We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeTo achieve HDMA business targets, it is critically important to find whether a given part/system design is cost-driven and provides a reasonable value for the money.The Cost Planning Chief Engineer is the recognized Technical Leader for the Design and Performance Category. All cost-related issues requiring adjudication or direction setting come to him as final decision-making authority. They are well aware of emerging technologies in their field and demonstrate technical competence, breadth of knowledge, and leadership in deciding direction and method to address matters relating to Cost. They have the experience to recognize and quantify a proposal’s effect on cross-functional areas and interpret the downstream effects on the overall business.Key AccountabilitiesExpertise and Credibility:Possesses a thorough knowledge of standard and novel manufacturing processes used to produce parts in their field. Through their own experience, they can recognize whether a part is efficiently crafted for ease of manufacture and optimized for cost. Can also recognize the innovation point or enabling technology that makes for an excellent design. Conversely, can identify areas where improvement opportunities exist and by what means. They stay abreast of the latest developments and technologies trending in their field. Has a thorough understanding of Regulations, Market competitiveness, Cost and Weight and accounts for these factors in his decision making.Verification and Judgement:Evaluates the reasonableness of cost targets and VA/VE proposals by carefully examining the logic and assumptions that were used in creating them. Can judge the Feasibility of a proposal, including the path necessary for implementation (ex., DR-theme, new supplier QAV, Factory investment) and application timing. Finds the Ranking and Judgement of cost-related items.Gives Approval or issues instructions as needed. Correlation activityOn-site attendance at the benchmarking workshop provides background, context, and leadership in the discussions with the vendor.Consults regularly with counterparts in the Japan Cost Planning Division. Consults regularly with Purchasing and key suppliers to interpret the current situation in the supply chain.Collaborates with relevant stakeholders to interpret the impact on other metrics resulting from Cost proposals (ex. Quality, Ergonomics, Maintenance etc.) OtherPerform other related duties as assigned or requested by management. Qualifications, Experience, and SkillsMinimum Educational QualificationsBachelor’s degree in the Engineering field.Minimum Experience20+ years of experience combining product development and design team leadership. Other Job-Specific SkillsTechnical expertise in the part materials and manufacturing process.Ability to find if a design is optimized for cost/investment/customer viewpointBasic use of CATIA (not specialist), Excel, and PowerPoint for analysis and reporting.Works well in a Team setting or independently in a fast-paced environment.What differentiates Honda and makes us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Regional Bonus (when applicable)Manager Lease Car Program (No Cost - Car, Maintenance, and Insurance included)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer MobilityEducation Reimbursement for Continued learningTraining and Development ProgramsAdditional Offerings:Lifestyle AccountChildcare Reimbursement AccountElder Care SupportTuition Assistance & Student Loan RepaymentWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Equipment Service TechnicianLocation:Marysville Auto Plant in OhioStarting Pay - $36.04 - $41.19 & $5,000 Sign on BonusWorkstyle - Onsite*Relocation assistance for candidates relocating over 50 miles*About this Position:Equipment Service Technicians keeps equipment in good operating condition through effective preventative maintenance and equipment repairs. Effectively communicate technical issues with the equipment service and production teams and maintains equipment data and documentation daily.Responsibilities include:Repairing, maintaining equipment and supporting daily production.Responding to breakdowns and calls to keep production running.Supporting weekend maintenance repair and preventative maintenanceactivities when necessary.Supporting a reliability centered maintenance program.Supporting team activities and contributing your own ideas.Who we are seeking:Required Work Experience:A minimum of three months of relevant experience in a manufacturing environment with a 2 year technical degree.Or a minimum of two years of relevant experience, if no degree.Required Education:High School Diploma or equivalent.Desired skills:Daily reporting and tracking of activities.Plan, Do, Check, Action follow up items.Immediate response to production floor needs and requirements.Compliance with all safety policies and regulations.Able to communicate clearly in verbal and written format.Basic knowledge of Microsoft products.Ability to be flexible and change work hours as needed.Able to analyze problems and determine root causes.Strong self-direction and drive.Capability to develop a high level a high level of expertise/aptitude in mechanical and electrical areas.Experience with Motoman robots.Experience with Omron programmable logic controllers.Additional Position Factors:Equipment inspections.Daily reporting and tracking of activities.Preventative maintenance.Continuous improvement.Other Job Specific Skills:Flexibility to work 2ndor 3rdshift long term.Flexibility to work weekends, holidays, daily overtime and off shifts as needed.Willingness to travel (percentage of travel varies between roles).To be eligible for a signing bonus, the applicant must not have been previously employed by Honda as a fulltime associate.What differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer MobilityEducation Reimbursement for Continued LearningTraining and Development ProgramsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

About the Role:This role will analyze, troubleshoot, repair, and resolve technical problems on equipment or components. Troubleshoots electronics devices at the component level and resolves integration and configuration problems involving circuit analysis, wave form calculations, fault isolation, prom programming, and signal flow tracing.What You'll Do:Use knowledge of electronics and digital components (10%)Use advanced knowledge and skills in electronic fundamentals and logic (10%)Read schematics and blueprints (15%)Apply electrical laws to make clear determinations while troubleshooting (10%)Use advanced through hole and surface soldering skills (15%)Use multi meters, oscilloscopes, and signal generators-analyzers (15%)Troubleshoots electronics devices at component level (25%)Additional duties as assignedMeets attendance and punctuality standardsWhat We're Looking For:5 to 8 Years of relevant work experience.Bachelor's Degree with Electronics Field of Study preferred.High School Graduate with General Studies field of study required.Other Education / Certifications: A+, Network +, Server +, IPCAble to use relevant computer system applications at an advanced level.Able to use a 10-key quickly and accurately.Possesses basic clerical and data entry skills.Possesses strong data entry skills.Able to perform basic mathematical calculations.Able to recognize and attend to important details with accuracy and efficiency.Able to communicate clearly and convey necessary information.Able to interact effectively with all levels of management.Possesses strong multi-cultural interpersonal skills.Possesses strong organizational and time management skills, driving tasks to completion.Able to constructively work under stress and pressure when faced with high workloads and deadlines.Able to maintain and promote social, ethical, and organizational standards in conducting internal and external business activities.Able to work independently with minimum supervision.Able to maintain confidentiality of sensitive informationAble to be immobile for long extended periods.Ability to transport 60 Lbs.Able to build solid, effective working relationships with others.Able to exhibit ability to be sensitive to the needs, concerns, and feelings of others.Able to quickly learn new systems and technology.Working Conditions:• Occasional non-standard work hours or overtime as business requires.Key SkillsPCB Soldering, TroubleshootingWhat's In It For You Elective Benefits: Our programs are tailored to your country to best accommodate your lifestyle.Grow Your Career: Accelerate your path to success (and keep up with the future) with formal programs on leadership and professional development, and many more on-demand courses.Elevate Your Personal Well-Being: Boost your financial, physical, and mental well-being through seminars, events, and our global Life Empowerment Assistance Program.Diversity, Equity & Inclusion: It's not just a phrase to us; valuing every voice is how we succeed. Join us in celebrating our global diversity through inclusive education, meaningful peer-to-peer conversations, and equitable growth and development opportunities.Make the Most of our Global Organization: Network with other new co-workers within your first 30 days through our onboarding program.Connect with Your Community: Participate in internal, peer-led inclusive communities and activities, including business resource groups, local volunteering events, and more environmental and social initiatives.Don't meet every single requirement Apply anyway. At Shyft Global Services, a TD SYNNEX Company, we're proud to be recognized as a great place to work and a leader in the promotion and practice of diversity, equity and inclusion. If you're excited about working for our company and believe you're a good fit for this role, we encourage you to apply. You may be exactly the person we're looking for!We are an equal opportunity employer and committed to building a team that represents and empowers a variety of backgrounds, perspectives, and skills. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, gender, gender identity or expression, sexual orientation, protected veteran status, disability, genetics, age, or any other characteristic protected by law.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job Purpose To contribute to the development of functioning prototypes that will eventually become production ATV/SxS vehicles, researching and applying new technologies to support business targets and maintaining global vehicle product quality.Key AccountabilitiesDevelop basic component and system layouts for ATV/SxS prototype vehicles using computer-aided design software that achieve concept targets, function requirements, and manufacturing requisites with minimal supervision. Communicate specification requirements and manufacturing control points via prototype and production drawings that result in setting the final specifications of global ATV & SxS new models and mass production vehicles. Maintain accurate technical, development, and administrative documentation as required.Adhere to given cost targets for responsible parts that contribute to achievement of the vehicle development targets and achieve the cost targets through optimizing basic part/system designs and offsetting any spec changes after target fix through implementation of additional cost reduction ideas.Create and manage schedule of individual work to ensure deadlines are met, coordinate resource needs with supervisor, and effectively utilize contractor resources with minimal supervision. Consistently communicate project status and participate in project meetings, discussions, and development events.Generate basic ideas that contribute to the evolution of new technologies. Support maturation of ideas to prepare for development applications with minimal supervision.Support market quality themes under the direction of others. Utilize problem-solving methods to analyse root causes. Develop and implement corrective maintenancespecs as necessary with minimal supervision.Qualifications, Experience, and SkillsMinimum Educational Qualifications: Bachelors Degree or equivalent in related engineering disciplineMinimum Experience: Engineering experience desired, preferably in Powersports or Automotive fieldOther Job-Specific Skills:Strong leadership, coaching and mentoring skillsAbility to interact/communicate effectively with staff/managementMust be able to operate with high level of confidentialityCompetent in Free Trade Agreement, Failure Mode Effects Analysis, dimensional tolerance stack-ups and applicationCompetent analytical, problem solving, judgement, decision-making andprioritizationCompetent drawing and layout skills/techniques, include understanding of Computer Aided EngineeringprinciplesCompetent in creating a plan and scheduleCompetent in understand product development schedulesWorking ConditionsTravel: Average of 1-3 times monthly. Amount varies based on project demands/responsibilities, conferences, etc.; includes possible overseas travel.Physical: Primarily works at a desk or scope; frequent keyboarding. Limited kneeling, standing, squatting, reaching or bending.Hazards: Risks found in a typical office & shop setting. May be exposed to explosives/flammables, pressurized equipment, toxic chemicals and moving parts.Overtime: Overtime expected based on project demands/responsibilities.Maintains professional conduct and follows all departmental, safety DEPARTMENT, and COMPANY policies, Procedures, AND rules.What differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Starting at $16.50 per hour! As a Fricker’s kitchen team member you will get to work in a fun, fast-paced environment. Whether you’re saucing wings, grilling ribs, or prepping food for a busy weekend, your skills are critical in providing the mouth-watering food our guests are craving! Your job responsibilities include: Following proper food safety and sanitation proceduresFollowing recipes and cooking procedures to ensure quality products are servedKeeping the restaurant clean and safeWorking as a teamCommunicating with managers and front of house staffWorking in fast-paced, stressful environment and maintaining a positive attitude What you can expect from us: We will present you with the knowledge and skills needed to be successful.We will constantly coach, teach and train you for your continued development.We will provide honest, professional feedback on your performance. What we expect from you: A positive attitude.To be in your proper uniform and looking sharp every shift.To be flexible when necessary.Continued effort towards your own development.To follow company policies and procedures.To be yourself and have FUN!! Perks and Benefits Flexible work scheduleMeal and clothingdiscountsFree pair of Shoes for Crews on your anniversaryFree Birthday meal for you and your familyHoliday PayRewards ProgramReferral ProgramCareer growth opportunitiesHealthcare and prescription options for eligible employees Additional Information Must be 18+ years oldMust have reliable transportationMust be able to work various shiftsMust be authorized to work in the United States Do you think you have what it takes to work at the home of Fun, Food, Sports and Spirits If you do, click “Apply Now” and maybe you can be a part of our Frickin’ Team! Thank you for your interest in applying with Fricker’s. We are always looking for great people and appreciate you taking the time to complete our application. If there are currently no immediate hiring needs, we will keep your information on file for future opportunities and contact qualified applicants at that time. Again, thank you for your time. #FRKJOBS2BehaviorsPreferredLeader: Inspires teammates to follow themDedicated: Devoted to a task or purpose with loyalty or integrityTeam Player: Works well as a member of a groupMotivationsPreferredJob Security: Inspired to perform well by the knowledge that your job is safePeer Recognition: Inspired to perform well by the praise of coworkersGrowth Opportunities: Inspired to perform well by the chance to take on more responsibilityEqual Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Cargill is a trusted salt supplier to a wide variety of industries; our portfolio includes food processing salts, sodium reduction solutions, salt for water softeners and swimming pools, bulk and packaged ice melters, industrial salts, and salt for animal feeding. Working at Cargill is an opportunity to thrive – a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! We depend on creative, responsible, hardworking individuals like you to operate our business successfully!Job Type: Full TimeShift(s) Available: Weekend Shift Friday – Monday 6am – 4:30pm and 3rd shift 10:30pm - 7amCompensation: $34.01/hr in the first 90 days, then $37.01/hr after the 90 daysBenefitsMedical, Dental, Vision, and PrescriptionDrug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Tuition ReimbursementEmployee DiscountsPrincipal AccountabilitiesCompleting preventative, predictive, and reactive industrial electrical work throughout the facilityDocumenting all completed work and the conditions found, utilizing maintenance computer software as necessaryInstalling, maintaining, testing, evaluating, and repairing various electrical components and systems including low voltage automation systems, medium voltage motor control circuits, and high voltage (Comprehending mechanical/electrical schematics, blueprints, and/or operation manualsUnderstanding and adhering to all safety policies and proceduresMaintaining a safe and clean work environmentAbility to repair equipment in close proximity to explosivesRequired QualificationsMust be eligible to work in the United States without visa sponsorshipMust be 18 years or olderAbility to understand and communicate in English (verbal/written)Basic computer skillsAbility to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodationAbility to work in elevated areas (4 feet and above)Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of Personal Protective Equipment (PPE)Minimum of one year experience troubleshooting and maintaining various electrical components and systems (low, medium, or high voltage)Ability to work underground in a mining environmentCurrent ATF certification or the ability to obtain one upon hireAbility to work overtime including weekends, holidays, or different shifts with advance noticePreferred QualificationsExperience with SAP or a Computerized Maintenance Management System (CMMS)Certified Maintenance Reliability Technician (CMRT) or willing to acquire certificationHeavy equipment/industrial maintenance technical diploma from a trade school, or 3 years equivalent experiencePredictive Maintenance and/or Precision Maintenance CertificationsExperience with high voltage (High school diploma/GED or two-year equivalent work experienceImportant note: Eligible candidates must receive a passing score on a Ramsay standarized test.Routine background check and Alcohol Tobacco and Firearm (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check.Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/Vet.To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Come join our team as a Plumber I! We’re currently looking for Plumber I candidates. The position of Plumber I is critical to learning the plumbing trade and steadily improving both quality and speed over time. RESPONSIBILITIES Studiously learn the necessary aspects of drain, waste, vent (DWV), water systems, and other aspects including but not limited to setting of tubs and installation of plumbing fittings and fixtures.Accurately build and install complete plumbing systems showcasing a clear understanding of all types of plumbing fittings.Ensure adherence to safety and quality of work standards.Deliberately manage materials needed for various projects.Steadily accumulate knowledge of basic tools required for plumbing work (soldering, cutting, and notching) and be able to put that knowledge into use within thirty (30) days.Precisely and regularly maintain a clean and organized jobsite.Thoughtfully follow directions and processes given by site leadership.Enthusiastically motivated to learn the plumbing trade.Maintain compliance with state trade licensing programs.Build knowledge of Plumbing Code.Maintain excellent attendance and punctuality to adhere to work schedule. QUALIFICATIONS Motivated work ethic.Clear verbal communication skills.Basic mathematical ability including addition, subtraction, multiplication, and division.Ability to read, write, and interpret reports and documents such as safety rules, operating instructions, procedure manual, and blueprints / CAD drawings.Critical thinking skills and ability to problem solve independently.A high school diploma or GED is required.Valid driver license is required.Obtain apprentice licensing in appropriate states.Exposed to outdoor weather conditions including rain, humidity, snow, wind, cold, and heat.The environment may include very loud noises, working near mechanical and moving parts, working at various heights, and small, awkward, confining workspaces.There is the possibility of inhalation of fumes and airborne particles as well as the risk of electrical shock and vibrations.Must be able to do the following activities for most of the workday: stand, walk, use hands or fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, see, talk, and hear.Must be able to climb or balance regularly.Near constant lifting or carrying of items of various weights, typically up to 10 pounds most of the day. Capable of lifting at least 50 pounds on occasion.Manual dexterity sufficient to reach/handle items, work with the fingers, and perceive attributes of objects and materials.Wear job site-specific personal protective equipment and be able to lift at least 50 pounds.Possible travel to out of town/out of state projects SCHEDULE: Monday to Friday LOCATION: On-site SALARY: $18-$26 hourly BENEFITS MedicalDentalVisionShort- & long-term disabilityAccrued PTOPaid holidays401(K)Profit sharing It’s time to join the team at R.T. Moore, a mid-size mechanical contractor company where you are more than a number. Here everyone is treated with respect, and leadership cares about you as a person and listens to your input. Plus enjoy a steady Monday-Friday schedule, with no nights or weekends! Ready to get Moore Check us out at www.rtmoore.com to join one of the largest mechanical contractors in the nation! R.T. Moore is an Equal Opportunity EmployerEqual Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Hourly rate starting between $36.04 - $41.19$5,000 Sign-On Bonus for new hiresShift: 2nd or 3rd shift (will rotate on all 3 shift's for the first year)*Relocation assistance for candidates relocating more than 50 mileWage Information $36.04-$41.19Job PurposeThis position will be joining the Facilities department within Honda Development & Manufacturing of America, LLC’s. The Facilities department is responsible for the building which includes new construction, remodels, utility management (electric, compressed air, natural gas, water), building maintenance, end of life equipment replacements and upgrades. The goal of the department is to create a facility that we are proud of and serve our customers.Role Description:Work on a team to perform facilities equipment preventative maintenance, repairs, improvements, and reporting, to maintain a high level of customer service in building, equipment, and utility operations. Continuously develop associate skills through Honda maintenance training program and find ways of introducing technologies and efficiency improvements.Key AccountabilitiesComplete preventative maintenance and repairs on equipment and systems (e.g., mechanical, electrical, heating, ventilation, and air conditioning, and building controls). Perform daily assigned work order tasks and communicate any follow-up neededEvaluates and recommends equipment improvements to improve availability, capability, and yield. Suggest and revise preventative maintenance to properly maintain facilities equipmentPerforms equipment failure analysis (including preventative and unscheduled maintenance).Troubleshoots and diagnose equipment problems.Participate in a reliability centered maintenance program for equipment. Participate in team activities to develop and maintain long term equipment reliability. Support total equipment management through daily and proactive activities to improve operations, promoting business targets and objectives.Provide mentorship and teambuilding through work habits, communication and the sharing of knowledge and expertise. Expand and maintain technical expertise through formal and on-the-job training opportunities. Support and engage in activities that drive new ideas, leveraging new technology, new methods and approaches to positively impact Honda’s competitiveness.Qualifications, Experience, and SkillsMinimum Educational Qualifications:Completion of 2 year technical degree or equivalent equipment service experienceMinimum Experience Desired:3 years of experience in a Facilities environment (industrial, or heavy commercial)Will consider well qualified entry level candidateOther Job-Specific SkillsWorking knowledge of Facilities low and medium voltage electrical equipment (including substations, switches, cable, starters, Variable Frequency Drives,breakers, bus duct) and Building Management Systems.Ability to troubleshoot mechanical equipment, such as Heating, Ventilation, and Air Conditioning, Refrigeration, Air Compressors, Air Dryers, Boilers, Cooling Towers, Pumps, Plumbing & Piping.Good written and verbal communication skills with the ability to clearly express ideasComply with Honda Health and Safety PoliciesMinimum computer (Word, PowerPoint, Excel)Self-motivated, creative thinking, and a positive attitude, continuous improvement and customer service drivenMust use time effectively & prevent irrelevant issues or distractions from interfering with work completion.Demonstrate the ability to plan/prioritize work assignments, submit schedules, set clear milestones & completion dates.Demonstrate the ability to collect & analyze pertinent data, identify root cause, and develop effective countermeasures.Working ConditionsIdentify the working conditions and physical demands which relate to the essential functions of the position (e.g., physical requirements, work environment, travel, necessary overtime, etc.)High level of physical activity. Lots of walking, stairs, climbing, roof, hot/cold climate conditions.Participate in Honda related improvement activities such as Honda Improvement ProgramWork area focused on interior and exterior facilities mechanical room and manufacturing floor environmentInfrequent - Occasional trips to other plants or suppliers ( less than 1x per month )Ability to work effectively with production, equipment service associates and contractorsWilling to suggest improvements or enhancements to facilities operations.Ability to prioritize work assignments with efficient time management.Willingness to work weekends, all shifts, overtime, and shutdowns as required.Complete the required Equipment Service Technical Development Program consisting of approx. 700 hours of classwork and hands-on training over a 4 yr. period.Demonstrate competence with Honda Core Non-Exempt Role and Responsibilities for Maintenance Technician / Equipment Service.What differentiates Honda and makes us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Regional Bonus (when applicable)Manager Lease Car Program (No Cost - Car, Maintenance, and Insurance included)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer MobilityEducation Reimbursement for Continued learningTraining and Development ProgramsAdditional Offerings:Lifestyle AccountChildcare Reimbursement AccountElder Care SupportTuition Assistance & Student Loan RepaymentWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Come join our team as a Plumber I! We’re currently looking for Plumber I candidates. The position of Plumber I is critical to learning the plumbing trade and steadily improving both quality and speed over time. RESPONSIBILITIES Studiously learn the necessary aspects of drain, waste, vent (DWV), water systems, and other aspects including but not limited to setting of tubs and installation of plumbing fittings and fixtures.Accurately build and install complete plumbing systems showcasing a clear understanding of all types of plumbing fittings.Ensure adherence to safety and quality of work standards.Deliberately manage materials needed for various projects.Steadily accumulate knowledge of basic tools required for plumbing work (soldering, cutting, and notching) and be able to put that knowledge into use within thirty (30) days.Precisely and regularly maintain a clean and organized jobsite.Thoughtfully follow directions and processes given by site leadership.Enthusiastically motivated to learn the plumbing trade.Maintain compliance with state trade licensing programs.Build knowledge of Plumbing Code.Maintain excellent attendance and punctuality to adhere to work schedule. QUALIFICATIONS Motivated work ethic.Clear verbal communication skills.Basic mathematical ability including addition, subtraction, multiplication, and division.Ability to read, write, and interpret reports and documents such as safety rules, operating instructions, procedure manual, and blueprints / CAD drawings.Critical thinking skills and ability to problem solve independently.A high school diploma or GED is required.Valid driver license is required.Obtain apprentice licensing in appropriate states.Exposed to outdoor weather conditions including rain, humidity, snow, wind, cold, and heat.The environment may include very loud noises, working near mechanical and moving parts, working at various heights, and small, awkward, confining workspaces.There is the possibility of inhalation of fumes and airborne particles as well as the risk of electrical shock and vibrations.Must be able to do the following activities for most of the workday: stand, walk, use hands or fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, see, talk, and hear.Must be able to climb or balance regularly.Near constant lifting or carrying of items of various weights, typically up to 10 pounds most of the day. Capable of lifting at least 50 pounds on occasion.Manual dexterity sufficient to reach/handle items, work with the fingers, and perceive attributes of objects and materials.Wear job site-specific personal protective equipment and be able to lift at least 50 pounds.Possible travel to out of town/out of state projects SCHEDULE: Monday to Friday LOCATION: On-site SALARY: $18-$26 hourly BENEFITS MedicalDentalVisionShort- & long-term disabilityAccrued PTOPaid holidays401(K)Profit sharing It’s time to join the team at R.T. Moore, a mid-size mechanical contractor company where you are more than a number. Here everyone is treated with respect, and leadership cares about you as a person and listens to your input. Plus enjoy a steady Monday-Friday schedule, with no nights or weekends! Ready to get Moore Check us out at www.rtmoore.com to join one of the largest mechanical contractors in the nation! R.T. Moore is an Equal Opportunity EmployerEqual Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Cargill is a trusted salt supplier to a wide variety of industries; our portfolio includes food processing salts, sodium reduction solutions, salt for water softeners and swimming pools, bulk and packaged ice melters, industrial salts, and salt for animal feeding. Working at Cargill is an opportunity to thrive – a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! We depend on creative, responsible, hardworking individuals like you to operate our business successfully!Job Type: Full TimeShift Available:2ndCompensation: $34.01/hr in the first 90 days, then $37.01/hr after the 90 daysA Typical Work Day May Include:Completing preventative, predictive, and reactive industrial maintenance throughout the facility Documenting all completed work and the conditions found; utilizing maintenance computer software as necessaryInstalling, maintaining, testing, evaluating, and repairing various components and systems including heavy mobile equipment, hydraulic systems, 12 & 24V mobile electrical systems, belt conveyors, gear reducers, and bearingsOperating standard maintenance tools such as power tools, basic hand tools, pneumatic tools, electric tools, etc.Comprehending mechanical/electrical schematics, blueprints, and/or operation manualsOperating forkliftsUnderstanding and adhering to all safety policies and proceduresMaintaining a safe and clean work environmentAbility to repair equipment in close proximity to explosivesOther duties as assignedWhat You Will Need: Must be eligible to work in the United States without visa sponsorshipMust be 18 years or olderBasic computer skillsAbility to understand and communicate in English (verbal/written)Basic math skills including addition, subtraction, multiplication, and divisionAbility to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodationAbility to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of Personal Protective Equipment (PPE)Ability to work in elevated areas (4 feet and above)Minimum of one year of experience with industrial electrical knowledge and mechanical maintenance tradesAbility to work overtime including weekends, holidays, or different shifts with advance noticeAbility and willingness to work underground in a mining environmentMust receive a passing score on a Standardized Ramsay Test in order to be selected for an interviewWhat Will Put You Ahead:Must possess journeyman certificate, a state certificate, or a degree in the field of electrical with experience repairing and troubleshooting electrical systemsExperience with SAP or a Computerized Maintenance Management System (CMMS)Certified Maintenance Reliability Technician (CMRT) or willing to acquire certificationHeavy equipment/industrial maintenance technical diploma from a trade school, or 3 years equivalent experiencePredictive Maintenance and/or Precision Maintenance CertificationsHigh school diploma/GED or a minimum of two years equivalent work experienceExperience troubleshooting and maintaining various components and systems such as but not limited to packaging equipment, hydraulic & pneumatic systems, belt or roller conveyors, pumps, gear reducers, or bearings Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/Vet.To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeThe Fuel Economy and Emissions Senior Engineer will be responsible for leading the development and verification of tailpipe emissions and fuel economy to meet Honda, consumer, and regulator requirements. Additionally, this associate will independently collaborate across the HDMA business units to verify cross-functional impacts of the key vehicle specifications which impact fuel economy and emissions.Key AccountabilitiesLead and support the development and verification of tailpipe emissions and fuel economy through cross-functional activities to impacting systems (vehicle weight, aerodynamics, friction, electrical systems, cooling systems) through unit and vehicle testing. Analyze and set countermeasure concepts for gaps in fuel economy or emissions achievements with internal and external departments. Travel to other Honda certification laboratories to verify fuel economy and emissions are consistent. Drive prototype and competitor vehicles at proving grounds and/or on public roads to verify real-world fuel economy. Become responsible for a wide variety of vehicle components but also capable of digging more deeply into problems and seeking solutions. Lead and support cross-functional teams when developing solutions for vehicle development and testing issues. Determine and clearly communicate project status, concerns, and solutions to division management and team management on a regular basis.Qualifications, Experience, and SkillsBS or MS in Mechanical, Electrical, or Chemical Engineering 3-5 years related experience or equivalent level of education and experience Proficient PC skills, including but not limited to Excel, PowerPoint, and MATLABWorking ConditionsAssociate will work on the actual vehicle with hand and power tools. Candidate can expect to spend a portion of their time working in the lab – confirming their systems on bench, on the car, or in thermal chambers. (50%) Associate will perform analysis and documentation, then communicate findings to varying levels of management. (50%)What differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Cargill is a trusted salt supplier to a wide variety of industries; our portfolio includes food processing salts, sodium reduction solutions, salt for water softeners and swimming pools, bulk and packaged ice melters, industrial salts, and salt for animal feeding. Working at Cargill is an opportunity to thrive – a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! We depend on creative, responsible, hardworking individuals like you to operate our business successfully!Job Type: Full TimeShift(s) Available: 2ndCompensation: $34.01/hr in the first 90 days, then $37.01/hr after the 90 daysBenefitsMedical, Dental, Vision, and PrescriptionDrug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Tuition ReimbursementEmployee DiscountsPrincipal AccountabilitiesCompleting preventative, predictive, and reactive industrial electrical work throughout the facilityDocumenting all completed work and the conditions found, utilizing maintenance computer software as necessaryInstalling, maintaining, testing, evaluating, and repairing various electrical components and systems including low voltage automation systems, medium voltage motor control circuits, and high voltage (Comprehending mechanical/electrical schematics, blueprints, and/or operation manualsUnderstanding and adhering to all safety policies and proceduresMaintaining a safe and clean work environmentAbility to repair equipment in close proximity to explosivesOther duties as assignedRequired QualificationsMust be eligible to work in the United States without visa sponsorshipMust be 18 years or olderAbility to understand and communicate in English (verbal/written)Basic computer skillsAbility to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodationAbility to work in elevated areas (4 feet and above)Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of Personal Protective Equipment (PPE)Minimum of one year experience troubleshooting and maintaining various electrical components and systems (low, medium, or high voltage)Ability to work underground in a mining environmentCurrent ATF certification or the ability to obtain one upon hireAbility to work overtime including weekends, holidays, or different shifts with advance noticePreferred QualificationsExperience with SAP or a Computerized Maintenance Management System (CMMS)Certified Maintenance Reliability Technician (CMRT) or willing to acquire certificationHeavy equipment/industrial maintenance technical diploma from a trade school, or 3 years equivalent experiencePredictive Maintenance and/or Precision Maintenance CertificationsExperience with high voltage (High school diploma/GED or two-year equivalent work experienceImportant note: Eligible candidates must receive a passing score on a Ramsay standarized test.Routine background check and Alcohol Tobacco and Firearm (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check.Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/VetTo apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeAt the SeniorEngineer I Career Level, you are an expert in related technical areas and expected to oversee assigned development, testing, and/or research activities, while developing others from a technical, project, and/or team management role.Key AccountabilitiesProject/Team Management – Lead small to medium sized team, communicate the deliverables and plan to achieve them. Coordinate team activities on development/research/testing activities, managing the flow of team members on and off the project as needed. Build the capabilities of the team through coaching and mentoring. Provide technical guidance and oversight on requirement achievement, test results, and countermeasure application. Responsible for function output of project(s). Engineering Solution Design & Specification –Initiate and Lead the design of complex assemblies, the associated drawings, engineering specifications/standards and validation processes as required.Conceive and lead the development of engineering specifications and standards or functions to guide engineering and manufacturing work in the organization and its suppliers. Provide direct technical guidance and final oversight to multiple groups and ensure functional safety standards are met. Gather data and provide feedback and judgement on the feasibility, costs, quality, and performance of design concept. Understand and consider in decision-making the connections and impact to different vehicle segments and development activities. Correlate with cross-divisional or cross-company counterparts when necessary and align with the organizational technology standards, regulations, and policies. Review and provide judgement on technical results and offer recommendations for development to technical staff, including up to Chief Engineer. Build or bring in new technologies and specifications, managing associated risks and addressing issues. Supplier Management – Identify new, select and lead technical negotiations with suppliers. Support PIC’s in supplier interactions and negotiations. Lead communications, set or support direction setting, build new and manage existing relationships; addressing issues as needed. Documentation – Compile and/or develop documentation to meet program deliverables and move development process forward. Review documents prepared by PIC’s for completeness and quality.Key Accountabilities (Continued):Integration & Correlation – Integrate areas of responsibility into the vehicle or lead a group in doing so, providing guidance to resources as needed. Interacting and correlating direction at the cross-department and cross-divisional level. Adapting communication style and approach as needed depending on the audience and purpose. Relationship Management – Manage relationships with internal stakeholders and counterparts, building professional credibility and trust. Manage inter-company issues and coordinate internal resources. Provide reports on large project status items and deliverables. Personal Development – Be recognized as a subject matter expert in own area of technology or department function and beyond in the division. Maintain an in-depth understanding of current and emerging technologies, regulations, and company best practices. Improvement & Innovation – Lead continuous improvement projects and provide related technical or group management (i.e. in requirement development, process improvement, project management, associate development, communications). Lead and/or create new technology internally or with suppliers. Foresee and recognize potential cascading impacts in the development process and act to prevent or resolve them in a timely manner.Qualifications, Experience, and SkillsBS Mechanical, Aero, or Automotive Engineering; BS Industrial Design or Equivalent Industry Experience Minimum 5 years of experienceSubstantial general work experience together with comprehensive job-related experience in own area of expertise to fully competent level Experience of supervising and directing people and other resources to achieve specific end results within limited timeframesWorking ConditionsPrimary working location is seated at a desk Limited lifting of parts and part dunnage maybe required on occasion Overtime required as necessary to achiever program deliverablesWhat differentiates Honda and makes us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Regional Bonus (when applicable)Manager Lease Car Program (No Cost - Car, Maintenance, and Insurance included)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer MobilityEducation Reimbursement for Continued learningTraining and Development ProgramsAdditional Offerings:Lifestyle AccountChildcare Reimbursement AccountElder Care SupportTuition Assistance & Student Loan RepaymentWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Cargill is a trusted salt supplier to a wide variety of industries; our portfolio includes food processing salts, sodium reduction solutions, salt for water softeners and swimming pools, bulk and packaged ice melters, industrial salts, and salt for animal feeding. Working at Cargill is an opportunity to thrive – a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! We depend on creative, responsible, hardworking individuals like you to operate our business successfully!Job Type: Full TimeShift(s) Available: 2ndCompensation: $34.01/hr in the first 90 days, then $37.01/hr after the 90 daysBenefitsMedical, Dental, Vision, and PrescriptionDrug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Tuition ReimbursementEmployee DiscountsPrincipal AccountabilitiesCompleting preventative, predictive, and reactive industrial electrical work throughout the facilityDocumenting all completed work and the conditions found, utilizing maintenance computer software as necessaryInstalling, maintaining, testing, evaluating, and repairing various electrical components and systems including low voltage automation systems, medium voltage motor control circuits, and high voltage (Comprehending mechanical/electrical schematics, blueprints, and/or operation manualsUnderstanding and adhering to all safety policies and proceduresMaintaining a safe and clean work environmentAbility to repair equipment in close proximity to explosivesOther duties as assignedRequired QualificationsMust be eligible to work in the United States without visa sponsorshipMust be 18 years or olderAbility to understand and communicate in English (verbal/written)Basic computer skillsAbility to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodationAbility to work in elevated areas (4 feet and above)Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of Personal Protective Equipment (PPE)Minimum of one year experience troubleshooting and maintaining various electrical components and systems (low, medium, or high voltage)Ability to work underground in a mining environmentCurrent ATF certification or the ability to obtain one upon hireAbility to work overtime including weekends, holidays, or different shifts with advance noticePreferred QualificationsExperience with SAP or a Computerized Maintenance Management System (CMMS)Certified Maintenance Reliability Technician (CMRT) or willing to acquire certificationHeavy equipment/industrial maintenance technical diploma from a trade school, or 3 years equivalent experiencePredictive Maintenance and/or Precision Maintenance CertificationsExperience with high voltage (High school diploma/GED or two-year equivalent work experienceImportant note: Eligible candidates must receive a passing score on a Ramsay standarized test.Routine background check and Alcohol Tobacco and Firearm (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check.Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/VetTo apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeAs a Senior Engineer in the Seat and Package Developmentdepartmentyou are in charge of delivering straightforward engineering assignments (i.e. testing or drawing components/simple part sets) with available guidance, while expanding the breadth of our technical knowledge and starting to deepen your expertise.Key AccountabilitiesEngineering Solution Design – Draft engineering solutions for an assigned component/part (or more complex parts with supervision) and the associated drawings and validation processes, to gather data and provide feedback on their feasibility, costs, quality, and performance.Engineering Specifications – Carry out a range of activities under the guidance (but not direct supervision) of more senior engineers to draft engineering specifications for an assigned component / part and the evaluation of their effectiveness, to inform manufacturing work in the organization and / or of its suppliers. Ensure functional safety standards are met. Data Collection and Analysis – Collate and analyze data using pre-set tools, methods, and formats. Involves working independently.Integration & Correlation – Work within an established framework and with available guidance to integrate assigned parts into the vehicle. Interactions and correlations are typically at the department and division level but may extend beyond it to correlate with other teams (i.e. design, testing, manufacturing, styling, service) for the assignment at hand. Supplier Management – Work with existing suppliers to coordinate requirements, schedule activities, and address issues in a timely manner. May lead guest (suppliers') engineers and / or contractors. There is readily available guidance and support from senior engineers and technical experts. Improvement & Innovation – Identify shortcomings in existing processes, systems, and procedures, and seek ways to optimize and do things more efficiently as a group, but especially at the individual level. Analyze and implement countermeasures to simple problems. Documentation – Prepare moderately complex documentation for review by more senior engineers to record and submit all necessary development / testing / research information as the respective activities mature. Project Management – Work within an established project management plan to achieve specific goals. May support the project schedule, coordinate project meetings, provide regular updates and reports, and contribute in meeting the project budget and timelines. Personal Development – Develop own expertise and capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching. Gain or maintain external professional accreditations where relevant to improve performance and fulfil personal potential. Build proficiency in relevant technology and increase knowledge of external regulations and industry best practices through ongoing education, conferences, and specialist publications.Qualifications, Experience, and SkillsBachelor's degree in Mechanical, Aero, or Automotive Engineering; Industrial Design or Equivalent Industry experience 2+ years of experiencePast experience with CAD software (CATIA V5 or V6 preferred) Proficient in Microsoft Office programs Ability to travel and work overtime as requiredWorking ConditionsPrimary working location is seated at a desk Limited lifting of parts and part dunnage maybe required on occasion Overtime required as necessary to achiever program deliverablesWhat differentiates Honda and makes us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Regional Bonus (when applicable)Manager Lease Car Program (No Cost - Car, Maintenance, and Insurance included)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer MobilityEducation Reimbursement for Continued learningTraining and Development ProgramsAdditional Offerings:Lifestyle AccountChildcare Reimbursement AccountElder Care SupportTuition Assistance & Student Loan RepaymentWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Cargill is a trusted salt supplier to a wide variety of industries; our portfolio includes food processing salts, sodium reduction solutions, salt for water softeners and swimming pools, bulk and packaged ice melters, industrial salts, and salt for animal feeding. Working at Cargill is an opportunity to thrive – a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! We depend on creative, responsible, hardworking individuals like you to operate our business successfully!Job Type: Full TimeShift(s) Available: 2ndCompensation: $34.01/hr in the first 90 days, then $37.01/hr after the 90 daysBenefitsMedical, Dental, Vision, and PrescriptionDrug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Tuition ReimbursementEmployee DiscountsPrincipal AccountabilitiesCompleting preventative, predictive, and reactive industrial electrical work throughout the facilityDocumenting all completed work and the conditions found, utilizing maintenance computer software as necessaryInstalling, maintaining, testing, evaluating, and repairing various electrical components and systems including low voltage automation systems, medium voltage motor control circuits, and high voltage (Comprehending mechanical/electrical schematics, blueprints, and/or operation manualsUnderstanding and adhering to all safety policies and proceduresMaintaining a safe and clean work environmentAbility to repair equipment in close proximity to explosivesOther duties as assignedRequired QualificationsMust be eligible to work in the United States without visa sponsorshipMust be 18 years or olderAbility to understand and communicate in English (verbal/written)Basic computer skillsAbility to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodationAbility to work in elevated areas (4 feet and above)Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of Personal Protective Equipment (PPE)Minimum of one year experience troubleshooting and maintaining various electrical components and systems (low, medium, or high voltage)Ability to work underground in a mining environmentCurrent ATF certification or the ability to obtain one upon hireAbility to work overtime including weekends, holidays, or different shifts with advance noticePreferred QualificationsExperience with SAP or a Computerized Maintenance Management System (CMMS)Certified Maintenance Reliability Technician (CMRT) or willing to acquire certificationHeavy equipment/industrial maintenance technical diploma from a trade school, or 3 years equivalent experiencePredictive Maintenance and/or Precision Maintenance CertificationsExperience with high voltage (High school diploma/GED or two-year equivalent work experienceImportant note: Eligible candidates must receive a passing score on a Ramsay standarized test.Routine background check and Alcohol Tobacco and Firearm (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check.Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/VetTo apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Cargill is a trusted salt supplier to a wide variety of industries; our portfolio includes food processing salts, sodium reduction solutions, salt for water softeners and swimming pools, bulk and packaged ice melters, industrial salts, and salt for animal feeding. Working at Cargill is an opportunity to thrive – a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! We depend on creative, responsible, hardworking individuals like you to operate our business successfully!Job Type: Full TimeShift(s) Available: 2ndCompensation: $34.01/hr in the first 90 days, then $37.01/hr after the 90 daysBenefitsMedical, Dental, Vision, and PrescriptionDrug InsuranceHealth and Wellness IncentivesPaid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Tuition ReimbursementEmployee DiscountsPrincipal AccountabilitiesCompleting preventative, predictive, and reactive industrial electrical work throughout the facilityDocumenting all completed work and the conditions found, utilizing maintenance computer software as necessaryInstalling, maintaining, testing, evaluating, and repairing various electrical components and systems including low voltage automation systems, medium voltage motor control circuits, and high voltage (Comprehending mechanical/electrical schematics, blueprints, and/or operation manualsUnderstanding and adhering to all safety policies and proceduresMaintaining a safe and clean work environmentAbility to repair equipment in close proximity to explosivesOther duties as assignedRequired QualificationsMust be eligible to work in the United States without visa sponsorshipMust be 18 years or olderAbility to understand and communicate in English (verbal/written)Basic computer skillsAbility to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodationAbility to work in elevated areas (4 feet and above)Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of Personal Protective Equipment (PPE)Minimum of one year experience troubleshooting and maintaining various electrical components and systems (low, medium, or high voltage)Ability to work underground in a mining environmentCurrent ATF certification or the ability to obtain one upon hireAbility to work overtime including weekends, holidays, or different shifts with advance noticePreferred QualificationsExperience with SAP or a Computerized Maintenance Management System (CMMS)Certified Maintenance Reliability Technician (CMRT) or willing to acquire certificationHeavy equipment/industrial maintenance technical diploma from a trade school, or 3 years equivalent experiencePredictive Maintenance and/or Precision Maintenance CertificationsExperience with high voltage (High school diploma/GED or two-year equivalent work experienceImportant note: Eligible candidates must receive a passing score on a Ramsay standarized test.Routine background check and Alcohol Tobacco and Firearm (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check.Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/VetTo apply using chat/text, please click Apply Now button OR use this link to create a login to apply.