Job Description:We are seeking a Senior RF Engineer to design, develop, and test discreet transmit/receive (Tx/Rx) RF modules for advanced radar applications. The ideal candidate will have a strong background in RF circuit design, system integration, and performance optimization, with hands-on experience in taking designs from concept to production.Key Responsibilities:Design, simulate, and develop discreet RF Tx/Rx modules for radar systems.Conduct RF system-level analysis, link budget calculations, and trade-off studies.Select and integrate components such as mixers, amplifiers, oscillators, and filters.Perform schematic capture, PCB layout reviews, and work closely with layout engineers to ensure optimal high-frequency performance.Conduct laboratory testing, tuning, and validation of RF modules against specifications.Collaborate with cross-functional teams including firmware, mechanical, and systems engineering to ensure seamless product integration.Support troubleshooting and root cause analysis for performance anomalies.Maintain comprehensive documentation for design decisions, test results, and compliance requirements.Compensation Range: $99,100 - $128,800The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Required Qualifications:Bachelor’s degree in Electrical Engineering, RF Engineering, or related field.5–8 years of experience in RF design, with a focus on radar or similar high-frequency applications (L,S,C, and X band).Proficiency in RF simulation tools (e.g., Keysight ADS, HFSS, CST, or similar).Proficiency in schematic capture and PCBA layout tools (e.g. Altium Designer, PADS, Allegro)Hands-on experience with RF test equipment (VNA, spectrum analyzers, signal generators, power meters).Solid understanding of RF/microwave circuit theory, impedance matching, noise figure, and gain optimization.Experience with PCB design for RF and microwave circuits.Familiarity with military or aerospace standards for RF systems is a plus.US Citizenship and ability to obtain/maintain a security clearance.Preferred Skills:Knowledge of phased-array radar architectures.Electronics packaging conceptsFamiliarity with thermal and mechanical considerations in high-frequency module packaging.Citizenship Requirements:Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3).Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Join Our Team as a Quality Engineer at Superior Metals Manufacturing! About the Role: Superior Metals Manufacturing is seeking a highly motivated and detail-oriented Quality Engineer to join our team in Chittenango, NY. This role is integral to our commitment to manufacturing excellence and customer satisfaction. The Quality Engineer will work closely with internal departments, suppliers, and customer representatives to ensure compliance with quality standards and regulatory requirements. In this role, you will champion our Business Management System (BMS) and Advanced Quality System (AQS), driving continuous improvement initiatives and fostering a culture of quality throughout the organization. Location: Chittenango, NY (On-site)Employment Type: Full-TimeSalary: $80,000 - $100,000, but will be evaluated depending on candidates’ knowledge, skills, and abilities.Key Responsibilities: Serve as the primary quality assurance contact for assigned customers, ensuring proactive communication and resolution of quality-related issues.Lead and coordinate technical quality efforts across engineering, manufacturing, and purchasing teams to meet and exceed customer expectations.Conduct and support customer product, system, and qualification audits, ensuring accurate and timely documentation.Assist in the review and disposition of customer contracts, specifications, purchase orders, and technical documentation.Develop, implement, and monitor Corrective and Preventative Action (CAPA) plans to address nonconformances and prevent recurrence.Actively participate in risk assessments, process improvement initiatives, and root cause analysis activities.Promote and support continuous improvement through lean methodologies, quality training, and cross-functional collaboration.Maintain up-to-date knowledge of industry standards and technological advancements in quality systems and analytical tools.Support internal and external audit activities, including AS9100, NADCAP, ISO17025, and A2LA audits.Contribute to internal quality metrics and reporting to track progress against goals.Support the development and implementation of operational training structures; ensure all employees complete required training and remain compliant with quality standards and procedures.Provide input for quote reviews, inspection planning, and development of shop floor instructions.Be available to support operations outside of standard business hours, including evenings and weekends as needed. Required Qualifications: Bachelor’s degree in Engineering, Quality, or a related technical discipline, OR an equivalent combination of education and experience.Minimum 2 years of experience in a quality engineering or quality systems role within a manufacturing environment.In-depth knowledge of quality standards and frameworks, including AS9100, NADCAP, ISO17025, and A2LA.Proficiency in quality tools and methodologies such as root cause analysis, FMEA, 5 Whys, Pareto analysis, and control plans.Strong analytical and problem-solving skills, with the ability to interpret complex technical documents and specifications.Excellent communication skills, with the ability to collaborate effectively across departments and with external stakeholders.Demonstrated ability to