Job Description SummaryThe LEAP Engine Performance team is responsible for ensuring overall engine performance meets all customer requirements for thrust and fuel consumption for applications for our LEAP airframer and airline customers. As an engineer in the Performance team, you will work cross functionally within the Engine Systems team to ensure all program Engine Performance deliverables are met. This includes close cooperation with SPOCT disciplines (systems, performance, operability, controls, and transient analysis). The role centers around the utilization of the engine cycle model which models the thermodynamics of components and the engine as a whole. You will utilize the engine model to evaluate engine design change trade studies as well as process results for engineering tests and certification testing. Systems engineering is a cross-functional engineering discipline centered on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs. The discipline that executes a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executed. Process that proceeds from concept to production to operation. Impacts departmental operations and responsible for planning/execution. The role has some autonomy but is focused on execution of activities within an operating discipline covered by standard functional practices and procedures. Some judgment may be required but this is typically with guidance.Job DescriptionRoles and ResponsibilitiesLead (with guidance) thermodynamic cycle development work, analysis, and trade studies on the assigned program.Own Performance planning, test coverage, and analysis for assigned engine tests.Proactively identify engine performance issues and work cross functionally to drive solutions.Demonstrate ownership in production and field support activities on assigned program.Support the team in preparation for technical reviews.Provide technical guidance, mentoring, and training to less experienced employees.Drive proper documentation of all technical work on the assigned program.Participates in the research, design, development, and enhancement of technologies in the areas of performance, operability, and cost optimization.Can include delivery of customer solutions that properly balance cost and benefit (including architecture, key design trade-offs, flow-down of requirements and flow-up of capability).Developing in-depth knowledge of a technical discipline.Uses prior experience and acquired technical expertise to execute policy/strategy.Required QualificationsBachelor's degree in engineering from an accredited university or college.Minimum of 3 years of experience in engineering in related field.Desired CharacteristicsStrong aero-thermal analytical skills.Strong oral and written communication skills.Demonstrated ability to analyze and resolve problems.Ability to document, plan, market, and execute programs.Established project management skills.Advanced Degree in Engineering / Technical Field.Experience leading gas turbine system level thermodynamic modeling and/or data analysis activities.Detailed working knowledge of NPSS.#LI-RB1This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryAre you ready to innovate the future At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. We are looking for your talent and expertise to continue to transform flight as part of our GE9x team. Looking to impact aviation for years to come Your work on the GE9x engine will do just that, as you help build the most fuel-efficient engine in its class. You’ll be part of a team that embraces your drive, curiosity, unique ideas and perspectives. Join us and share in our pride and purpose that affects the lives of millions around the world. There has never been a better time to be part of our company and our culture and to see your career take flight!Job DescriptionRoles and ResponsibilitiesExecute the design, analysis, and evaluation of the Combustor Flow Path using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements.In-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area.Prepare and present technical data to customers.Provide technical leadership and engineering support to team supporting the design.Document technical data generated by the assigned project consistent with engineering policies and procedures.Developing in-depth knowledge of a technical discipline. Uses prior experience and acquired technical expertise to execute policy/strategy.Provide timely communications on significant issues or developments.Participate on teams assigned to address organizational initiatives and generic issues.Participate as a presenter or reviewer in technical and program reviews.Prepare invention disclosures to protect the technology that provides a competitive advantage to the business.Required QualificationsBachelor of Science in Engineering from an accredited university or college.At least 5 years of experience in an engineering positionDesired CharacteristicsExtensive experience in the design, testing, and certification of turbine bladesAbility to communicate clearly and effectively with all levels of the organization.Demonstrated ability to analyze and resolve problems.Outstanding mentoring skills and a strong desire to help others succeed.#LI-EDRICH #GE9XThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes#LI-Remote - This is a remote position

