parts to print.JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES)Maintain a high standard for safety, workmanship, product quality and productivity.Primarily a support role running multiple pieces of toolroom equipment to make parts to print.Proficiency in multiple machines and above average knowledge in one is expected.On occasion build, rework, maintain, and repair all forms of tooling using available equipment and resources.Work from design prints, sketches, sample parts and oral instructions.Personally possess basic inspection and machining tools to effectively perform your job.Determine the best method to manage and complete a project by a designated due date.Work as a team lead as well as a team member depending on the departmental workload.Effectively communicate with other personnel and educate apprentices in best practices.Maintain accurate documentation of tool modifications, repair, preventative maintenance and individual work performed throughout the shift.Work overtime or come in on off hours to satisfy production requirements.Safely use a tow motor, crane or jib hoist to move materials and tooling.Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Job RequirementsBASIC REQUIREMENTS:Completed a high school or post high school machinist program or demonstrated the ability to perform the aforementioned tasks.Proficiency in operating all common machining equipment, mills, lathes, grinders, etc.Ability to program computer controlled toolroom equipmentAbove average knowledge of computersAbility to Stick and TIG weld is a plus but not required.Use of all inspection measurement equipment standard in the tool making industryTime management skills and the ability to work to deadlines in a fast-paced environment.Read, understand and follow specifications and prints.Good communication skillsModerate hand dexterity is required for this position.Mainly first shift schedule, but available to work second shift, overtime and weekends as required.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: MentorEmployment Status: Hourly Full-TimeFunction: MaintenanceReq ID:27104 PurposeElectrically troubleshoot, repair and maintain complex production equipment and systems. Primarily 1st shift schedule could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts, on-call. Daily work activity is directed by the Group Leader and a Machine Repair electrician A. Reports directly to the department Manager.Job ResponsibilitiesPerforms all task under general supervision.Provides training and assistance to less experienced Electricians.Assumes high level ownership during off-shift work periods related to work prioritization, production needs, and safety requirements.Troubleshoot, inspect, adjust, and repair automated machines, process systems, and robotic systems to ensure they are working properly and safely.Performs preventative maintenance and repairs on equipment and systems (e.g., mechanical, electrical). Evaluates and recommends equipment improvements to improve availability, capability and yield.Performs equipment failure analyses (including preventative and unscheduled maintenance).Assists engineers in operating test equipment to obtain performance data on parts and assemblies under varying operating conditions.Collects, compiles and summarizes test data, and reviews results with engineering to resolve problems such as product or equipment issues, malfunctions and incomplete test data.Diagnoses test equipment malfunctions, and services and repairs equipment as required.Diagnose malfunctions and analyze results using testing devices, then repair and replace broken machine componentsTroubleshoot, repair, inspect, and maintain combustion systems. Responsible for continuing education to keep up with changing technology.Configure, commission, and test new equipment while making sure all maintenance and installations are well-documented, working properly, and operating safely.Document repairs for regulatory purposes.Perform bench work in repairing and maintaining production equipment and spare part assemblies. Oversee maintenance contract and service work as assigned.Order and maintain spare parts.Assist with keeping neat and orderly records on work performed.Work with Engineering, Production Team Leads, Manager, Group Leaders, and coworkers to accomplish the desired result.Adjust schedule and work hours to accomplish the desired result, ability to be on-call and must be able to work weekends, off shifts, and holidays as required.Perform work assignments efficiently while being consistent with good safety practices. Assist in procedure/equipment upgrades as necessary.Report any maintenance and/or safety issues to supervisor.Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job.Other duties as assigned by the department Manager.May be asked to rotate between Mentor and Euclid facilities based on job training requirements.Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Job RequirementsMust have successfully completed an Electrician Apprentice Program, an Associate degree/certificate in Electronics/Electrical Technology, or have equivalent job experience.Must pass the skilled trade assessment test for this position.Must have a basic knowledge of electrical troubleshooting. Some knowledge of combustion and/or hydraulic systems may be required.Must have a basic knowledge and experience in relay logic, industrial controls, electronics, and PLCs.Must have a basic level of knowledge and experience reading electrical schematics, wiring diagrams, ladder logic, and engineering drawings.Must have a basic ability to use a computer to communicate with machine control systems and PLCs. Must have a basic ability to diagnose the root cause of a problem, make repairs, and test for proper operation.Ability to use various measuring devices (multi-meter, oscilloscope, megohmmeter, etc.) Excellent attendance required.Must possess good organizational and communication skills.Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision.Capable of lifting up to 75 pounds on an occasional basis.May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Be mechanically inclined.Must be able to work in confined areas, climb ladders, and work at heights of 30 feet.Must be able to wear a respirator.Must be able to distinguish colors used in color-coding wires and electronic components. Must be willing to continuously improve technical skills and knowledge.Must be able to understand and interpret the specifications and procedures related to this job.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Maintenance Req ID:26437 PURPOSE: Electrically troubleshoot, repair and maintain complex production equipment and systems. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts, on-call. Daily work activity is directed by the Group Leader and a Machine Repair electrician A. Reports directly to the department Manager.JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES):Performs all task under general supervision.Provides training and assistance to less experienced Electricians.Assumes high level ownership during off-shift work periods related to work prioritization, production needs, and safety requirements.Troubleshoot, inspect, adjust, and repair automated machines, process systems, and robotic systems to ensure they are working properly and safely.Performs preventative maintenance and repairs on equipment and systems (e.g., mechanical, electrical). Evaluates and recommends equipment improvements to improve availability, capability and yield.Performs equipment failure analyses (including preventative and unscheduled maintenance).Assists engineers in operating test equipment to obtain performance data on parts and assemblies under varying operating conditions.Collects, compiles and summarizes test data, and reviews results with engineering to resolve problems such as product or equipment issues, malfunctions and incomplete test data.Diagnoses test equipment malfunctions, and services and repairs equipment as required.Diagnose malfunctions and analyze results using testing devices, then repair and replace broken machine componentsTroubleshoot, repair, inspect, and maintain combustion systems. Responsible for continuing education to keep up with changing technology.Configure, commission, and test new equipment while making sure all maintenance and installations are well-documented, working properly, and operating safely.Document repairs for regulatory purposes.Perform bench work in repairing and maintaining production equipment and spare part assemblies. Oversee maintenance contract and service work as assigned.Order and maintain spare parts.Assist with keeping neat and orderly records on work performed.Work with Engineering, Production Team Leads, Manager, Group Leaders, and coworkers to accomplish the desired result.Adjust schedule and work hours to accomplish the desired result, ability to be on-call and must be able to work weekends, off shifts, and holidays as required.Perform work assignments efficiently while being consistent with good safety practices. Assist in procedure/equipment upgrades as necessary.Report any maintenance and/or safety issues to supervisor.Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job.Other duties as assigned by the department Manager.May be asked to rotate between Mentor and Euclid facilities based on job training requirements.Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.BASIC REQUIREMENTS:Must have successfully completed an Electrician Apprentice Program, an Associate degree/certificate in Electronics/Electrical Technology, or have equivalent job experience.Must pass the skilled trade assessment test for this position.Must have a basic knowledge of electrical troubleshooting. Some knowledge of combustion and/or hydraulic systems may be required.Must have a basic knowledge and experience in relay logic, industrial controls, electronics, and PLCs.Must have a basic level of knowledge and experience reading electrical schematics, wiring diagrams, ladder logic, and engineering drawings.Must have a basic ability to use a computer to communicate with machine control systems and PLCs. Must have a basic ability to diagnose the root cause of a problem, make repairs, and test for proper operation.Ability to use various measuring devices (multi-meter, oscilloscope, megohmmeter, etc.) Excellent attendance required.Must possess good organizational and communication skills.Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis.May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Be mechanically inclined.Must be able to work in confined areas, climb ladders, and work at heights of 30 feet.Must be able to wear a respirator.Must be able to distinguish colors used in color-coding wires and electronic components. Must be willing to continuously improve technical skills and knowledge.Must be able to understand and interpret the specifications and procedures related to this job.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22821 Employment Status: Hourly Full-Time Function: Maintenance Req ID:26413 PURPOSE: Move, build, install, and demolish electrical panels, equipment, and power and network services. Primarily 1st shift schedule could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Construction Electrician A. Reports directly to the department Manager.JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES)Performs all tasks under general supervision.Provides training and assistance to less experienced Electricians.Build electrical panels and test panels for production equipment to print.Performs installations and demolition on buildings, mechanical equipment and utility systems using one or more trade skills (e.g., electrical, mechanical).Maintains current knowledge of all applicable procedures and safety measures.Installs and replaces electrical circuits, equipment and appliances, using hand tools and testing instruments, to supply electrical power for lighting, equipment, and machine operations.Provide power and control wiring for new equipment installations and equipment upgrades.Assist in commissioning of newly installed or upgraded equipment.Responsible for safely demolishing unused equipment and services.Oversee construction contract and service work as assigned.Order construction material as required.Assist with keeping neat and orderly records on work performed.Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result.Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required.Perform work assignments efficiently while being consistent with good safety practices.Report any maintenance and/or safety issues to supervisor.Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job.Other duties as assigned by the department Manager.Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.BASIC REQUIREMENTSMust have successfully completed an Electrician Apprentice Program, an Associate degree in Electronics/Electrical Technology or have equivalent job experience.Must pass the skilled trade assessment for this position.Must have a basic level of knowledge and experience reading wiring diagrams and engineering drawings.Must have a basic level of knowledge and experience in panel installation and wiring practices.Must have a basic level of knowledge and experience in proper conduit materials, methods, and installation.Must have a basic level of knowledge in the National Electrical Code (NEC)Ability to use various measuring devices (multi-meter, tape measure, levels, plumb bobs, etc.)Excellent attendance required.Must possess basic mechanical aptitude.Must possess good organizational and communication skills.Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision.Capable of lifting up to 75 pounds on an occasional basis.May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.)Must be able to work in confined areas, climb ladders, and work at heights of 50 feet.Must be able to wear a respirator.Must be able to distinguish colors used in color-coding wires and electronic components.Must be willing to continuously improve technical skills and knowledge.Must be able to understand and interpret the specifications and procedures related to this job.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.