manage multiple priorities in a fast-paced, deadline-driven environment.Proficiency in Microsoft Office Suite and familiarity with ERP and quality management systems.Ability to work on-site at our Chittenango, NY facility and accommodate occasional extended hours based on operational needs. Preferred: 3–5 years of experience in the aerospace, investment casting, or metal manufacturing industry.Working knowledge of Six Sigma, Lean Manufacturing, or Theory of Constraints (TOC) principles.Experience with contract review, inspection planning, and regulatory compliance in a customer-facing role.ASQ certification (CQE, CQA, or similar) is a strong plus.Key RelationshipsCollaborate with the Quality Manager, Lab Manager, Sales Manager, Process Engineers, and Manufacturing LeadersRepresent quality interests in customer interactions and internal initiatives Why Join Us At Superior Metals Manufacturing, we take pride in more than just what we makewe take pride in how we make it. By joining our team, you'll be part of a dynamic and growing company where innovation, craftsmanship, and quality are at the heart of our culture. We foster an environment of collaboration and continuous learning, where every team member’s voice matters and contributions are valued. Whether you're developing cutting-edge aerospace components or streamlining a process on the production floor, you’ll be making an impact every day.We offer:Innovative Environment: Work in a state-of-the-art melt shop.Collaborative Environment: Work alongside dedicated professionals in a supportive, team-oriented setting.Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities.Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, paid vacation, bonuses and more.Ready to shape the future of manufacturing quality Apply today and bring your precision and passion to a team where your impact matters.About Us:Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a non-management positionThis is a full time position

Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingSupport construction managers in daily project planning and coordination activities.Assist in monitoring project progress to ensure alignment with timelines and budgets.Prepare and review project documents, reports, and schedules as directed.Collaborate with teams to identify and resolve project-related challenges.Conduct site visits to observe construction activities and ensure adherence to safety standards.What Are We Looking ForStrong organizational skills and ability to prioritize tasks effectively.Excellent communication and teamwork capabilities.Problem-solving aptitude with adaptability in dynamic situations.Ability to learn and apply new concepts quickly to support project objectives.Eagerness to gain practical experience in construction management.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$23.00 to $27.00 per hourEqual Opportunity Employer - Minority / Female / Veteran / Disabled.

House of Sport by DICK'S Sporting Goods is more than just a store. It is a destination, an experience, a place where athletes can experiment and play. A retail store devoted to sport where our community can gather and be inspired. We are fundamentally changing retail by elevating these experiences, delivering first in class service, obsessing over our athletes, inspiring our teammates, and challenging retail norms.We are committed to creating an inclusive and diverse workforce, reflecting the communities we serve. On our team, everyone plays a critical role in creating confidence and excitement by personally equipping athletes to achieve their dreams.If you are ready to obsess over the athlete and make a difference in your community, apply to join our team today!OVERVIEW:ROLE RESPONSIBILITIES:Essential Job Functions:Assist in planning all DSG-led events, in collaboration with Community Leadership team, including cost planning, ROI analysis, staffing coverage, internal and external communication, event day-of execution (setup to tear down) and ensuring all appropriate event waiver needs are in 100% compliance.Become an expert on all event space capabilities; provide information on event space configurations and capacities and recommend the most effective set up for the event type based on event space availability.Work with Community & Events Manager to ensure events are within budget. Work together to identify opportunities for efficiencies and cost savings on all events.Create event documentation to include: Run of Show, Event Recaps, Emergency Information card and Rental Agreements.Oversee the event experience and guide our athletes to have fun and participate safely.Leads and monitors reservations scheduling tool.Manage the needs of Field events, assisting with hiring referees, equipment maintenance, field/ice rink maintenance, (if applicable).Coordinate event entertainment, including music selection, guest speakers, etc.Maintain cleanliness/maintenance & equipment needs for store events.Community & Customer FocusBuild relationships with local schools, community organizations, sports leagues, home school organizations, and vendors for event partnership.Work with the Community Team to bring clinics, camps, and afterschool programming to the store.Create sales opportunities for future events during client liaisons and events.Attend, monitor, and gather feedback from events to ensure athlete satisfaction.Provide a high-touch, innovative experience for all seasonalprogramming. Scheduling & Operations: Maintain all Field equipment and other programmable spaces for proper use and cleanliness. Must safely and effectively