FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

We are looking for a Tire and Lube Technician with a passion to service vehicles. If this is, you and you’re ready for your next destination then you have cruised to the right spot! Apply today and shift your career into drive for tomorrow! Wage = 17.50/hr Not only do you get to be part of an organization where you Drive your Potential and Power your Passion you get major perks and discounts! Just to name a few Hertz perks: Up to 40% off the base rate of any standard Hertz rental Take advantage of Hertz negotiated discounts (Travel,Tickets- movies, concerts, theme parks, Electronics, Food, Fitness)Credit Union Access Health & Wellness benefits Tuition Reimbursement Pet Insurance Paid Parental Leave Career Growth with hands on learning Educational Background: High School Diploma or equivalent preferred Professional Experience: Entry level position with no required experiencePreferred prior experience with automotive repair (personal or professional) Knowledge: Must be able to perform vehicle repairs with oversightAbility to use shop equipment such as lifts, tire changing equipment, alignment machines, and scan tools Additional Notes: Must have tools to perform necessary repairsMinimum tools needed for the job.3/8” and ½” impact wrenchSockets wrench - metric and standard - preferably long and short lengths.Oil Filter wrenches and toolsTPMS tool - reset tire sensorsCombo wrenchesScrewdriversMust have a Valid Driver’s LicenseThe Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The Hertz Corporation is one of the largest worldwide airport general use vehicle rental companies, and the Hertz brand is one of the most recognized in the world. US EEO STATEMENT At Hertz, we champion and celebrate a culture of diversity and inclusion. We take affirmative steps to promote employment and advancement opportunities. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company. Individuals are encouraged to apply for positions because of the characteristics that make them unique. EOE, including disability/veteran

Job InfoJob Location: Queens County, NYRoute Type: LocalType of Assignment: Direct HireHours Per Shift: 8 HoursHours Per Week: 40 HoursShift Start Time: 08:00 amWorking Days: Mon-FriTransmission Type: AutomaticJob RequirementsAdditional InformationMaintenance Mechanic - Earn $1,200-$1,400+ WeeklyPosition: Full-TimePay: $1,200 - $1,400+ per weekSchedule: Monday - Friday, with some Saturdays as neededLocation: Flushing, NYAbout the JobWe’re looking for an experienced Maintenance Mechanic. You’ll work hands-on to maintain, repair, and upgrade essential equipment.What You’ll DoPreventative Maintenance: Lead routine maintenance to keep downtime low.Repair & Troubleshoot: Fix equipment issues and keep machinery to spec.Welding & Adjustments: Perform needed welding repairs and make equipment adjustments.Refrigeration Monitoring: Oversee and maintain refrigeration systems.Project Support: Assist with equipment upgrades and installations.Daily Communication: Work with Quality Control, Supervisors, and Operators to meet production goals.Documentation: Report issues promptly to supervisors in writing and verbally.What You NeedExperience: 3-5 years in manufacturing maintenance.Mechanical Skills: Expertise in machining, welding, hydraulics, pneumatics, and fabrication.Tech Skills: Basic proficiency with Microsoft Word and Excel.License: Refrigeration Engineer’s License a plus, but not required.Physical Ability: Able to lift, push, or pull up to 60 lbs.Flexibility: Open to working 1st, 2nd, or 3rd shifts, weekends, and holidays.Preferred SkillsLOTO (Lockout/Tagout) safety experienceFamiliarity with Videojets, blow molders, and conveyor systemsKnowledge of motors, pumps, valves, seals, bearings, and electrical control systemsExperience with lathes, drills, grinders, and milling machinesPLC experienceRefrigeration Engineer's license is a plusBenefitsCompetitive weekly payTraining and career advancement opportunitiesPositive team environmentComprehensive access to tools and resourcesTo apply, please call Jessica @

Perks for Working with NFI:Career training & development opportunitiesASE Certification reimbursement & assist with study materialsApprenticeship ProgramSign-On Bonus of $2,000 paid out within the first 90 days of employmentDedicated internal company fleetNFI maintains all major tools401(K) with company matchPTO accrued on day one of employment - estimated 13 days per yearPaid Holidays - 8 days per yearMedical, Dental, RX, Vision, Disability, & Life InsuranceParental Leave according to FMLA state guidelinesBoot Allowance ProgramUniform & all safety PPE provided Schedule:Tuesday - Saturday, 10:00 p.m. to 6:30 a.m.Pay: $24 - $34 per hour- pay will be determined by experience and certificationsSign-on Bonus: $2,000NFI Division: Fleet ServicesRecruiter: Maria @ We have approved DOL Registered Apprenticeship and GI Bill® Apprenticeship Programs, which could allow qualifying service members to earn a monthly stipend of up to $2,000on top of your NFI earnings. Apply here to learn about your eligibility with our military specialists. #DT2 Pay Range: 24.00-34.00 per_hour, General Benefits: Perks for Working with NFI: Career training & development opportunities ASE Certification reimbursement & assist with study materials Apprenticeship Program Sign-On Bonus of $2,000 paid out within the first 90 days of employment Dedicated internal company fleet NFI maintains all major tools 401(K) with company match PTO accrued on day one of employment - estimated 13 days per year Paid Holidays - 8 days per year Medical, Dental, RX, Vision, Disability, & Life Insurance Parental Leave according to FMLA state guidelines Boot Allowance Program Uniform & all safety PPE providedYour responsibilities as a Diesel Technician / Mechanic will include, but are not limited to:Troubleshoot, diagnose, and repair electrical and mechanical tractor and trailer-related issues using standard testing procedures and computer diagnostic equipment such as JPRO, OEM Diagnostic Software, Multimeters, and WindowsPerformance preventive maintenance on our fleet of tractors & trailersPerform DOT inspection per FMSCA guidelinesPhysically capable to perform all job duties, which includes being able to lift and/or pull 75 lbs or more without restriction, stand or lie for extended periods, and have flexible movement to reach equipment. *GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). More information about education benefits offered by VA is available at the official U.S. government website athttps://www.benefits.va.gov/gibill. To become part of the NFI team you: Must have a valid driver's licensePreferred ability to obtain a Class B licenseTechnical or advanced degree or 2 years or more of equivalent maintenance experienceFamiliarity with troubleshooting equipment repairs and maintenance with diagnostic tools and equipment such as JPRO, OEM Diagnostic Software, Multimeters, and WindowsSuccessfully demonstrated problem-solving skillsExamples of teamwork and customer service skills, including good oral and written communication skills.On-site evaluation with recommended training All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Federal law requires employers to provide reasonable accommodation to qualified individuals with disabilities. Please tell us if you require a reasonable accommodation to apply for a job or to perform your job. Email or call PC929

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks.Our ambition is to continually improve and it’s what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it’s our people’s too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what’s best.Stop and think: how would YOU put our drinks on every table ELIGIBLE FOR SIGN-ON BONUS - $3,500! Salary Commensurate w/ Experience Shift: 10:30 PM - 6:30 AM Summary: The Maintenance Technician is responsible for the scheduled, unscheduled and preventative maintenance and repair of a wide variety of beverage manufacturing and packaging equipment requiring a strong mechanical skills base to include: hydraulics, pneumatics, electrical, conveyor systems and PLC usage. Essential Functions Effectively complete preventive and proactive maintenance per the schedule to prevent breakdowns on equipment.Utilize root-cause analysis skills to investigate breakdown and line stoppages while collaborating with other departments.Initial responder when a line stops producing and assures that the appropriate mechanical help is on site to correct any problems quickly using electrical and/or mechanical skills.Prioritizes work to ensure timely maintenance, repair and installation of equipment, tools and utility systems to minimize manufacturing downtime and completes all required paperwork and documentation in the Computerized Maintenance Management System (CMMS).Repair or maintain the operating condition of industrial production or processing machinery or equipment including inspection, assembly, disassembly, and replacement as necessary.Observe and test the operation of machinery or equipment to diagnose malfunctions, using voltmeters or other testing devices.Operate newly repaired machinery or equipment to verify the adequacy of repairs.Analyze test results, machine error messages or information obtained from operators to diagnose equipment problems.Inspects operating machines and equipment for conformance with operational and safety performance standards.Support the facility’s food safety and food quality programs to assure compliance and achieve desired results.Perform other duties as required by supervisor. Requirements Education & Experience: Three (3) plus years' experience in industrial manufacturing maintenance required.Electrical/electronic troubleshooting and repair skills required.Candidates will be required to take a Mechanical (Electrical) Skills and Aptitude Assessment in order to be considered. Position-Specific Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.Demonstrated ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals.Ability to use Microsoft Office (Outlook, Word, Excel).Ability to work flexible hours if needed. Physical Requirements Must be able to occasionally lift and/or carry up to 50 pounds.Must be able to push and/or pull up to 25 pounds.Must be able to continuously stand and/or walk for extended periods of time on concrete surface.Ability to repeatedly kneel, bend, crouch, reach, climb and/or stoop throughout the shift as needed to successfully perform job duties.Successful completion of a post-offer drug screen and background check required. A Career with RefrescoRefresco offers a competitive salary and comprehensive benefits, which include: • Medical/dental/vision insurance • Life insurance • 401(k) savings plan with company match • Paid holidays and vacation • Well-being benefits • Discount programs Join Refresco TODAY and enjoy a rewarding CAREER! Any employment agency, person, or entity that submits a rsum to this career site or a hiring manager does so with the understanding that the applicant's rsum will become the property of Refresco Beverages, Inc. Refresco Beverages, Inc. will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity. Employment agencies that have agreements with Refresco Beverages, Inc., and have been engaged in a search shall submit rsum to the designated Refresco recruiter or, upon authorization, submit rsum to this career site to be eligible for placement fees. Refresco is an Equal Opportunity Employer. All qualified applicants will be considered without regard to race, national origin, color, religion, age, genetics, sex, sexual orientation, gender identity, disability or veteran status. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

C3 Mechanic Full-Time Location: Chester, NY Compensation: $28.22 up to $34.23 based on experience Now Hiring!Coach USA is looking for Maintenance Mechanics of all levels to join our Chester, NY location. Under the supervision of the Maintenance Manager a Maintenance Mechanic performs highly skilled preventative maintenance, and diagnostic and repair work on motor coaches to minimize downtime and ensure a positive customer experience.What we offer: Paid weekly/Direct depositMedical, Dental, VisionFlexible Spending Account ($3,300)Dependent Care Spending Account (Daycare $5000)Company-sponsored Life insurance ($100k)401k Retirement Plan with Company matchVacation10 Paid Holidays7 PTOFloating HolidaysBirthdayTool/Boot Allowance annuallyEmployee Discounts through LifeMart and Tickets at Work (Travel, Hotels, Car Rentals, Theme Parks, Electronics, Childcare and more )Save up to 15% on Verizon Wireless Bill with Employee DiscountSamsung save@workHUSK Marketplace (discounts on Fitness, Nutrition, Mental Health, and more)Perfect Attendance $100 (every 6 months)Union ShopGarage Kept buses Responsibilities: Inspect, diagnosis and replace components on Motor Coaches as neededMinor body work as neededPMI repairsUtilize most specialized purpose shop tools, such as steam cleaners, grease guns, as neededPerforms other duties Qualifications: High Schools DiplomaAble to work in all types of weather conditions, including outdoorsMust meet DOT Physical Qualifications, pass pre-employment drug screen/background checkCDL A/B with Passenger and Air Brake EndorsementsMust be able to attend training when directed Coach USA would love to discuss your qualifications for this position. To learn more about your next big career change!Coach USA is an Equal Employment Opportunity employer. In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class.©"lube", "mechanically inclined", "mechanic", "Mechanic apprentice", "auto mechanic", technical", "entry level mechanic"©

Forbes List of America's Best Employers Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets our customers to their destinations on timeand we’re looking to hire talented folks with a love of learning to make it all possible. Under the direction of the Superintendent or Foreman, a Special Mechanic - Welder is responsible for repairingNJ TRANSIT buses for maintenance work and handle welding tasks. Main Functions: Conducts a variety of testing, repair, installation and maintenance tasks on equipment including engines, brake systems, suspension, steering, electronics, electrical systems, HVAC, transmission, and painting equipment, as well as: 1.Ability to understand and carry out written and verbal instructions and follow established policies and procedures. 2.Be able to diagnose and repair all electric I/O Controls and Multiplex Wiring Systems. 3.Have the ability to complete wiring conversion for buses with 12v, 24v, 110v and High voltage (EV buses). 4.Must have the mechanical ability. Be able to disassemble and reassemble complete electrical components. 5.Must have a working knowledge of reading electrical schematics. Be able to diagnose and repair electrical faults including wiring repair. 6.Be able to diagnose and repair electrical components on all computer-controlled engines and transmissions. 7.Must have the ability to trouble-shoot, analyze and implement effective solutions for operational faults on hybrid vehicle systems and components. 8.Be able to trouble-shoot and repair all electrical components. 9.Working knowledge of air conditioning and electrical systems. 10.Must be able to diagnose and program with a computer all engines, transmissions, and various other systems (i.e., HVAC etc.). 11.Demonstrate ability in the proper use of tools and diagnostic equipment. 12.Must be able to use and read parts manual and be able to fill out required forms. 13.Must be willing to work overtime when required. 14.Must keep area clean, uncluttered, and safe. Must follow established shop safety policies and procedures. Education and Experience Requirements: Must have a high school diploma or GED, ASE certification a plusMust have a CDL licenseMust have five years' experience in the welding field.Be able to pass the pre-employment physical and background checksMust be certified and able to supply copies of prior certifications and able to read blueprints, sketches, and drawingsMust be willing to work overtime when required At NJ TRANSIT, you will enjoy a competitive salary and excellent benefit package: Full benefit package including medical, prescription, dental & visionPension plan plus 457 tax-deferred savings planGrowth OpportunitiesPaid time off At NJ TRANSIT, we support and depend upon the diversity of our staff. NJ TRANSIT is an Equal Opportunity Employer. This position is deemed safety sensitive per the Department of Transportation (DOT) Drug and Alcohol Testing Regulations. The DOT Drug and Alcohol Testing Regulation 49 CFR Part 40 does not authorizethe use of marijuana for any reason. It is unacceptable for any safety-sensitive employee subject to drug testing under DOT regulations to use recreational or medical marijuana. The prohibitionincludes any derivative of marijuana such as CBD oils, teas, etc. The use of recreational and medical marijuana is a violation of NJ TRANSIT’s Drug and Alcohol-Free Workplace Policy for safety-sensitive employees. INDBU2

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Job DescriptionWe are currently seeking aMaintenance Mechanicfor our manufacturing/bottling facility to maintain, fix, and improve equipment used in bottling and packaging operations.Factory Location: Jersey City, NJCompensation: $38.58 / hourSign on Bonus of $3500 after 90 days of employmentShift differential: 6%-8% of base hourly rate paid for applicable hours workedSchedule:4:00 PM - 1:00 AM, Night Shift, Monday - Friday, Full-Time Ability to work holidays and weekends per business needs Must be able to attend training on day shift for approximately three weeks.Benefits:Medical, prescription, dental, vision, life and disability insurance, 401(k) with match, company discounts, paid vacation, and much more! Employees are eligible for benefit election on day 1 of employmentSkills Required:Perform routine preventative and corrective maintenance and testing on equipment Perform maintenance tasks to include repairing and improving, from minor rebuilds to major overhauls on all equipment Identify processing waste reduction opportunities and assist in reduction projects Participate in preventative maintenance program to help reduce costs of operations through PM optimization Dismantle, clean, repair and test electrical, electronic and mechanical components to determine component-level failure Communicate, coach, and train employees to continuously improve team’s ability to prevent loss of production and respond safely to equipment failures Maintain preventative maintenance logs and accurate records of all testing and repairs Recommend equipment to be included in preventive maintenance programs Perform preventative maintenance tasks to identify all potential mechanical and electrical issues with equipment throughout the plant Rebuild worn-out, but reusable, pieces of equipment, such as gearboxes for scheduled PM’s Troubleshoot, investigate, and repair all mechanical, electrical, and pneumatic machine systems Eliminate machine failures from recurring by utilizing the Breakdown Analysis process Communicate directly with equipment suppliers, contractors, and vendors as necessary Focus areas will include but are not limited to Production support, Mechanical Room, Water Processing, Boiler Room, and Wastewater Treatment Water Chemical Treatment ProgramQualificationsHigh School Diploma, GED, or equivalent work experience; additional technical training or certifications desired Three or more years proven maintenance experience in a manufacturing environment Candidates must complete the Mechanical Aptitude Test before being considered Prior experience with high-and low-pressure compressors, chillers, water treatment, boilers is preferred Strong technical knowledge of compressed air systems (pneumatics), electrical systems, hydraulics and water processing is preferred Knowledge of bottling equipment, PM programs and SAP system preferred Must have electrical knowledge of single and three phase power including the ability to diagnose and replace electric motors Must be able to work and accomplish projects with little to zero supervision Must be able to foster and build a team-work environment Communicate effectively with operators, technicians, mechanics, and supervisors Able to read, interpret, and analyze computer generated reports and accurately complete all tasks Must be able to do physical inspections of equipment that will require climbing, reaching, and extending arms overhead Able to lift and pull 50 lbs. as needed while performing work Must be proficient reading mechanical drawings / schematics and OEM technical prints Proficient computer skills, including the use of Microsoft Office applications Available for call-ins or to cover all shifts to support production teams as required Work together with Safety department to achieve a zero-injury workplace Must display a positive mental attitude and be open to a fast paced ever changing work environmentPrimo Brands’ established portfolio includes billion-dollar brands Poland Spring® and Pure Life®, premium brands like Saratoga® and Mountain Valley®, regional leaders such as Arrowhead®, Deer Park®, Ice Mountain® Ozarka®, and Zephyrhills®, purified brands, Primo Water® and Sparkletts®, and flavored and enhanced brands like Splash® and AC+ION®. Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come.Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. If you need any assistance or accommodations due to a disability, please contact us at

Company Description: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere.At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown’s history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them.From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward.We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team.Want to Learn More Watch A Day in the Life of a Crown Field Service Technician! click here.This position is based out of our Oakland, NJ branch location and will provide coverage in surrounding areas. Job Responsibilities:Troubleshoot, diagnose, and repair Crown and all other makes of lift trucks.Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Qualifications:High school diploma or equivalent.Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics.Good written/verbal communication and customer care skills.Valid driver's license, good driving record, and ability to safely operate lift trucks.Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred.Work Authorization:Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire.No agency calls please.Compensation and Benefits:Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more.Crown also offers Service Technicians:Award-Winning Service TrainingCompany Vehicle for Field Service TechniciansTool InsuranceNo Flat Rate40 Hours Per Week plus OvertimeUniformsSpecialty ToolsPrimarily 1st ShiftCareer Advancement OpportunitiesEOE Veterans/Disabilities

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $45-$58 per hour DOE.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.JOB SUMMARYCoolSys Energy Solutions (CES) is currently seeking a CoGen Service Technician to inspect and diagnose on-site Power Generation and related equipment. Responsibilities: Must be thoroughly familiar and have detailed knowledge of all aspects of our product offerings including CHP and Balance of Plant (including not limited to HRSG, radiators, steam/hydronic boiler, absorption chiller, chiller, standby generators, automatic transfer switches, switchgear), island and parallel operation, Comap control system, Building Management Systems, all regarding assembly, repair, wiring, re-building, testing, and troubleshooting.Regularly travel to jobsite locations to perform preventive maintenance, corrective maintenance, unscheduled service, and troubleshooting, mechanical & electrical repairs on natural gas and biogas engines, generator sets, CHP power generation equipment, and related equipment.Monitoring system performance via remote control on-line, diagnoses technical malfunctions / operator errors, and provides solutions.Interface with system operators/field technicians and provides technical guidance.Performance of engine overhauls, electrical & mechanical testing, calibration and commissioning.Must provide clear and concise reports of all work performed daily for both internal and external reporting, observe and report conditions that could result in unscheduled or corrective maintenance, and communicate in a timely manner.Maintain designated project & service records, and practice consistent record keeping.Contribute to a pleasant and positive work atmosphere where all team members feel important and responsible.Adapt to the diverse needs of a small team and address internal and external requirements with flexibility and creativity.Regularly improve and update product knowledge by participating in educational and product training opportunities.This description contains information necessary to describe and evaluate the job. It should not be construed as a detailed description of all work performed but indicates the kinds of duties and skills expected.The position must complete other work tasks as assigned. Qualifications: The candidate must have a strong reciprocating engine and electrical background with the ability to display a high level of skill and understanding regarding internal combustion engines, generator sets, ideally natural gas engines, but will consider applicants that have experience with diesel standby or other engine technologies (e.g. compression engines).Will also consider technicians that have a more holistic background and excellent experience and trackrecord around complex technologies like aircraft engines and turbines.Be able to complete technical start-up of gas engines and CHP power systems.Independently diagnose and repair power systems.Basic working knowledge of advanced controls, safety shut-downs, circuit breakers and control panelwiring.Must be available to work over-time and occasionally travel on weekends.Must be able and willing to travel.Must be able to work independently.Excellent written and verbal communication skills and demonstratedproficiency composing writtencommunications.Outstanding interpersonal skills.Excellent telephone skills and computer knowledge.High energy level, comfortable performing multifaceted projects in conjunction with day-to-day activities.Resourceful, well organized, highly dependable, efficient and detail oriented.Must present a positive, professional, and team player attitude.Must be flexible and able to adapt to change quickly.Must possess a valid driver’s licenseExperience and knowledge of IP Networking including troubleshooting Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:This position performs aircraft maintenance on UPS fleet to meet or exceed airworthiness standards. Performs the change, removal, replacement, or upgrade of aircraft components to correct failures or implement changes. Conducts troubleshooting of complex pneumatic, hydraulic, engine, and structural components and systems. This position documents procedures per established processes to ensure regulatory compliance.Job Responsibilities Responsible for the maintenance and preventive maintenance of aircraftOperate and maintain UPS equipment safelyRun, taxi, and tow aircraft for the purpose of maintenance and repositioning of aircraft as trained and qualified to do soDetermines airworthiness of aircraft and components, in accordance with established procedure and Federal Aviation RegulationCompletes aircraft maintenance forms entries and enters data into a Maintenance Data Systems, ensures entries are accurate and completeServices and inspects aircraft, components, and related equipmentEnsure consistent, accurate aircraft maintenance by properly completing turnover entries on unfinished maintenance in the turnover logFollow all Maintenance Department policies and proceduresKeep a clean and orderly work environmentMake recommendations to improve functions within the Maintenance DepartmentAttend UPS assigned trainingPerform other duties as assigned by Line Maintenance Supervisor or the Director of MaintenanceRequired QualificationsMust have a High School Diploma or GED equivalent Must have a valid FAA Airframe and Powerplant license Must have a valid driver’s license Must have a minimum of three (3) years aircraft maintenance experience that could include but not limited to: Boeing, Airbus and/or McDonnell Douglas aircraft Military jet aircraft Regional /Commuter aircraft Knowledge of computer systems Troubleshooting skills and ability to read and interpret Aircraft Manuals and Illustrated Parts CataloguesFederal Aviation Administration required Drug Testing Information (FAA):As part of the UPS pre-employment process for a safety sensitive position, a drug screen is required. UPS Must receive a negative test result before you can be put into a safety sensitive position (14 CFR Part 120.107).Please be advised that you will be tested in accordance with 14 CFR Part 120.109(a)(5) and 14 CFR 120 Subpart E to determine the presence of marijuana, cocaine, opiates (including codeine, heroin-6AM, morphine), opioids-hydrocodone, hydromorphone, oxycodone & oxymorphone, phencyclidine (PCP), and amphetamines/methamphetamines (including MDMA, MDA) or metabolites of these drugs.Starting Pay:$30.13Benefits: Competitive weekly payMedical, dental, and vision after waiting periodDefined-benefit pension plan401(k)Paid vacationPaid holidaysPaid Sick and Family and Medical Leave time as required by lawDiscounted Employee Stock Purchase Program Employee Assistance Program*This job post is for EWR gateway only*Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Company Description: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. Job Responsibilities:Troubleshoot, diagnose, service, repair and install dock and door equipment. Perform all assigned planned maintenance on customer dock and door equipment.Welding. Maintain a service van and its inventory. Process paperwork after completion of each job. Qualifications:High school diploma or equivalent. Technical school graduate preferred. Mechanical and electrical aptitude.Welding experience. Good written and verbal communication and customer care skills.Valid driver's license, good driving record, and ability to safely operate lift trucks.Work Authorization:Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire.No agency calls please.Compensation and Benefits:Crown offers an excellent wage and benefits package for full-time employees. Current benefits being offered include: Competitive Wages. The anticipated starting pay range for the position is$25to $35but is commensurate with skills andrelated experience,Health/Dental/Vision/Prescription Drug Plan with a company contribution to each, Health Savings Accounts and Flexible Spending Accounts,401K Retirement Savings Plan:Crown matches 100% of the first 4% of your eligible pay you contribute to the plan.You are always 100% vested in the company matching contributions.Company paid Life and Disability Benefits as well as optional supplemental term life insurance offerings,Paid Parental Leave,9 Paid Holidays, Paid Vacation accrued at a rate based on length of service and position,Paid Sick Leave, Birthday Pay for Non-Exempt employees,Tuition Reimbursement up to $5,250 per calendar year,and much more.EOE Veterans/Disabilities

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $29 - $36 depending on experience.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: · Ability to report to work in a timely manner as scheduled by supervisor.· Repair and overhaul equipment such as compressors, water pumps, air handlers, electrical and mechanical control devises and other similar machinery.· Test malfunctioning systems and components using electrical and/or mechanical skills.· Maintain legible corporate and personal records of work history.· Provide general repair work on refrigeration, heating and ventilation equipment such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors and electric motors.· Provide preventative maintenance activities; diagnose equipment malfunctions and operating efficiency of mechanical equipment.· Perform work on minor construction and remodeling projects including startups of new installations.· Other duties as assigned. Qualifications: Education/Training· Completion of a refrigeration technician training program (HVACR) from a technical school or completion of a technical program from a JR College.· Must have a valid EPA certificate.Work Experience and Skills· 1-3 years of commercial refrigeration experience required.· Equivalent passing grade, 80% or better, on Tek Skills Level 3 test.· Experience working on refrigeration equipment in convenience stores or supermarkets a strong plus. Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.· Must have a good driving record and be able to work independently.· Emergency on-call availability is a basic requirement.· Must be able to lift up to 60 lbs. with no assistance and also be able to sit and/or stand for severa Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible formaintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations.Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Automotive Technicians must be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment. ?Responsibilities and DutiesMeets D.O.T requirements required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMust be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Must possess the required hand toolsrequired to perform the applicable job assignment. ?Vermont Safe Inspection Certified.Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/Bor A Commercial Driver's License (CDL) - PreferredDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $39.25 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.