We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

If you are currently an employee of Herc Rentals, please apply using this link:Herc Employee Career PortalFounded in 1965, Herc Rentals is one of the leading equipment rental suppliers in North America with 2024 total revenues reaching approximately $3.6 billion. Herc Rentals’ parent company, known as Herc Holdings Inc., listed on the New York Stock Exchange on July 1, 2016, under the symbol “HRI.” Herc Rentals serves customers through approximately 450+ locations and has about 7,600 employees in North America as of March 31, 2025.Job PurposeAs a Field Service Mechanic A, you are a master technician and will assume a leadership role in product knowledge and standards of quality within the branch. You will serve as a go-to resource for utilizing your mechanical expertise to ensure Herc fleet remain in proper operating condition on our customer jobsites, at all times. Field Service Mechanics are dispatched to local jobsites at various times of the day and work independently without direct supervision. This provides the opportunity to build positive relationships with customers all while supporting the growth and improvement of your community.What you will do...Develop and maintain a consistent schedule of performing preventative maintenance of all Herc owned fleet at long term customer job sitesOversee and conduct oil changes, lubrication of equipment, tire replacements, hose repairs, battery replacements and assorted servicesDiagnose and repair heavy equipment as required to ensure proper operating condition at the job siteDiagnose and troubleshoot fuel systems, electrical systems, hydraulic systems and propane systemsRecondition and replace assorted parts to return equipment to a safely functioning stateEducating customers on proper use of equipment to avoid future breakdownsAnalyze problem areas for any significant wear or tear and address to ensure proper usage of the equipment until your next scheduled visit Adhere to all safety guidelines posted at active jobsite where repairs and maintenance are completedMaintain work area on jobsite in a clean and organized mannerProduce timely and detailed service reports and repair logsFollow all company’s filed procedures and protocolsBuild positive relationships with customersPerform additional duties as assignedRequirementsHighschool diploma or equivalentAbility to operate and test equipment such as boom lifts, forklifts, compressors, portable and stationary generators, hydraulics, pumps and assorted tools and equipmentAbility to understand detailed technical schematics, owner manuals, and product warning labelsOwnership of sufficient selection of hand and air/electric tools to complete most repairs and servicesAbility to be on call to support operational needsA valid driver’s licenseSkillsAbility to drive/operate multiple types of vehicles and equipmentAbility to follow up with customers in a timely mannerAbility to handle assorted tools properly and safelyAbility to safely lift up to 50 LBsAttention to detailCustomer service skills to naturally converse with jobsite foremanFlexibility to adapt to changing needs on an active jobsiteInterpersonal skills to communicate effectively and efficientlyMust possess solid written and verbal communication skills and be able to perform basic computer operations such as opening and closing work ordersSolid and proven computer skill set to enter work ordersUnderstanding the importance of time managementWorks and communicates effectively with all levels of the companyReq #: 61356Pay Range:$30-$32 + $5k Sign-On BonusPlease be advised that the actual salary offered for any position is subject to the company's sole discretion and may be influenced by various factors, including but not limited to the candidate's qualifications, experience, location, and overall fit for the role.Herc Rentals values its employees and provides excellent compensation and benefits packages which are not limited to the following.Keeping you healthyMedical, Dental, and Vision CoverageLife and disability insuranceFlex spending and health savings accountsVirtual Health Visits24 Hour Nurse LineHealthy Pregnancy ProgramTobacco Cessation ProgramWeight Loss ProgramBuilding Your Financial Future401(k) plan with company matchEmployee Stock Purchase ProgramLife & Work HarmonyPaid Time Off (Holidays, Vacations, Sick Days)Paid parental leave.Military leave & support for those in the National Guard and ReservesEmployee Assistance Program (EAP)Adoption Assistance Reimbursement ProgramTuition Reimbursement ProgramAuto & Home Insurance DiscountsProtecting You & Your FamilyCompany Paid Life InsuranceSupplemental Life InsuranceAccidental Death & Dismemberment InsuranceCompany Paid Disability InsuranceSupplemental Disability InsuranceGroup Legal PlanCritical Illness InsuranceAccident InsuranceHerc does not discriminate in employment based on the basis of race, creed, color, religion, sex, age, disability, national origin, marital status, sexual orientation, citizenship status, political affiliation, parental status, military service, or other non-merit factors. #Appcast

Overview:Tire Technician – Part-Time – Powell RoadDiscount Tire190 Hornbeam LaneLewis Center,Ohio43035OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Scale $15.50-$16.50Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.Responsibilities:#discounttire12

Job InfoJob Location: Heath, OHRoute Type: LocalType of Assignment: Direct HireHours Per Shift: 8 HoursHours Per Week: 40 HoursShift Start Time: 07:00 amWorking Days: Mon-FriTransmission Type: AutomaticJob RequirementsAdditional InformationDiesel Technician |Heath, OHJob Type: Full-TimePay Rate: $24 - $30 Per HourEstimated Weekly Pay: $1,000 - $1,200Schedule:Monday - Friday - 07:00 am - 03:00 pmOverview:Join our team as a diesel tech 2, for Carvana in Heath, OHKey Responsibilities:Diagnose (using diagnostic equipment) and perform general preventative maintenance and DVIR for all heavy equipmentPerform scheduled repairs and resolve issues uncovered during inspectionChanging brakes, Adjusting steering systems, replacing parts, fixing complex electrical issues, changing hydraulic components, changing tires according to TIA guidelinesUse welders, torches and plasma cutters to weld or fabricate broken partsMaintain accurate and proper records for all repairs performed on our fleet using our softwareUse diagnostic equipment to pull fault codes and follow OEM diagnose trees to accurately diagnose equipmentRequirements:1+ year experience with class 8Must have a Valid Driver's LicenseMust have your own tools to complete daily tasks, specialty tools will be provided by CarvanaTypes of tools required: Sockets, wrenches, screw driversOUTDOOR ShopRequires standing for extended periods of time with frequent stretching, reaching, walking and stooping/pushing and/or pulling in an environment that be cold, hot, noisy & wet & may have fumes or odors due to vehicle maintenanceMust be able to carry and transport up to 60 pounds up to 20 feetAbility to communicate and interact with others effectively and in a professional courteous mannerAbility to multitask and prioritize effectivelyAbility to communicate clearly and concisely both written and oralBenefits:Health insurance (100% of employee premiums, 75% family premiums)Dental & vision insurancePTO (104 hours in the first year, 160 hours after)401(k) with company matchTool allowance of $500/year, boot allowance of $100 every 6 monthsUniform & laptop providedASE certifications reimbursedApply now or call your local recruiter Aidan @ext 650

