Job Description:We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements.Key Responsibilities:Define and develop RF system architectures for radar and advanced sensing applications.Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance.Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics.Conduct trade studies and system optimization to balance performance, cost, and schedule.Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems.Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment.Perform root cause analysis of system performance issues and recommend design changes.Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans.Provide technical mentorship to junior and mid-level RF engineers.Compensation Range: $112,900 - $146,800The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Required Qualifications:Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred).10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms.Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity.Demonstrated experience deriving and validating system-level RF budgets.Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar.Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations.Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing.Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters).US Citizenship with the ability to obtain and maintain a security clearance.Preferred Skills:Experience in phased-array architectures and beamforming.Knowledge of military/aerospace standards and environmental testing.Strong communication skills for customer and internal design reviews.Citizenship Requirements:Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Join Our Team as a Quality Engineer at Superior Metals Manufacturing! About the Role: Superior Metals Manufacturing is seeking a highly motivated and detail-oriented Quality Engineer to join our team in Chittenango, NY. This role is integral to our commitment to manufacturing excellence and customer satisfaction. The Quality Engineer will work closely with internal departments, suppliers, and customer representatives to ensure compliance with quality standards and regulatory requirements. In this role, you will champion our Business Management System (BMS) and Advanced Quality System (AQS), driving continuous improvement initiatives and fostering a culture of quality throughout the organization. Location: Chittenango, NY (On-site)Employment Type: Full-TimeSalary: $80,000 - $100,000, but will be evaluated depending on candidates’ knowledge, skills, and abilities.Key Responsibilities: Serve as the primary quality assurance contact for assigned customers, ensuring proactive communication and resolution of quality-related issues.Lead and coordinate technical quality efforts across engineering, manufacturing, and purchasing teams to meet and exceed customer expectations.Conduct and support customer product, system, and qualification audits, ensuring accurate and timely documentation.Assist in the review and disposition of customer contracts, specifications, purchase orders, and technical documentation.Develop, implement, and monitor Corrective and Preventative Action (CAPA) plans to address nonconformances and prevent recurrence.Actively participate in risk assessments, process improvement initiatives, and root cause analysis activities.Promote and support continuous improvement through lean methodologies, quality training, and cross-functional collaboration.Maintain up-to-date knowledge of industry standards and technological advancements in quality systems and analytical tools.Support internal and external audit activities, including AS9100, NADCAP, ISO17025, and A2LA audits.Contribute to internal quality metrics and reporting to track progress against goals.Support the development and implementation of operational training structures; ensure all employees complete required training and remain compliant with quality standards and procedures.Provide input for quote reviews, inspection planning, and development of shop floor instructions.Be available to support operations outside of standard business hours, including evenings and weekends as needed. Required Qualifications: Bachelor’s degree in Engineering, Quality, or a related technical discipline, OR an equivalent combination of education and experience.Minimum 2 years of experience in a quality engineering or quality systems role within a manufacturing environment.In-depth knowledge of quality standards and frameworks, including AS9100, NADCAP, ISO17025, and A2LA.Proficiency in quality tools and methodologies such as root cause analysis, FMEA, 5 Whys, Pareto analysis, and control plans.Strong analytical and problem-solving skills, with the ability to interpret complex technical documents and specifications.Excellent communication skills, with the ability to collaborate effectively across departments and with external stakeholders.Demonstrated ability to manage multiple priorities in a fast-paced, deadline-driven environment.Proficiency in Microsoft Office Suite and familiarity with ERP and quality management systems.Ability to work on-site at our Chittenango, NY facility and accommodate occasional extended hours based on operational needs. Preferred: 3–5 years of experience in the aerospace, investment casting, or metal manufacturing industry.Working knowledge of Six Sigma, Lean Manufacturing, or Theory of Constraints (TOC) principles.Experience with contract review, inspection planning, and regulatory compliance in a customer-facing role.ASQ certification (CQE, CQA, or similar) is a strong plus.Key RelationshipsCollaborate with the Quality Manager, Lab Manager, Sales Manager, Process Engineers, and Manufacturing LeadersRepresent quality interests in customer interactions and internal initiatives Why Join Us At Superior Metals Manufacturing, we take pride in more than just what we makewe take pride in how we make it. By joining our team, you'll be part of a dynamic and growing company where innovation, craftsmanship, and quality are at the heart of our culture. We foster an environment of collaboration and continuous learning, where every team member’s voice matters and contributions are valued. Whether you're developing cutting-edge aerospace components or streamlining a process on the production floor, you’ll be making an impact every day.We offer:Innovative Environment: Work in a state-of-the-art melt shop.Collaborative Environment: Work alongside dedicated professionals in a supportive, team-oriented setting.Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities.Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, paid vacation, bonuses and more.Ready to shape the future of manufacturing quality Apply today and bring your precision and passion to a team where your impact matters.About Us:Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a non-management positionThis is a full time position

