Department/Unit:Education And DevelopWork Shift:Day (United States of America)Salary Range:$78,773.63 - $122,099.12The Education Specialist is responsible for leading in the design and development of systems that support staff involvement in practice, research, education,and quality decisions; promoting a collaborative environment where nurses practice at the highest level of licensure. This position is responsible forparticipating in the design, development and implementation of orientation and continuing education programs for individuals and groups within the nursingorganization. The educational outcomes of programming are evaluated and linked to the quality process and patient care outcomes.The Education Specialist is responsible for leading in the design and development of systems that support staff involvement in practice, research, education, and quality decisions; promoting a collaborative environment where nurses practice at the highest level of licensure. This position is responsible for participating in the design, development and implementation of orientation and continuing education programs for individuals and groups within the nursing organization. The educational outcomes of programming are evaluated and linked to the quality process and patient care outcomes.Collaborates with Hospital based clinical leaders and educators to promote competency, ongoing learning, high quality, safe patient care.Qualifications:BSN Required, MSN/DNP strongly preferredRecent acute care experience requiredRecent Emergency Department or Critical Care experience strongly preferredBLS Certification requiredACLS and PALS Certification strongly preferredPrevious AHA or ENA Instructor credentials strongly preferred.Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer.This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that:Access to information is based on a “need to know” and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

Please note, this position is located at Stratton Mountain Resort inStratton Mountain, VT Year RoundAt Stratton, we are a team of people who work extremely hard and take our jobs very seriously, without forgetting how to laugh and have fun. We choose people that display the talent and attitude that exemplify the high level of service our guests expect and deserve. Our vision is to be A BOLD MOUNTAIN COMMUNITY CULTIVATING EXTRAORDINARY EXPERIENCES. BESIDES GETTING PAID TO WORK AT AN INCREDIBLE RESORT, WHAT'S IN IT FOR YOU Stratton's team members are rewarded with job experience, opportunities for career advancement and some great lifestyle perks (eligibility based on employee type).Alterra Mountain Company Employee Pass - free lift access & discounts at Alterra resortsFree or discounted multi-resort dependent season passesFree or discounted IKON pass Discounted golf & fitness center membershipsEmployee childcare rates & discounted seasonal programsRetail + F&B discountsFriends & family ticketsOnsite medical clinicMedical, dental, vision, life, disability, EAP, HSAs, & FSAs 401(k) plan with company matchDiscounted tuition planPaid parental leavePaid sick time, FTO, VacationAdditional perks & benefits for year round employeesPOSITION SUMMARY The Infant Head Teacher is responsible for meeting the daily needs of infants 6 weeks to 15 months. The Infant Head Teacher must be able to provide excellent guest service by encouraging engagement among all children in the classroom, and continuously communicating with parents/guardians about their child's experience during that given day. The Infant Head Teacher is responsible for observing and documenting children's development as well as creating developmentally appropriate curriculum. Teachers must maintain the facility in a healthy and safe working order, while observing all state mandated regulations. This is a full-time year-round, benefit eligible position. Starting wage for this position is $24.00/hour.ESSENTIAL DUTIESBuild relationships with children and families through daily interactionsEnsure age appropriate activities and schedules are followed in your classroomAssure all infants needs are met and documented through the dayObserve and assess infants development over timeDevelop and implement age appropriate curriculumMaintain a cooperative and supportive attitude with other staff membersBe knowledgeable of the state child care rules and regulations and follow as outlinedAttend monthly meetings with Childcare ManagerComplete annual professional developmentPerform administrative tasks as neededTrain and ensure all childcare staff knows emergency policies and proceduresParticipate and assist in, coordination of emergency proceduresOther duties as assignedEDUCATION & EXPERIENCE REQUIREMENTS Education:High School Diploma, or equivalent requiredChild Development Associate (CDA) Certificate, or Vermont Career Ladder III, requiredBachelor or Associates degree in Early Childhood Education, Child Development or 21 College credits in a related fieldExperience:At least 1 year experience working in a licensed child care centerExperience with caring for infantsQUALIFICATIONS, KNOWLEDGE, SKILL AND ABILITY REQUIREMENTSMust be 20 years of age, or olderMust meet or exceed Vermont Standards for a Teacher Associate or higherFirst Aid & CPR certificationStrong communication skills, written and verbalPHYSICAL DEMANDS AND WORKING CONDITIONSMust be able to lift 40 pounds, on a regular and repeating basisMust be able to handle high noise levels and stressful environmentsThis position may be required to work evenings, weekends, and holidaysTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. An Equal Opportunity Employer