remove snow from ice surface and surrounding areas to maintain a safe and clean environment for our athletes (if applicable). Work with store management to offer sales and operations support when needed.Adjust priorities and manage time wisely in a fast-paced, ever-changing environment.Adhere to established policies and procedures related to safety, loss prevention and standard operating procedures, as well as to laws and guidelines of external governing entities.Understand and follow all ice rink policies and procedures in the training by Magic Ice (if applicable).Ensure proper operation of all ice venue special events, open skating and holiday promotions (if applicable).Sharpen rental and athlete skates as needed (if applicable).Perform other tasks as assigned.Mentoring & Developing Talent: Ensure all events are staffed and well communicated to teammates while level setting expectations of Athlete engagement and activation execution.Assist with training teammates on Company procedures and programs; this includes new teammate training and cross-training current teammates.Train and mentor new hires by sharing experience, knowledge, and best practices. Share timely feedback on projects, tasks, and deliverables (on the job training)Provide outstanding teammate training and coaching to deliver on the store vision and experience.QUALIFICATIONS:High School Diploma or equivalent1-3 years experienceAt least 2 years of customer service experience preferred.Previous experience in event planning experience, a mix of profit & non-profit experience is ideal#DSGT1Targeted Pay Range: $18.50 - $28.25. Starting rate of pay may vary based on factors including, but not limited to, location, experience and position offered. The actual hourly rate will equal or exceed the required minimum wage applicable to the job location.DICK'S Sporting Goods complies with all state paid leave requirements. We also offer a generous suite of benefits. To learn more, visit www.benefityourliferesources.com.Based on the location of the House of Sport, you may be required to submit relevant state mandated clearances to supervise minors.

Job Description:We are seeking a Level 4 Senior Staff RF Antenna Engineer with deep expertise in antenna systems, element/mutual coupling, and free-space radiation performanceand the proven ability to rapidly evaluate, troubleshoot, and optimize existing antenna designs. This is a high-impact, fast-response role supporting programs where performance shortfalls must be diagnosed and corrected on aggressive timelines. You will bridge simulation, measurement, and practical implementation to deliver solutions that workquickly and reliably.Key Responsibilities:Rapidly assess existing antenna and array designs for performance gaps against requirements.Diagnose and resolve issues related to mutual coupling, beam distortion, impedance mismatch, and bandwidth limitations.Recommend and implement design modifications for immediate performance improvements.Perform accelerated free-space radiation pattern measurements and compare results against simulations.Run high-fidelity EM simulations (HFSS, CST, FEKO, or similar) under compressed schedules for fast validation.Evaluate antenna integration into host platforms for mechanical, thermal, and electrical compatibility.Support urgent production and field troubleshooting, including on-site technical interventions when required.Collaborate with RF systems engineers to ensure antenna performance aligns with system-level budgets and phase stability.Produce clear, actionable evaluation reports for program stakeholders, often under short deadlines.Mentor junior engineers in rapid diagnostic and problem-solving methods.Compensation Range: $112,900 - $146,800The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Required Qualifications:Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred).10+ years of antenna design and/or evaluation experience in radar, communications, or EW systems.Expert understanding of antenna theory, EM propagation, polarization, and impedance matching.Proven ability to mitigate mutual coupling in dense or phased-array configurations.Experience delivering high-quality antenna evaluations and solutions under aggressive timelines.Proficiency with EM simulation tools such as HFSS, CST, FEKO, GRASP.Hands-on experience with antenna measurement in both anechoic chambers and open-air ranges.US Citizenship with ability to obtain and maintain a security clearance.Preferred Skills:Experience with low-observable and conformal antenna designs.Familiarity with wideband, multiband, and frequency-agile antenna systems.Exceptional problem-solving and communication skills for high-pressure, time-sensitive projects.Citizenship Requirements:Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job Description:Saab, Inc., a global aerospace and defense solutions leader, seeks a creative and results-driven Engineering Operations Analyst for our Surveillance Division. This position will work from our East Syracuse facility and is open to a hybrid work schedule.As an Engineering Operations Analyst, you will support the execution of complex engineering programs by enabling engineering operational (EngOps) efficiency, driving engineering process improvements, developing and utilizing engineering metrics to ensure efficient and predictable engineering performance. You will interface with several parts of the organization including Engineering, Program Management, Quality and Operations.The ideal candidate possesses a multidisciplinary background that combines expertise in engineering, data