Our client, a leader in the manufacturing and machining industry, is seeking a Field Service Engineer to join their team. As a Field Service Engineer, you will be part of the technical support team, providing essential services to customers in the Syracuse, New York area. The ideal candidate will have strong problem-solving skills, excellent communication abilities, and a customer-focused mindset, which will align successfully with the organization. Job Title: Field Service Engineer Location: Syracuse, New York Pay Range: $83,000 - $110,000 What's the Job Provide customers with maintenance, repair, and installation assistance for CNC machine tools, either on location or via telephone. Create and update documentation of technical information and generate ongoing and ad-hoc special reports related to service. Collaborate with Customer Service Engineers to assist in the installation and maintenance of newer product lines. Establish and maintain exemplary communication and customer service relationships with clients. Manage challenging customer situations positively and respond promptly to customer needs while soliciting feedback for service improvement. What's Needed Bachelor's or Associate's Degree in a technical field is preferred. 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools. Experience with various CNC machines, including Fanuc, Mitsubishi, and/or Siemens controls is a plus. Strong verbal and written communication skills with a focus on exceptional customer service. Ability to read mechanical drawings, electrical schematics, and PLC ladder diagrams. What's in it for me Comprehensive benefits package including medical, dental, and vision plans. 401(k) plan with company match to help you save for your future. Opportunities for professional development and training. Supportive work environment that values teamwork and collaboration. Flexible work arrangements with remote options available. Upon completion of waiting period consultants are eligible for: Medical and Prescription Drug Plans Dental Plan Vision Plan Health Savings Account Health Flexible Spending Account Dependent Care Flexible Spending Account Supplemental Life Insurance Short Term and Long Term Disability Insurance Business Travel Insurance 401(k), Plus Match Weekly Pay If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells –creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent.

Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingSupport construction managers in daily project planning and coordination activities.Assist in monitoring project progress to ensure alignment with timelines and budgets.Prepare and review project documents, reports, and schedules as directed.Collaborate with teams to identify and resolve project-related challenges.Conduct site visits to observe construction activities and ensure adherence to safety standards.What Are We Looking ForStrong organizational skills and ability to prioritize tasks effectively.Excellent communication and teamwork capabilities.Problem-solving aptitude with adaptability in dynamic situations.Ability to learn and apply new concepts quickly to support project objectives.Eagerness to gain practical experience in construction management.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$23.00 to $27.00 per hourEqual Opportunity Employer - Minority / Female / Veteran / Disabled.

What this job involves: The Facilities Operating Engineer is responsible for operations & maintenance of building systems and equipment as part of the Facility Maintenance & Operations Team. This role handles routine and emergency plant operations, requiring general knowledge of industry maintenance practices and the ability to work independently.What your day-to-day will look like:Inspect, troubleshoot, repair and adjust equipment to minimize service interruptions and downtimeExecute maintenance and repair work for boilers, HVAC equipment, chillers, cooling towers, air handling units, and building infrastructurePerform complex operating procedures for high pressure steam boilers, lab utilities, emergency generators, and fire pumpsMonitor water chemistry in various systems and make necessary adjustmentsMaintain mechanical spaces for safety and housekeeping to be audit-readyRespond to emergencies, identify problems, and take corrective actionsReview and complete work orders, logs, and documentation in the BMS CMMSEnsure compliance with safety standards, OSHA regulations, and JLL policiesWork Schedule:3x2 rotation: Alternating between day and night shifts every two weeksDay shift: 7am - 7pmNight shift: 7pm - 7am12-hour rotating shifts, including weekends and holidaysOvertime is requiredRequired Qualifications: High school diploma or equivalentMust possess a valid driver's licenseAbility to work independently and plan work without direct supervisionSkills to operate electric hand tools, work on ladders, and lift heavy loadsAbility to operate required equipment and motor vehiclesPhysical capability to perform maintenance tasksPreferred Qualifications:Working knowledge of building automation and system controlsExperience with HVAC/R systems and boilersProficient computer skillsAbility to provide guidance and mentoring to teaBase salary range:$64,000.00 – $73,000.00 USD per year OT hours per year: 208 hoursFor the minimum salary ($64,000):Regular hourly rate: $30.77/hr (based on 2,080 hours per year)OT hourly rate (1.5x): $46.16/hrAnnual OT value: 208 hrs $46.16 = $9,601.28Total minimum compensation: $64,000 + $9,601.28 = $73,601.28For the maximum salary ($73,000):Regular hourly rate: $35.10/hr (based on 2,080 hours per year)OT hourly rate (1.5x): $52.65/hrAnnual OT value: 208 hrs $52.65 = $10,951.20Total maximum compensation: $73,000 + $10,951.20 = $83,951.20Revised salary range including OT: $73,601.28 – $83,951.20 USD per year#BEjobs#HVACjobs#Ejobs#MMjobs#MHVACjobs#OEjobs

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking fora CMM Programmer to join our team! Major Responsibilities: Ensure production goals and ship schedules are metManage staffing levels and requirementsEnsure team members remain productive Follow Leader Standard Work.Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs.Responsible for CMM program development, modification and implementation in close association with Engineering.Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment.Understanding of Geometric Dimensioning and Tolerancing (GD&T). Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data.Ability to accurately complete and train others to complete standard and customer specific layout forms and templatesResponsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validatedAdhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Compensation Range: $105,000.00 - $130,000.00 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management positionThis is a full time position

Job Description:We are seeking a Senior RF Engineer to design, develop, and test discreet transmit/receive (Tx/Rx) RF modules for advanced radar applications. The ideal candidate will have a strong background in RF circuit design, system integration, and performance optimization, with hands-on experience in taking designs from concept to production.Key Responsibilities:Design, simulate, and develop discreet RF Tx/Rx modules for radar systems.Conduct RF system-level analysis, link budget calculations, and trade-off studies.Select and integrate components such as mixers, amplifiers, oscillators, and filters.Perform schematic capture, PCB layout reviews, and work closely with layout engineers to ensure optimal high-frequency performance.Conduct laboratory testing, tuning, and validation of RF modules against specifications.Collaborate with cross-functional teams including firmware, mechanical, and systems engineering to ensure seamless product integration.Support troubleshooting and root cause analysis for performance anomalies.Maintain comprehensive documentation for design decisions, test results, and compliance requirements.Compensation Range: $99,100 - $128,800The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Required Qualifications:Bachelor’s degree in Electrical Engineering, RF Engineering, or related field.5–8 years of experience in RF design, with a focus on radar or similar high-frequency applications (L,S,C, and X band).Proficiency in RF simulation tools (e.g., Keysight ADS, HFSS, CST, or similar).Proficiency in schematic capture and PCBA layout tools (e.g. Altium Designer, PADS, Allegro)Hands-on experience with RF test equipment (VNA, spectrum analyzers, signal generators, power meters).Solid understanding of RF/microwave circuit theory, impedance matching, noise figure, and gain optimization.Experience with PCB design for RF and microwave circuits.Familiarity with military or aerospace standards for RF systems is a plus.US Citizenship and ability to obtain/maintain a security clearance.Preferred Skills:Knowledge of phased-array radar architectures.Electronics packaging conceptsFamiliarity with thermal and mechanical considerations in high-frequency module packaging.Citizenship Requirements:Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3).Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES Demonstrated ability to understand and work with advanced “shop” mathematical concepts.High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming.Excellent analytical and problem solving and resolution capability.Enthusiasm, drive, and work ethic in an ‘on-time’ environment.Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues.Demonstrates a solid understanding of 3D modeling software.Has the ability to create training materials and train shop floor employees.Possesses creative thinking skills and is a detail-oriented personality.Is able to communicate well to other members of the development team.Eliminate waste and elevates productivity using Lean Manufacturing program.Participate in the startup of new equipment.Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers.Adhere to AS9100 and ISO procedures and complianceEnsures all equipment controls are accurately defined and maintained.Contributes to team effort by accomplishing related results as needed.Responsible for adherence to all safety policies, practices and procedures.Ability to work flexible hours and demonstrate reliability.Ability to work at Chittenango facility. QUALIFICATIONS Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred.Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines.Knowledge of 3D modeling software and Gcode a must.Familiar with Motion Control and Vision.Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues.Experience and skill in troubleshooting control systems.Knowledge of GD&T practicesExperienced in interpretation of technical drawingsExperience with Coordinate Measurement Machine programming a plus CPP-Syracuse offers its employees a competitive compensation package which includes medical/dental/vision, Employer subsidized 401K, and life insurance. Check us out at www.cppcorp.com to learn more about our products and CPP Corporation. CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management positionThis is a full time position

Job Description:We are seeking a Senior Director of Engineering Excellence to lead and harmonize engineering practices across the enterprise. Reporting directly to the COO, this role will act as an independent and enabling function dedicated to optimizing processes, tools, and technical training. The Senior Director will collaborate closely with key stakeholders to optimize and streamline enterprise-wide engineering practices and ensure engineering excellence at scale.This role can be based in one of our offices or remotely with the United States, with a preference for candidates located on the East Coast. Travel to our sites will be required.Key Responsibilities:Develop and implement a comprehensive strategy for engineering excellence that aligns with company objectives and operational goals.Identify and drive improvements in engineering processes, workflows, methodologies, and tools to enhance productivity and quality.Serve as an independent strategic advisor and partner to engineering leadership across divisions, ensuring consistent and efficient engineering processes.Lead initiatives for technical training programs, ensuring continuous skill development and knowledge sharing across engineering teams.Collaborate with cross-functional partners, including Division Engineering Leadership, Program Management, Quality Assurance, and Product teams, to support various independent program reviews and governance.Establish and track key performance indicators (KPIs) related to engineering processes, quality, and operational efficiency.Champion a culture of continuous improvement, innovation, and engineering best practices across all levels of the organization.Build a team of engineering excellence professionals, providing mentorship and fostering a high-performance culture.Why Join Us:Opportunity to shape engineering excellence across a fast-growing company.Collaborate with senior leadership in a high-impact, strategic role.Drive meaningful change and innovation in engineering processes and culture.Competitive compensation and benefits package.Compensation Range: $239,600 - $323,400The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Bachelor’s or Master’s degree in Engineering, Computer Science, or a related technical field.10+ years of engineering experience, with at least 5 years in a leadership role focused on process improvement, operational excellence, or engineering management.Proven track record in driving large-scale engineering process transformations and scaling best practices across multiple teams.Strong knowledge of engineering tools, system development lifecycles, and technical training methodologies.Excellent stakeholder management skills with the ability to influence senior leadership and cross-functional teams.Strategic thinker with strong analytical skills and a data-driven approach to decision making.Exceptional communication and interpersonal skills.Citizenship Requirements:Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job Description:Saab, Inc., a global aerospace and defense solutions leader, seeks a creative and results-driven Engineering Operations Analyst for our Surveillance Division. This position will work from our East Syracuse facility and is open to a hybrid work schedule.As an Engineering Operations Analyst, you will support the execution of complex engineering programs by enabling engineering operational (EngOps) efficiency, driving engineering process improvements, developing and utilizing engineering metrics to ensure efficient and predictable engineering performance. You will interface with several parts of the organization including Engineering, Program Management, Quality and Operations.The ideal candidate possesses a multidisciplinary background that combines expertise in engineering, data analysis, and the optimization of engineering processes.The Engineering Operations Analyst is responsible for transforming data into actionable insights to unlock the productivity of the engineering team, analyzing engineering and performance trends.A strong understanding of development processes, program execution and financial dynamics, the Engineering Operations Analyst empowers stakeholders to make informed decisions that enhance operational efficiency and promote growth.Responsibilities include:Maintain and optimize engineering operations metrics (e.g. velocity, on-time delivery, defect rates).Support integration of tools such as JIRA, Confluence, PLM systems, or requirements management platforms.Contribute to process improvement initiatives, focusing on engineering lifecycle efficiency and team scalability.Assist with compliance to engineering standards, design reviews, and documentation requirements.Identify opportunities for improving engineering processes through data analysisCompensation Range: $90,000 - $112,500The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Bachelor’s degree in Systems Engineering, Engineering Management, Industrial, Engineering, Operations Research/Management or related fields.5+ years of experience in similar roleRequired Skills:Foundational experience in engineering and development processes.A solid understanding of data analysis, visualization, and modeling tools.Analytical, critical thinker with an ability to transform raw data into actionable insights.Ability to forecast resource needs (personnel, finances, and capital assets) to achieve business goals.Performance measurement through defined engineering metrics for teams and processesExceptional communication and presentation abilitiesEligibility to obtain a Secret level security clearanceExperience working within a matrix organization­Desired Skills:Business Analytics, Informatics, and Data MiningHands-on experience with Advanced Excel, PowerBI, or similar business intelligence frameworksValue stream, value network, or similar process mapping and improvement experienceCitizenship Requirements:Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.