Why Join Aveanna Education Services Want to make a difference So do we! We believe that everyone is capable of growth and development, and if people are not growing and developing, it’s because they haven’t been given the proper support (yet). That’s where we come in! We are here to help each person with whom we work grow, develop, and become a little bit better today than they were yesterday. Apply your skills as an SLP in a public-school setting and begin making a difference in the lives of students with special needs.Why Join Us Health, Dental, Vision and Company-Paid Life InsurancePaid Time Off AvailableFlexible scheduling- full-time, part-time, or PRN. Days, nights, and weekend shifts we will work with your availability!24/7 Local support from operators and cliniciansAveanna has a tablet in each patient’s home allowing for electronic documentationCareer Pathing with opportunities for skill advancementWeekly and/or Daily PayEmployee Stock Purchase Plan with 15% discountEmployee Relief Fund*Benefit eligibility can vary and is dependent upon employment status and employment locationJoin Aveanna Education Services as a Long-Term Certified Special Education Teacher! We have exciting opportunities at a public school serving students ages 2–15 with autism, developmental disabilities, and communication disorders.As a Special Education Teacher, you'll play a key role in creating a positive and effective academic environment tailored to each student’s needs. Your responsibilities will include developing and implementing lesson plans, leading classes, writing and executing IEPs, evaluating student progress, and collaborating with related-services staff to ensure students thrive.Help make a lasting impact in the lives of these studentsapply today!Develop and implement lesson plans and modify instruction to meet the individual needs of studentsProvide behavioral managementMonitor, evaluate and report on students' progressAttend and participate in meetingsSTATE SPECIFIC REQUIREMENTSTo work as a special education teacher in the state of Massachusetts, you need to meet the following requirements.Special Education Degree: A Bachelor's of Science in Education with an emphasis in teaching students with special needs is recommended.Required Tests and Endorsements: You must pass several tests to gain Special Education credentials.Background Checks: Comprehensive background checks , including fingerprinting, are required for student safety.Academic Verification: Provide proof of completing an accredited educator preparation program.As an employer accepting Medicare and Medicaid funds, employees must comply with all health-related requirements in all relevant jurisdictions, including required vaccinations and testing, subject to exemptions for medical or religious reasons as appropriate.Notice for Job Applicants Residing in California

Department/Unit:Education And DevelopWork Shift:Day (United States of America)Salary Range:$78,773.63 - $122,099.12Salary range will be prorated based on hours worked.The Education Specialist is expected to utilize their knowledge and skills to accomplish the goals of the organization. The Education Specialist achieves this goal through the roles of educator, performance consultant, and leader in collaboration with members of the Hospital, the Center, and the community.Hours:Monday-Friday, 08:00-4:30pm with occasional off-shift and weekend rotation to support educational needs of AMC.• Supports preceptors in developing orientation programs for new Staff.• Responsible for staff orientation and continued development.• Demonstrate principles of conflict resolution and promote consensus building.• Represents Case Management/Social Work at organizational committee meetings as directed• Serves as AMC Liaison with executive leadership interfacing with continuum of care providers and public agencies including: SNF Administrators, vendors, CHHAs, LDSS-APS/CPS, NYS-OMH, OPWDD, MHLS among other regulatory agencies• Interprets laws, policies, operational procedures and objectives. Ensures compliance with regulatory and legal requirements.• Assists in the development of policies and procedures, standards of care and practice, and in the monitoring processes in relations to those standard• Demonstrates advanced knowledge and expertise in CMS, DOH, OMH, OPWDD laws and regulations pertaining to access, delivery, transition and financing across the continuum of care.• Expertise in entitlement eligibility, managed care, guardianship, immigration and naturalization laws.• Ensures efficient and effective service provision within regulatory and professional standards.Minimum Qualifications:• Master’s Degree (MS-Nursing strongly preferred).• Board Certification in relevant specialty- strongly preferred.• A Master’s Degree in Social Work with State licensure or Master’s degree in Nursing or a Master’s degree in Education with a Bachelor’s of Science in Nursing, or a Master’s degree in an allied health field from an accredited institution required.•3 - 5 years of direct critical care experience preferred• Experience in the field of Clinical Social Work or Nursing with experience in Case Management, Utilization Review and Discharge Planning.• BLS Certification.• Demonstrated clinical competency in a nursing or allied health specialty. Previous experience in education program development and teaching preferred.• Ability to create collegial and collaborative relationships internally and externally.• Ability to read and analyze documents.• Ability to listen well, to engage in interactive dialogues with others, and facilitate communication among groups.• Effective organizational, oral and written communication skills, problem solving, program development, computer skills, strong leadership and team building skills.The Education Specialist provides leadership and direction to support high performing staff through the development of educational activities that meet the needs of the nursing organization.Principal Position ResponsibilitiesThe Education Specialist is responsible for leading in the design and development of systems that support staff involvement in practice, research, education,and quality decisions; promoting a collaborative environment where nurses practice at the highest level of licensure. This position is responsible for participating in the design, development and implementation of orientation and continuing education programs for individuals and groups within the nursing organization. The educational outcomes of programming are evaluated and linked to the quality process and patient care outcomes.Ideal Candidate will have Pediatric nursing experience. Candidates without pediatric experience can still apply and may be consideredThank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer.This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that:Access to information is based on a “need to know” and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