analysis, and the optimization of engineering processes.The Engineering Operations Analyst is responsible for transforming data into actionable insights to unlock the productivity of the engineering team, analyzing engineering and performance trends.A strong understanding of development processes, program execution and financial dynamics, the Engineering Operations Analyst empowers stakeholders to make informed decisions that enhance operational efficiency and promote growth.Responsibilities include:Maintain and optimize engineering operations metrics (e.g. velocity, on-time delivery, defect rates).Support integration of tools such as JIRA, Confluence, PLM systems, or requirements management platforms.Contribute to process improvement initiatives, focusing on engineering lifecycle efficiency and team scalability.Assist with compliance to engineering standards, design reviews, and documentation requirements.Identify opportunities for improving engineering processes through data analysisCompensation Range: $90,000 - $112,500The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Bachelor’s degree in Systems Engineering, Engineering Management, Industrial, Engineering, Operations Research/Management or related fields.5+ years of experience in similar roleRequired Skills:Foundational experience in engineering and development processes.A solid understanding of data analysis, visualization, and modeling tools.Analytical, critical thinker with an ability to transform raw data into actionable insights.Ability to forecast resource needs (personnel, finances, and capital assets) to achieve business goals.Performance measurement through defined engineering metrics for teams and processesExceptional communication and presentation abilitiesEligibility to obtain a Secret level security clearanceExperience working within a matrix organization­Desired Skills:Business Analytics, Informatics, and Data MiningHands-on experience with Advanced Excel, PowerBI, or similar business intelligence frameworksValue stream, value network, or similar process mapping and improvement experienceCitizenship Requirements:Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job SummaryThe Licensed Practical Nurse (LPN) provides general nursing care to patients, families and caregivers in the Medical Group practices.The Licensed Practical Nurse (LPN) assists and advocates for the patient and families health in support of the patient centered approach and delivery model of care, and is an active care team member.Responsible for collaborating with physicians/ providers , registered professional nurses and multidisciplinary care team members.A Licensed Practical Nurse (LPN) can perform tasks and responsibilities within the framework of case finding, health coaching, and supportive care under the direction of the registered professional nurse or licensed physician or licensed health care provider.Nursing shall perform in accordance with the standards outlined for Licensed Practical Nurse (LPN) in the NYS Education Law, NYS Office of the Professions, andby the State Nurse Practice Act.A Licensed Practical Nurse will follow the mission, vision, I-CARE values, policies and procedures of Mohawk Valley Health System.Core Job ResponsibilitiesGather patient measurements and collect patient dataRecordand reportpatient findingsPrepare patient for patient examination and treatmentAssistswith examination and treatmentsPerformtasks within the framework of supportive care, under the clinical direction of licensed health care provider or registered professional nurseSupportself-care , self- management and the established plan of care.Utilize standard precautions and practice at all timesMaintain equipment, supplies, inventory, and a safe and clean work environmentMaintain technical knowledge by attending educational workshops, mandatory in-services; reviewing publications and participating in department committee meetings or work groupsEngage in quality improvement initiatives including continuing education, participation in system-wide and department specific teamsMaintain a cooperative relationship among the healthcare team by effectively communicating informationRespond to patient requests, communicates effectively to the licensed health care provider who can fulfill the patient requestEducation/Experience RequirementsRequired:Graduate of an accredited school of licensed practical nursing programPreferred:Bachelors or Masters of Science in Nursing from accredited nursing programLicensure/Certification RequirementsRequired:Current New York State licensure as a Licensed Practical Nurse;Basic Life Support Certification - Must receive BLS certification within 6 weeks of hire dateDisclaimerQualified applicants will receive consideration for employment without regard to their age, race, religion, national origin, ethnicity, age, gender (including pregnancy, childbirth, et al), sexual orientation, gender identity or expression, protected veteran status, or disability.Successful candidates might be required to undergo a background verification with an external vendor.Job DetailsReq Id 94980Department MG - PRIM - WATERVILLEShift DaysShift Hours Worked 8.00FTE 1Work Schedule HRLY NON-UNION-8 HREmployee Status A1 - Full-TimeUnion Non-UnionPay Range $21 - $31.69 Per Hour

Take your CDL-A career further! Our drivers work hard to move, supply, and provide for America's favorite brands. Being reliable and dedicated to safety has defined our success as an industry leader for 130+ years. Join McLane and discover the driving difference-we provide you with industry-leading pay, strong and secure client relationships, and get you home safely and more often. That's why our drivers build long-lasting careers with us. Benefits you can count on: Pay Rate: Drivers make $65,000 to $95,000, first year average. Sign-on bonus: Up to $10,000Day 1 Benefits: medical, dental, and vision insurance, FSA/HSA and company-paid life insurance. Paid holidays: earn vacation time, and sick leave accrual from day one. 401(k) Profit Sharing Plan after 90 days. Additional benefits: pet insurance, maternity/paternity leave, employee assistance programs, discount programs, tuition reimbursement program, and more! What you'll do as a CDL-A Delivery Driver: Inspect tractor-trailer for defects pre/post trip and submit DOT inspection report indicating condition. Inspect bill of lading and store keys for accuracy in off-hour delivery. Drive tractor-trailer to destination, applying knowledge of commercial driving regulations and skill in maneuvering vehicle on the road and on customer premises. Maintain driver log (Manual or Peoplenet) according to DOT regulations, documenting delivery receipt, product temperatures and exceptions. Unload trailer, delivering product into customer premises. Other duties as assigned. Qualifications you'll bring as a CDL-A Teammate: At least 21 years of age Valid Class A commercial driver's license (CDL-A) At least 1 year or 50,000 verifiable miles of tractor-trailer driving experience Must meet McLane's MVR and risk rating qualifications This position requires the ability to read, write, and understand English at a level sufficient to perform job-related tasks effectively and safely. This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with workplace safety and operational standards.Fit the following We want you here! Safety-focused Reliable Adaptable Dedicated Moving America forward - together. We've been forging our path as a leader in the distribution industry since 1894. Building an expansive nationwide network of team members for 130+ years has allowed us to stay agile for our clients across the restaurant, retail, and e-commerce industries. We look to the future and are ready to continue making industry-defining moves by embracing the newest technology into our practices, continuing team member training, and emphasizing our people-centered culture. Candidates may be subject to a background check and drug screen, in accordance with applicable laws. All applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. For our complete EEO and Pay Transparency statement, please visit https://www.mclaneco.com/legal/employment/

Make a Difference on Your Own Schedule and Terms!Summary The Certified Mobile Research Nurse is a Registered Nursing per diem/PRN position for EmVenio. An EmVenio CMRN is responsible for setting appointments within the required visitation window to complete mobile visits for study participants. You'll work cooperatively with Clinical Project Managers, Coordinators, and site personnel to complete visits and submit accurate source documentation. We are looking for CMRNs to visit an Adultpopulation who can perform the following skills during a mobile visit: Physical assessmentPhlebotomy6 and 12 lead ECGPRN visits must be completed during standard business hoursRequired QualificationsMinimum of two (2) years of experience as a Registered Nurse (RN) Two (2) years' experience in starting and performing Phlebotomy/Peripheral Blood Draw, IVs, and Subcutaneous Injections (date of last practice within 6 months, preferred) One (1) year of experience collecting vital signs, ECG, urine samples, and performing urine pregnancy tests Must have and maintain a current, unrestricted license as a RN in the state(s) of practice Skilled at collecting accurate, detailed patient records including documentation of medical history and medication charting Excellent observational, verbal, written communication, and problem-solving skills Must have and maintain a current CPR certification Must have and maintain a current TB Test Preferred QualificationsGraduate of an accredited school of professional nursing Licensed driver with good driving record and automobile insurance in accordance with state and/or agency requirements and in good repair An ability to speak other languages Personal IncentivesGain CMRN GCP training certification Be a member of our general staffing pool No research experience required, on the job training provided Contribute to advancements of truly life changing treatments Standard Rate: $65.00 Hourly plus commute, mileage, training, and administrative pay.Please contact Ashley Sin at x486 or at today to learn more about our opportunities where you can make a difference in your own career! Professional Case Management is an Equal Opportunity Employer.

WHEN YOU WORK FOR US, WE WORK FOR YOUWith Titan Medical, you gain access to thousands of travel nursing and allied health jobs across the country. You also get unmatched service. From the moment you apply, your recruitment specialist is focused on youhelping you build your profile to increase your chances of landing your perfect assignment. That includes developing your rsum, skills checklist and references.Travel Nurse RN - ERWeekly Gross Pay: $2116.00 - $2316.00Location: Oneida, NY, United StatesStart date: 9/22/2025Assignment length: 13 WeeksMinimum years of experience: 2 - previous travel experience is not requiredJob type: TravelerShift: Day (3x12)Certifications: BCLS/BLS/ACLS/PALS/TNCCTitan Medical is looking for travelers to fill a Travel ER position for a 13 week assignment in Oneida, NY! Call Titan for additional details.