FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Job ID: 681195BR Date posted: Apr. 01, 2025Description:WHAT WE'RE DOINGLockheed Martin Rotary and Mission Systems (RMS) provides surface, air and undersea applications for U.S. military and international customers. The same expertise we provide to military customers is being applied to increase capabilities of U.S. and international civilian agencies. Our vision for RMS is to set performance standards for our customers worldwide, every day with the best people, best systems, and best servicesWHO WE AREIn this position, the Sr. Electrical Engineer will lead the Electromagnetic Environmental Effects activities and provide EMI design support across multiple programs. They will be performing scientific research, evaluate test plans/procedures, process test data, and perform analyses concerning Electromagnetic Environmental Effects.THE WORKResponsibilities include:• Evaluation of EMI requirements and decomp of system requirements down to lower level specs.• Preparing presentation material and presenting at SRR, PDR, CDR and TRR.• Developing EMI Control Plans, E3 Integration & Analysis Reports, E3 Verification Procedures and Reports and EMI Test Procedures and Reports.• Supporting tests in the EMI lab and troubleshooting EMI out of spec conditions.• Performing design verification analysis and documenting results in an organized comprehensive manner.• Perform RF Co-site analyses and documenting the results.• Meeting task schedule commitments on programs.• Work with the engineering teams on assigned programs• Supporting proposal efforts and developing accurate EEE cost estimates.• Establishing metrics and identifying opportunities optimize and or automate EEE engineering efforts.• Providing technical and project leadership in EEE development, maintaining budgeted cost and schedule.WHO YOU AREYou understand how the many different pieces of a system work together. Our products involve hundreds of people, processes, and systems, and you'll need to figure out how the ones that are relevant to your analysis fit together.Basic Qualifications:• Bachelor's degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 or more years of professional experience• EMI design experience, especially in the areas of grounding, filtering and shielding as it relates to the control of EMI• Strong working knowledge of MIL-STD-461F/G, MIL-STD-464C/D• Experience performing EMI related analysis• Ability to obtain and maintain a Secret DoD Security clearanceDesired Skills:• Strong communication skills, both written and verbal• Ability to support multiple projects in a dynamic environment• EMI test experienceSecurity Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.Clearance Level: SecretOther Important Information You Should KnowExpression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.Ability to Work Remotely: Part-time Remote Telework: The employee selected for this position will work part of their work schedule remotely and part of their work schedule at a designated Lockheed Martin facility. The specific weekly schedule will be discussed during the hiring process.Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.Schedule for this Position: 4x10 hour day, 3 days off per weekPay Rate: The annual base salary range for this position in California and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, Washington or Washington DC is $85,500 - $150,765. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer.Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year.This position is incentive plan eligible.Pay Rate: The annual base salary range for this position in most major metropolitan areas in California and New York is $98,300 - $170,315. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer.Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays.This position is incentive plan eligible.Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They're dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about.As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.Experience Level: Experienced ProfessionalBusiness Unit: RMSRelocation Available: PossibleCareer Area: Systems Engineering: Specialty EngineeringType: Full-TimeShift: First

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Position starts at $32.00 - $40.00 JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES Demonstrated ability to understand and work with advanced “shop” mathematical concepts.High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming.Excellent analytical and problem solving and resolution capability.Enthusiasm, drive, and work ethic in an ‘on-time’ environment.Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues.Demonstrates a solid understanding of 3D modeling software.Has the ability to create training materials and train shop floor employees.Possesses creative thinking skills and is a detail-oriented personality.Is able to communicate well to other members of the development team.Eliminate waste and elevates productivity using Lean Manufacturing program.Participate in the startup of new equipment.Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers.Adhere to AS9100 and ISO procedures and complianceEnsures all equipment controls are accurately defined and maintained.Contributes to team effort by accomplishing related results as needed.Responsible for adherence to all safety policies, practices and procedures.Ability to work flexible hours and demonstrate reliability.Ability to work at Chittenango facility. QUALIFICATIONS Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred.Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines.Knowledge of 3D modeling software and Gcode a must.Familiar with Motion Control and Vision.Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues.Experience and skill in troubleshooting control systems.Knowledge of GD&T practicesExperienced in interpretation of technical drawingsExperience with Coordinate Measurement Machine programming a plus CPP-Syracuse offers its employees a competitive compensation package which includes medical/dental/vision, Employer subsidized 401K, and life insurance. Check us out at www.cppcorp.com to learn more about our products and CPP Corporation. CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management positionThis is a full time position

Job Description:Saab is seeking an experienced and motivated Senior Staff Radar Systems Engineer Analyst to join our team to support electronic support measures (ESM) systems. Saab is currently hiring Radar Systems Engineers to fulfill active program developments, as well as developing radar solutions to bring new capabilities to our customers.The location of this position is flexible; the successful candidate will have the ability to either work remotely in the Northeast region or onsite in the East Syracuse, NY office.Job responsibilities will include:Participate in Transfer of Technology efforts for international Saab products being brought to the US to support US sales and supportProvide technical expertise in configuring, testing and optimization of electronic support measures (ESM) systems.Support customer configuration of the ESM system to ensure all required emitters are properly classified.Collaborate with customers to ensure that the ESM system supports operational needsAssist in troubleshooting and resolving issues related to system performance.Work within cross-functional teams that include systems, software, electrical, mechanical, and test.Provide mentoring and guidance to junior engineers in the organization.Collaborate across the functional organizations within Saab in the U.S. and across the global corporation.Compensation Range: $128,800 - $167,400The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Required:Bachelor's degree in Engineering, Physics, Mathematics or related discipline.15+ years of relevant experience in safety critical or mission critical industries (aerospace, defense/military, medical, automotive, energy / nuclear, etc.).Experience with design, development, assembly, test and integration of complex ground based, shipboard, and/or airborne radar systems.Experience with the DoD architectural framework and design guidance for radar systems and systems engineering processes.Experience with MATLAB (or similar).Experience with radar systems, including radar control and signal processing.International travel requiredStrong interpersonal skills with ability to build effective working relationships in team environment.Excellent communication and presentation skills, able to effectively communicate to senior leadership, customers, and academic communities.Strong work ethic and self-motivation.Excellent analytical and problem-solving skills.Must hold or be able to obtain U.S. DoD SECRET security clearance at a minimum.Desired:Master’s or PhD degree in Engineering, Physics, Mathematics or related discipline.Prior experience with deployments and field testing of DoD ESM systemsRecognized as the prime technical contact (e.g. SME) on a project and has demonstrated direct customer engagement experience, especially in roles as an advisor to management and customers.Experience with digital receiver architecture and digital signal processing techniques.Experience with EM/RF design software (ADS, Microwave Office, HFSS , CST, Genesys).Citizenship Requirements:Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job ID: 686736BR Date posted: Apr. 15, 2025Description:What We're DoingAt Lockheed Martin, we are passionate about innovation and integrity. We believe that by applying the highest standards of business ethics and forward-thinking, everything is within our capacity - and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training, education, and background!The WorkLockheed Martin RMS in Syracuse, NY is seeking a full time experienced professional Radar Systems Engineer. In this role, you will:• Performing requirements analysis and architecture.• Apply advanced technologies, scientific principles, theories and concepts to develop revolutionary system solutions.• Perform functional analysis, design trade studies, requirements allocation, and interface definition to translate customer requirements into hardware and software specifications.• Develop system models and system performance simulations to support system design trade studies and system specifications.• Develop technical solutions to complex problems which require the regular use of ingenuity and creativity.• This position requires a government security clearance. U.S. Citizenship is required.Who We AreLockheed Martin is a global aerospace, defense, and security company dedicated to advancing scientific discovery and harnessing innovation to make the world a safer place. Our RMS business in Syracuse, NY is a hub of talented engineers, scientists, and professionals committed to shaping the future of defense technology. We value collaboration, excellence, and integrity in everything we do. As a part of our team, you will work alongside like-minded individuals dedicated to pushing the boundaries of what's possible.Visit Our Syracuse Site Virtually! Click Here!Why Join UsYour Health, Your Wealth, Your Life Our flexible schedules, competitive pay and comprehensive benefits enable you to live a healthy, fulfilling life at and outside of work.Learn more about Lockheed Martin's comprehensive benefits package here!#rmshotmiljobs#buildradarsBasic Qualifications:• Bachelor's degree in Computer Science or Electrical and Computer engineering or related STEM degree with a minimum of 5 years engineering experience or 3 years of engineering experience with a STEM Masters degree.• Experience with radar systems, signal processing, requirements development, MATLAB modeling and programming, systems engineering processes and product life cycle experience• Mentoring experience in the radar systems engineering domain• Ability to obtain and maintain a U.S. DoD security clearance at the SECRET level. U.S. Citizenship is required.Desired Skills:• Masters degree in Computer Science or Electrical• Experience with model based system engineering: DOORS, Rhapsody, requirements specifications• Experience developing and analyzing radar signal processing algorithms and performance• Experience with Atlassian suite (Jira, Crucible, Confluence)• Experience with Agile Methodologies• Experience with Development and Operations (DevOps) technologies• Excellent organizational and interpersonal skills• Knowledge and/or experience with Electronic Attack (EA)/ Electronic Protection (EP) principles and techniquesSecurity Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.Clearance Level: SecretOther Important Information You Should KnowExpression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.Schedule for this Position: 4x10 hour day, 3 days off per weekPay Rate: The annual base salary range for this position in California and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, Washington or Washington DC is $85,500 - $150,765. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer.Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year.This position is incentive plan eligible.Pay Rate: The annual base salary range for this position in most major metropolitan areas in California and New York is $98,300 - $170,315. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer.Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays.This position is incentive plan eligible.Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.Experience Level: Experienced ProfessionalBusiness Unit: RMSRelocation Available: PossibleCareer Area: Systems Engineering: System ArchitectureType: Full-TimeShift: First

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking fora CMM Programmer to join our team! Major Responsibilities: Ensure production goals and ship schedules are metManage staffing levels and requirementsEnsure team members remain productive Follow Leader Standard Work.Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs.Responsible for CMM program development, modification and implementation in close association with Engineering.Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment.Understanding of Geometric Dimensioning and Tolerancing (GD&T). Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data.Ability to accurately complete and train others to complete standard and customer specific layout forms and templatesResponsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validatedAdhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Pay is depending on experience - $105,000-130,000 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management positionThis is a full time position

Job Description:We are seeking a highly skilled Lead Electrical Engineer with experience in miliary radar, sensor or weapons systems to join our dynamic engineering team. The ideal candidate will be responsible for the system-level design, development, and integration of advanced radar technologies exclusively for defense applications. This position requires deep technical knowledge in RF systems, signal processing, and antenna design, as well as strong problem-solving abilities. This role requires up to 50% travel.Key Responsibilities:Lead the system-level design, development, and testing of radar systems and RF circuits for defense applications.Design and optimize electronics systems and radar architectures to enhance performance and reliability in military environments.Design and optimize antenna systems for enhanced radar performance in defense scenarios.Conduct simulation, analysis, and modeling of radar and RF subsystems for defense systems.Collaborate with cross-functional teams, including mechanical, software, and systems engineers, to develop integrated defense electronic systems.Ensure compliance with industry standards and regulatory requirements, particularly MIL-STD and DoD regulations.Support system integration and field testing of radar systems in defense environments.Compensation Range: $112,900 - $146,800The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Required Qualifications:Bachelor’s or Master’s degree in Electrical Engineering or a related field.8+ years of experience in radar or weapons system design and development for defense applications.Strong knowledge of RF circuit design, microwave systems, and electromagnetic theory.Experience with electronics design, system integration, and radar architectures for military use.Proficiency in MATLAB, Simulink, HFSS, CST, ADS, or similar tools.Hands-on experience with radar testing, calibration, and validation in defense applications.Knowledge of industry standards such as MIL-STD, DoD compliance, and IEEE regulations.Strong problem-solving skills and the ability to work in a fast-paced environment.Willingness to travel up to 50%, including international travel.Preferred Qualifications:Familiarity with power systems in radar and defense applications.Knowledge of FPGA and embedded firmware development for military-grade systems.Familiarity with digital signal processing (DSP) techniques and embedded systems.Prior experience in defense or aerospace industries.Citizenship Requirements:Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Product Engineer (Dimensional) - AerospaceIf you would love to be part of a company that is poised for substantial growth with opportunities for career advancement, then working for CPP may be the right fit for you! Join a results-oriented workplace that strives for success through innovation, collaboration, and teamwork. Employment starts at $70k + depending upon experience Consolidated Precision Products (CPP) Chittenango is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. For more information, please visit https://www.cppcorp.com/WHAT WE OFFER Comprehensive Benefit PlansQuarterly Bonus Opportunity401k with Company MatchEmphasis on Employee EngagementPaid Holidays and Vacation TimeTuition ReimbursementOpportunities for Advancement Summary Product Engineer will be assigned to New Product Development engineering team or Production Engineering team working cooperatively with manufacturing to develop robust processes and tooling to support the company’s growth in the industrial and aerospace investment casting markets. Individuals identified as dimensional will be exposed to the latest tooling concepts using 3D modeling software. Problem solving, the concepts, and tools of problem solving are essential to the job. Engineers will be required to: identify/define problems, perform root cause analysis, and implement solutions to problems that affect yield, rework, and overall quality of the product using a standardized approach (PDCA, Six-Sigma). Knowledge and application of statistics. Occasionally take a leadership role in resolving cross-functional problems. The candidate must be able to travel periodically to other CPP facilities, customers and vendors to provide problem-solving and technical support.Major Responsibilities Develop, maintain, and teach “best practice” investment casting procedures and practices.Use problem solving tools and techniques Responsible for the construction of all dies (shrink factor analysis), gages, and support tooling needed to produce and inspect cores, wax patterns, and castings.Interface with tooling vendors and CPP purchasing to produce a quality tool/die at a competitive price.Responsible for control of dimensional quality of casting. Identify and address process yields using various data analysis techniques (statistical, mathematical, DOE, 6 Sigma, etc.) Strong working knowledge of GD&TAble to interpret customer drawings, specifications, blueprints, models (CAD/NX), and layout reports. Gage R&R, SPC, non-straightening processes and other cost reduction initiativesIdentify, evaluate and implement new process technologies that advance manufacturing and product capabilities.Communicate with tooling vendors to design concepts for wax pattern die, the build of gate dies and support fixtures.Document work procedures and processes.Work closely with other departments to ensure organization objectives are achieved. Maintain a positive work atmosphere with respect and communicate in a professional manner.Good verbal and written communication skills at ease communicating with customer engineering groupsGood verbal communications with all levels of management and manufacturing.Responsible for adherence to all safety policies, practices and procedures.Attendance/ReliabilityAbility to work at the Chittenango facility Qualifications BS in Engineering or 3-5 years of applicable experience (investment casting, tooling design, and CAD [preferably NX] experience).Strong communication skills (written and verbal), PC skills and program management skills.Knowledge of Six Sigma and Lean Manufacturing Principles.Knowledge of structured light tools and programmingExcellent organizational, interpersonal and documentation skills.The successful candidate’s career will show increasing levels of responsibility. Motivated individual with data driven problem solving techniques. About UsConsolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future.This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANSThis is a non-management positionThis is a full time position

Job Description:Saab, Inc.'s Surveillance U.S. division is seeking a Digital Engineer to support multiple product development efforts. If you want to use and grow your FPGA-based digital design skills, this is the opportunity to immediately contribute to cutting-edge design work with critical defense and air traffic management systems. You will be empowered to work collaboratively with a team of talented engineers and support Saab, Inc. Vision: It's a Human Right to Feel Safe.Other opportunities include:Design and Implement FPGA-based communication and digital signal processing algorithms.Selecting methods and techniques for implementing said solutions in leading edge FPGA/SoC devices with high bandwidth memories, and multi-gigabit high speed communication interfaces.Development of advanced digital signal processing algorithms for radar applications.Hands-on work with full scale radar systems.This position will be located in Syracuse, NY with the potential of a hybrid schedule of 3 days in the office 2 days remote.What makes Saab, Inc. unique Our Culture! It is critical to everything we do here and drives how we treat one another, how we serve our customers and is the foundation for every product and solution we deliver.Compensation Range: $80,000- $100,000The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Completed bachelor's degree in an Engineering or related discipline3+ years of experience preferred, inclusive of a strong co-op/internship or military backgroundAbility to read, understand, and evaluate schematicsExperience with FPGA devices (e.g. Intel/Altera, Xilinx)Knowledge of VHDLDemonstrated capability in design simulation with tools like ModelSim/QuestaSimStrong interpersonal communication skillsExperience with Altera FPGA toolset (Quartus, Platform Designer, DSB Builder, etc)Capability with Matlab/Simulink preferredBasic understanding of SoC devices Digital Signal Processing applicationsMust hold or be able to obtain US DoD SECRET security clearanceCitizenship Requirements:Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Job Description:As a Senior Staff Integration and Test Engineer, you will be a recognized expert contributing to Saab Inc.’s Surveillance Division’s business growth.This position will be located at the Headquartered office in Syracuse, NY. Relocation available.Specific responsibilities are as follows:Assemble, integrate, and test complex systems.Coordinate the transfer of technologies, processes, test environments, and proceduresStand up independent test environments based upon known baselinesUtilize automated test methodologies, when applicable, in a verification & production environmentWrite verification analysis reports documenting the results of verification activitiesDemonstrate expertise in troubleshooting, problem decomposition, root cause analysis and risk analysisActively coach and mentor less experienced I&T engineers in an effort to grow the engineering capabilities of the teamContribute to project planning by providing cost estimates, schedule estimates and task assignmentsCompensation Range: $112,900 - $146,800The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:To be successful in this role, you will have the following:Bachelor’s degree in Engineering, Physics, or related discipline is required10+ years of related test experience in a technical/engineering environmentStrong Test Leadership; including test execution, schedule and personnelExperience working with partners on transfer of technologyUnderstanding of integration of hardware and software subsystemsStrong interpersonal skills with ability to build effective working relationships in team environmentStrong written and oral communication skills, able to effectively communicate to senior leadership, customers, and peersStrong work ethic and self-motivationExcellent analytical and problem solving skillsHold or be able to obtain U.S. DoD SECRET security clearanceInternational travel requiredCitizenship Requirements:Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job Description:Saab’s Surveillance U.S. Division in East Syracuse, NY is seeking a Senior Integration and Test Engineer with experience in radar systems. The successful candidate will:Execute software and/or hardware testing at various levels of the build process (e.g. unit, subsystem, and system).Support integration activities, troubleshooting and regression testing.Conduct engineering dry runs and formal test events with customer participation.Identify, generate and validate test tools as necessary.Develop integration & test plans and procedures and supporting test scripts.Write test reports documenting the results of formal test events.Analyze requirements and develop verification strategies for those requirements.Support test environment design activities and build up.Compensation Range: $99,100 - $128,800The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Skills and ExperienceBachelor’s degree in Engineering, Physics, or related discipline is required.10+ years of experience in a technical/engineering environment.Familiarity with Saab products, processes and customers.Familiarity with LabView, DOORs and Matlab.Excellent written and verbal communication skills to collaborate across disciplines and organizations.Strong work ethic and self-motivation.Excellent analytical and problem solving skills.Citizenship Requirements:Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job Description:Saab is seeking an experienced and motivated Senior Staff Radar Systems Engineer to join our team to support research and development of complex radar systems. The successful candidate will participate in design, development, modeling, and simulation in support of the U.S. radar development and modernization.Saab is currently hiring Radar Systems Engineers to fulfill active program developments, as well as developing digital beamformed radar solutions to bring new capabilities to our customers.The location of this position is flexible; the successful candidate will have the ability to either work remotely or onsite in the East Syracuse, NY office.Job responsibilities will include:Participate in Transfer of Technology efforts for products being brought from International Saab locations to the US to support US sales and supportDesign, develop, assemble, integrate, and test complex radar systems.Perform system analysis, trade studies, simulation, modeling, performance budgeting, and design and requirements capture.Design responsibilities may include system, power system management, cooling, and/or signal processing architectures.Develop and maintain an in-depth understanding of system level requirements for assigned systems and the design features that satisfy these requirements.Maintain the documentation baselines for each system variant.Analyze system data to determine adequate system performance under various environmental and operational conditions.Investigate system anomalies and recommend actions to resolve these anomalies.Provide identification, assessment, and resolution of risks during program planning and execution.Work with Technical Leads to ensure technical, cost, and schedule performance is achieved.Work within cross-functional teams that include systems, software, electrical, mechanical, test, and production engineers.Interact with external customers and suppliers as a face of Saab for development and IRAD programs.Provide mentoring and guidance to junior engineers in the organization.Collaborate across the functional organizations within Saab in the U.S. and across the global corporation.Compensation Range: $128,800 - $167,400The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Required:Bachelor's degree in Engineering, Physics, Mathematics or related discipline.15+ years of relevant experience in safety critical or mission critical industries (aerospace, defense/military, medical, automotive, energy / nuclear, etc.).Experience with design, development, assembly, test and integration of complex ground based, shipboard, or airborne radar systems.Demonstrated expertise in any of the following domains: system concept trade studies, operational analysis, feasibility analysis, system performance measures of effectiveness analysis.Experience with the DoD architectural framework and design guidance for radar systems and systems engineering processes.Experience with MATLAB (or similar).Strong interpersonal skills with ability to build effective working relationships in team environment.Excellent communication and presentation skills, able to effectively communicate to senior leadership, customers, and academic communities.Strong work ethic and self-motivation.Excellent analytical and problem-solving skills.Must hold or be able to obtain U.S. DoD SECRET security clearance.International travel requiredDesired:Master’s or PhD degree in Engineering, Physics, Mathematics or related discipline.Recognized as the prime technical contact (e.g. SME) on a project and has demonstrated direct customer engagement experience, especially in roles as an advisor to management and customers.Demonstrated ability to develop advanced technological ideas and see through development to a final product.Experience in supporting technical and cost proposals.Significant technical contribution in RF hardware (receivers and transmitters), DSP design, signal collection, and/or EW programs.Experience with digital receiver architecture and digital signal processing techniques.Familiarity with open architectures (e.g. Modular Open System Architecture).Experience with EM/RF design software (ADS, Microwave Office, HFSS , CST, Genesys).Citizenship Requirements:Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.