Department/Unit:Perioperative PRNWork Shift:Per Diem (United States of America)Salary Range:$78,773.63 - $122,099.12Position will focus on education of current staff and orientation of new staff. The position includes auditing, and is part of the leadership team.Salary Range $71,547.00 - $118,053QUALIFICATION REQUIREMENTS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily as outlined in the attached annual competency assessment. Where feasible, reasonable accommodations may be made to enable qualified individuals with disabilities to perform the job’s essential functions.EDUCATION:A Bachelor's degree in Nursing. Must hold current New York State Registered Nurse registration and certification or eligible for licensure in New York State. EXPERIENCE:Demonstrated clinical competence and in depth knowledge in specialty area.COMMUNICATION SKILLS:Creates a collegial and collaborative environment among all members of the healthcare team. Demonstrated effective leadership, teaching, research and communication skills.PROFESSIONAL SKILLS:Demonstrates responsibility and accountability for decisions. Utilizes problem-solving and decision making skills. Coaches and mentors staff. Researches and develops specialty specific practice standards and communicates them to other staff in their area of specialty.REASONING ABILITY:Ability to identify problems collects data, establish facts, and draw valid conclusions. Ability to improve job performance through continuing education.PHYSICAL DEMANDS:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.While performing the duties of this job, the employee is regularly required to stand, walk, use hands to probe, handle, or feel objects, tools, or controls, reach with hands and arms, and speak and hear. The employee is occasionally required to sit and stoop, kneel, or crouch.The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus.WORK ENVIRONMENT:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.While performing the duties of this job, the employee may be subject to infectious materials and chemicals (see unit specific MSDS information).The noise level in the work environment is usually moderate.This job requires as an essential function that the majority of the time the employee be physically on-site as the work cannot be done from a remote location.OTHER REQUIREMENTS:All job requirements listed indicate the minimum level of knowledge, skills, and/or ability deemed necessary to perform the job proficiently. This job description is not to be construed as an exhaustive statement of duties, responsibilities, or requirements. Employees will be required to perform any other job-related instructions given by their supervisor subject to reasonable accommodations.Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer.This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that:Access to information is based on a “need to know” and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

Join Our Community of Food People!Ready to build a career with a company that’s leading the food service industry We Help You Make It!Our Diesel Mechanics start at $33.00 – $45.00/hour depending on experience!401K with 2% automatic company contribution plus company match up to an additional 6%.Medical Benefits Start Day One!We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage. $5,000 Retention bonus!Paid vacation time, sick, and personal time.Employee uniforms provided.$125 Quarterly tool allowance. $500.00 annually.Employee referral program. $1,000 per referralStrong Safety Culture, newer equipment, and excellent local leadership.Schedule:Sunday - Thursday Nights4:00 PM - 12:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES Independently troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within DOT standards.Mentor other maintenance shop personnel.Receive road calls, assign third party vendor, and work with business partners to triage appropriate plan of action including equipment swaps etc.Utilize fleet maintenance software system tablet to fully document equipment repair and parts used.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Other duties as assigned by manager.SUPERVISION:N/ARELATIONSHIPSInternal: All Fleet Technicians, Drivers, Coordinators and ManagerExternal: Dealer Service ManagersWORK ENVIRONMENTOnsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility.MINIMUM QUALIFICATIONS Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic.Diagnostic and troubleshooting ability using fleet maintenance software.Successfully demonstrated independent analytical and problem-solving skills.Must furnish own personal hand tools.Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.EDUCATIONHigh school diploma or equivalent required.CERTIFICATIONS/TRAININGBrake certificationLICENSESMust possess a valid driver's license.PREFERRED QUALIFICATIONSJPRO software experience.Welding abilityKnowledge with electrical schematicsBasic Microsoft Excel and Word skills.Leadership experience or qualificationsValid Class A CDL license and DOT certificationEPA 608 (Type 2 or Universal) certificationPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyThe following information is provided in accordance with certain state and local laws. Compensation depends on experience, geographic locations, and other factors permitted by law. In New York, the expected compensation for this role is $33.00 – $45.00/hour This role is also eligible for overtime compensation. Benefits for this role include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift)2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs)3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel)4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps)5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)