Req ID:461591Address: 9901 Schuster Way Etna, OH, 43018Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Paid Time Off • Health Benefits Day One • 401K Match • No Travel At Bath & Body Works, everyone belongs. We are committed to creating a diverse, equitable and inclusive culture focused on delivering exceptional fragrances and experiences to our customers. We focus on recruiting, retaining, and advancing diverse talent where our associate population is as diverse as the communities we serve, live and work. In addition, we work to improve our communities and our planet in a way that will make us proud for years to come because we believe the world is a brighter, happier place when everyone has access to the things that make them happy.Summary The Maintenance Technician can perform a wide variety of work to ensure that the facilities and equipment are maintained in safe and effective working conditions. Responsibilities include but are not limited to, performing work in all operational and Facilities areas, depending upon the immediate needs of the department. While Maintenance Technicians may have developed skills in one or more areas, all are expected to be able to perform general maintenance and repair in all areas of assignment, which may include equipment, motor, and conveyor repair and maintenance as well as building maintenance including lighting, electrical, and plumbing in any of the distribution centers. Responsibilities Ability to read and comprehend technical manuals, schematics, and blueprintsAbility to use electrical diagnostic equipment (to include digital and analog meters, and amp meters for AC/DC testing)Ability to work as a team member by interacting and communicating with co-workers and managers in a collaborative and constructive mannerWorks with Supervisor to mentor/develop team and Tech's in trainingWork with Vendors aligned to facilitiesAbility to multi-taskAbility to change load wheels on power equipmentAbility to troubleshoot and repair low and high voltage controls including fuses, relays, wiringMaintains building, equipment, shop, and storage areas in a clean and orderly conditionCompletes work orders for work performed and includes parts and inventory usedDocument all work order activities to comply with MP2 requirements, providing documented records of the activities performedFollow lockout-tag-out procedures, confined space procedures, and other safety and environmental procedures and policies as requiredExperience working in maintenance in a distribution center settingBuilding conveyor maintenance experience requiredQualifications & Experience Possession of a valid driver's license and a satisfactory driving recordPrior maintenance experience with forklifts, conveyors, controls, hydraulics, pneumatics and building maintenanceElectrical experience with high and low voltage, AC and DCAbility to lift 70 pounds.Technical school or training desiredComputer skills navigating email/Microsoft SuiteKnowledge of mechanical and electrical drawingsProven track record of strong mechanical and electrical troubleshootingWelding skill preferred, but not required Education Possession of a high school diploma or general equivalency diploma (GED) Core Competencies Lead with Curiosity & HumilityBuild High-Performing Teams for Today & TomorrowInfluence & Inspire with Vision & PurposeObserve, Engage & ConnectStrive to Achieve Operational ExcellenceDeliver Business ResultsBenefits We invite you to join Gingham Nation, where we invest in our associates through competitive compensation, benefits, and development opportunities, so they can continue to be their best at work, at home, and in their communities. Benefits offered to our eligible associates include a no cost mental health and well-being program, health coverage with a variety of plans to choose from, flexible and affordable saving programs, paid time off and a merchandise discount. Visit bbwbenefits.com for details. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We are an equal opportunity and affirmative action employer We do not make employment decisions based on an individual's race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States. Application window will close when all role(s) are filled.

RESIDENTIAL MAINTENANCE TECHNICIAN-PROPERTY MANAGEMENT Company Vehicle Provided When you join VineBrook Homes, LLC. you join a diverse and growing team of talented professionals who are changing the property management industry. VineBrook is an internally managed real estate company specializing in acquiring, renovating, and leasing single family homes. We take a different approach, focusing on affordability and value for our residents. VineBrook has built a culture of people committed to ensuring a world class resident experience. We are united around a desire for excellence and innovation. Unified by our mission, we are developers, creators, designers, managers, technicians, and most importantly leaders. Each of us is a trailblazer with a tremendous opportunity to have a positive impact on the lives of our valuable residents. Since our commencement in 2007, we have quickly become one of the largest providers of quality rental homes. We are currently seeking a qualified residential Maintenance Technician to perform maintenance on single family homes. Successful candidates will be hard working, reliable, ability to work independently or as a team. We are seeking candidates who desire a long term career opportunity with a successful company in the residential services industry. SUMMARY Residential Maintenance Technicians are responsible for the upkeep and repair of our properties. They must be able to work unsupervised while performing quality repairs to HVAC, electrical, and plumbing systems. They must be able to diagnose and troubleshoot problems. Customer service is very important and must be displayed at all times. Documentation is done via smart devices such as provided smartphones and tablets. REQUIRED EDUCATION AND EXPERIENCE ·High school diploma or equivalent. ·HVAC Certification preferred but not required ·2-5 years' experience in the maintenance field. ·Proficient at using a smartphone and computer. ADDITIONAL REQUIREMENTS ·Must have own tools, we provide larger/specialized equipment. ·Valid Driver's License. ·Pass a Motor Vehicle, Drug Screen, Credit, and Criminal Background Check. ADDITIONAL INFORMATION/BENEFITS ·We offer paid PTO, Health insurance, Life insurance, Supplemental Insurance, Dental and Vision coverage, as well as a 401(k) with matching and paid time off. ·We are an equal opportunity employer OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. We recognize that people come with a wealth of experience and talent beyond just the technical requirements of the job. If your experience is close to what you see listed here, please still consider applying. Diversity of experience and skills combined with passion is a key to innovation and excellence; therefore, we encourage people from all backgrounds to apply to our positions. Please let us know if you require accommodations during the interview process. VineBrook Homes LLC (“VineBrook”) is proud to be an equal opportunity employer that is committed to diversity and inclusion in the workplace. VineBrook considers all applicants for employment without regard to race, color, sex, sexual orientation, gender, gender identity, age, religion, national origin, pregnancy, child or spousal support withholding, disability, marital status, genetic information, citizenship/immigration status, military/veteran status, or any other status protected by federal, state, or local law. VineBrook makes hiring decisions based solely on qualifications, merits and business needs at the time. Upon request, VineBrook will reasonably accommodate applicants with a disability who need accommodation during the application process, unless accommodation creates an undue hardship to the company. We are also a Drug Free Workplace. As permitted by law, qualified applicants will also be required to pass a drug screening before beginning employment. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