Job Description SummaryGE Aerospace is a dynamic and innovative organization dedicated to 100+ years of living our purpose: to invent the future of flight, lift people up, and bring them home safely. The Staff Engineer - Generator Mechanical Design will contribute to the design, development, and validation of products, solutions and systems for aerospace power generation. In this role, you will provide technical guidance, analysis, and qualification support of electric motors and generators for aerospace applications. You will lead technical teams for new designs and develop design practices while providing mentorship/guidance to the team. This position will be located at the EPISCenter in Dayton, OH, which is the headquarters for GE Aerospace Power. This is our new state of the art design and test facility. You truly will be part of the team that "Invents the future of Flight".At GE Aviation in Dayton, OH the EPISCenter is the headquarters for all of Aviation Power Engineering. At this facility you have an opportunity to put your engineering training and skills to use. Our Engineers are focused and challenged on developing new electric power technologies and delivering state of the art products such as Hybrid Electric aircraft, electrical power systems for the latest military platforms, and SiC technology to name a few. Plus, if you like hands-on work, there is also a 155,000 sq ft lab that includes 6 high power test cells totaling 15 MW, an EMI chamber, an electronics lab, a rapid build prototype lab, and a real time simulator lab with all the latest equipment.Job DescriptionRoles and ResponsibilitiesExecute the design, analysis, or evaluation of assigned projects within the Power Generation arena using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements.Design, develop, or select rotating equipment components such as rotors, pumps, bearings, and seals adhering to industry standards and regulatory requirements.Collaborate with designers utilizing CAD software (NX) and Analysts utilizing analysis tools (ANSYS) to create detailed designs and conduct structural, thermal, and fluid flow analyses.Collaborate with cross-functional teams including Bid & Proposal, Manufacturing, Verification & Validation, and Quality to translate design concepts into fully functional prototypes and products.Conduct feasibility studies and performance assessments to optimize product designs for efficiency, durability, and cost-effectiveness.Evaluate materials selection, manufacturing processes, and supplier analysis to ensure product integrity and performance.Provide technical expertise and guidance to junior engineers, assisting in their professional development and project execution.Support continuous improvement initiatives by identifying opportunities for design enhancements, process optimizations, and cost reductions.Participate in design reviews, risk assessments, and failure mode analyses to mitigate potential issues and ensure product reliability and safety.Stay abreast of emerging technologies, industry trends, and best practices in rotating equipment design, contributing to the company's innovation and competitiveness.Maintain accurate documentation of design specifications, test results, and project milestones, ensuring compliance with internal standards and external regulations.Basic QualificationsBachelor's degree in Mechanical Engineering from an accredited university or collegeMinimum of 8 years of design and/or development experienceThis role requires use of technical data subject to U.S. Government contract restrictions and this posting is only for U.S. Citizens. GE will require proof of status.Desired CharacteristicsMaster’s degree in Mechanical Engineering from an accredited university or college10 years of aerospace industry experienceProficiency in CAD software and simulation toolsStrong understanding of mechanical principles, fluid dynamics, thermodynamics, and materials scienceFamiliarity with product design, development, and verificationEffective problem-solving skills and ability to lead teams through structured problem solving strategiesEffective communication and interpersonal skills, with the ability to collaborate effectively with multidisciplinary teams and stakeholdersDemonstrated ability to lead programs or product development teamsAbility to document, plan, market, and execute programsSome of our competitive benefits package includes:Medical, dental, and vision insurance that begins on the first day of employmentPermissive time off policy for newly hired employeesGenerous 401(k) planTuition ReimbursementLife insurance and disability coverageAnd more!This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryGE Aerospace is a dynamic and innovative organization dedicated to 100+ years of living our purpose: to invent the future of flight, lift people up, and bring them home safely. As we continue to grow, we are seeking a highly skilled and experienced Senior Electrical Engineer- Hardware Design to join our dynamic team. As a key member of our engineering department, you will be responsible for designing, developing, and testing electronic hardware components and systems for a range of innovative projects. The ideal candidate will have a strong background in electronic hardware design, with a proven track record of delivering high-quality solutions in a fast-paced environment.In this role, you will provide both leadership and support to military and commercial projects for the Aviation Power business. These fast-paced projects involve developing new electronic assemblies and magnetics for GE Avionics customers and are essential to growth of the Power and Hybrid Electric business areas. At GE Aviation in Dayton, OH the EPISCenter is the headquarters for all of Aviation Power Engineering. At this facility you have an opportunity to put your engineering training and skills to use. Our Engineers are focused and challenged on developing new technologies and delivering state of the art products such as Hybrid Electric aircraft, the latest military platforms, and SiC technology to name a few. Plus, if you like hands-on work, there is also a 155,000 sq ft lab that includes 6 high power test cells totaling 15 MW, an EMI chamber, an electronics lab, a rapid build prototype lab, and a real time simulator lab with all the latest equipment.Job DescriptionRole & ResponsibilitiesLead the design and development of electronic hardware systems, including schematic capture, PCB layout, and component selection.Work closely with cross-functional teams, including software engineers, mechanical engineers, and project managers, to define requirements and ensure seamless integration of hardware components.Conduct feasibility studies and provide technical guidance for new product development initiatives.Perform thorough testing and validation of hardware designs, including prototype bring-up, debugging, and compliance testing.Develop and maintain design