Join Our Community of Food People!Ready to build a career with a company that’s leading the food service industry We Help You Make It!Our Diesel Mechanics start at $33.00 – $45.00/hour depending on experience!401K with 2% automatic company contribution plus company match up to an additional 6%.Medical Benefits Start Day One!We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage. $5,000 Retention bonus!Paid vacation time, sick, and personal time.Employee uniforms provided.$125 Quarterly tool allowance. $500.00 annually.Employee referral program. $1,000 per referralStrong Safety Culture, newer equipment, and excellent local leadership.Schedule:Sunday - Thursday Nights4:00 PM - 12:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES Independently troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within DOT standards.Mentor other maintenance shop personnel.Receive road calls, assign third party vendor, and work with business partners to triage appropriate plan of action including equipment swaps etc.Utilize fleet maintenance software system tablet to fully document equipment repair and parts used.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Other duties as assigned by manager.SUPERVISION:N/ARELATIONSHIPSInternal: All Fleet Technicians, Drivers, Coordinators and ManagerExternal: Dealer Service ManagersWORK ENVIRONMENTOnsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility.MINIMUM QUALIFICATIONS Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic.Diagnostic and troubleshooting ability using fleet maintenance software.Successfully demonstrated independent analytical and problem-solving skills.Must furnish own personal hand tools.Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.EDUCATIONHigh school diploma or equivalent required.CERTIFICATIONS/TRAININGBrake certificationLICENSESMust possess a valid driver's license.PREFERRED QUALIFICATIONSJPRO software experience.Welding abilityKnowledge with electrical schematicsBasic Microsoft Excel and Word skills.Leadership experience or qualificationsValid Class A CDL license and DOT certificationEPA 608 (Type 2 or Universal) certificationPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyThe following information is provided in accordance with certain state and local laws. Compensation depends on experience, geographic locations, and other factors permitted by law. In New York, the expected compensation for this role is $33.00 – $45.00/hour This role is also eligible for overtime compensation. Benefits for this role include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift)2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs)3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel)4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps)5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)

Join Our Community of Food People!Ready to build a career with a company that’s leading the food service industry We Help You Make It!Our Diesel Mechanics start at $33.00 – $45.00/hour depending on experience!401K with 2% automatic company contribution plus company match up to an additional 6%.Medical Benefits Start Day One!We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage. $5,000 Retention bonus!Paid vacation time, sick, and personal time.Employee uniforms provided.$125 Quarterly tool allowance. $500.00 annually.Employee referral program. $1,000 per referralStrong Safety Culture, newer equipment, and excellent local leadership.Schedule:Sunday - Thursday Nights4:00 PM - 12:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES Independently troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within DOT standards.Mentor other maintenance shop personnel.Receive road calls, assign third party vendor, and work with business partners to triage appropriate plan of action including equipment swaps etc.Utilize fleet maintenance software system tablet to fully document equipment repair and parts used.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Other duties as assigned by manager.SUPERVISION:N/ARELATIONSHIPSInternal: All Fleet Technicians, Drivers, Coordinators and ManagerExternal: Dealer Service ManagersWORK ENVIRONMENTOnsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility.MINIMUM QUALIFICATIONS Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic.Diagnostic and troubleshooting ability using fleet maintenance software.Successfully demonstrated independent analytical and problem-solving skills.Must furnish own personal hand tools.Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.EDUCATIONHigh school diploma or equivalent required.CERTIFICATIONS/TRAININGBrake certificationLICENSESMust possess a valid driver's license.PREFERRED QUALIFICATIONSJPRO software experience.Welding abilityKnowledge with electrical schematicsBasic Microsoft Excel and Word skills.Leadership experience or qualificationsValid Class A CDL license and DOT certificationEPA 608 (Type 2 or Universal) certificationPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyThe following information is provided in accordance with certain state and local laws. Compensation depends on experience, geographic locations, and other factors permitted by law. In New York, the expected compensation for this role is $33.00 – $45.00/hour This role is also eligible for overtime compensation. Benefits for this role include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift)2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs)3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel)4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps)5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)

Join Our Community of Food People!Ready to build a career with a company that’s leading the food service industry We Help You Make It!Our Diesel Mechanics start at $33.00 – $45.00/hour depending on experience!401K with 2% automatic company contribution plus company match up to an additional 6%.Medical Benefits Start Day One!We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage. $5,000 Retention bonus!Paid vacation time, sick, and personal time.Employee uniforms provided.$125 Quarterly tool allowance. $500.00 annually.Employee referral program. $1,000 per referralStrong Safety Culture, newer equipment, and excellent local leadership.Schedule:Sunday - Thursday Nights4:00 PM - 12:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES Independently troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within DOT standards.Mentor other maintenance shop personnel.Receive road calls, assign third party vendor, and work with business partners to triage appropriate plan of action including equipment swaps etc.Utilize fleet maintenance software system tablet to fully document equipment repair and parts used.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Other duties as assigned by manager.SUPERVISION:N/ARELATIONSHIPSInternal: All Fleet Technicians, Drivers, Coordinators and ManagerExternal: Dealer Service ManagersWORK ENVIRONMENTOnsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility.MINIMUM QUALIFICATIONS Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic.Diagnostic and troubleshooting ability using fleet maintenance software.Successfully demonstrated independent analytical and problem-solving skills.Must furnish own personal hand tools.Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.EDUCATIONHigh school diploma or equivalent required.CERTIFICATIONS/TRAININGBrake certificationLICENSESMust possess a valid driver's license.PREFERRED QUALIFICATIONSJPRO software experience.Welding abilityKnowledge with electrical schematicsBasic Microsoft Excel and Word skills.Leadership experience or qualificationsValid Class A CDL license and DOT certificationEPA 608 (Type 2 or Universal) certificationPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyThe following information is provided in accordance with certain state and local laws. Compensation depends on experience, geographic locations, and other factors permitted by law. In New York, the expected compensation for this role is $33.00 – $45.00/hour This role is also eligible for overtime compensation. Benefits for this role include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift)2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs)3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel)4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps)5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)

Join Our Community of Food People!Ready to build a career with a company that’s leading the food service industry We Help You Make It!Our Diesel Mechanics start at $33.00 – $45.00/hour depending on experience!401K with 2% automatic company contribution plus company match up to an additional 6%.Medical Benefits Start Day One!We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage. $5,000 Retention bonus!Paid vacation time, sick, and personal time.Employee uniforms provided.$125 Quarterly tool allowance. $500.00 annually.Employee referral program. $1,000 per referralStrong Safety Culture, newer equipment, and excellent local leadership.Schedule:Sunday - Thursday Nights4:00 PM - 12:30 AMESSENTIAL DUTIES AND RESPONSIBILITIES Independently troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within DOT standards.Mentor other maintenance shop personnel.Receive road calls, assign third party vendor, and work with business partners to triage appropriate plan of action including equipment swaps etc.Utilize fleet maintenance software system tablet to fully document equipment repair and parts used.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Other duties as assigned by manager.SUPERVISION:N/ARELATIONSHIPSInternal: All Fleet Technicians, Drivers, Coordinators and ManagerExternal: Dealer Service ManagersWORK ENVIRONMENTOnsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility.MINIMUM QUALIFICATIONS Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic.Diagnostic and troubleshooting ability using fleet maintenance software.Successfully demonstrated independent analytical and problem-solving skills.Must furnish own personal hand tools.Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.EDUCATIONHigh school diploma or equivalent required.CERTIFICATIONS/TRAININGBrake certificationLICENSESMust possess a valid driver's license.PREFERRED QUALIFICATIONSJPRO software experience.Welding abilityKnowledge with electrical schematicsBasic Microsoft Excel and Word skills.Leadership experience or qualificationsValid Class A CDL license and DOT certificationEPA 608 (Type 2 or Universal) certificationPhysical Requirements:JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting OccasionallyThe following information is provided in accordance with certain state and local laws. Compensation depends on experience, geographic locations, and other factors permitted by law. In New York, the expected compensation for this role is $33.00 – $45.00/hour This role is also eligible for overtime compensation. Benefits for this role include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift)2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs)3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel)4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps)5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)