1st Shift: 7:00am-3:30pm 2nd Shift: 2:30pm-11:00pm In this role, you'll be responsible for analyzing, troubleshooting, and repairing electronic equipment down to the component and board level. Key tasks include circuit analysis, fault isolation, signal tracing, and soldering both through-hole and surface-mounted components. You'll use tools such as multimeters, oscilloscopes, and signal generators while applying a strong understanding of electronic fundamentals, logic, and schematics. The ideal candidate has a high school diploma, strong technical comprehension, and troubleshooting skills, with the ability to work independently. Experience with clean room environments and ESD protection, along with A+ and IPC certifications, is preferred.What You'll Do: Analyze, troubleshoot, and repair electronic equipment Troubleshoot at the component level, resolve integration issues Perform circuit analysis, waveform calculations, fault isolation, prom programming, and signal flow tracing Utilize knowledge of electronics and digital components Apply skills in electronic fundamentals and logic Read and interpret schematics and blueprints Perform through hole and surface soldering Operate and interpret measurements from multi meters, oscilloscopes, and signal generators-analyzers Troubleshoot electronics devices at the board level What We're Looking For: High School Diploma required Ability to read and interpret technical documents accurately Strong troubleshooting skills and fault isolation Ability to work independently Familiarity with clean room environments and ESD protection preferred A+ and IPC certifications preferred Willingness to work occasional non-standard hours or overtime Key SkillsWhat's In It For You Elective Benefits: Our programs are tailored to your country to best accommodate your lifestyle.Grow Your Career: Accelerate your path to success (and keep up with the future) with formal programs on leadership and professional development, and many more on-demand courses.Elevate Your Personal Well-Being: Boost your financial, physical, and mental well-being through seminars, events, and our global Life Empowerment Assistance Program.Diversity, Equity & Inclusion: It's not just a phrase to us; valuing every voice is how we succeed. Join us in celebrating our global diversity through inclusive education, meaningful peer-to-peer conversations, and equitable growth and development opportunities.Make the Most of our Global Organization: Network with other new co-workers within your first 30 days through our onboarding program.Connect with Your Community: Participate in internal, peer-led inclusive communities and activities, including business resource groups, local volunteering events, and more environmental and social initiatives.Don't meet every single requirement Apply anyway. At Shyft Global Services, a TD SYNNEX Company, we're proud to be recognized as a great place to work and a leader in the promotion and practice of diversity, equity and inclusion. If you're excited about working for our company and believe you're a good fit for this role, we encourage you to apply. You may be exactly the person we're looking for!We are an equal opportunity employer and committed to building a team that represents and empowers a variety of backgrounds, perspectives, and skills. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, gender, gender identity or expression, sexual orientation, protected veteran status, disability, genetics, age, or any other characteristic protected by law.

Come join our team as a Plumber I! We’re currently looking for Plumber I candidates. The position of Plumber I is critical to learning the plumbing trade and steadily improving both quality and speed over time. RESPONSIBILITIES Studiously learn the necessary aspects of drain, waste, vent (DWV), water systems, and other aspects including but not limited to setting of tubs and installation of plumbing fittings and fixtures.Accurately build and install complete plumbing systems showcasing a clear understanding of all types of plumbing fittings.Ensure adherence to safety and quality of work standards.Deliberately manage materials needed for various projects.Steadily accumulate knowledge of basic tools required for plumbing work (soldering, cutting, and notching) and be able to put that knowledge into use within thirty (30) days.Precisely and regularly maintain a clean and organized jobsite.Thoughtfully follow directions and processes given by site leadership.Enthusiastically motivated to learn the plumbing trade.Maintain compliance with state trade licensing programs.Build knowledge of Plumbing Code.Maintain excellent attendance and punctuality to adhere to work schedule. QUALIFICATIONS Motivated work ethic.Clear verbal communication skills.Basic mathematical ability including addition, subtraction, multiplication, and division.Ability to read, write, and interpret reports and documents such as safety rules, operating instructions, procedure manual, and blueprints / CAD drawings.Critical thinking skills and ability to problem solve independently.A high school diploma or GED is required.Valid driver license is required.Obtain apprentice licensing in appropriate states.Exposed to outdoor weather conditions including rain, humidity, snow, wind, cold, and heat.The environment may include very loud noises, working near mechanical and moving parts, working at various heights, and small, awkward, confining workspaces.There is the possibility of inhalation of fumes and airborne particles as well as the risk of electrical shock and vibrations.Must be able to do the following activities for most of the workday: stand, walk, use hands or fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, see, talk, and hear.Must be able to climb or balance regularly.Near constant lifting or carrying of items of various weights, typically up to 10 pounds most of the day. Capable of lifting at least 50 pounds on occasion.Manual dexterity sufficient to reach/handle items, work with the fingers, and perceive attributes of objects and materials.Wear job site-specific personal protective equipment and be able to lift at least 50 pounds.Possible travel to out of town/out of state projects SCHEDULE: Monday to Friday LOCATION: On-site SALARY: $18-$26 hourly BENEFITS MedicalDentalVisionShort- & long-term disabilityAccrued PTOPaid holidays401(K)Profit sharing It’s time to join the team at R.T. Moore, a mid-size mechanical contractor company where you are more than a number. Here everyone is treated with respect, and leadership cares about you as a person and listens to your input. Plus enjoy a steady Monday-Friday schedule, with no nights or weekends! Ready to get Moore Check us out at www.rtmoore.com to join one of the largest mechanical contractors in the nation! R.T. Moore is an Equal Opportunity EmployerEqual Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Does this position interest you You should apply –even if you don’t match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work.Do you like to be challenged Have natural mechanical ability Work independently, but also as part of a team with opportunities for growth and advancement Join Safelite as an Auto Glass Technician Trainee the first step in becoming a certified auto glass technician on a nationally recognized team of expert installers! We’ll train you to install and repair auto glass, recalibrate car safety systems and provide service so great, it’s memorable. And you’ll get paid to learn it all!We’re more than just a glass company. We empower our associates with the support they need to be efficient, to problem-solve and have an eye for detail, and most importantly, to deliver quality service and bring a little unexpected happiness to people’s lives.This isn’t your typical desk job! You’ll be outdoors, working with your hands, and yes, that means working in an ever-changing environment with all sorts of weather conditions.It’s time to start that new career you’ve been thinking about. Invest in yourself and learn more about our 3-month paid training program. Once on the job, your pay is evaluated every six months to ensure you’re rewarded for outstanding performance!Shop located at: 6826 Sawmill Rd, Columbus, OH 43235As a Technician Trainee you will: Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including:Installing and repairing auto glassRecalibrating automotive safety systemsProviding additional services & productsStudy and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques.Safely operate a company vehicle and company-issued tools utilized throughout the workday.What you’ll get:Competitive weekly pay starting at $22/hour, increasing to $23/hour after training and certification.Earn $5/set of wiper blades when added for customer safety.Potential to be promoted in your first year! Earn up to $28/hour as a Senior Tech & up to $30/hour as a Master Tech. Technician career levels determined based on performance metrics demonstrating efficiency, quality, and customer satisfaction.A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days.Program to buy additional PTO or sell unused time up to 16 hours.Up to $5,250 annually in tuition reimbursement.Paid training and all the tools and resources you'll need to be successful.View all our health, wealth, and life offerings at www.safelitebenefits.com.What you’ll need: (Not sure if you meet all the requirements We encourage you to apply!)Must be 18 years of age or olderValid state-issued driver’s license requiredComfortable working outside (in a wide variety of weather conditions) on your feet for extended periodsAbility to work scheduled days, with flexibility on start and end times to accommodate customer’s needsAbility to regularly lift up to 35 pounds and occasionally lift up to 50 poundsHigh school diploma/GED/equivalent preferred; ability to read & write--Internal Associates: Already a member of the Safelite team Apply through your Workday account by searching 'Find Open Jobs'.Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Safelite.com/Careers.Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment.This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws and regulations and with Safelite Group, Inc. policies and practices.--

Overview: Come join Buckeye - one of the best HVAC and Plumbing companies in Ohio! How did we get here in such a short period of time We keep on growing because we only hire the best (that's YOU) and our client's love us for it! People often come to us looking for a job. They stay with us because they find a fulfilling career, room to grow, and opportunities to excel.The RoleYou will diagnose and repair heating and cooling systems and lead customers to informed and confident buying decisions by providing an extraordinary customer experience.What’s In It For Me Industry Leading Total Compensation Plans$75,000-$150,000 per yearMedical (as low as $1), Dental and Vision InsuranceFREE Employee/Dependent Telehealth, no copayCompany Matched Health Savings Account and 401k Retirement AccountFREE Long-Term Disability Insurance, Employee + Family Life Insurance, Wellness Program and Employee Assistance Program (Mental Health)Voluntary Short-Term Disability Insurance, Accident Insurance and Critical Illness InsurancePaid Company HolidaysPaid Community Service DayCompany Paid Personal Time Off (Up to 4 Weeks)Company Paid Other Time Off (Bereavement & Jury Duty)Friends & Family DiscountIndustry Leading Training Programs Qualifications: Do I Have What it Takes Valid driver’s license to drive company vehicle.Pass EPA 608 Certification Type 1 & 2.Service Titan experience preferred.Nate Certifications: Core and 2 specialties. (preferred)Minimum of 2 years of troubleshooting and repair experience. Have basic industry toolsEQUAL EMPLOYMENT OPPORTUNITYWrench Group and its affiliates are proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, genetic information, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics.The companyencourages allqualified candidates who are eligible to work in the United States to apply, but it does not sponsor applicants or employees who require a visa to work legally. Responsibilities: What Will I Do Complete all assigned work (service, tune-ups, inspections) in a complete, safe, and professional manner.Courteously take work direction from the dispatcher.Fill out all service invoices with 100% accuracy.Complete closeout process with 100% accuracy immediately upon completion of job.Maintain communication with internal teams.Keep your company truck clean, inside and out.Properly complete required paperwork.Participate in training allowing you to grow and develop as a professional.Available to be on-call for service rotation

Company Description: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere.At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown’s history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them.From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward.We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team.Want to Learn More Watch A Day in the Life of a Crown Field Service Technician! click here.External Title: Mechanic - Field ServiceInternal Title:Field Service TechnicianThis position is based out ofthe Columbus, Ohio branch and will provide support to Groveport, Columbus, Ohio and surrounding areas.Job Responsibilities:Troubleshoot, diagnose and repair Crown and all other makes of lift trucks.Perform all assigned planned maintenance on customer lift trucks.Maintain a service vehicle and it's inventory.Process paperwork after completion of each job.Qualifications:High school diploma or equivalent.Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics.Good written/verbal communication and customer care skills.Valid driver's license, good driving record, and ability to safely operate lift trucks.Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred.The pay range for this posirtion is $23.85 to $35.35 per hourWork Authorization:Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire.No agency calls please.Compensation and Benefits:Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more.Crown also offers Service Technicians:Award-Winning Service TrainingCompany Vehicle for Field Service TechniciansTool InsuranceNo Flat Rate40 Hours Per Week plus OvertimeUniformsSpecialty ToolsPrimarily 1st ShiftCareer Advancement OpportunitiesEOE Veterans/Disabilities

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!LocationRaymond, OhioJob PurposeSupport NA regional manufacturing Line Control system (GALC) as a business system expert by supporting the development and direction of system strategy, standardization and diffusion across all North American manufacturing plants ensuring robust, repeatable, and controlled processes are in place to maximize business value and support plant characteristics enhancement.Key AccountabilitiesSupport the development and implementation of strategies including plans & targets to standardize, improve the business operating capabilities of the GALC system for the region.Lead projects/themes of limited complexity and scope through collaboration with team (plant, IT, regional engineering) including current system enhancements and feasibility studies for future products.Work effectively with local plant departments and regional IT to ensure system standards are created, documented, and sustainedComplete testing, verification, and documentation of system changes. Confirm system requirements are met during appropriate UAT timing and assure countermeasure application on system before change release.Participate in the development of a standard training program for system use and deliver when requiredQualifications, Experience and SkillsBachelors degree related to process, manufacturing management, industrial or systems engineering or required experience2+ years' experience in Process Engineering or Manufacturing Systems with a focus on the automotive industrySystems technology experience, knowledge of process engineering, business analysis skills, project management, process project design & implementation, change management, MS Office. WorkstyleHybrid position, preferred Ohio site90% office, 10% production floor (go to the spot)Travel to plant or special assignmentWhat differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

WHY MAPLE STREETBISCUIT COMPANYAt Maple Street, our mission is simple: Help People, Serve Others, Be a Part of the Community. We take pride in our food, but above all, we take pride in our communitystarting with our team. Our Maple Street Team Members are the foundation of our culture, so we’re committed to providing them with a great work environment and opportunities to grow with us. Whether you like to spend time interacting with our guests or showing off your culinary skills, you’ll enjoy opportunities to showcase your talent and have plenty of room to grow.Grow your communityand grow with us.WHAT YOU’LL DO | THE OPPORTUNITYWe know you want to start your day right, so start it with us. Whether you’re scratch-making our one-of-a-kind flaky biscuits or adding the final touches to each delicious dish that goes out, you’ll have a hand in creating an inspirational culinary experience for each guest! No matter where your experience lies, we’ll provide the training you need to thrive. The best part We close after lunch, so Maple Street has no night shifts!WHAT YOU’LL NEEDAbility to thrive within a collaborative environmentA genuine passion for serving your communityThe desire for personal and professional developmentWHAT’S IN IT FOR YOUMedical insurance eligibility on day 1Weekly pay and same-day pay accessFree meal every shift35% team member discount on food and retailNo night shiftsCommunity involvementABOUT USOur mission is this: Help People, Serve Others, Be a Part of the Community. We mean this in the context of our community-facing stores and our guests, but we also mean this in terms of our internal community.We are serious about providing our team members with opportunities to grow with us. From our Ambassadors and Baristas all the way up to our Community Leaders (that’s what we call our store managers – are you sensing a theme ), our team works hard to train, encourage, and uplift one another so that your time here as one of the Maple Street crew becomes a valuable part of your identity.BECOME A PART OF OUR COMMUNITY. APPLY NOW!We are an equal opportunity employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Securitas Technology Corporation, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services.Wecurrently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesServices intrusion, fire, CCTV, and access control security systems.Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order.Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs.Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operationalMay plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installationsPresents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology.Attends and completes training programs as requested.Minimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systems preferredA thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems, fir alarm and life safety systemsNICET Certification preferredLenel, Pro-Watch, Software House, Picture Perfect certifications preferredClimb ladders that extend up to 24 ft. in heightsCarry items up to 75 poundsAbility to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.Bosch, Honeywell, Radionics, or DMP system knowledge preferredWorking knowledge IP addressing equipmentSecuritas offers comprehensive benefits includingHighly competitive salaryCompany VehicleCompany Cell PhoneOpportunity for annual merit pay increases.Paid company trainingMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday, and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Summary of Job Description:The Maintenance Mechanic supports operation, inspection, and maintenance processes to mechanical, electrical, plumbing and kitchen equipment and systems in assigned facilities. Assists Mobile Engineers (HVAC/R) and Control Systems Technicians in maintenance and repair efforts, as well as independently performing defined tasks.Primary Responsibilities:Maintain lighting system bulbs and ballastsAssist the operations team in the maintenance and repair of building and equipmentGeneral interior maintenance – HVAC/R coil cleaning, evaporator coil cleaning, kitchen equipment maintenance (meat grinder, cuber, meat saw, slicers, etc.).Minor plumbing repairsCompletes special tasks that include but are not limited to; painting, locksmith work, tenant services requests, and general maintenance as assigned.This position requires the employee to be on call for after-hours emergencies.Comply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize danger and safety hazards and propose methods to eliminate them.Maintain compliance to State, County, or City Ordinances, Codes, or Laws.Complies with all policies for the safe storage, usage and disposal of hazardous materials.Participate in ongoing technical, safety, and operational process training programsMaintains a clean and safe work environment.Documents work performance and materials procurement as directed.Other assigned operational tasks as may be typically expected of the Maintenance Mechanic role.Qualifications:Candidate must possess and maintain a valid state driver’s license.Completion of an applicable technical training program is desirable, have a minimum of one (1) year of applicable working experience in general building repair and maintenance, basic plumbing, and basic electrical.Must have ability to lift a minimum of 80 lbs., use ladders up to 30 ft, and possess mechanical and electrical aptitude.Position requires frequent climbing, bending, kneeling, lifting, and driving.Position requires excellent communication skills in English, both oral and written.Candidate will be provided with tools required to perform assigned work scope.High school diploma or GED equivalentAbility to comply with both Jones Lang LaSalle and client-directed Policies & Procedures.Successful candidate must be a self-motivated individual who can work independently or in a team environment.Please note: All resumes must be submitted via our Web site.Applicants are considered regardless of race, color, religion, creed, age, sex, pregnancy, family responsibility, national origin or ancestry, citizenship, marital status, sexual orientation, transgender status, veteran’s status, genetic information, or status as a qualified individual with a disability or any other protected characteristic in accordance with applicable law.

REM Community Services, a part of the Sevita family, provides community-based services for individuals with intellectual and developmental disabilities. Here we believe every person has the right to live well, and everyone deserves to have a fulfilling career. You’ll join a mission-driven team and create relationships that motivate us all every day. Join us today, and experience a career well lived.This position will assist in Mt. Vernon and Loudonville areas Starting wage is $18.10 hourly Maintenance Worker As a Handyman/Maintenance Worker, you will ensure all grounds and equipment are in good working order to maintain a safe, attractive, and enjoyable living and working environment for the individuals we serve. Oversee ongoing preventative maintenance of multiple programs/offices across an assigned region.Plan and schedule work assignments to accomplish workload with available resources and equipment. Coordinate with outside contractors to ensure quality of work delivered. Analyze and resolve complaints pertaining to services, and equipment in area of responsibility.Communicate departmental procedures for maintenance and operation of buildings. Maintain the building and grounds in compliance with Federal, State, and local laws.Repair and maintain kitchen, housekeeping, and other mechanical equipment, including heating and air conditioning units, electrical/plumbing fixtures, painting, and laundry equipment.Draft plans for building needs. Read blueprints and implement work accordingly. Wire buildings for computer networking. Inspect and repair all damages to building surfaces.Plan and direct inventory control program for equipment, parts, and supplies. Oversee the establishment of accounts with material vendors. Order and maintain necessary maintenance supplies.Maintain appliance motors, room exhaust fans, pumps and miscellaneous equipment on a monthly basis or as recommended by the manufacturer.Work with building inspectors, fire marshals, and vendors. Maintain fire alarm system, including smoke and heat detectors, and fire pull. Assist with safety and disaster plans as appropriate.Maintain operational records, data, and monitor and enforce observance of safety regulations.Perform other related duties and activities as required. Qualifications: High school diploma or equivalentOne year related experienceWorking knowledge and ability to handle all maintenance and electrical equipmentCurrent contractor license as required by stateValid Driver's license and access to a registered vehicle with proof of insurance requiredExperience with IDD/Long term Care Facility environment preferred Why Join Us Full compensation/benefits package401(k) with company match.Paid time off and holiday pay.Rewarding, complex work adding value to the organization’s mission alongside a great team of co-workers.Enjoy job security with nationwide career development and advancement opportunities. We have meaningful work for you – come join our team – Apply Today! Sevita is a leading provider of home and community-based specialized health care. We believe that everyone deserves to live a full, more independent life. We provide people with quality services and individualized supports that lead to growth and independence, regardless of the physical, intellectual, or behavioral challenges they face. We’ve made this our mission for more than 50 years. And today, our 40,000 team members continue to innovate and enhance care for the 50,000 individuals we serve all over the U.S. As an equal opportunity employer, we do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, citizenship, or any other characteristic protected by law.

SierraAt TJX Companies, every day brings new opportunities for growth, exploration, and achievement. You’ll be part of our vibrant team that embraces diversity, fosters collaboration, and prioritizes your development. Whether you’re working in our four global Home Offices, Distribution Centers or Retail Stores—TJ Maxx, Marshalls, Homegoods, Homesense, Sierra, Winners, and TK Maxx, you’ll find abundant opportunities to learn, thrive, and make an impact. Come join our TJX family—a Fortune 100 company and the world’s leading off-price retailer.Job Description:This position has a starting pay range of $24.10 to $41.00 per hour. Actual starting pay is determined by a number of factors, including relevant skills, qualifications, and experience.This is a position that requires special skills and / or schooling. These skills require technical training in HVAC, Electrical, Mechanical, Carpentry, Metalworking and applications, Plumbing, Conveyors and Electric forklifts. Qualified candidates must possess skills in a minimum of two of these areas and must be able to read and understand schematics and possess troubleshooting skills. The pay for this position is established by the specific skills required and the amount of training and experience that the individual possesses and is not altered by the probationary period.Must have a valid driver’s licenseMust be a self-starterAble to work with little supervision or unsupervised at timesKnowledgeable in small repairs and advance technical skillsCarpentry skillsMust be flexible and be able to multi-task as projects are frequently interrupted due to a priority basisPrior experience in the maintenance field mandatoryPhysically capable of lifting up to 60 poundsCapable of understanding what needs to be done and doing it quicklyMust be clean, organized and tidyTroubleshooting and problem solvingFabricate materials and build itemsMust be mechanically inclinedAble to use a multi meter to check circuitsCapable of handling on call issues and respond to themBenefits include Associate discount; 401(k) match; medical/dental/vision; HSA; health care FSA; life insurance; short/long-term disability; paid holidays/vacation /sick/bereavement/parental leave; EAP; incentive programs for management; auto/home insurance discounts; tuition reimbursement; scholarship program; adoption/surrogacy assistance; smoking cessation; child care/cell phone discounts; pet/legal insurance; credit union; referral bonuses. All benefits are subject to applicable plan or program terms (including eligibility terms) and may change from time to time. Contact your TJX representative for more information.Benefits include Associate discount; 401(k) match; medical/dental/vision; HSA; health care FSA; life insurance; short/long-term disability; paid holidays/vacation /sick/bereavement/parental leave; EAP; incentive programs for management; auto/home insurance discounts; tuition reimbursement; scholarship program; adoption/surrogacy assistance; smoking cessation; child care/cell phone discounts; pet/legal insurance; credit union; referral bonuses. All benefits are subject to applicable plan or program terms (including eligibility terms) and may change from time to time. Contact your TJX representative for more information.In addition to our open door policy and supportive work environment, we also strive to provide a competitive salary and benefits package. TJX considers all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status, or based on any individual's status in any group or class protected by applicable federal, state, or local law. TJX also provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.Address:4077 Airbase RdLocation:USA Sierra 3PL Ashville CampusThis position has a starting pay range of $24.60 to $33.20 per hour. Actual starting pay is determined by a number of factors, including relevant skills, qualifications, and experience.

About the RoleAs a Maintenance Technician, you will promote workplace efficiency and profitability by maintaining, inspecting and repairing facilities, equipment and machinery. What You’ll DoDaily inspection and repair of all conveyor systems and equipmentRoutine inspection, preventative maintenance and maintenance of air compressors, generators, compactors, bailers, conveyors and power and material handling equipmentPerform inspection and repair of fire protection equipmentParts administrationPerform minor electrical and plumbing repairs, painting and office furniture movesPerform routine maintenance on heating and air conditioning unitsMaintain lighting throughout the facilitySort, stack and load pallets, cardboard, aluminum, steel and light bulbs for recyclingAssist outside contractors in performing various dutiesPromptly answer calls for jams, malfunctions or other maintenance-related issuesWhat Skills You HaveRequiredBasic knowledge of mechanical, electrical, plumbing and HVAC equipmentCompliance with all MSDS standards and lock-out/tag proceduresAbility to climb ladders and run all power equipmentAbility to work with minimal supervisionMust provide own basic set of toolsAbility to use cleaning and disinfecting solutions, oil and equipment according to MSDS procedure