documentation, including schematics, bill of materials (BOM), and design verification test (DVT) reports.Drive continuous improvement initiatives to optimize design processes and enhance product performance and reliability.Stay updated on industry trends and emerging technologies, and evaluate their potential impact on future hardware designs.Mentor junior engineers and provide technical leadership and guidance as needed.Basic QualificationsBachelor’s degree in Engineering, Computer Science, or related degree from an accredited university or college (or a high school diploma / GED with at least 15 years of experience of relevant electrical design experience)Minimum of 10 years of professional experience in electrical hardware designThis role requires use of technical data subject to U.S. Government contract restrictions and this posting is only for U.S. Citizens. GE will require proof of status.Desired CharacteristicsMaster’s degree in Engineering, Computer Science, or related degree from an accredited university or college.Proficiency in schematic capture and PCB layout tools such as Altium Designer, Cadence Allegro, or similar.Power electronics experience.FPGA VHDL design.Experience with high reliability electronic systems design.Magnetic components knowledge.Lab hands-on experience.Strong understanding of signal integrity, power integrity, and EMC/EMI considerations in high-speed digital and mixed-signal designs.Experience with simulation tools such as SPICE, SI/PI simulation, and FPGA design tools is highly desirable.Hands-on experience with lab equipment for debugging and testing hardware prototypes, including oscilloscopes, logic analyzers, and spectrum analyzers.Familiarity with industry standards and compliance requirements for electronic hardware design, such as FCC, CE, and RoHS.Excellent problem-solving skills and the ability to work effectively in a collaborative team environment.Strong communication skills, with the ability to convey complex technical concepts to diverse audiences.Some of our competitive benefits package includes:Medical, dental, and vision insurance that begins on the first day of employmentPermissive time off policy for newly hired employeesGenerous 401(k) planTuition ReimbursementLife insurance and disability coverageAnd more!This position may be eligible for the following flexible work arrangements (FWA):Hybrid work schedule (3 days in office; 2 days remote)This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryAs a Senior Systems Engineer, you will join GE Systems Power Generation team and provide the technical leadership that enables innovation, engineering excellence, and quality as we meet the transforming demands of our customers, while delivering the performance and reliability that our users demand.At GE Aviation in Dayton, OH the EPISCenter is the headquarters for all of Aviation Power Engineering. At this facility you have an opportunity to put your engineering training and skills to use. Our Engineers are focused and challenged on developing new technologies and delivering state of the art products such as Hybrid Electric aircraft, the latest military platforms, and SiC technology to name a few. Plus, if you like hands-on work, there is also a 155,000 sq ft lab that includes 6 high power test cells totaling 15 MW, an EMI chamber, an electronics lab, a rapid build prototype lab, and a real time simulator lab with all the latest equipment.Job DescriptionRoles and ResponsibilitiesThe Senior Systems Engineer will be leading systems development efforts for new product introductions. The primary responsibilities include the following:Work closely with Design and Systems Teams to confirm full specification compliance and drive timely problem report resolutions.Work closely with Project and Program Manager to ensure program/project plan is developed and executed properly.Implement robust requirements management practices, employing industry-standard tools and methodologies to maintain traceability and manage changes throughout the project lifecycle.Conduct thorough system analysis to identify potential risks, dependencies, and integration challenges, proposing innovative solutions to optimize system performance and reliability.Requirements elicitation, derivation, and decomposition to lower-level subsystems and components.Coordination with customers to work through specification derivation questions.Test execution and procedure development that will demonstrate compliance to specifications.Troubleshoot system failures and performance issues and coordinate with other development roles.Serve as a primary technical liaison to bridge communication between customers and internal technical teams.The Senior Systems Engineer will also work with the broader organization in delivering to shared vision and goals and, as such, will play a central role in several engineering activities including:Participate in LEAN engineering activities such as release planning, concept and technical design reviews, and LEAN events.Ensure cross-system dependencies and system integration activities are addressed in the program plan.Ensure projects are supported through entire life-cycle from conception to post-launch.Explain difficult or sensitive information and promote agreement using clear and accessible language.Coach system engineers and engineering team members.Assist in Model-Based Systems Engineering activities to support development of system models.Required QualificationsBachelor's degree from an accredited university or college.A minimum of 5 years of experience in Systems Engineering role.A minimum of 10 years of experience in an engineering role.This role requires use of technical data subject to U.S. Government contract restrictions and this posting is only for U.S. Citizens. GE will require proof of status.Desired CharacteristicsProven track record in systems engineering, with a strong emphasis on electrical power systems in the aerospace sector.Excellent communication skills, with the ability to articulate complex technical concepts to both technical and non-technical stakeholders.Model-Based Systems Engineering Experience.Aerospace industry experience.High degree of demonstrated accountability to program deliverables, including quality, reliability, performance, and cost.Proven ability to manage risk and uncertainty for self and team within a dynamic priority-setting environment.Strong technical acumen paired with the ability to understand a wide range of technology domains including data communication protocols.Experience in DO-178c and DO-254 processes for developing software and complex electronic hardware.Experience in executing DO-160 tests, including the development of comprehensive test procedures.Experience in executing MIL-STD-160 tests, including the development of comprehensive test procedures.Proficient in managing requirements using both DOORS Classic and DOORS Next Generation platforms.MATLAB / Simulink experience.Some of our competitive benefits package includes:Medical, dental, and vision insurance that begins on the first day of employmentPermissive time off policy for newly hired employeesGenerous 401(k) planTuition ReimbursementLife insurance and disability coverageAnd more!This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryAs a Senior FPGA Design Engineer, you will provide leadership and support to the development of commercial and military projects for the Aerospace Power business. This role will focus on advancing digital design and FPGA capabilities to create innovative solutions to meet customer requirements and expectation during NPI execution.At GE Aerospace in Dayton, OH the EPISCenter is the headquarters for all of Aerospace Power Engineering. At this facility you have an opportunity to put your engineering training and skills to use. Our Engineers are focused and challenged on developing new technologies and delivering state of the art products such as Hybrid Electric aircraft, the latest military platforms, and SiC technology to name a few. If you like hands-on work, there is a 155,000 sq ft lab that includes 6 high power test cells totaling 15 MW, an EMI chamber, an electronics lab, a rapid build prototype lab, and a real time simulator lab with all the latest equipment.Job DescriptionRoles and ResponsibilitiesLead the design, development, analysis, evaluation, simulation, verification, integration/test of Field Programmable Gate Arrays (FPGAs).Lead the planning and execution of DO-254 objectives for custom logic lifecycle projects.Lead the design, analysis, or evaluation of both electrical sub-systems and power conversion systems using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements.Develop and test algorithms for signal processing and control of power systems and power electronics components including high frequency switching components.Work closely with embedded software and controls teams to develop architectures, interfaces, and designs for custom logic devices.Perform the analysis and decomposition of systems, software, and hardware requirements to custom logic device level requirements, architecture, and detailed design.Support the development of embedded software and firmware.Design, test, and troubleshoot analog and digital electronics circuits.Analog circuits designs include analog filters, transistor and op-amp circuits, interface circuits, signal conditioning, AD and DA converters, Power supplies.Digital circuits designs include micro controllers, FPGA, communication interface circuits, logic families and digital memory.Create EMI compliant designs and follow EMC best practices as they apply to analog and digital designs.Provide guidance to less experienced team members.Effectively and timely communicate with project team and leadership to enable quick issue resolution.Facilitate reuse strategies and Product Line Engineering (PLE) practices.Assure proper documentation of technical data generated for the assigned projects and or tasks consistent with engineering policies and procedures.Work in a lab environment and follow all site policies and procedures.Required QualificationsBachelor or Master’s Engineering, Computer Science, or related degree from an accredited university or college (or a high school diploma / GED with at least 15 years of experience of relevant electrical design experience).Minimum of 10 years of professional experience in electrical hardware design, digital design, and FPGA development.This role requires use of technical data subject to U.S. Government contract restrictions and this posting is only for U.S. Citizens. GE will require proof of status.Desired CharacteristicsDemonstrated experience with Xilinx and Intel FPGAs with VHDL firmware languageDemonstrated DO-254 lifecycle experience with custom logic devices.Demonstrated experience with FPGA simulation tools.Experience with embedded software development and programming in C.Experience with high reliability electronic systems designMagnetic components knowledgeLab hands-on experienceExperience with Mathworks suite of tools such as MATLAB, Simulink, Stateflow, HDL Coder, System Composer, and Requirements ToolboxExperience with ARP-4754, RTCA DO-178, DO-331, and DO-254PTC Windchill experienceIBM DOORS experienceExperience with Power Systems architecture and design, including power generation, power conversion, and power distribution on aircraft and aerospace platforms.Effective communication skills and strong interpersonal skills.High degree of accountability to program deliverables, including quality, reliability, performance, and cost.Clear thinker and ability to work with limited information and ambiguous problem definitions.Proven ability to manage risk and uncertainty for self and team within a dynamic priority-setting environment.Strong technical acumen paired with the ability to understand a wide range of technology domains.Ability to drive innovation across organizations and influence indirect teams.Some of our competitive benefits package includes:Medical, dental, and vision insurance that begins on the first day of employmentPermissive time off policy for newly hired employeesGenerous 401(k) planTuition ReimbursementLife insurance and disability coverageAnd more!This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes