FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

What this job involves: The Facilities Maintenance/Carpenter is responsible for performing skilled carpentry tasks for the maintenance, repair, and improvement of commercial and residential properties. This role involves collaborating with a maintenance team to ensure facilities are safe, functional, and aesthetically pleasing. The ideal candidate possesses strong problem-solving skills, attention to detail, and the ability to work independently or as part of a team under minimal supervision.What your day-to-day will look like:Perform routine and preventive maintenance tasks, focusing on carpentry work including framing, drywall installation, finish carpentry, and millworkInspect, diagnose, and repair structural damageConstruct and repair woodwork and other wooden structuresRead and interpret blueprints, sketches, or building plansCollaborate with other maintenance staff and contractors on larger projectsMaintain inventory of carpentry suppliesRespond to work orders and service requests promptlyAssist in other maintenance tasks as requiredWork Schedule:Monday – Friday, 7:15 AM – 4 PMSubject to on-call 24 hours per dayFlexibility to work weekends, holidays, and overtime as requiredPhysical Requirements:Ability to lift 50 poundsPhysical stamina and manual dexterityStanding, walking, bending, and climbing, often for extended periodsWork at heights and perform overhead workAble to work in close spaces (closets, crawl spaces, attics, vaults, etc.)Able to work on roofs of buildingsEnvironmental Conditions:Work in various settings, both indoors and outdoorsPotential exposure to extreme conditionsWork in industrial settings with varying temperatures, noise levels, and other environmental factorsSafety Compliance:Comprehensive knowledge of safe work practicesAbility to recognize, assess, and mitigate or eliminate risksProper use of personal protective equipment (PPE)Participate in safety committees and initiativesPromote a safe working environmentDesired or Preferred Experience and Technical Skills:Journeyman carpenter certification or vocational training in carpentryProficiency with hand tools and power toolsSolid understanding of safety regulations and protocolsExcellent communication skillsRequired Skills and Experience:High School Diploma or equivalent3-5 years of experience as a maintenance mechanic or carpenterAbility to read technical documents and drawingsValid state driver's licenseAbility to work well with a teamPhysical capability to perform required job functions safely#MMjobs

Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform maintenance and repairs on mobile equipment such as loaders, haul trucks, and excavators.Diagnose and troubleshoot mechanical and electrical issues.Conduct regular inspections to ensure equipment is operating safely and efficiently.Maintain accurate records of services and repairs.Collaborate with team members to ensure timely completion of tasks.What Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency with diagnostic tools and equipment.Ability to read and interpret technical manuals and schematics.Excellent communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license and have a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$ 25.00 - 30.00 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Overview: At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $30 - $45 depending on experience.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: Measure, cut, bend, power tools, and machinery (e.g., shears, brakes, presses, and welders).Install and secure sheet metal components, ducts, piping, and systems in various construction or industrial settings.Read and interpret blueprints, technical drawings, and specifications to determine dimensions, materials, and installation procedures.Perform welding and soldering tasks to join metal components, ensuring the structural integrity of assemblies.Use saws, grinders, and other tools to cut, shape, and smooth metal components.Assemble and fit components, ensuring that they align properly and are securely fastened.Inspect finished products for accuracy, quality, and adherence to specifications and make adjustments as needed.Repair or replace damaged sheet metal products, including ventilation systems, ductwork, and roofing.Follow safety guidelines and protocols to maintain a safe work environment, including the use of personal protective equipment (PPE).Maintain inventory of materials and tools, order supplies, and ensure proper storage and handling of sheet metal and components.Performs other duties as assigned.Ability to manage time, delegate assignments and follow through to ensure good results.Ability to understand and follow all company policies and procedures and all applicable State and Federal laws.Ability to use computer tools including E-Mail, Word, etc.PHYSICAL DEMANDS AND WORK ENVIRONMENTThe physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work EnvironmentThis job operates in a manufacturing facility in a climate-controlled environment with physical hazards and noise. This role routinely uses machines to cut and bend steel.Physical DemandsWhile performing the duties of this job, the employee is regularly required to stand, sit, walk, talk, hear, drive, and use hands and fingers. The employee is occasionally required to bend, reach, stoop and kneel. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Qualifications: Education / TrainingHigh school diploma, GED, or completion of trade program or technical school. All required safety certifications.Work Experience / Skills3+ years' experience in sheet metal fabrication, installation, or maintenance. Proficient in using sheet metal tools, including shears, brakes, drills, rivet guns, and welding equipment.Ability to interpret blueprints, schematics, and technical drawings.Strong understanding of measurements, angles, and calculations for precise fabrication and installation.Ability to troubleshoot and find solutions to issues that arise during fabrication or installation.Precision in measurements, cuts, and assembly to meet high standards.Capability to lift heavy materials, work in various positions, and maintain focus for extended periods.Ability to organize tasks.Ability to use good judgment in making work assignments.Ability to ensure safe work practices and ensure compliance with Safety policies.Ability to work with minimal supervision.Knowledge of construction principles and practices, including efficient use of labor hours.Good driving record.Valid driver’s license.Track record of punctuality and dependability. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Journeyman-HVAC, Journeyman-EMS, EMS, Installer, Install, Installation, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, Electrical, pipefitter

What this job involves: JLL is seeking a Maintenance Mechanic for an exciting opportunity at pharmaceutical manufacturing facility in East Syracuse, NY. The role involves performing repair, maintenance, and replacement of various mechanical systems crucial to maintaining production flow throughout the facility. This includes work on hydraulic and pneumatic systems, plumbing components, HVAC systems, plant steam components, leak detection systems, and on-site vehicles and equipment.What your day-to-day will look like:Perform preventative maintenance tasks as specified in Maximo Job plan within given deadlinesAssist the operations team in maintaining and repairing building and equipmentConduct minor plumbing repairs (pneumatic and hydronic)Carry out facility inspections and due diligence efforts, reporting on conditions affecting client occupancy and operationsRespond effectively to all emergenciesComply with safety procedures and maintain good housekeeping in work areasRecognize and propose solutions for safety hazardsEnsure compliance with State, County, and City Ordinances, Codes, and LawsSafely handle, store, and dispose of hazardous materialsParticipate in ongoing technical, safety, and operational process training programsDocument work performance and materials procurement as directedParticipate in on-call rotationConform to GDP standards and properly utilize CMMS systemsWork Schedule: Regular Hours: Monday through Friday, 7:00 AM to 4:00 PMAdditional Requirement: Participation in on-call rotationDesired or Preferred Experience and Technical Skills:Experience with hydraulic and pneumatic systemsKnowledge of plumbing systems and componentsFamiliarity with HVAC systems and their maintenanceUnderstanding of plant steam componentsExperience with leak detection systemsAbility to perform maintenance on various vehicles and equipment (work trucks, forklifts, lifts, etc.)Knowledge of dock levelers and garage door maintenanceFamiliarity with CMMS systems, preferably MaximoRequired Skills and Experience:Strong mechanical aptitude and troubleshooting skillsAbility to read and interpret technical manuals and blueprintsKnowledge of safety procedures and regulationsExcellent communication skills, both verbal and writtenAbility to work independently and as part of a teamPhysical capability to perform the required tasks, including lifting and working at heightsWillingness to participate in on-call rotation and respond to emergenciesAbility to adapt to and comply with GDP standards and CMMS system requirements#MMjobs

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform maintenance and repairs on mobile equipment such as loaders, haul trucks, and excavators.Diagnose and troubleshoot mechanical and electrical issues.Conduct regular inspections to ensure equipment is operating safely and efficiently.Maintain accurate records of services and repairs.Collaborate with team members to ensure timely completion of tasks.What Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency with diagnostic tools and equipment.Ability to read and interpret technical manuals and schematics.Excellent communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license and have a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$ 25.00 - 30.00 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform maintenance and repairs on mobile equipment such as loaders, haul trucks, and excavators.Diagnose and troubleshoot mechanical and electrical issues.Conduct regular inspections to ensure equipment is operating safely and efficiently.Maintain accurate records of services and repairs.Collaborate with team members to ensure timely completion of tasks.What Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency with diagnostic tools and equipment.Ability to read and interpret technical manuals and schematics.Excellent communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license and have a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$ 25.00 - 30.00 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform maintenance and repairs on mobile equipment such as loaders, haul trucks, and excavators.Diagnose and troubleshoot mechanical and electrical issues.Conduct regular inspections to ensure equipment is operating safely and efficiently.Maintain accurate records of services and repairs.Collaborate with team members to ensure timely completion of tasks.What Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency with diagnostic tools and equipment.Ability to read and interpret technical manuals and schematics.Excellent communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license and have a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$ 25.00 - 30.00 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine maintenance and repairs on machinery and equipment.Troubleshoot and diagnose mechanical issues.Conduct preventive maintenance to ensure optimal performance of equipment.Collaborate with other team members to ensure smooth operations.Maintain accurate records of maintenance activities and repairs.What Are We Looking ForHigh school diploma or equivalent.Basic knowledge of mechanical systems and tools.Strong problem-solving skills and attention to detail.Good communication and teamwork skills.Previous experience in a similar role is a plus.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity and elevated noise level.Use of personal protective equipment (PPE) is required.What We OfferPosition pays $25.18 per hour with an additional $1.00 per hour for 2nd shift.Benefits through the Union for Medical, Dental, Vision and Pension.Union paid vacation, sick leave, and holidays.Equal Opportunity Employer-Minority/Female/Veteran/Disabled

The RN Charge Nurse is responsible for overseeing nursing services each shift and functions as a nursing supervisor. This position provides daily supervision of staff on duty during operational hours. Essential Duties and Responsibilities include the following. Other duties and tasks may be assigned. Assist with clinical and operational processes to improve patient health and minimize hospitalizations and missed treatments. Demonstrate effective use of supplies and staff labor hours. Complete and document monthly review of patient medication profiles. Administer medications as ordered by the physician. Assist physician during patient rounds and transcribe and implement physician orders timely. Assist with the implementation of anemia management and medication protocols as requested. Knowledge of and comply with federal, state, local laws and regulations, including health care professionals practice act requirements. Perform duties at all times within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations. May give direct patient care to the extent of performing efficient, safe dialysis, if allowed by state regulations. Responds to all emergencies in clinic. Communicate results of patient assessment, reassessment, and ongoing monitoring to the physician, team members, and others as appropriate to the individual needs of the patient. Maintain collaborative working relationship with Medical Director and physicians. Participate as a member of the Interdisciplinary team in all required patient assessment and care planning activities. Assist in orientation of new staff as a preceptor or in assigning a preceptor. Acts as resource person and participates in implementing and evaluating dialysis services and assures that policies and procedures are updated.Assists Administrator in interviewing, hiring, evaluating, and disciplinary actions of center staffQualifications/Requirements:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Requirements include: Current RN license in applicable state. License must be maintained as current and in good standing. 12 months experience in providing nursing care, including 3 months of experience in providing nursing care to patients on maintenance dialysis. CPR certification required within 90 days of hire. Confirmation of ability to distinguish all primary colors. Demonstrated ability to function in a leadership position and to perform in new and emergent situations with sound judgment. Demonstrated working knowledge of the English language and ability to communicate verbally and in writing. Must have basic computer skills; proficiency in all USRC clinical applications required within 90 days of hire. Must meet any practice requirement(s) for the applicable state. (See addendum for RN Charge Nurse.)