Job Description:We are seeking a Senior RF Engineer to design, develop, and test discreet transmit/receive (Tx/Rx) RF modules for advanced radar applications. The ideal candidate will have a strong background in RF circuit design, system integration, and performance optimization, with hands-on experience in taking designs from concept to production.Key Responsibilities:Design, simulate, and develop discreet RF Tx/Rx modules for radar systems.Conduct RF system-level analysis, link budget calculations, and trade-off studies.Select and integrate components such as mixers, amplifiers, oscillators, and filters.Perform schematic capture, PCB layout reviews, and work closely with layout engineers to ensure optimal high-frequency performance.Conduct laboratory testing, tuning, and validation of RF modules against specifications.Collaborate with cross-functional teams including firmware, mechanical, and systems engineering to ensure seamless product integration.Support troubleshooting and root cause analysis for performance anomalies.Maintain comprehensive documentation for design decisions, test results, and compliance requirements.Compensation Range: $99,100 - $128,800The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Required Qualifications:Bachelor’s degree in Electrical Engineering, RF Engineering, or related field.5–8 years of experience in RF design, with a focus on radar or similar high-frequency applications (L,S,C, and X band).Proficiency in RF simulation tools (e.g., Keysight ADS, HFSS, CST, or similar).Proficiency in schematic capture and PCBA layout tools (e.g. Altium Designer, PADS, Allegro)Hands-on experience with RF test equipment (VNA, spectrum analyzers, signal generators, power meters).Solid understanding of RF/microwave circuit theory, impedance matching, noise figure, and gain optimization.Experience with PCB design for RF and microwave circuits.Familiarity with military or aerospace standards for RF systems is a plus.US Citizenship and ability to obtain/maintain a security clearance.Preferred Skills:Knowledge of phased-array radar architectures.Electronics packaging conceptsFamiliarity with thermal and mechanical considerations in high-frequency module packaging.Citizenship Requirements:Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3).Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Join Our Team as a Quality Engineer at Superior Metals Manufacturing! About the Role: Superior Metals Manufacturing is seeking a highly motivated and detail-oriented Quality Engineer to join our team in Chittenango, NY. This role is integral to our commitment to manufacturing excellence and customer satisfaction. The Quality Engineer will work closely with internal departments, suppliers, and customer representatives to ensure compliance with quality standards and regulatory requirements. In this role, you will champion our Business Management System (BMS) and Advanced Quality System (AQS), driving continuous improvement initiatives and fostering a culture of quality throughout the organization. Location: Chittenango, NY (On-site)Employment Type: Full-TimeSalary: $80,000 - $100,000, but will be evaluated depending on candidates’ knowledge, skills, and abilities.Key Responsibilities: Serve as the primary quality assurance contact for assigned customers, ensuring proactive communication and resolution of quality-related issues.Lead and coordinate technical quality efforts across engineering, manufacturing, and purchasing teams to meet and exceed customer expectations.Conduct and support customer product, system, and qualification audits, ensuring accurate and timely documentation.Assist in the review and disposition of customer contracts, specifications, purchase orders, and technical documentation.Develop, implement, and monitor Corrective and Preventative Action (CAPA) plans to address nonconformances and prevent recurrence.Actively participate in risk assessments, process improvement initiatives, and root cause analysis activities.Promote and support continuous improvement through lean methodologies, quality training, and cross-functional collaboration.Maintain up-to-date knowledge of industry standards and technological advancements in quality systems and analytical tools.Support internal and external audit activities, including AS9100, NADCAP, ISO17025, and A2LA audits.Contribute to internal quality metrics and reporting to track progress against goals.Support the development and implementation of operational training structures; ensure all employees complete required training and remain compliant with quality standards and procedures.Provide input for quote reviews, inspection planning, and development of shop floor instructions.Be available to support operations outside of standard business hours, including evenings and weekends as needed. Required Qualifications: Bachelor’s degree in Engineering, Quality, or a related technical discipline, OR an equivalent combination of education and experience.Minimum 2 years of experience in a quality engineering or quality systems role within a manufacturing environment.In-depth knowledge of quality standards and frameworks, including AS9100, NADCAP, ISO17025, and A2LA.Proficiency in quality tools and methodologies such as root cause analysis, FMEA, 5 Whys, Pareto analysis, and control plans.Strong analytical and problem-solving skills, with the ability to interpret complex technical documents and specifications.Excellent communication skills, with the ability to collaborate effectively across departments and with external stakeholders.Demonstrated ability to manage multiple priorities in a fast-paced, deadline-driven environment.Proficiency in Microsoft Office Suite and familiarity with ERP and quality management systems.Ability to work on-site at our Chittenango, NY facility and accommodate occasional extended hours based on operational needs. Preferred: 3–5 years of experience in the aerospace, investment casting, or metal manufacturing industry.Working knowledge of Six Sigma, Lean Manufacturing, or Theory of Constraints (TOC) principles.Experience with contract review, inspection planning, and regulatory compliance in a customer-facing role.ASQ certification (CQE, CQA, or similar) is a strong plus.Key RelationshipsCollaborate with the Quality Manager, Lab Manager, Sales Manager, Process Engineers, and Manufacturing LeadersRepresent quality interests in customer interactions and internal initiatives Why Join Us At Superior Metals Manufacturing, we take pride in more than just what we makewe take pride in how we make it. By joining our team, you'll be part of a dynamic and growing company where innovation, craftsmanship, and quality are at the heart of our culture. We foster an environment of collaboration and continuous learning, where every team member’s voice matters and contributions are valued. Whether you're developing cutting-edge aerospace components or streamlining a process on the production floor, you’ll be making an impact every day.We offer:Innovative Environment: Work in a state-of-the-art melt shop.Collaborative Environment: Work alongside dedicated professionals in a supportive, team-oriented setting.Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities.Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, paid vacation, bonuses and more.Ready to shape the future of manufacturing quality Apply today and bring your precision and passion to a team where your impact matters.About Us:Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a non-management positionThis is a full time position

Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingSupport construction managers in daily project planning and coordination activities.Assist in monitoring project progress to ensure alignment with timelines and budgets.Prepare and review project documents, reports, and schedules as directed.Collaborate with teams to identify and resolve project-related challenges.Conduct site visits to observe construction activities and ensure adherence to safety standards.What Are We Looking ForStrong organizational skills and ability to prioritize tasks effectively.Excellent communication and teamwork capabilities.Problem-solving aptitude with adaptability in dynamic situations.Ability to learn and apply new concepts quickly to support project objectives.Eagerness to gain practical experience in construction management.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$23.00 to $27.00 per hourEqual Opportunity Employer - Minority / Female / Veteran / Disabled.

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking fora CMM Programmer to join our team! Major Responsibilities: Ensure production goals and ship schedules are metManage staffing levels and requirementsEnsure team members remain productive Follow Leader Standard Work.Able to set up and layout castings, wax tools, wax patterns, ceramic cores and gages using standard layout equipment including manual and programmable CMMs.Responsible for CMM program development, modification and implementation in close association with Engineering.Operate, program and document layout of various manufacturing metal castings Coordinate Measuring Machine (CMM), Blue light scanner, or other measuring equipment.Understanding of Geometric Dimensioning and Tolerancing (GD&T). Interpret, read, download, and understand complex blue prints, CAD models and apply that understanding to interpret the results of layout inspection data.Ability to accurately complete and train others to complete standard and customer specific layout forms and templatesResponsible to review results, assess failures and anomalies resulting from measurement issues during the process to ensure layout results are accurate and validatedAdhere to AS9100 and ISO procedures and compliance Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or a minimum of five years related experience and/or training; or the equivalent combination of education and work experience. Prefer degrees in engineering technologies. Software: Tecnomatix Quality software (3D programming), Atos professional (Blue Light), MeasureMax. Unigraphics Compensation Range: $105,000.00 - $130,000.00 Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management positionThis is a full time position

House of Sport by DICK'S Sporting Goods is more than just a store. It is a destination, an experience, a place where athletes can experiment and play. A retail store devoted to sport where our community can gather and be inspired. We are fundamentally changing retail by elevating these experiences, delivering first in class service, obsessing over our athletes, inspiring our teammates, and challenging retail norms.We are committed to creating an inclusive and diverse workforce, reflecting the communities we serve. On our team, everyone plays a critical role in creating confidence and excitement by personally equipping athletes to achieve their dreams.If you are ready to obsess over the athlete and make a difference in your community, apply to join our team today!OVERVIEW:ROLE RESPONSIBILITIES:Essential Job Functions:Assist in planning all DSG-led events, in collaboration with Community Leadership team, including cost planning, ROI analysis, staffing coverage, internal and external communication, event day-of execution (setup to tear down) and ensuring all appropriate event waiver needs are in 100% compliance.Become an expert on all event space capabilities; provide information on event space configurations and capacities and recommend the most effective set up for the event type based on event space availability.Work with Community & Events Manager to ensure events are within budget. Work together to identify opportunities for efficiencies and cost savings on all events.Create event documentation to include: Run of Show, Event Recaps, Emergency Information card and Rental Agreements.Oversee the event experience and guide our athletes to have fun and participate safely.Leads and monitors reservations scheduling tool.Manage the needs of Field events, assisting with hiring referees, equipment maintenance, field/ice rink maintenance, (if applicable).Coordinate event entertainment, including music selection, guest speakers, etc.Maintain cleanliness/maintenance & equipment needs for store events.Community & Customer FocusBuild relationships with local schools, community organizations, sports leagues, home school organizations, and vendors for event partnership.Work with the Community Team to bring clinics, camps, and afterschool programming to the store.Create sales opportunities for future events during client liaisons and events.Attend, monitor, and gather feedback from events to ensure athlete satisfaction.Provide a high-touch, innovative experience for all seasonalprogramming. Scheduling & Operations: Maintain all Field equipment and other programmable spaces for proper use and cleanliness. Must safely and effectively remove snow from ice surface and surrounding areas to maintain a safe and clean environment for our athletes (if applicable). Work with store management to offer sales and operations support when needed.Adjust priorities and manage time wisely in a fast-paced, ever-changing environment.Adhere to established policies and procedures related to safety, loss prevention and standard operating procedures, as well as to laws and guidelines of external governing entities.Understand and follow all ice rink policies and procedures in the training by Magic Ice (if applicable).Ensure proper operation of all ice venue special events, open skating and holiday promotions (if applicable).Sharpen rental and athlete skates as needed (if applicable).Perform other tasks as assigned.Mentoring & Developing Talent: Ensure all events are staffed and well communicated to teammates while level setting expectations of Athlete engagement and activation execution.Assist with training teammates on Company procedures and programs; this includes new teammate training and cross-training current teammates.Train and mentor new hires by sharing experience, knowledge, and best practices. Share timely feedback on projects, tasks, and deliverables (on the job training)Provide outstanding teammate training and coaching to deliver on the store vision and experience.QUALIFICATIONS:High School Diploma or equivalent1-3 years experienceAt least 2 years of customer service experience preferred.Previous experience in event planning experience, a mix of profit & non-profit experience is ideal#DSGT1Targeted Pay Range: $18.50 - $28.25. Starting rate of pay may vary based on factors including, but not limited to, location, experience and position offered. The actual hourly rate will equal or exceed the required minimum wage applicable to the job location.DICK'S Sporting Goods complies with all state paid leave requirements. We also offer a generous suite of benefits. To learn more, visit www.benefityourliferesources.com.Based on the location of the House of Sport, you may be required to submit relevant state mandated clearances to supervise minors.

Job Description:We are seeking a Level 4 Senior Staff RF Antenna Engineer with deep expertise in antenna systems, element/mutual coupling, and free-space radiation performanceand the proven ability to rapidly evaluate, troubleshoot, and optimize existing antenna designs. This is a high-impact, fast-response role supporting programs where performance shortfalls must be diagnosed and corrected on aggressive timelines. You will bridge simulation, measurement, and practical implementation to deliver solutions that workquickly and reliably.Key Responsibilities:Rapidly assess existing antenna and array designs for performance gaps against requirements.Diagnose and resolve issues related to mutual coupling, beam distortion, impedance mismatch, and bandwidth limitations.Recommend and implement design modifications for immediate performance improvements.Perform accelerated free-space radiation pattern measurements and compare results against simulations.Run high-fidelity EM simulations (HFSS, CST, FEKO, or similar) under compressed schedules for fast validation.Evaluate antenna integration into host platforms for mechanical, thermal, and electrical compatibility.Support urgent production and field troubleshooting, including on-site technical interventions when required.Collaborate with RF systems engineers to ensure antenna performance aligns with system-level budgets and phase stability.Produce clear, actionable evaluation reports for program stakeholders, often under short deadlines.Mentor junior engineers in rapid diagnostic and problem-solving methods.Compensation Range: $112,900 - $146,800The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Required Qualifications:Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred).10+ years of antenna design and/or evaluation experience in radar, communications, or EW systems.Expert understanding of antenna theory, EM propagation, polarization, and impedance matching.Proven ability to mitigate mutual coupling in dense or phased-array configurations.Experience delivering high-quality antenna evaluations and solutions under aggressive timelines.Proficiency with EM simulation tools such as HFSS, CST, FEKO, GRASP.Hands-on experience with antenna measurement in both anechoic chambers and open-air ranges.US Citizenship with ability to obtain and maintain a security clearance.Preferred Skills:Experience with low-observable and conformal antenna designs.Familiarity with wideband, multiband, and frequency-agile antenna systems.Exceptional problem-solving and communication skills for high-pressure, time-sensitive projects.Citizenship Requirements:Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES Demonstrated ability to understand and work with advanced “shop” mathematical concepts.High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming.Excellent analytical and problem solving and resolution capability.Enthusiasm, drive, and work ethic in an ‘on-time’ environment.Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues.Demonstrates a solid understanding of 3D modeling software.Has the ability to create training materials and train shop floor employees.Possesses creative thinking skills and is a detail-oriented personality.Is able to communicate well to other members of the development team.Eliminate waste and elevates productivity using Lean Manufacturing program.Participate in the startup of new equipment.Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers.Adhere to AS9100 and ISO procedures and complianceEnsures all equipment controls are accurately defined and maintained.Contributes to team effort by accomplishing related results as needed.Responsible for adherence to all safety policies, practices and procedures.Ability to work flexible hours and demonstrate reliability.Ability to work at Chittenango facility. QUALIFICATIONS Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred.Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines.Knowledge of 3D modeling software and Gcode a must.Familiar with Motion Control and Vision.Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues.Experience and skill in troubleshooting control systems.Knowledge of GD&T practicesExperienced in interpretation of technical drawingsExperience with Coordinate Measurement Machine programming a plus CPP-Syracuse offers its employees a competitive compensation package which includes medical/dental/vision, Employer subsidized 401K, and life insurance. Check us out at www.cppcorp.com to learn more about our products and CPP Corporation. CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management positionThis is a full time position

Job Description:Saab, Inc., a global aerospace and defense solutions leader, seeks a creative and results-driven Engineering Operations Analyst for our Surveillance Division. This position will work from our East Syracuse facility and is open to a hybrid work schedule.As an Engineering Operations Analyst, you will support the execution of complex engineering programs by enabling engineering operational (EngOps) efficiency, driving engineering process improvements, developing and utilizing engineering metrics to ensure efficient and predictable engineering performance. You will interface with several parts of the organization including Engineering, Program Management, Quality and Operations.The ideal candidate possesses a multidisciplinary background that combines expertise in engineering, data analysis, and the optimization of engineering processes.The Engineering Operations Analyst is responsible for transforming data into actionable insights to unlock the productivity of the engineering team, analyzing engineering and performance trends.A strong understanding of development processes, program execution and financial dynamics, the Engineering Operations Analyst empowers stakeholders to make informed decisions that enhance operational efficiency and promote growth.Responsibilities include:Maintain and optimize engineering operations metrics (e.g. velocity, on-time delivery, defect rates).Support integration of tools such as JIRA, Confluence, PLM systems, or requirements management platforms.Contribute to process improvement initiatives, focusing on engineering lifecycle efficiency and team scalability.Assist with compliance to engineering standards, design reviews, and documentation requirements.Identify opportunities for improving engineering processes through data analysisCompensation Range: $90,000 - $112,500The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Bachelor’s degree in Systems Engineering, Engineering Management, Industrial, Engineering, Operations Research/Management or related fields.5+ years of experience in similar roleRequired Skills:Foundational experience in engineering and development processes.A solid understanding of data analysis, visualization, and modeling tools.Analytical, critical thinker with an ability to transform raw data into actionable insights.Ability to forecast resource needs (personnel, finances, and capital assets) to achieve business goals.Performance measurement through defined engineering metrics for teams and processesExceptional communication and presentation abilitiesEligibility to obtain a Secret level security clearanceExperience working within a matrix organization­Desired Skills:Business Analytics, Informatics, and Data MiningHands-on experience with Advanced Excel, PowerBI, or similar business intelligence frameworksValue stream, value network, or similar process mapping and improvement experienceCitizenship Requirements:Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job SummaryThe Licensed Practical Nurse (LPN) provides general nursing care to patients, families and caregivers in the Medical Group practices.The Licensed Practical Nurse (LPN) assists and advocates for the patient and families health in support of the patient centered approach and delivery model of care, and is an active care team member.Responsible for collaborating with physicians/ providers , registered professional nurses and multidisciplinary care team members.A Licensed Practical Nurse (LPN) can perform tasks and responsibilities within the framework of case finding, health coaching, and supportive care under the direction of the registered professional nurse or licensed physician or licensed health care provider.Nursing shall perform in accordance with the standards outlined for Licensed Practical Nurse (LPN) in the NYS Education Law, NYS Office of the Professions, andby the State Nurse Practice Act.A Licensed Practical Nurse will follow the mission, vision, I-CARE values, policies and procedures of Mohawk Valley Health System.Core Job ResponsibilitiesGather patient measurements and collect patient dataRecordand reportpatient findingsPrepare patient for patient examination and treatmentAssistswith examination and treatmentsPerformtasks within the framework of supportive care, under the clinical direction of licensed health care provider or registered professional nurseSupportself-care , self- management and the established plan of care.Utilize standard precautions and practice at all timesMaintain equipment, supplies, inventory, and a safe and clean work environmentMaintain technical knowledge by attending educational workshops, mandatory in-services; reviewing publications and participating in department committee meetings or work groupsEngage in quality improvement initiatives including continuing education, participation in system-wide and department specific teamsMaintain a cooperative relationship among the healthcare team by effectively communicating informationRespond to patient requests, communicates effectively to the licensed health care provider who can fulfill the patient requestEducation/Experience RequirementsRequired:Graduate of an accredited school of licensed practical nursing programPreferred:Bachelors or Masters of Science in Nursing from accredited nursing programLicensure/Certification RequirementsRequired:Current New York State licensure as a Licensed Practical Nurse;Basic Life Support Certification - Must receive BLS certification within 6 weeks of hire dateDisclaimerQualified applicants will receive consideration for employment without regard to their age, race, religion, national origin, ethnicity, age, gender (including pregnancy, childbirth, et al), sexual orientation, gender identity or expression, protected veteran status, or disability.Successful candidates might be required to undergo a background verification with an external vendor.Job DetailsReq Id 94980Department MG - PRIM - WATERVILLEShift DaysShift Hours Worked 8.00FTE 1Work Schedule HRLY NON-UNION-8 HREmployee Status A1 - Full-TimeUnion Non-UnionPay Range $21 - $31.69 Per Hour

Talkiatry is led clinically by Dr. Georgia Gaveras, a board-certified child, adolescent and adult psychiatrist with an additional board-certification in addiction medicine.At Talkiatry, that means our psychiatrists are in control of their practice. Our support staff focuses on removing administrative duties, enabling you to spend more of your time on patient care. It also means providing flexibility in where and when you practice medicine. Our psychiatrists also enjoy control over their hours and schedule.We provide in-network, outpatient treatment for children and adults with depressive, anxiety, attention, and other disorders. Talkiatry does not provide intensive outpatient or partial hospitalization programs.We believe that solving the accessibility issues in mental health care begins with taking care of our doctors. We provide solutions to the challenges that psychiatrists are facing - from a lack of front and back-office infrastructure and support in private practice settings to being overworked and underpaid by hospitals, clinics, and other institutions. Talkiatry aims to bridge the current gap in outpatient psychiatry by providing high quality, respected medical care in a modern setting with modern tools.Through proprietary technology developed by psychiatrists for psychiatrists, we empower you to treat the conditions and population you enjoy, building a practice you find both satisfying and intellectually challenging.Talkiatry believes that psychiatric care should be affordable for patients and accepts all major insurance. As an integrated practice, we have a large in-house billing and patient care coordinator team that handles billing and administrative issues for our clinical staff.To learn more, please visit us atwww.talkiatry.com.Talkiatry participates in E-Verify and will provide the federal governmentwith your Form I-9 information to confirm that you are authorized to work in the U.S. only after a job offer is accepted and Form I-9 is completed. For moreinformation on E-Verify,please visit the following:EVerify Participation&IER Right to Work.At Talkiatry, we are an equal opportunity employer committed to a diverse, inclusive and equitable workplace and candidate experience. We strive to create an environment where everyone has a sense of belonging and purpose, and where we learn from the unique experiences of those around us.We encourage all qualified candidates to apply regardless of race, color, ancestry, religion, national origin, sexual orientation, age, citizenship, marital or family status, disability, gender, gender identity or expression, pregnancy or caregiver status, veteran status, or any other legally protected status.Talkiatry was built for Psychiatrists, by Psychiatrists and offers the stability and support of a hospital group with the autonomy of a private practice. We are currently seeking 100% Remote BC/BE Psychiatrists to join our national team as we continue to expand across the US.Our PromisesMarket-leading compensation. Competitive base salary coupled with productivity-based income. You retain a high percentage of your earnings; we pay at the top of the market.Comprehensive employee benefits packagedesigned specifically for high earning physicians and we cover up to 100% of your healthcare premiums, even for large families.Lighter administrative burdenandschedule flexibility. You can focus on providing great care, while maintaining control over your schedule. We will handle patient scheduling, billing, and various other support functionsTheefficiencyof Talkiatry’s practice benefits you.Oursingle specialty focus, scale and technologyallows for better reimbursement rates while maintaining lower practice expenses which enables us to pass the economic benefits to our psychiatrists.Custom developedtechnology driven solutions for psychiatryincluding an integrated EMR which supports provider-to-patient messaging, telemedicine, direct lab integration and proprietary tools to track and gain insight into your patients’ outcomes.Select apatient populationaccording to your own criteria and preferences. Our patient intake process is robust and can be adjusted in real time to allow you to balance the acuity and diagnoses of the patient population you are treating.You decide what allotted time is appropriate for your patients. Minimum of 60 minutes for intakes and 30 minutes on follow up visits.Strong in-house referral networkthat allows you to refer patients to specialists and therapists whose practice exclusively supports patients our psychiatrists are actively treating. Best of all, clinical information is shared seamlessly through our EMR.Our BenefitsHealth, Dental, Vision Insurance: Up to 100% of insurance premiums100% Employer paid malpractice coverageCompetitive 401K match with immediate participationPTO, sick time and 11 paid holidaysPre-tax commuter benefitsCME allowanceFlexible scheduling and patient criteria in a remote, telehealth environmentFew administrative burdens with full-time, on-site billing and scheduling servicesLicensing support- Our in-house licensing department will be happy to assist in managing this process for you, and we cover the costs up frontTechnology package is providedIn addition to a highly competitive Benefits plan, Talkiatry’s Full Time Psychiatrists compensation plan totals ~$300K- $350K+ annually, which consists of a base salary, in addition to a monthly productivity incentive; monthly productivity incentive is guaranteed throughout clinician’s onboarding ramp up period.Your QualificationsBoard eligible or certified in Psychiatry.Subspecialties strongly encouraged to apply.Active and unrestricted license to practice medicine. We can assist in obtaining licensure as needed.Excellent clinical knowledge and communication skills.A willingness to learn new or streamlined EMR tools.A proactive approach with a strong work ethic and desire to participate in a collaborative environment.A commitment to high-quality, cost-effective health care.Questions Reach out to us at.