Travel Respiratory TherapistCompany: Fusion Medical StaffingLocation: Facility in Avon, OHJob DetailsFusion Medical Staffing is seeking a skilled Respiratory Therapist for a week travel assignment in Avon, OH. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team.Required Qualifications:One year of recent experience as a Registered Respiratory TherapistRegistered Respiratory Therapist (RRT) credential from the NBRCValid respiratory therapy license in compliance with state regulationsCurrent BLS certification (AHA/ARC)Preferred Qualifications:ACLS or PALS Certification (AHA/ARC)Other certifications and licenses may be required for this positionSummary:A Registered Respiratory Therapist provides advanced respiratory care to patients with complex pulmonary disorders and critical illnesses. They independently assess, treat, and manage patients with a wide range of respiratory conditions, including those in intensive care units and emergency situations. RRTs work collaboratively with physicians and healthcare teams to deliver life-saving therapies and patient-centered care.Essential Work Functions:Collaborate with physicians to develop patient treatment plansExamine and interview patients with breathing and/or cardiopulmonary disorders Perform diagnostic tests, such as measuring lung capacity or collecting blood/sputum samples Treat patients through various methods including chest physiotherapy and aerosol medicationsSet up and monitor equipment to ensure the patient is receiving the correct amount of oxygen at the correct rateObserve and record patient status and progressWork collaboratively with a multidisciplinary team to ensure appropriate patient care Educate patients and/or family members on how to properly take medication and use equipmentPerform other duties as assigned within the scope of RRT practice Required Essential Skills:Critical thinking, service excellence and good interpersonal communication skillsThe ability to read, write, & communicate in the English language is requiredAbility to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skillsPhysical Abilities - Remain in a stationary position, move about, move equipment (50-100lbs), pushing, pulling, bendingInterpersonal Skills - To work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalismTechnical/Motor Skills - Ability to grasp, fine manipulation, pushing/pulling and able to move about when assisting with procedures and/or using department equipment. Mental Requirements - Must be able to cope with frequent contact with the general public, customers, and meeting deadlines under pressure. Must be able to work under close supervision occasionally as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detailSensory - Visual acuity, ability to effectively communicate.Benefits Include:Highly competitive pay for travel professionalsComprehensive medical, dental, and vision insurance with first day coveragePaid Time Off (PTO) after 1560 hoursLife and Short-term disability offered401(k) matchingAggressive Refer-a-friend Bonus Program24/7 recruiter supportReimbursement for licensure and CEUsWhy Choose Fusion At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you.Other Duties Disclaimer:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice.Start your rewarding career as a Travel Registered Respiratory Therapist (RRT) with Fusion Medical Staffing and join our mission to improve lives. Apply now!*Fusion is an EOE/E-Verify Employer #pb8

Our team is growing, and we're looking for top-caliber Physical Therapists to join us in Lorain and surrounding locations in Ohio.Why FOX Rehabilitation • Pioneer of Geriatric House Calls to older adults in their communities.• Provide physical therapy services in a 1:1 setting to help abolish ageism.• Drive rewarding patient outcomes.• Facilitate clinically-excellent autonomous interventions.• Benefit from the flexibility to create, control, and alter your treatment schedule.• Be a part of an Interdisciplinary approach by a therapy team focused on functional outcomes.Available Opportunities:• Full-time/Part-time - Salaried with benefits• PRN/Flex - PPU (Paid Per Unit)• H1B - Able to provide sponsorship to those who need it that are qualified• New Grads-FOX offers a widely recognized Emerging Professionals Mentor Program!What you'll get:• Clinical and non-clinical career growth opportunities• Supportive Clinical Community• Unlimited access to continuing education• Professional Certification Reimbursement• Access to cutting-edge technology• Medical, Dental, Vision, 401k (for those who qualify)What you'll need:• Valid Physical Therapy license in the state(s) of practice, or eligibility to apply• Degree from an accredited physical therapy program• Basic computer literacy skills• Current CPR certificationWho is FOX FOX is a primarily clinician-operated, professional private practice of full-time physical, occupational, and speech therapists, built on the foundation of Geriatric House Calls. Our one-on-one care fosters a rewarding environment, and therapists have the flexibility to shape their schedules for a successful work-life balance. Empowered by clinicians, FOX advocates for our people and believes in their significant contributions to our professional society.Contact FOX Now! Larissa Wiaziwsky, Clinical Career SpecialistYou can also text FOX to to learn more!#LI-LW1FOX Rehabilitation is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. In Ohio, the standard base pay range for a Full-Time role is $60,000 - $100,000 annually with an opportunity to earn more. Part-Time and FOX Flex (PRN) will be pro-rated.

Overview: We believe in setting our employees up for success. That’s why we believe in providing an orientation personalized to your work environment. Even when your orientation period ends, you can rest assured that the Synchrony team will always have your back. Responsibilities: Weekly pay, health, dental, and vision benefits after your first month, student loan repayment, a competitive 401(k) match, and more! If you’re looking for a place that embraces you for who you are, helps you achieve your full potential, and makes working hard feel less like hard work, then look no further than Synchrony.This position will split between two facilites:Lorain Estates and Broadway Creek. Qualifications: Job SummaryThe Physical Therapist (PT) is responsible for providing a full range of physical therapy services including assessment, treatment planning and therapeutic interventions in an interdisciplinary environment consistent with the position’s qualifications, professional practices and ethical standards.Licenses and CertificationsMust have and maintain a current, valid state PT licensure or certification Current valid CPR certification, preferredQualificationsEducation: Degree in Physical Therapy from an accredited programExperience: 0-1 yearsRoles and Responsibilities• Conduct thorough assessments to evaluate patients’ physical conditions, functional limitations, and rehabilitation needs.• Develop and implement personalized treatment plans, including therapeutic exercises, manual therapy techniques, and modalities to improve patients’ physical function.• Educate patients and their families on exercise techniques, posture, body mechanics, and strategies to manage their condition effectively.• Maintain accurate and up-to-date documentation of patient progress, treatment plans, and outcomes in compliance with facility policies and regulatory requirements.• Collaborate with interdisciplinary team to ensure comprehensive patient care.• Other duties as assigned.#rehab GET IN TOUCH: Whitney

Overview: Setting: Home Health Compensation: $2,088 - $2,448 estimated weekly pay Start: ASAP | open to 1-2 months out Duration: 13weeks | potential to extend Guaranteed Hours: 40 Benefits: Blue Cross Blue Shield medical benefits, paid housing or tax-free stipend, travel/licensereimbursement, licensing team, and paid reward days Referral Program:Refer a friend and earn $500 Clickherefor similar opportunities and more information about travel therapy staffing. Delta Healthcare Providers (DHP), the travel therapy staffing division of The Delta Companies, identifies qualified therapists on behalf of healthcare facilities nationwide. A single point of contact provides direct knowledge of the industry to providers. The company has been recognized with several Best of Staffing® Awards.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801Employment Status: Salary Full-TimeFunction: ManufacturingReq ID: 26563 SummaryLincoln Electric has an exciting opportunity for CAD Administrator who will support our Plant Engineering Department in Euclid, Ohio. Plant Engineering is responsible for executing capital projects and delivering engineering support to the Consumable and Machine divisions within Cleveland Operations.This role requires a highly skilled AutoCAD Electrical CAD Administrator to lead software upgrades, ensure compliance with CAD standards through print reviews, manage and expand the electrical parts library, provide training for new team members, and oversee user access and lifecycle management within Vault.What You Will Do• Collaborate in a team environment on capital and strategic projects for Cleveland Operations production facilities.• Software Upgrades: Lead the upgrade of AutoCAD Electrical and Vault software on a biennial basis.• Print Review: Evaluate electrical prints to ensure compliance with Lincoln Electric CAD standards.• Library Management: Maintain and expand the electrical parts library by reviewing standard components and creating necessary footprints and schematic symbols.• Training: Deliver training sessions for new hires, co-ops, and interns on AutoCAD Electrical and Vault usage.• Vault Administration: Manage user access and lifecycle workflows within Vault for the Plant Engineering department.• Perform additional duties as assigned by the department manager.• Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience Requirements• Bachelor’s degree in Electrical Engineering Technologist, CAD Technology, or a related field.• Minimum of 3 years of professional experience.• Experience with AutoCAD Electrical and Vault administration preferred.• Strong initiative and ownership mindset with a focus on delivering results.• Sound judgment, self-motivation, and a strong commitment to safety.• Excellent organizational, written, and verbal communication skills.• Ability to manage multiple assignments and adapt to changing priorities.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Respiratory Therapist - ICUWe are seeking a skilled and compassionate Respiratory Therapist to join our Intensive Care Unit (ICU) team. In this role, you will provide critical respiratory care to patients with severe breathing disorders or life-threatening conditions, ensuring optimal outcomes through advanced therapeutic interventions.Key Responsibilities:Assess, treat, and monitor patients with acute or chronic respiratory conditions in the ICU setting.Initiate and manage mechanical ventilation and other life-support systems for critically ill patients.Administer aerosol medications, oxygen therapy, and other respiratory treatments as prescribed.Perform diagnostic tests such as arterial blood gas analysis and pulmonary function testing to evaluate lung performance.Collaborate with physicians, nurses, and other healthcare professionals to develop and implement individualized care plans.Respond to emergency situations, including rapid response or code blue events, to provide airway management and support.Maintain accurate patient records and document all treatments and progress in compliance with hospital policies.Educate patients and families on respiratory care techniques and equipment use when transitioning out of the ICU.Work Environment:Work in a fast-paced ICU environment that requires critical thinking and quick decision-making skills.Collaborate closely with a multidisciplinary team dedicated to providing life-saving care.Be prepared for rotating shifts, including nights, weekends, and holidays, as required in critical care settings.Benefits:Competitive salary and comprehensive benefits package.Opportunities for professional growth through specialized training and certifications in critical care.A supportive work environment that values teamwork and innovation in patient care delivery.*This information is based on the Bureau of Labor Statistics (BLS). Actual job responsibilities may vary by location.*

Company DescriptionAmerica's Best is part of National Vision, one of the largest optical retailers in the United States. The America’s Best brand continues to grow, with 1000 stores and counting. Each location combines both parts of the optical equation – eyewear and eye care – into one excellent experience at a single low price.For more details about America's Best, visitAmericasBest.com.At National Vision, we believe everyone deserves to see their best to live their best. We help people by making quality eye care and eyewear more affordable and accessible.Our strong force of talented opticians and associates help customers see their best to live their best. By selling, fitting and dispensing eyewear to customers with superb customer service, our opticians ensure our standard of excellence is never compromised – and they’re rewarded for that with an impressive benefits package.How would you like Sundays off Yes, every Sunday we’re closed!Job DescriptionWhat would you do – The SpecificsMeet National Vision’s sales and company objectives.Follow the America’s Best “Code of Excellence” to ensure customer satisfaction by creating a warm and welcoming environment for customers.Assist with dispensing eyeglasses and contact lenses to customers.Perform insertion and removal training of contact lenses to customers.Educate clients on proper eyeglass and contact lens care.Maintain accurate and organized patient records.Maintain visual merchandising according to Brand and Company Standards.Mentor potential Apprentice Opticians as permitted by law.QualificationsAre you the right fit – The Suitable TalentPrevious retail experience preferred, but not required.Maintain license, as required by state.Strong selling skills, aimed at meeting both the store’s and self-sales targets, by following company policies.Strong customer service skills.Able to give instruction in a clear and concise manner to customers.Effective interpersonal skills.Excellent organizational skills.Detailed oriented.Multitasking and time-management skills.Professional attitude and appearance.Additional InformationTaking care of our peopleWe understand the importance of financial health and security, and because of that, we provide competitive compensation to all Associates – including bonus potential for every position in the store! We also offer a comprehensive benefits package including health and dental insurance, 401k retirement savings with company match, flex spending account, paid personal time off, paid company holidays, parental leave, employee eyewear discount and much, much more. At National Vision, we strive to deliver opportunities for professional growth and long-term career fulfillment. We provide training programs, access to educational courses and pride ourselves on the ever-increasing amount of promotions from within.Please see our websitewww.nationalvision.comto learn more.We are an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, veteran status, and other legally protected characteristics.

Epic Travel Staffing is hiring aTravel - Radiation TherapyShift:Days / 8a-5p, 8x5, 40 hrs per week,M-F,No call, no weekendsLength: 12 weeksRequirements:OH LicenseMust have 1 years of experienceElekta experience is a plusHDR brachytherapy, also a plusAARTBLSEKG exam preferredOther Details:Position will accept local candidates (local fee will apply)Epic Travel Staffing:Day 1 health insurance coverage and comprehensive benefits options401(k) matching programWeekly direct depositConcierge state licensing program for RN and other healthcare modalities in multiple states, including CAIndustry leading allowances and reimbursementsReferral program with cash bonuses and additional perksExclusive job openings - Only at EpicEpic Elite Program - Priority status at top facilities and exclusive loyalty bonusesEpic Staffing Group provides equal employment opportunities (EEO) to allemployees and applicants for employment without regard to race, color, religion, sex, national origin, housing, age, disability, or genetics.We will consider all qualified applicants for employment, including those with criminal histories, in a manner consistent with the requirements of applicable federal, state, and local laws.By applying for this position, you agree that any calls from Epic Staffing Group and its subsidiaries may be monitored or recorded for training and quality assurance purposes.Pay rate is estimated based on weekly gross income. Weekly gross pay based on qualifications and experience. Rate applies to travel positions only (50+ miles from permanent address).Estimated Weekly Rate: $2481 per weekJob ID: 987457

Starting Salary: $72,000 - $90,000 /year based on experience Environment: Special Education, Middle School & High School ChanceLight Behavioral Health, Therapy, & Education, a growing, dynamic organization with a social mission to offer hope, is seeking a Board Certified Behavior Analyst (BCBA) to join our award-winning Special Education team and perform meaningful work in a culture that welcomes innovation, encourages creative expression and offers limitless potential for personal and professional satisfaction! If you thrive in a fast-paced, goal-oriented, outcome-driven environment, seek a career with genuine purpose, and possess a problem-solving mindset, a sense of humor, and a stellar work ethic We Should Talk! As a Board Certified Behavior Analyst, you will provide comprehensive clinical and educational support tailored to the individual needs of Middle School and High School students, oversee and conduct educational and clinical training, and evaluate individual team member performance. In your role as the primary quality assurance leader, you will ensure adherence to applicable laws, regulations, and internal standards pertaining to educational and behavioral services. Responsibilities Include: Providing comprehensive training and ongoing support to teachers and educational staff in developing effective functional behavior assessments (FBAs) and behavior intervention plans (BIPs).Monitoring and evaluating the quality and effectiveness of academic and behavioral services provided to students.Supporting ChanceLight staff by demonstrating and reinforcing effective instructional practices to ensure student progression aligned with individualized education program (IEP) goals.Assessing professional development needs of educational staff; researching, developing, and delivering targeted training programs based on identified requirements.Participating actively in staff development activities, including attending conferences, professional training, and seminars to maintain and enhance core competencies.Training, certifying, and continually coaching school employees in implementing and maintaining crisis management systems.Assisting in recruitment, hiring processes, orientation, and ongoing training of behavior specialists and other pertinent staff.Researching, evaluating, and recommending evidence-based curricula and instructional resources that comply with educational standards and departmental requirements.Developing, implementing, and supervising systems designed to effectively meet the individualized needs of students, classrooms, and the entire educational site.Attending and actively participating in required meetings, including but not limited to school team meetings, interdisciplinary meetings, and all-staff sessions.Conducting regular, systematic quality assurance assessments at the student, staff, classroom, and site levels and providing detailed recommendations for continuous improvement.Ensuring consistent compliance with Department of Education regulations, as well as ChanceLight's internal policies and standards for educational excellence and behavioral interventions.Performing other duties and/or projects as assigned. Qualifications Required: Master's degree or higher in applied behavior analysis, behavioral therapy or a closely related field of study.Licensed currently or in the process of obtaining a board certified behavior analyst (BCBA) credential.Licensed currently or in the process of obtaining a special education credential preferred.Well-versed in applied behavior analysis (ABA) including positive behavior interventions and supports (PBIS), effective teaching strategies, classroom management systems, data-based decision making, and functional analysis/behavior intervention plans.Prior experience and/or knowledge in special education services and compliance, particularly for students with autism related disabilities.Highly skilled in working with individuals with severe learning, emotional behavioral disorders, autism spectrum disorders, and/or other related disabilities.Prior experience and highly skilled in crisis management systems and intervention.Prior experience and highly knowledgeable in working with students with IEP's.Ability to think and act quickly and calmly in an emergency and make independent decisions.Advanced oral and written communication, organization, conflict resolution, multitasking, problem solving, and decision-making ability.Proven success in developing and implementing effective treatment plans for students with diverse needs.Knowledge of relevant technology including experience with computers, Microsoft Office Suite, database entry and basic office equipment. ChanceLight Behavioral Health, Therapy, & Educationis the nation’s leading provider of alternative and special education programs for children and young adults. For more than 45 years, and in partnership with over 235 school districts nationwide,we have helped change the direction of more than240,000 student lives! Learn more about our history, our mission and the program services we provide by visiting the link below: https://bit.ly/m/WorkWithPurpose At ChanceLight we believe in providing more than just a job, as a member of our team you'll receive the opportunity to make meaningful impacts, the support needed to achieve success, and all the tools essential to reaching your personal & professional fulfillment! Your path to a truly rewarding career starts here – where growth, empowerment, and collaboration define our culture; and every day is aChanceto transform lives through education! Perks and Benefits Include: Comprehensive Medical, Dental and Vision PlansFREE Telehealth and Virtual Counseling SessionsFREE Health Advocacy Services and 24/7 Nurse LineCompany Paid Life & Disability InsuranceCompany Paid Employee Assistance ProgramFlexible Spending and Health Savings AccountsPersonal Protection Insurance PlansCigna Healthy Pregnancies, Healthy Babies ProgramLegal Services InsurancePet Health InsuranceAccrual-based Paid Time OffSchool Hours and Paid Holiday ScheduleExtensive Personal and Life Event Paid Leave Policy401k Retirement Saving PlanPerks at Work Employee Discount ProgramOpportunities for Growth & DevelopmentAnd So Much More! If you're ready to start making lasting impacts on the lives of students and contribute to the creation of a brighter future This Is YourChance! Join us and together, we can empower students to overcome challenges, build confidence and unlock their full potential! Careers, With ChanceLight Work. With Purpose. Copyright © 2024 ChanceLight Behavioral Health, Therapy, & Education, aChanceLight® company *Benefit plans and eligibility requirements may vary based on role and employment status.EducationRequiredMasters or better in Applied Behavior Analysis or related fieldLicenses & CertificationsRequiredAll State Req CredentialsBCBAPreferredSpecial Ed CertificationSkillsRequiredSpecial EducationMiddle School EducationHigh School EducationApplied Behavior Analysis (ABA)Positive Behavior Intervention and SupportFunctional Behavioral Assessment (FBA)Emotional DisturbanceAutismSpecific Learning DisabilCrisis InterventionCounseling & GuidanceTeacher Mentoring/TrainingIndividualized Education Programs (IEP)Project ManagementInterpersonal SkillsOffice/AdministrativeBehaviorsPreferredDedicated: Devoted to a task or purpose with loyalty or integrityFunctional Expert: Considered a thought leader on a subjectMotivationsPreferredAbility to Make an Impact: Inspired to perform well by the ability to contribute to the success of a project or the organizationEqual Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description:Supplemental Health Care has been named Best in Staffing based on real feedback from our working school professionals, we’re proud to be a partner to every person we work with. For our Special Education Teachers, that means unique support and experienced recruiters from our School Centers of Excellence to assist you in every step of your career. We’re currently hiring in Lorain, Ohio to support a district in need of a Special Education Teacher for the current school year.Telehealth Special Education Teacher Contract Details:$31.50 – $34 per hour40-week contracts$3,000 assignment bonus available *conditions apply; ask recruiter for detailsHours: full-timeDeliver specialized support, instruction, and advocacy for students with disabilities in a manner that is conducive to academic and personal development.Collaborate with multidisciplinary team members and student guardians to develop and implement effective Individualized Education Plans (IEPs)Participate in IEP meetings and work closely with multidisciplinary teams to support each student’s goalsComplete and implement lesson plans.Document progress of students and develop data collection proceduresMulti-categorical/Cross-categorical, intellectual, learning, emotional, and/or behavioral disability special education certifications may be acceptableTypes of classroom/assignment options:Early childhood, elementary, middle, high, or alternative schoolsPull out/push in services, co-teaching, inclusion classroom, resource classroom, or self-contained classroomLow incidence or high incidenceAt SHC, we prioritize students’ well-being above all, offering a broad range of benefits, programs, and support services to help you succeed in your role. With over 2,000 school professionals on staff, we consistently receive a 9 out of 10 rating for service and support. SHC has earned the prestigious “Best of Staffing” award multiple times, based on feedback from an independent survey partner, Clearly Rated. In addition to competitive benefits, we also provide abundant career growth and mentorship opportunities. Join SHC for the school employer experience you’ve been looking for.If you’d like more detail on this Special Education Teacher assignment or are ready to get started with the placement process, please apply online now. Our team is standing by to respond as quickly as possible.Supplemental Health Care offers a wide variety of industry-leading benefits including:Full medical, dental, vision, life, and even pet insurance to provide you with the coverage you need whenever you need it.Round the clock support. No matter where you are or what time it is, Supplemental Health Care is standing by.Our Share the Care program is the most dynamic, profitable referral program in the industry. To learn more about Share the Care, check out shccares.com/referrals.SHC offers a 401k Retirement Savings Program to both full-time and part-time employees with a wide range of investment options.Discounted and free online access to CEU courses through Supplemental University. Through our online CEU options, you have access to the courses you need on your schedule.Requirements:Bachelor’s Degree or Master’s Degree from an accredited college or university related areaTeaching Certification with Telehealth Special Education EndorsementSpecial Education Teaching Endorsement must meet position requirementsMulticategorical/Crosscategorical, intellectual, learning, and/or emotional disability special education certifications may be acceptedSupplemental Health Care is an Equal Opportunity Employer, including disabled/veterans. SHC is committed to providing reasonable accommodation to, among others, individuals with disabilities and disabled veterans. If you need an accommodation because of a disability to search and apply for a career opportunity with Contractor, please send an e-mail to or call to let us know the nature of your accommodation request and your contact information.Supplemental Health Care will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of applicable local, state, or federal law (including San Francisco Ordinance #131192, Los Angeles Municipal Code 189.00, the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act). For this type of employment, Kentucky state law requires a criminal record check as a condition of employment.For a copy of the Supplemental Health Care Privacy Policy, please visit http://www.shccares.com/privacy-policy.

As a Store Manager Trainee, you’ll train on all aspects of successfully running a store in preparation for running for your own store. You’ll be involved in supervising day-to-day store activities, ensuring overall store performance, identifying staffing needs, managing schedules and developing operational action plans while mentoring and developing the team. Position Type: Full-TimeEstimated Hours: 45 hours per weekStore Manager Trainee Starting Wage: $28.50 per hourEstimated Store Manager Earning Potential Year 1: Up to $105,500 (inclusive of salary and bonus when applicable)*Estimate may vary by location Duties and Responsibilities:Must be able to perform duties with or without reasonable accommodation. • Consistently demonstrate the Mindsets, ALDI Acts Competencies and Professional Skills (M.A.P.) as outlined for the role.• Supervises the day-to-day operations and performance of the team to provide the highest level of customer service for the customer•Understands the overarching company strategy, as well as communicates and models the core values of the organization, to create a sense of teamwork and membership among employees• Handles customer concerns and ensures an appropriate resolution• Ensures proper store signage is maintained at all times, as well as the quality and freshness of ALDI products • Assists in the hiring of store personnel by reviewing resumes and employment applications, as well as interviewing candidates• Prepares, manages, and revises weekly schedules to ensure appropriate store staffing levels• Establishes and communicates job responsibilities and performance expectations to direct reports to ensure mutual understanding and desired results • Conducts store meetings• Identifies training and development opportunities that will assist direct reports in achieving enhanced performance• Conducts annual performance evaluations, recommending store personnel for advancement and termination as appropriate• Achieves store payroll and total loss budgets• Manages cash audits in conjunction with their direct leader according to company guidelines• Monitors the competitive environment within the community and makes recommendations to the direct leader regarding adjustments necessary to maintain a competitive position• Provides product feedback to their direct leader, including recommendations regarding new items to carry or those that should be discontinued• Provides a safe environment for employees, customers, and vendors by identifying and rectifying hazards, ensuring proper ergonomics, and maintaining store equipment in proper working order• Oversees product merchandising and maintains proper stock levels through appropriate product ordering• Conducts store inventory counts and reconciliations according to company guidelines• Complies with all established company policies and procedures while upholding the security and confidentiality of documents and data• Other duties as assigned Physical Demands: • Ability to stock merchandise from store receiving to shelving; ability to place product, weighing up to 45 pounds, on shelving at various heights• Regularly required to sit, stand, bend, reach, push, pull, lift, carry and walk about the store• Must be able to perform duties with or without reasonable accommodations. Job Qualifications: • You must be 18 years of age or older to be employed for this role at ALDI• Ability to work both independently and within a team environment• Ability to provide and lead others to provide prompt and courteous customer service• Ability to develop rapport, trust, and open communication that enhances the growth and job performance of direct reports• Ability to interpret and apply company policies and procedures• Ability to establish goals, guide employee performance to ensure the quality and completion of work assignments• Ability to evaluate and drive performance of self and others• Ability to understand and apply management principles concerning budgeting, personnel costs, and expenses• Ability to operate a cash register efficiently and accurately• Ability to safely and properly operate equipment, including electric/manual hand jack, floor scrubber, and cardboard baler and perform general cleaning duties to company standards• Ability to stay organized and multi-task in a professional and efficient manner, following instructions and giving attention to detail• Meets any state and local requirements for handling and selling alcoholic beverages Education and Experience: • High School Diploma or equivalent preferred• A minimum of 3 years of progressive experience in a retail environment• A combination of education and experience providing equivalent knowledge • Prior management experience preferred Travel: • Full-Time Store Manager Trainees will often train at multiple locations and must have flexibility to travel within divisional requirementsALDI offers competitive wages and benefits, including:401(k) PlanCompany 401(k) Matching ContributionsEmployee Assistance Program (EAP)PerkSpot National Discount Program In addition, eligible employees are offered:Medical, Prescription, Dental & Vision InsuranceGenerous Vacation Time & 7 Paid HolidaysUp to 6 Weeks Paid Parental Leave at 100% of payUp to 2 Weeks Paid Caregiver Leave at 100% of payShort and Long-Term Disability InsuranceLife, Dependent Life and AD&D InsuranceVoluntary Term Life InsuranceALDI is committed to equal opportunity for all employees and applicants. As a proud Equal Opportunity Employer (EOE), we do not discriminate based on race, color, national origin, ancestry, citizenship status, religion, sex, sexual stereotyping, sexual orientation, gender, gender identity, gender expression, age, marital status, mental or physical disability, medical condition, genetic information, military or veteran status, pregnancy (which includes pregnancy, childbirth, and medical conditions related to pregnancy, childbirth, or breastfeeding), or any other protected characteristic. Employment may be contingent upon ALDI's receipt of an acceptable and job-related drug test, motor vehicle report, and/or reference check, as applicable and permissible by law.

Travel Radiation Therapist Company: Fusion Medical Staffing Location: Facility in Elyria, Ohio Job Details Fusion Medical Staffing is seeking a skilled Radiation Therapist for a 12 week travel assignment in Elyria, Ohio. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: Successful completion of an accredited Radiation Therapy program One year of recent experience as a Radiation Therapist required Current BLS Certification (AHA/ARC) Preferred Qualifications: Current ARRT Certification Other certifications and licenses may be required for this position Summary: A Radiation Therapist administers targeted radiation therapy to treat cancerous tumors as prescribed by radiologists and oncologists. They position patients with precision, operate advanced radiation therapy equipment, and ensure patient safety by adhering to radiation protection protocols. Radiation Therapists play a key role in delivering compassionate care, monitoring patient responses, and collaborating with the healthcare team to achieve optimal outcomes. Essential Work Functions: Position patients for treatment with accuracy, according to prescription to ensure effective treatment and minimize exposure to healthy tissue Administer prescribed doses of radiation to targeted body parts, using radiation therapy equipment according to established practices stan and safety protocols Perform regular equipment checks of radiation therapy equipment to ensure proper functionality and troubleshoot issues as needed Review prescription, diagnosis, patient chart, and identification to confirm accuracy and compliance with the treatment plan Follow radiation protection principles to ensure safety for patients, self, and others Maintain records, reports, or files required, including such information as radiation dosages, equipment settings, or patient's reaction Conduct treatment sessions independently, in accordance with long-term treatment plan and under the general direction of the patient's physician Enter data into computer and set controls to operate or adjust equipment or regulate dosage Observe and reassure patients during treatment and report unusual reactions to physician Performs other duties as assigned within the scope of Radiation Therapist practice Required Essential Skills: Critical thinking, service excellence and good interpersonal communication skills The ability to read, write, & communicate in the English language is required Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills Physical Abilities - Remain in a stationary position, move about, move equipment (50-100lbs), pushing, pulling, bending Interpersonal Skills - To work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism Technical/Motor Skills - Ability to grasp, fine manipulation, pushing/pulling and able to move about when assisting with procedures and/or using department equipment. Mental Requirements - Must be able to cope with frequent contact with the general public, customers, and meeting deadlines under pressure. Must be able to work under close supervision occasionally as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail Sensory - Visual acuity, ability to effectively communicate. Benefits Include: Highly competitive pay for travel professionals Comprehensive medical, dental, and vision insurance with first day coverage Paid Time Off (PTO) after 1560 hours Life and Short-term disability offered 401(k) matching Aggressive Refer-a-friend Bonus Program 24/7 recruiter support Reimbursement for licensure and CEUs Why Choose Fusion At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Travel Radiation Therapist with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer #pb10

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID:26401 SummaryLincoln electric has an outstanding opportunity for a Control Systems Engineer at our Cleveland, Ohio headquarters. The Control Systems Engineer is a key member of the Plant Engineering team that implementsprojects and provides support for the Consumable division of the Cleveland Operations. Control System Engineers are responsible for the physical machine hardware used in manufacturing, the networks that connect them, and the software controlling them.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoResponsible for the control systems including hardware design, software design, design documentation,networking, and data acquisition.Work closely with the Plant Engineering, MES, IT, Maintenance, and Production teams to support production and facility projects that involve networking, PLCs, HMIs, and associated software.Collaborate with multiple Operations teams to meet current and future continuous improvement project goals.Estimates time and cost for new projects.Reviews capital equipment proposals and quotations to ensure equipment meets company specifications for control systems.Provides on-site assistance troubleshooting and remediating hardware, software, and network issues with Plant Engineering, Maintenance, and IT team members.Reduce downtime on production equipment due to issues with the control system.Support network backup and device patching management process.Assist in management and inventory of control system assets including software, servers, devices, and workstations.Improve system and maintenance performance based on availability and reliability.Review security vulnerabilities and request appropriate remediation form respective teams.Compiling data from connected devices and making it available to the users throughout the organization.Develops and applies standards for control systems hardware and software.Solves complex problems; takes a new perspective on existing solutions.Works independently; receives minimal guidance.May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives.Acts as a resource for colleagues with less experience.Assumes additional responsibilities as assigned to support Lincoln Electric Company’s 2025 Higher StandardStrategyEducation & Experience RequirementsMinimum of a Bachelor's degree in Electrical Engineering.Minimum of 5 years professional experience.Experience with automation hardware and software platforms, including PLC and HMI.Experience with AutoCAD.Knowledge of NEC, NFPA, 70E, NFPA 79, and other technical codes.Ability to support and troubleshoot industrial equipment.Critical thinking with exceptional problem-solving skills.Ability to handle a variety of assignment and changing priorities.Work effectively with employees on all levels of the organization.Provide excellent written and oral communications.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Respiratory Therapist - ICUWe are seeking a skilled and compassionate Respiratory Therapist to join our Intensive Care Unit (ICU) team. In this role, you will provide critical respiratory care to patients with severe breathing disorders or life-threatening conditions, ensuring optimal outcomes through advanced therapeutic interventions.Key Responsibilities:Assess, treat, and monitor patients with acute or chronic respiratory conditions in the ICU setting.Initiate and manage mechanical ventilation and other life-support systems for critically ill patients.Administer aerosol medications, oxygen therapy, and other respiratory treatments as prescribed.Perform diagnostic tests such as arterial blood gas analysis and pulmonary function testing to evaluate lung performance.Collaborate with physicians, nurses, and other healthcare professionals to develop and implement individualized care plans.Respond to emergency situations, including rapid response or code blue events, to provide airway management and support.Maintain accurate patient records and document all treatments and progress in compliance with hospital policies.Educate patients and families on respiratory care techniques and equipment use when transitioning out of the ICU.Work Environment:Work in a fast-paced ICU environment that requires critical thinking and quick decision-making skills.Collaborate closely with a multidisciplinary team dedicated to providing life-saving care.Be prepared for rotating shifts, including nights, weekends, and holidays, as required in critical care settings.Benefits:Competitive salary and comprehensive benefits package.Opportunities for professional growth through specialized training and certifications in critical care.A supportive work environment that values teamwork and innovation in patient care delivery.*This information is based on the Bureau of Labor Statistics (BLS). Actual job responsibilities may vary by location.*

When you join our team as an Assistant Store Manager, you’ll take on key store management responsibilities including assisting with supervising day-to-day store activities, ensuring overall store performance, managing schedules, and developing operational action plans while identifying training opportunities to develop and grow the team. Position Type: Full-TimeAverage Hours: 38 hours per weekStarting Wage: $25.50 per hourWage Increase: Year 2 - $26.50 per hour Duties and Responsibilities:Must be able to perform duties with or without reasonable accommodation • Assists the direct leader with developing and implementing action plans to improve operating results• Establishes and communicates job responsibilities and performance expectations to their direct reports to ensure mutual understanding and desired results• Identifies training and development opportunities that will assist their direct reports in achieving enhanced performance• Understands the overarching company strategy, as well as communicates and models the core values of the organization, to create a sense of teamwork and membership among employees• Monitors the competitive environment within the community and informs the direct leader regarding adjustments necessary to maintain the company’s competitive position• Provides product feedback to the direct leader, including making recommendations regarding new items to carry or those that should be discontinued• Participates in the interviewing process for store personnel • Communicates information including weekly information, major team milestones, developments, and concerns• Ensures store personnel adhere to inventory procedures, product handling guidelines, and cash control policies to minimize losses• Ensures an appropriate resolution of operational customer concerns in their direct leader’s absence• Identifies and rectifies hazards, ensuring proper ergonomics and maintaining store equipment in proper working order• Maintains store cleanliness standards and proper store signage at all times• Assists the direct leader with maintaining proper stock levels through appropriate product ordering• Merchandises product neatly to maximize sales• Ensures the quality and freshness of products for sale and accuracy of product signage• Assists their direct leader with achieving the store payroll and total loss budget, inventory counts, and training new employees• Supervises the day-to-day operations of their team, escalating issues to the appropriate level of support and/or leadership when necessary• Ensures direct reports complete assigned responsibilities in a timely and effective manner to provide the highest level of customer service for the business• Complies with all established company policies and procedures while upholding the security and confidentiality of documents and data• Other duties as assigned Physical Demands: • Ability to stock merchandise from store receiving to shelving; ability to place product, weighing up to 45 pounds, on shelving at various heights• Regularly required to sit, stand, bend, reach, push, pull, lift, carry, and walk about the store• Must be able to perform duties with or without reasonable accommodations Job Qualifications: • You must be 18 years of age or older to be employed for this role at ALDI• Ability to work both independently and within a team environment• Ability to provide and lead others to provide prompt and courteous customer service• Ability to develop rapport, trust, and open communication that enhances the growth and job performance of direct reports • Ability to interpret and apply company policies and procedures• Ability to establish goals, guide employee performance to ensure the quality and completion of work assignments • Ability to evaluate and drive performance of self and others • Ability to understand and apply management principles concerning budgeting, personnel costs, and expenses• Ability to operate a cash register efficiently and accurately• Ability to safely and properly operate equipment, including electric/manual hand jack, floor scrubber, and cardboard baler and perform general cleaning duties to company standards• Excellent verbal and written communication skills• Ability to stay organized and multi-task in a professional and efficient manner, following instructions and giving attention to detail• Meets any state and local requirements for handling and selling alcoholic beverages Education and Experience: • High School Diploma or equivalent preferred• A minimum of 3 years of progressive experience in a retail environment• A combination of education and experience providing equivalent knowledge • Prior management experience preferredALDI offers competitive wages and benefits, including:401(k) PlanCompany 401(k) Matching ContributionsEmployee Assistance Program (EAP)PerkSpot National Discount Program In addition, eligible employees are offered:Medical, Prescription, Dental & Vision InsuranceGenerous Vacation Time & 7 Paid HolidaysUp to 6 Weeks Paid Parental Leave at 100% of payUp to 2 Weeks Paid Caregiver Leave at 100% of payShort and Long-Term Disability InsuranceLife, Dependent Life and AD&D InsuranceVoluntary Term Life InsuranceALDI is committed to equal opportunity for all employees and applicants. As a proud Equal Opportunity Employer (EOE), we do not discriminate based on race, color, national origin, ancestry, citizenship status, religion, sex, sexual stereotyping, sexual orientation, gender, gender identity, gender expression, age, marital status, mental or physical disability, medical condition, genetic information, military or veteran status, pregnancy (which includes pregnancy, childbirth, and medical conditions related to pregnancy, childbirth, or breastfeeding), or any other protected characteristic. Employment may be contingent upon ALDI's receipt of an acceptable and job-related drug test, motor vehicle report, and/or reference check, as applicable and permissible by law.

Travel Physical Therapist (PT)Company: Fusion Medical StaffingLocation: Facility in Avon, OhioJob DetailsFusion Medical Staffing is seeking a skilled Physical Therapist for a 13-week travel assignment in Avon, Ohio. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team.Required Qualifications:Valid Physical Therapy license in compliance with state regulationsCurrent BLS certification (AHA/ARC)Preferred Qualifications:Doctorate degree in physical therapyPhysical Therapy experience, but New Grads are welcome to applyOther certifications or licenses may be required for this positionSummary:The Physical Therapist evaluates, diagnoses, and treats patients with physical impairments to improve mobility, reduce pain, and enhance quality of life. Working in settings such as hospitals, clinics, and rehabilitation centers, they create personalized, evidence-based treatment plans using exercise and manual therapy to help patients recover and become independent. This role requires strong clinical skills, effective communication, critical thinking, and a commitment to high-quality, safe patient care.Essential Work Functions:Evaluate patients’ physical conditions using standardized tests, clinical examinations, and patient history to identify functional limitations and treatment needDevelop personalized rehabilitation programs based on assessment findings and patient goalsImplement physical therapy treatment plans using various techniques to improve patient mobility and reduce painOperate specialized physical therapy equipment and modalities safely and effectively, ensuring proper maintenance and calibration of devicesAssess patient progress, adjust treatment plans as necessary, and accurately document evaluations, interventions, and outcomes in the medical recordWork closely with physicians, nurses, occupational therapists, and other healthcare professionals to ensure coordinated care and optimize treatment outcomesEducate patients and caregivers on home exercise programs, proper body mechanics, injury prevention strategies, and self-management techniques to promote long-term functional recoveryMaintain a safe treatment environment by adhering to infection control protocols, safety guidelines, and regulatory standards while addressing patients’ comfort needs during therapy sessionsEngage in quality assurance initiatives and professional development activities to remain current with best practices in physical therapyCollaborate in discharge planning to ensure smooth transitions and continued patient progress in community or home-based settingsPerform other duties as assigned within scope of practiceRequired Essential Skills:Critical thinking, service excellence, and good interpersonal communication skills The ability to read, write, and communicate in the English language Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail Sensory - Must possess visual acuity and ability to effectively communicateBenefits Include:Highly competitive pay for travel professionals Comprehensive medical, dental, and vision insurance with first day coverage Paid Time Off (PTO) after 1560 hours Life and Short-term disability offered 401(k) matching Aggressive Refer-a-friend Bonus Program 24/7 recruiter support Reimbursement for licensure and CEUsWhy Choose Fusion At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you.Other Duties Disclaimer:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice.Start your rewarding career as a Travel Physical Therapist (PT) with Fusion Medical Staffing and join our mission to improve lives. Apply now!*Fusion is an EOE/E-Verify Employer #pb6

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mentor Employment Status: Salary Full-Time Function: Manufacturing Req ID:26481 SummaryLincoln Electric is growing the Plant Engineering team and has outstanding opportunities for an experienced Electrical Engineering Technologist. Our Plant Engineering team is responsible for implementing capital projects and providing engineering support for the Consumable and Machine divisions of Cleveland Operations. Electrical Engineering Technologists play a crucial role in designing the electrical systems for equipment used in manufacturing welding machines and consumables, ensuring that the production floor equipment adheres to corporate objectives related to safety, health, productivity, quality, and continuous improvement.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoAs an Electrical Engineering Technologist, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include:Modify solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives.Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance.Maintain, modify and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer.Update and support National Instruments LabVIEW code for testing applications and equipment.Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects.Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation.Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations.Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience.Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations.Integrate equipment into data collection systems and establish network topologies.Support network backup, device patching management, and control system asset inventory.Compile data from connected devices for organizational use and develop standards for control systems hardware and software.Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company’s 2025 Higher Standard Goals.Education & Experience RequirementsMinimum of a Bachelor's degree in Electrical Engineering Technology with 3+ years of professional experience.Experience with AutoCAD Electrical CAD software.Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW.Knowledge of NFPA 70, 70E, and 79, and other technical codes.Knowledge of basic networking concepts and SQL Database.SkillsDemonstrate initiative and accept responsibilities with minimal supervision.Strong ownership and results-driven mindset.Good judgment, self-motivation, and safety consciousness.Excellent organizational skills.Superior written and oral communication abilities.Adaptability to handle diverse assignments and changing priorities.Hands-on work capability and effective collaboration on the shop floor.Critical thinking and exceptional problem-solving skills.Proficiency in supporting and troubleshooting industrial equipment.Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required.Effective teamwork with employees at all organizational levels.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mentor Employment Status: Salary Full-Time Function: Engineering Req ID:26560 SummaryLincoln Electric is growing the Plant Engineering team and has outstanding opportunities for an experienced Electrical Engineer. Our Plant Engineering team is responsible for implementing capital projects and providing engineering support for the Consumable and Machine divisions of Cleveland Operations. Electrical Engineers play a crucial role in designing the electrical systems for equipment used in manufacturing welding machines and consumables, ensuring that the production floor equipment adheres to corporate objectives related to safety, health, productivity, quality, and continuous improvement.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoElectrical Engineers collaborate in a team environment to design and support industrial electrical systems. This includes various types of equipment new and old. Specifically, you will:Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives.Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance.Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer.Update and maintain National Instruments LabVIEW code for testing applications and equipment.Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects.Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation.Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations.Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience.Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations.Integrate equipment into data collection systems and establish network topologies.Support network backup, device patching management, and control system asset inventory.Compile data from connected devices for organizational use and develop standards for control systems hardware and software.Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company’s 2025 Higher Standard Goals.Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience RequirementsMinimum of a Bachelor's degree in Electrical Engineering with 3+ years of professional experience.Experience with AutoCAD Electrical CAD software.Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW.Knowledge of NFPA 70, 70E, and 79, and other technical codes.Knowledge of basic networking concepts and SQL Database.SkillsDemonstrate initiative and accept responsibilities with minimal supervision.Strong ownership and results-driven mindset.Good judgment, self-motivation, and safety consciousness.Excellent organizational skills.Superior written and oral communication abilities.Adaptability to handle diverse assignments and changing priorities.Hands-on work capability and effective collaboration on the shop floor.Critical thinking and exceptional problem-solving skills.Proficiency in supporting and troubleshooting industrial equipment.Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required.Effective teamwork with employees at all organizational levels.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mentor Employment Status: Salary Full-Time Function: Engineering Req ID:25583SummaryLincoln Electric is seeking a Mechanical Engineer for our Mentor, OH plant. The Mechanical Engineer with be a part of the Plant Engineering team. This team helps implements capital projects and provides engineering support for the Consumable and Machine divisions of the Cleveland Operations. Mechanical engineers are responsible for the mechanical aspects of the projects including facilities preparation, equipment designs and equipment installations. They also provide support for production and work on improvements to the existing equipment and facilities to improve health and safety, productivity, quality, and cost.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits!What You Will Do:Work in a team, hands on, environment on capital and strategic projects for the Cleveland Operation production facilities.Responsible for the mechanical aspects of the projects including facilities preparation, equipment design and equipment installation.Work on engineering solutions to improve equipment reliability and safety, lower operational and maintenance costs, and improve ergonomics.Engineer solutions that comply with ISO 14001 and EHS initiatives to improve the environmental & employee health & safety.Interface with all engineering, manufacturing and maintenance departments along with R&D, QA, and Supply Management to ensure accuracy of project design target details.Provide technical support to Production and Maintenance departments.Work with and often manage outside engineering and construction personnel.Ensure all safety, health, environmental, and compliance aspects for the project meet the appropriate regulations.Additional responsibilities as assigned by managers within the Plant Engineering department.Required Education & ExperienceBachelor degree in Mechanical Engineering.Minimum of 3+ years professional experience: Level II EngineerMinimum of 5+years professional experience: Level III EngineerMust have good judgment, be self-motivated and be safety conscious.Strong desire to take ownership and drive results.Ability to handle a variety of assignments and changing priorities.Ability to perform hands on work as required and work effectively on the shop floor with employees and processes.Ability to handle small to medium sized projects and day-to-day shop support with supervision.Experience with Solid Edge CAD modelling software is preferred.Knowledge of ISO 9001, ISO 14001, EPA and OSHA standards is preferred.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID:26350 SummaryLincoln Electric has an outstanding opportunity for a Plant Electrical Engineer supporting our Plant Engineering Facility Team. This team leads the implementation of capital projects and is responsible for planning, executing, and maintaining plant-wide infrastructure, as well as providing technical support for building and maintenance operations.As a Plant Engineer, you will play a pivotal role in supporting and executing projects across our manufacturing facilities in the Cleveland and Mentor areas. Your focus will be on identifying and solving technical challenges while ensuring that all equipment and processes align with the organization’s safety, health, quality, and productivity standards. This role offers an exciting opportunity to contribute to the sustainability and growth of our operations.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoCollaborate in a team environment to execute capital projects for manufacturing facilities in the Cleveland and Mentor areas.Take responsibility for the electrical aspects of projects, which may include design, documentation, equipment installation, project management, and support.Develop engineering solutions to improve equipment reliability and safety, reduce operating and maintenance costs, and effectively manage outage risks.Create and maintain sustainable documentation for use by engineering and maintenance teams.Design solutions that comply with ISO 14001 and Environmental Health and Safety (EHS) initiatives to enhance environmental and employee health and safety standards.Provide capital cost estimates and establish project timelines to ensure successful completion of project work.Review equipment quotations to confirm compliance with desired specifications.Deliver technical support to the Production and Maintenance departments.Coordinate and interface with engineering, production, maintenance, and procurement teams.Work closely with and often manage outside engineering and construction personnel.Ensure all safety, health, environmental, and compliance requirements adhere to the appropriate regulations.Perform additional responsibilities as assigned by managers within the Plant Engineering department.Education & Experience RequirementsFor level II: Bachelor’s degree in Electrical Engineering with a minimum of 3 years of experience.For level III:Bachelor’s degree in Electrical Engineering with a minimum of 5 years of experience.Strong desire to take ownership of tasks and deliver results.Excellent problem-solving and troubleshooting abilities.Demonstrates good judgment, self-motivation, and a commitment to safety.Proven ability to manage multiple tasks, prioritize work effectively, and meet deadlines.Flexibility to handle diverse assignments and adapt to changing priorities.Capability to perform hands-on work when needed and work collaboratively on the shop floor with employees and processes.Knowledge of NEC, NFPA, 70E, NFPA 79, and other technical codes.Experience with 2D CAD modeling; familiarity with AutoCAD/Vault is preferred.Willingness to occasionally work off shifts, travel between facilities in Northeast Ohio, and travel as required.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.