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:UPS is currently seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. He/She will maintain a diverse range of equipment including delivery vehicles, heavy duty on road tractors and trailers from a variety of manufacturers. Powered vehicle propulsion includes diesel, gasoline and alternative technology power plants (including compressed natural gas, liquefied natural gas, propane, hybrid and electrical in some locations). Automotive Technicians must be skilled in troubleshooting and maintaining various systems including hydraulic brakes, air brakes, electrical and engine control. If you're looking for an exciting career in the automotive industry, we want to hear from you!Automotive Technicians must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need. UPS offers attractive wages, benefits and paid vacations. Uniforms are also provided. Automotive Technicians must possess the required hand tools required to perform the applicable job assignment. Responsibilities and DutiesMeets D.O.T requirements required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required, throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsMeets all requirements to be Power Industrial Truck Operations (PITO) certified Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A Commercial Driver's License (CDL) - PreferredWorks full time shifts: 8-10 hours per day, 4-5 days per 7-day weekDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.86 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Paid Time Off • Health Benefits Day One • 401K Match • No Travel At Bath & Body Works, everyone belongs. We are committed to creating a diverse, equitable and inclusive culture focused on delivering exceptional fragrances and experiences to our customers. We focus on recruiting, retaining, and advancing diverse talent where our associate population is as diverse as the communities we serve, live and work. In addition, we work to improve our communities and our planet in a way that will make us proud for years to come because we believe the world is a brighter, happier place when everyone has access to the things that make them happy.Summary HVAC Technician is capable of performing in all areas related to HVAC systems and Building Automation. Responsibilities include, but are not limited to: Performing maintenance and service repairs on heating, ventilating, and air conditioning systems. Install new units or replacement parts for existing units according to specifications and established safety guidelines, depending upon the immediate needs of the department. While HVAC Technicians may have developed skills in one or more areas, all are expected to be able to perform general Maintenance and repair in all areas of assignment. Reports to the Supervisor of HVAC Maintenance and provides support to the HVAC Team. Responsibilities Performs maintenance and service repairs on heating, ventilating, and air conditioning systems. Installs new units or replacement parts for existing units according to specifications and established safety guidelines.Performs skilled and semi-skilled maintenance activities including performing material handling equipment troubleshooting and repair; basic activities such as electrical, plumbing.Maintains building, equipment, shop and storage areas in a clean and orderly condition.Completes work orders for work performed and includes parts and inventory used.Document all work order activities.Responsible for productivity/accountability of assigned work orders and daily activities.Follow lockout-tag out procedures, confined space procedures, and other safety and environmental procedures/policies and ensure compliance with all company policies, building codes and safety initiatives as assigned.Support projects including collaborating with leadership and contractor/vendors, as assigned.Punch list all assigned projects and tasks to ensure alignment to company standards and specifications.Participate in all Preventive Maintenance tasks and Inventory Management as assigned. Qualifications & Experience Possession of a high school diploma or equivalent and 3-5 years of verifiable assignment-related maintenance experience, or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job as listed above.Possession of a valid driver's license and a satisfactory driving record.Ability to lift 70 poundsEPA Certification Type I and II required; Universal preferredCommercial experienceElectrical experience with high and low voltage, AC and DC.Energy Management Systems and DDC Controls experience.Knowledge of mechanical and electrical drawings.Must be able to navigate computers and applicable software.Ability to be flexible with work assignment and schedules.Obtain Power Equipment and Man-lift License.Work as a teammate within the department and across the businessWelding skill preferred, but not required Core Competencies Lead with Curiosity & Humility Build High-Performing Teams for Today & Tomorrow Influence & Inspire with Vision & Purpose Observe, Engage & Connect Strive to Achieve Operational Excellence Deliver Business Results Benefits We invite you to join Gingham Nation, where we invest in our associates through competitive compensation, benefits, and development opportunities, so they can continue to be their best at work, at home, and in their communities. Benefits offered to our eligible associates include a no cost mental health and well-being program, health coverage with a variety of plans to choose from, flexible and affordable saving programs, paid time off and a merchandise discount. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We are an equal opportunity and affirmative action employer We do not make employment decisions based on an individual's race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States.

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview:Tire Technician – Part-Time – SawmillDiscount Tire5828 Sawmill RdDublin,Ohio43017OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Scale $15-$16Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.Responsibilities:#discounttire12

Req ID:460781Address: 6023 Alum Creek Drive Obetz, OH, 43137Benefits:* Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% Match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring ImmediatelyWelcome to Love’s!As a Deli Host, your role goes beyond daily tasks. You will interact with people from all walks of life, brightening their day with top-notch customer service and maintaining a clean, stocked deli area. No experience No problem! We will teach you!Job Functions:General customer service duties including, but not limited to, answering questions about menu offerings, and addressing customer needs. Additionally, assisting store cashier team members in cleaning and maintaining the deli, coffee, and fountain bars with fresh offerings throughout the shift.Accurately prepare deli products as instructed in designated preparation guides to include salads, fresh-cut fruit, cold/hot sandwiches and wraps, parfait cups, etc.Use a variety of methods and technologies to ensure we follow company policies and procedures to maintain proper food safety conditions.Additional duties could include cross-training in other departments such as Store Cashier, Restaurant Cashier, Facility Maintenance, and Leadership Roles.Ability to move, lift 25+ pounds. Ability to work in various temperatures.Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Come join our team as a Plumber I! We’re currently looking for Plumber I candidates. The position of Plumber I is critical to learning the plumbing trade and steadily improving both quality and speed over time. RESPONSIBILITIES Studiously learn the necessary aspects of drain, waste, vent (DWV), water systems, and other aspects including but not limited to setting of tubs and installation of plumbing fittings and fixtures.Accurately build and install complete plumbing systems showcasing a clear understanding of all types of plumbing fittings.Ensure adherence to safety and quality of work standards.Deliberately manage materials needed for various projects.Steadily accumulate knowledge of basic tools required for plumbing work (soldering, cutting, and notching) and be able to put that knowledge into use within thirty (30) days.Precisely and regularly maintain a clean and organized jobsite.Thoughtfully follow directions and processes given by site leadership.Enthusiastically motivated to learn the plumbing trade.Maintain compliance with state trade licensing programs.Build knowledge of Plumbing Code.Maintain excellent attendance and punctuality to adhere to work schedule. QUALIFICATIONS Motivated work ethic.Clear verbal communication skills.Basic mathematical ability including addition, subtraction, multiplication, and division.Ability to read, write, and interpret reports and documents such as safety rules, operating instructions, procedure manual, and blueprints / CAD drawings.Critical thinking skills and ability to problem solve independently.A high school diploma or GED is required.Valid driver license is required.Obtain apprentice licensing in appropriate states.Exposed to outdoor weather conditions including rain, humidity, snow, wind, cold, and heat.The environment may include very loud noises, working near mechanical and moving parts, working at various heights, and small, awkward, confining workspaces.There is the possibility of inhalation of fumes and airborne particles as well as the risk of electrical shock and vibrations.Must be able to do the following activities for most of the workday: stand, walk, use hands or fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, see, talk, and hear.Must be able to climb or balance regularly.Near constant lifting or carrying of items of various weights, typically up to 10 pounds most of the day. Capable of lifting at least 50 pounds on occasion.Manual dexterity sufficient to reach/handle items, work with the fingers, and perceive attributes of objects and materials.Wear job site-specific personal protective equipment and be able to lift at least 50 pounds.Possible travel to out of town/out of state projects SCHEDULE: Monday to Friday LOCATION: On-site SALARY: $18-$26 hourly BENEFITS MedicalDentalVisionShort- & long-term disabilityAccrued PTOPaid holidays401(K)Profit sharing It’s time to join the team at R.T. Moore, a mid-size mechanical contractor company where you are more than a number. Here everyone is treated with respect, and leadership cares about you as a person and listens to your input. Plus enjoy a steady Monday-Friday schedule, with no nights or weekends! Ready to get Moore Check us out at www.rtmoore.com to join one of the largest mechanical contractors in the nation! R.T. Moore is an Equal Opportunity EmployerEqual Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Company Description: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere.At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown’s history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them.From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward.We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team.Want to Learn More Watch A Day in the Life of a Crown Field Service Technician! click here.SHOP SERVICE TECHNICIAN / MECHANICMechanic – Auto / Diesel / Forklift TechnicianInternal Job Title –Shop Service TechnicianJob Responsibilities:Troubleshoot, diagnose and repair Crown and all other makes of lift trucks.Perform all assigned planned maintenance on customer lift trucks.Process paperwork after completion of each jobWelding & fabricationQualifications:High school diploma or equivalent.Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics.Good written/verbal communication and customer care skills.Ability to safely operate lift trucks.Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred.Pay range for this position is $23.00 to $34.00 per hourWork Authorization:Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire.No agency calls please.Compensation and Benefits:Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more.Crown also offers Service Technicians:Award-Winning Service TrainingCompany Vehicle for Field Service TechniciansTool InsuranceNo Flat Rate40 Hours Per Week plus OvertimeUniformsSpecialty ToolsPrimarily 1st ShiftCareer Advancement OpportunitiesEOE Veterans/Disabilities

Securitas Technology Corporation, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services.Wecurrently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesServices intrusion, fire, CCTV, and access control security systems.Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order.Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs.Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operationalMay plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installationsPresents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology.Attends and completes training programs as requested.Minimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systems preferredA thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems, fir alarm and life safety systemsNICET Certification preferredLenel, Pro-Watch, Software House, Picture Perfect certifications preferredClimb ladders that extend up to 24 ft. in heightsCarry items up to 75 poundsAbility to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.Bosch, Honeywell, Radionics, or DMP system knowledge preferredWorking knowledge IP addressing equipmentSecuritas offers comprehensive benefits includingHighly competitive salaryCompany VehicleCompany Cell PhoneOpportunity for annual merit pay increases.Paid company trainingMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday, and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Shift - Monday to Thursday, 3 PM to 1:30 AM, OT as neededWhat this job involves - The Maintenance Mechanic will be responsible for performing a wide range of maintenance tasks, including preventative maintenance, repairs, and troubleshooting of various building systems and equipment. The ideal candidate will have a strong understanding of general maintenance practices and possess the ability to work independently and as part of a team. HVAC/Refrigeration experience is preferred.Desired Experience and Technical Skills:RequiredStrong mechanical aptitude and troubleshooting skillsAbility to read and interpret technical manuals and blueprintsKnowledge of safety procedures and regulationsExcellent communication skills, both verbal and writtenAbility to work independently and as part of a teamPhysical capability to perform the required tasks, including lifting and working at heightsPreferredExperience with hydraulic and electrical systemsKnowledge of plumbing systems and componentsKnowledge of dock levelers and garage door maintenance#MMjobs

About the RoleAs a Senior Maintenance Technician, you will efficiently coordinate and implement repairs and perform equipment and facility maintenance in a cost-effective manner.What You’ll DoDaily inspection and repair of all conveyor systems and equipmentRoutine inspection, preventative maintenance and maintenance of air compressors, compactors, bailers, cardboard conveyors and power and material handling equipmentPerform inspection and repair of fire protection equipmentParts administrationMeet with department supervisor and/or manager to anticipate and plan for future preventive maintenanceCollaborate with department managers and supervisors to address mechanical opportunities while ensuring optimum processing productivityProvide back-up for department Assistant Manager and/or Manager when absentCompile and maintain accurate inventory records and reportsProvide on-the-job (OJT) training to AssociatesPerform minor electrical and plumbing repairs, painting and office furniture movesPerform routine maintenance on heating and air conditioning unitsMaintain lighting throughout the facilityAssist outside contractors to perform various dutiesPromptly answer calls for jams, malfunctions or other maintenance-related issuesWhat Skills You HaveRequiredWorking knowledge of mechanical, electrical, plumbing and HVAC equipmentCompliance with all MSDS standards and lock-out/tag proceduresAbility to work with minimal supervisionMust provide own basic set of tools and keep the work area neat and clean

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview:Tire Technician – Part-Time – Broad StDiscount Tire6959 E Broad StColumbus,Ohio43213OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Scale $15-$16Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.Responsibilities:#discounttire6

Company Description: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere.At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown’s history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them.From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward.We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team.Want to Learn More Watch A Day in the Life of a Crown Field Service Technician! click here.External Title: Mechanic - Field ServiceInternal Title:Field Service TechnicianThis position is based out ofthe New Albany, Ohio branch and will provide support to West jefferson, Columbus, Ohio and surrounding areas.Job Responsibilities:Troubleshoot, diagnose and repair Crown and all other makes of lift trucks.Perform all assigned planned maintenance on customer lift trucks.Maintain a service vehicle and inventory.Process paperwork after completion of each job.Qualifications:High school diploma or equivalent.Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics.Good written/verbal communication and customer care skills.Valid driver's license, good driving record, and ability to safely operate lift trucks.Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred.The pay range for this posirtion is $23.85 to $35.35 per hourWork Authorization:Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire.No agency calls please.Compensation and Benefits:Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more.Crown also offers Service Technicians:Award-Winning Service TrainingCompany Vehicle for Field Service TechniciansTool InsuranceNo Flat Rate40 Hours Per Week plus OvertimeUniformsSpecialty ToolsPrimarily 1st ShiftCareer Advancement OpportunitiesEOE Veterans/Disabilities

Securitas Technology Corporation, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services.Wecurrently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesServices intrusion, fire, CCTV, and access control security systems.Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order.Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs.Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operationalMay plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installationsPresents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology.Attends and completes training programs as requested.Minimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systems preferredA thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems, fir alarm and life safety systemsNICET Certification preferredLenel, Pro-Watch, Software House, Picture Perfect certifications preferredClimb ladders that extend up to 24 ft. in heightsCarry items up to 75 poundsAbility to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.Bosch, Honeywell, Radionics, or DMP system knowledge preferredWorking knowledge IP addressing equipmentSecuritas offers comprehensive benefits includingHighly competitive salaryCompany VehicleCompany Cell PhoneOpportunity for annual merit pay increases.Paid company trainingMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday, and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview:Tire Technician – Part-Time – Broad StDiscount Tire6959 E Broad StColumbus,Ohio43213OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Scale $15-$16Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.Responsibilities:#discounttire6

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment